Sulfur isotope composition of putative primary troilite in chondrules from Bishunpur and Semarkona

The sulfur isotopic compositions of putative primary troilite grains within 15 ferromagnesian chondrules (10 FeO-poor and 5 FeO-rich chondrules) in the least metamorphosed ordinary chondrites, Bishunpur and Semarkona, have been measured by ion microprobe. Some troilite grains are located inside metal spherules within chondrules. Since such an occurrence is unlikely to be formed by secondary sulfidization processes in the solar nebula or on parent bodies, those troilites are most likely primary, having survived chondrule-forming high-temperature events. If they are primary, they may be the residues of evaporation at high temperatures during chondrule formation and may have recorded mass-dependent isotopic fractionations. However, the supposed primary troilites measured in this study do not show any significant sulfur isotopic fractionations (<1 ‰/amu) relative to large troilite grains in matrix. Among other chondrule troilites that we measured, only one (BI-CH22) apparently has a small excess of heavy isotopes (2.7 ± 1.4 ‰/amu) consistent with isotopic fractionation during evaporation. All other grains have isotopic fractionations of <1 ‰/amu. Because sulfur is so volatile that evaporation during chondrule formation is probably inevitable, non-Rayleigh evaporation most likely explains the lack of isotopic fractionation in putative primary troilite inside chondrules. Evaporation through the surrounding silicate melt would have suppressed the isotopic fractionation after silicate dust grains melted. At lower temperatures below extensive melting of silicates, a heating rate of >10⁴-10⁶ K/h would be required to avoid a large degree of sulfur isotopic fractionation in the chondrule precursors. This heating rate may provide a new constraint on the chondrule formation processes.     

A study of chondrule rims and chondrule irradiation records in unequilibrated ordinary chondrites

In order to investigate the possibility that chondrules may have had an independent existence in space, we have searched for unusual nuclear track densities in chondrules and studied the compositions of chondrule rims on chondrules from thirteen unequilibrated ordinary chondrites. Our search for unusual radiation features has been negative. Observed track densities can be explained in terms of cosmic ray exposure ages of the respective meteorites. Fine-grained rims that surround chondrules in unequilibrated ordinary chondrites are heterogeneous in composition consisting of varying proportions of iron sulfide and a poorly characterized silicate phase. The latter phase or phases are roughly chondritic in composition. Fine-grained rims of the kind seen in primitive type 3 ordinary chondrites are absent in higher petrographie grades; more crystalline, coarse-grained and lacy sulfide rims, however, are observed. Our observations can be explained by chondrules having had an independent existence in space during which they acquired rims either by condensation on their surfaces or by accretion of fine particles. However, accumulation of rims while chondrules resided on a meteorite parent body cannot be ruled out at this time. In any case, we do not propose that the chondrules themselves formed by condensation. Absence of a track record of space exposure of chondrules could be due to shielding by matter in space if, for example, chondrules were present in space in clouds made of dust, gas and/or chondrules.     

Formation processes of compound chondrules in CV3 carbonaceous chondrites: Constraints from oxygen isotope ratios and major element concentrations

We found thirty compound chondrules in two CV3 carbonaceous chondrites. The abundance in each meteorite relative to single chondrules is 29/1846 (1.6%) in Allende and 1/230 (0.4%) in Axtell. We examined petrologic features, major element concentrations and oxygen isotopic compositions. Textural, compositional and isotopic evidence suggests that multiple, different mechanisms are responsible for the formation of compound chondrules.Seven compound chondrules are composed of two conjoined porphyritic chondrules with a blurred boundary. At the boundary region of this type of compounds, a poikilitic texture is commonly observed. This suggests that the two chondrules were melted when they came to be in contact. On the other hand, seventeen compound chondrules consist of two conjoined chondrules with a discrete boundary. The preservation of spherical boundary planes of an earlier-formed chondrule of this type implies that it already solidified before fusing with a later-formed chondrule that was still melted. Six samples out of 17 compound chondrules of this type are composed of two BO chondrules. The BO-BO compound chondrules have a unique textural feature in common: the directions of the barred olivines are mostly parallel between two chondrules. This cannot be explained by a simple collision process and forces another mechanism to be taken into consideration.The remaining six compound chondrules differ from the others; they consist of an earlier-formed chondrule enclosed by a later-formed chondrule. A large FeO enrichment was observed in the later-formed chondrules and the enrichment was much greater than that in the later-formed chondrules of other types of compounds. This is consistent with the relict chondrule model, which envisages that the later-formed chondrule was made by a flash melting of a porous FeO-rich dust clump on an earlier-formed chondrule. The textural evidence of this type of compound shows that the earlier-formed chondrule has melted again to varying degrees at the second heating event. This implies that FeO concentrations in bulk chondrules increases during the second heating event if an earlier-formed chondrule was totally melted together with the FeO-rich dust aggregates.Silicate minerals such as olivine and low-Ca pyroxene in compound chondrules have oxygen isotope compositions similar to those in single chondrules from CV3 chondrites. The oxygen isotope composition of each part of the compound chondrule is basically similar to their chondrule pair, but silicates in some chondrules show varying degrees of ¹⁶O-enrichment down to −15‰ in δ¹⁸O, while those in their partners have ¹⁶O-poor invariable compositions near 0 ‰ in δ¹⁸O. This implies that the two chondrules in individual compounds formed in the same environments before they became conjoined and the heterogeneous oxygen isotope compositions in some chondrules resulted from incomplete exchange of oxygen atoms between ¹⁶O-rich chondrule melts and ¹⁶O-poor nebular gas.     

Fine,nickel-poor Fe-Ni grains in the olivine of unequilibrated ordinary chondrites

Fine (?2 μm), Ni-poor (? 10 mg/g) Fe-Ni grains are common inclusions in the olivine in porphyritic chondrules in unequilibrated ordinary chondrites. The olivine grains appear to be relicts that survived chondrule formation without melting. The most common occurrence of this “dusty” metal is in the core of olivine grains having clear Fe-poor rims and surrounded either by small euhedral clear olivine grains zoned with FeO increasing toward the border of the grains or by large elongated Fe-poor orthopyroxenes oriented parallel to the chondrule surface and enclosing small round olivine grains. Various amounts of Ca, Al-rich glass are always present. The dusty metal is occasionally found in the rims of olivine grains either isolated in the matrix or included in chondrules. A rare occurrence is as bands in highly deformed olivines.This dusty metal appears to be the product of in situ reduction of FeO from the host olivine. Among the possible reductants H₂ or carbonaceous matter (CH₂)_n seem the most likely. Hydrogen may have been implanted by solar-wind or solar-flare irradiation, but this requires that dissipation of nebular gas occurred before the end of the chondrule formation process. Carbonaceous matter may have been implanted by shock. Less likely reductants are nebular CO or C dissolved in the olivine lattice. The large relict olivine grains may be nebular condensates or, more likely, fragments broken off earlier generations of chondrules.     

Physical properties of chondrules in different chondrite groups: Implications for multiple melting events in dusty environments

Chondrite groups (CV, CK, CR) with large average chondrule sizes have low proportions of RP plus C chondrules, high proportions of enveloping compound chondrules, high proportions of chondrules with (thick) igneous rims, and relatively low proportions of type-I chondrules containing sulfide. In contrast, chondrite groups (CM, CO, OC, R, EH, EL) with smaller average chondrule sizes have the opposite properties. Equilibrated CK chondrites have plagioclase with relatively low Na; equilibrated OC, R, EH and EL chondrites have more sodic plagioclase. Enveloping compound chondrules and chondrules with igneous rims formed during a remelting event after the primary chondrule was incorporated into a dustball. Repeated episodes of remelting after chondrules were surrounded by dust would tend to produce large chondrules. RP and C chondrules formed by complete melting of their precursor assemblages; remelting of RP and C chondrules surrounded by dust would tend to produce porphyritic chondrules as small dust particles mixed with the melt, providing nuclei for crystallizing phenocrysts. This process would tend to diminish the numbers of RP and C chondrules. Correlations among these chondrule physical properties suggest that chondrite groups with large chondrules were typically surrounded by thick dust-rich mantles that formed in locally dusty nebular environments. Chondrules that were surrounded by thick dust mantles tended to cool more slowly because heat could not quickly radiate away. Slow cooling led to enhanced migration of sulfide to chondrule surfaces and more extensive sulfide evaporation. These chondrules also lost Na; the plagioclase that formed from equilibrated CK chondrites was thus depleted in Na.     

Oxygen-isotopic compositions of relict and host grains in chondrules in the Yamato 81020 CO3.0 chondrite

We report the oxygen-isotope compositions of relict and host olivine grains in six high-FeO porphyritic olivine chondrules in one of the most primitive carbonaceous chondrites, CO3.0 Yamato 81020. Because the relict grains predate the host phenocrysts, microscale in situ analyses of O-isotope compositions can help assess the degree of heterogeneity among chondrule precursors and constrain the nebular processes that caused these isotopic differences. In five of six chondrules studied, the Δ¹⁷O (=δ¹⁷O −0.52 · δ¹⁸O) compositions of host phenocrysts are higher than those in low-FeO relict grains; the one exception is for a chondrule with a moderately high-FeO relict. Both the fayalite compositions as well as the O-isotope data support the view that the low-FeO relict grains formed in a previous generation of low-FeO porphyritic chondrules that were subsequently fragmented. It appears that most low-FeO porphyritic chondrules formed earlier than most high-FeO porphyritic chondrules, although there were probably some low-FeO chondrules that formed during the period when most high-FeO chondrules were forming.     

Accretion, dispersal, and reaccumulation of the Bishunpur (LL3.1) brecciated chondrite: Evidence from troilite-silicate-metal inclusions and chondrule rims

A set of troilite-silicate-metal (TSM) inclusions and chondrule rims in the Bishunpur (LL3.1) chondrite provide information regarding impact brecciation of small bodies in the early solar system. The TSM inclusions and chondrule rims consist of numerous angular to subrounded silicate grains that are individually enclosed by fine networks of troilite. FeNi metal also occurs in the troilite matrix. The silicates include olivine (Fo_55-98), low-Ca pyroxene (En_78-98), and high-Ca pyroxene (En_48-68Wo_11-32). Al- and Si-rich glass coexists with the silicates. Relatively coarse silicate grains are apparently fragments of chondrules typical of petrologic type-3 chondrites. Troilite fills all available cracks and pores in the silicate grains. Some of the TSM inclusions and rims are themselves surrounded by fine-grained silicate-rich rims (FGR).The TSM inclusions and rims texturally resemble the troilite-rich regions in the Smyer H-chondrite breccia. They probably formed by shock-induced mobilization of troilite during an impact event on a primitive asteroidal body. Because silicates in the TSM inclusions and rims have highly unequilibrated compositions, their precursor was presumably type-3 chondritic material like Bishunpur itself. The TSM inclusions and the chondrules with the TSM rims were fragmented and dispersed after the impact-induced compaction, then reaccreted onto the Bishunpur parent body. FGR probably formed around the TSM inclusions and rims, as well as around some chondrules, during the reaccumulation process. Components of most type-2 and 3 chondrites probably experienced similar processing, i.e., dispersal of unconsolidated materials and subsequent reaccumulation.     

Matrix material in type 3 chondrites—occurrence,heterogeneity and relationship with chondrules

Matrix material in type 3 chondrites forms rims on chondrules, metal-sulfide aggregates, Ca,Al-rich inclusions and chondritic clasts; it also forms lumps up to a millimeter in size, which may contain coarser silicates. Chondrules of all types were found with internal matrix lumps that appear to have entered the chondrules before the latter had crystallized. Mean concentrations of Mg, Na, Al and Ca in matrix occurrences show up to fivefold variations in a single chondrite. Variations between mean matrix compositions of individual type 3 ordinary chondrites are almost as large and partly reflect systematic differences between H, L and LL matrices. Such variations are probably a result of nebular separation of feldspathic material and ferromagnesian silicates.Compositions of chondrules and their matrix rims are normally unrelated, although rim compositions are correlated with those of matrix lumps inside chondrules. A single chondrule was found with a composition nearly identical to that of its internal matrix lump, suggesting that some chondrules may have formed from matrix material. Matrix lumps are as heterogeneous as chondrules, but mean chondrule and matrix compositions differ, even allowing for possible loss of metallic Fe,Ni during chondrule formation. Since bulk compositions of matrix lumps and rims have probably not changed significantly since their formation except for Fe-Mg exchange, our matrix samples cannot represent typical chondrule precursor materials.     

Heating duration of igneous rim formation on a chondrule in the Northwest Africa 3118 CV3oxA carbonaceous chondrite inferred from micro-scale migration of the oxygen isotopes

Due to their common occurrence in various types of chondrites, igneous rims formed on pre-existing chondrules throughout chondrule-forming regions of the solar nebula. Although the peak temperatures are thought to reach similar values to those achieved during chondrule formation events, the heating duration in chondrule rim formation has not been well defined. We determined the two-dimensional chemical and oxygen isotopic distributions in an igneous rim of a chondrule within the Northwest Africa 3118 CV3_oxA chondrite with sub-micrometer resolution using secondary ion mass spectrometry and scanning electron microscopy. The igneous rim experienced aqueous alteration on the CV parent body. The aqueous alteration resulted in precipitation of the secondary FeO-rich olivine (Fa_40–49) and slightly disturbed the Fe-Mg distribution in the MgO-rich olivine phenocrysts (Fa_11–22) at about a 1 μm scale. However, no oxygen isotopic disturbances were observed at a scale greater than 100 nm. The MgO-rich olivine, a primary phase of igneous rim formation, has δ¹⁷O = −6 ± 3‰ and δ¹⁸O = −1 ± 4‰, and some grains contain extreme ¹⁶O-rich areas (δ¹⁷O, δ¹⁸O = ∼−30‰) nearly 10 μm across. We detected oxygen isotopic migration of approximately 1 μm at the boundaries of the extreme ¹⁶O-rich areas. Using oxygen self-diffusivity in olivine, the heating time of the igneous rim formation could have continued from several hours to several days at near liquidus temperatures (∼2000 K) in the solar nebula suggesting that the rim formed by a similar flash heating event that formed the chondrules.     

Oxygen isotope heterogeneity in chondrules from the Mokoia CV3 carbonaceous chondrite

We report a study of the oxygen isotope ratios of chondrules and their constituent mineral grains from the Mokoia, oxidized CV3 chondrite. Bulk oxygen isotope ratios of 23 individual chondrules were determined by laser ablation fluorination, and oxygen isotope ratios of individual grains, mostly olivine, were obtained in situ on polished mounts using secondary ion mass spectrometry (SIMS). Our results can be compared with data obtained previously for the oxidized CV3 chondrite, Allende. Bulk oxygen isotope ratios of Mokoia chondrules form an array on an oxygen three-isotope plot that is subparallel to, and slightly displaced from, the CCAM (carbonaceous chondrite anhydrous minerals) line. The best-fit line for all CV3 chondrite chondrules has a slope of 0.99, and is displaced significantly (by δ¹⁷O ∼ −2.5‰) from the Young and Russell slope-one line for unaltered calcium-aluminum-rich inclusion (CAI) minerals. Oxygen isotope ratios of many bulk CAIs also lie on the CV-chondrule line, which is the most relevant oxygen isotope array for most CV chondrite components. Bulk oxygen isotope ratios of most chondrules in Mokoia have δ¹⁸O values around 0‰, and olivine grains in these chondrules have similar oxygen isotope ratios to their bulk values. In general, it appears that chondrule mesostases have higher δ¹⁸O values than olivines in the same chondrules. Our bulk chondrule data spread to lower δ¹⁸O values than any ferromagnesian chondrules that have been measured previously. Two chondrules with the lowest bulk δ¹⁸O values (−7.5‰ and −11.7‰) contain olivine grains that display an extremely wide range of oxygen isotope ratios, down to δ¹⁷O, δ¹⁸O around -50‰ in one chondrule. In these chondrules, there are no apparent relict grains, and essentially no relationships between olivine compositions, which are homogeneous, and oxygen isotopic compositions of individual grains. Heterogeneity of oxygen isotope ratios within these chondrules may be the result of incorporation of relict grains from objects such as amoeboid olivine aggregates, followed by solid-state chemical diffusion without concomitant oxygen equilibration. Alternatively, oxygen isotope exchange between an ¹⁶O-rich precursor and an ¹⁶O-poor gas may have taken place during chondrule formation, and these chondrules may represent partially equilibrated systems in which isotopic heterogeneities became frozen into the crystallizing olivine grains. If this is the case, we can infer that the earliest nebular solids from which chondrules formed had δ¹⁷O and δ¹⁸O values around -50‰, similar to those observed in refractory inclusions.     

Coarse-grained chondrule rims in type 3 chondrites

Relatively coarse-grained rims occur around all types of chondrules in type 3 carbonaceous and ordinary chondrites. Those in H-L-LL3 chondrites are composed primarily of olivine and low-Ca pyroxene; those in CV3 chondrites contain much less low-Ca pyroxene. Average grain sizes range from ～4 μm in H-L-LL3 chondrites to ～10 μm in CV3 chondrites. Such rims surround ～50%, ～10% and ≤ 1% of chondrules in CV3, H-L-LL3 and CO3 chondrites, respectively, but are rare (≤1%) around CV3 Ca,Al-rich inclusions. Rim thicknesses average ～150 μm in H-L-LL3 chondrites and ～400 μm in CV3 chondrites.The rims in H-L-LL3 chondrites are composed of material very similar to that which comprises darkzoned chondrules and recrysiallized matrix. Dark-zoned chondrules and coarse-grained rims probably formed in the solar nebula from clumps of opaque matrix material heated to sub-solidus to sub-liquidus temperatures during chondrule formation. Mechanisms capable of completely melting some material while only sintering other material require steep thermal gradients; suitable processes are lightning, reconnecting magnetic field lines and, possibly, aerodynamic drag heating.CV chondrites may have formed in a region where the chondrule formation mechanism was less efficient, probably at greater solar distances than the ordinary chondrites. The lesser efficiency of heating could be responsible for the greater abundance of coarse-grained rims around CV chondrules. Alternatively, CV chondrules may have suffered fewer particle collisions prior to agglomeration.     

Chemistry, petrology and bulk oxygen isotope compositions of chondrules from the Mokoia CV3 carbonaceous chondrite

We report bulk chemical compositions and physical properties for a suite of 94 objects, mostly chondrules, separated from the Mokoia CV3_ox carbonaceous chondrite. We also describe mineralogical and petrologic information for a selected subset of the same suite of chondrules. The data are used to examine the range of chondrule bulk compositions, and to investigate the relationships between chondrule mineralogy, texture and bulk compositions, as well as oxygen isotopic properties that we reported previously. Most of the chondrules show minimal metamorphism, corresponding to petrologic subtype <3.2. In general, elemental fractionations observed in chondrule bulk compositions are reflected in the compositions of constituent minerals. For chondrules, mean bulk compositions and compositional ranges are very similar for large (>2 mg) and small (<2 mg) size fractions. Two of the objects studied are described as matrix-rich clasts. These have similar bulk compositions to the chondrule mean, and are potential chondrule precursors. One of these clasts has a similar bulk oxygen isotopic composition to Mokoia chondrules, but the other has an anomalously high value of Δ¹⁷O (+3.60‰).Chondrules are diverse in bulk chemical composition, with factor of 10 variations in most major element abundances that cannot be attributed to secondary processes. The chondrules examined show evidence for extensive secondary oxidation, and possible sulfidization, as expected for an oxidized CV chondrite, but minimal aqueous alteration. Some of the bulk chondrule compositional variation might be the result of chemical (e.g. volatilization or condensation) or physical (e.g. metal loss) processes during chondrule formation. However, we suggest that it is mainly the result of significant variations in the assembly of particles that constituted chondrule precursors. Precursor material likely included a refractory component, possibly inherited from disaggregated CAIs, an FeO-poor ferromagnesian component such as olivine or pyroxene, an oxidized ferromagnesian component, and a metal component. Bulk oxygen isotope ratios of chondrules can be explained if refractory and ferromagnesian precursor materials initially shared similar oxygen isotopic compositions of δ¹⁷O, δ¹⁸O around −50‰, and then significant exchange occurred between the chondrule and surrounding ¹⁶O-poor gas during melting.     

Spinel group minerals in LL3.00-6 chondrites: Indicators of nebular and parent body processes

We carried out a systematic study of spinel group minerals in LL3.00-3.9 and LL4-6 chondrites. With increasing petrologic type, the size and abundance of spinel increase. The compositions of spinel group minerals in type 3 chondrites depend on the occurrence; Mg-Al-rich spinel occurs mainly in chondrules. Some chromite occurs in chondrules and matrix, and nearly pure chromite is exclusively encountered in the matrix. The occurrence of nearly pure chromite and the wide compositional variations distinguish spinel group minerals in types 3.00-3.3 from those in the other types. Spinel group minerals in types 3.5-3.9 show a narrower range of compositions, and those in types 4-6 are homogeneous. The changes in composition and abundance of spinel in type 3 chondrites are most likely due to thermal metamorphism. Therefore, the chemistry of spinel group minerals could be used as a sensitive indicator of metamorphic conditions, not only for type 3-6, but also 3.00-3.9. They can be applied to identify the most primitive (least metamorphosed) chondrites. The bulk compositions of spinel-bearing chondrules and the textural setting of the spinel indicate that most spinel group minerals crystallized directly from chondrule melts. However, some spinel grains, especially those enclosed in olivine phenocrysts, can not be explained by in situ crystallization in the chondrule. We interpret these spinel grains to be relic phases that survived chondrule melting. This is supported by the oxygen isotopic composition of a spinel grain, which has significantly lighter oxygen than the coexisting olivine. The oxygen isotopic composition of this spinel is similar to those of Al-rich chondrules. Our discovery of relic spinel in chondrules is an indication of the complexities in the early solar nebular processes that ranged from formation of refractory inclusion, through Al-rich chondrule, to ferromagnesian chondrules, and attests to the recycling of earlier formed materials into the precursors of later formed materials. The characteristic features of spinel group minerals are not only sensitive to thermal metamorphism, but also shed light on chondrule formation processes.     

Non-spherical lobate chondrules in CO3.0 Y-81020: General implications for the formation of low-FeO porphyritic chondrules in CO chondrites

Non-spherical chondrules (arbitrarily defined as having aspect ratios ≥1.20) in CO3.0 chondrites comprise multi-lobate, distended, and highly irregular objects with rounded margins; they constitute ∼70% of the type-I (low-FeO) porphyritic chondrules in Y-81020, ∼75% of such chondrules in ALHA77307, and ∼60% of those in Colony. Although the proportion of non-spherical type-I chondrules in LL3.0 Semarkona is comparable (∼60%), multi-lobate OC porphyritic chondrules (with lobe heights equivalent to a significant fraction of the mean chondrule diameter) are rare. If the non-spherical type-I chondrules in CO chondrites had formed from totally molten droplets, calculations indicate that they would have collapsed into spheres within ∼10⁻³ s, too little time for their 20-μm-size olivine phenocrysts to have grown from the melt. These olivine grains must therefore be relicts from an earlier chondrule generation; the final heating episode experienced by the non-spherical chondrules involved only minor amounts of melting and crystallization. The immediate precursors of the individual non-spherical chondrules may have been irregularly shaped chondrule fragments whose fracture surfaces were rounded during melting. Because non-spherical chondrules and “circular” chondrules form a continuum in shape and have similar grain sizes, mineral and mesostasis compositions, and modal abundances of non-opaque phases, they must have formed by related processes. We conclude that a large majority of low-FeO chondrules in CO3 chondrites experienced a late, low-degree melting event. Previous studies have shown that essentially all type-II (high-FeO) porphyritic chondrules in Y-81020 formed by repeated episodes of low-degree melting. It thus appears that the type-I and type-II porphyritic chondrules in Y-81020 (and, presumably, all CO3 chondrites) experienced analogous formation histories. Because these two types constitute ∼95% of all CO chondrules, it is clear that chondrule recycling was the rule in the CO chondrule-formation region and that most melting events produced only low degrees of melting. The rarity of significantly non-spherical, multi-lobate chondrules in Semarkona may reflect more-intense heating of chondrule precursors in the ordinary-chondrite region of the solar nebula.     

Trace elements in rims and interiors of Chainpur chondrules

Trace elements were measured in the rims and interiors of nine chondrules separated from the Chainpur LL-3 chondrite. Whole rock samples of Chainpur and samples of separated rims were also measured. Chondrule rims are moderately enriched in siderophile and volatile elements relative to the chondrule interiors. The enriched volatile elements include the lithophilic volatile element Zn. The moderate enrichment of volatiles in chondrule rims and the lack of severe depletion in chondrules can account for the complete volatile inventory in Chainpur. These results support a three-component model of chondrite formation in which metal plus sulfide, chondrules plus rims and matrix silicates are mixed to form chondrites.     

The formation of chondrules by open-system melting of nebular condensates

Experiments were conducted under canonical nebular conditions to see whether the chemical compositions of the various chondrule types can be derived from a single CI-like starting material by open-system melting and evaporation. Experimental charges, produced at 1580 °C and P_H2 of 1.31×10⁻⁵ atm over 1 to 18 hours, consisted of only two phases, porphyritic olivine crystals in glass. Sulfur, metallic-iron and alkalis were completely evaporated in the first minutes of the experiments and subsequently the main evaporating liquid oxides were FeO and SiO₂. Olivines from short runs (2-4 hours) have compositions of Fo₈₃-Fo₈₉, as in Type IIA chondrules, while longer experimental runs (12-18 hours) produce ∼Fo₉₉ olivine, similar to Type IA chondrules. The concentration of CaO in both olivine (up to 0.6 wt.%) and glass, and their Mg#, increased with increasing heating duration. Natural chondrules also show increasing CaO with decreasing S, alkalis, FeO and SiO₂. The similarities in bulk chemistry, mineralogy and textures between Type IIA and IA chondrules and the experimental charges demonstrate that these chondrules could have formed by the evaporation of CI precursors. The formation of silica-rich chondrules (IIB and IB) by evaporation requires a more pyroxene-rich precursor.Based on the FeO evaporation rates measured here, Type IIA and IA chondrules, were heated for at least ∼0.5 and ∼3.5 h, respectively, if formed at 1580 °C and P_H2 of 1.31×10⁻⁵ atm. Type II chondrules may have experienced higher cooling-rates and less evaporation than Type I.The experimental charges experienced free evaporation and exhibited heavy isotopic enrichments in silicon, as well as zero concentrations of S, Na and K, which are not observed in natural chondrules. However, experiments on potassium-rich melts at the same pressure but in closed capsules showed less evaporation of K, and less K isotopic mass fractionation, than expected as a function of decreasing cooling rate. Thus the environment in which chondrules formed is as important as the kinetic processes they experienced. If chondrule formation occurred under conditions in which evaporated gases remained in the vicinity of the residual melts, the extent of evaporation would be reduced and back reaction between the gas and the melt could contribute to the suppression of isotopic mass fractionation. Hence chondrule formation could have involved evaporative loss without Rayleigh fractionation. Volatile-rich Type II and volatile-poor Type I chondrules may have formed in domains with high and low chondrule concentrations, and high partial pressures of lithophile elements, respectively.     

Indicators of parent-body processes: Hydrated chondrules and fine-grained rims in the Mokoia CV3 carbonaceous chondrite

A petrographic and electron microscopic study of the Mokoia CV3 carbonaceous chondrite shows that all of the chondrules and inclusions (>400 μm in diameter) and most of their fine-grained rims studied (referred to as chondrules/rims) contain various amounts of hydrous phyllosilicates (mostly saponite) formed by aqueous alteration of anhydrous silicates. The rims mainly consist of fine-grained olivine and saponite in varying proportions and contain crosscutting veins of Fe-rich olivine. The boundaries between the chondrules and their rims are irregular and show abundant evidence of aqueous alteration interactions between them. In contrast, the host matrix contains very minor amounts of saponite and shows no evidence of such extensive aqueous alteration. The boundaries between the chondrules/rims and the matrix are sharp and show no traces of the matrix having been involved in the alteration of the chondrules/rims. These observations indicate that the aqueous alteration in the chondrules/rims did not occur in the present setting.We suggest that the chondrules/rims are actually clasts transported from a location on the meteorite parent body different from where the Mokoia meteorite was from. The aqueous alteration of the chondrules/rims probably occurred there. The veins in the rims were originally fractures produced in an interchondrule matrix by impacts; these were later filled by Fe-rich olivine during aqueous activity. This location was then involved in impact brecciation, and individual chondrules were ejected as clasts with remnants of the matrix surrounding them. During the continuing brecciation, those chondrule/rim clasts were transported, mixed with anhydrous matrix grains, and finally lithified to the present meteorite. Therefore, the rims are fragmented remnants of a former matrix.Textures characterized by fine-grained rims surrounding chondrules in chondrites have been widely thought to have formed in the solar nebula before they accreted into their parent bodies. However, our results suggest that some textures may not be explained by such an accretionary model; instead, the multi-stage parent-body process modeled for the Mokoia rim formation may be a more plausible explanation.     

Petrology and oxygen isotope compositions of chondrules in E3 chondrites

Chondrules in E3 chondrites differ from those in other chondrite groups. Many contain near-pure endmember enstatite (Fs_<1). Some contain Si-bearing FeNi metal, Cr-bearing troilite, and, in some cases Mg, Mn- and Ca-sulfides. Olivine and more FeO-rich pyroxene grains are present but much less common than in ordinary or carbonaceous chondrite chondrules. In some cases, the FeO-rich grains contain dusty inclusions of metal. The oxygen three-isotope ratios (δ¹⁸O, δ¹⁷O) of olivine and pyroxene in chondrules from E3 chondrites, which are measured using a multi-collection SIMS, show a wide range of values. Most enstatite data plots on the terrestrial fractionation (TF) line near whole rock values and some plot near the ordinary chondrite region on the 3-isotope diagram. Pyroxene with higher FeO contents (∼2-10 wt.% FeO) generally plots on the TF line similar to enstatite, suggesting it formed locally in the EC (enstatite chondrite) region and that oxidation/reduction conditions varied within the E3 chondrite chondrule-forming region. Olivine shows a wide range of correlated δ¹⁸O and δ¹⁷O values and data from two olivine-bearing chondrules form a slope ∼1 mixing line, which is approximately parallel to but distinct from the CCAM (carbonaceous chondrite anhydrous mixing) line. We refer to this as the ECM (enstatite chondrite mixing) line but it also may coincide with a line defined by chondrules from Acfer 094 referred to as the PCM (Primitive Chondrite Mineral) line (Ushikubo et al., 2011). The range of O isotope compositions and mixing behavior in E3 chondrules is similar to that in O and C chondrite groups, indicating similar chondrule-forming processes, solid-gas mixing and possibly similar ¹⁶O-rich precursors solids. However, E3 chondrules formed in a distinct oxygen reservoir.Internal oxygen isotope heterogeneity was found among minerals from some of the chondrules in E3 chondrites suggesting incomplete melting of the chondrules, survival of minerals from previous generations of chondrules, and chondrule recycling. Olivine, possibly a relict grain, in one chondrule has an R chondrite-like oxygen isotope composition and may indicate limited mixing of materials from other reservoirs. Calcium-aluminum-rich inclusions (CAIs) in E3 chondrites have petrologic characteristics and oxygen isotope ratios similar to those in other chondrite groups. However, chondrules from E3 chondrites differ markedly from those in other chondrite groups. From this we conclude that chondrule formation was a local event but CAIs may have all formed in one distinct place and time and were later redistributed to the various chondrule-forming and parent body accretion regions. This also implies that transport mechanisms were less active at the time of and following chondrule formation.     

Iodine-Xenon dating of chondrules from the Qingzhen and Kota Kota enstatite chondrites

Initial ¹²⁹I/¹²⁷I values (I-Xe ages) have been obtained for individual mineralogically characterized chondrules and interchondrule matrix from the enstatite chondrites Qingzhen (EH3) and Kota Kota (EH3). In view of the absence of aqueous alteration and the low-peak metamorphic temperatures experienced by these meteorites, we suggest that the I-Xe ages for the chondrules record the event in which they were formed. These ages are within the range recorded for chondrules from ordinary chondrites, demonstrating that chondrules formed during the same time interval in the source regions of both ordinary chondrites and enstatite chondrites. The timing of this chondrule-forming episode or episodes brackets the I-Xe closure age of planetesimal bodies such as the Shallowater aubrite parent body. Although chondrule formation need not have occurred close to planetesimals, the existence of planetesimals at the same time as chondrule formation provides constraints on models of this process. Whichever mechanisms are proposed to form and transport chondrules, they must be compatible with models of the protosolar nebula which predict the formation of differentiated bodies on the same timescale at the same heliocentric distance.     

Oxygen isotope compositions of chondrules in CR chondrites

We report in situ ion microprobe analyses of oxygen isotopic compositions of olivine, low-Ca pyroxene, high-Ca pyroxene, anorthitic plagioclase, glassy mesostasis, and spinel in five aluminum-rich chondrules and nine ferromagnesian chondrules from the CR carbonaceous chondrites EET92042, GRA95229, and MAC87320. Ferromagnesian chondrules are isotopically homogeneous within ±2‰ in Δ¹⁷O; the interchondrule variations in Δ¹⁷O range from 0 to −5‰. Small oxygen isotopic heterogeneities found in two ferromagnesian chondrules are due to the presence of relict olivine grains. In contrast, two out of five aluminum-rich chondrules are isotopically heterogeneous with Δ¹⁷O values ranging from −6 to −15‰ and from −2 to −11‰, respectively. This isotopic heterogeneity is due to the presence of ¹⁶O-enriched spinel and anorthite (Δ¹⁷O = −10 to −15‰), which are relict phases of Ca,Al-rich inclusions (CAIs) incorporated into chondrule precursors and incompletely melted during chondrule formation. These observations and the high abundance of relict CAIs in the aluminum-rich chondrules suggest a close genetic relationship between these objects: aluminum-rich chondrules formed by melting of spinel-anorthite-pyroxene CAIs mixed with ferromagnesian precursors compositionally similar to magnesium-rich (Type I) chondrules. The aluminum-rich chondrules without relict CAIs have oxygen isotopic compositions (Δ¹⁷O = −2 to −8‰) similar to those of ferromagnesian chondrules. In contrast to the aluminum-rich chondrules from ordinary chondrites, those from CRs plot on a three-oxygen isotope diagram along the carbonaceous chondrite anhydrous mineral line and form a continuum with amoeboid olivine aggregates and CAIs from CRs. We conclude that oxygen isotope compositions of chondrules resulted from two processes: homogenization of isotopically heterogeneous materials during chondrule melting and oxygen isotopic exchange between chondrule melt and ¹⁶O-poor nebular gas.