An XAS study of the structure and thermodynamics of Cu(I) chloride complexes in brines up to high temperature (400 °C, 600 bar)

The transport and deposition of copper in saline hydrothermal fluids are controlled by the stability of copper(I) complexes with ligands such as chloride. Despite their role in the formation of most hydrothermal copper deposits, the nature and stability of Cu(I) chloride complexes in highly saline brines remains controversial. We present new X-ray absorption data (P = 600 bar, T = 25-400 °C, salinity up to 17.2 m Cl), which indicate that the linear (x = 1, 2) complexes are stable up to supercritical conditions. Distorted trigonal planar complexes predominate at room temperature and at high salinity (>3 m LiCl): subtle changes in the XANES spectrum with increasing salinity may reflect geometric distortions of this complex. Similar changes were observed in UV-Vis data [Liu, W., Brugger, J., McPhail, D.C., Spiccia, L., 2002. A spectrophotometric study of aqueous copper(I) chloride complexes in LiCl solutions between 100 °C and 250 °C. Geochim. Cosmochim. Acta66, 3615-3633], and were erroneously interpreted as a new species, . Our XAS data and ab-initio XANES calculations show that this tetrahedral species is not present to any significant degree in our solutions. The stability of the complexe decreases with increasing temperature; under supercritical conditions and in brines under magmatic-hydrothermal conditions (e.g., 15.58 m Cl, 400 °C, 600 bar), only the linear Cu(I) chloride complexes were observed. This result and the instability of the complex are also consistent with the recent ab-initio molecular dynamic calculations of Sherman [Sherman D. M.(2007) Complexation of Cu⁺ in hydrothermal NaCl brines: ab-initio molecular dynamics and energetics. Geochim. Cosmochim. Acta71, 714-722]. This study illustrates the power of the quantitative nature of XANES and EXAFS measurements for deciphering the speciation of weak transition metal complexes up to magmatic-hydrothermal conditions.The systematic XANES data are used to retrieve the formation constant for at 150 °C, which is in good agreement with the reinterpretation of the UV-Vis data of Liu et al. (Liu et al., 2002). At high temperatures (?400 °C), the solubility of chalcopyrite in equilibrium with hematite-magnetite-pyrite and K-feldspar-muscovite-quartz calculated with the new properties is lower than that calculated using the previous model, and the calculated solubilities are at the lower end of the range of values measured in brine inclusions from porphyry copper systems.     

Complexation of Cu in Hydrothermal NaCl Brines: Ab initio molecular dynamics and energetics

Chloride complexation of Cu⁺ controls the solubility of copper(I) oxide and sulfide ore minerals in hydrothermal and diagenetic fluids. Solubility measurements and optical spectra of high temperature CuCl solutions have been interpreted as indicating the formation of CuCl, , and complexes. However, no other monovalent cation forms tri- and tetrachloro complexes. EXAFS spectra of high temperature Cu-Cl solutions, moreover, appear to show only CuCl and complexes at T > 100 °C. To reconcile these results, I investigated the nature and stability of Cu-Cl complexes using ab initio cluster calculations and ab initio (Car-Parrinello) molecular dynamics simulations for CuCl-NaCl-H₂O systems at 25 to 450 °C. Ab initio molecular dynamic simulations of 1 m CuCl in a 4 m Cl solution give a stable complex at 25 °C over 4 ps but show that the third Cl⁻ is weakly bound. When the temperature is increased along the liquid-vapour saturation curve to 125 °C, the complex dissociates into and Cl⁻; only forms at 325 °C and 1 kbar. Even in a 15.6 m Cl brine at 450 °C, only the complex forms over a 4 ps simulation run.Cluster calculations with a static dielectric continuum solvation field (COSMO) were used in an attempt directly estimate free energies of complex formation in aqueous solution. Consistent with the MD simulations, the complex is slightly stable at 25 °C but decreases in stability with decreasing dielectric constant (ε). The complex is predicted to be unstable at 25 °C and becomes increasingly unstable with decreasing dielectric constant. In hydrothermal fluids (ε < 30) both the and complexes are unstable to dissociation into and Cl⁻.The results obtained here are at odds with recent equations of state that predict and complexes are the predominant species in hydrothermal brines. In contrast, I predict that only complexes will be significant at T > 125 °C, even in NaCl-saturated brines. The high-temperature (T > 125 °C) optical spectra of CuCl solutions and solubility measurements of Cu minerals in Cl-brines need to be reinterpreted in terms of only the CuCl and complexes.     

Synthesis and properties of ammoniojarosites prepared with iron-oxidizing acidophilic microorganisms at 22-65 °C

Ammoniojarosite [(NH₄,H₃O)Fe₃(OH)₆(SO₄)₂], a poorly soluble basic ferric sulfate, was produced by microbiological oxidation of ferrous sulfate at pH 2.0-3.0 over a range of concentrations (5.4-805 mM) and temperatures (22-65 °C). Ammoniojarosites were also produced by chemical (abiotic) procedures in parallel thermal (36-95 °C) experiments. At 36 °C, schwertmannite [ideally Fe₈O₈(OH)₆(SO₄)] was the only solid product formed at <10 mM concentrations. Between 11.5 and 85.4 mM , a mixed product of ammoniojarosite and schwertmannite precipitated, as identified by X-ray diffraction. In excess of 165 mM , ammoniojarosite was the only solid phase produced. An increase in the incubation temperature using thermoacidophiles at 45 and 65 °C accelerated the formation of ammoniojarosite in culture solutions containing 165 mM . Both the biogenic and chemical ammoniojarosites were yellow (2Y-4Y in Munsell hue), low surface area (<1 m²/g), well crystalline materials with average c_o and a_o unit cell parameters of 17.467 ± 0.048 Å and 7.330 ± 0.006 Å, respectively. Strong positive correlations were observed between unit cell axial ratios (c_o/a_o) and increasing synthesis temperature in both biotic and abiotic systems. All samples were N deficient compared to stoichiometric ammoniojarosite, and both chemical and X-ray data indicated partial replacement of by H₃O⁺ to form solid solutions with 0.14-0.24 mole H₃O⁺ per formula unit. The morphology of the biogenic jarosites included aggregated discs, pseudo-cubic crystals and botryoidal particles, whereas the chemical specimens prepared at 36-95 °C were composed of irregular crystals with angular edges. Morphological information may thus be useful to evaluate environmental parameters and mode of formation. The data may also have application in predicting phase boundary conditions for Fe(III) precipitation in biogeochemical processes and treatment systems involving acid sulfate waters.     

Dissociation constants and speciation in aqueous Li2SO4 and K2SO4 from measurements of electrical conductance to 673 K and 29 MPa

The electrical conductivities of aqueous solutions of Li₂SO₄ and K₂SO₄ have been measured at 523-673 K at 20-29 MPa in dilute solutions for molalities up to 2 × 10⁻² mol kg⁻¹. These conductivities have been fitted to the conductance equation of Turq, Blum, Bernard, and Kunz with a consensus mixing rule and mean spherical approximation activity coefficients. In the temperature interval 523-653 K, where the dielectric constant, ε, is greater than 14, the electrical conductance data can be fitted by a solution model which includes ion association to form , , and , where M is Li or K. The adjustable parameters of this model are the first and second dissociation constants of the M₂SO₄. For the 673 K and 300 kg m⁻³ state point where the Coulomb interactions are the strongest (dielectric constant, ε = 5), models with more extensive association give good fits to the data. In the case of the Li₂SO₄ model, including the multi-ion associate, , gave an extremely good fit to the conductance data.     

Dawsonite synthesis and reevaluation of its thermodynamic properties from solubility measurements: Implications for mineral trapping of CO2

Over the last decade, a significant research effort has focused on determining the feasibility of sequestering large amounts of CO₂ in deep, permeable geologic formations to reduce carbon dioxide emissions to the atmosphere. Most models indicate that injection of CO₂ into deep sedimentary formations will lead to the formation of various carbonate minerals, including the common phases calcite (CaCO₃), dolomite (CaMg(CO₃)₂), magnesite (MgCO₃), siderite (FeCO₃), as well as the far less common mineral, dawsonite (NaAlCO₃(OH)₂). Nevertheless, the equilibrium and kinetics that control the precipitation of stable carbonate minerals are poorly understood and few experiments have been performed to validate computer codes that model CO₂ sequestration.In order to reduce this uncertainty we measured the solubility of synthetic dawsonite according to the equilibrium: , from under- and oversaturated solutions at 50-200 °C in basic media at 1.0 mol · kg⁻¹ NaCl. The solubility products (Q_s) obtained were extrapolated to infinite dilution to obtain the solubility constants (. Combining the fit of these values and fixing  at 25 °C, which was derived from the calorimetric data of Ferrante et al. [Ferrante, M.J., Stuve, J.M., and Richardson, D.W., 1976. Thermodynamic data for synthetic dawsonite. U.S. Bureau of Mines Report Investigation, 8129, Washington, D.C., 13p.], the following thermodynamic parameters for the dissolution of dawsonite were calculated at 25 °C: , and . Subsequently, we were able to derive values for the Gibbs energy of formation (, enthalpy of formation ( and entropy ( of dawsonite. These results are within the combined experimental uncertainties of the values reported by Ferrante et al. (1976). Predominance diagrams are presented for the dawsonite/boehmite and dawsonite/bayerite equilibria at 100 °C in the presence of a saline solution with and without silica-containing minerals.     

Modeling the effects of bond environment on equilibrium iron isotope fractionation in ferric aquo-chloro complexes

Four or five sets of ab initio models, including Unrestricted Hartree Fock (UHF) and hybrid Density Functional Theory (DFT) are calculated for each species in a series of aqueous ferric aquo-chloro complexes: , , , FeCl₃(H₂O)₃, FeCl₃(H₂O)₂, , FeCl₅H₂O²⁻, , ) in order to determine the relative isotopic fractionation among the complexes, to compare the results of different models for the same complexes, to examine factors that influence the magnitude of the isotopic fractionation, and to compare bond-partner-driven fractionation with redox-driven fractionation.Relative to , all models show a nearly linear decrease in ⁵⁶Fe/⁵⁴Fe as the number of Cl⁻ ions per Fe³⁺ ion increases, with slopes of −0.8‰ to −1.0‰ per Cl⁻ at 20 °C. At 20 °C, 1000 ln β (β = ⁵⁶Fe/⁵⁴Fe reduced partition function ratio relative to a dissociated Fe atom) values range from 8.93‰ to 9.73‰ for , 8.04-9.12‰ for , 7.61-8.73‰ for , 7.14-8.25‰ for , and 3.09-4.41‰ for . The fractionation between and ranges from 1.5‰ to 2.6‰, depending on the model; this is comparable in magnitude to fractionation effects due to Fe³⁺/Fe²⁺ redox reactions. β values from the UHF models are consistently higher than those from the hybrid DFT models.Isotopic fractionation is shown to be sensitive to differences in ligand bond stiffness (above), coordination number, bond length, and the frequency of the asymmetric Fe-X stretching vibrational mode, as predicted by previous theoretical studies. Complexes with smaller coordination numbers have higher 1000 ln β (7.46‰, 5.25‰, and 3.48‰ for , ,, respectively, from the B3LYP/6-31G(d) model). Species with the same number of chlorides but fewer waters also show the effect of coordination number on 1000 ln β: (7.46‰ vs. 7.05‰ for FeCl₃(H₂O)₂ vs. FeCl₃(H₂O)₃ and 5.25‰ vs. 4.94‰ for vs. FeCl₅H₂O²⁻ with the B3LYP/6-31G(d) model). As more Fe-Cl bonds substitute for Fe-OH₂ bonds (with a resulting decrease in β), the lengths of the Fe-Cl bonds and the Fe-O bonds increase.Preliminary modeling of shows an Fe³⁺/Fe²⁺ fractionation of 3.2‰ for the B3LYP/6-31G(d) model, in agreement with previous studies. The addition of an explicit outer hydration sphere of 12 H₂O molecules to models of improves agreement with measured vibrational frequencies and bond lengths; 1000 ln β increases by 0.8-1.0‰. An additional hydration sphere around increases 1000 ln β by only 0.1‰.Isotopic fractionations predicted for this simple system imply that ligands present in an aqueous iron environment are potentially important drivers of fractionation, and suggest that significant fractionation effects are likely in other aqueous systems containing sulfides or organic ligands. Fractionation effects due to both speciation and redox must be considered when interpreting iron isotope fractionations in the geological record.     

The solubility of platinum and gold in NaCl brines at 1.5 kbar, 600 to 800°C: A laser ablation ICP-MS pilot study of synthetic fluid inclusions

The concentration and distribution of Pt and Au in a fluid-melt system has been investigated by reacting the metals with S-free, single-phase aqueous brines (20, 50, 70 wt% eq. NaCl) ± peraluminous melt at a confining pressure of 1.5 kbar and temperatures of 600 to 800 °C, trapping the fluid in synthetic fluid inclusions (quartz-hosted) and vesicles (silicate melt-hosted), and quantifying the metal content of the trapped fluid and glass by laser ablation ICP-MS. HCl concentration was buffered using the assemblage albite-andalusite-quartz and fO₂ was buffered using the assemblage Ni-NiO. Over the range of experimental conditions, measured concentrations of Pt and Au in the brines (, ) are on on the order of 1-10³ ppm. Concentrations of Pt and Au in the melt (, ) are ∼35-100 ppb and ∼400-1200 ppb, respectively. Nernst partition coefficients (, ) are on the order of 10²-10³ and vary as a function of (non-Henry’s Law behavior). Trapped fluids show a significant range of metal concentrations within populations of inclusions from single experiments (∼ 1 log unit variability for Au; ∼2-3 log unit variability for Pt). Variability in metal concentration within single inclusion groups is attributed to premature brine entrapment (prior to metal-fluid-melt equilibrium being reached); this allows us to make only minimum estimates of metal solubility using metal concentrations from primary inclusions. The data show two trends: (i) maximum and average values of and in inclusions decrease ∼2 orders of magnitude as fluid salinity () increases from ∼4 to 40 molal (20 to 70 wt % eq. NaCl) at a constant temperature; (ii) maximum and average values of increase approximately 1 order of magnitude for every 100°C increase temperature at a fixed . The observed behavior may be described by the general expression:

     

Zinc complexation in aqueous sulfide solutions: Determination of the stoichiometry and stability of complexes via ZnS(cr) solubility measurements at 100 °C and 150 bars

The solubility of ZnS_(cr) was measured at 100 °C, 150 bars in sulfide solutions as a function of sulfur concentration (m(S_total) = 0.02-0.15) and acidity (pH_t = 2-11). The experiments were conducted using a Ti flow-through hydrothermal reactor enabling the sampling of large volumes of solutions at experimental conditions, with the subsequent concentration and determination of trace quantities of Zn. Prior to the experiments, a long-term in situ conditioning of the solid phase was performed in order to attain the reproducible Zn concentrations (i.e. solubilities). The ZnS_(cr) solubility product was monitored in the course of the experiment. The following species were found to account for Zn speciation in solution: Zn²⁺ (pH_t < 3), (pH_t 3-4.5), (pH_t 5-8), and ZnS(HS)⁻ (pH_t > 8) (pH_t predominance regions are given for m(S_total) = 0.1). Solubility data collected in this study at pH_t > 3 were combined with the ZnS_(cr) solubility product determined at lower pH to yield the following equilibrium constants (t = 100 °C, P = 150 bars):

     

Microbial ammonia oxidation and enhanced nitrogen cycling in the Endeavour hydrothermal plume

Ammonium was injected from the subseafloor hydrothermal system at the Endeavour Segment, Juan de Fuca Ridge, into the deep-sea water column resulting in an -rich (?177 nM) neutrally buoyant hydrothermal plume. This was quickly removed by both autotrophic ammonia oxidation and assimilation. The former accounted for at least 93% of total net removal, with its maximum rate in the neutrally buoyant plume (?53 nM d⁻¹) up to 10-fold that in background deep water. Ammonia oxidation in this plume potentially added 26-130 mg into the deep-sea water column. This oxidation process was heavily influenced by the presence of organic-rich particles, with which ammonia-oxidizing bacteria (AOB) were often associated (40-68%). AOB contributed up to 10.8% of the total microbial communities within the plume, and might constitute a novel lineage of β-proteobacterial AOB based on 16S rRNA and amoA phylogenetic analyses. Meanwhile, assimilation rates were also substantially enhanced within the neutrally buoyant plume (?26.4 nM d⁻¹) and accounted for at least 47% of total net removal rates. The combined oxidation and assimilation rates always exceeded total net removal rates, suggesting active in situregeneration rates of at least an order of magnitude greater than the particulate nitrogen flux from the euphotic zone. Ammonia oxidation is responsible for turnover of 0.7-13 days and is probably the predominant in situ organic carbon production process (0.6-13 mg C m⁻² d⁻¹) at early stages of Endeavour neutrally buoyant plumes.     

New indices and calibrations derived from the distribution of crenarchaeal isoprenoid tetraether lipids: Implications for past sea surface temperature reconstructions

Several studies have shown that there is a strong relationship between the distribution of crenarchaeotal isoprenoid glycerol dibiphytanyl glycerol tetraethers (GDGTs) and sea surface temperature (SST). Based on this, a ratio of certain GDGTs, called TEX₈₆ (TetraEther indeX of tetraethers consisting of 86 carbon atoms), was developed as a SST proxy. In this study, we determined the distribution of crenarchaeotal isoprenoid GDGTs in 116 core-top sediments mostly from (sub)polar oceans and combined these data with previously published core-top data. Using this extended global core-top dataset (n = 426), we re-assessed the relationship of crenarchaeal isoprenoid GDGTs with SST. We excluded data from the Red Sea from the global core-top dataset to define new indices and calibration models, as the Red Sea with its elevated salinity appeared to behave differently compared to other parts of the oceans. We tested our new indices and calibration models on three different paleo datasets, representing different temperature ranges. Our results indicate that the crenarchaeol regio-isomer plays a more important role for temperature adaptation in (sub)tropical oceans than in (sub)polar oceans, suggesting that there may be differences in membrane adaptation of the resident crenarchaeotal communities at different temperatures. We, therefore, suggest to apply two different calibration models. For the whole calibration temperature range (−3 to 30 °C), a modified version of TEX₈₆ with a logarithmic function which does not include the crenarchaeol regio-isomer, called , is shown to correlate best with SST: (r² = 0.86, n=396, p <0.0001). Application of on sediments from the subpolar Southern Ocean results in realistic absolute SST estimates and a similar SST trend compared to a diatom SST record from the same core. , which is defined as the logarithmic function of TEX₈₆, yields the best correlation with SST, when the data from the (sub)polar oceans are removed: (r² = 00.87, n = 255, p < 0.0001). Furthermore, gives the best correlation for mescosm data with temperatures ranging between 10 and 46 °C. For Quaternary sediments from the tropical Arabian Sea, both and yield similar trends and SST estimates. However, the extrapolation of calibration on a sediment record from a greenhouse world ocean predicts more reliable absolute SST estimates and relative SST changes in agreement with estimates based on the δ¹⁸O of planktonic foraminifera. Based on the comparison of and derived SSTs using the core top data, we recommend applying above 15 °C and below 15 °C. In cases where paleorecords encompass temperatures both below and above 15 °C, we suggest to use .     

Gold and copper partitioning in magmatic-hydrothermal systems at 800 °C and 100 MPa

Porphyry-type ore deposits sometimes contain fluid inclusion compositions consistent with the partitioning of copper and gold into vapor relative to coexisting brine at the depositional stage. However, this has not been reproduced experimentally at magmatic conditions. In an attempt to determine the conditions under which copper and gold may partition preferentially into vapor relative to brine at temperatures above the solidus of granitic magmas, we performed experiments at 800 °C, 100 MPa, oxygen fugacity () buffered by Ni-NiO, and fixed at either 3.5 × 10⁻² by using intermediate solid solution-pyrrhotite, or 1.2 × 10⁻⁴ by using intermediate solid solution-pyrrhotite-bornite. The coexisting vapor (∼3 wt.% NaCl eq.) and brine (∼68 wt.% NaCl eq.) were composed initially of NaCl + KCl + HCl + H₂O, with starting HCl set to <1000 μg/g in the aqueous mixture. Synthetic vapor and brine fluid inclusions were trapped at run conditions and subsequently analyzed by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Our experiments demonstrate that copper and gold partitioned strongly into the magmatic volatile phase(s) (MVP) (i.e., vapor or brine) relative to a silicate melt over the entire imposed range of . Nernst style partition coefficients between coexisting brine (b) and melt (m), D^b/m (±1σ), range from 3.6(±2.2) × 10¹ to 4(±2) × 10² for copper and from 1.2(±0.6) × 10² to 2.4(±2.4) × 10³ for gold. Partition coefficients between coexisting vapor (v) and melt, D^v/m range from 2.1 ± 0.7 to 18 ± 5 and 7(±3) × 10¹ to 1.6(±1.6) × 10² for copper and gold, respectively. Partition coefficients for all experiments between coexisting brine and vapor, D^b/v (±1σ), range from 7(±2) to 1.0(±0.4) × 10² and 1.7(±0.2) to 15(±2) for copper and gold, respectively. Observed average D^b/v at an of 1.2 × 10⁻⁴ were elevated, 95(±5) and 15 ± 1 for copper and gold, respectively, relative to those at the higher of 3.5 × 10⁻² where D^b/v were 10(±5) for copper and 7(±6) for gold. Thus, there is an inverse relationship between the and the D^b/v for both copper and gold with increasing resulting in a decrease in the D^b/v signifying increased importance of the vapor phase for copper and gold transport. This suggests that copper and gold may complex with volatile S-species as well as Cl-species at magmatic conditions, however, none of the experiments of our study at 800 °C and 100 MPa had a D^b/v ? 1. We did not directly determine speciation, but infer the existence of some metal-sulfur complexes based on the reported data. We suggest that copper and gold partition preferentially into the brine in most instances at or above the wet solidus. However, in most systems, the mass of vapor is greater than the mass of brine, and vapor transport of copper and gold may become more important in the magmatic environment at higher , lower , or near the critical point in a salt-water system. A D^b/v ? 1 at subsolidus hydrothermal conditions may also occur in response to changes in temperature, , , and/or acidity.Additionally, both copper and gold were observed to partition into intermediate solid solution and bornite much more strongly than into vapor, brine or silicate melt. This suggests that, although vapor and brine are both efficient at removing copper and gold from a silicate melt, the presence of Cu-Fe sulfides can sequester a substantial portion of the copper and gold contained within a silicate melt if the Cu-Fe sulfides are abundant.     

Sorption of yttrium and rare earth elements by amorphous ferric hydroxide: Influence of solution complexation with carbonate

The influence of solution complexation on the sorption of yttrium and the rare earth elements (YREEs) by amorphous ferric hydroxide was investigated at 25 °C over a range of pH (4.0-7.1) and carbonate concentrations . Distribution coefficients, defined as , where [MS_i]_T is the total concentration of sorbed YREE, M_T is the total YREE concentration in solution, and [S_i] is the concentration of amorphous ferric hydroxide, initially increased in magnitude with increasing carbonate concentration, and then decreased. The initial increase of is due to sorption of YREE carbonate complexes , in addition to sorption of free YREE ions (M³⁺). The subsequent decrease of , which is more extensive for the heavy REEs, is due to the increasing intensity of YREE solution complexation by carbonate ions. The competition for YREEs between solution complexation and surface complexation was modeled via the equation:

     

The dissociation of carbonic acid in NaCl solutions as a function of concentration and temperature

Potentiometric measurements of the stoichiometric constants for the dissociation of carbonic acid in NaCl solutions ( and ) have been made as a function of molality (0-6 m) and temperature (0-50 °C). The results have been fitted to the equations

     

Oxygen isotope fractionation between apatite-bound carbonate and water determined from controlled experiments with synthetic apatites precipitated at 10-37 °C

The oxygen isotope fractionation between the structural carbonate of inorganically precipitated hydroxyapatite (HAP) and water was determined in the range 10-37 °C. Values of 1000 ln α() are linearly correlated with inverse temperature (K) according to the following equation: 1000 ln α() = 25.19 (±0.53)·T⁻¹ − 56.47 (±1.81) (R² = 0.998). This fractionation equation has a slightly steeper slope than those already established between calcite and water ( [O’Neil et al., 1969] and [Kim and O’Neil, 1997]) even though measured fractionations are of comparable amplitude in the temperature range of these experimental studies. It is consequently observed that the oxygen isotope fractionation between apatite carbonate and phosphate increases from about 7.5‰ up to 9.1‰ with decreasing temperature from 37 °C to 10 °C. A compilation of δ¹⁸O values of both phosphate and carbonate from modern mammal teeth and bones confirms that both variables are linearly correlated, despite a significant scattering up to 3.5‰, with a slope close to 1 and an intercept corresponding to a 1000 ln α() value of 8.1‰. This apparent fractionation factor is slightly higher or close to the fractionation factor expected to be in the range 7-8‰ at the body temperature of mammals.     

Olivine/melt transition metal partitioning, melt composition, and melt structure—Influence of Al for Si substitution in the tetrahedral network of silicate melts

The influence on olivine/melt transition metal (Mn, Co, Ni) partitioning of substitution in the tetrahedral network of silicate melt structure has been examined at ambient pressure in the 1450-1550 °C temperature range. Experiments were conducted in the systems NaAlSiO₄-Mg₂SiO₄- SiO₂ and CaAl₂Si₂O₈-Mg₂SiO₄-SiO₂ with about 1 wt% each of MnO, CoO, and NiO added. These compositions were used to evaluate how, in silicate melts, substitution and ionization potential of charge-balancing cations affect activity-composition relations in silicate melts and mineral/melt partitioning.The exchange equilibrium coefficient, , is a positive and linear function of melt Al/(Al + Si) at constant degree of melt polymerization, NBO/T. The is negatively correlated with the ionic radius, r, of the M-cation and also with the ionization potential (Z/r², Z = electrical charge) of the cation that serves to charge-balance Al³⁺ in tetrahedral coordination in the melts. The activity coefficient ratio, (γ_M/γ_Mg)^melt, is therefore similarly correlated.These melt composition relationships are governed by the distribution of Al³⁺ among coexisting Q-species in the peralkaline (depolymerized) melts coexisting with olivine. This distribution controls Q-speciation abundance, which, in turn, controls (γ_M/γ_Mg)^melt and . The relations between melt structure and olivine/melt partitioning behavior lead to the suggestion that in natural magmatic systems mineral/melt partition coefficients are more dependent on melt composition and, therefore, melt structure the more alkali-rich and the more felsic the melt. Moreover, mineral/melt partition coefficients are more sensitive to melt composition the more highly charged or the smaller the ionic radius of the cation of interest.     

Arsenous acid ionisation in aqueous solutions from 25 to 300 °C

The ultraviolet spectra of dilute, aqueous arsenic (III)-containing solutions have been measured from 25 to 300 °C at the saturated vapour pressure. From these measurements, the equilibrium constant was obtained for the reaction