Constraining forcing factors and relative sea‐level fluctuations in semi‐enclosed basins: the Late Neogene demise of Lake Pannon

Sedimentary basins are affected by a large number of forcing factors during their evolution and as a result, it is often difficult to isolate the contribution of each individual factor. Many forcing factors are temporally and spatially heterogeneous; they do not affect all parts of the basin in the same way and at the same time. We show that this heterogeneity can be used to identify the contributions of forcing factors by comparing various parts of a basin. This approach is applied to the Pannonian Basin, a back‐arc basin located in Central Europe. In the basin, the amounts of crustal extension, tectonic inversion and sediment influx varied in space and time, while the connection with the marine realm fluctuated. In this study we focus on two currently unresolved issues: firstly, we establish by what processes and from what directions the basin was filled in, and secondly, we investigate whether the basin was affected by the Messinian Salinity Crisis. The analysis of seismic and well data in the previously less studied SE part of the basin demonstrate that progradation occurred from the southern and eastern basin margins, complementing the previously described progradation from the northwestern and northern basin margins. Elsewhere in the basin, an unconformity observed in the progradational basin infill is intensely debated to be the result of either the Messinian Salinity Crisis (MSC) or basin inversion. Having the advantage of minor Pliocene–Quaternary amounts of inversion in the studied part of the basin we show that no regional unconformity is present in the studied stratigraphic interval, which implies that the effects of the MSC on the basin were minor. We infer that being aware of the fact that the effects of relative sea/lake‐level fluctuations may vary significantly across a basin is critical for understanding the evolution of semi‐enclosed basins.     

Tectonic and climatic control on the Late Messinian sedimentary evolution of the Nijar Basin (Betic Cordillera,Southern Spain)

The Late Messinian fill of the Nijar Basin (Betic Cordillera, southeastern Spain) mainly consists of clastic deposits of the Feos Formation that at basin margins rest unconformably above the primary evaporites of the Yesares Formation, the local equivalent of the Mediterranean Lower Gypsum. The Feos Fm. records the upward transition towards non‐marine environments before the abrupt return to fully marine conditions at the base of the Pliocene. The Feos Fm. is clearly two‐phase, with ‘lower’ and ‘upper’ members, which exhibit substantial differences in terms of facies, thickness, depositional trends and cyclical organization. These members record two distinct sedimentary and tectonic stages of Nijar Basin infilling. A high‐resolution, physical‐stratigraphic framework is proposed based on key beds and stratigraphic cyclicity and patterns that differ largely from those of most previously published studies. The predominant influence on stratigraphic cyclicity is interpreted to be precessionally driven climate changes, allowing their correlation to the Late Messinian astronomically calibrated chronostratigraphic framework. Detailed correlations suggest a phase of enhanced tectonic activity, possibly related to the Serrata‐Carboneras strike‐slip fault zone, during the first stage (‘lower’ member), resulting in a strongly articulated topography with structural lows and highs controlling sediment thickness and facies variation. Tectonic activity decreased during the second stage (‘upper’ member), which is characterized by (1) a progressively dampened and homogenized, (2) overall relative base‐level rise and (3) gradual establishment of hypohaline environments. Facies characteristics, overall stacking patterns and depositional trends of the Feos Fm. are analogous with uppermost Messinian successions of the Northern Apennines, Piedmont Basin and Calabria. Despite minor differences related to the local geodynamic setting, these basins experienced a common Late Messinian history that supports the development of a single, large Mediterranean water body characterized by high‐frequency, climatically‐driven changes in sediment flux and base‐level.     

The stratigraphic and structural evolution of the Dzereg Basin, western Mongolia: clastic sedimentation, transpressional faulting and basin destruction in an intraplate, intracontinental setting

The Dzereg Basin is an actively evolving intracontinental basin in the Altai region of western Mongolia. The basin is sandwiched between two transpressional ranges, which occur at the termination zones of two regional‐scale dextral strike‐slip fault systems. The basin contains distinct Upper Mesozoic and Cenozoic stratigraphic sequences that are separated by an angular unconformity, which represents a regionally correlative peneplanation surface. Mesozoic strata are characterized by northwest and south–southeast‐derived thick clast‐supported conglomerates (Jurassic) overlain by fine‐grained lacustrine and alluvial deposits containing few fluvial channels (Cretaceous). Cenozoic deposits consist of dominantly alluvial fan and fluvial sediments shed from adjacent mountain ranges during the Oligocene–Holocene. The basin is still receiving sediment today, but is actively deforming and closing. Outwardly propagating thrust faults bound the ranges, whereas within the basin, active folding and thrusting occurs within two marginal deforming belts. Consequently, active fan deposition has shifted towards the basin centre with time, and previously deposited sediment has been uplifted, eroded and redeposited, leading to complex facies architecture. The geometry of folds and faults within the basin and the distribution of Mesozoic sediments suggest that the basin formed as a series of extensional half‐grabens in the Jurassic–Cretaceous which have been transpressionally reactivated by normal fault inversion in the Tertiary. Other clastic basins in the region may therefore also be inherited Mesozoic depocentres. The Dzereg Basin is a world class laboratory for studying competing processes of uplift, deformation, erosion, sedimentation and depocentre migration in an actively forming intracontinental transpressional basin.     

Structure and geological history of the Congo Basin: an integrated interpretation of gravity,magnetic and reflection seismic data

The stratigraphic, paleogeographic and tectonic evolution of the intracratonic Congo Basin in Central Africa has been revised on the basis of an integrated interpretation of gravity, magnetic and reflection seismic data, together with a literature review of papers sometimes old and difficult to access, map compilation and partial reexamination of outcrop and core samples stored in the Royal Museum for Central Africa (RMCA). The Congo Basin has a long and complex evolution starting in the Neoproterozoic and governed by the interplay of tectonic and climatic factors, in a variety of depositional environments.This multidisciplinary study involving 2D gravity and magnetic modeling as additional constraints for the interpretation of seismic profiles appears to be a powerful tool to investigate sedimentary basins where seismic data alone may be difficult to interpret. The tectonic deformations detected in the Congo Basin after the 1970–1984 hydrocarbon exploration campaign in the Democratic Republic of Congo (DRC) have been attributed to crustal contraction and basement uplift at the center of the basin, following a transpressional inversion of earlier graben structures. Two‐dimensional gravity and magnetic models run along key seismic lines suggest the presence of evaporite sequences in some of the deeper units of the stratigraphic succession, in the lateral continuity with those observed in the Mbandaka and Gilson exploration wells. The poorly defined seismic facies that led to the previous basement uplift interpretation of the crystalline basement is shown to correspond to salt‐rich formations that have been tectonically de‐stabilized. These features may be related to vertical salt‐tectonics connected to the near/far‐field effects of the late Pan‐African and the Permo‐Triassic compressive tectonic events that affected this African part of Gondwana.     

Cretaceous evolution of the Andean margin between 36°S and 40°S latitude through a multi‐proxy provenance analysis of Neuquén Basin strata (Argentina)

During the Cretaceous, the Neuquén Basin transitioned from an extensional back‐arc to a retroarc foreland basin. We present a multi‐proxy provenance study of Aptian to Santonian (125–84 Ma) continental sedimentary rocks preserved in the Neuquén Basin used to resolve changes of sediment drainage pattern in response to the change in tectonic regime. Sandstone petrology and U–Pb detrital zircon geochronology constrain the source units delivering detritus to the basin; apatite U–Pb and fission track dating further resolve provenance and determine the age and patterns of exhumation of the source rocks. Sandstone provenance records a sharp change from a mixed orogenic source during Aptian time (ca. 125 Ma), to a magmatic arc provenance in the Cenomanian (ca. 100 Ma). We interpret this provenance change as the result of the drainage pattern reorganisation from divergent to convergent caused by tectonic basin inversion. During this inversion and early stages of contraction, a transient phase of uplift and basin erosion, possibly due to continental buckling, caused the pre‐Cenomanian unconformity dividing the Lower from Upper Cretaceous strata in the Neuquén Basin. This phase was followed by the development of a retroarc foreland basin characterised by a volcanic arc sediment provenance progressively shifting to a mixed continental basement provenance during Turonian‐Santonian (90–84). According to multi‐proxy provenance data and lag times derived from apatite fission track analysis, this trend is the result of a rapidly exhuming source within the Cordillera to the west, in response to active compressional tectonics along the western margin of South America, coupled with the increasing contribution of material from the stable craton to the east; this contribution is thought to be the result of the weak uplift and exhumation of the foreland due to eastward migration of the forebulge.     

Anatomy and evolution of a Mediterranean-type fault bounded basin: the Lower Pliocene of the northern Crotone Basin (Southern Italy)

The complex development of the northern Crotone Basin, a forearc basin of the Calabrian Arc (Southern Italy), has been documented by sedimentological, stratigraphic and structural analyses. This Mediterranean‐type fault bounded basin consists of small depocentres commonly characterized by a mix of facies that grades from continental to shallow marine. The lower Pliocene infill of the Crotone Basin consists of offshore marls (Cavalieri Marl) that grade upwards into a shallow‐marine to continental succession up to 850 m thick (Zinga Formation). The succession is subdivided into three main stratal units: Zinga 1, Zinga 2, Zinga 3 bounded by major unconformities. The Zinga 1 stratal unit grades from the Cavalieri Marl to deltaic and shoreface deposits, the latter organized into several stacked progradational wedges that show spectacular thickness changes and progressive unconformities related to salt‐cored NE‐trending growth folds and listric normal faults. The Zinga 2 stratal unit records a progressive and moderate deepening of the area, marked by fluvial sedimentation at the base, followed by lagoonal deposits and by a stacking of mixed bioclastic and siliciclastic shoreface units, organized into metre‐scale high‐frequency cycles. Deposition was controlled by NE‐trending synsedimentary normal faults that dissected the basin into a series of half‐grabens. Hangingwall stratigraphic expansion was compensated by footwall condensed sedimentation. The extensional tectonic regime continued during sedimentation of the Zinga 3 stratal unit. Deposition confined within structural lows during a generalized transgressive phase led to local enhancement of tidal flows and development of sand‐wave trains. The tectonic setting testifies the generalized structural domain of a forearc region. The angular unconformity at the top of the Zinga 3 stratal unit is regional, and marks the activation of a large‐scale tectonic phase linked to strike‐slip movements.     

Factors controlling stratal pattern and facies distribution of fluvio‐lacustrine sedimentation in the Sivas mini‐basins,Oligocene (Turkey)

The Sivas Basin, located in the Central Anatolian Plateau of Turkey, is a foreland basin that records a complex interaction between sedimentation, salt tectonics and regional shortening during the Oligo‐Miocene leading to the formation of numerous mini‐basins. The Oligocene sedimentary infill of the mini‐basins consists of a thick continental succession, the Karayün Formation, comprising a vertical succession of three main sub‐environments: (i) playa‐lake, (ii) fluvial braided, and (iii) saline lacustrine. These sub‐environments are seen as forming a large Distributive Fluvial System (DFS) modified through time as a function of sediment supply and accommodation related to regional changes in climate and tectonic regime. Within neighbouring mini‐basins and despite a similar vertical stratigraphic succession, subtle variations in facies assemblages and thickness are observed in stratigraphic units of equivalent age, thus demonstrating the local control exerted by halokinesis. Stratigraphic and stratal patterns reveal in great detail the complex interaction between salt tectonics and sedimentation including different types of halokinetic structures such as hooks, wedges and halokinetic folds. The regional variations of accommodation/sediment supply led to coeval changes in the architectural patterns recorded in the mini‐basins. The type of accommodation regime produces several changes in the sedimentary record: (i) a regime dominated by regional accommodation limits the impact of halokinesis, which is recorded as very small variations in stratigraphic thickness and facies distribution within and between mini‐basins; (ii) a regime dominated by localized salt‐induced accommodation linked to the subsidence of each individual mini‐basin enhances the facies heterogeneity within the DFS, causing sharp changes in stratigraphic thickness and facies assemblages within and between mini‐basins.     

The Stanley unconformity in Lake Huron basin: evidence for a climate-driven closed lowstand about 7900 <Superscript>14</Superscript>C BP,with similar implications for the Chippewa lowstand in Lake Michigan basin

J.L. Hough in 1962 recognized an erosional unconformity in the upper section of early postglacial lake sediments in northwestern Lake Huron. Low-level Lake Stanley was defined at 70 m below present water surface on the basis of this observation, and was inferred to follow the Main Algonquin highstand and Post-Algonquin lake phases about 10 ¹⁴C ka, a seminal contribution to the understanding of Great Lakes history. Lake Stanley was thought to have overflowed from the Huron basin through the Georgian Bay basin and the glacio-isostatically depressed North Bay outlet to Ottawa and St. Lawrence rivers. For this overflow to have occurred, Hough assumed that post-Algonquin glacial rebound was delayed until after the Lake Stanley phase. A re-examination of sediment stratigraphy in northwestern Lake Huron using seismic reflection and new core data corroborates the sedimentological evidence of Hough’s Stanley unconformity, but not its inferred chronology or the level of the associated lowstand. Erosion of previously deposited sediment, causing the gap in the sediment sequence down to 70 m present depth, is attributed to wave erosion in the shoreface of the Lake Stanley lowstand. Allowing for non-deposition of muddy sediment in the upper 20 m approximately of water depth as occurs in the present Great Lakes, the inferred water level of the Stanley lowstand is repositioned at 50 m below present in northwestern Lake Huron. The age of this lowstand is about 7.9 ± 0.3¹⁴C ka, determined from the inferred ¹⁴C age of the unconformity by radiocarbon-dated geomagnetic secular variation in six new cores. This relatively young age shows that the lowstand defined by Hough’s Stanley unconformity is the late Lake Stanley phase of the northern Huron basin, youngest of three lowstands following the Algonquin lake phases. Reconstruction of uplift histories for lake level and outlets shows that late Lake Stanley was about 25–30 m below the North Bay outlet, and about 10 m below the sill of the Huron basin. The late Stanley lowstand was hydrologically closed, consistent with independent evidence for dry regional climate at this time. A similar analysis of the Chippewa unconformity shows that the Lake Michigan basin also hosted a hydrologically closed lowstand, late Lake Chippewa. This phase of closed lowstands is new to the geological history of the Great Lakes. This is the ninth in a series of ten papers published in this special issue of Journal of Paleolimnology. These papers were presented at the 47th Annual Meeting of the International Association for Great Lakes Research (2004), held at the University of Waterloo, Waterloo, Ontario, Canada. P.F. Karrow and C.F.M Lewis were guest editors of this special issue.     

Hinterland basin development and infilling through tectonic and eustatic processes: latest Messinian‐Gelasian Valdelsa Basin,Northern Apennines,Italy

This article reports a stratigraphic and structural analysis of the Neogene‐Quaternary Valdelsa Basin (Central Italy), filled with up to 1000 m of uppermost Miocene to lower Pleistocene strata. The succession is subdivided into seven unconformity‐bounded stratigraphic units (synthems, or large‐scale depositional sequences) that include fluvio‐deltaic and shallow‐marine deposits. Structures related to basin shoulders and internal boundaries controlled the Neogene location and geometry of different depocentres. During the Tortonian‐Messinian, a buried NE‐trending high related to regional, basin‐transverse lineaments separated two adjacent sub‐basins. During the lower Pliocene, compressional displacement along NW‐trending, thrust‐related highs controlled the distribution of depocentres and dispersal of sediment. Extensional tectonics, although previously considered the dominant deformation style affecting the rear of the Northern Apennines since the late Miocene, is no longer considered a dominant control on tectono‐sedimentary development of the Valdelsa basin. Instead, the Valdelsa Basin shares features with continental hinterland basins of orogenic belts where compression, extension, and transcurrent stress fields determine a complex spatial and temporal record of accommodation and sediment supply. In the Valdelsa Basin tectonics and eustatic sea‐level fluctuations were dominant in forcing the deposition of sedimentary cycles at several scales. Zanclean and Gelasian large‐scale depositional sequences were mainly controlled by crustal shortening, whereas a eustatic signal was preferentially recorded during the Piacenzian. Smaller scale depositional sequences, common to most synthems, were controlled by orbitally forced glacio‐eustatic cycles.     

Sedimentary evidence for late Messinian uplift of the SE margin of the Central Anatolian Plateau: Adana Basin,southern Turkey

The Adana Basin of southern Turkey, located at the SE margin of the Central Anatolian Plateau in the vicinity of the Arabia‐Eurasia collision zone, is ideally suited to record Neogene and Quaternary topographic and tectonic changes in the easternmost Mediterranean realm. On the basis of our correlation of 34 seismic reflection profiles with corresponding exposed units along the margins of the Adana Basin, we identify and characterize the seismic facies that corresponds to the upper part of the Messinian Handere Formation (ca. 5.45 to 5.33 Ma), which consists mainly of fluvial conglomerates and marls. The seismic reflection profiles indicate that ca. 1100 km³ of the Handere Formation upper sub‐unit is distributed over ca. 3000 km², reflecting local sedimentation rates of up to 12.5 mm year^?1. This indicates a major increase in both sediment supply and subsidence rates at ca. 5.45 Ma. Our provenance analysis of the Handere Formation upper sub‐unit based on clast counting and palaeocurrent measurements reveals that most of the sediment is derived from the Taurus Mountains at the SE margin of the Central Anatolian Plateau and regions farther north. A comparison of these results with the composition of recent fluvial conglomerates and the present‐day drainage basins indicates major changes between late Messinian and present‐day source areas. We suggest that these changes in drainage patterns and lithological characteristics result from uplift and ensuing erosion of the SE margin of the plateau. We interpret the tectonic evolution of the southern flank of the Anatolian Plateau and the coeval subsidence and sedimentation in the Adana Basin to be related to deep lithospheric processes, particularly lithospheric delamination and slab break‐off.     

Tectono‐sedimentary Evolution of Early Pennsylvanian Alluvial Systems at the Onset of the Alleghanian Orogeny,Pocahontas Basin,Virginia

Foreland basin strata provide an opportunity to review the depositional response of alluvial systems to unsteady tectonic load variations at convergent plate margins. The lower Breathitt Group of the Pocahontas Basin, a sub‐basin of the Central Appalachian Basin, in Virginia preserves an Early Pennsylvanian record of sedimentation during initial foreland basin subsidence of the Alleghanian orogeny. Utilizing fluvial facies distributions and long‐term stacking patterns within the context of an ancient, marginal‐marine foreland basin provides stratigraphic evidence to disentangle a recurring, low‐frequency residual tectonic signature from high‐frequency glacioeustatic events. Results from basin‐wide facies analysis, corroborated with petrography and detrital zircon geochronology, support a two end‐member depositional system of coexisting transverse and longitudinal alluvial systems infilling the foredeep during eustatic lowstands. Provenance data suggest that sediment was derived from low‐grade metamorphic Grenvillian‐Avalonian terranes and recycling of older Palaeozoic sedimentary rocks uplifted as part of the Alleghanian orogen and Archean‐Superior‐Province. Immature sediments, including lithic sandstone bodies, were deposited within a SE‐NW oriented transverse drainage system. Quartzarenites were deposited within a strike‐parallel NE‐SW oriented axial drainage, forming elongate belts along the western basin margin. These mature quartzarenites were deposited within a braided fluvial system that originated from a northerly cratonic source area. Integrating subsurface and sandstone provenance data indicates significant, repeated palaeogeographical shifts in alluvial facies distribution. Distinct wedges comprising composite sequences are bounded by successive shifts in alluvial facies and define three low‐frequency tectonic accommodation cycles. The proposed tectonic accommodation cycles provide an explanation for the recognized low‐frequency composite sequences, defining short‐term episodes of unsteady westward migration of the flexural Appalachian Basin and constrain the relative timing of deformation events during cratonward progression of the Alleghanian orogenic wedge.     

Continental systems tracts of the Brazilian Cretaceous Bauru Basin and their relationship with the tectonic and climatic evolution of South America

The application of sequence stratigraphy concepts to continental deposits lacking the referece provided sea level has been a challenge, mainly because the temporal relationships between stratigraphic surfaces and systems tracts depend on the tectonic and climatic evolution of the area. Using the concept of accommodation space (A) and sediment supply (S), we identify specific stacking patterns of aeolian, lacustrine, fluvial and alluvial systems that correspond to the particular tectonic and climatic evolution of the southeastern portion of South America. With the end of the Early Cretaceous volcanism (133 Ma), the southeastern portion of South America underwent tectonic restructuring, which generated basins that encompassed continental sedimentary sequences. The tectonic events responsible for the accumulation of these sequences occurred during two primary phases. The first phase is related to Early Cretaceous thermal subsidence, which was more pronounced in the regions where the thickest Serra Geral Formation basaltic successions are found, resulting in the formation of Bauru Basin. The second phase was related to the Late Cretaceous uplift in southeastern Brazil as a result of magmatic/volcanic activity associated with the Trindade Mantle Plume. Stratigraphic analysis based on well‐logs and outcrops and aided by petrographic studies identified three sequences that are bounded by regional unconformities that record important changes in the Bauru Basin's tectonic and paleoenvironmental conditions. The unconformity K‐0 is related to the origin of the Bauru Basin in the Early Cretaceous. The Early Cretaceous Sequence 1 (Caiuá Group) is interpreted as a second‐ order sequence, formed by aeolian and fluvial deposits and constituting a Fluvial‐Aeolian Systems Tract. Unconformity K‐1 that was generated in the Late Cretaceous (Cenomanian – Campanian?) is related to the tectonic evolution of the basin and source area. Overlying Unconformity K‐1, lacustrine, fluvial and alluvial deposits display progradational characteristics of the two‐third‐ order sequences: Sequences 2A and 2B, constituted by the Fluvial‐Lacustrine and Alluvial Systems Tracts, respectively, and separated by the Unconformity K‐1A. Sedimentological characteristics, paleosols and stratigraphic architecture, suggest that A/S ratio was neutral in the late stage of the Sequence 1, whereas in the Sequence 2 there was an increase (Sequence 2A) followed by a decrease in the A/S ratio (Sequence 2B). Aeolian facies and paleosol P1 (Sequence 1), fluvial‐lacustrine facies and hydromorphic soils (Sequence 2A), and alluvial facies and Paleosol P2 (Sequence 2B), indicate climatic changes in the South American during the Cretaceous. The stratigraphic framework, subaerial unconformities and paleosols provide key elements for subdividing of the Brazilian continental sequence into third‐order sequences and systems tracts, for identification of allocyclic and autocyclic patterns in time and space.     

Stratigraphic response to spatiotemporally varying tectonic forcing in rifted continental basin: Insight from a coupled tectonic‐stratigraphic numerical model

The role of spatiotemporally varying tectonic forcing in the development of stratigraphic patterns along passive margins and continental rift basins has been recognized for decades, but the exact nature of the stratigraphic response is still debated. This study develops a coupled tectonic‐stratigraphic numerical model with a fixed absolute lake level and constant climate conditions to quantify the signatures of spatiotemporally varying tectonic forcing on the stratigraphic record. This model consists of a three‐dimensional rift basin with a range of geomorphic features and produces a number of well‐recognized stratigraphic patterns, which are commonly interpreted to be caused by lake‐/sea‐level or climate fluctuations. This study demonstrates that the shoreline and grain‐size front are decoupled through the adjustment of the depositional slope and sediment dispersal under spatiotemporally varying tectonic forcing, especially in underfilled basins. Under such a decoupled situation, the pathway of the migrating subsidence centre correlates with the pathway of the grain‐size front, a result of competition between spatiotemporally varying tectonic forcing and autogenic sediment transport. The model results also highlight the significance of three‐dimensional variability in the stratigraphic response to tectonic forcing, which may be overlooked or misinterpreted and suggests a high degree of uncertainty in re‐establishing the base‐level cycles from the stratigraphic record alone. Moreover, spectral analysis of the modelled stratigraphy and tectonic forcing suggests that low‐frequency tectonic signals are more likely to be recorded in the stratigraphy with a lag time, whereas high‐frequency tectonic signals are likely to be shredded, mixed with autogenic signals, or buffered through sediment‐routing systems. Finally, quantitative measurements of the stratigraphic architecture of the Nanpu sag in the Bohai Bay Basin, China are used to tune the numerical model of this study to illustrate how to evaluate the role of tectonic forcing on the development of characteristic stratigraphic sequences.     

Tectono‐climatic evolution of a Neogene intramontane basin (Late Miocene Carboneras subbasin,southeast Spain): revelations from basin mapping and biofacies analysis

Exceptional 3‐D exposures of fault blocks forming a 5 km × 10 km clastic sediment‐starved, marine basin (Carboneras subbasin, southeast Spain) allow a test of the response of carbonate sequence stratigraphic architectures to climatic and tectonic forcing. Temperate and tropical climatic periods recorded in biofacies serve as a chronostratigraphic framework to reconstruct the status of the basin within three time‐slices (late Tortonian–early Messinian, late Messinian, Pliocene). Structural maps and isopach maps trace out the distribution of fault blocks, faults, and over time, their relative motions, propagational patterns and life times, which demonstrate a changing layout of the basin because of a rotation of the regional transtensional stress field. Progradation of early Messinian reefal systems was perpendicular to the master faults of the blocks, which were draped by condensed fore‐slope sediments. The hangingwall basins coincided with the toe‐of‐slope of the reef systems. The main phase of block faulting during the late Tortonian and earliest Messinian influenced the palaeogeography until the late Pliocene (cumulative throw < 150–240 m), whereas displacements along block bounding faults, which moved into the hangingwall, died out over time. An associated shift of the depocentres of calciturbidites, slump masses and fault scarp degradation breccias reflects 500–700 m of fault propagation into the hangingwall. The shallow‐water systems of the footwall areas were repeatedly subject to emergence and deep peripheral erosion, which imply slow net relative uplift of the footwall. In the dip‐slope settings, erosional truncations of tilted proximal deposits prevail, which indicate rotational relative uplift. Block movements were on the order of magnitude of third order sea‐level fluctuations during the late Tortonian and earliest Messinian. We suggest that this might be the reason for the common presence of offlapping geometries in early Messinian reef systems of the Betic Cordilleras. During the late Pliocene, uplift rates fell below third order rates of sea‐level variations. However, at this stage, the basin was uplifted too far to be inundated by the sea again. The evolution of the basin may serve as a model for many other extensional basins around the world.     

The synthetic seismic expression of the Messinian salinity crisis from onshore records: Implications for shallow‐ to deep‐water correlations

The onshore–offshore correlation of sedimentary successions is a common problem in basin analysis, but it becomes critical for the full understanding of the Messinian salinity crisis (MSC), a complex array of palaeoenvironmental events which affected the Mediterranean basin at the end of the Miocene. The outcrop records show that the Messinian stratigraphic architectures may be highly complex as the deposits of the different MSC evolutionary stages can be lithologically similar and separated by erosional surfaces and/or morphostructural highs. The correct definition of the nature and stratigraphic position of Messinian deposits in offshore areas through seismic data may be almost impossible, especially where core data are sparse. To bridge the gap between onshore and offshore records, we have built synthetic seismic sections from well‐constrained outcrop successions. Our results provide useful insights and warnings for the interpretation of offshore data, pointing out that MSC units having different age, nature and depositional settings, may show similar seismic facies and geometries. Conversely, the same deposit may result in different seismic facies, either with parallel and high‐amplitude reflections or even transparent or chaotic due to interference patterns of seismic reflections related to dominant frequency. It follows that a correct interpretation of the nature and age of deep‐seated Messinian deposits can only be obtained through the integration of seismic and core data, and considering the onshore record. The application of our approach to the Balearic Promontory results in an alternative interpretation with respect to previous models. We show that this offshore area has good analogues in the onshore of the Betic Cordillera and includes both shallow and intermediate depth sub‐basins that underwent a strong post‐Messinian subsidence.     

The tectono‐stratigraphic evolution of the Austral Basin and adjacent areas against the background of Andean tectonics,southern Argentina,South America

The Austral Basin (or Magallanes Basin) in southern Argentina is situated in a highly active tectonic zone. The openings of the South Atlantic and the Drake Passage to the east and south, active subduction in the west, and the related rise of the Andes have massively influenced the evolution of this area. To better understand the impacts of these tectonic events on basin formation to its present‐day structure we analysed 2D seismic reflection data covering about 95 000 km² on‐ and 115 000 km² offshore (Austral ‘Marina’ and Malvinas Basin). A total of 10 seismic horizons, representing nine syn‐ and post‐ rift sequences, were mapped and tied to well data to analyse the evolution of sedimentary supply and depocenter migration through time. 1D well backstripping across the study area confirms three main tectonic stages, containing (i) the break‐up phase forming basement graben systems and the evolution of the Late Jurassic – Early Cretaceous ancient backarc Austral/Rocas Verdes Basin (RVB), (ii) the inversion of the backarc marginal basin and the development of the foreland Austral Basin and (iii) the recent foreland Austral Basin. Synrift sedimentation did not exceed the creation of accommodation space, leading to a deepening of the basin. During the Early Cretaceous a first impulse of compression due to Andes uplift caused rise also of parts of the basin. Controlling factors for the subsequent tectonic development are subduction, balanced phases of sedimentation, accumulation and erosion as well as enhanced sediment supply from the rising Andes. Further phases of rock uplift might be triggered by cancelling deflection of the plate and slab window subduction, coupled with volcanic activity. Calculations of sediment accumulation rates reflect the different regional tectonic stages, and also show that the Malvinas Basin acted as a sediment catchment after the filling of the Austral Basin since the Late Miocene. However, although the Austral and Malvinas Basin are neighbouring basin systems that are sedimentary coupled in younger times, their earlier sedimentary and tectonic development was decoupled by the Rio Chico basement high. Thereby, the Austral Basin was affected by tectonic impacts of the Andes orogenesis, while the Malvinas Basin was rather affected by the opening of the South Atlantic.     

Late Quaternary stratigraphy,sedimentology and geochemistry of an underfilled lake basin in the Puna plateau (northwest Argentina)

Depositional models of ancient lakes in thin‐skinned retroarc foreland basins rarely benefit from appropriate Quaternary analogues. To address this, we present new stratigraphic, sedimentological and geochemical analyses of four radiocarbon‐dated sediment cores from the Pozuelos Basin (PB; northwest Argentina) that capture the evolution of this low‐accommodation Puna basin over the past ca. 43 cal kyr. Strata from the PB are interpreted as accumulations of a highly variable, underfilled lake system represented by lake‐plain/littoral, profundal, palustrine, saline lake and playa facies associations. The vertical stacking of facies is asymmetric, with transgressive and thin organic‐rich highstand deposits underlying thicker, organic‐poor regressive deposits. The major controls on depositional architecture and basin palaeogeography are tectonics and climate. Accommodation space was derived from piggyback basin‐forming flexural subsidence and Miocene‐Quaternary normal faulting associated with incorporation of the basin into the Andean hinterland. Sediment and water supply was modulated by variability in the South American summer monsoon, and perennial lake deposits correlate in time with several well‐known late Pleistocene wet periods on the Altiplano/Puna plateau. Our results shed new light on lake expansion–contraction dynamics in the PB in particular and provide a deeper understanding of Puna basin lakes in general.     

A flexural model for the Paradox Basin: implications for the tectonics of the Ancestral Rocky Mountains

The Paradox Basin is a large (190 km × 265 km) asymmetric basin that developed along the southwestern flank of the basement‐involved Uncompahgre uplift in Utah and Colorado, USA during the Pennsylvanian–Permian Ancestral Rocky Mountain (ARM) orogenic event. Previously interpreted as a pull‐apart basin, the Paradox Basin more closely resembles intraforeland flexural basins such as those that developed between the basement‐cored uplifts of the Late Cretaceous–Eocene Laramide orogeny in the western interior USA. The shape, subsidence history, facies architecture, and structural relationships of the Uncompahgre–Paradox system are exemplary of typical ‘immobile’ foreland basin systems. Along the southwest‐vergent Uncompahgre thrust, ～5 km of coarse‐grained syntectonic Desmoinesian–Wolfcampian (mid‐Pennsylvanian to early Permian; ～310–260 Ma) sediments were shed from the Uncompahgre uplift by alluvial fans and reworked by aeolian‐modified fluvial megafan deposystems in the proximal Paradox Basin. The coeval rise of an uplift‐parallel barrier ～200 km southwest of the Uncompahgre front restricted reflux from the open ocean south and west of the basin, and promoted deposition of thick evaporite‐shale and biohermal carbonate facies in the medial and distal submarine parts of the basin, respectively. Nearshore carbonate shoal and terrestrial siliciclastic deposystems overtopped the basin during the late stages of subsidence during the Missourian through Wolfcampian (～300–260 Ma) as sediment flux outpaced the rate of generation of accommodation space. Reconstruction of an end‐Permian two‐dimensional basin profile from seismic, borehole, and outcrop data depicts the relationship of these deposystems to the differential accommodation space generated by Pennsylvanian–Permian subsidence, highlighting the similarities between the Paradox basin‐fill and that of other ancient and modern foreland basins. Flexural modeling of the restored basin profile indicates that the Paradox Basin can be described by flexural loading of a fully broken continental crust by a model Uncompahgre uplift and accompanying synorogenic sediments. Other thrust‐bounded basins of the ARM have similar basin profiles and facies architectures to those of the Paradox Basin, suggesting that many ARM basins may share a flexural geodynamic mechanism. Therefore, plate tectonic models that attempt to explain the development of ARM uplifts need to incorporate a mechanism for the widespread generation of flexural basins.     

Climatically controlled lacustrine clinoforms: Theory and modelling results

Lacustrine basins and their deposits are good paleoclimate recorders and contain rich energy resources. Shelf-margin clinoforms do exist in deep lacustrine basins, but with striking differences from those in deep marine basins, caused by a correlation between the river-derived sediment supply and the lake level. This study uses empirical relationships to calculate the water and sediment discharge from rivers and coeval lake level during wet–dry cycles at 10 s of ky time scale. Sediment supply and lake-level changes are used for a stratigraphic forward model to understand how lacustrine clinoforms develop under different climate conditions. The results show that both wet and dry cycles can be associated with thick deep-water fan deposits, supporting the existing climate-driven lacustrine model proposed based on field data (e.g. Neogene Pannonian Basin and Eocene Uinta Basin). The wet period with high sediment supply and rising lake level creates the highly aggradational shelf, progradational slope and thick bottomset deposits. This is contrary from marine basin settings where the presence of rising shelf-margin trajectory commonly indicates limited deep-water fan deposits. This work suggests marine-based stratigraphic models cannot be directly applied to lacustrine basins.