Petrographic characteristics and depositional conditions of Eocene coals of platform basins, Meghalaya, India

The coal deposits of Meghalaya occur in the Lakadong Sandstone (25–250 m thick) of Eocene age. The coal-bearing formations are understood to have been deposited over platform areas in estuarine and lagoonal environments and subjected to recurrent marine transgressions and regressions during the Eocene period. There are three major groups of coalfields in Meghalaya, viz. Garo Hills (West Daranggiri and Siju Coalfields), Khasi Hills (Langrin and Mawlong–Shella Coalfields) and minor coalfields (Laitryngew, Cherrapunji and Bapung Coalfields). Pillar coal samples have been collected from 10 seams at 15 locations and have been subjected to a detailed petrographic examination for their characterization. An effort has been made to trace the path of their evolution based on coal petrography-based models. The quantitative petrographic analysis shows that these coals are vitrinite rich (45.0–92.9%, mean 73.4% mmf basis) with low concentration of inertinite (0.0–13.8%, mean 3.0% mmf basis), whereas the liptinite occurs in appreciable concentration (5.5–53.1%, mean 22.5% mmf basis). Further, these coals are rich in vitrite (51.6–100%, mean 78.3% mmf basis). The volatile matter (from 38.5% to 70.0%, d.a.f.) and vitrinite reflectance (Rom from 0.37% to 0.68%) characterize these coals, as per German (DIN) and North American classification, approximately as sub-bituminous ‘C' to high volatile ‘C' bituminous. The occurrence of teleutospore (single, double and triple celled) suggests that these coals have originated from a characteristic Tertiary flora. The maceral and microlithotype composition in the coal petrography-based depositional models suggest that the coals of Garo Hills were formed in reed to open water swamps in telmatic to limnic conditions. The coals of Khasi Hills were dominated by forest swamps and telmatic to limno-telmatic conditions. In addition, the occurrence of large-size resins suggests prolific growth of conifers in the swamps.     

Petrologic studies of terrestrial organic matter in Carpathian flysch sediments, southern Poland

In the Carpathian Flysch, coal is present either as exotics of Carboniferous coal deposits or as autochthonous, thin layers of lustrous coal. This paper present the results of the studies of coal-bearing rocks that are coeval with the enclosing flysch sediments. These coals form lenses up to 0.15 m thick. Their morphology precludes an exotic origin. The main petrographic component is collinite with admixtures of poorly fluorescing telinite. Minor components are: exudatinite, sporinite, fusinite, micrinite and sclerotinite. Mineral matter consists of framboidal pyrite clay minerals and quartz.The random reflectance of telocollinite varies from 0.38% to 0.72%, which corresponds to subbituminous and bituminous ranks. Correlation between chemical analysis, coking properties and relfectance measurements, leads to the conclusion that boundary between subbituminous and bituminous coals should be defined by the following values: C=80wt%, VOLATILES=43wt%; calorific VALUE=32.3 MJ/kg; and R^o=0.56–0.57%.Atypical properties, such as: upper C value (75–80wt%); high volatile matter contents (over 43wt%) and low random reflectance (^o about 0.38–0.57%) in subbituminous coals; low C value (about 80–82wt%); low reflectance (0.56–0.72%); and good coking properties, of the bituminous coals are attributed to quick coalification during increasing temperature as a result of tectonic stress.     

Properties of thermally metamorphosed coal from Tanjung Enim Area, South Sumatra Basin, Indonesia with special reference to the coalification path of macerals

Thermally metamorphosed Tertiary age coals from Tanjung Enim in South Sumatra Basin have been investigated by means of petrographic, mineralogical and chemical analyses. These coals were influenced by heat from an andesitic igneous intrusion. The original coal outside the metamorphosed zone is characterized by high moisture content (4.13–11.25 wt.%) and volatile matter content (> 40 wt.%, daf), as well as less than 80 wt.% (daf) carbon and low vitrinite reflectance (VR_max = 0.52–0.76%). Those coals are of subbituminous and high volatile bituminous rank. In contrast the thermally metamorphosed coals are of medium-volatile bituminous to meta-anthracite rank and characterized by low moisture content (only < 3 wt.%) and volatile matter content (< 24 wt.%, daf), as well as high carbon content (> 80 wt.%, daf) and vitrinite reflectance (VR_max = 1.87–6.20%). All the studied coals have a low mineral matter content, except for those which are highly metamorphosed, due to the formation of new minerals.The coalification path of each maceral shows that vitrinite, liptinite and inertinite reflectance converge in a transition zone at VR_max of around 1.5%. Significant decrease of volatile matter occurs in the zone between 0.5% and 2.0% VR_max. A sharp bend occurs at VR_max between 2.0% and 2.5%. Above 2.5%, the volatile matter decreases only very slightly. Between VR_r = 0.5% and 2.0%, the carbon content of the coals is ascending drastically. Above 2.5% VR_r, the carbon content becomes relatively stable (around 95 wt.%, daf).Vitrinite is the most abundant maceral in low rank coal (69.6–86.2 vol.%). Liptinite and inertinite are minor constituents. In the high rank coal, the thermally altered vitrinite composes 82.4–93.8 vol.%. Mosaic structures can be recognized as groundmasss and crack fillings. The most common minerals found are carbonates, pyrite or marcasite and clay minerals. The latter consist of kaolinite in low rank coal and illite and rectorite in high rank coal. Change of functional groups with rank increase is reflected most of all by the increase of the ratio of aromatic C–H to aliphatic C–H absorbances based on FTIR analysis. The Oxygen Index values of all studied coals are low (OI < 5 mg CO₂/g TOC) and the high rank coals have a lower Hydrogen Index (< 130 mg HC/g TOC) than the low rank coals (about 300 mg HC/g TOC). T_max increases with maturity (420–440 °C for low rank coals and 475–551 °C for high rank coals).Based on the above data, it was calculated that the temperature of contact metamorphism reached 700–750 °C in the most metamorphosed coal.     

Organic geochemical characteristics and depositional environments of the Jurassic coals in the eastern Taurus of Southern Turkey

In this study, organic matter content, type and maturity as well as some petrographic and physical characteristics of the Jurassic coals exposed in the eastern Taurus were investigated and their depositional environments were interpreted.The total organic carbon (TOC) contents of coals in the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc areas are 24.54, 66.78 and 49.15%, respectively. The Feke–Akkaya and Kozan–Kizilinc coals have low Hydrogen Index (HI) values while the Kozan–Gedikli coals show moderate HI values. All coal samples display very low Oxygen Index (OI) values. The Kozan–Gedikli coals contain Type II organic matter (OM), the Feke–Akkaya coals contain a mixture of type II and type III OM; and the Kozan–Kizilinc coals are composed of Type III OM. Sterane distribution was calculated as C₂₇ > C₂₉ > C₂₈ from the m/z 217 mass chromatogram for all coal samples.T_max values for the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc coals are 439, 412 and 427 °C. Vitrinite reflectance values (%R_o) for the Feke–Akkaya and Kozan–Kizilinc coal samples were measured as 0.65 and 0.51 and these values reveal that the Feke–Akkaya and Kozan–Kizilinc coals are at subbituminous A or high volatile C bituminous coal stage. On the basis of biomarker maturity parameters, these coals have a low maturity.The pristane/phytane (Pr/Ph) ratios for the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc coals are 1.53, 1.13 and 1.25, respectively. In addition, all coals show a homohopane distribution which is dominated by low carbon numbers, and C₃₅ homohopane index is very low for all coal samples. All these features may indicate that these coals were deposited in a suboxic environment.The high sterane/hopane ratios with high concentrations of steranes, low Pr/Ph ratios and C₂₅/C₂₆ tricyclic ratios > 1 may indicate that these coals formed in a swamp environment were temporarily influenced by marine conditions.     

Constraining the hydrocarbon expulsion history of the coals in Qinshui Basin, North China, from the analysis of fluid inclusions

From the comprehensive study on the homogenization temperatures and the occurrence of fluid inclusions in the framework minerals of the strata between or above the Carboniferous–Permian coals in the Qinshui basin, Shanxi, three stages are predicted of hydrocarbon expulsion from the coals. Combined with the known history of basin evolution, it is deduced that the expulsion of hydrocarbons happened during the J₁ (210–180 Ma), the early K₁ (150–130 Ma) and K₂E₁ (110–60 Ma). In the early stage, the coals produced and discharged coal-generated oils. The average GOI value of four sandstone samples is relatively high, as they have been exposed to high paleo-oil saturation in the strata between or above the coals. The biomarker compositions of oil-bearing fluid inclusions are similar to those of extracts from the coals, and so it is concluded that those oils were derived from the same family of the coals.     

Geology and characterisation of the Pecket coal deposit, Magellan Region, Chile

The geology, petrography and chemical variation of the Pecket coal sequence, Magellan Region (52°57′S, 71°10′W), the only Chilean coal used for electricity generation on a large scale, has been studied in order to predict their combustion behaviour, especially in coal blends. The depositional environment of formation of the coal seams was a swamp rarely exposed to subaerial conditions and was associated with the development of the folded foreland of the Magellan basin during the Tertiary (Oligo–Miocene). The general tectonic regime of the collision of the Antarctic and South American plates is reflected by a system of joints with 40°N–50°W strike. The maceral composition of all six seams studied indicates high contents of vitrinite (>90%), minor content of liptinite (4.7%) and inertinite (<2%). Occurrence of tonstein horizons altered to kaolinite indicates a distal volcanism during peat accumulation. Coal rank varies between lignite and subbituminous (Ro=0.28–0.42%) with an average dry basis calorific value of 5450 kcal/kg, 17 wt.% moisture, 41 wt.% volatile matter, and sulphur content below 0.5 wt.%. The mineral matter (LTA) associated with the coal shows a dominance of kaolinite with quartz, smectite, and minor basanite. SiO₂/Al₂O₃ and Fe₂O₃/CaO ratios of the ashes diminish towards the lower seams. With respect to the utilisation of Pecket coals in combustion, base/acid ratios (B/A) and silica ratios (SR) indicate potential fouling for seams 1, 2, 5, and 6i, with high fouling indexes (Rf) for seams 2 and 5. Pecket coal is excellent for blend combustion due to its low sulphur content.     

Microfacies and depositional environment of Tertiary Tanjung Enim low rank coal, South Sumatra Basin, Indonesia

The South Sumatra basin is among the most important coal producing basins in Indonesia. Results of an organic petrography study on coals from Tanjung Enim, South Sumatra Basin are reported. The studied low rank coals have a mean random huminite reflectance between 0.35% and 0.46% and are dominated by huminite (34.6–94.6 vol.%). Less abundant are liptinite (4.0–61.4 vol.%) and inertinite (0.2–43.9 vol.%). Minerals are found only in small amounts (0–2 vol.%); mostly as iron sulfide.Based on maceral assemblages, the coals can be grouped into five classes: (1) humotelinite-rich group, (2) humodetrinite-rich group, (3) humocollinite-rich group, (4) inertinite-rich group and (5) humodetrinite–liptinite-rich group. Comparing the distribution of maceral assemblages to the maceral or pre-maceral assemblages in modern tropical domed peat in Indonesia reveals many similarities. The basal section of the studied coal seams is represented typically by the humodetrinite–liptinite-rich group. This section might be derived from sapric or fine hemic peat often occurring at the base of modern peats. The middle section of the seams is characterized by humotelinite-rich and humocollinite-rich groups. The precursors of these groups were hemic and fine hemic peats. The top section of the coal seams is typically represented by the humodetrinite-rich or inertinite-rich group. These groups are the counterparts of fibric peat at the top of the modern peats. The sequence of maceral assemblages thus represents the change of topogenous to ombrogenous peat and the development of a raised peat bog.A comparison between the result of detailed maceral assemblage analysis and the paleodepositional environment as established from coal maceral ratio calculation indicates that the use of coal maceral ratio diagrams developed for other coal deposits fails to deduce paleo-peat development for these young tropical coals. In particular, mineral distribution and composition should not be neglected in coal facies interpretations.     

Study of petrographic composition and depositional environment of the coals from Queen seam of Yellendu area,Godavari valley coalfield,Andhra Pradesh

The study of coal succession from bore hole No. Q-448 of Yellendu area of the Godavari valley coalfield, Andhra Pradesh reveals that the coals of Queen seam are high volatile bituminous C in rank and have vitrinite reflectance (R_o max %) varying between of 0.52 and 0.62%. The petrographic constitution however, suggests that the depositional site appears to be a slowly sinking and tectonically controlled basin, having received continuous supply of vegetal matter rich resource at regular intervals. The formation of inertinite rich coal suggests, oxidising enviornment of deposition. The dominence of vitrinite and liptinite constituents in these coals postulates the existence of alternating cold and humid spells. The present study indicates that these coals originated under an alternate oxic and anoxic moor condition.     

A microscopic study of the combustion residues of subbituminous and bituminous coals from Alberta, Canada

Chars produced by the combustion of a set of three coals from Alberta, Canada, were classified morphologically using reflected light microscopy. Produced chars are different in morphological features, pore thickness, anisotropy and degree of reactivity, because of differences in the vitrinite and inertinite contents.The subbituminous A coal produced the highest percentage of unreactive or slightly reactive components due to its high inertinite content (20.0%), followed by isotropic cenospheres. Isotropic cenospheres, both thin- and thick-walled, and exploded cenospheres are the characteristic chars produced by the high-voltile bituminous B coal, whereas the low-volatile bituminous coking coal produced cenospheres with granular anisotropy (mosaic) on the walls and abundant coke fragmentsOptical microscopy is useful in differentiating the performance of a series of coals during combustion based on petrographic composition and rank and can aid in understanding the relationship between ‘reactive’ and ‘non-reactive’ coal macerals to burnout performance.     

Facies control on the petrographic composition of inertitic coals

The petrography of lignitic, subbituminous and bituminous inertinitic coals (i.e. coals containing > 30 modal percent inertinite on a mineral-matter-free basis) derived from limnic and paralic facies in the Upper Silesian coal basin of Poland was investigated. Paralic coals were observed to contain small amounts of telinite and abundant pyrofusinite compared to limnic coals. The ratio of oxysemifusinite and oxyfusinite to pyrosemifusinite and pyrofusinite is lower in paralic coals as compared to limnic coals. The statistical analysis of the reflectances of the inertinite group macerals and of vitrinite shows that paralic coals are more heterogeneous than limnic coals. This greater degree of heterogeneity may explain the differences in reactivity among coals that otherwise have the same rank and elemental and petrographic composition.     

Structure of the Transkei Basin and Natal Valley, Southwest Indian Ocean, from seismic reflection and potential field data

Marine geophysical data from the southern Natal Valley and northern Transkei Basin, offshore southeast Africa, were used to study the structure of the crust and sedimentary cover in the area. The data includes seismic reflection, gravity and magnetics and provides information on the acoustic basement geometry (where available), features of the sedimentary cover and the basin's development. Previously mapped Mesozoic magnetic anomalies over a part of the basin are now recognized over wider areas of the basin. The ability to extend the correlation to the southeast within the Natal Valley further confirms an oceanic origin for this region and provides an opportunity to amplify the existing plate boundary reconstructions.The stratigraphic structure of the southern Natal Valley and the northern Transkei Basin reflects processes of the ocean crust formation and subsequent evolution. The highly variable relief of the acoustic basement may relate to the crust formation in the immediate vicinity of the continental transform margin. Renewed submarine seismicity and neotectonic activity in the area is probably related to the diffuse boundary between the Nubia and Somalia plates.2.5-D crustal models show that a 1.7–3.2-km-thick sediment sequence overlies a 6.3±1.2-km-thick normal oceanic crust in the deep southern Natal Valley and Transkei Basin. The oceanic crust in the study area is heterogeneous, made up of blocks of laterally varying remanent magnetization (0.5–3.5 A/m) and density (2850–2900 kg/m³). Strong modifications of accretionary processes near ridge/fracture zone intersections may be a reason of such heterogeneity.     

Coal petrology of coal seams from the Leão-Butiá Coalfield, Lower Permian of the Paraná Basin, Brazil — Implications for coal facies interpretations

In the Leão-Butiá Coalfield, Rio Grande do Sul the coal seams occur in the Rio Bonito Formation, Guatá Group, Tubarão Supergroup of the Paraná Basin, Brazil and are of Permian (Artinskian–Kungurian) age.This study is the first detailed investigation on the coal petrographic characterization of the coal-bearing sequence in relation to the depositional settings of the precursor mires, both in terms of whole seam characterization and in-seam variations. The study is based on the analyses of nine coal seams (I2, CI, L4, L3, L2, L1, S3, S2, S1), which were selected from core of borehole D-193, Leão-Butiá and represent the entire coal-bearing sequence.The interpretation of coal facies and depositional environment is based on lithotype, maceral and microlithotype analyses using different facies-critical petrographic indices, which were displayed in coal facies diagrams. The seams are characterized by the predominance of dull lithotypes (dull, banded dull). The dullness of the coal is attributed to relatively high mineral matter, inertinite and liptinite contents. The petrographic composition is dominated by vitrinite (28–70 vol.% mmf) and inertinite (> 30 vol.% mmf) groups. Liptinite contents range from 7 to 30 vol.% (mmf) and mineral matter from 4–30 vol.%. Microlithotypes associations are dominated by vitrite, duroclarite, carbominerite and inertite. It is suggested that the observed vertical variations in petrographic characteristics (lithotypes, microlithotypes, macerals, vitrinite reflectance) were controlled by groundwater level fluctuations in the ancient mires due to different accommodation/peat accumulation rates.Correlation of the borehole strata with the general sequence-stratigraphical setting suggests that the alluvial fan system and the coal-bearing mudstone succession are linked to a late transgressive systems tract of sequence 2. Based on average compositional values obtained from coal facies diagrams, a deposition in a limno-telmatic to limnic coal facies is suggested.     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

Anomalous gold contents in brown coals and peat in the south-eastern region of the Western-Siberian platform

One hundred twenty-two samples of Jurassic and Paleogene brown coals and 1254 peat samples from the south-eastern region of the Western-Siberian platform were analyzed for gold by the neutron-activation method. Mean content of Au in Jurassic coals is 30 ± 8 ppb, in Paleogene coals is 10.6 ± 4.8 ppb, and in peat is 6 ± 1.4 ppb. Concentrations of gold as high as 4.4 ppm were found in coal ash and 0.48 ppm in the peat ash. Coal beds with anomalous gold contents were found at Western-Siberian platform for the first time.Negative correlation between gold and ash yield in coals and peat and highest gold concentrations were found in low-ash and ultra-low-ash coals and peat. Primarily this is due to gold's association with organic matter.For the investigation of mode of occurrence of Au in peat the bitumen, water-soluble and high-hydrolyzed substances, humic acids, cellulose and lignin were extracted from it. It was determined that in peat about 95% of gold is combined with organic matter. Forty to sixty percent of Au is contained in humic acids and the same content is in lignin. Bitumens, water-soluble and high-hydrolyzed substances contain no more than 1% of general gold quantity in peat.The conditions of accumulation of high gold concentrations were considered. The authors suggest that Au accumulation in peat and brown coals and the connection between anomalous gold concentrations and organic matter in low-ash coals and peat can explain a biogenic–sorption mechanism of Au accumulation. The sources of formation of Au high concentration were various Au–Sb, Au–Ag Au–As–Sb deposits that are abundant in the Southern and South-Eastern peripheries of the coal basin.     

Petrographic characteristics of coal from Mailaram coalfield,Godavari valley,Andhra Pradesh

The quantitative maceral study of the Queen seam from Mailaram coalfield of Godavari valley has displayed alternate coal bands rich in vitrinite/liptinite or inertinite. The random vitrinite reflectance (R_o max. %) of these coals, from top part ranges from 0.50 to 0.64%. However, the bottom part of the seam has indicated lower reflectance, between 0.49 and 0.52%. Thus, the Queen seam, in general, has attained high volatile bituminous C rank. The study indicates that the depositional site has been a slowly sinking basin that witnessed alternate dry (oxidizing) and wet (reducing) spells. This subsequently caused fluctuation in water table of the basin and the formation of oxic and anaoxic moor condition, where accumulated vegetal resource transformed into mixed and fusic coal types in due course of time. Being high in liptinite and vitrinite contents and low mineral matter, the Queen seam of Mailaram coalfield has high economic potential.     

On the effects of petrographic composition on coalbed methane sorption

The effect of petrographic composition on the methane sorption capacity has been determined for a suite of coals and organic-rich shales. Subbituminous and bituminous coals were separated into bright and dull lithotypes by hand-picking. The methane sorption capacities range between 0.5 and 23.9 cm³/g at a pressure of 6 MPa. The low volatile bituminous Canmore coal and the anthracite sample have the highest capacities with the “natural coke” having the lowest. For low-rank coals there is no significant difference between bright and dull samples except for one coal with the dull sample having a greater sorption capacity than its bright equivalent. For higher-rank coals, the bright samples have a greater methane capacity than the dull samples and the difference between sample pairs increases with rank. The boghead coal samples have the highest sorption capacities in the liptinite-rich coals suite and are higher than subbituminous to medium volatile bituminous samples. Pore size distribution indicates that methane is held as solution gas in liptinite-rich coals and by physical sorption in micropores in liptinite-poor coals. These contrasting processes illustrate that liptinite-rich samples need to be independently assessed. The positive relationship between reactive inertinite content and methane sorption capacity occurs within the subbituminous to medium volatile bituminous coals because the reactive inertinite is structurally similar to vitrinite and have a higher microporosity than non-reactive inertinite. Reactivity of inertinite should be assessed in CBM studies of dull coals to provide a better understanding of petrographic composition effects on methane capacity.     

Characterization of Turkish coals: a nationwide perspective

The U.S. Geological Survey (USGS) and the Turkish General Directorate of Mineral Research and Exploration (Maden Tetkik ve Arama Genel Müdürlügü, MTA) are working together to provide a better understanding of the chemical properties of Turkish coals from major Turkish lignite producing areas.The coals in Turkey are generally low rank (lignite or subbituminous) formed in several different depositional environments at different geologic times and have differing chemical properties. Eocene coals are limited to northern Turkey; Oligocene coals, found in the Thrace Basins of northwestern Turkey, are intercalated with marine sediments; Miocene coals are generally located in Western Turkey. The coal deposits, which have limnic characteristics, have relatively abundant reserves. Pliocene–Pleistocene coals are found in the eastern part of Turkey. Most of these coals have low calorific values, high moisture, and high ash contents.Analysis of 143 coal channel samples (most are lignite and subbituminous in rank, but a few are bituminous and one is anthracitic in rank) has been completed for up to 54 elements and other coal properties using a variety of analytical techniques, including inductively coupled plasma emission and mass spectrometry, instrumental neutron activation analysis, and various single element techniques and ASTM standard procedures. Many of these coals have elemental concentrations similar to U.S. lignites found in the Gulf Coast and Fort Union regions. However, maximum or mean concentrations of B, Cr, Cs, Ni, As, Br, Sb, Cs, and U in Turkey are higher than the corresponding maximum or mean values found in either the Fort Union or Gulf Coast regions.     

Mercury content of the Springfield coal, Indiana and Kentucky

With pending regulation of mercury emissions in United States power plants, its control at every step of the combustion process is important. An understanding of the amount of mercury in coal at the mine is the first step in this process. The Springfield coal (Middle Pennsylvanian) is one of the most important coal resources in the Illinois Basin. In Indiana and western Kentucky, Hg contents range from 0.02 to 0.55 ppm. The variation within small areas is comparable to the variation on a basin basis. Considerable variation also exists within the coal column, ranging from 0.04 to 0.224 ppm at one Kentucky site. Larger variations likely exist, since that site does not represent the highest whole-seam Hg nor was the collection of samples done with optimization of trace element variations in mind. Estimates of Hg capture by currently installed pollution control equipment range from 9–53% capture by cold-side electrostatic precipitators (ESP) and 47–81% Hg capture for ESP + flue-gas desulfurization (FGD). The high Cl content of many Illinois basin coals and the installation of Selective Catalytic Reduction of NO_x enhances the oxidation of Hg species, improving the ability of ESPs and FGDs to capture Hg.     

Neotectonics of the Marikina Valley fault system (MVFS) and tectonic framework of structures in northern and central Luzon, Philippines

Recognition of neotectonic features along the Marikina Valley fault system (MVFS) in central Luzon, Philippines indicates a dominantly dextral strike-slip motion during its most recent activity believed to be Late Pleistocene to Holocene in age. Variations in the ratios of vertical to horizontal displacements for the segments imply a dominantly dextral motion of the West Marikina Valley fault (WMVF) and oblique dextral motion for the East Marikina Valley fault (EMVF). The displacement data further suggest that rupturing along the EMVF involved multiple segments and occurred separately from the events along the WMVF segments. Estimated earthquake magnitudes for the WMVF and EMVF based on single-event offsets fall within the range M 7.3–7.7. The vertical slip component in the northern part of the Marikina Valley is associated with the development of a basin between the EMVF and WMVF while the large vertical component in the southernmost segment of the EMVF (Talim) is attributed to volcanism-related extension. Lateral advection of the block bounded by the MVFS and the Philippine fault zone (PFZ), rather than pure shear resulting from an assumed east–west compression, best explains the observed kinematics of the MVFS. This is the result of compression during the westward drift of the Philippine Sea Plate and northern Luzon and occurs through slip along the WMVF and EMVF at rates of 5–7 mm/yr.     

华北晚古生代陆表海盆地海侵事件微观沉积特征及成煤探讨

采用沉积学、煤地质学、古生物学、地层学及地球化学等多技术手段,结合比较分析法的思路,分析了事件型海侵的特点和海侵事件沉积组合特征,研究发现:海侵事件沉积组合为区域对比性强、具沉积时间连续性与相序间断性的暴露沉积-煤层-灰岩组合,其关键沉积学特征是煤层底板的暴露沉积.海侵事件组合灰岩的古生化石个体小、破碎强烈等特征表现为高能量水体运动等环境,孢粉表现为低含量的单缝孢和裸子植物及高含量的三缝孢.地球化学分析表明暴露沉积为陆相环境,煤层中的微量元素表现为海相主要原因是由于泥炭沼泽覆于深水后受海水影响所致.海侵事件成煤与海侵过程成煤差异体现在两个方面:第一,盆地属性差异,即海侵事件成煤形成于陆表海盆地之中,而海侵过程成煤则形成于具有缓坡的边缘海盆地,第二,成煤原理存在着差异,海侵事件成煤强调的是成煤前海侵未发生前的碎屑体系废弃而发育大量泥炭沼泽且被后期突发性海侵终止,而海侵过程成煤则强调的是泥炭沼泽发育于滨海的活动碎屑体系并终止于后期的缓慢海平面上升.