Shallow velocity structure along the Hirapur–Mandla profile using traveltime inversion of wide-angle seismic data, and its tectonic implications

In order to investigate the velocity structure, and hence shed light on the related tectonics, across the Narmada–Son lineament, traveltimes of wide-angle seismic data along the 240 km long Hirapur–Mandla profile in central India have been inverted. A blocky, laterally heterogeneous, three-layer velocity model down to a depth of 10 km has been derived. The first layer shows a maximum thickness of the upper Vindhyans (4.5 km s⁻¹ ) of about 1.35 km and rests on top of normal crystalline basement, represented by the 5.9 km s⁻¹ velocity layer. The anomalous feature of the study is the absence of normal granitic basement in the great Vindhyan Graben, where lower Vindhyan sediments (5.3 km s⁻¹ ) were deposited during the Precambrian on high-velocity (6.3 km s⁻¹ ) metamorphic rock. The block beneath the Narmada–Son lineament represents a horst feature in which high-velocity (6.5 km s⁻¹ ) lower crustal material has risen to a depth of less than 2 km. South of the lineament, the Deccan Traps were deposited on normal basement during the upper Cretaceous period and attained a maximum thickness of about 800 m.     

The crustal structure of the eastern Marmara region, Turkey by teleseismic receiver functions

We study the crustal structure of eastern Marmara region by applying the receiver function method to the data obtained from the 11 broad-band stations that have been in operation since the 1999 İzmit earthquake. The stacked single-event receiver functions were modelled by an inversion algorithm based on a five-layered crustal velocity model to reveal the first-order shear-velocity discontinuities with a minimum degree of trade-off. We observe crustal thickening from west (29–32 km) to east (34–35 km) along the North Anatolian Fault Zone (NAFZ), but we observe no obvious crustal thickness variation from north to south while crossing the NAFZ. The crust is thinnest beneath station TER (29 km), located near the Black Sea coast in the west and thickest beneath station TAR (35 km), located inland in the southeast. The average crustal thickness and S -wave velocity for the whole regions are  31 ± 2  km and  3.64 ± 0.15 km s⁻¹  , respectively. The eastern Marmara region with its average crustal thickness, high heat flow value (101 ± 11 mW m⁻²) and with its remarkable extensional features seems to have a Basin and Range type characteristics, but the higher average shear velocities (∼3.64 km s⁻¹) and crustal thickening from 29 to 35 km towards the easternmost stations indicate that the crustal structure shows a transitional tectonic regime. Therefore, we conclude that the eastern Marmara region seems to be a transition zone between the Marmara Sea extensional domain and the continental Anatolian inland region.     

Ivrea seismic array: a study of continental crust and upper mantle

A seismic-array study of the continental crust and upper mantle in the Ivrea-Yerbano and Strona-Ceneri zones (northwestern Italy) is presented. A short-period network is used to define crustal P - and S -wave velocity models from earthquakes. The analysis of the seismic-refraction profile LOND of the CROP-ECORS project provided independent information and control on the array-data interpretation.
Apparent-velocity measurements from both local and regional earthquakes, and time-term analysis are used to estimate the velocity in the lower crust and in the upper mantle. The geometry of the upper-lower crust and Moho boundaries is determined from the station delay times.
We have obtained a three-layer crustal seismic model. The P -wave velocity in the upper crust, lower crust and upper mantle is 6.1±0.2 km s⁻¹, 6.5±0.3 km s⁻¹ and 7.8±0.3 km s⁻¹ respectively. Pronounced low-velocity zones in the upper and lower crust are not observed. A clear change in the velocity structure between the upper and lower crust is documented, constraining the petrological interpretation of the Ivrea-type reflective lower continental crust derived from small-scale petrophysical data. Moreover, we found a V _P/ V _S ratio of 1.69±0.04 for the upper crust and 1.82±0.08 for the lower crust and upper mantle. This is consistent with the structural and petrophysical differences between a compositionally uniform and seismically transparent upper crust and a layered and reflective lower crust. The thickness of the lower crust ranges from about 8 km in front of the Ivrea body (ARVO, Arvonio station) in the northern part of the array to a maximum of about 15 km in the southern part of the array. The lower crust reaches a minimum depth of 5 km below the PROV (Provola) station.     

Crust and upper mantle structure of the central Iberian Meseta (Spain)

Summary. Quarry blasts recorded along three lines on the central Iberian Meseta are used in an attempt to interpret the crustal structure. The results of the interpretation of the data, together with published surface wave and earthquake data, suggest a layered structure of the crust having the following features: the basement, in some areas covered by up to 4 km of sediments, has a P -velocity of 6.1 km s⁻¹; a low-velocity layer, between 7 and 11 km depth, seems to exist on the basis of both P and S interpretation of seismic data; a thick middle crust of 12 km has a P -velocity of 6.4 km s⁻¹ and overlies a lower crust with a mean P -velocity of 6.9 km s⁻¹ and a possible slight negative gradient; the mean v _p/ v _s ratio for the crust is about 1.75; the Moho is reached at about 31 km depth and consists of a transition zone at least 1.5 km thick. The P -velocity of the upper mantle is close to 8.1 km s⁻¹ and the S -velocity about 4.5 km s⁻¹, which gives a v _p /v _s ratio of 1.8 for the uppermost mantle. A tentative petrological interpretation of the velocities and composition of the layers is given.     

Joint inversion of receiver function and surface wave dispersion observations

We implement a method to invert jointly teleseismic P wave receiver functions and surface wave group and phase velocities for a mutually consistent estimate of earth structure. Receiver functions are primarily sensitive to shear wave velocity contrasts and vertical traveltimes, and surface wave dispersion measurements are sensitive to vertical shear wave velocity averages. Their combination may bridge resolution gaps associated with each individual data set. We formulate a linearized shear velocity inversion that is solved using a damped leastsquares scheme that incorporates a priori smoothness constraints for velocities in adjacent layers. The data sets are equalized for the number of data points and physical units in the inversion process. The combination of information produces a relatively simple model with a minimal number of sharp velocity contrasts. We illustrate the approach using noisefree and realistic noise simulations and conclude with an inversion of observations from the Saudi Arabian Shield. Inversion results for station SODA, located in the Arabian Shield, include a crust with a sharp gradient near the surface (shear velocity changing from 1.8 to 3.5 km s¹ in 3 km) underlain by a 5kmthick layer with a shear velocity of 3.5 km s¹ and a 27kmthick layer with a shear velocity of 3.8 km s¹, and an upper mantle with an average shear velocity of 4.7 km s¹. The crustmantle transition has a significant gradient, with velocity values varying from 3.8 to 4.7 km s¹ between 35 and 40 km depth. Our results are compatible with independent inversions for crustal structure using refraction data.     

Seismic anisotropy within the uppermost mantle of southern Germany

This paper presents an updated interpretation of seismic anisotropy within the uppermost mantle of southern Germany. The dense network of reversed and crossing refraction profiles in this area made it possible to observe almost 900 traveltimes of the P_n phase that could be effectively used in a time-term analysis to determine horizontal velocity distribution immediately below the Moho. For 12 crossing profiles, amplitude ratios of the P_n phase compared to the dominant crustal phase were utilized to resolve azimuthally dependent velocity gradients with depth. A P -wave anisotropy of 3–4 per cent in a horizontal plane immediately below the Moho at a depth of 30 km, increasing to 11 per cent at a depth of 40 km, was determined. For the axis of the highest velocity of about 8.03 km s⁻¹ at a depth of 30 km a direction of N31°F was obtained. The azimuthal dependence of the observed P_n amplitude is explained by an azimuth-dependent sub-Moho velocity gradient decreasing from 0.06 s⁻¹ in the fast direction to 0 s⁻¹ in the slow direction of horizontal P -wave velocity. From the seismic results in this study a petrological model suggesting a change of modal composition and percentage of oriented olivine with depth was derived.     

Crustal structure of the Whipple Mountains, southeastern California: a refraction study across a region of large continental extension

Summary. Closely spaced refraction profiling across the Whipple Mountains metamorphic core complex in southeastern California yields a complex picture of crustal structure in this region of large continental extension. A NE-directed profile, parallel to the extension direction, reveals a high-velocity mid-crustal layer (6.6–6.8 km s⁻¹) at 16-18 km depth, bounded above and below by laterally discontinuous low-velocity zones (<6.0 km s⁻¹). In marked contrast, a NW-directed profile shows a more uniform 6.0 km s⁻¹ crust down to the crust-mantle boundary. The apparent contrast between these two perpendicular profiles may be related not only to a more complex geologic structure in the NW-SE direction, but also to velocity anisotropy associated with mid-crustal mylonites. Despite the differences between the two refraction profiles, both define a flat Moho at 26-27 km depth with an associated upper mantle-velocity of 7.8 km s⁻¹. This observation is significant as it suggests that, although the amount of extension has been highly variable regionally, the crust is no thinner beneath the Whipple Mountains (where extension has been extreme) than the surrounding mountain ranges. Such an observation requires either that the crust was considerably thicker prior to extension, or that lateral flow in the lower crust and/or inflation of the crust via magmatism occurred contemporaneous with extension.     

Waveform modelling of teleseismic S, Sp, SsPmP, and shear-coupled PL waves for crust- and upper-mantle velocity structure beneath Africa

We describe a waveform modelling technique and demonstrate its application to determine the crust- and upper-mantle velocity structure beneath Africa. Our technique uses a parallelized reflectivity method to compute synthetic seismograms and fits the observed waveforms by a global optimization technique based on a Very Fast Simulated Annealing (VFSA). We match the S , Sp, SsPmP and shear-coupled PL phases in seismograms of deep (200–800 km), moderate-to-large magnitude (5.5–7.0) earthquakes recorded teleseismically at permanent broad-band seismic stations in Africa. Using our technique we produce P - and S -wave velocity models of crust and upper mantle beneath Africa. Additionally, our use of the shear-coupled PL phase, wherever observed, improves the constraints for lower crust- and upper-mantle velocity structure beneath the corresponding seismic stations. Our technique retains the advantages of receiver function methods, uses a different part of the seismogram, is sensitive to both P - and S -wave velocities directly, and obtains helpful constraints in model parameters in the vicinity of the Moho. The resulting range of crustal thicknesses beneath Africa (21–46 km) indicates that the crust is thicker in south Africa, thinner in east Africa and intermediate in north and west Africa. Crustal P - (4.7–8 km s⁻¹) and S -wave velocities (2.5–4.7  km s⁻¹) obtained in this study show that in some parts of the models, these are slower in east Africa and faster in north, west and south Africa. Anomalous crustal low-velocity zones are also observed in the models for seismic stations in the cratonic regions of north, west and south Africa. Overall, the results of our study are consistent with earlier models and regional tectonics of Africa.     

Deep seismic soundings along Hirapur-Mandla profile, central India

Summary. The crustal depth section along Hirapur-Mandla profile has been computed in two steps from Deep Seismic Sounding (DSS) data. The shallow section up to the crystalline basement is derived by inverting first arrival refraction travel times. The upper Vindhyan sediments (velocity 4.5 km s⁻¹) have a maximum thickness of about 1.5 km at Bakshaho. The lower Vindhyan sediments (velocity 5.4 km s⁻¹) were deposited north of Narmada-Son lineament between Katangi and Narsinghgarh in a graben developed in crystalline basement. The thickness of the lower Vindhyans increases from north to south towards Katangi and the depth to the basement reaches 5.5 km near Jabera. The depth to the Moho boundary varies from 39.5 km near Tikaria to 45 km at Narsinghgarh. The narrow block between Katangi and Jabalpur forms a horst feature which represents the Narmada-Son lineament forming the southern boundary of the Vindhyan basin. Two-dimensional ray tracing was performed generating travel time curves from various shot points which were matched with observed travel time data.     

Seismic and electromagnetic evidence of dehydration as a free water source in the reactivated crust

According to recent estimates, the continental mid-crust contains 35–40 per cent amphibolites. Heating of the crust by an underlying mantle plume, for example beneath continental rifts, high plateaus, and areas of intraplate volcanic activity, releases water. Dehydration of amphibole-bearing rocks at depths of 20–40  km occurs mainly in the temperature range 650–700 °C, and this releases about 0.4  wt per cent of water.
  Seismic tomography studies of the crust in the Kirgyz Tien Shan Range, where the age of the tectonic activity is less than 30  Ma, revealed a low-velocity zone in the mid-crust. The velocity of P waves was 0.4  km  s⁻¹ lower than in normal crust. MT sounding data in the region show the existence of a low-resistivity layer with an average resistivity of about 25  Ω  m at the depth of the low-velocity layer. The spatial correlation of the observed anomalous layers and calculated effect of fluid phase on seismic and electric parameters of rocks suggests the presence of aqueous fluids released by the heating of the mid-crust.     

Crustal model of the Bransfield Rift, West Antarctica, from detailed OBS refraction experiments

The first detailed deep seismic refraction study in the Bransfield Strait, West Antarctica, using sensitive OBSs (ocean bottom seismographs) was carried out successfully during the Antarctic summer of 1990/1991. The experiment focused on the deep crustal structure beneath the axis of the Bransfield Rift. Seismic profile DSS-20 was located exactly in the Bransfield Trough, which is suspected to be a young rift system. Along the profile, five OBSs were deployed at spacings of 50-70 km. 51 shots were fired along the 310 km profile. This paper gives the first presentation of the results. A detailed model of the crustal structure was obtained by modelling the observed traveltimes and amplitudes using a 2-D ray-tracing technique. The uppermost (sedimentary?) cover, with velocities of 2.0-5.5 km s⁻¹, reaches a depth of up to 8 km. Below this, a complex with velocities of 6.4-6.8 km s⁻¹ is observed. The presence of a high-velocity body, with V _p= 7.3-7.7 km s⁻¹, was detected in the 14-32 km depth range in the central part of the profile. These inhomogeneities can be interpreted as a stage of back-arc spreading and stretching of the continental crust, coinciding with the Deception-Bridgeman volcanic line. Velocities of 8.1 km s⁻¹, characteristic of the Moho, are observed along the profile at a depth of 30-32 km.     

Transitional continental–oceanic structure beneath the Norwegian Sea from inversion of surface wave group velocity data

We have analysed the fundamental mode of Love and Rayleigh waves generated by 12 earthquakes located in the mid-Atlantic ridge and Jan Mayen fracture zone. Using the multiple filter analysis technique, we isolated the Rayleigh and Love wave group velocities for periods between 10 and 50  s. The surface wave propagation paths were divided into five groups, and average group velocities calculated for each group. The average group velocities were inverted and produced shear wave velocity models that correspond to a quasi-continental oceanic structure in the Greenland–Norwegian Sea region. Although resolution is poor at shallow depth, we obtained crustal thickness values of about 18  km in the Norwegian Sea area and 9  km in the region between Svalbard and Iceland. The abnormally thick crust in the Norwegian Sea area is ascribed to magmatic underplating and the thermal blanketing effect of sedimentary layers. Maximum crustal shear velocities vary between 3.5 and 3.9  km  s⁻¹ for most paths. An average lithospheric thickness of 60  km was observed, which is lower than expected for oceanic-type structure of similar age. We also observed low shear wave velocities in the lower crust and upper mantle. We suggest that high heat flow extending to depths of about 30  km beneath the surface can account for the thin lithosphere and observed low velocities. Anisotropy coefficients of 1–5 per cent in the shallow layers and >7 per cent in the upper mantle point to the existence of polarization anisotropy in the region.     

An anomalous high-velocity layer at shallow crustal depths in the Narmada zone, India

The Narmada zone in central India is a zone of weakness that separates the region of Vindhyan (Meso-Neoproterozoic) deposition to the north from Gondwana (Permo-Carboniferous–lower Cretaceous) deposits to the south. The reinterpretation of analogue seismic refraction data, acquired during the early 1980s, using 2-D ray-tracing techniques reveals a basement (velocity 5.8–6.0 km s⁻¹ ) topography suggesting that the Narmada zone, bounded by the Narmada North and Narmada South faults is a region of basement uplift. A layer of anomalously high velocity (6.5–6.7 km s⁻¹ ) at depths between 1.5 and 9.0 km appears to be present in the entire region. Within the Narmada zone this layer occurs at shallower depths than outside the Narmada zone. At two places within the Narmada zone this layer is at a depth of about 1.5 km. This layer cannot be considered as the top of the lower crust because in this case it should have produced large positive gravity anomalies at the shallowest parts. Instead, these parts correspond to Bouguer gravity lows. Furthermore, lower crust at such shallow depths has not been reported from any other part of the Indian shield. Therefore, this layer is likely to represent the top of a high-velocity mafic body that has different thicknesses in different places.     

Crustal and upper mantle structure of the northwestern North Island, New Zealand, from seismic refraction data

The crustal and upper mantle structure of the northwestern North Island of New Zealand is derived from the results of a seismic refraction experiment; shots were fired at the ends and middle of a 575 km-long line extending from Lake Taupo to Cape Reinga. The principal finding from the experiment is that the crust is 25 ± 2 km thick, and is underlain by what is interpreted to be an upper mantle of seismic velocity 7.6 ± 0.1 km s⁻¹, that increases to 7.9 km s⁻¹ at a depth of about 45 km. Crustal seismic velocities vary between 5.3 and 6.36 km s⁻¹ with an average value of 6.04 km s⁻¹. There are close geophysical and geological similarities between the north-western North Island of New Zealand and the Basin and Range province of the western United States. In particular, the conditions of low upper-mantle seismic velocities, thin crust with respect to surface elevation, and high heat-flow (70–100 mW m⁻²) observed in these two areas can be ascribed to their respective positions behind an active convergent margin for about the past 20 Myr.     

Velocity structure of upper-mantle transition zones beneath central eurasia from seismic inversion using genetic algorithms

We present velocity constraints for the upper-mantle transition zones beneath Central Siberia based on observations of the 1982 RIFT Deep Seismic Sounding (DSS) profile. The data consist of seismic recordings of a nuclear explosion in north-western Siberia along a 2600 km long seismic profile extending from the Yamal Peninsula to Lake Baikal. We invert seismic data from the mantle transition zones using a non-linear inversion scheme using a genetic algorithm for optimization and the WKBJ method to compute the synthetic seismograms. A statistical error analysis using a graph-binning technique was performed to provide uncertainty values in the velocity models.
Our best model for the upper-mantle velocity discontinuity near 410 km depth has a two-stage velocity-gradient structure, with velocities increasing from 8.70–9.25 km s⁻¹ over a depth range of 400–415 km, a gradient of 0.0433 s⁻¹, and from 9.25–9.60 km s⁻¹ over a depth range of 415–435 km, a gradient of 0.0175 s⁻¹. This derived model is consistent with other seismological observations and mineral-physics models. The model for the velocity discontinuity near 660 km depth is simple, sharp and includes velocities increasing from 10.15 km s⁻¹ at 655 km depth to 10.70 km s⁻¹ at 660 km depth, a gradient of 0.055 s⁻¹.     

Upper crustal shear velocity models from higher mode Rayleigh wave dispersion in Scotland

Summary. Group velocities for first and second higher mode Rayleigh waves, in the frequency range 0.8–4.8 Hz, generated from a local earthquake of magnitude 3.7 M _L in western Scotland, are measured at stations along the 1974 LISPB line. These provide detailed information about the crustal structure west of the line. The data divide the region into seven apparently homogeneous provinces. Averaged higher mode velocity dispersion curves for each province are analysed simultaneously using a linearized inversion technique, yielding regionalized shear velocity profiles down to a depth of 17 km into the upper crust. Shear wave velocity is between 3.0 and 3.4 km s⁻¹ in the upper 2 km, with a slow increase to around 3.8 km s⁻¹. P -wave models computed using these results agree with profiles from the LISPB and LUST refraction experiments.     

Analysis of the crustal velocity structure of the British Isles using teleseismic receiver functions

The onshore crustal and upper mantle velocity structure of the British Isles has been investigated by teleseismic receiver function analysis. The results of the study augment the dense offshore and sparse onshore models of the velocity structure beneath the area. In total almost 1500 receiver functions have been analysed, which have been calculated using teleseismic data from 34 broadband and short-period, three-component seismic recording instruments. The crustal structure has primarily been investigated using 1-D grid search and forward modelling techniques, returning crustal thicknesses, bulk crustal V_p / V_s ratio and velocity-depth models. H −κ stacking reveals crustal thicknesses between 25 and 36 km and V_p / V_s ratios between 1.6 and 1.9. The crustal thicknesses correlate with the results of previous seismic reflection and refraction profiles to within ±2 km. The significant exceptions are the stations close to the Iapetus Suture where the receiver function crustal thicknesses are up to 5 km less than the seismic refraction Moho. This mismatch could be linked to the presence of underplated magmatic material at the base of the crust. 1-D forward modelling has revealed subcrustal structures in northern Scotland. These correlate with results from other UK receiver function studies, and correspond with the Flannan and W-reflectors. The structures are truncated or pinch out before they reach the Midland Valley of Scotland. The isolated subcrustal structure at station GIM on the Isle of Man may be related to the closure of the Iapetus Ocean.     

The seismic structure of thinned continental crust in the northern Bay of Biscay

Summary. The stretching and thinning of the continental crust, which occurs during the formation of passive continental margins, may cause important changes in the velocity structure of such crust. Further, crust attenuated to a few kilometres' thickness, can be found underlying 'oceanic' water depths. This paper poses the question of whether thinned continental crust can be distinguished seismically from normal oceanic crust of about the same thickness. A single seismic refraction line shot over thinned continental crust as part of the North Biscay margin transect in 1979 was studied in detail. Tau— p inversion suggested that there are differences between oceanic and continental crust in the lower crustal structure. This was confirmed when synthetic seismograms were calculated. The thinned continental crust (β± 7.0) exhibits a two-gradient structure in the non-sedimentary crust with velocities between 5.9 and 7.4 km s⁻¹; an upper 0.8 s⁻¹ layer overlies a 0.4 s⁻¹ layer. No layer comparable to oceanic layer 3 was detected. The uppermost mantle also contains a low-velocity zone.     

The Agulhas Plateau: structure and evolution of a Large Igneous Province

Large Igneous Provinces (LIP) are of great interest due to their role in crustal generation, magmatic processes and environmental impact. The Agulhas Plateau in the southwest Indian Ocean off South Africa has played a controversial role in this discussion due to unclear evidence for its continental or oceanic crustal affinity. With new geophysical data from seismic refraction and reflection profiling, we are able to present improved evidence for its crustal structure and composition. The velocity–depth model reveals a mean crustal thickness of 20 km with a maximum of 24 km, where three major units can be identified in the crust. In our seismic reflection records, evidence for volcanic flows on the Agulhas Plateau can be observed. The middle crust is thickened by magmatic intrusions. The up to 10 km thick lower crustal body is characterized by high seismic velocities of 7.0–7.6 km s⁻¹. The velocity–depth distribution suggests that the plateau consists of overthickened oceanic crust similar to other oceanic LIPs such as the Ontong-Java Plateau or the northern Kerguelen Plateau. The total volume of the Agulhas Plateau was estimated to be 4 × 10⁶ km³ of which about 10 per cent consists of extruded igneous material. We use this information to obtain a first estimate on carbon dioxide and sulphur dioxide emission caused by degassing from this material. The Agulhas Plateau was formed as part of a larger LIP consisting of the Agulhas Plateau itself, Northeast Georgia Rise and Maud Rise. The formation time of this LIP can be estimated between 100 and 94 (± 5) Ma.     

Detailed S-wave structure in the Dublin Basin and its northern margin

Summary. The seismic structure has been measured to a depth of about 3 km along a 30 km seismic profile in east central Ireland. This profile is unusual in that it is the S -wave velocity—depth structure that has been measured to a degree of precision more normally associated with P -wave results. One reason for this is that the sources used were quarry blasts which generated strong S -waves and short-period surface waves but rather weak P -waves.
The results show a layer of Carboniferous limestone with shear velocity 2.65 km⁻¹ s overlying a layer with a velocity of 3.06 km s⁻¹. This second layer was interpreted as Lower Palaeozoic strata (Silurian/Ordovician) since this velocity was evident in an inlier seen at the surface at the northern end of the line. A third refraction horizon, shear velocity 3.45 km s⁻¹ and displaying a basinal structure, was also recognized. This may be Cambrian or Precambrian basement.