甘肃干沙鄂博稀土矿床熔体和流体包裹体对成矿的制约

甘肃天祝干沙鄂博稀土矿床产于霓辉正长岩和霓辉正长斑岩中,矿体形态呈不规则脉状、透镜状和板状。成矿过程可分为岩浆期、岩浆-热液期、热液期和表生期,其中岩浆-热液期为主要成矿期。本矿床中的包裹体有熔体包裹体、流体-熔体包裹体、H_2O包裹体、CO_2包裹体、CO_2-H_2O包裹体、含子矿物H_2O包裹体和含子矿物CO_2-H_2O包裹体7类,并以富含流体-熔体包裹体、CO_2-H_2O包裹体为显著特征。包裹体组合从熔体包裹体→流体-熔体包裹体、H_2O包裹体、CO_2包裹体和CO_2-H_2O包裹体→H_2O包裹体的变化,反映本矿床的形成经历了从岩浆→岩浆+热液→热液的演化过程。岩浆期熔体包裹体均一温度为780℃;岩浆-热液期均一温度为191~700℃,盐度为5.26%~22.24%,属中低盐度,成矿压力为68~95 MPa,相应的成矿深度为2.6~3.6 km;热液期均一温度为129~225℃,盐度为0.35%~7.73%,为低盐度。从岩浆期到岩浆-热液期再到热液期,温度逐渐降低,矿化作用主要发生在岩浆-热液期,属中高温、中深成岩浆-热液过渡型矿床。     

辽宁白云金矿床成矿流体特征、成矿物质来源及成因研究

辽宁白云金矿是辽东-吉南裂谷带内典型的大型金矿床,其成矿作用复杂,为了深入揭示其成矿流体、成矿物质来源及成矿模式特征,针对白云金矿石进行流体包裹体、H,O,S及与成矿有关的岩体的研究,结果显示:5块金矿石流体包裹体的均一温度范围为152℃~370℃,主要分布在240℃~310℃,激光拉曼成分主要为CO_2和CH_4,有少量H_2O,极少数有N_2;5块金矿石δ~(34)S值为-8.5‰~+1.6‰(平均为-4.85‰),赋矿围岩(黑云片岩、变粒岩)中δ~(34)S值为+10.0‰~+17.0‰(平均为+14.57‰),地层大理岩的δ~(34)S值为-0.5‰~+13.2‰(平均为+7.17‰);5块金矿石石英中δ~(18)O为8.0‰~15.5‰,δD为-96.3‰~-73.6‰;与成矿有关的新岭岩体SHRIMP U-Pb年龄为217.6Ma±2.2Ma。流体包裹体特征表明:成矿流体为中温低盐度低密度的水盐流体,属于含N_2的H_2O-CO_2-CH_4-NaCl体系。流体中CO_2及CH_4形成与大理岩有关,极少数的N_2含量可能与大气水有关。氢氧同位素结果显示,成矿热液主要来源于深部岩浆水,后期混有部分大气降水。硫同位素特征表明,成矿物质可能主要来自岩浆热液。综上,白云金矿床的主成矿期为印支期,白云金矿床属于岩浆热液型金矿。     

浙江中部火山岩地区金矿床流体包裹体的研究

本文主要记述了治岭头、八宝山和庄山三个矿区,通过与金矿有关的流体包裹体的研究,阐明了成矿的物理化学条件和矿床的成因。它们的成矿温度主要集中于140～330℃,为低温矿床。成矿的压力集中于12～41MPa,成矿深度约为0.3～1.2km。气体组分的还原参数较低,平均为0.4,fo_2约为10~(-32)～10~(-41),成矿溶液富水和CO_2。治岭头成矿溶液为NaCl-KCl-CaSO_4-H_2O体系,而八宝山为KCl-NaCl-CaSO_4-H_2O体系,属于弱酸性。成矿溶液的含盐度为(0.7～2.5)wt%NaCl,属于低盐度,其密度值为0.7～0.85g/c1m~3。流体包裹体氢氧同位素δD(‰)为-58.5至91.1,δ~(18)O_(H_2O)(‰)为+3至-9,成矿溶液主要由大气降水(或地下水)和岩浆热液混合组成。     

新疆托里县哈西金矿床包裹体-同位素地球化学及成因探讨

哈西金矿床位于哈萨克斯坦―准噶尔板块(Ⅰ级)唐巴勒―卡拉麦里沟弧带(Ⅱ级)西准南部扎依尔推覆体(Ⅲ级)玛依勒―哈图构造块体(Ⅳ)。通过矿床流体包裹体岩相学、显微测温学和包裹体激光拉曼光谱分析研究成矿流体性质,探讨矿床成因类型。研究结果表明,流体包裹体有气液两相、含纯液相和纯气相包裹体3种类型。气相成分以CO_2为主,其次是H_2O,总体属于CH_4-H_2O-CO_2体系;结合氢氧同位素地球化学特征(δD值为-60‰~-67.4‰;δ~(18)O值为14.3‰~16.8‰),以及稀土配分和同位素定年证据,确定本区成矿物质来于深部,成矿流体主要来源于火山-次火山岩浆热液,矿床形成于海西期具两阶段成矿特点,属中低温热液矿床。     

三道湾子金矿床流体包裹体及稳定同位素地球化学特征

三道湾子金矿位于大兴安岭燕山期成矿带东南部,为典型的石英脉型金矿.通过对矿床地质特征、成矿期次及硫、氢、氧同位素组成和流体包裹体测温研究,讨论了成矿流体的来源及矿床形成的温度.黄铁矿δ34S值为-1.1‰～1.7‰,显示硫具地幔来源的特点;石英δ18O水值为-15.3‰～-9.9‰,δDV-SMOW值为-110‰～-85‰,说明成矿流体主要为大气降水;流体包裹体均一温度为181～267℃;表明三道湾子金矿为与火山热液有关的中-低温浅成热液矿床.     

豫西南高庄金矿床流体包裹体组合研究及其成矿流体特征

高庄金矿床形成于华北板块和扬子板块造山后的板内伸展环境,矿体是二郎坪群中充填于平行造山带走向的脆韧性剪切带中的石英-金多金属硫化物矿脉。本次运用"流体包裹体组合"(FIA)方法进行流体包裹体特征研究。研究表明,高庄金矿含矿石英中包裹体主要有CO_2-H_2O型三相包裹体、CO_2包裹体和水溶液包裹体3种类型,其中,CO_2-H_2O型三相包裹体为主体类型,完全均一温度变化范围为286~349℃,w(Na Cleq)为0.41%~4.14%,估算流体密度为0.788~0.874 g/cm3,成矿压力为130~160 MPa,成矿深度为4.8~5.9 km,成矿流体具有中温,富CO_2、低盐度的特征。在同一视域内可见CO2-H2O型三相包裹体和水溶液包裹体共存,均一方式各异,且均有相近的均一温度,指示存在流体不混溶作用。成矿流体中水的δDH_2O=-83.4‰~-76.3‰,δ18OH_2O=5.8‰~7.1‰,显示成矿流体来自于岩浆热液。结合区域构造背景,认为高庄金矿床为形成于华北板块与扬子板块碰撞造山作用后,板块内部构造变形过程中形成的中温岩浆热液型金矿。     

流体包裹体特征及其地质意义——以甘肃省芨岭铀矿床为例

为确定芨岭铀矿成矿流体的性质,对成矿期碳酸盐脉开展了详细的流体包裹体研究。包裹体岩相学和显微测温结果表明,碳酸盐脉主要发育气相包裹体、液相包裹体和纯液相包裹体;包裹体均一温度为141~295℃(峰值分别为170~180℃、240~250℃),盐度为2.09%~7.69%Na Cleqv(峰值5%~6%NCleqv),属于低-中温、低盐度铀矿床。激光拉曼和群体包裹体成分分析结果显示:成矿流体气相成分以CH_4、H_2为主,H_2S、N_2、CO_2次之,液相成分富H_2O和CH_4,成矿流体属于NaCl-H_2O±CH_4±CO_2体系。结合C、O同位素组成,δ~(13)C_(VPDB)值在-1.50‰~-6.33‰之间,δ~(18)O_(SMOW)值为-2.577‰~5.051‰,成矿热液的水源主要为岩浆热液与大气降水混合特征,且以大气降水形成为主。结合成矿流体特征,流体不混溶或沸腾作用导致相分离产生铀沉淀,以及流体脱气(CO_2)作用导致铀矿质沉淀、富集,是芨岭铀成矿的主要成因。     

厄立特里亚Koka金矿床成矿流体特征及其地质意义

厄立特里亚Koka金矿床产于努比亚地盾新元古代浅变质岩系中,矿体主要赋存于Koka微晶花岗岩内,受剪切构造控制,是在该国发现的大型造山型金矿床。矿床含金石英脉中石英中赋存的原生流体包裹体分为富CO_2包裹体、CO_2-H_2O包裹体和H_2O包裹体共3种类型,以大量发育富CO_2包裹体与CO_2-H_2O包裹体为特征。成矿流体具有富CO_2、中低温(210～360℃)、中低盐度(w(NaCl_(eq))=2.24%～8.51%)的特征。流体中阳离子主要为Na~+与少量K~+,阴离子为Cl~-与少量SO_4~(2-),气相成分主要为CO_2与H_2O,基本不含其他气体组分,流体属于NaCl-H_2O-CO_2体系。成矿流体密度变化范围较大(0.597～0.969 g/cm~3),其中高密度的富CO_2包裹体捕获的最小P-T条件为260～360℃、100～270 MPa,形成于区域变质作用时期。成矿流体的δD_(V-SMOW)范围为-57‰～-50.1‰,δ~(18)O_水范围为1.4‰～3.2‰,表明Koka金矿床成矿流体主要来源于变质热液,并伴有大气降水的混入。成矿流体中CO_2-H_2O包裹体气相分数变化范围很大(15%～80%),与之共生的H_2O包裹体具有相似的盐度以及较低的均一温度,表明初始的CO_2-H_2O型流体发生了不混溶作用,导致相分离,产生的大量富CO_2流体,并使金大量沉淀。     

大兴安岭北段得耳布尔铅锌银矿床成矿流体特征与意义

得耳布尔矿床是产于大兴安岭北段额尔古纳地块内的大型铅锌银矿床,本文通过对闪锌矿、石英进行流体包裹体均一温度、盐度、激光拉曼和氢氧同位素测试以研究其成矿流体特征与来源。结果显示主成矿期闪锌矿及团块状石英中流体包裹体均一温度范围为213~260℃,盐度为3.05%~9.6%NaCleq;成矿晚期脉状石英中流体包裹体均一温度介于175~210℃之间,盐度3.53%~7.15%NaCl_(eq)。红外激光拉曼结果显示包裹体气相成分主要为H_2O及CO_2,含极少量CH_4。石英氢、氧同位素测试结果显示主成矿期δD_水值为-153.8‰~-149‰,δ~(18)O_水值为-0.77‰~2.38‰;成矿晚期δD_水值为-154‰~-141.4‰,δ~(18)O_水值为-2.27‰~-0.47‰。矿床成矿流体为岩浆水与演化大气降水的混合。额尔古纳地块内铅锌银多金属矿床成矿流体特征较为接近,主要为中低温低盐度NaCl-H_2O-CO_2±CH_4成矿流体;流体来源一致,推测为演化的大气降水与岩浆水的混合。     

黑龙江争光金矿地质地球化学研究

通过氢、氧、铅同位素和流体包裹体测试,结合争光金矿床的地质、微量元素、稀土元素地球化学特征研究,表明争光金矿为岩浆低温热液矿床.成矿物质主要来源于地层,矿化类型为蚀变岩型和石英脉型.成矿流体为岩浆水、变质水和大气降水的混合液.δD值为-63‰～-85‰,δ18O水值为-0.2‰～-7.0‰,主成矿阶段温度为133～276℃.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案（1999/30/EC）,对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10 μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提出了具体测定要求。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.