Vent fluid chemistry of the Rainbow hydrothermal system (36°N, MAR): Phase equilibria and in situ pH controls on subseafloor alteration processes

The Rainbow hydrothermal field is located at 36°13.8′N-33°54.15′W at 2300 m depth on the western flank of a non-volcanic ridge between the South AMAR and AMAR segments of the Mid-Atlantic Ridge. The hydrothermal field consists of 10-15 active chimneys that emit high-temperature (∼365 °C) fluid. In July 2008, vent fluids were sampled during cruise KNOX18RR, providing a rich dataset that extends in time information on subseafloor chemical and physical processes controlling vent fluid chemistry at Rainbow. Data suggest that the Mg concentration of the hydrothermal end-member is not zero, but rather 1.5-2 mmol/kg. This surprising result may be caused by a combination of factors including moderately low dissolved silica, low pH, and elevated chloride of the hydrothermal fluid. Combining end-member Mg data with analogous data for dissolved Fe, Si, Al, Ca, and H₂, permits calculation of mineral saturation states for minerals thought appropriate for ultramafic-hosted hydrothermal systems at temperatures and pressures in keeping with constraints imposed by field observations. These data indicate that chlorite solid solution, talc, and magnetite achieve saturation in Rainbow vent fluid at a similar pH_(T,P) (400 °C, 500 bar) of approximately 4.95, while higher pH values are indicated for serpentine, suggesting that serpentine may not coexist with the former assemblage at depth at Rainbow. The high Fe/Mg ratio of the Rainbow vent fluid notwithstanding, the mole fraction of clinochlore and chamosite components of chlorite solid solution at depth are predicted to be 0.78 and 0.22, respectively. In situ pH measurements made at Rainbow vents are in good agreement with pH_(T,P) values estimated from mineral solubility calculations, when the in situ pH data are adjusted for temperature and pressure. Calculations further indicate that pH_(T,P) and dissolved H₂ are extremely sensitive to changes in dissolved silica owing to constraints imposed by chlorite solid solution-fluid equilibria. Indeed, the predicted correlation between dissolved silica and H₂ defines a trend that is in good agreement with vent fluid data from Rainbow and other high-temperature ultramafic-hosted hydrothermal systems. We speculate that the moderate concentrations of dissolved silica in vent fluids from these systems result from hydrothermal alteration of plagioclase and olivine in the form of subsurface gabbroic intrusions, which, in turn are variably replaced by chlorite + magnetite + talc ± tremolite, with important implications for pH lowering, dissolved sulfide concentrations, and metal mobility.     

Low temperature volatile production at the Lost City Hydrothermal Field, evidence from a hydrogen stable isotope geothermometer

Although commonly utilized in continental geothermal work, the water-hydrogen and methane-hydrogen isotope geothermometers have been neglected in hydrothermal studies. Here we report δD-CH₄ and δD-H₂ values from high-temperature, black smoker-type hydrothermal vents and low-temperature carbonate-hosted samples from the recently discovered Lost City Hydrothermal Field. Methane deuterium content is uniform across the dataset at − 120 ± 12‰. Hydrogen δD values vary from − 420‰ to − 330‰ at high-temperature vents to − 700‰ to − 600‰ at Lost City. The application of several geothermometer equations to a suite of hydrothermal vent volatile samples reveals that predicted temperatures are similar to measured vent temperatures at high-temperature vents, and 20-60 °C higher than those measured at the Lost City vents. We conclude that the overestimation of temperature at Lost City reflects 1) that methane and hydrogen are produced by serpentinization at > 110 °C, and 2) that isotopic equilibrium at temperatures < 70 °C is mediated by microbial sulfate reduction. The successful application of hydrogen isotope geothermometers to low-temperature Lost City hydrothermal samples encourages its employment with low-temperature diffuse hydrothermal fluids.     

Speciation and thermodynamic properties for cobalt chloride complexes in hydrothermal fluids at 35-440 °C and 600 bar: An in-situ XAS study

Aqueous Co(II) chloride complexes play a crucial role in cobalt transport and deposition in ore-forming hydrothermal systems, ore processing plants, and in the corrosion of special Co-bearing alloys. Reactive transport modelling of cobalt in hydrothermal fluids relies on the availability of thermodynamic properties for Co complexes over a wide range of temperature, pressure and salinity. Synchrotron X-ray absorption spectroscopy was used to determine the speciation of cobalt(II) in 0-6 m chloride solutions at temperatures between 35 and 440 °C at a constant pressure of 600 bar. Qualitative analysis of XANES spectra shows that octahedral species predominate in solution at 35 °C, while tetrahedral species become increasingly important with increasing temperature. Ab initio XANES calculations and EXAFS analyses suggest that in high temperature solutions the main species at high salinity (Cl:Co >> 2) is CoCl₄²⁻, while a lower order tetrahedral complex, most likely CoCl₂(H₂O)_2(aq), predominates at low salinity (Cl:Co ratios ∼2). EXAFS analyses further revealed the bonding distances for the octahedral Co(H₂O)₆²⁺ (^octCo-O = 2.075(19) Å), tetrahedral CoCl₄²⁻ (^tetCo-Cl = 2.252(19) Å) and tetrahedral CoCl₂(H₂O)_2(aq) (^tetCo-O = 2.038(54) Å and ^tetCo-Cl = 2.210(56) Å). An analysis of the Co(II) speciation in sodium bromide solutions shows a similar trend, with tetrahedral bromide complexes becoming predominant at higher temperature/salinity than in the chloride system. EXAFS analysis confirms that the limiting complex at high bromide concentration at high temperature is CoBr₄²⁻. Finally, XANES spectra were used to derive the thermodynamic properties for the CoCl₄²⁻ and CoCl₂(H₂O)_2(aq) complexes, enabling thermodynamic modelling of cobalt transport in hydrothermal fluids. Solubility calculations show that tetrahedral CoCl₄²⁻ is responsible for transport of cobalt in hydrothermal solutions with moderate chloride concentration (∼2 m NaCl) at temperatures of 250 °C and higher, and both cooling and dilution processes can cause deposition of cobalt from hydrothermal fluids.     

Dissolved organic carbon in ridge-axis and ridge-flank hydrothermal systems

The circulation of hydrothermal fluid through the upper oceanic crustal reservoir has a large impact on the chemistry of seawater, yet the impact on dissolved organic carbon (DOC) in the ocean has received almost no attention. To determine whether hydrothermal circulation is a source or a sink for DOC in the oceans, we measured DOC concentrations in hydrothermal fluids from several environments. Hydrothermal fluids were collected from high-temperature vents and diffuse, low-temperature vents on the basalt-hosted Juan de Fuca Ridge axis and also from low-temperature vents on the sedimented eastern flanks. High-temperature fluids from Main Endeavour Field (MEF) and Axial Volcano (AV) contain very low DOC concentrations (average = 15 and 17 μM, respectively) compared to background seawater (36 μM). At MEF and AV, average DOC concentrations in diffuse fluids (47 and 48 μM, respectively) were elevated over background seawater, and high DOC is correlated with high microbial cell counts in diffuse fluids. Fluids from off-axis hydrothermal systems located on 3.5-Ma-old crust at Baby Bare Seamount and Ocean Drilling Program (ODP) Hole 1026B had average DOC concentrations of 11 and 13 μM, respectively, and lowered DOC was correlated with low cell counts. The relative importance of heterotrophic uptake, abiotic sorption to mineral surfaces, thermal decomposition, and microbial production in fixing the DOC concentration in vent fluids remains uncertain. We calculated the potential effect of hydrothermal circulation on the deep-sea DOC cycle using our concentration data and published water flux estimates. Maximum calculated fluxes of DOC are minor compared to most oceanic DOC source and sink terms.     

Geochemistry of low-molecular weight hydrocarbons in hydrothermal fluids from Middle Valley, northern Juan de Fuca Ridge

Hydrothermal vent fluids from Middle Valley, a sediment-covered vent field located on the northern Juan de Fuca Ridge, were sampled in July, 2000. Eight different vents with exit temperatures of 186-281 °C were sampled from two areas of venting: the Dead Dog and ODP Mound fields. Fluids from the Dead Dog field are characterized by higher concentrations of ΣNH₃ and organic compounds (C₁-C₄ alkanes, ethene, propene, benzene and toluene) compared with fluids from the ODP Mound field. The ODP Mound fluids, however, are characterized by higher C₁/(C₂ + C₃) and benzene:toluene ratios than those from the Dead Dog field. The aqueous organic compounds in these fluids have been derived from both bacterial processes (methanogenesis in low temperature regions during recharge) as well as from thermogenic processes in higher temperature portions of the subsurface reaction zone. As the sediments undergo hydrothermal alteration, carbon dioxide and hydrocarbons are released to solution as organic matter degrades via a stepwise oxidation process. Compositional and isotopic differences in the aqueous hydrocarbons indicate that maximum subsurface temperatures at the ODP Mound are greater than those at the Dead Dog field. Maximum subsurface temperatures were calculated assuming that thermodynamic equilibrium is attained between alkenes and alkanes, benzene and toluene, and carbon dioxide and methane. The calculated temperatures for alkene-alkane equilibrium are consistent with differences in the dissolved Cl concentrations in fluids from the two fields, and confirm that subsurface temperatures at the ODP Mound are hotter than those at the Dead Dog field. Temperatures calculated assuming benzene-toluene equilibrium and carbon dioxide-methane equilibrium are similar to observed exit temperatures, and do not record the hottest subsurface conditions. The difference in subsurface temperatures estimated using organic geochemical thermometers reflects subsurface cooling processes via mixing of a hot, low salinity vapor with a cooler, seawater salinity fluid. Because of the disparate temperature dependence of alkene-alkane and benzene-toluene equilibria, the mixed fluid records both the high and low temperature equilibrium conditions. These calculations indicate that vapor-rich fluids are presently being formed in the crust beneath the ODP Mound, yet do not reach the surface due to mixing with the lower temperature fluids.     

Geochemistry and morphology of metalliferous sediments and oxyhydroxides from the Endeavour segment, Juan de Fuca Ridge

We present first data on the geochemistry, mineralogy and morphology of near-vent sediments (35 and 200 m from active vent) and ridge flank sediments (approximately 3 km from the vent field) as well as oxyhydroxide deposits from the Endeavour segment, Juan de Fuca Ridge. The purpose of the study was to understand better the origin and characteristic features of metalliferous sediments associated with base and precious metal massive sulfides in volcanic terrains. Hydrothermal components in sediments are Fe-Si ± S-rich and Mn-Fe-Si-rich phases, sulfides and barite, which were exclusively derived from plume fallout. Sulfides are only a minor constituent of near-vent sediments (2-4 wt%) and were not detected in ridge flank sediments. The study suggests that the distribution of hydrothermal phases and associated elements in near-vent and ridge flank sediments is affected mainly by processes of agglomeration, dissolution, absorption and settling that take place within a plume and to a lesser extent post-depositional processes. Rapid deposition of sulfides in the vicinity of the vents is reflected in a sharp drop of the Cu concentrations in sediments with increasing distance from the vents. Besides sulfides, important carriers of Pb, Cu, Zn and Co in near-vent sediments are Fe-Mn oxyhydroxides that occur together with silica as aggregates of gel-like material and flaky particles and as coatings on filaments. Away from the vents, trace metals are mostly in Fe-Mn oxyhydroxides and authigenic Fe-rich montmorillonite. Oxyhydroxides at the Main Endeavour field are interpreted to have originated from oxidation of mound sulfides accompanied by precipitation of primary Fe-oxyhydroxide + silica from low-temperature fluids. At the Mothra field, seafloor deposits and chimney crusts composed of Fe-oxyhydroxide ± Mn + silica are considered to be direct precipitates from hydrothermal fluids that have been less diluted with seawater. Oxyhydroxide deposits exhibit unique microtextures that resemble mineralized microorganisms and may indicate existence of diverse microbial communities.     

A new Fe/Mn geothermometer for hydrothermal systems: Implications for high-salinity fluids at 13°N on the East Pacific Rise

Field and experimental investigations demonstrate the chemistry of mid-ocean ridge hydrothermal vent fluids reflects fluid-mineral reaction at higher temperatures than those typically measured at the seafloor. To account for this and, in turn, be able to better constrain sub-seafloor hydrothermal processes, we have developed an empirical geothermometer based on the dissolved Fe/Mn ratio in high-temperature fluids. Using data from basalt alteration experiments, the relationship; T (°C) = 331.24 + 112.41*log[Fe/Mn] has been calibrated between 350 and 450 °C. The apparent Fe-Mn equilibrium demonstrated by the experimental data is in good agreement with natural vent fluids, suggesting broad applicability. When used in conjunction with constraints imposed by quartz solubility, associated sub-seafloor pressures can be estimated for basalt-hosted systems. As an example, this methodology is used to interpret new data from 13°N on the East Pacific Rise, where high-temperature fluids both enriched and depleted in chloride (339-646 mmol/kg), relative to seawater, are actively venting within a close proximity. Accounting for these variable salinities, active phase separation is clearly taking place at 13°N, yet the fluid Fe/Mn ratios and the silica concentrations suggest equilibration at temperatures less than those coinciding with the two-phase region. These data show the chloride-enriched fluid reflects the highest temperature and pressure (∼432 °C, 400 bars) of equilibration, consistent with circulation near the top of the inferred magma chamber. This is in agreement with the elevated CO₂ concentration relative to the chloride-depleted fluids. The noted temperature derived from the Fe/Mn geothermometer is higher than the critical temperature for a fluid of equivalent salinity. This carries the important implication that, despite being chloride-enriched relative to seawater, these fluids evolved as the vapor component of even higher salinity brine.     

Geochemistry of hydrothermal fluids from the PACMANUS, Northeast Pual and Vienna Woods hydrothermal fields, Manus Basin, Papua New Guinea

Processes controlling the composition of seafloor hydrothermal fluids in silicic back-arc or near-arc crustal settings remain poorly constrained despite growing evidence for extensive magmatic-hydrothermal activity in such environments. We conducted a survey of vent fluid compositions from two contrasting sites in the Manus back-arc basin, Papua New Guinea, to examine the influence of variations in host rock composition and magmatic inputs (both a function of arc proximity) on hydrothermal fluid chemistry. Fluid samples were collected from felsic-hosted hydrothermal vent fields located on Pual Ridge (PACMANUS and Northeast (NE) Pual) near the active New Britain Arc and a basalt-hosted vent field (Vienna Woods) located farther from the arc on the Manus Spreading Center. Vienna Woods fluids were characterized by relatively uniform endmember temperatures (273-285 °C) and major element compositions, low dissolved CO₂ concentrations (4.4 mmol/kg) and high measured pH (4.2-4.9 at 25 °C). Temperatures and compositions were highly variable at PACMANUS/NE Pual and a large, newly discovered vent area (Fenway) was observed to be vigorously venting boiling (358 °C) fluid. All PACMANUS fluids are characterized by negative δD_H2O values, in contrast to positive values at Vienna Woods, suggesting substantial magmatic water input to circulating fluids at Pual Ridge. Low measured pH (25 °C) values (∼2.6-2.7), high endmember CO₂ (up to 274 mmol/kg) and negative δ³⁴S_H2S values (down to −2.7‰) in some vent fluids are also consistent with degassing of acid-volatile species from evolved magma. Dissolved CO₂ at PACMANUS is more enriched in ¹³C (−4.1‰ to −2.3‰) than Vienna Woods (−5.2‰ to −5.7‰), suggesting a contribution of slab-derived carbon. The mobile elements (e.g. Li, K, Rb, Cs and B) are also greatly enriched in PACMANUS fluids reflecting increased abundances in the crust there relative to the Manus Spreading Center. Variations in alkali and dissolved gas abundances with Cl at PACMANUS and NE Pual suggest that phase separation has affected fluid chemistry despite the low temperatures of many vents. In further contrast to Vienna Woods, substantial modification of PACMANUS/NE Pual fluids has taken place as a result of seawater ingress into the upflow zone. Consistently high measured Mg concentrations as well as trends of increasingly non-conservative SO₄ behavior, decreasing endmember Ca/Cl and Sr/Cl ratios with increased Mg indicate extensive subsurface anhydrite deposition is occurring as a result of subsurface seawater entrainment. Decreased pH and endmember Fe/Mn ratios in higher Mg fluids indicate that the associated mixing/cooling gives rise to sulfide deposition and secondary acidity production. Several low temperature (?80 °C) fluids at PACMANUS/NE Pual also show evidence for anhydrite dissolution and water-rock interaction (fixation of B) subsequent to seawater entrainment. Hence, the evolution of fluid compositions at Pual Ridge reflects the cumulative effects of water/rock interaction, admixing and reaction of fluids exsolved from silicic magma, phase separation/segregation and seawater ingress into upflow zones.     

Quartz solubility in the two-phase and critical region of the NaCl-KCl-H2O system: Implications for submarine hydrothermal vent systems at 9°50′N East Pacific Rise

Experiments were performed to investigate quartz solubility in Cl-bearing aqueous solutions at temperature (365-430 °C) and pressure conditions (219-381 bars) near and within the two-phase region of the NaCl-KCl-H₂O system. Dissolved SiO₂ concentrations increased with pressure along a given isotherm, although the magnitude of this decreased with increasing proximity to the two-phase boundary. Upon intersection of the two-phase boundary, however, significant concentrations of dissolved SiO₂ characterized vapor-rich fluids at both subcritical and supercritical conditions. For these fluids, dissolved silica concentrations ranged from 2.81 to 14.6 mmolal, increasing with dissolved chloride concentration. The experimental data permit regression of a density-based relationship, taking account of non-ideal activity-concentration effects, which can be used to better constrain temperatures and pressures from dissolved SiO₂ and chloride in high temperature vent fluids at mid-ocean ridges. Accordingly, pressure and temperature conditions in subseafloor hydrothermal reaction zones at 9°50′N East Pacific Rise (EPR) were estimated applying data from this experimental study to interval (1991-2002) and new field data (2004). Results indicate reaction zone at conditions ranging from 420 to 430 °C at 600 to 1500 m below seafloor. Thus, conditions predicted for 9°50′N East Pacific Rise (EPR) vent fluids suggest that supercritical phase separation might be more common than previously thought.     

Formation of Fe-Mn-Si oxide and nontronite deposits in hydrothermal fields on the Valu Fa Ridge, Lau Basin

Hydrothermal Fe-Mn-Si oxides and nontronite are pervasive in the Hine Hina, Vai Lili and Mariner hydrothermal fields along the central Valu Fa Ridge, Lau Basin. Morphometric and mineralogical analyses reveal that the iron-rich filaments are the most important constituents of these Fe-Mn-Si oxide deposits. Both the morphologies and chemical composition of the filaments indicate that neutrophilic Fe-oxidizing bacteria have played a key role in the formation of these deposits. A key process of the formation of these deposits is the creation of a complicated filamentous network in which a series of metabolic activities and passive sorption and nucleation processes occur. The precipitation of dissolved Si in unsaturated and saturated states leads to a “two-generation” growth model in the hydrothermal vents. The precipitation of amorphous opal occurs in a relatively narrow temperature range (41.1-42.9 °C) based on oxygen isotope analyses, indicating a fast precipitation rate of opal-A when conductive cooling of the hydrothermal fluid occurrs. Patchy nontronite in the Mariner fields is a product of the direct precipitation from hydrothermal fluids at a temperature of ∼87.9 °C, whereas the scattered nontronite at the Hine Hina field is the product of the replacement of hydrothermal Fe-Si oxides at a temperature of ∼46.2 °C.     

Stable isotopic evidence in support of active microbial methane cycling in low-temperature diffuse flow vents at 9°50′N East Pacific Rise

A unique dataset from paired low- and high-temperature vents at 9°50′N East Pacific Rise provides insight into the microbiological activity in low-temperature diffuse fluids. The stable carbon isotopic composition of CH₄ and CO₂ in 9°50′N hydrothermal fluids indicates microbial methane production, perhaps coupled with microbial methane consumption. Diffuse fluids are depleted in ¹³C by ∼10‰ in values of δ¹³C of CH₄, and by ∼0.55‰ in values of δ¹³C of CO₂, relative to the values of the high-temperature source fluid (δ¹³C of CH₄ =−20.1 ± 1.2‰, δ¹³C of CO₂ =−4.08 ± 0.15‰). Mixing of seawater or thermogenic sources cannot account for the depletions in ¹³C of both CH₄ and CO₂ at diffuse vents relative to adjacent high-temperature vents. The substrate utilization and ¹³C fractionation associated with the microbiological processes of methanogenesis and methane oxidation can explain observed steady-state CH₄ and CO₂ concentrations and carbon isotopic compositions. A mass-isotope numerical box model of these paired vent systems is consistent with the hypothesis that microbial methane cycling is active at diffuse vents at 9°50′N. The detectable ¹³C modification of fluid geochemistry by microbial metabolisms may provide a useful tool for detecting active methanogenesis.     

Rare earth element abundances in hydrothermal fluids from the Manus Basin, Papua New Guinea: Indicators of sub-seafloor hydrothermal processes in back-arc basins

Rare earth element (REE) concentrations are reported for a large suite of seafloor vent fluids from four hydrothermal systems in the Manus back-arc basin (Vienna Woods, PACMANUS, DESMOS and SuSu Knolls vent areas). Sampled vent fluids show a wide range of absolute REE concentrations and chondrite-normalized (REE_N) distribution patterns (La_N/Sm_N ∼ 0.6-11; La_N/Yb_N ∼ 0.6 - 71; ). REE_N distribution patterns in different vent fluids range from light-REE enriched, to mid- and heavy-REE enriched, to flat, and have a range of positive Eu-anomalies. This heterogeneity contrasts markedly with relatively uniform REE_N distribution patterns of mid-ocean ridge hydrothermal fluids. In Manus Basin fluids, aqueous REE compositions do not inherit directly or show a clear relationship with the REE compositions of primary crustal rocks with which hydrothermal fluids interact. These results suggest that the REEs are less sensitive indicators of primary crustal rock composition despite crustal rocks being the dominant source of REEs in submarine hydrothermal fluids. In contrast, differences in aqueous REE compositions are consistently correlated with differences in fluid pH and ligand (chloride, fluoride and sulfate) concentrations. Our results suggest that the REEs can be used as an indicator of the type of magmatic acid volatile (i.e., presence of HF, SO₂) degassing in submarine hydrothermal systems. Additional fluid data suggest that near-seafloor mixing between high-temperature hydrothermal fluid and locally entrained seawater at many vent areas in the Manus Basin causes anhydrite precipitation. Anhydrite effectively incorporates REE and likely affects measured fluid REE concentrations, but does not affect their relative distributions.     

Enzymatic microbial Mn(II) oxidation and Mn biooxide production in the Guaymas Basin deep-sea hydrothermal plume

Microorganisms play important roles in mediating biogeochemical reactions in deep-sea hydrothermal plumes, but little is known regarding the mechanisms that underpin these transformations. At Guaymas Basin (GB) in the Gulf of California, hydrothermal vents inject fluids laden with dissolved Mn(II) (dMn) into the deep waters of the basin where it is oxidized and precipitated as particulate Mn(III/IV) oxides, forming turbid hydrothermal “clouds”. Previous studies have predicted extremely short residence times for dMn at GB and suggested they are the result of microbially-mediated Mn(II) oxidation and precipitation. Here we present biogeochemical results that support a central role for microorganisms in driving Mn(II) oxidation in the GB hydrothermal plume, with enzymes being the primary catalytic agent. dMn removal rates at GB are remarkably fast for a deep-sea hydrothermal plume (up to 2 nM/h). These rapid rates were only observed within the plume, not in background deep-sea water above the GB plume or at GB plume depths (∼1750-2000 m) in the neighboring Carmen Basin, where there is no known venting. dMn removal is dramatically inhibited under anoxic conditions and by the presence of the biological poison, sodium azide. A conspicuous temperature optimum of dMn removal rates (∼40 °C) and a saturation-like (i.e. Michaelis-Menten) response to O₂ concentration were observed, indicating an enzymatic mechanism. dMn removal was resistant to heat treatment used to select for spore-forming organisms, but very sensitive to low concentrations of added Cu, a cofactor required by the putative Mn(II)-oxidizing enzyme. Extended X-ray absorption fine structure spectroscopy (EXAFS) and synchrotron radiation-based X-ray diffraction (SR-XRD) revealed the Mn oxides to have a hexagonal birnessite or δ-MnO₂-like mineral structure, indicating that these freshly formed deep-sea Mn oxides are strikingly similar to primary biogenic Mn oxides produced by laboratory cultures of bacteria. Overall, these results reveal a vigorous Mn biogeochemical cycle in the GB hydrothermal plume, where a distinct microbial community enzymatically catalyzes rapid Mn(II) oxidation and the production of Mn biooxides.     

Insights into C and H storage in the altered oceanic crust: Results from ODP/IODP Hole 1256D

Carbon and hydrogen concentrations and isotopic compositions were measured in 19 samples from altered oceanic crust cored in ODP/IODP Hole 1256D through lavas, dikes down to the gabbroic rocks. Bulk water content varies from 0.32 to 2.14 wt% with δD values from −64‰ to −25‰. All samples are enriched in water relative to fresh basalts. The δD values are interpreted in terms of mixing between magmatic water and another source that can be either secondary hydrous minerals and/or H contained in organic compounds such as hydrocarbons. Total CO₂, extracted by step-heating technique, ranges between 564 and 2823 ppm with δ¹³C values from −14.9‰ to −26.6‰. As for water, these altered samples are enriched in carbon relative to fresh basalts. The carbon isotope compositions are interpreted in terms of a mixing between two components: (1) a carbonate with δ¹³C = −4.5‰ and (2) an organic compound with δ¹³C = −26.6‰. A mixing model calculation indicates that, for most samples (17 of 19), more than 75% of the total C occurs as organic compounds while carbonates represent less than 25%. This result is also supported by independent estimates of carbonate content from CO₂ yield after H₃PO₄ attack. A comparison between the carbon concentration in our samples, seawater DIC (Dissolved Inorganic Carbon) and DOC (Dissolved Organic Carbon), and hydrothermal fluids suggests that CO₂ degassed from magmatic reservoirs is the main source of organic C addition to the crust during the alteration process. A reduction step of dissolved CO₂ is thus required, and can be either biologically mediated or not. Abiotic processes are necessary for the deeper part of the crust (>1000 mbsf) because alteration temperatures are greater than any hyperthermophilic living organism (i.e. T > 110 °C). Even if not required, we cannot rule out the contribution of microbial activity in the low-temperature alteration zones. We propose a two-step model for carbon cycling during crustal alteration: (1) when “fresh” oceanic crust forms at or close to ridge axis, alteration starts with hot hydrothermal fluids enriched in magmatic CO₂, leading to the formation of organic compounds during Fischer-Tropsch-type reactions; (2) when the crust moves away from the ridge axis, these interactions with hot hydrothermal fluids decrease and are replaced by seawater interactions with carbonate precipitation in fractures. Taking into account this organic carbon, we estimate C isotope composition of mean altered oceanic crust at ∼ −4.7‰, similar to the δ¹³C of the C degassed from the mantle at ridge axis, and discuss the global carbon budget. The total flux of C stored in the altered oceanic crust, as carbonate and organic compound, is 2.9 ± 0.4 × 10¹² molC/yr.     

An experimental study of the solubility and speciation of neodymium (III) fluoride in F-bearing aqueous solutions

The solubility of neodymium (III) fluoride was investigated at temperatures of 150, 200 and 250 °C, saturated water vapor pressure, and a total fluoride concentration (HF°_aq + F⁻) ranging from 2.0 × 10⁻³ to 0.23 mol/l. The results of the experiments show that Nd³⁺ and NdF²⁺ are the dominant species in solution at the temperatures investigated and were used to derive formation constants for NdF²⁺ and a solubility product for NdF₃. The solubility product of NdF₃(logK_sp=loga_Nd³⁺+3loga_F^-) is −24.4 ± 0.2, −22.8 ± 0.1, and −21.5 ± 0.2 at 250, 200 and 150 °C, respectively, and the formation constant of NdF²⁺(logβ=loga_NdF²⁺-loga_Nd³⁺-loga_F^-) is 6.8 ± 0.1, 6.2 ± 0.1, and 5.5 ± 0.2 at 250, 200 and 150 °C, respectively. The results of this study show that published theoretical predictions significantly overestimate the stability of NdF²⁺ and the solubility of NdF₃.The potential impact of the results on natural systems was evaluated for a hypothetical fluid with a composition similar to that responsible for REE mineralization in the Capitan pluton, New Mexico. In contrast to results obtained using the theoretical predictions of Haas [Haas J. R., Shock E. L., and Sassani D. C. (1995) Rare earth elements in hydrothermal systems: estimates of standard partial molal thermodynamic properties of aqueous complexes of the rare earth elements at high pressures and temperatures. Geochim. Cosmochim. Acta59, 4329-4350.], which indicate that NdF²⁺ is the dominant species in solution, calculations employing the data presented in this paper and previously published experimental data for chloride and sulfate species [Migdisov A. A., and Williams-Jones A. E. (2002) A spectrophotometric study of neodymium(III) complexation in chloride solutions. Geochim. Cosmochim. Acta66, 4311-4323; Migdisov A. A., Reukov V. V., and Williams-Jones A. E. (2006) A spectrophotometric study of neodymium(III) complexation in sulfate solutions at elevated temperatures. Geochim. Cosmochim. Acta70, 983-992.] show that neodymium chloride species predominate and that neodymium fluoride species are relatively unimportant. This suggests that accepted models for REE deposits that invoke fluoride complexation as the method of hydrothermal REE transport may need to be re-evaluated.     

An experimental study of the solubility of molybdenum in H2O and KCl-H2O solutions from 500 °C to 800 °C, and 150 to 300 MPa

The solubility of molybdenum (Mo) was determined at temperatures from 500 °C to 800 °C and 150 to 300 MPa in KCl-H₂O and pure H₂O solutions in cold-seal experiments. The solutions were trapped as synthetic fluid inclusions in quartz at experimental conditions, and analyzed by laser ablation inductively coupled plasma mass spectrometry (LA ICPMS).Mo solubilities of 1.6 wt% in the case of KCl-bearing aqueous solutions and up to 0.8 wt% in pure H₂O were found. Mo solubility is temperature dependent, but not pressure dependent over the investigated range, and correlates positively with salinity (KCl concentration). Molar ratios of ∼1 for Mo/Cl and Mo/K are derived based on our data. In combination with results of synchrotron X-ray absorption spectroscopy of individual fluid inclusions, it is suggested that Mo-oxo-chloride complexes are present at high salinity (>20 wt% KCl) and ion pairs at moderate to low salinity (<11 wt% KCl) in KCl-H₂O aqueous solutions. Similarly, in the pure H₂O experiments molybdic acid is the dominant species in aqueous solution. The results of these hydrothermal Mo experiments fit with earlier studies conducted at lower temperatures and indicate that high Mo concentrations can be transported in aqueous solutions. Therefore, the Mo concentration in aqueous fluids seems not to be the limiting factor for ore formation, whereas precipitation processes and the availability of sulfur appear to be the main controlling factors in the formation of molybdenite (MoS₂).     

The Escanaba Trough, Gorda Ridge hydrothermal system: Temporal stability and subseafloor complexity

The composition and temperature of vent fluids sampled from the active hydrothermal system in Escanaba Trough, Gorda Ridge in 2000 and 2002 remain unchanged from the only time this field was previously sampled, in 1988. ODP Leg 169 drilled nine bore holes at this site in 1996, some within meters of the vents, yet this disturbance has not impacted the measured compositions or temperatures of the fluids exiting at the seafloor. The fluids have maximum measured temperatures of 218°C and contain ∼20% more chloride than local ambient seawater. Our interpretation is that the fluid compositions are generated by supercritical phase separation of seawater, with much of the water-rock reaction occurring within the ∼400m thick sedimentary section that overlies the basalt at this site. The ODP drilling results provide information on the mineralogy and composition of materials below the seafloor, as well as direct constraints not typically available on the physical conditions occurring below the seafloor hydrothermal system. Calculations utilizing geochemical modeling software suggest the fluids are close to saturation with a suite of minerals found subsurface, suggesting equilibrium between the fluids and substrate. These results provide an explanation for why the fluids have remained chemically stable for 14 yrs. The pore water data from drilling suggest that the hydrology and chemistry of the hydrothermal system are much more complex within the sediment cover than would be expected from the surface manifestations of the hydrothermal system. While the pore waters have chloride contents both greater and less than the local seawater, only fluids with higher chloride contents vent at the seafloor. Our calculations suggest that at the current conditions the “brines” (fluids with chlorinity greater than seawater) are actually less dense than the “vapors” (fluids with chlorinity less than seawater). These density relationships may provide an explanation for why the “brines” are now venting preferentially to the “vapors,” a situation opposite to what is usually observed or inferred.     

Mineralogical and geochemical characteristics of hydrothermal alteration of basalt in the Kuroko mine area, Japan: implications for the evolution of a Back Arc Basin hydrothermal system

Basalt in the Furutobe District of the Kuroko mine area in Japan is characterized by abundant chlorite and epidote. Fluid inclusion studies indicate that chlorite is formed at lower temperatures (230–250°C) than epidote (250–280°C). The seawater/basalt mass ratio for the early chlorite-rich alteration was high (max. 40), but that for the later alteration was low (0.1–1.8). The CaO, Na₂O and SiO₂ of the bulk rock correlate negatively with MgO, while FeO and Σ Fe correlate positively with MgO. These changes in the characteristic features of hydrothermal alteration from early to late are generally similar to those for a mid-ocean ridge geothermal system accompanying basalt alteration.The MgO/FeO ratios of chlorite and actinolite and the Fe₂O₃ concentration of epidote from the basalt are greater than those of mid-ocean ridge basalt probably owing to the differences in the Fe₂O₃/FeO and MgO/FeO ratios of the parent rocks. The lower CaO concentration and the higher Na₂O concentration of the bulk rock compared with altered mid-ocean ridge basalt can be interpreted in terms of the difference in original bulk rock compositions.The Furutobe basalt, as well as other submarine back arc basalts, contains more vesicles filled with hydrothermal minerals (epidote, calcite, quartz, chlorite, pyrite) than do the mid-ocean ridge basalts. The abundance of vesicles plays an important role in controlling the secondary mineralogy and geochemistry of hydrothermally altered submarine back arc basin basalts.     

Experimental investigation of single carbon compounds under hydrothermal conditions

The speciation of carbon in subseafloor hydrothermal systems has direct implications for the maintenance of life in present-day vent ecosystems and possibly the origin of life on early Earth. Carbon monoxide is of particular interest because it represents a key reactant during the abiotic synthesis of reduced carbon compounds via Fischer-Tropsch-type processes. Laboratory experiments were conducted to constrain reactions that regulate the speciation of aqueous single carbon species under hydrothermal conditions and determine kinetic parameters for the oxidation of CO according to the water water-gas shift reaction (CO₂ + H₂ = CO + H₂O). Aqueous fluids containing added CO₂, CO, HCOOH, NaHCO₃, NaHCOO, and H₂ were heated at 150, 200, and 300 °C and 350 bar in flexible-cell hydrothermal apparatus, and the abundances of carbon compounds was monitored as a function of time. Variations in fluid chemistry suggest that the reduction of CO₂ to CH₃OH under aqueous conditions occurs via a stepwise process that involves the formation of HCOOH, CO, and possibly CH₂O, as reaction intermediaries. Kinetic barriers that inhibit the reduction of CH₃OH to CH₄ allow the accumulation of reaction intermediaries in solution at high concentrations regulated by metastable thermodynamic equilibrium. Reaction of CO₂ to CO involves a two-step process in which CO₂ initially undergoes a reduction step to HCOOH which subsequently dehydrates to form CO. Both reactions proceed readily in either direction. A preexponential factor of 1.35 × 10⁶ s⁻¹ and an activation energy of 102 kJ/mol were retrieved from the experimental results for the oxidation of CO to CO₂. Reaction rates amongst single carbon compounds during the experiments suggest that ΣCO₂ (CO₂ + HCO₃⁻ + CO₃²⁻), CO, ΣHCOOH (HCOOH + HCOO⁻), and CH₃OH may reach states of redox-dependent metastable thermodynamic equilibrium in subseafloor and other hydrothermal systems. The abundance of CO under equilibrium conditions is strongly dependent on temperature, the total carbon content of the fluid, and host-rock lithology. If crustal residence times following the mixing of high-temperature hydrothermal fluids with cool seawater are sufficiently long, reequilibration of aqueous carbon can result in the generation of additional reduced carbon species such as HCOOH and CH₃OH, and the consumption of H₂. The present study suggests that abiotic reactions involving aqueous carbon compounds in hydrothermal systems are sufficiently rapid to influence metabolic pathways utilized by organisms that inhabit vent environments.     

Formation of Zn- and Fe-sulfides near hydrothermal vents at the Eastern Lau Spreading Center: implications for sulfide bioavailability to chemoautotrophs

Background  

The speciation of dissolved sulfide in the water immediately surrounding deep-ocean hydrothermal vents is critical to chemoautotrophic organisms that are the primary producers of these ecosystems. The objective of this research was to identify the role of Zn and Fe for controlling the speciation of sulfide in the hydrothermal vent fields at the Eastern Lau Spreading Center (ELSC) in the southern Pacific Ocean. Compared to other well-studied hydrothermal systems in the Pacific, the ELSC is notable for unique ridge characteristics and gradients over short distances along the north-south ridge axis.