Seismic stratigraphy of the Adare Trough area, Antarctica

The Adare Trough, located 100 km NE of Cape Adare, Antarctica, is the extinct third arm of a Tertiary spreading ridge that separated East from West Antarctica. We use seismic reflection data, tied to DSDP Site 274, to link our seismic stratigraphic interpretation to changes in ocean-bottom currents, Ross Sea ice cover, and regional tectonics through time. Two extended unconformities are observed in the seismic profiles. We suggest that the earliest hiatus (early Oligocene to Mid-Miocene) is related to low sediment supply from the adjacent Ross Shelf, comprised of small, isolated basins. The later hiatus (mid-Miocene to late Miocene) is likely caused by strong bottom currents sourced from the open-marine Ross Sea due to increased Antarctic glaciation induced by mid-Miocene cooling (from Mi-3). Further global cooling during the Pliocene, causing changes in global ocean circulation patterns, correlates with Adare Basin sediments and indicate the continuing but weakened influence of bottom currents. The contourite/turbidite pattern present in the Adare Trough seismic data is consistent with the 3-phase contourite growth system proposed for the Weddell Sea and Antarctic Peninsula. Multibeam bathymetry and seismic reflection profiles show ubiquitous volcanic cones and intrusions throughout the Adare Basin that we interpret to have formed from the Oligocene to the present. Seismic reflection profiles reveal trans-tensional/strike-slip faults that indicate oblique extension dominated Adare Trough tectonics at 32–15 Ma. Observed volcanism patterns and anomalously shallow basement depth in the Adare Trough area are most likely caused by mantle upwelling, an explanation supported by mantle density reconstructions, which show anomalously hot mantle beneath the Adare Trough area forming in the Late Tertiary.     

Crustal structure and tectonic provinces of the Riiser-Larsen Sea area (East Antarctica): results of geophysical studies

About 16,000 km of multichannel seismic (MCS), gravity and magnetic data and 28 sonobuoys were acquired in the Riiser-Larsen Sea Basin and across the Gunnerus and Astrid Ridges, to study their crustal structure. The study area has contrasting basement morphologies and crustal thicknesses. The crust ranges in thickness from about 35 km under the Riiser-Larsen Sea shelf, 26–28 km under the Gunnerus Ridge, 12–17 km under the Astrid Ridge, and 9.5–10 km under the deep-water basin. A 50-km-wide block with increased density and magnetization is modeled from potential field data in the upper crust of the inshore zone and is interpreted as associated with emplacement of mafic intrusions into the continental margin of the southern Riiser-Larsen Sea. In addition to previously mapped seafloor spreading magnetic anomalies in the western Riiser-Larsen Sea, a linear succession from M2 to M16 is identified in the eastern Riiser-Larsen Sea. In the southwestern Riiser-Larsen Sea, a symmetric succession from M24B to 24n with the central anomaly M23 is recognized. This succession is obliquely truncated by younger lineation M22–M22n. It is proposed that seafloor spreading stopped at about M23 time and reoriented to the M22 opening direction. The seismic stratigraphy model of the Riiser-Larsen Sea includes five reflecting horizons that bound six seismic units. Ages of seismic units are determined from onlap geometry to magnetically dated oceanic basement and from tracing horizons to other parts of the southern Indian Ocean. The seaward edge of stretched and attenuated continental crust in the southern Riiser-Larsen Sea and the landward edge of unequivocal oceanic crust are mapped based on structural and geophysical characteristics. In the eastern Riiser-Larsen Sea the boundary between oceanic and stretched continental crust is better defined and is interpreted as a strike-slip fault lying along a sheared margin.     

Potential vorticity estimates of absolute velocities on the Ross Sea shelf

We analyze absolute velocities on the continental shelf off Cape Adare, in the western sector of the Ross Sea (Antarctica). Such a velocity field is here inferred by using a novel inverse method of absolute velocity determination, namely the tracer PV method, related to potential vorticities of temperature and salinity. This theoretical choice allows us to directly use in situ temperature and salinity data. Moreover, it avoids high-order derivatives, which can give large uncertainties that affect estimates made using previous approaches. The tracer PV method also allows us to separately estimate the steady and non-diffusive component and the unsteady and diffusive components of the flow. The western sector of the Ross Sea is characterized by a surface layer of Antarctic Surface Water over layers of Low Salinity Shelf Water and High Salinity Shelf Water, flowing northward with average velocities ～6–7 cm/s. At ～200 m depth an intrusion of warmer and saltier Circumpolar Deep Water is also evident in our data. The steady absolute velocities are in good agreement with those obtained from the classical Margules equation, in particular regarding the northward flux of the High Salinity Shelf Water. Furthermore, velocities due to diffusive processes and mesoscale activity are discussed. Finally, a steady “thermal” approximation is discussed; it allows for a qualitative check of the results by means of temperature horizontal sections only.     

Velocity-Interface Structure of the Southwestern Ryukyu Subduction Zone from EW9509-1 OBS/MCS Data

A wide-angle seismic survey, combining ocean-bottom seismometers (OBS) and multi-channel seismic (MCS) profiling, was implemented in the southwestern Ryukyu subduction zone during August and September 1995. In this paper, we present the data analysis of eight OBSs and the corresponding MCS line along profile EW9509-1 from this experiment. Seismic data modeling includes identification of refracted and reflected arrivals, initial model building from velocity analysis of the MCS data, and simultaneous and layer-stripping inversions of the OBS and MCS arrivals. The velocity-interface structure constructed along profile EW9509-1 shows that the northward subduction of the Philippine Sea Plate has resulted in a northward thickening of the sediments of the Ryukyu Trench and the Yaeyama accretionary wedge north of the trench. The boundary between the subducting oceanic crust and the overriding continental crust (represented by a velocity contour of 6.75 km/s) and a sudden increase of the subducting angle (from 5 degrees to 25 degrees) are well imaged below the Nanao Basin. Furthermore, velocity undulation and interface variation are found within the upper crust of the Ryukyu Arc. Therefore, the strongest compression due to subduction and a break-off of the slab may have occurred and induced the high seismicity in the forearc region. This revised version was published online in November 2006 with corrections to the Cover Date.     

Accurate Modelling of Sonobuoy Refraction Data to Determine Velocity Variations in Oceanic Crust

Modern disposable sonobuoys can provide a simple and cost-effective alternative to ocean bottom seismometers for marine refraction experiments over oceanic crust. Unfortunately, the fact that they are free to drift with the prevailing ocean currents can introduce significant travel-time errors into the modelling process if the seafloor topography is large. For sonobuoys recorded during and after turns the drift rate and direction can be uniquely determined by inversion of the shot-receiver ranges derived from the water-wave arrival. The same method can be used to determine a best fitting average drift vector for the whole dataset. A modification to conventional two-dimensional travel-time modelling techniques has been developed to account for this drift. Each sonobuoy profile is divided into several subsets, typically of 100 shots each, and each subset is then modelled as a separate common receiver gather, significantly reducing the errors in the calculated travel-times. For re alistic bathymetry, the magnitude of these travel-time errors is up to 200 ms, significantly larger than the estimated picking uncertainty. Real data from a typical sonobuoy refraction experiment on the Mid-Atlantic Ridge were modelled with and without the drift correction applied. Much of the lateral variation in the velocity structure was removed when the drift correction was applied, indicating that this structure was due to variations in the travel-times caused by sonobuoy drift.     

Enhanced estimation of sonobuoy trajectories by velocity reconstruction with near-surface drifters

An investigation to improve trajectory prediction using Lagrangian data is presented. The velocity field of a data assimilating model, EAS-16, is corrected using drifter observations taken during an experiment off Taiwan. The results are tested using another independent Lagrangian data set provided by sonobuoys launched in the same area. The latter have instrument chains that extend well into the water column. Consequently the corrected model velocities were projected into the water column in order to calculate sonobuoy trajectories. The drifter and sonobuoy trajectories both show two distinct regimes in the considered area of approximately 1/2° square. One regime is dominated by shelf dynamics, the other by meandering of the Kuroshio, with a sharp boundary dividing the two. These two regimes are not reproduced by the trajectories of the EAS-16 model. When the drifter data are blended with the model velocities, synthetic sonobuoy trajectories track the observed ones much better, and the two regimes are clearly depicted. Two different methods for the velocity reconstruction are tested. One is based on a variational approach and the other on a normal mode decomposition. Both methods show qualitatively similar improvements in the prediction of sonobuoys trajectories, with a quantitative improvement in the total rms error of approximately 50% and 25%, respectively.     

Acoustic tracking of a freely drifting sonobuoy field: experimental results

This paper describes a regularized acoustic inversion algorithm for tracking individual elements of a freely drifting sonobuoy field using measured acoustic arrival times from a series of impulsive sources. The acoustic experiment involved 11 sonobuoys distributed over an 8/spl times/6-km field, with a total of six sources deployed over 72 min. The inversion solves for an independent track for each sonobuoy (parameterized by the sonobuoy positions at the time of each source transmission), as well as for the source positions and transmission instants. Although this is a strongly under-determined problem, meaningful solutions are obtained by incorporating a priori information consisting of prior estimates (with uncertainties) for the source positions and initial sonobuoy positions and a physical model for sonobuoy motion along preferentially smooth tracks. The inversion results indicate that the sonobuoys move approximately 260-700 m during the source-deployment period. Closely spaced sonobuoys move along similar tracks; however, there is considerable variability in track directions over the entire field. Positioning uncertainties in horizontal coordinates are estimated using a Monte Carlo appraisal procedure to be approximately 100 m in an absolute sense and 65 m in a relative sense. A sensitivity study indicates that the uncertainties of the a priori position estimates are the limiting factor for track accuracy, rather than data uncertainties or source configuration.     

Seismic study of the Ulleung Basin crust and its implications for the opening of the East Sea (Japan Sea)

The Ulleung Basin (Tsushima Basin) in the southwestern East Sea (Japan Sea) is floored by a crust whose affinity is not known whether oceanic or thinned continental. This ambiguity resulted in unconstrained mechanisms of basin evolution. The present work attempts to define the nature of the crust of the Ulleung Basin and its tectonic evolution using seismic wide-angle reflection and refraction data recorded on ocean bottom seismometers (OBSs). Although the thickness of (10 km) of the crust is greater than typical oceanic crust, tau-p analysis of OBS data and forward modeling by 2-D ray tracing suggest that it is oceanic in character: (1) the crust consists of laterally consistent upper and lower layers that are typical of oceanic layers 2 and 3 in seismic velocity and gradient distribution and (2) layer 2C, the transition between layer 2 and layer 3 in oceanic crust, is manifested by a continuous velocity increase from 5.7 to 6.3 km/s over the thickness interval of about 1 km between the upper and lower layers. Therefore it is not likely that the Ulleung Basin was formed by the crustal extension of the southwestern Japan Arc where crustal structure is typically continental. Instead, the thickness of the crust and its velocity structure suggest that the Ulleung Basin was formed by seafloor spreading in a region of hotter than normal mantle surrounding a distant mantle plume, not directly above the core of the plume. It seems that the mantle plume was located in northeast China. This suggestion is consistent with geochemical data that indicate the influence of a mantle plume on the production of volcanic rocks in and around the Ulleung Basin. Thus we propose that the opening models of the southwestern East Sea should incorporate seafloor spreading and the influence of a mantle plume rather than the extension of the crust of the Japan Arc.     

3-D Shear Wave Velocity Structure of the Crust and Upper Mantle in South China Sea and its Surrounding Regions by Surface Wave Dispersion Analysis

In this study, we construct a 3-D shear wave velocity structure of the crust and upper mantle in South China Sea and its surrounding regions by surface wave dispersion analysis. We use the multiple filter technique to calculate the group velocity dispersion curves of fundamental mode Rayleigh and Love waves with periods from 14 s to 120 s for earthquakes occurred around the Southeast Asia. We divide the study region (80° E–140° E, 16° S–32° N) into 3° × 3° blocks and use the constrained block inversion method to get the regionalized dispersion curve for each block. At some chosen periods, we put together laterally the regionalized group velocities from different blocks at the same period to get group velocity image maps. These maps show that there is significant heterogeneity in the group velocity of the study region. The dispersion curve of each block was then processed by surface wave inversion method to obtain the shear wave velocity structure. Finally, we put the shear wave velocity structures of all the blocks together to obtain the three-dimensional shear wave velocity structure of crust and upper mantle. The three-dimensional shear wave velocity structure shows that the shear wave velocity distribution in the crust and upper mantle of the South China Sea and its surrounding regions displays significant heterogeneity. There are significant differences among the crustal thickness, the lithospheric thickness and the shear wave velocity of the lid in upper mantle of different structure units. This study shows that the South China Sea Basin, southeast Sulu Sea Basin and Celebes Sea Basin have thinner crust. The thickness of crust in South China Sea Basin is 5–10 km; in Indochina is 25–40 km; in Peninsular Malaysia is 30–35 km; in Borneo is 30–35 km; in Palawan is 35 km; in the Philippine Islands is 30–35 km, in Sunda Shelf is 30–35 km, in Southeast China is 30–40 km, in West Philippine Basin is 5–10 km. The South China Sea Basin has a lithosphere with thickness of about 45–50 km, and the shear wave velocity of its lid is about 4.3–4.7 km/s; Indochina has a lithosphere with thickness of about 55–70 km, and the shear wave velocity of its lid is about 4.3–4.5 km/s; Borneo has a lithosphere with thickness of about 55–60 km, and the shear wave velocity of its lid is about 4.1–4.3 km/s; the Philippine Islands has a lithosphere with thickness of about 55–60 km, and the shear wave velocity of its lid is about 4.2–4.3 km/s, West Philippine Basin has a lithosphere with thickness of about 50–55 km, and the shear wave velocity of its lid is about 4.7–4.8 km/s, Sunda Self has a lithosphere with thickness of about 55–65 km, and the shear wave velocity of its lid is about 4.3 km/s. The Red-River Fault Zone probably penetrates to a depth of at least 200 km and is plausibly the boundary between the South China Block and the Indosinia Block.     

An integrated geophysical study of Vestbakken Volcanic Province, western Barents Sea continental margin, and adjacent oceanic crust

This paper describes results from a geophysical study in the Vestbakken Volcanic Province, located on the central parts of the western Barents Sea continental margin, and adjacent oceanic crust in the Norwegian-Greenland Sea. The results are derived mainly from interpretation and modeling of multichannel seismic, ocean bottom seismometer and land station data along a regional seismic profile. The resulting model shows oceanic crust in the western parts of the profile. This crust is buried by a thick Cenozoic sedimentary package. Low velocities in the bottom of this package indicate overpressure. The igneous oceanic crust shows an average thickness of 7.2 km with the thinnest crust (5–6 km) in the southwest and the thickest crust (8–9 km) close to the continent-ocean boundary (COB). The thick oceanic crust is probably related to high mantle temperatures formed by brittle weakening and shear heating along a shear system prior to continental breakup. The COB is interpreted in the central parts of the profile where the velocity structure and Bouguer anomalies change significantly. East of the COB Moho depths increase while the vertical velocity gradient decreases. Below the assumed center for Early Eocene volcanic activity the model shows increased velocities in the crust. These increased crustal velocities are interpreted to represent Early Eocene mafic feeder dykes. East of the zone of volcanoes velocities in the crust decrease and sedimentary velocities are observed at depths of more than 10 km. The amount of crustal intrusions is much lower in this area than farther west. East of the Kn?legga Fault crystalline basement velocities are brought close to the seabed. This fault marks the eastern limit of thick Cenozoic and Mesozoic packages on central parts of the western Barents Sea continental margin.     

Distribution and abundance of the Weddell seal in the western Ross Sea,Antarctica

The distribution and abundance of the Weddell seal (Leptonychotes weddelli Lesson) in the fast ice and pack ice of the western Ross Sea, Antarctica, were investigated during 1967 and 1968 from icebreakers and accompanying helicopters. It was estimated that there were about 50,000 Weddell seals in the western Ross Sea between Cape Adare and McMurdo Sound. Weddell seals appear to breed mainly in the fast ice along the Victoria Land coast and less frequently in some nearby areas of pack ice. Fast ice is preferred to pack ice. Most Weddell seals in the pack ice were adults. General observations on the distribution of crabeater, leopard, and Ross seals are included.     

Evidence for gas hydrate occurrences in the Canadian Arctic Beaufort Sea within permafrost-associated shelf and deep-water marine environments

The presence of a wedge of offshore permafrost on the shelf of the Canadian Beaufort Sea has been previously recognized and the consequence of a prolonged occurrence of such permafrost is the possibility of an underlying gas hydrate regime. We present the first evidence for wide-spread occurrences of gas hydrates across the shelf in water depths of 60–100 m using 3D and 2D multichannel seismic (MCS) data. A reflection with a polarity opposite to the seafloor was identified ∼1000 m below the seafloor that mimics some of the bottom-simulating reflections (BSRs) in marine gas hydrate regimes. However, the reflection is not truly bottom-simulating, as its depth is controlled by offshore permafrost. The depth of the reflection decreases with increasing water depth, as predicted from thermal modeling of the late Wisconsin transgression. The reflection crosscuts strata and defines a zone of enhanced reflectivity beneath it, which originates from free gas accumulated at the phase boundary over time as permafrost and associated gas hydrate stability zones thin in response to the transgression. The wide-spread gas hydrate occurrence beneath permafrost has implications on the region including drilling hazards associated with the presence of free gas, possible overpressure, lateral migration of fluids and expulsion at the seafloor. In contrast to the permafrost-associated gas hydrates, a deep-water marine BSR was also identified on MCS profiles. The MCS data show a polarity-reversed seismic reflection associated with a low-velocity zone beneath it. The seismic data coverage in the southern Beaufort Sea shows that the deep-water marine BSR is not uniformly present across the entire region. The regional discrepancy of the BSR occurrence between the US Alaska portion and the Mackenzie Delta region may be a result of high sedimentation rates expected for the central Mackenzie delta and high abundance of mass-transport deposits that prohibit gas to accumulate within and beneath the gas hydrate stability zone.     

基于OBS和MCS数据的水合物地层速度特征

天然气水合物是一种新型的清洁能源, 南海北部神狐海域的地质条件有利于水合物的形成和储藏。传统的多道地震(MCS)数据难以得到精确的速度信息, 并且只能从时间域上判断地质体纵向分布。海底地震仪(OBS)是一种常用的主动源地震仪器, 可以接收到更清晰的气枪信号。相比于MCS, OBS剖面上的折射震相可以揭示较深部的地层速度信息。文章结合MCS和OBS的优势, 识别水平叠加剖面上的反射层位, 并得到初始模型; 将OBS剖面和水平叠加剖面拼合, 从而判断OBS剖面上反射震相所对应层位; 拾取OBS台站上的反射和折射震相, 使用RayInvr软件正演模拟得到水合物存在区域的二维速度模型, 解决了MCS中较为困难的时深转换问题。最终模型显示了水合物、游离气区域的埋深、厚度和速度, 以及似海底反射(BSR)下方更深部界面的深度和速度特征。     

Long-term bottom water warming in the north Ross Sea

We measured potential temperature, salinity, and dissolved oxygen profiles from the surface to the bottom at two locations in the north Ross Sea (65.2°S, 174.2°E and 67.2°S, 172.7°W) in December 2004. Comparison of our data with previous results from the same region reveals an increase in potential temperature and decreases in salinity and dissolved oxygen concentration in the bottom layer (deeper than 3000 m) over the past four decades. The changes were significantly different from the analytical precisions. Detailed investigation of the temperature, salinity, dissolved oxygen and σ ₃ value distributions and the bottom water flow in the north Ross Sea suggests a long-term change in water mass mixing balance. That is to say, it is speculated that the influence of cool, saline, high-oxygen bottom water (high-salinity Ross Sea Bottom Water) formed in the southwestern Ross Sea has possibly been decreased, while the influences of relatively warmer and fresher bottom water (low-salinity Ross Sea Bottom Water) and the Adélie Land Bottom Water coming from the Australia-Antarctic Basin have increased. The possible impact of global warming on ocean circulation needs much more investigation.     

Crustal analysis of the Ulleung Basin in the East Sea (Japan Sea) from enhanced gravity mapping

To facilitate geological analyses of the Ulleung Basin in the East Sea (Japan Sea) between Korea and Japan, shipborne and satellite altimetry-derived gravity data are combined to derive a regionally coherent anomaly field. The 2-min gridded satellite altimetry-based gravity predicted by Sandwell and Smith [Sandwell DT, Smith WHF (1997) J Geophys Res 102(B5):10,039–10,054] are used for making cross-over adjustments that reduce the errors between track segments and at the cross-over points of shipborne gravity profiles. Relative to the regionally more homogeneous satellite gravity anomalies, the longer wavelength components of the shipborne anomalies are significantly improved with minimal distortion of their shorter wavelength components. The resulting free-air gravity anomaly map yields a more coherent integration of short and long wavelength anomalies compared to that obtained from either the shipborne or satellite data sets separately. The derived free-air anomalies range over about 140 mGals or more in amplitude and regionally correspond with bathymetric undulations in the Ulleung Basin. The gravity lows and highs along the basin’s margin indicate the transition from continental to oceanic crust. However, in the northeastern and central Ulleung Basin, the negative regional correlation between the central gravity high and bathymetric low suggests the presence of shallow denser mantle beneath thinned oceanic crust. A series of gravity highs mark seamounts or volcanic terranes from the Korean Plateau to Oki Island. Gravity modeling suggests underplating by mafic igneous rocks of the northwestern margin of the Ulleung Basin and the transition between continental and oceanic crust. The crust of the central Ulleung Basin is about a 14–15 km thick with a 4–5 km thick sediment cover. It may also include a relatively weakly developed buried fossil spreading ridge with approximately 2 km of relief.     

Morphology,sedimentary infill and depositional environments of the Early Quaternary North Sea Basin (56°–62°N)

The North Sea Basin has been subsiding during the Quaternary and contains hundreds of metres of fill. Seismic surveys (170 000 km²) provide new evidence on Early Quaternary sedimentation, from about 2.75 Ma to around the Brunhes-Matuyama boundary (0.78 Ma). We present an informal seismic stratigraphy for the Early Quaternary of the North Sea, and calculate sediment volumes for major units. Early Quaternary sediment thickness is > 1000 m in the northern basin and >700 m in the central basin (total about 40 000 km³). Northern North Sea basin-fill comprises several clinoform units, prograding westward over 60 000 km². Architecture of the central basin also comprises clinoforms, building from the southeast. To the west, an acoustically layered and mounded unit (Unit Z) was deposited. Remaining accommodation space was filled with fine-grained sediments of two Central Basin units. Above these units, an Upper Regional Unconformity-equivalent (URU) records a conformable surface with flat-lying units that indicate stronger direct glacial influence than on the sediments below. On the North Sea Plateau north of 59°N, the Upper Regional Unconformity (URU) is defined by a shift from westward to eastward dipping seismic reflectors, recording a major change in sedimentation, with the Shetland Platform becoming a significant source. A model of Early Quaternary sediment delivery to the North Sea shows sources from the Scandinavian ice sheet and major European rivers. Clinoforms prograding west in the northern North Sea Basin, representing glacigenic debris flows, indicate an ice sheet on the western Scandinavian margin. In the central basin, sediments are generally fine-grained, suggesting a distal fluvial or glacifluvial origin from European rivers. Ploughmarks also demonstrate that icebergs, derived from an ice sheet to the north, drifted into the central North Sea Basin. By contrast, sediments and glacial landforms above the URU provide evidence for the later presence of a grounded ice sheet.     

Microbial respiration in the aphotic zone of the Ross Sea (Antarctica)

In January–February 2001, we measured microbial biomass as ATP and community respiration as ETS activity of organisms < 200 μm in the aphotic zone of the Ross Sea. Microbial respiration amounted to 2.14 mmol C m^− 2 day^− 1 in the depth range 200–1000 m. Our daily estimates of carbon export are close to the daily percentage of net community production (NCP), removed as sinking biogenic particles from the upper 100 m in the entire Ross Sea, but lower than those of other oceanic systems. Comparing remineralization determined in this study with that obtained by sediment traps in the Ross Sea, it appeared that about 63% of organic carbon remineralized by respiration derived from POC pool. Such evidence highlighted POC source as the main organic fuel of the biological pump in the Ross Sea.     

The Crustal Structure Character of East China Sea

This paper presents actuality of investigation and study of the crustal structure characters of East China Sea at home and abroad. Based on lots of investigation and study achievements and the difference of the crustal velocity structure from west to east, the East China Sea is divided into three parts - East China Sea shelf zone, Okinawa Trough zone and Ryukyu arc-trench zone. The East China Sea shelf zone mostly has three velocity layers, i.e., the sediment blanket layer （the velocity is 5.8-5.9 km/s）, the basement layer （the velocity is 6.0-6.3 km/s）, and the lower crustal layer （the velocity is 6.8-7.6 km/s）. So the East China Sea shelf zone belongs to the typical continental crust. The Okinawa Trough zone is located at the transitional belt between the continental crust and the oceanic crust. It still has the structural characters of the continental crust, and no formation of the oceanic crust, but the crust of the central trough has become to thinning down. The Ryukyu arc-trench zone belongs to the transitional type crust as a whole, but the ocean side of the trench already belongs to the oceanic crust. And the northwest Philippine Basin to the east of the Ryukyu Trench absolutely belongs to the typical oceanic crust.     

Deep crustal structure of the conjugate margins of the SW South China Sea from wide-angle refraction seismic data

The South China Sea is the largest marginal basin of SE Asia, yet its mechanism of formation is still debated. A 1000-km long wide-angle refraction seismic profile was recently acquired along the conjugate margins of the SW sub-basin of the South China Sea, over the longest extended continental crust. A joint reflection and refraction seismic travel time inversion is performed to derive a 2-D velocity model of the crustal structure and upper mantle. Based on this new tomographic model, northern and southern margins are genetically linked since they share common structural characteristics. Most of the continental crust deforms in a brittle manner. Two scales of deformation are imaged and correlate well with seismic reflection observations. Small-scale normal faults (grabens, horsts and rotated faults blocks) are often associated with a tilt of the velocity isocontours affecting the upper crust. The mid-crust shows high lateral velocity variation defining low velocity bodies bounded by large-scale normal faults recognized in seismic reflection profiles. Major sedimentary basins are located above low velocity bodies interpreted as hanging-wall blocks. Along the northern margin, spacing between these velocity bodies decreases from 90 to 45 km as the total crust thins toward the Continent–Ocean Transition. The Continent–Ocean Transitions are narrow and slightly asymmetric – 60 km on the northern side and no more than 30 km on the southern side – indicating little space for significant hyper-stretched crust. Although we have no direct indication for mantle exhumation, shallow high velocities are observed at the Continent–Ocean Transition. The Moho interface remains rather flat over the extended domain, and remains undisturbed by the large-scale normal faults. The main décollement is thus within the ductile lower crust.     

Basin development subsequent to ridge-trench collision: the Jane Basin,Antarctica

The Jane Arc and Basin system is located at the eastern offshore prolongation of the Antarctic Peninsula, along the southern margin of the South Orkney Microcontinent. Three magnetic anomaly profiles orthogonal to the main tectonic and bathymetric trends were recorded during the SCAN97 cruise by the Spanish R/V Hespérides. In our profiles, chron C6n (19.5 Ma) was identified as the youngest oceanic crust of the Northern Weddell Sea, whose northern spreading branch was totally subducted. The profiles from the Jane Basin allow us to date, for the first time, the age of the oceanic crust using linear sea floor magnetic anomalies. The spreading in the Jane Basin began around the age of the oldest magnetic anomaly at 17.6 Ma (chron C5Dn), and ended about 14.4 Ma (chron C5ADn). The distribution of the magnetic anomalies indicate that the mechanism responsible for the development of Jane Basin was the subduction of the Weddell Sea spreading centre below the SE margin of the South Orkney Microcontinent, suggesting a novel mechanism for an extreme case of backarc development.