Comparison of Static,Kinematic and Dynamic Geodetic Deformation Models for Kutlugün Landslide in Northeastern Turkey

Being the cause of the loss of life and damaging property, landslide is an important natural hazard. Therefore, landslides have to be monitored and preventive measures taken accordingly. In Geodesy, landslides can be determined with static, kinematic and dynamic geodetic models. The aim of this study is to develop a dynamic geodetic model for landslides and compare it with static and kinematic geodetic models. A study area was selected in the Northeastern Black Sea Region of Turkey where landslides are the most effective natural hazard. Movements were determined with static, kinematic and dynamic geodetic models using geodetic, geologic and geophysical measurements made in the study area. Groundwater levels changes were regarded as causative forces in the formulation of the dynamic model. The dynamic model delivered more detailed information (direction, values, velocity, acceleration of movements) about landslide movements. It is possible to formulate more realistic strategies about prevention of landslides by using this information. As a result, it can be suggested that dynamic geodetic models are more useful in landslide studies.     

Investigation of Hydrous Pyrolysis on Type-II Kerogen-bearing Source Rocks from Iran and its Application in Geochemical and Kinetic Analyses of Hydrocarbon Products

Hydrous pyrolysis (HP) practiced on type-II kerogen-bearing oil shale samples from the Sargelu Formation in the Ghali-Kuh Area, western Iran, using a specially designed apparatus was performed at different temperatures (250–350°C), with hydrocarbon generation evaluated at each temperature. For comparison, the samples subjected to Rock-Eval pyrolysis before proceeding to HP resulted in Tmax = 418°C, HI = 102, and TOC = 4.33%, indicating immaturity and hence remarkable hydrocarbon (especially oil) generation potential, making them appropriate for HP. Moreover, the samples were deposited in a low-energy reductive marine environment, with maximum oil and gas generation (739 mg and 348 mg out of 50 g of rock sample, respectively) observed at 330°C and 350°C, respectively. The oil generated at 330°C was subjected to gas chromatography (GC) and isotopic analyses to assess hydrocarbon quality and composition. The hydrocarbon generation data was devised to estimate kinetic indices of the Arrhenius equation and to investigate the gas–oil ratio (GOR) and overall conversion yield. Based on the producible hydrocarbon quantity and quality, the findings contribute to the economic assessment of oil shales across the study area. The developed kinetic model indicates the history of hydrocarbon generation and organic matter (OM) maturity.     

Pyritized mudstone and associated facies in the Permian–Triassic boundary of the Çürük Dağ section,Southern Turkey

This paper is the first study of pyritized mudstones (PM) in the Permian–Triassic (P–T) boundary section of the Çürük Da? (Taurus, Antalya Nappes, Turkey). The mudstones were generally formed as lensoidal-shaped layers or infill materials within nodular platform limestones (hardground). Normal marine fauna is diminished in the pyritized limestones, whereas tube-like microorganisms are apparently increased with the association of pyrite crystals consisting of both framboidal and cubic crystals. The total rock volumes are up to 50–60% clay minerals and are mainly made up of in situ kaolinite and subordinate mixed layer clays (illite–vermiculite). Kaolinite preferentially developed on feldspar crystals, sometimes covering ostracoda bivalves together with gypsum micronodules composed of fan-shaped gypsum crystals. The origin of the kaolinite is, in situ, directly related to feldspar dissolution via heterotrophic bacteria. Thus, kaolinite is found along with bacterial structures. Other mineralogical compositions include established quartz (mostly β-quartz), gypsum crystals (100–200 μm) glauconite and magnetite. Magnetite grains comprise a minor amount (1–2%) and show some bacterial-induced crystal orientations. Glauconite is formed as an accessory mineral that occurs as infill material in biogenic grains. On the other hand, some microspheres represented by a silica-dominated composition are only observed in scanning electron microscopes (SEM) studies under high magnification. Isotope values (d34S) obtained from the pyritized mudstones show an isotopic heterogeneity that suggests that the pyritized mudstone consists of at least two components, with different sulphur-concentrations and d34S values.     

An Investigation of Deep Electrical Structure of Qiangtang Basin,Xizang(Tibet),China

In order to study the deep geoelectrical structure and the regional geological structure and detect potential oil and gas areas in Qiangtang basin in northern Xizang (Tibet), 222 MT soundings were conducted along three N - S MT profiles across the basin .The MT results indicate that the south and north parts of the Qiangtang basin have a good contrast in the deep electrical structure . In the south Qiangtang , there are generally two high conductivity layers in the crust . The first is at a depth of about 10-25 km and possesses a resistivity of about 10-80 Ωm . The second, the high conductivity layer in the lower crust, is at a depth of about 40-70 km with 3- 50 Ωm . In the north Qiangtang , there is generally one high conductivity layer . It is at a depth of about 10-30 km and the resistivity is about 1-60 Ωm . The thickness of the second high conductivity layer in both the south Qiangtang and the Bangong-Nujiang suture is much greater than that of the first . The thickness of the lithosphere is abou     

Integrated Biostratigraphy, Depositional Setting and Geochemical Analyses for Petroleum Potential Evaluation of the Lower Cretaceous (Barremian – Albian) Strata of the Koppeh-Dagh Basin, Northeastern Iran

The lower Cretaceous rock units of the Koppeh-Dagh Basin of northeastern Iran were investigated here in terms of biostratigraphy, depositional setting and geochemical analyses to find out if they, alike other parts of the world, are rich in petroleum. For this purpose, a stratigraphic framework is established using calcareous nannofossil and palynological elements. A nannoplankton zonation based on which subzones of the zones CC7 – CC8 of Sissingh(1977) and their equivalent NC6 – NC8 of Roth(1978) was established indicating a Late Barremian–Albian age. Palynological assemblages led us to establish the local palynozone of Odontochitina operculata. A dominantly marginal basin to a transitional zone between shelf and basin under a dysoxic–anoxic condition with low to moderate sedimentation rates coincided with a gradual sea level rise was introduced as the environment of deposition for the strata via interpretation of the palynological parameters and quantitative palynology. The obtained data from Rock-Eval pyrolysis in compilation with palynofacies analysis reveals that the studied succession contains mainly gas-prone type III kerogen. The Spore Coloration Index(SCI) alongside with the Rock-Eval pyrolysis results(low values of HI and TOC) proves that these rock units locally produced natural gas during the time under consideration.     

Landslide susceptibility assessment by Dempster–Shafer and Index of Entropy models,Sarkhoun basin,Southwestern Iran

Landslides are natural disasters often activated by interaction of different controlling environmental factors, especially in mountainous terrains. In this research, the landslide susceptibility map was developed for the Sarkhoun catchment using Index of Entropy (IoE) and Dempster–Shafer (DS) models. For this purpose, 344 landslides were mapped in GIS environment. 241 (70%) out of the landslides were selected for the modeling and the remaining (30%) were employed for validation of the models. Afterward, 10 landslide conditioning factor layers were prepared including land use, distance to drainage, slope gradient, altitude, lithology, distance to roads, distance to faults, slope aspect, Topography Wetness Index, and Stream Power Index. The relationship between the landslide conditioning factors and landslide inventory maps was determined using the IoE and DS models. In order to verify the models, the results were compared with validation landslide data not employed in training process of the models. Accordingly, Receiver Operating Characteristic (ROC) curves were applied, and Area Under the Curve (AUC) was calculated for the obtained susceptibility maps using the success (training data) and prediction (validation data) rate curves. The land use was found to be the most important factor in the study area. The AUC are 0.82, and 0.81 for success rates of the IoE, and DS models, respectively, while the prediction rates are 0.76 and 0.75. Therefore, the results of the IoE model are more accurate than the DS model. Furthermore, a satisfactory agreement is observed between the generated susceptibility maps by the models and true location of the landslides.     

Landslide hazard zoning along Himalayan Kaghan Valley of Pakistan��by integration of GPS, GIS, and remote sensing technology

This paper presents a methodology for developing a landslide hazard zonation map by integration of global positioning system (GPS), geographic information system (GIS), and remote sensing (RS) for Western Himalayan Kaghan Valley of Pakistan. The landslides in the study area have been located and mapped by using GPS. Eleven causative factors such as landuse, elevation, geology, rainfall intensity, slope inclination, soil, slope aspect, distances from main road, distances from secondary roads, and distances from main river and those from trunk streams were analyzed for occurrence of landslides. These factors were used with a modified form of pixel-based information value model to obtain landslide hazard zones. The matrix analysis was performed in remote sensing to produce a landslide hazard zonation map. The causative factors with the highest effect of landslide occurrence were landuse, rainfall intensity, distances from main road, distances from secondary roads, and distances from main river and those from trunk streams. In conclusion, we found that landslide occurrence was only in moderate, high, or very high hazard zones, and no landslides were in low or very low hazard zones showing 100% accuracy of our results. The landslide hazard zonation map showed that the current main road of the valley was in the zones of high or very high hazard. Two new safe road routes were suggested by using the GIS technology.     

Investigation of the quality and physical-geochemical characteristics of the drinking water in Gümüşhane (Turkey) city central

The physical (turbidity, color, smell, taste, pH, and conductivity) and geochemical properties (Ca, Mg, Na, Fe, Mn, Al, K, Cl^?, HCO₃ ^?, SO₄ ^2?, Fe, Cu, Co, Ni, Zn, Cd, Pb, and Cr) of the drinking water in Gümü?hane city center were determined. This city center constitutes the study area. The pH levels of the water samples ranged from 6.3 to 8.2, and their conductivities ranged between 240 and 900 μS. These findings were concordant with the drinking water standards of the Turkey Standard Institute and the World Health Organization. The hardness of the water samples in the study area was between 18.1 and 115.1 °Fr. These samples were classified as extremely hard, hard, and quite hard. In addition, an assessment using the criteria for Inland Surface Water Classification indicated that considering certain parameters (pH levels, amount of Na, SO₄ ^2?, Fe, Mn, Al, Co, Ni, Cu, and Cr), the samples belonged to class I (high quality) water. When Cl^? amount and conductivity were considered, the samples belonged to the first and second classes (less polluted) of water. The water in the study area was generally classified as carbonated and sulfated (Ca + Mg > Na + K) water classes. This water contained more weak acids than strong acids (HCO₃ ^? + CO₃ ^2? > Cl^? + SO₄ ^2?). The pH levels (6.3–8.2) of the water in the study area were unrelated to the varying concentrations of metals in the water. Elements such as Fe, Ni, Cd, Pb, Zn, and Cu increase in the water through the water–rock interaction in the area in which water rises or through the mixture of water with either mine or industrial wastes. In addition, several water samples belonged to an acceptable water class for drinking and usage.     

Hydrogeochemical study of the thermal and mineralized waters of the Banaz (Hamamboğazi) area,western Anatolia,Turkey

The Hamamboğazi spa in western Turkey was built around natural hot springs with discharge temperatures in the range of 30–54°C; the waters have near neutral pH values of 6.50–7.10 and a TDS content between 2,694 and 2,982 mg/l. Thermal water with a temperature of 47.5–73°C has been produced at 325 l/s from five wells since 1994, causing some springs to go dry. A management plan is required in the study area to maximize the benefits of this resource, for which currently proposed direct uses include heating in the district and greenhouses, as well as balneology in new spas in the area. The best use for the water from each spring or well will depend on its temperature, chemistry and location. The thermal waters are mixed Na–Mg–HCO₃–SO₄ fluids that contain a significant amount of CO₂ gas. The chemical geothermometers applied to the Hamamboğazi thermal waters yield a maximum reservoir temperature of 130°C. Isotope results (¹⁸O, ²H, ³H) indicate that the thermal waters have a meteoric origin: rainwater percolates downward along fractures and faults, is heated at depth, and then rises to the surface along fractures and faults that act as a hydrothermal conduit. The basement around the Banaz Hamamboğazi resort is comprised of Paleozoic metamorphic schist and marbles exposed 8 km south and 15 km north of Banaz. Mesozoic marble, limestone and ophiolitic complex are observed a few km west and in the northern part of Banaz. These units were cut at a depth of 350–480 m in boreholes drilled in the area. Overlying lacustrine deposits are composed of fine clastic units that alternate with gypsum, tuff and tuffites of 200–350 m thickness. The marble and limestones form the thermal water aquifer, while lacustrine deposits form the impermeable cap.     

Cambrian and Silurian Formations of Malung and Chütsing Districts,Yunnan

The region of Malung and Chutsing was first visited by V. K.Ting as far back as 1914. Besides reconnaissance mapping a considerablenumber of fossils were collected. These were sent to C. D. Walcott ofthe Smithsonian Institution, who, together with Kirk, McEwan and     

Assessment of trace metal contents in water and bottom sediments from Eğirdir Lake,Turkey

The concentration of metals (Pb, As, Co, Cu, Ni, Zn, Fe and Mn) was investigated in water and sediment samples of E?irdir Lake. The Lake is the second largest fresh water lake of Turkey and it is used as drinking water in the region. The anthropogenic pollutants are primary sources of trace metals which are negatively affected lake water quality. These negative effects were observed in both lake water and bottom sediments. According to obtained data, Pb, Cu, Ni, Fe and Zn have significant enrichment in sediments samples. In addition, the hydrodynamic model of the lake was determined as effectively for Pb, Co, Cu, Ni, Zn, Fe and Mn accumulations. Also, the effect of anthropogenic pollutants was found to be more dominant than geogenic effect in metal accumulation of the lake bottom sediments. Therefore, anthropogenic pollutants within the lake basin should be consistently controlled for the sustainable usage of the lake.     

Relationship between Akhüyük fissure ridge travertines and active tectonics: their neotecteonic significance (Ereğli-Konya,Central Anatolia)

Arabian Journal of Geosciences - The Akhüyük travertine mass crops out approximately 10 km to the north of Ereğli (Konya, Central Anatolia). Its morphology and relationship...     

Evaluating the anthropogenic and geologic impacts on water quality of the Eğirdir Lake, Turkey

E?irdir Lake is the second largest fresh water lake with 482 km² surface area of Turkey. The lake is an indispensable water source for our country and region because of available water capacity and usage aims such as drinking-irrigation water, tourism, and fishing. However, especially contaminants located in the E?irdir Lake catchment affect the lake water quality negatively in times. Therefore, determination of the water quality of the lake has quite importance for region human health and sustainable usage of the lake. The major factors that control the quality of the E?irdir Lake water are agricultural activities in the basin, water–rock interaction, and domestic and industrial wastes. This study investigates the anthropogenic and geologic impact originated from pollution sources and water–rock interaction in the lake watershed basin to the E?irdir Lake water quality. For this purpose, geological, hydrogeological, and hydrological properties of the lake basin with point and nonpoint pollution sources were investigated. To determine the water quality of the lake, 48 water samples were collected especially from locations representing effects of pollutants in May and October 2009. The analysis results were compared with maximum permissible limit values recommended by World Health Organization and Turkish drinking water standards. The contents of all chemical and physical parameters are higher in dry periods than wet period, and water pollution was observed at discharge points of the streams into the lake. Also, pH, turbidity, potassium, chemical oxygen demand, ammonium, aluminum, iron, and lead concentrations were found to be above drinking water standards.     

Tertiary Volcanic and Tectonic Evolution of the Ayas-Güdül-Celtikci Region,Turkey

Volcanic activity in the Ayas-Güdül-Celtikci region began by Oligocene (?)-early Miocene time and persisted until the end of early Pliocene time. It commenced with andesitic breccias and lavas at the base of the series and evolved through the deposition of ignimbritic and laharic volcanic material toward intermediate levels of the succession. Caldera formation followed this period of volcanic activity. Ephemeral lakes covering the region caused the subaqueous extrusion of the latest lavas during this period of activity. Afterward, limnic and fluvial sedimentation Occurred in the region during a period of volcanic quiescence. This mid-late Miocene deposition was followed by new basaltic activity. The volcanism was controlled by conjugate fault sets, N45W and N15E, representing pure-shear stress in a N20W direction, from the late Oligocene to the end of the early Pliocene. Normal dip-slip faults having a N55E trend were created by local N25W tension, presumably because of the North Anatolian fault, after early Pliocene time.     

Investigation of discharge and groundwater contamination characteristics around the Karasu Spring, Muş Area, Turkey

The study area is 35 km east of the city center of Mu, Turkey. The rock units in the area include Paleozoic Bitlis Metamorphites, Cenozoic flysch and Solhan Volcanities and Pliocene formations. A long-term discharge change was monitored in the Karasu spring. The amount of water discharged by the spring during June 3 and October 11, 2002 was 7.18×10⁶ m³ while its storage capacity during May 26 and November 11, 2002 was 4.42×10⁶ m³.NH₄ – N, NO₂ – N, NO₃ – N, total PO₄ – P, SO₄ and total organic carbon (TOC) contamination were determined in the recharge area of the spring and other well and spring waters in the vicinity. NH₄ – N, NO₂ – N, NO₃ – N, total PO₄ – P, SO₄ and total organic carbon contamination around the Budak, ivbai, Gölbai, Sazlikbai and Altinova villages are well above the drinking water standards of the Turkish Standard Institute (TSE) and World Health Organization (WHO) (1984). Similarly, water samples of K₄, K₅ and K₆ branches of the Karasu spring and S₁, S₂, S₃ and S₄ points in the swamp area yielded concentrations much more than limit values.     

Hydrogeochemistry of thermal and mineralized waters in the Diyadin (Ağri) area,Eastern Turkey

The Diyadin Geothermal area, located in the eastern part of Anatolia (Turkey) where there has been recent volcanic activity, is favorable for the formation of geothermal systems. Indeed, the Diyadin geothermal system is located in an active geodynamic zone, where strike-slip faults and tensional cracks have developed due to N–S regional compression. The area is characterized by closely spaced thermal and mineralized springs, with temperatures in the range 30–64 °C, and flowrates 0.5–10 L/s. Thermal spring waters are mainly of Ca(Na)-HCO₃ and Ca(Mg)-SO₄ types, with high salinity, while cold groundwater is mostly of Ca(Na, Mg)-HCO₃ type, with lower salinity. High contents of some minor elements in thermal waters, such as F, B, Li, Rb, Sr and Cs probably derive from enhanced water–rock interaction.Thermal water samples collected from Diyadin are far from chemical equilibrium as the waters flow upward from reservoirs towards spring vents and possibly mix with cooler waters. The temperatures of the deep geothermal reservoirs are estimated to be between 92 and 156 °C in Diyadin field, based on quartz geothermometry, while slightly lower estimates are obtained using chalcedony geothermometers. The isotopic composition of thermal water (δ¹⁸O, δ²H, δ³H) indicates their deep-circulating meteoric origin. The waters are likely to have originated from the percolation of rainwater along fractures and faults to the deep hot reservoir. Subsequent heating by conduction due to the presence of an intrusive cupola associated with the Tendurek volcano, is followed by the ascent of deep waters to the surface along faults and fractures that act as hydrothermal conduits.Modeling of the geothermal fluids indicates that the fluid is oversaturated with calcite, aragonite and dolomite, which matches travertine precipitation in the discharge area. Likewise, the fluid is oversaturated with respect to quartz, and chalcedony indicating the possibility of siliceous precipitation near the discharge areas. A conceptual hydro-geochemical model of the Diyadin thermal waters based on the isotope and chemical analytical results, has been constructed.     

Analyses of Sequence Stratigraphy and Environments across Permian—Triassic Boundary in Liaotian, Northwestern Jiangxi Province

Based on the study of lithology, sedimentology and paleontology at the Permian-Triassic boundary in Liaotian, Northwestern Jiangxi Province, the sequence stratigraphy and depositional environments across the boundary are reconstructed. The top part of the Upper Permian Changxing Formation is composed of very thick-bedded ligh-colored dolomitic limestone formed in high deposition rate on carbonate ramp,which indacates a transgression systems tract (TST). The Lower Triassic Qinglong Formation shows continuous deposition with the underlying Upper Permian. The lower member of Qinglong Formation consists of calcareous shale, shelly limestome and dolomitic limestone with abundant bivalves (Claraia sp.) and trace fossills (Chondrites). The calcareous shale at the bottom of Lower Triassic indicates a calm deep water environment to form the condensed section (CS). The shelly limestome and dolomitic limeston with shell fossils, intraclast, algal ooide show clean but turbulent environment of carbonate ramp, which produce the deposition of highstand systems tract (TST).