Formation and fragmentation of a late Miocene supradetachment basin in central Crete: implications for exhumation mechanisms of high‐pressure rocks in the Aegean forearc

We present a new lithostratigraphy and chronology for the Miocene on central Crete, in the Aegean forearc. Continuous sedimentation started at ～10.8 Ma in the E–W trending fluvio‐lacustrine Viannos Basin, formed on the hangingwall of the Cretan detachment, which separates high‐pressure (HP) metamorphic rocks from very low‐grade rocks in its hangingwall. Olistostromes including olistoliths deposited shortly before the Viannos Basin submerged into the marine Skinias Basin between 10.4 and 10.3 Ma testifies to significant nearby uplift. Uplift of the Skinias Basin between 9.7 and 9.6 Ma, followed by fragmentation along N–S and E–W striking normal faults, marks the onset of E–W arc‐parallel stretching superimposed on N–S regional Aegean extension. This process continued between 9.6 and 7.36 Ma, as manifested by tilting and subsidence of fault blocks with subsidence events centred at 9.6, 8.8, and 8.2 Ma. Wholesale subsidence of Crete occurred from 7.36 Ma until ～5 Ma, followed by Pliocene uplift and emergence. Subsidence of the Viannos Basin from 10.8 to 10.4 Ma was governed by motion along the Cretan detachment. Regional uplift at ～10.4 Ma, followed by the first reworking of HP rocks (10.4–10.3 Ma) is related to the opening and subsequent isostatic uplift of extensional windows exposing HP rocks. Activity of the Cretan detachment ceased sometime between formation of extensional windows around 10.4 Ma, and high‐angle normal faulting cross‐cutting the detachment at 9.6 Ma. The bulk of exhumation of the Cretan HP‐LT metamorphic rocks occurred between 24 and 12 Ma, before basin subsidence, and was associated with extreme thinning of the hangingwall (by factor ～10), in line with earlier inferences that the Cretan detachment can only explain a minor part of total exhumation. Previously proposed models of buyoant rise of the Cretan HP rocks along the subducting African slab provide an explanation for extension without basin subsidence.     

Two-phase evolution of the Shadow Valley Basin, south-eastern California: a possible record of footwall uplift during extensional detachment faulting

Miocene strata of the Shadow Valley Basin rest unconformably on the upper plate of the Kingston Range - Halloran Hills detachment fault system in the eastern Mojave desert, California. Basin development occurred in two broad phases that we interpret as a response to changes in footwall geometry. In southern portions of the basin, south of the Kingston Range, phase one began with near synchronous initiation of detachment faulting, volcanism and basin sedimentation shortly after 13.4 Ma. Between c. 13.4 and c. 10 Ma, concordantly bedded phase one strata were deposited onto the subsiding hangingwall of the detachment fault as it was translated 5–9 km south-westward with only limited internal deformation. Phase two (c. 10 to 8–5 Ma) is marked by extensional dismemberment of the detachment fault's upper plate along predominantly west-dipping normal faults. Phase two sediments were deposited synchronously with upper-plate normal faulting and unconformably overlie phase one deposits, displaying progressive shallowing in dip and intraformational onlap. Northern portions of the basin, in the Kingston Range, experienced a similar two-phase development compressed into a shorter interval of time. Here, phase one occurred between c. 13.4 and 12.8–12.5 (?) Ma, whereas phase two probably lasted for no more than a few 100000 years immediately prior to c. 12.4 Ma. Differences in the duration of basin development in and south of the Kingston Range apparently relate to position with respect to the detachment fault's breakaway; northern basin exposures overlie the upper plate adjacent to the breakaway (0–15 km) whereas southern basin exposures occur far from the breakaway (20–40 km). We interpret the phase one to phase two transition as recording breakup of the detachment fault's hangingwall during footwall uplift. We propose a model for supradetachment basin evolution in which early, concordantly bedded basin strata are deposited on the hangingwall as it translates intact above a weakly deforming footwall. With continuing extension, tectonic denudation along the detachment fault leads to an increasing flexural isostatic footwall response. We suggest that isostatic footwall uplift may drive internal breakup of the upper plate as the detachment fault is rotated to a shallow dip, mechanically unfavourable for simple upper-plate translation. Additionally, we argue that continuing hangingwall thinning during phase two places geometrical constraints on the timing, amount and, thus, rate of footwall uplift. Kinematically determined footwall uplift rates (0.5–4.5 mm/yr) are comparable with rates determined independently by thermochronological and geobarometric methods.     

Depositional and tectonic evolution of a supradetachment basin: 40Ar/39Ar geochronology of the Nova Formation, Panamint Range, California

The Nova Basin contains an upper Miocene to Pliocene supradetachment sedimentary succession that records the unroofing of the Panamint metamorphic core complex, west of Death Valley, California. Basin stratigraphy reflects the evolution of sedimentation processes from landslide emplacement during basin initiation to the development of alluvial fans composed of reworked, uplifted sections of the basin fill. ⁴⁰Ar/³⁹Ar geochronology of volcanic units in middle and lower parts of the sequence provide age control on the tectonic and depositional evolution of the basin and, more generally, insights regarding the rate of change of depositional environments in supradetachment basins. Our work, along with earlier research, indicate basin deposition from 11.38 Ma to 3.35 Ma. The data imply sedimentation rates, uncorrected for compaction, of ~100 m Myr⁻¹ in the lower, high-energy part to ~1000 m Myr⁻¹ in the middle part characterized by debris-flow fan deposition. The observed variation in sediment flux rate during basin evolution suggests that supradetachment basins have complex depositional histories involving rapid transitions in both the style and rate of sedimentation.     

Structure of the footwall of a listric fault system revealed by 3D seismic data from the Niger Delta

We use three‐dimensional (3D) seismic reflection data to analyse the architecture of the footwall of a listric fault, in a gravitationally driven extensional system, in the north‐western Niger Delta. In contrast to conventional listric normal fault models with a single master listric fault plane the level of detachment switches from a deeper to shallower level. The footwall evolves through the generation of new master detachment faults and detachments, which transfers hanging wall rocks into the footwall. New detachments form by branching off pre‐existing detachment levels, cutting‐up through stratigraphy to the next mechanical weakness, separating discrete sections of extended strata. As a consequence a deeper, older array of seaward‐dipping, tilted extensional fault blocks is now located in the footwall beneath the master listric detachment fault. The structural complexity located below the master detachment fault highlights extensional episodes on separate detachment faults that are not captured in conventional listric models. We speculate that changes in the level of the detachment are caused by mechanical weaknesses controlled by lithology, pore pressure and episodes of sediment loading related to deltaic progradation.     

Extensional tectonic regimes in the Aegean basins during the Cenozoic

Abstract Kinematics of faults in the Northern Aegean show three extensional tectonic regimes the tensional directions of which trend (1) WNW-ESE, (2) NE-SW and (3) N-S. These were active during the Upper Miocene, Pliocene-Lower Pleistocene and Mid Pleistocene-Present day, respectively. The main characteristics of the stress patterns (1) and (2) on the overall Aegean is tentatively explained by variations of the horizontal lithospheric stress value σ_zz due to the slab push and of the vertical lithospheric stress value σ_zz due to mass heterogeneities. During the Mid Pleistocene-Present, due to the slab push, tectonics were compressional along the arc boundary: σ_zz was σ1. In the Aegean basins, tectonics were extensional, c_2Z was σ1 as a consequence of the thickness of the continental crust and, possibly of an updoming asthenosphere; thus σ_zz became σ2, allowing tension σ3 to be orthogonal to the compression along the arc, i.e. to be roughly parallel to the arc trend. During the Pliocene-Lower Pleistocene, the extensional regime was distinctly different. The tensional directions were roughly radial to the arc. It is suggested that σ_zz was weakly compressional, or eventually tensional, due a seaward migration of the slab so that σ_zz became σ3. In the Northern Aegean, the stress pattern has been also controlled by the westward push of the Anatolian landmass. During the Mid Pleistocene-Present day, this was typically extensional (al was vertical) and the right lateral strike-slip motion on the North Anatolian Fault transformed into a N-S-stretching, E-W-shortening of the Northern Aegean. Dextral strike-slip motions along the North Aegean Trough fault zone were possible on NE-SW-striking faults. During the Pliocene-Lower Pleistocene, normal fault components were higher; however, because the angle between the NE-SW trend of the tensional axis and the strike of the fault zone was acute, dextral strike-slip components were possible on all the faults striking NE-SW to E-W. A clockwise 15^o rotation of Limnos with respect to Samothraki, Thraki and Thassos, suggested by structural data, was probably associated with these dextral motions. The WNW-ESE trending tension during the Upper Miocene indicates that the dextral North Anatolian Fault had not yet merged into the North Aegean Trough fault zone at that time. We propose that the formation of Aegean basins during the Cenozoic was related to the activity of two major Hellenic arcs. The ‘Pelagonian-Pindic Arc’ resulted in the formation of the subsident Aegean basins of Middle Eocene-Lower Miocene age and of the older Northern Aegean orogenic volcanism. The ‘Aegean Arc’ resulted in the formation of the subsident Aegean basins of Middle Miocene to Present day age and of the Southern Aegean orogenic volcanism. Were these arcs associated with a unique subduction zone or with two such zones ? In the first case, the slab is no more than 16 Myr old, in the second it may be as old as 45–50 Myr. The answer depends on the accuracy of the seismic tomography profiles.     

Supradetachment basin evolution unravelled by detrital apatite fission track analysis: the Gediz Graben (Menderes Massif,Western Turkey)

The Menderes Massif is a Tertiary metamorphic core complex tectonically exhumed in the late Oligocene–Miocene during coeval development of a series of E–W‐trending basins. This study analyses the source‐to‐sink evolution of the Gediz Graben and the exhumation pattern of the Central Menderes Massif at the footwall and hanging wall of the Gediz Detachment Fault. We use a comprehensive approach to detrital apatite fission track dating combining analysis of modern river sediments, analysis of fossil sedimentary successions and mineral fertility determinations. This approach allowed us to: (i) define the modern short‐term erosion pattern of the study area, (ii) unravel the long‐term exhumation history, (iii) identify major exhumation events recorded in the sedimentary basin fill and (iv) constrain the maximum depositional age of the sedimentary succession. Three main exhumation events are recorded in the analysed detrital samples: (i) a late Oligocene/early Miocene exhumation event involving the whole Menderes Massif; (ii) a late Miocene event involving the northern edge of the Central Menderes Massif; (iii) a Plio‐Quaternary more localized event involving only the western part of the southern margin of the basin (Salihli area) and bringing to the surface the Gediz Detachment and its intrusive footwall (Salihli granodiorite). The modern short‐term erosion pattern closely reflects this latter Plio‐Quaternary event. Single grain‐age distributions in the sedimentary basin fill highlight drainage pattern reorganizations in correspondence of the transition between different stratigraphic units, and allowed to better constrain the depositional age of the sedimentary units of the basin pointing to a possible onset of sedimentation in the basin during the middle Miocene.     

Sedimentation and deformation in a Pliocene–Pleistocene transtensional supradetachment basin, Laguna Salada, north-west Mexico

This study examines a thick section of Pliocene–Pleistocene sedimentary rocks exposed in the footwall of an active normal fault (Cañon Rojo fault) near its intersection with the dextral-normal Laguna Salada fault in north-western Mexico. These rocks are situated in the upper plate of an inactive strand of the Cañada David detachment fault, which is cut on the north-east by the Laguna Salada fault. The stratigraphy is divided into three unconformity-bounded sequences: (1) marine mudstone of the Pliocene Imperial Formation; (2) nonmarine Pliocene–Pleistocene redbeds, consisting of sedimentary breccia, conglomerate, conglomeratic sandstone (all un-named) and fine-grained sandstone and mudstone of the Palm Spring Formation; and (3) uncemented Pleistocene boulder gravel. Coarse deposits of the redbeds sequence were deposited in fault-bounded, high- and low-gradient alluvial fans that passed laterally into a low-energy fluvial plain of the ancestral Colorado River (Palm Spring Formation) which occupied the present-day Laguna Salada. Detailed mapping reveals convergence and lap-out of bedding surfaces in the redbeds sequence onto the west limb of a large anticline cored by Imperial Formation. These geometries, combined with fanning dips and thickening of stratigraphy into the flanking syncline, indicate that the anticline grew during deposition of the redbeds. Fold axes of the growth anticline and smaller related folds trend N to NNE, parallel to the strike of associated normal faults and perpendicular to the extension direction. Based on its orientation, large size and relationship to neighbouring structures, the anticline is interpreted to be a fault-bend fold that grew in response to slip of the upper plate over a bend in the Cañada David detachment fault during deposition in a transtensional supradetachment basin. Localized subsidence in the flanking syncline resulted in deposition of >1000 m of alluvial sediments near its intersection with the Laguna Salada fault. Sedimentary detritus is derived exclusively from the north-east (footwall) side of the dextral-normal Laguna Salada fault, indicating that topographic relief was high in the Sierra Cucapa and was subdued or negligible in the footwall of the coeval Cañada David detachment. Following deposition of the redbeds and grey gravel units, the northern part of the detachment fault was abandoned and the modern Cañon Rojo fault was initiated, producing rapid footwall uplift and erosion of previously buried stratigraphy. Slip rate on the Cañon Rojo fault is estimated to be ≈2–4 mm yr^?1 since middle Pleistocene time, similar to the late Pleistocene to Holocene rate determined in previous studies.     

Neogene tectonics and basin fill patterns in the Hellenic outer-arc (Crete, Greece)

Six time-slice reconstructions in the form of palaeogeographical maps show the large-scale tectonic and sedimentary evolution of the Hellenic outer-arc basins in central and eastern Crete for the middle and late Miocene. The reconstructions are based on extensive field mapping and a detailed chronostratigraphy. Latest compressional features related to subduction and associated crustal thickening are poorly dated and assigned a middle Miocene age. These are possibly contemporaneous with widespread occurrence of breccia deposits all over Crete. The precise date for the onset of extension, possibly controlled by the roll-back of the subsiding African lithosphere, remains at this point a discussion. We present circumstantial evidence to place the beginning of the roll back in the middle Miocene, during the accumulation of an arc-parallel, westward-draining fluvial complex. The continental succession is transgressed steadily until it is interrupted by an important tectonic event at the boundary of the middle and late Miocene (normally seen as the onset of slab roll-back). In the earliest late Miocene a few large-sized fault blocks along arc-parallel normal faults subsided rapidly causing a deepening of the half-graben basins up to approximately 900 m. About 1 Myr later, a new N020E and N100E fault system developed fragmenting the existing half-grabens into orthogonal horst and graben structure. The development of the new fault system caused original continental regions to subside and original deep basins to emerge, which is not easy to reconcile with roll back controlled extensional processes alone. Underplating and inherited basement structure may have played here an additional role, although evidence for firm conclusions is lacking. In late Miocene times (late Tortonian, ≈7.2 Ma), the extensional outer arc basins become deformed by N075E-orientated strike-slip. The new tectonic regime begins with strong uplift along existing N100E fault zones, which developed about E–W-striking topographical highs (e.g. Central Iraklion Ridge and Anatoli anticline) in about 0.4 Myr. The strong uplift is contemporaneous with abundant landsliding observed along an important N075E fault zone crossing eastern Crete and with renewed volcanic activity of the arc. The origin of the ridges may be due to active folding related to the sinistral slip.     

The Sub-Balkan graben system of central Bulgaria

The Sub-Balkan graben system in central Bulgaria forms the present northern boundary of the Aegean extensional region. This east-trending graben system lies along the southern flank of the Stara Planina range and consists mainly of half-grabens. The sedimentary fill in the grabens ranges in age from late Miocene to Recent and records the initiation and evolution of the graben system. The sedimentary fill in the grabens is oldest in the central graben and becomes progressively younger to the west and east, indicating a diachronous development of the grabens. Grabens are formed in the hangingwalls of south-dipping low-angle normal faults which have been displaced by younger higher angle normal faults along the foot of the Stara Planina. Hangingwall rocks have been complexly faulted and rotated such that some graben fill has been rotated down-to-the-north. The Sredna Gora range south of the grabens is part of a complexly faulted and rotated hangingwall block bounded on the south by south-dipping normal faults forming the northern boundary of the Thracian Basin. The Stara Planina range has been formed by uplift and rotation due to footwall unloading along the low-angle normal faults and forms the northern margin of the graben system. Most of the topography of Bulgaria south of the Sub-Balkan graben system is the result of late Miocene to Recent extensional processes linked to the Aegean region that have been superposed on convergent features and earlier extensional features that extend back to late Eocene time.     

Tectonics of the late Mesozoic wide extensional basin system in the China–Mongolia border region

The China–Mongolia border region contains many late Mesozoic extensional basins that together constitute a regionally extensive basin system. Individual basins within the system are internally composed of a family of sub‐basins filled with relatively thin sedimentary piles mostly less than 5 km in thickness. There are two types of sub‐basins within the basins, failed and combined, respectively. The failed sub‐basins are those that failed to continue developing with time. In contrast, the combined ones are those that succeeded in growing by coalescing adjacent previously isolated sub‐basins. Thus, a combined sub‐basin is bounded by a linked through‐going normal fault that usually displays a corrugated trace on map view and a shallower dip on cross‐section. Along‐strike existence of discrete depocenters and alternation of sedimentary wedges of different types validate the linkage origin of combined sub‐basins. Localized high‐strain extension resulted in large‐amount displacement on linked faults, but contemporaneously brought about the cessation of some isolated fault segments and the formation of corresponding failed sub‐basins in intervening areas between active linked faults. Some combined sub‐basins might have evolved into supradetachment basins through time, concurrent with rapid denudation of footwall rocks and formation of metamorphic core complexes in places. A tectonic scenario of the broad basin system can be envisioned as an evolution from early‐stage distributed isolated sub‐basins to late‐stage focused combined or/and supradetachment sub‐basins bounded by linked faults, accompanied by synchronous cessation of some early‐formed sub‐basins. Initiation of the late Mesozoic extension is believed to result from gravitational collapse of the crust that had been overthickened shortly prior to the extension. Compression, arising from collision of Siberia and the amalgamated North China–Mongolia block along the Mongol–Okhotsk suture in the time interval from the Middle to Late Jurassic, led to significant shortening and thickening over a broad area and subsequent extensional collapse. Pre‐ and syn‐extensional voluminous magmatism must have considerably reduced the viscosity of the overthickened crust, thereby not only facilitating the gravitational collapse but enabling the lower‐middle crust to flow as well. Flow of a thicker crustal layer is assumed to have occurred coevally with upper‐crustal stretching so as to diminish the potential contrast of crustal thickness by repositioning materials from less extended to highly extending regions. Lateral middle‐ and lower‐crustal flow and its resultant upward push upon the upper crust provide a satisfying explanation for a number of unusual phenomena, such as supracrustal activity of the extension, absence or negligibleness of postrift subsidence of the basin system, less reduction of crustal thickness after extension, and non‐compression‐induced basin inversion, all of which have been paradoxical in the previous study of the late Mesozoic basin tectonics in the China–Mongolia border region.     

Testing models of rift basins: structure and stratigraphy of an Eocene–Oligocene supradetachment basin, Muddy Creek half graben, south-west Montana

We examine the basin geometry and sedimentary patterns in the Muddy Creek half graben of south-west Montana by integrating geological mapping, structural and basin analysis, ⁴⁰Ar/³⁹Ar geochronology, biostratigraphy and reflection seismic data. The half graben formed in late Middle Eocene to early Oligocene (?) time at the breakaway of a regional, WSW-dipping detachment system. Although the structure of the half graben is that of a supradetachment basin, facies patterns and basin architecture do not conform to a recent model for extensional basins above detachment faults. The border fault, the Muddy Creek fault system, consists of three en echelon, left-stepping normal faults separated by two relay ramps. The fault steepens southward toward each en echelon step, ranges in dip from 8 to 60° near the surface, but flattens at depths between 0 and 3 km. A broad ENE-plunging displacement-gradient syncline defines the central part of the half graben and is flanked by narrow SE-and NE-plunging anticlines to the north and south. Fine-grained deposits of the syntectonic basin-fill are thickest in the central syncline and interfinger with footwall-derived conglomerate near the adjacent anticlines. These facies patterns suggest that folding was coeval with extension and sedimentation in the half graben. Pre-extensional volcanic rocks and interbedded conglomerate filled a major ESE-trending palaeovalley along the future axis of the Muddy Creek half graben. Synextensional sedimentary deposits include lacustrine and paludal shale, mudstone and sandstone ponded in the centre of the half graben, and a narrow (typically <1.5 km wide) fringe of coarse alluvial-fan and fan-delta conglomerate and sandstone derived from the footwall. Angular unconformities and rock-slide deposits occur only locally within the syntectonic sequence. These facies patterns agree well with the half-graben depositional model of Leeder & Gawthorpe but not with a more recent supradetachment basin model of Friedmann & Burbank despite the demonstrably low dip-angle of the basin-bounding normal fault. These data show that it may not be possible to differentiate between supradetachment basins and half graben with steeper border faults using the architecture of the associated basin-fill deposits.     

Roll-back controlled vertical movements of outer-arc basins of the Hellenic subduction zone (Crete, Greece)

Crustal thickening north of the Hellenic subduction zone continued in the most external zones (e.g. Crete) probably until the late middle Miocene. The following period of predominant extension has been related by various workers to a number of causes such as: (1) trench retreat (roll back) driven by the pull of the African slab and (2) gravitational body forces associated with the thickened crust, both in combination with NNE motion of the African plate combined with westward extrusion of the Anatolian block along the North Anatolian Fault. To verify these hypotheses an inventory of fault orientations and fault-block kinematics was carried out for central and eastern Crete and adjoining offshore areas by combining satellite imagery, digital terrain models, and structural, seismic, sedimentary and stratigraphical field data, all set up in a GIS. The GIS data set enabled easy visualization and combination of data, which resulted in a relatively objective analysis. The geological results are discussed in the light of a numerical model that investigated the intraplate stresses resulting from the above mentioned forces. Our tectonostratigraphic results for the late Neogene of central and eastern Crete show three episodes of basin extension following a period of approximately N–S compression. In the earliest Tortonian, N130E- to N100E-trending normal faults developed, resulting in a roughly planar, arc-parallel fault system aligning strongly asymmetric half-grabens. The early Tortonian to early Messinian period was characterized by an orthogonal fault system of N100E and N020E faults resulting in rectangular grabens and half-grabens. From the late Tortonian to early Pleistocene, deformation occurred along a pattern of closely spaced, left-lateral oblique N075E faults, orientated parallel to the south Cretan trenches. Deformation phases younger than early Pleistocene are dominated by normal to oblique faulting along WSW–ENE (N050E) faults and dextral, oblique motions along NNW–SSE (N160E) faults. Many faults that were generated during previous deformational episodes appear to be reactivated in later periods. Our tectonostratigraphy points to a three step anticlockwise rotation of active fault systems since the late middle Miocene compressional phase. We suggest here that the rotation is associated with a reorganization of the stress field going from SSW–NNE tension in the early late Miocene to NE–SW left-lateral shear in the Quaternary. The rotation is likely to be a response to arc-normal pull forces combined with a progressive increase of the curvature of the arc. During the Pliocene to Recent period, the SSW-ward retreat of the arc and trench system relative to the African plate was accomplished by transform motions in the eastern (Levantine) segment of the Hellenic Arc, resulting in, respectively, NNW–SSE and NE–SW left-lateral shear on Crete.     

Quantifying the contribution of tectonics vs. differential compaction in the development of domes along the Mid-Norwegian Atlantic margin

A sequential restoration based on combined backstripping and unfolding methods affords the opportunity to study the Cenozoic evolution of two low amplitude domes in the Mid‐Norwegian extensional margin, the Helland Hansen Arch and the Vema Dome. The integration of growth strata geometries observed in both flanks of the domes demonstrate that the structures grew by a variable combination of tectonics and differential compaction mechanisms. Sequential restoration shows that the Helland Hansen Arch grew between Early Oligocene and earliest Late Pliocene times (33–1.9 Ma). During the first phase of growth (33–9 Ma), the tectonic compression accounted for a minimum of 27% of the total dome amplitude. During Late Miocene to Pliocene times (9–1.9 Ma), differential compaction was the mechanism for dome growth. During Late Pliocene times, the Helland Hansen Arch grew with the highest rates coinciding with initial deposition of prograding wedges (3.6–1.9 Ma). In contrast, the Vema Dome started to develop in Early Eocene times and grew at a fairly constant rate up to Early Pliocene times at 3.6 Ma. The amplification of the Vema Dome took place through both differential compaction and tectonics between Early Eocene and Late Miocene times (54.8–7 Ma). The tectonic contribution accounted for a minimum of a 37% of the total dome amplitude. During Pleistocene times, the progradation of clastic wedges led to a decrease of the amplitudes of both the Helland Hansen Arch and the Vema Dome. The different timing of tectonic growth for analysed domes and arches suggest that a small and protracted phase of compression affected the Mid‐Norwegian Margin. This agrees with well‐known widespread contractional deformation affecting the Atlantic Margin of the European Plate during the Tertiary.     

Stratigraphy and 40Ar/39Ar geochronology of the Santa Rosa basin,Baja California: Dynamic evolution of a constrictional rift basin during oblique extension in the Gulf of California

The Santa Rosa basin of northeastern Baja California is one of several transtensional basins that formed during Neogene oblique opening of the Gulf of California. The basin comprises Late Miocene to Pleistocene sedimentary and volcanic strata that define an asymmetric half‐graben above the Santa Rosa detachment, a low‐angle normal fault with ca. 4–5 km of SE‐directed displacement. Stratigraphic analysis reveals systematic basin‐scale facies variations both parallel and across the basin. The basin‐fill exhibits an overall fining‐upward cycle, from conglomerate and breccia at the base to alternating sandstone‐mudstone in the depocentre, which interfingers with the fault‐scarp facies of the detachment. Sediment dispersal was transverse‐dominated and occurred through coalescing alluvial fans from the immediate hanging wall and/or footwall of the detachment. Different stratigraphic sections reveal important lateral facies variations that correlate with major corrugations of the detachment fault. The latter represent extension‐parallel folds that formed largely in response to the ca. N‐S constrictional strain regime of the transtensional plate boundary. The upward vertical deflection associated with antiformal folding dampened subsidence in the northeastern Santa Rosa basin, and resulted in steep topographic gradients with a high influx of coarse conglomerate here. By contrast, the downward motion in the synform hinge resulted in increased subsidence, and led to a southwestward migration of the depocentre with time. Thus, the Santa Rosa basin represents a new type of transtensional rift basin in which oblique extension is partitioned between diffuse constriction and discrete normal faulting. ⁴⁰Ar/³⁹Ar geochronology of intercalated volcanic rocks suggests that transtensional deformation began during the Late Miocene, between 9.36 ± 0.14 Ma and 6.78 ± 0.12 Ma, and confirms previous results from low‐temperature thermochronology (Seiler et al., 2011). Two other volcanic units that appear to be part of a conformable syn‐rift sequence are, in fact, duplicates of pre‐rift volcanics and represent allochthonous, gravity‐driven slide blocks that originated from the hanging wall.     

The tectono‐sedimentary evolution of a supra‐detachment rift basin at a deep‐water magma‐poor rifted margin: the example of the Samedan Basin preserved in the Err nappe in SE Switzerland

We describe the tectono‐sedimentary evolution of a Middle Jurassic, rift‐related supra‐detachment basin of the ancient Alpine Tethys margin exposed in the Central Alps (SE Switzerland). Based on pre‐Alpine restoration, we demonstrate that the rift basin developed over a detachment system that is traced over more than 40 km from thinned continental crust to exhumed mantle. The detachment faults are overlain by extensional allochthons consisting of upper crustal rocks and pre‐rift sediments up to several kilometres long and several hundreds of metres thick, compartmentalizing the distal margin into sub‐basins. We mapped and restored one of these sub‐basins, the Samedan Basin. It consists of a V‐shape geometry in map view, which is confined by extensional allochthons and floored by a detachment fault. It can be restored over a minimum distance of 11 km along and about 4 km perpendicular to the basin axis. Its sedimentary infill can be subdivided into basal (initial), intermediate (widening) and top (post‐tectonic) facies tracts. These tracts document (1) formation of the basin initially bounded by high‐angle faults and developing into low‐angle detachment faults, (2) widening of the basin and (3) migration of deformation further outboard. The basal facies tract is made of locally derived, poorly sorted gravity flow deposits that show a progressive change from hangingwall to footwall‐derived lithologies. Upsection the sediments develop into turbidity current deposits that show retrogradation (intermediate facies tract) and starvation of the sedimentary system (post‐tectonic facies tract). On the scale of the distal margin, the syn‐tectonic record documents a thinning‐ and fining‐upward sequence related to the back stepping of the tectonically derived sediment source, progressive starvation of the sedimentary system and migration of deformation resulting in exhumation and progressive delamination of the thinned crust during final rifting. This study provides valuable insights into the tectono‐sedimentary evolution and stratigraphic architecture of a supra‐detachment basin formed over hyper‐extended crust.     

Tectonic implications of transtensional supradetachment basin development in an extension‐parallel transfer zone: the Kocaçay Basin,western Anatolia,Turkey

The Kocaçay Basin (KÇB) is a key area in western Anatolia – a well‐known extended terrane where regional segmentation has received limited attention – for investigating strike‐slip faults kinematically linked to detachment faults. In this paper, we present results of an integrated sedimentologic, stratigraphic, and structural study of Miocene alluvial fan/fan‐delta/lacustrine deposits that accumulated in the KÇB, a NE‐trending basin with connections to the Menderes Metamorphic Core Complex (MCC). We mapped and evaluated most of the key faults in the KÇB, many for the first time, and recognised different deformation events in the study area near the E margin of the MCC. We also present field evidence for kinematic connections between low‐angle normal and strike‐slip faults which were developed in an intermittently active basement‐involved transfer zone in western Anatolia. We find that the KÇB contains a detailed record of Miocene transtensional sedimentation and volcanism that accompanied exhumation of the MCC. Structural data reveal that the basin was initially formed by transtension (D1 phase) and subsequently uplifted and deformed, probably as a result of early Pliocene wrench‐ to extension‐dominated deformation (D2 phase) overprinted by Plio‐Quaternary extensional tectonics (D3 phase). These results are consistent with progressive deformation wherein the axis of maximum extension remained in the horizontal plane but the intermediate and maximum shortening axes switched position in the vertical plane. Combining our results with published studies, we propose a new working hypothesis that the KÇB was a transtensional supradetachment basin during the Miocene. The hypothesis could provide new insights into intermittently active extension‐parallel zone of weakness in western Anatolia.These results also suggest that the termination of low‐angle normal fault systems within an extension parallel transfer zone may have resulted in a transtensional depressions which are different from classical supradetachment basins with respect to the sedimentation and deformational pattern of the basin infills.     

Tectonic controls on Miocene sedimentation in the Southern Taranaki Basin and implications for New Zealand plate boundary deformation

Miocene strata in the southern Taranaki Basin (STB), up to 3 km thick, provide a distal record of erosion associated with plate boundary deformation in New Zealand. 2D and 3D seismic reflection data tied to drillhole stratigraphy have been used to constrain four main phases of basin development. These are: (a) Early Miocene (22–19 Ma) subsidence, dominantly bathyal water depths and deposition of minor submarine fans along the eastern basin margin. (b) Middle Miocene (19–14 Ma) widespread submarine fan deposition on a bathyal basin floor in the central STB. (c) Rapid Middle–Late Miocene (14–7 Ma) progradation of the shelf break northwards across the STB. (d) Widespread uplift and erosion of the STB during the latest Miocene–Pliocene (7–4.5 Ma). Bathyal water depths and fan deposition in the Early Miocene were influenced by vertical motions on major reverse faults and regional subsidence produced by subduction of the Pacific plate beneath northern New Zealand. Subsequent submarine fan deposition and northward shelf‐break progradation reflect increasing input of terrigenous material, primarily eroded from an uplifting region to the south of the STB. Sedimentation patterns in the STB are consistent with the age and locations of conglomerates deposited in onshore West Coast basins, related to this uplift and erosion. Sediment transport in the West Coast region was mainly parallel to NNE trending active reverse faults, and in the STB was perpendicular to the NE‐SW orientated shelf break, especially from ca. 14–7 Ma, when sedimentation rates exceeded fault‐displacement rates. Increases in sedimentation rates in the STB coincide with regional increases in the rates of shortening that appear to reflect plate boundary‐wide events and have been attributed to, or correlated with, increases in the plate convergence rate. Miocene sedimentation patterns in the STB thus reflect both intra‐basinal deformation and tectonic signals from the wider developing New Zealand plate boundary.     

Constraining provenance,thickness and erosion of nappes using low‐temperature thermochronology: the Northland Allochthon,New Zealand

The Northland Allochthon, an assemblage of Cretaceous–Oligocene sedimentary rocks, was emplaced during the Late Oligocene–earliest Miocene, onto the in situ Mesozoic and early Cenozoic rocks (predominantly Late Eocene–earliest Miocene) in northwestern New Zealand. Using low‐temperature thermochronology, we investigate the sedimentary provenance, burial and erosion histories of the rocks from both the hanging and footwalls of the allochthon. In central Northland (Parua Bay), both the overlying allochthon and underlying Early Miocene autochthon yield detrital zircon and partially reset apatite fission‐track ages that were sourced from the local Jurassic terrane and perhaps Late Cretaceous volcanics; the autochthon contains, additionally, material sourced from Oligocene volcanics. Thermal history modelling indicates that the lower part of the allochthon together with the autochthon was heated to ca. 55–100°C during the Late Oligocene and Early Miocene, most likely due to the burial beneath the overlying nappe sequences. From the Mesozoic basement exposed in eastern Northland, we obtained zircon fission‐track ages tightly bracketed between 153 and 149 Ma; the apatite fission‐track ages on the other hand, generally young towards the northwest, from 129 to 20.9 Ma. Basement thermochronological ages are inverted to simulate the emplacement and later erosion of the Northland Allochthon, using a thermo‐kinematic model coupled with an inversion algorithm. The results suggest that during the Late Oligocene, the nappes in eastern Northland ranged from ca. 4–6‐km thick in the north to zero in the Auckland region (over a distance >200 km). Following the allochthon emplacement, eastern Northland was uplifted and unroofed during the Early Miocene for a period of ca. 1–6 Myr at the rate of 0.1–0.8 km/Myr, leading to rapid erosion of the nappes. Since Middle Miocene, the basement uplift ceased and the erosion of the nappes and the region as a whole slowed down (ca. 0–0.2 km/Myr), implying a decay in the tectonic activity in this region.     

Evolution of a large Miocene growth structure in the upper plate of the Whipple detachment fault, northeastern Whipple Mountains, California

Miocene sedimentary and volcanic rocks in the north-eastern Whipple Mountains, California, and the north-western Aubrey Hills, Arizona, accumulated in the upper plate of the Whipple detachment fault during regional extension and slip on the detachment. Miocene rocks in this area can be divided into three sequences: (1) pre-18.5-Ma dominantly volcanic rocks; (2) the 18.5-Ma Peach Springs Tuff; and (3) post-18.5-Ma dominantly sedimentary rocks. Important stratigraphic markers in sequence 3 include a 100- to 14–0-m-thick basalt unit and the voluminous War Eagle landslide, both of which correlate across Lake Havasu from the north-east Whipple Mountains to the Aurbrey Hills. We divide clastic sedimentary rocks of sequence 3 into three informal members: (3a) conglomerate and sandstone stratigraphically beneath the basalt; (3b) conglomerate and sandstone above the basalt and below the War Eagle landslide; and (3c) conglomerate and sandstone that overlie the War Eagle landslide. Detailed stratigraphic analysis and field mapping reveal dramatic south-westward thickening of member 3b strata, from about 50 m in the Aubrey Hills to over 1500 m in the north-east Whipple Mountains. In the north-east Whipple Mountains, this thick dipping section is overlain by the War Eagle landslide along a major angular unconformity; in the Aubrey Hills the base of the War Eagle landslide is roughly parallel to bedding dips of underlying strata. The above stratigraphic relationships can be explained by syndepositional growth of a rollover monocline by progressive tilting of the hangingwall above a master listric normal fault (Whipple detachment fault). This phase of upper-plate deformation began shortly after deposition of the basalt and ended prior to emplacement of the War Eagle landslide. Interbedded breccias low in member 3b, about 100 m above the basalt, record the first appearance of mylonitic detritus in the section. Growth of this upper-plate rollover was thus initiated at about the same time (shortly after deposition of the basalt) that the lower plate of the Whipple detachment fault was first exposed at the earth's surface by tectonic denudation and large-scale crustal uplift. These events are interpreted to record initiation of a secondary breakaway fault on the north-east flank of the growing Whipple detachment dome shortly after deposition of the basalt at about 14.5 (±1.0) Ma.     

Magnetochronology of synorogenic Miocene foreland sediments in the Fars arc of the Zagros Folded Belt (SW Iran)

The timing of deformation in the northern Zagros Folded Belt is poorly constrained because of the lack of an accurate absolute chronology of the syntectonic sedimentary sequences. The foreland basin infill in the northern part of the Fars arc is composed of supratidal sabkha deposits (Razak Fm), medium‐grained deltaic deposits (Agha Jari Fm) and coarse conglomerates of nearshore fan delta deposits at the base (Bakhtyari Fm, Bk1) and continental alluvial deposits at the top of the section (Bakhtyari Fm, Bk2). A magnetostratigraphic study was carried out in a composite section spanning about 1300 m on the northern flank of the Chahar–Makan syncline. Magnetostratigraphic correlation of the Razak Fm with chron C6n yields an age of 19.7 Ma at the base of the composite section. The transition to Agha Jari Fm is correlated with chron C5Cn, yielding an age of 16.6 Ma. The transition to the conglomerates of the Bakhtyari Fm (Bk1) correlates with the chron C5AD at approximately 14.8 Ma, which is considerably older than previously thought. The base of the Bakhtyari Fm growth strata, and thus the beginning of the deformation in northern Fars, is dated at 14–15 Ma. The topmost preserved Bakhtyari Fm (Bk1) is folded and unconformably overlain by Bakhtyari Fm (Bk2) conglomerates. This indicates that tectonic deformation in northern Zagros was already underway in the Middle Miocene.