Dating of small gully formation and establishing erosion rates in old gullies under forest by means of anatomical changes in exposed tree roots (Southern Poland)

Small gullies occur in forested gully systems on the undulating loess plateau in southern Poland. The old gully hillslopes are mainly covered with 200-year old beech trees in contrast with the surface of the summit plateau, which is cultivated agricultural land. Beech roots are exposed in the gullies through erosion. Wood vessels in the root tree rings divide into early wood and late wood and, after the roots are exposed, start to make fewer vessels. These anatomical changes in root tree rings allow us to date erosion episodes.Small gullies form in a different manner on the valley floor and on hillslopes. In valley bottoms, erosion features are often formed at some distance from one another, and in time small gullies combine to form a single, longer one. Depending on local conditions, such as the hillslope profile, hillslopes may exhibit headward erosion or may be eroded downwards. Hilllope gullies may be transformed into side valleys as a result of gradual widening and deepening.Dating the exposure of roots indicates that small gullies had already formed in the valley system by 1949. Intensive gully erosion was recorded between 1984 and 2002, during intense precipitation in 1984 and, of particular note, during the extraordinary flood of 1997 which affected all of Central Europe. The mean rate of small gully erosion in the old gully system studied is 0.63 m/year. On hillslopes the mean gully erosion rate is 0.21–0.52 m/year, and on the valley bottoms 0.18–1.98 m/year. High bottom erosion rates resulted from the emergence of long gullies during the erosion episodes in 1984 and 1997. Sheet flow in valley floors intensifies at times of heavy rainfall which causes long gullies to form.Taking into account the fact that conditions favoured erosion, the rate at which the old gullies under forest were transformed should be considered slow. New side gullies form slowly within the valley and it appears that if erosion progressed at the rate observed, new side valleys would take a few hundred years to form.     

Fallout radionuclide tracers identify a switch in sediment sources and transport-limited sediment yield following wildfire in a eucalypt forest

Fire can alter sediment sources and transport rates in river basins, changing landforms and aquatic habitats and degrading downstream water quality. Variability in the response between environments, between fires, and with time since fire makes predicting the catchment-scale effect of individual fires difficult. This study applies the fallout radionuclides ¹³⁷Cs and ²¹⁰Pb_xs to trace the sources and transport of fine sediment through a river network following a wildfire of moderate to extreme severity in the 629-km² eucalypt-forested Nattai River water-supply catchment near Sydney, Australia. The tracer analysis showed that post-fire erosion caused a switch in fine (< 10 µm) sediment sources from 80% subsoil derived from gully and river bank erosion to 86% topsoil derived from hillslope surface erosion. The fine sediment phosphorus content increased 4–10 fold over pre-fire levels. Annual post-fire sediment yields estimated from suspended solids rating curves were 109–250 times higher than they would have been without fire. A large additional amount of sediment remained stored within the river network for at least four years, particularly in lower-gradient reaches. Analysis of a sediment core showed that surface erosion following a previous fire had supplied at least 29% of total catchment sediment yield over the past 36 years. It is concluded that wildfire can alter catchment sediment budgets in two ways. Firstly, a spatially-diffuse pulse of elevated erosion is associated with moderate or intense rainfall events in post-fire years. Secondly, pulses of elevated catchment sediment yield are driven by the timing and river sediment transport capacity of runoff events. Severe post-fire erosion and high interannual hydrologic variability can result in large sediment stores persisting within the river network for many years. Fallout radionuclide tracers are shown to be useful in quantifying fine sediment sources and transport dynamics following wildfire, and the contribution of wildfire to catchment sediment yield.     

Hillslope gullying in the Solway Firth — Morecambe Bay region, Great Britain: Responses to human impact and/or climatic deterioration?

In the Solway Firth — Morecambe Bay region of Great Britain there is evidence for heightened hillslope instability during the late Holocene (after 3000 cal. BP). Little or no hillslope geomorphic activity has been identified occurring during the early Holocene, but there is abundant evidence for late Holocene hillslope erosion (gullying) and associated alluvial fan and valley floor deposition. Interpretation of the regional radiocarbon chronology available from organic matter buried beneath alluvial fan units suggests much of this geomorphic activity can be attributed to four phases of more extensive gullying identified after 2500–2200, 1300–1000, 1000–800 and 500 cal. BP. Both climate and human impact models can be evoked to explain the crossing of geomorphic thresholds: and palaeoecological data on climatic change (bog surface wetness) and human impact (pollen), together with archaeological and documentary evidence of landscape history, provide a context for addressing the causes of late Holocene geomorphic instability. High magnitude storm events are the primary agent responsible for gully incision, but neither such events nor cooler/wetter climatic episodes appear to have produced gully systems in the region before 3000 cal. BP. Increased gullying after 2500–2200 cal. BP coincides with population expansion during Iron Age and Romano-British times. The widespread and extensive gullying after 1300–1000 cal. BP and after 1000–800 cal. BP coincides with periods of population expansion and a growing rural economy identified during Norse times, 9–10th centuries AD, and during the Medieval Period, 12–13th centuries AD. These periods were separated by a downturn associated with the ‘harrying of the north’ AD 1069 to 1070. The gullying episode after 500 cal. BP also coincides with increased anthropogenic pressure on the uplands, with population growth and agricultural expansion after AD 1500 following 150 years of malaise caused by livestock and human (the Black Death) plagues, poor harvests and conflicts on the Scottish/English border. The increased susceptibility to erosion of gullies is a response to increased anthropogenic pressure on upland hillslopes during the late Holocene, and the role of this pressure appears crucial in priming hillslopes before subsequent major storm events. In particular, the cycles of expansion and contraction in both population and agriculture appear to have affected the susceptibility of the upland landscape to erosion, and the hillslope gullying record in the region, therefore, contributes to understanding of the timing and spatial pattern of human exploitation of the upland landscape.     

A grassed waterway and earthen dams to control muddy floods from a cultivated catchment of the Belgian loess belt

Muddy floods, i.e. runoff from cultivated areas carrying large quantities of soil, are frequent and widespread in the European loess belt. They are mainly generated in dry zero-order valleys and are nowadays considered as the most likely process transferring material eroded from cultivated hillslopes during the Holocene to the flood plain. The huge costs of muddy flood damages justify the urgent installation of control measures. In the framework of the ‘Soil Erosion Decree’ of the Belgian Flemish region, a 12 ha-grassed waterway and three earthen dams have been installed between 2002–2004 in the thalweg of a 300-ha cultivated dry valley in the Belgian loess belt. The measures served their purpose by preventing any muddy flood in the downstream village, despite the occurrence of several extreme rainfall events (with a maximum return period of 150 years). The catchment has been intensively monitored from 2005–2007 and 39 runoff events were recorded in that period. Peak discharge (per ha) was reduced by 69% between the upstream and the downstream extremities of the grassed waterway (GWW). Furthermore, runoff was buffered for 5–12 h behind the dams, and the lag time at the outlet of the catchment was thereby increased by 75%. Reinfiltration was also observed within the waterway, runoff coefficients decreasing by a mean of 50% between both extremities of the GWW. Sediment discharge was also reduced by 93% between the GWW's inflow and the outlet. Before the installation of the control measures, specific sediment yield (SSY) of the catchment reached 3.5 t ha^− 1 yr^− 1 and an ephemeral gully was observed nearly each year in the catchment. Since the control measures have been installed, no (ephemeral) gully has developed and the SSY of the catchment dropped to a mean of 0.5 t ha^− 1 yr^− 1. Hence, sediment transfer from the cultivated dry valley to the alluvial plain should dramatically decrease. Total cost of the control measures that are built for a 20 year-period is very low (126 € ha^− 1) compared to the mean damage cost associated with muddy floods in the study area (54 € ha^− 1 yr^− 1). Similar measures should therefore be installed to protect other flooded villages of the Belgian loess belt and comparable environments.     

Short-term changes in the magnitude, frequency and temporal distribution of floods in the Eastern Mediterranean region during the last 45 years — Nahal Oren, Mt. Carmel, Israel

Short-term changes in Eastern Mediterranean precipitation affecting flow regime were documented in Nahal Oren, a 35 km² ephemeral stream in Mt. Carmel, a 500 m high mountain ridge located at the NW coast of Israel. The rainy winter of the Mediterranean type climate (Csa) in Mt. Carmel is characterized by average annual rainfall of 550 mm at the coastal plain to 750 mm at the highest elevation while the summer is hot and dry. Stream flow generates after accumulated rainfall of 120–150 mm while “large floods”, defined as flows with peak discharge of > 5 m³ s^− 1 and/or > 150,000 m³ in volume, are generated in response to rainfall of over 100 mm. Hence, large floods in Nahal Oren stream occur not earlier than December. Precipitation and flow data were divided into two sub-periods: 1957–1969 and 1991–2003 and compared to each other. The results indicate a clear increase in the frequency of large floods, their magnitudes and volumes during the second period with no parallel change in the annual precipitation. Similarly, an increase in storm rainfall–runoff ratio from < 5% to > 15% and a decrease in the threshold rainfall for channel flow by 16–25% were documented. These short-term variations in flooding behavior are explained by the clear decrease in the length of the rainy season and by the resulting significant shortening in the duration of the dry-spells. The increase in the number of large rainfall events and the large floods in each hydrological year together with the increasing number of years with no floods indicate strengthening of their uncertainty of behavior.     

The use of SfM-photogrammetry to quantify and understand gully degradation at the temporal scale of rainfall events: an example from the Ethiopian drylands

Abstract

With the recent technological advances offered by SfM-photogrammetry, we now have the possibility to study gully erosion at very high spatial and temporal scales from multi-temporal DEMs, and thus to enhance our understanding of both gully erosion processes and controls. Here, we examine gully degradation and aggradation at a gully headcut and at four re-incisions along a gully reach in Northern Ethiopia. Environmental controls recorded are topography rainfall, runoff, land use and cover, land management, and soil characteristics. The overall vulnerability of the catchment to erosion is low as calculated from the RUSLE (average 11.83 t ha^?1 y^?1). This reflects the successful land management of the past years. The runoff coefficient was on average 7.3% (maximum 18.2%). Runoff events caused most geomorphic change in the gully, but slumping of the gully bank also occurred on dry days. Most geomorphic change was caused by one major rainfall event of 54.8 mm d^?1, and smaller runoff events caused both degradation and aggradation, often asynchronous between studied sites. Although most research focuses on gully heads alone, re-incisions at lower locations can still cause important gully degradation, which ultimately will reach the gully head and cause instability.     

Holocene sediment budgets in two river catchments in the Southern Upper Rhine Valley, Germany

The Holocene sediments of two catchments in the southern Upper Rhine valley have been quantified as part of the German LUCIFS Programme (RheinLUCIFS), which aims to quantify sediment fluxes in the Rhine catchment since the onset of agriculture in the Neolithic about 7500 years ago.The spatial distribution of the alluvial and colluvial sediments was derived using geological maps, with information on the thickness of these sediments from various sources including auger profiles and data from excavations. The sediments were subdivided into characteristic sedimentary storage types according to the different types of landscapes. For each of the sedimentary storage types an average thickness was assessed so that an integral sediment balance for the Holocene could be derived.For the different types of landscapes in the study area, 32 Holocene sedimentary storage types were determined, 21 in the Elz catchment (1500 km²) and 11 in the Möhlin catchment (230 km²). By adding up the sediment volumes of all single sedimentary storage types the total Holocene sediment volumes for the two catchments were calculated. Erosion depths were determined by dividing the sediment volumes through the potential erosion areas (slope > 2%) and by assuming a sediment delivery ratio (SDR) between 0 and 0.4. The total erosion for the potential erosion areas during the Holocene was calculated as 31–61 cm in the Elz catchment and 44–79 cm in the Möhlin catchment.     

Development of gullies and sediment production in the black soil region of northeastern China

Gully erosion is an important environmental hazard in the black soil region of northeastern China. It is a primary sediment source in the region which needs appropriate soil conservation practices. Gully incision in rolling hills typical of this region was monitored using real-time kinematic GPS to assess the rates of gully development and the resultant sediment production. From 2002 to 2005, gully heads in the study area retreated between 15.4 and 33.5 m, giving an average retreat rate of 8.4 m yr^− 1. Field measurements showed that total sediment production due to gully erosion during the three years ranged between 257 and 1854 m³ yr^− 1, which is equivalent to 326 to 2355 t yr^− 1, with gully-head retreat accounting for 0 to 21.7% (4.4% in average). The sediment delivery ratio was especially high during the summer rainy season (56% in average). Sediment production by ephemeral gullies and permanent gullies was 1.5 times greater than that from surface erosion. Gully heads retreated faster in the spring freeze–thaw period than in the summer. The stage of gully development could be identified based on short-term changes in the gully erosion rate.     

Medium-term evolution of a gully developed in a loess-derived soil

Field surveys in the Belgian loess belt revealed the presence in many forested areas of large, permanent gully systems, most of which are currently inactive. In cultivated areas, such gullies can only be observed in cross-sectional soil profiles through hollows, as virtually all such large gullies are currently infilled with colluvium. Little is known about the spatial distribution, initiation and temporal evolution of these large, permanent gully systems on loess-derived soils. Therefore, the medium-term evolution of a gully initiated in a cultivated area on loess-derived soils southwest of Leuven (Belgium) in May–June 1986, was studied over 13 years. Two intense rainfall events created this (ephemeral) gully, which was not erased by subsequent tillage. Between June 1986 and the December 1999, eight field surveys were conducted to measure gully dimensions. During two surveys, topographic indices (e.g., slope and drainage area) were also measured. Daily rainfall for the measuring period were obtained from a rainfall station located some 10 km southwest of the gully. Analysis of rainfall data showed that no extreme rainfall event was required to initiate such large (permanent) gullies, as observed in forested areas and through cross-sectional profiles in cultivated fields in the Belgian loess belt. Return periods of the event that caused the gully varied between <1 year and 25 years, depending on the assumptions used for defining event rain intensity. Once established, length, surface area and volume of the studied gully evolved with time, cumulative rainfall or cumulative runoff, following a negative exponential relation. This accords with observations reported for gullies in Australia and the USA. This study shows that a degressive increase of gully extension, can be largely explained by the evolution of a “slope–drainage area” factor (S×A, which is proportional to stream power) with time. While gully length and gully surface area asymptotically evolve towards a final value, gully volume decreased at a given point in time. From this, it is inferred that sediment deposition will potentially infill the gully to such an extent that the farmer can drive across it. From this moment on, the combined effect of water and tillage erosion in the gully drainage area, will lead towards rapid infilling. This expected evolution of a gully in cultivated fields accords with observations of large infilled gully systems in cultivated areas in eastern Belgium. The permanent gullies observed under forest are attributed to the fact that after severe gully erosion, this area was reforested or abandoned. Therefore, the sediment source was cut off and the gully was not filled in by sediment deposition.     

Erosional decay of the Yucca Mountain crest, Nevada

A simple numerical landscape evolution model is used to investigate the rate of erosional decay of the Yucca Mountain crest in Nevada, USA — a location proposed as a permanent repository for high level radioactive waste. The model is based on a stream power approach in which we assume that the rate of erosion is proportional to the size of the catchment as a proxy for water flux and to the square of the topographic gradient. The proportionality constants in the model are determined using the structural history of the region: extensional tectonics has dissected the region into a series of well-defined tilt blocks in the last 11 my and the ratio of fault displacement and gully incision during this time is used to scale the model. Forward predictions of our model into the future show that the crest will denude to the level of the proposed site between 500,000 years and 5 my. This prediction is based on conservative estimates for all involved parameters. Erosion may be more rapid if other processes are involved. For example, our model does not consider continuing uplift or catastrophic surface processes as they have been recorded in the region. We conclude that any “total system performance analysis” (TSPA — as has been performed for the Yucca Mountain region to predict geological events inside the ridge) must consider erosion as an integral part of its predictions.     

Sediment source changes over the last 250 years in a dry-tropical catchment, central Queensland, Australia

Rivers draining to the Great Barrier Reef are receiving increased attention with the realisation that European land use changes over the last  150 years may have increased river sediment yields, and that these may have adversely affected the reef environment. Mitigation of the effects associated with such changes is only possible if information on the spatial provenance and dominant types of erosion is known. To date, very few field-based studies have attempted to provide this information. This study uses fallout radionuclide (¹³⁷Cs and ²¹⁰Pb_ex) and geochemical tracing of river bed and floodplain sediments to examine sources over the last  250 years for Theresa Creek, a subcatchment of the Fitzroy River basin, central Queensland, Australia. A Monte Carlo style mixing model is used to predict the relative contribution of both the spatial (geological) sources and erosion types. The results indicate that sheetwash and rill erosion from cultivated basaltic land and channel erosion from non-basaltic parts of the catchment are currently contributing most sediment to the river system. Evidence indicates that the dominant form of channel erosion is gully headcut and sidewall erosion. Sheetwash and rill erosion from uncultivated land (i.e., grazed pasture/woodland) is a comparatively minor contributor of sediment to the river network. Analysis of the spatial provenance of floodplain core sediments, in conjunction with optical dating and ¹³⁷Cs depth profile data, suggests that a phase of channel erosion was initiated in the late nineteenth century. With the development of land underlain by basalt in the mid-twentieth century the dominant source of erosion shifted to cultivated land, although improvements in land management practices have probably resulted in a decrease in sediment yield from cultivated areas in the later half of the twentieth century. On a basin-wide scale, because of the limited spatial extent of cultivation, channel sources are likely to be the largest contributor of sediment to the Fitzroy River. Accordingly, catchment management measures focused on reducing sediment delivery to the Great Barrier Reef should focus primarily on decreasing erosion from channel sources.     

全球视野下崩岗侵蚀地貌及其研究进展

典型的崩岗具有“圆形露天剧场”般的沟头,发育在深厚的红色花岗岩风化壳上,通常包括集水坡面、崩壁、崩积体、沟道、洪积扇5个地貌组成部分;崩壁自上而下可分为表土层、风化红粘土层(红土层)、风化砂质红粘土层(砂土层)、风化粗碎屑层(碎屑层)。中国的崩岗与马达加斯加的lavaka属于同类地貌,两者具有地貌学上的可比性。崩岗群是劣地的表现形式之一,但与欧洲的badland有不同的侵蚀过程,也不同于意大利和巴西的两种沟谷侵蚀地貌calanchi和vocoroca。崩岗主要发育在华南和东南热带和亚热带湿润季风气候区中等偏缓的丘陵坡地上,由沟谷侵蚀发展而成,是沟谷侵蚀的高级阶段。崩岗沟道侵蚀产沙量占崩岗沟谷流域侵蚀产沙量的一半以上,其中沟道沟壁崩塌侵蚀产沙量与沟床下切侵蚀产沙量又各占崩岗沟道侵蚀产沙量的一半左右。野外人工模拟降雨试验是研究崩岗流域侵蚀、产流和产沙过程的有效手段。崩岗流域侵蚀产沙量可以通过崩岗沟谷和洪积扇地形测量加以估算。     

Effective mitigation of debris flows at Lemon Dam, La Plata County, Colorado

To reduce the hazards from debris flows in drainage basins burned by wildfire, erosion control measures such as construction of check dams, installation of log erosion barriers (LEBs), and spreading of straw mulch and seed are common practice. After the 2002 Missionary Ridge Fire in southwest Colorado, these measures were implemented at Knight Canyon above Lemon Dam to protect the intake structures of the dam from being filled with sediment. Hillslope erosion protection measures included LEBs at concentrations of 220–620/ha (200–600% of typical densities), straw mulch was hand spread at concentrations up to 5.6 metric tons/hectare (125% of typical densities), and seeds were hand spread at 67–84 kg/ha (150% of typical values). The mulch was carefully crimped into the soil to keep it in place. In addition, 13 check dams and 3 debris racks were installed in the main drainage channel of the basin.The technical literature shows that each mitigation method working alone, or improperly constructed or applied, was inconsistent in its ability to reduce erosion and sedimentation. At Lemon Dam, however, these methods were effective in virtually eliminating sedimentation into the reservoir, which can be attributed to a number of factors: the density of application of each mitigation method, the enhancement of methods working in concert, the quality of installation, and rehabilitation of mitigation features to extend their useful life. The check dams effectively trapped the sediment mobilized during rainstorms, and only a few cubic meters of debris traveled downchannel, where it was intercepted by debris racks.Using a debris volume-prediction model developed for use in burned basins in the Western U.S., recorded rainfall events following the Missionary Ridge Fire should have produced a debris flow of approximately 10,000 m³ at Knight Canyon. The mitigation measures, therefore, reduced the debris volume by several orders of magnitude. For comparison, rainstorm-induced debris flows occurred in two adjacent canyons at volumes within the range predicted by the model.     

A sediment budget for a grazed semi-arid catchment in the Burdekin basin, Australia

In catchments adjacent to the Great Barrier Reef World Heritage Area in Queensland, Australia, there is a growing concern that sediments and nutrients being exported from the land are having a detrimental effect on coral reef communities. There is a need to determine the processes and rates of erosion from the major land use types, so that management intervention can be initiated to reduce sediment yields where required. This paper presents a sediment budget for Weany Creek, a 13.5 km² grazed semi-arid sub-catchment of the Burdekin River catchment, Australia. A range of field methods was used to measure erosion from hillslopes, gullies and stream banks, as well as identify the amount of sediment being deposited and remobilised on the bed of gullies and the stream network. The data suggests that at least during drought conditions, the primary erosion source in this catchment is gully erosion. However, the largest source of sediment in the budget is actually associated with the remobilisation of in-channel sediment stores. Overall, the sediment budget is comprised of  81% coarse material and 19% fine sediment and an agreement between the fine sediment yield estimated in the sediment budget and the yield measured at the catchment outlet is within 10%. The total sediment yield estimated for this catchment is  4205 t yr^− 1 and is much lower than expected for a catchment of this size. This may reflect the drought conditions during the measurement period; however, there is also the possibility that the primary erosion sources have been exhausted, and the rates of sediment loss may be much lower now than they may have been in the past. Nonetheless, the results show that stored sediment, which may have been deposited in the channel many decades ago, is an important contributor to end of catchment sediment yields and warrants further investigation.     

Cenozoic uplift of Nuussuaq and Disko, West Greenland—elevated erosion surfaces as uplift markers of a passive margin

Remnants of a high plateau have been identified on Nuussuaq and Disko, central West Greenland. We interpret the plateau as an erosion surface (the summit erosion surface) formed mainly by a fluvial system and graded close to its former base level and subsequently uplifted to its present elevation. It extends over 150 km east–west, being of low relative relief, broken along faults, tilted westwards in the west and eastwards in the east, and having a maximum elevation of ca. 2 km in central Nuussuaq and Disko. The summit erosion surface cuts across Precambrian basement rocks and Paleocene–Eocene lavas, constraining its age to being substantially younger than the last rift event in the Nuussuaq Basin, which took place during the late Maastrichtian and Danian. The geological record shows that the Nuussuaq Basin was subjected to subsidence of several kilometres during Paleocene–Eocene volcanism and was transgressed by the sea later during the Eocene. By comparing with results from apatite fission track analysis and vitrinite reflectance maturity data, it is suggested that formation of the erosion surface was probably triggered by an uplift and erosion event starting between 40 and 30 Ma. Surface formation was completed prior to an uplift event that started between 11 and 10 Ma and caused valley incision. This generation of valleys graded to the new base level and formed a lower erosion surface, at most 1 km below the summit erosion surface, thus indicating the magnitude of its uplift. Formation of this generation of valleys was interrupted by a third uplift event also with a magnitude of 1 km that lifted the landscape to near its present position. Correlation with the fission-track record suggests that this uplift event started between 7 and 2 Ma. Uplift must have been caused initially by tectonism. Isostatic compensation due to erosion and loading and unloading of ice sheets has added to the magnitude of uplift but have not significantly altered the configuration of the surface. It is concluded that the elevations of palaeosurfaces (surfaces not in accordance with present climate or tectonic conditions) on West Greenland's passive margin can be used to define the magnitude and lateral variations of Neogene uplift events. The striking similarity between the landforms in West Greenland and those on many other passive margins is also noted.     

Small valley glaciers and the effectiveness of the glacial buzzsaw in the northern Basin and Range, USA

The glacial buzzsaw hypothesis suggests that efficient erosion limits topographic elevations in extensively glaciated orogens. Studies to date have largely focussed on regions where large glaciers (tens of kilometres long) have been active. In light of recent studies emphasising the importance of lateral glacial erosion in lowering peaks and ridgelines, we examine the effectiveness of small glaciers in limiting topography under both relatively slow and rapid rock uplift conditions. Four ranges in the northern Basin and Range, Idaho, Montana, and Wyoming, USA, were chosen for this analysis. Estimates of maximum Pleistocene slip rates along normal faults bounding the Beaverhead–Bitterroot Mountains (~ 0.14 mm y^− 1), Lemhi Range (~ 0.3 mm y^− 1) and Lost River Range (~ 0.3 mm y^− 1) are an order of magnitude lower than those on the Teton Fault (~ 2 mm y^− 1). We compare the distribution of glacial erosion (estimated from cirque floor elevations and last glacial maximum (LGM) equilibrium line altitude (ELA) reconstructions) and fault slip rate with three metrics of topography in each range: the along-strike maximum elevation swath profile, hypsometry, and slope-elevation profiles. In the slowly uplifting Beaverhead–Bitterroot Mountains, and Lemhi and Lost River Ranges, trends in maximum elevation parallel ELAs, independent of variations in fault slip rate. Maximum elevations are offset ~ 500 m from LGM ELAs in the Lost River Range, Lemhi Range, and northern Beaverhead–Bitterroot Mountains, and by ~ 350 m in the southern Beaverhead–Bitterroot Mountains, where glacial extents were less. The offset between maximum topography and mean Quaternary ELAs, inferred from cirque floor elevations, is ~ 350 m in the Lost River and Lemhi Ranges, and 200–250 m in the Beaverhead–Bitterroot Mountains. Additionally, slope-elevation profiles are flattened and hypsometry profiles show a peak in surface areas close to the ELA in the Lemhi Range and Beaverhead–Bitterroot Mountains, suggesting that small glaciers efficiently limit topography. The situation in the Lost River Range is less clear as a glacial signature is not apparent in either slope-elevation profiles or the hypsometry. In the rapidly uplifting Teton Range, the distribution of ELAs appears superficially to correspond to maximum topography, hypsometry, and slope-elevations profiles, with regression lines on maximum elevations offset by ~ 700 and ~ 350 m from the LGM and mean Quaternary ELA respectively. However, Grand Teton and Mt. Moran represent high-elevation “Teflon Peaks” that appear impervious to glacial erosion, formed in the hard crystalline bedrock at the core of the range. Glacier size and drainage density, rock uplift rate, and bedrock lithology are all important considerations when assessing the ability of glaciers to limit mountain range topography. In the northern Basin and Range, it is only under exceptional circumstances in the Teton Range that small glaciers appear to be incapable of imposing a fully efficient glacial buzzsaw, emphasising that high peaks represent an important caveat to the glacial buzzsaw hypothesis.     

Deep-seated., complex tunnel systems — a hydrological study in a semi-arid catchment, Loess Plateau, China

During 1989–1990, delailed monitoring of deep-seated, complex tunnel systems was conducted in Yangdaogou, a subbasin in the Hilly Loess Region, Shanxi, which has a catchment area of 0.203 km². It was found that tunnel flow hydrological processes were characterized by a quick response to rainfall, an early flow peak, and a short duration. All the tunnel discharge was derived from overland flow entering via inlets. However, discharge is not significantly related to rainfall parameters in some tunnels, which is contrary to observations on surface plots. Field surveys show frequent blockages of tunnels caused by collapses inside the tunnels which could be reopened in subsequent events, as well as the occasional abrupt opening of new inlets. As a result, tunnel discharge was highly erratic in some of the monitored events. Partial damming within the tunnel systems may also be involved. Hence, instability in the tunnel systems is one of the key factors affecting their hydrologic response. During the period of monitoring, fifteen events occurred and on average at least 43% (ranging from 0 to 78%) of the total basin water discharge was routed through four major tunnel systems which account for 90% of the catchment area of all tunnel systems in the basin. The deep-seated tunnel systems in this area seem not to be developed from the micro-pipes close to the surface. Instead, they are most likely formed in some catastrophic storms and expanded in subsequent storms. 1997 Elsevier Science B.V.     

Sediment budget analysis of slope–channel coupling and in-channel sediment storage in an upland catchment, southeastern Australia

Slope–channel coupling and in-channel sediment storage can be important factors that influence sediment delivery through catchments. Sediment budgets offer an appropriate means to assess the role of these factors by quantifying the various components in the catchment sediment transfer system. In this study a fine (< 63 µm) sediment budget was developed for a 1.64-km² gullied upland catchment in southeastern Australia. A process-based approach was adopted that involved detailed monitoring of hillslope and bank erosion, channel change, and suspended sediment output in conjunction with USLE-based hillslope erosion estimation and sediment source tracing using ¹³⁷Cs and ²¹⁰Pb_ex. The sediment budget developed from these datasets indicated channel banks accounted for an estimated 80% of total sediment inputs. Valley floor and in-channel sediment storage accounted for 53% of inputs, with the remaining 47% being discharged from the catchment outlet. Estimated hillslope sediment input to channels was low (5.7 t) for the study period compared to channel bank input (41.6 t). However an estimated 56% of eroded hillslope sediment reached channels, suggesting a greater level of coupling between the two subsystems than was apparent from comparison of sediment source inputs. Evidently the interpretation of variability in catchment sediment yield is largely dependent on the dynamics of sediment supply and storage in channels in response to patterns of rainfall and discharge. This was reflected in the sediment delivery ratios (SDR) for individual measurement intervals, which ranged from 1 to 153%. Bank sediment supply during low rainfall periods was reduced but ongoing from subaerial processes delivering sediment to channels, resulting in net accumulation on the channel bed with insufficient flow to transport this material to the catchment outlet. Following the higher flow period in spring of the first year of monitoring, the sediment supplied to channels during this interval was removed as well as an estimated 72% of the sediment accumulated on the channel bed since the start of the study period. Given the seasonal and drought-dependent variability in storage and delivery, the period of monitoring may have an important influence on the overall SDR. On the basis of these findings, this study highlights the potential importance of sediment dynamics in channels for determining contemporary sediment yields from small gullied upland catchments in southeastern Australia.     

Beach morphology and change along the mixed grain-size delta of the dammed Elwha River, Washington

Sediment supply provides a fundamental control on the morphology of river deltas, and humans have significantly modified these supplies for centuries. Here we examine the effects of almost a century of sediment supply reduction from the damming of the Elwha River in Washington on shoreline position and beach morphology of its wave-dominated delta. The mean rate of shoreline erosion during 1939–2006 is ~ 0.6 m/yr, which is equivalent to ~ 24,000 m³/yr of sediment divergence in the littoral cell, a rate approximately equal to 25–50% of the littoral-grade sediment trapped by the dams. Semi-annual surveys between 2004 and 2007 show that most erosion occurs during the winter with lower rates of change in the summer. Shoreline change and morphology also differ spatially. Negligible shoreline change has occurred updrift (west) of the river mouth, where the beach is mixed sand to cobble, cuspate, and reflective. The beach downdrift (east) of the river mouth has had significant and persistent erosion, but this beach differs in that it has a reflective foreshore with a dissipative low-tide terrace. Downdrift beach erosion results from foreshore retreat, which broadens the low-tide terrace with time, and the rate of this kind of erosion has increased significantly from ~ 0.8 m/yr during 1939–1990 to ~ 1.4 m/yr during 1990–2006. Erosion rates for the downdrift beach derived from the 2004–2007 topographic surveys vary between 0 and 13 m/yr, with an average of 3.8 m/yr. We note that the low-tide terrace is significantly coarser (mean grain size ~ 100 mm) than the foreshore (mean grain size ~ 30 mm), a pattern contrary to the typical observation of fining low-tide terraces in the region and worldwide. Because this cobble low-tide terrace is created by foreshore erosion, has been steady over intervals of at least years, is predicted to have negligible longshore transport compared to the foreshore portion of the beach, and is inconsistent with oral history of abundant shellfish collections from the low-tide beach, we suggest that it is an armored layer of cobble clasts that are not generally competent in the physical setting of the delta. Thus, the cobble low-tide terrace is very likely a geomorphological feature caused by coastal erosion of a coastal plain and delta, which in turn is related to the impacts of the dams on the Elwha River to sediment fluxes to the coast.     

Occurrence of soil erosion after repeated experimental fires in a Mediterranean environment

In the Mediterranean area, forest fires have become a first-order environmental problem. Increased fire frequency progressively reduces ecosystem recovery periods. The fire season, usually followed by torrential rains in autumn, intensifies erosion processes and increases desertification risk. In this work, the effect of repeated experimental fires on soil response to water erosion is studied in the Permanent Field Station of La Concordia, Valencia, Spain. In nine 80 m² plots (20 m long × 4 m wide), all runoff and sediment produced were measured after each rainfall event. In 1995, two fire treatments with the addition of different biomass amounts were applied. Three plots were burned with high fire intensity, three with moderate intensity, and three were unburned to be used as control. In 2003, the plots with the fire treatments were burned again with low fire intensities. During the 8-year interval between fires, plots remained undisturbed, allowing regeneration of the vegetation–soil system. Results obtained during the first 5 months after both fire experiments show the high vulnerability of the soil to erosion after a repeated fire. For the burned plots, runoff rates increased three times more than those of 1995, and soil losses increased almost twice. The highest sediment yield (514 g m^− 2) was measured in 2003, in the plots of the moderate fire intensity treatment, which yielded only 231 g m^− 2 of sediment during the corresponding period in 1995. Runoff yield from the control plots did not show significant temporal changes, while soil losses decreased from 5 g m^− 2 in the first post-fire period to 0.7 g m^− 2 in the second one.