Intensity map of Mw 6.9 2011 Sikkim–Nepal border earthquake and its relationships with PGA: distance and magnitude

We compiled available information of damages and other effects caused by the September 18, 2011, Sikkim–Nepal border earthquake from the print and electronic media, and interpreted them to obtain Modified Mercalli Intensity (MMI) at over 142 locations. These values are used to prepare the intensity map of the Sikkim earthquake. The map reveals several interesting features. Within the meizoseismal area, the most heavily damaged villages are concentrated toward the eastern edge of the inferred fault, consistent with eastern directivity. The intensities are amplified significantly in areas located along rivers, within deltas or on coastal alluvium such as mud flats and salt pans. We have also derived empirical relation between MMI and ground motion parameters using least square regression technique and compared it with the available relationships available for other regions of the world. Further, seismic intensity information available for historical earthquakes which have occurred in NE Himalayas along with present intensity has been utilized for developing attenuation relationship for NE India using two-step regression analyses. The derived attenuation relation is useful for assessing damage of a potential future earthquake (earthquake scenario-based planning purposes) for the northeast Himalaya region.

     

Tectonics and crustal structures related to Bhuj earthquake of January 26, 2001: based on gravity and magnetic surveys constrained from seismic and seismological studies

Gravity and magnetic data of the Kachchh basin and surrounding regions have delineated major E–W and NW–SE oriented lineaments and faults, which are even extending up to plate boundaries in the north Arabian Sea and western boundary of the Indian plate, respectively. The epicentral zone of Bhuj earthquake and its aftershocks is located over the junction of Rann of Kachchh and median uplifts viz. Kachchh mainland and Wagad uplifts, which are separated by thrust faults. Gravity data with constraints from the results of the seismic studies along a profile suggest that the basement is uplifted towards the north along thrust faults dipping 40–60° south. Similarly gravity and magnetic modeling along a profile across Wagad uplift suggest south dipping (50–60°) basement contacts separating rocks of high susceptibility and density towards the north. One of these contacts coincides with the fault plane of the Bhuj earthquake as inferred from seismological studies and its projection on the surface coincides with the E–W oriented north Wagad thrust fault. A circular gravity high in contact with the fault in northern part of the Wagad uplift along with high amplitude magnetic anomaly suggests plug type mafic intrusive in this region. Several such gravity anomalies are observed over the island belt in the Rann of Kachchh indicating their association with mafic intrusions. The contact of these intrusives with the country rock demarcates shallow crustal inhomogeneities, which provides excellent sites for the accumulation of regional stress. A regional gravity anomaly map based on the concept of isostasy presents two centers of gravity lows of −11 to −13 mGal (10⁻⁵ m/s²) representing mass deficiency in the epicentral region. Their best-fit model constrained from the receiver function analysis and seismic refraction studies suggest crustal root of 7–8 km (deep crustal inhomogeneity) under them for a standard density contrast of −400 kg/m³. It is, therefore, suggested that significant amount of stress get concentrated in this region due to (a) buoyant crustal root, (b) regional stress due to plate tectonic forces, and (c) mafic intrusives as stress concentrators and the same might be responsible for the frequent and large magnitude earthquakes in this region including the Bhuj earthquake of January 26, 2001.     

Triggered/migrated seismicity due to the 2001 M w7.7 Bhuj earthquake, Western India

Paper describes triggered seismicity to 200?km distance and for a decade due to the 2001 M _w7.7 Bhuj earthquake. The Kachchh region is seismically one of the most active intraplate regions of the World due to the occurrence of two large earthquakes 1819 (M _w7.8) and 2001 (M _w7.7). Though, it has high hazard but was known to have low seismicity in view of the occurrence of fewer smaller shocks. However, the status seems to have changed after 2001. Besides the strong aftershock activity for over a decade, seismicity has spread to nearby faults in Kachchh peninsula and at several places southward for 200?km distance in Saurashtra peninsula. Beyond the rupture zone of the 2001 Bhuj earthquake, more than 40 mainshocks of M _w?~?3?C5 have occurred at 20 different locations, which is unusual. The increased seismicity is inferred to be caused by stress perturbation due to the 2001 Bhuj earthquake by viscoelastic process. In Saurashtra, over and above the viscoelastic stress increase, the transient stress increase by water table rise in monsoons seems to be affecting the timing of mainshocks and associated sequences of earthquakes.     

Ultra-Low Frequency Geomagnetic Variations before Dholavira Earthquake M = 5.1 on the 20th of June 2012 in Kachchh Region,Gujarat, India

Geotectonics - On June 20, 2012, an M = 5.1 earthquake known as the Dholavira earthquake occurred in the epicentral region of the 2001 Bhuj earthquake (M = 7.6) in Kachchh region, Gujarat, India....     

Geoseismological investigation of the January 26, 2001 Bhuj earthquake in western peninsular India

Of the intraplate seismic events, the January 26, 2001 Bhuj earthquake (Mw 7.7) would be remembered as one of the deadliest, in which 13,805 human lives were lost, 0.177 million injured and a total of 1,205,198 houses were fully or partly damaged in 16 districts of Gujarat state with an estimated overall loss of Rs. 284, 23 million. The brunt of the calamity was borne by five districts, namely Kachchh, Ahmadabad, Rajkot, Jamnagar and Surendranagar, where 99?% of the total casualties and damage occurred. In the neighbouring parts of Sindhh Province of Pakistan, 40 human casualties were reported, and some buildings cracked in the Karachi city as well. In the Kachchh district of Gujarat state, the telecommunication links and power supply were totally disrupted, road and rail links partially impaired and water supply snapped at many places. The Bhuj airbase had to be closed for some time due to damage to the infrastructure. The macroseismic survey carried out by the Geological Survey of India in an area as large as 1.2 million?sq?km indicated an epicentral intensity as high as X on the MSK scale in an area of 780?sq?km in the central part of Kachchh rift basin. Apart from damages to civil structures, the January 26 earthquake induced conspicuous terrain deformation in the form of liquefaction features, structural ground deformation and low-order slope failures that were mainly prevalent within the higher intensity isoseists. Liquefaction occurred in an area of about 50,000?sq?km. The extensive plains of Rann of Kachchh, the marshy tracts of the Little Rann and the shallow groundwater table zones of Banni Land provided the most conducive geotechnical environments for the development of seismites. The liquefaction activity was profuse in seismic intensity zones X and IX, widespread in intensity VIII, subdued in intensity VII and stray in intensity VI. The common forms of liquefaction were sand blows/boils, ground fissures, craters, lateral spreading and slumping. Ground deformation of tectonic origin was witnessed in the epicentral tract. Such features, though much less subdued in comparison with the 1819 large earthquake (Mw 7.8) in region, occurred along the Kachchh Mainland fault (KMF) and along a transverse lineament, referred to as Manfara?CKharoi fault. The manifestations were in the form of fractures, displacement of strata, linear subsidence, upheaval, formation of micro-basins/micro-ridges, ripping off of rock surface, and at places violent forms of liquefaction. The localities where coseismic deformations were observed include Bodhormora, Sikra, Vondh, Chobari, Manfara and Kharoi. The 2001 event has demonstrated the role of local geology in influencing the ground motion characteristics and, therefore, the hazard estimation.     

Estimation of seismic hazard in Gujarat region, India

The seismic hazard in the Gujarat region has been evaluated. The scenario hazard maps showing the spatial distribution of various parameters like peak ground acceleration, characteristics site frequency and spectral acceleration for different periods have been presented. These parameters have been extracted from the simulated earthquake strong ground motions. The expected damage to buildings from future large earthquakes in Gujarat region has been estimated. It has been observed that the seismic hazard of Kachchh region is more in comparison with Saurashtra and mainland. All the cities of Kachchh can expect peak acceleration in excess of 500?cm/s² at surface in case of future large earthquakes from major faults in Kachchh region. The cities of Saurashtra can expect accelerations of less than 200?cm/s² at surface. The mainland Gujarat is having the lowest seismic hazard as compared with other two regions of Gujarat. The expected accelerations are less than 50?cm/s² at most of the places. The single- and double-story buildings in Kachchh region are at highest risk as they can expect large accelerations corresponding to natural periods of such small structures. Such structures are relatively safe in mainland region. The buildings of 3?C4 stories and tall structures that exist mostly in cities of Saurashtra and mainland can expect accelerations in excess of 100?cm/s² during a large earthquake in Kachchh region. It has been found that a total of 0.11 million buildings in Rajkot taluka of Saurashtra are vulnerable to total damage. In Kachchh region, 0.37 million buildings are vulnerable. Most vulnerable talukas are Bhuj, Anjar, Rapar, Bhachau, and Mandvi in Kachchh district and Rajkot, Junagadh, Jamnagar, Surendernagar and Porbandar in Saurashtra. In mainland region, buildings in Bharuch taluka are more vulnerable due to proximity to active Narmada-Son geo-fracture. The scenario hazard maps presented in this study for moderate as well as large earthquakes in the region may be used to augment the information available in the probabilistic seismic hazard maps of the region.     

Post-seismic deformation associated with the 2001 Bhuj earthquake

We report the results of GPS measurements of post-seismic deformation due to the 2001 Bhuj earthquake in the Kachchh region, western India. The estimated horizontal velocity vectors in ITRF05 are in the range of 48?C49?mm/year in N46?C50°E. The observed velocity at the Gandhinagar permanent site, a far off site from the earthquake source region and probably unaffected by the post-seismic deformation, is 49?±?1?mm/year in N47°E, which is consistent with the predicted motion of Indian plate at Gandhinagar. At other sites in the source region, transient post-seismic deformation is found to be low; it attenuated rapidly within 3?C4?years of the earthquake and is much low now. Our results support the idea that mantle rheology is weak in the region.     

3-D seismic structure of the Kachchh,Gujarat, and its implications for the earthquake hazard mitigation

Several pieces of studies on the January 26, 2001, Bhuj earthquake (Mw 7.6) revealed that the mainshock was triggered on the hidden unmapped fault in the western part of Indian stable continental region that caused a huge loss in the entire Kachchh rift basin of Gujarat, India. Occurrences of infrequent earthquakes of Mw 7.6 due to existence of hidden and unmapped faults on the surface have become one of the key issues for geoscientific research, which need to be addressed for evolving plausible earthquake hazard mitigation model. In this study, we have carried out a detailed autopsy of the 2001 Bhuj earthquake source zone by applying three-dimensional (3-D) local earthquake tomography (LET) method to a completely new data set consisting of 576 local earthquakes recorded between November 2006 and April 2009 by a seismic network consisting of 22 numbers of three-component broadband digital seismograph stations. In the present study, a total of 7560 arrival times of P-wave (3820) and S-wave (3740) recorded at least 4 seismograph stations were inverted to assimilate 3-D P-wave velocity (Vp), S-wave velocity (Vs), and Poisson’s ratio (σ) structures beneath the 2001 Bhuj earthquake source zone for reliable interpretation of the imaged anomalies and its bearing on earthquake hazard of the region. The source zone is located near the triple junction formed by juxtapositions of three Indian, Arabian, and Iranian tectonic plates that might have facilitated the process of brittle failure at a depth of 25 km beneath the KRB, Gujarat, which caused a gigantic loss to both property and persons of the region. There may be several hidden seismogenic faults around the epicentral zone of the 2001 Bhuj earthquake in the area, which are detectable using 3-D tomography to minimize earthquake hazard for a region. We infer that the use of detailed 3-D seismic tomography may offer potential information on hidden and unmapped faults beneath the plate interior to unravel the genesis of such big damaging earthquakes. This study may help in evolving a comprehensive earthquake risk mitigation model for regions of analogous geotectonic settings, elsewhere in the world.     

Evidence for a fluid flow triggered spatio-temporal migration of seismicity in the 2001 M<Subscript>w</Subscript> 7.7 Bhuj earthquake region,Gujarat, India,during 2001–2013

We studied the variations in spatial and temporal clustering of earthquake activity (during 2001–2013) in the Kachchh seismic zone, Gujarat, India, by precisely relocating 3478 events using a joint hypocentral determination (JHD) relocation technique, and high-quality arrival times of 21032 P- and 20870 S-waves. Temporal disposition of estimated station corrections of P- and S-waves suggests that the fluid flow in the causative fault zone of the 2001 Bhuj mainshock increased during 2001–2010, while it reduced during 2011–2013, due to the healing process associated with the perturbed Kachchh fault zone. We also estimated the isotropic seismic diffusivities from epicentral growth patterns, which are found to be much lower than those observed for reservoir-induced seismicity sites in the world. Finally, we analysed the spatial and temporal evolution of this earthquake sequence by solving the diffusion equation of pore-pressure relaxation caused by co- and post-seismic stress changes associated with earthquakes. The value of the isotropic diffusivity is estimated to be 100 m²/s for the Kachchh rift zone. This gives a higher permeability (after a lapse time of 14 years from the occurrence of the 2001 Bhuj mainshock) in comparison to those observed for other intraplate regions in the world. Our results suggest that the observed spatio-temporal migration of seismicity is consistent with the shallow (meteoric water circulation at 0–10 km depths) and deeper (metamorphic fluid and volatile CO₂ circulation at 10–40 km depths) fluid flows in the permeable and fractured causative fault zone of the 2001 Bhuj earthquake.     

Statistical parameters of Bhuj earthquake sequence of January 26th, 2001

An intraplate earthquake of magnitude (M _c) 6.9 (Anon 2001a) struck Bhuj and the adjoining region of Kachchh in Gujarat on January 26th, 2001 at about 0316 hrs (GMT) and was followed by a number of aftershocks. The epicentre of this earthquake was located at 23.4‡N and 70.28‡E close to the Kachchh mainland fault. The intensity observed around the epicenter was X on the MSK scale. A study of 531 aftershocks, in the magnitude range of 3.0–5.7, recorded at Vadodara Seismological Observatory till March 31st, 2001 has been carried out and various statistical parameters calculated. The total energy released during the study period is calculated to be 8.2 × 10¹⁴ joule. Sudden occurrence of the main shock without any foreshock in the same tectonic system is a unique feature of this sequence. Theb- value (0.86), value of M₀-M₁ (1.2), high M₁/M₀ (0.89) and high value of the decay constanth (0.91), all support the tectonic origin of the present study.     

Geomorphological characteristics identification from remote sensing along with surface temperature anomaly and SAR interferometry–related studies and their correlation with earthquake occurrences in Gujarat

Geological, geomorphological and tectonic element studies of the Kachchh region have been carried out and correlation between them with the seismic data has been attempted. Study and analysis of Bhuj region using various remote sensing techniques including surface temperature changes, InSAR studies and GPS have also been attempted to identify earthquake precursors on different scales and the areas susceptible to damage or disaster on different degrees. The Kachchh region is located in Mesozoic rift environment that was earlier characterized by tensional stresses, but present-day compressive stress regime suggests that this region is undergoing a stage of inversion tectonics. The present work aims at the application of remote sensing techniques in developing a long-term precursor in the form of landscape changes, before the occurrence of a major earthquake as a result of crustal stress accumulation. It is, therefore, necessary to find out with the help of other precursors whether or not the area is accumulating stress. A minute observation of all the acquired multi-temporal imageries could demarcate minute geomorphological changes in this region, for example, shifting of drainage patterns since the development of paleochannels, slow upliftment/depressions, etc. Moreover, a distinct change in temperature (~5 to 6 °C) could be observed on April 6, 2006, and again on April 10, 2006, in the Kachchh region before the occurrence of tremor, particularly along the Kachchh Mainland Fault, indicating that such tremor generates sufficient stress before the earthquake particularly along the fault line. b values study over the region during last 50 years has also clearly indicated the drastic stress changes particularly before the occurrence of a big earthquake. GPS observations have also indicated a major thrust region lying along ENE–WSW with stress alignment along ENE–WSW. The region on the west of the Kachchh Mainland Fault and the South Wagad Fault can be called as seismic gap region as very few major earthquakes have taken place in this region.     

Estimation of static stress changes after the 2001 Bhuj earthquake: Implications towards the northward spatial migration of the seismic activity in Kachchh,Gujarat

Spatial-temporal patterns of aftershocks of the 2001 Mw7.7 Bhuj earthquake during 2001–2008 reveal a northward spatial migration of seismic activity in the Kachchh seismic zone, which could be related with the loading stresses caused by the continued occurrences of aftershocks on the north Wagad fault (NWF), the causative fault of the 2001-mainshock. Aiming at explaining the observed northward migration of activity, we modelled the Coulomb failure stress change (DCFS) produced by the 2001-mainshock, the 2006 Mw5.6 Gedi fault (GF) and the 2007 Mw4.5 Allah bund fault (ABF) events on optimally oriented plane. A strong correlation between occurrences of earthquakes and regions of increased DCFS is obtained on the associated three faults i.e. NWF, ABF and GF. Predicted DCFS on the GF increased by 0.9 MPa at 3 km depth, where the 7^th March 2006 Mw5.6 event occurred, whereas predicted DCFS on the ABF increased by 0.07 MPa at 30 km depth, where the 15^th December 2007 Mw4.5 event occurred. Focal mechanism solutions of three events on the ABF have been estimated using the iterative inversion of broadband data from 5–10 stations, which are also constrained by the first P-motion data from 8–12 stations. These focal mechanism solutions for the ABF events reveal a dominant reverse movement with a strike-slip component along a preferred northwest or northeast dipping plane (∼50–70°). Focal mechanisms of the events on all the three fault zones reveal an N-S oriented P- axis or maximum principal stress in the region, which agrees with the prevailing N-S compression over the Indian plate. It is apparent that the northward migration of the static stress changes from the NWF, resulting from the occurrence 2001 Bhuj mainshock, might have caused the occurrence of the events on the GF and ABF during 2006–08.     

Intensity distribution of M 4.9 Haryana–Delhi border earthquake

In this study, we have prepared an intensity map based on macroseismic survey and all the available information from print and electronic media of damage and other effects due to March 05, 2012, M 4.9 Bahadurgarh (Haryana–Delhi border) earthquake and interpreted them to obtain modified Mercalli intensities (MMI) at over 62 locations surrounding the Haryana and Delhi. We have cross-checked the damage information from print and electronic media in the field at 25 sites within 110 km surrounding the epicenter for validation. Based on the questionnaire which is used in macroseismic survey and personal judgment, intensities were assigned accordingly as per physical survey at 25 sites and for rest based on media reporting. A maximum intensity of VI was assigned to this seismic event. Isoseismals of V and VI have been fully covered in the field observations. Beside this, some of the points have also been covered for isoseismal IV and isoseismal III and rest are based on media report only. The intensity map reveals several interesting features. Elliptically elongated shape of intensity map shows that most of the slightly damaged areas are concentrated toward the northwestern side of the epicenter having intensity V which may be due to directivity or site effects. A regression relation has also been derived between intensity and epicentral distance. The derived attenuation relation will be useful for assessing damage of a potential future earthquake (earthquake scenario–based planning purposes) for the Delhi NCR region.     

Pre-seismic, co-seismic and post-seismic displacements associated with the Bhuj 2001 earthquake derived from recent and historic geodetic data

The 26th January 2001 Bhuj earthquake occurred in the Kachchh Rift Basin which has a long history of major earthquakes. Great Triangulation Survey points (GTS) were first installed in the area in 1856–60 and some of these were measured using Global Positioning System (GPS) in the months of February and July 2001. Despite uncertainties associated with repairs and possible reconstruction of points in the past century, the re-measurements reveal pre-seismic, co-seismic and post-seismic deformation related to Bhuj earthquake. More than 25 Μ-strain contraction north of the epicenter appears to have occurred in the past 140 years corresponding to a linear convergence rate of approximately 10 mm/yr across the Rann of Kachchh. Motion of a single point at Jamnagar 150 km south of the epicenter in the 4 years prior to the earthquake, and GTS-GPS displacements in Kathiawar suggests that pre-seismic strain south of the epicenter was small and differs insignificantly from that measured elsewhere in India. Of the 20 points measured within 150 km of the epicenter, 12 were made at existing GTS points which revealed epicentral displacements of up to 1 m, and strain changes exceeding 30 Μ-strain. Observed displacements are consistent with reverse co-seismic slip. Re-measurements in July 2001 of one GTS point (Hathria) and eight new points established in February reveal post-seismic deformation consistent with continued slip on the Bhuj rupture zone.     

Assessment of predominant frequencies using ambient vibration in the Kachchh region of western India: implications for earthquake hazards

The Kachchh region is the second most seismically active region in India after the Himalaya. One of the disastrous Indian earthquakes of the millennium was the Bhuj earthquake of January 26, 2001, which caused about 14,000 casualties and huge property damage. The main reason for such devastation is due to lack of earthquake awareness and poor construction practices. Hence, an increase in the knowledge and awareness, based on improved seismic hazard assessment, is required to mitigate damage due to an earthquake. Natural predominant ground frequencies have been investigated in the Kachchh region of western India using ambient vibrations. The horizontal-to-vertical spectral ratio technique has been applied to estimate the predominant frequency at 126 sites. The ambient vibration measurements were conducted for about 1 h at each site in the continuous mode recording at 100 samples/s. We have validated the estimated predominant frequency with earthquake data recorded at six broadband stations in the region. It has been observed that geological time period has a significant effect on predominant frequency of the ground. The estimated predominant frequencies vary from 0.24 to 2.25 Hz for the Quaternary, 0.41–2.34 Hz for the Tertiary, 0.32–4.91 Hz for the Cretaceous, and 0.39–8.0 Hz for the Jurassic/Mesozoic. In the Deccan trap, it varies from 1.30 to 3.80 Hz. We found distinct variation of predominant frequencies of sites associated with hard rock and soft soil. The predominant frequencies were related to the thickness of the sediments, which are deduced by other geophysical and geological methods in the region. Our results suggest that frequencies of the region reveals the site characteristics that can be considered for studying the seismic risks to evolve a plan for disaster risk mitigation for the region.     

Mapping the liquefaction induced soil moisture changes using remote sensing technique: an attempt to map the earthquake induced liquefaction around Bhuj, Gujarat, India

The Bhuj earthquake (Mw = 7.9) occurred in the western part of India on 26th January 2001 and resulted in the loss of 20,000 lives and caused extensive damage to property. Soil liquefaction related ground failures such as lateral spreading caused significant damage to bridges, dams and other civil engineering structures in entire Kachchh peninsula. The Bhuj area is a part of large sedimentary basin filled with Jurassic, Tertiary and Quaternary deposits. This work pertains to mapping the areas that showed sudden increase in soil moisture after the seismic event, using remote sensing technique. Multi-spectral, spatial and temporal data sets from Indian Remote Sensing Satellite are used to derive the Liquefaction Sensitivity Index (LSeI). The basic concept behind LSeI is that the near infrared and shortwave infrared regions of electromagnetic spectrum are highly absorbed by soil moisture. Thus, the LSeI is herein used to identify the areas with increase in soil moisture after the seismic event. The LSeI map of Bhuj is then correlated with field-based observation on Cyclic Stress Ratio (CSR) and Cyclic Resistance Ratio (CRR), depth to water table, soil density and Liquefaction Severity Index (LSI). The derived LSeI values are in agreement with liquefaction susceptible criteria and observed LSI (R ² = 0.97). The results of the study indicate that the LSeI after calibration with LSI can be used as a quick tool to map the liquefied areas. On the basis of LSeI, LSI, CRR, CSR and saturation, the unconsolidated sediments of the Bhuj area are classified into three susceptibility classes.     

Site response of the Ganges basin inferred from re-evaluated macroseismic observations from the 1897 Shillong, 1905 Kangra,and 1934 Nepal earthquakes

We analyze previously published geodetic data and intensity values for the M _s = 8.1 Shillong (1897), M _s = 7.8 Kangra (1905), and M _s = 8.2 Nepal/Bihar (1934) earthquakes to investigate the rupture zones of these earthquakes as well as the amplification of ground motions throughout the Punjab, Ganges and Brahmaputra valleys. For each earthquake we subtract the observed MSK intensities from a synthetic intensity derived from an inferred planar rupture model of the earthquake, combined with an attenuation function derived from instrumentally recorded earthquakes. The resulting residuals are contoured to identify regions of anomalous intensity caused primarily by local site effects. Observations indicative of liquefaction are treated separately from other indications of shaking severity lest they inflate inferred residual shaking estimates. Despite this precaution we find that intensites are 1–3 units higher near the major rivers, as well as at the edges of the Ganges basin. We find evidence for a post-critical Moho reflection from the 1897 and 1905 earthquakes that raises intensities 1–2 units at distances of the order of 150 km from the rupture zone, and we find that the 1905 earthquake triggered a substantial subsequent earthquake at Dehra Dun, at a distance of approximately 150 km. Four or more M = 8 earthquakes are apparently overdue in the region based on seismic moment summation in the past 500 years. Results from the current study permit anticipated intensities in these future earthquakes to be refined to incorporate site effects derived from dense macroseismic data.     

Internal geometry of reactivated and non-reactivated sandblow craters related to 2001 Bhuj earthquake,India: A modern analogue for interpreting paleosandblow craters

The liquefaction attributes and crater geometry related to 2001 Bhuj earthquake has been reconstructed by trenching along large known craters formed near Umedpar in Kachchh. The study characterises the liquefied sediments in a large reactivated crater and distinguishes it from a non-reactivated crater located nearby. These characteristics can help in the interpretation of large paleocraters formed as a result of earthquake induced liquefaction.     

Magnetotelluric impedance tensor analysis for identification of transverse tectonic feature in the Wagad uplift,Kachchh, northwest India

The 2001 Bhuj earthquake (Mw 7.7) occurred in northwestern region of Indian peninsula has reactivated a couple of transverse faults to its surroundings. Intermediate to moderate magnitude earthquakes are occurring along these faults which includes recent Dholavira earthquake (Mw 5.1, 2012) suggesting distinct tectonic scenario in the region. We present the results of magnetotelluric (MT) impedance tensors analyses of 18 sites located along a profile cutting various faults in the uplifted Wagad block of the Kachchh basin. The MT time series of 4–5 days recording duration have been processed and the earth response functions are estimated in broad frequency range (0.01–1000 s). The observed impedance tensors are analyzed by using three decomposition techniques as well as by the phase tensor method constraining with the induction arrows. The analyses suggest distinct tectonic feature within the block bounded by the South Wagad Fault (SWF) and the North Wagad Fault (NWF) particularly in the period band of 1–10 s. In the south of NWF, the telluric vectors and the major axes of the phase ellipses are aligned in the NNW–SSE to NW–SE direction where as a dominant E–W strike is obtained for northern side of the NWF. The transverse geo-electric strike coincides with the prominent clustering of seismicity after the Bhuj earthquake and trend of the Manfara transverse fault is located in close vicinity of the study area. We therefore suggest the presence NNW–SSE trending transverse structural feature in the Wagad uplift of the basin appears to play significant role in the current seismicity of the active intraplate region.     

Spectral discrimination of Recent sediments around Bhuj, India, using Landsat-TM data and assessment of their vulnerability to seismicity-related failures

Kachchh region of India is a rift basin filled with sediments from Jurassic to Quaternary ages. This area is tectonically active and witnessed several major earthquakes since the recent historical past. During an earthquake event, the water-laden foundation soil liquefies and causes damage to buildings and other civil engineering structures. The January 26, 2001, Bhuj earthquake demonstrated extensive liquefaction-related damages in entire Kachchh Peninsula. Therefore, evaluation of liquefaction susceptibility of unconsolidated sediments is a vital requirement for developing seismic microzonation maps. In this paper, a new approach involving remote sensing techniques and geotechnical procedures is demonstrated for effective mapping of liquefaction-susceptible areas. The present and paleo-alluvial areas representing unconsolidated sediments were mapped using Landsat-TM data and field reflectance spectra. Spectral discrimination of alluvial area was made using the feature-oriented principal component selection and spectral angle mapping techniques. Subsequently, field geotechnical investigations were carried out in these areas. It is evident from the results that the alluvial soils are predominantly sandy loam with very low (7–28) standard penetration test values. The evaluated factor of safety for these soils varies from 0.43 to 1.7 for a peak ground acceleration of 0.38. Finally, a liquefaction susceptibility map is prepared by integrating results on alluvium distribution, factor of safety, and depth to water table.