Geophysical interpretation of a high-resolution seismic refraction profile in the Northern Apennines

A combined seismic and gravimetric interpretation in the Northern Apennines area (Italy) is presented. To the knowledge of the authors, this is one of the few attempts to apply tomographic methodology to a seismic refraction profile. This procedure, together with the classical interpretation for defining lower reflectors, led to the formulation of quite an accurate model of the upper crust. A gravity analysis was performed concurrently taking into account the seismic results at different depths which correspond to different frequency domains in the gravity signal. While the medium- and high-frequency patterns have been solved by trial-and-error, the regional trend has been modelled applying the collocation procedure to the gravity data.     

Segmented, curved faults: the example of the Balduini Thrust Zone, Northern Apennines, Italy

Meso- and micro-structural studies of the well-exposed Balduini Thrust (Northern Apennines, Italy) indicate that the structure formed during a single folding event, contemporaneous with diagenesis, and is a zone comprising curved, en-échelon fault segments. The geometry of each segment is arcuate with pure compression at one end and right-lateral displacement along the other. The thrust developed during the Tortonian within a single mud-rich formation, the Upper Eocene–Upper Oligocene Scaglia Cinerea, but rheological variations within the unit led to differences in deformation style; zones of scaly fabric are discontinuous and calcite veins vary in abundance. The mesoscopic morphology of the veins and the distribution of calcium carbonate along the formation indicate variations in the distribution of fluids at the time of deformation, which affected both diagenesis and the structural response of the material. Systematic variations of mechanical properties within the thickness of the Scaglia Cinerea Formation account for the curvature of the propagating thrust. Together with the heterogeneity of the stress field, the confinement of the arcing thrust to this single, weak unit lead to repeated initiation of new fractures and hence segmentation of the propagating thrust. Geometric analysis of the calcite veins and their microscopic characters suggests that hydrofracturing was involved, with the Scaglia Cinerea Formation experiencing high fluid pressure followed by rapid water expulsion. The Balduini Thrust is therefore an example of a fluid-driven, refracted compound shear zone. The analysis presented here provides insights into the three-dimensional arrangement of fault zones and fluid-migration patterns during regional faulting.     

Considerations on the seismotectonics of the Northern Apennines

The Northern Apennines have been subdivided into homogeneous zones, on the basis of recent structural evolution and crustal structure, in which the earthquake distribution can find a coherent framework. These zones, whose physiography is in strict connection with their structure, are: the Internal Peri-Tyrrhenian Belt; the External or Main Belt; the Buried Belt; and the Pede-Alpine Homocline. Earthquake activity has a tendency to cluster along well-defined bands, particularly in the easternmost border of the Peri-Tyrrhenian Belt, as well as along the zone between the External Belt and the Buried Belt, i.e. along the Padanian margin of the Northern Apennines.A minimum of seismic activity seems to be correlated with some zones of the External Belt, as well as with the Late Tertiary and Quaternary magmatic province of Tyrrhenian Southern Tuscany.The fault-plane solutions are coherent with the structural picture.A tentative seismotectonic model of the Northern Apennines is discussed.     

Ancient synsedimentary structural control on thrust ramp development: an example from the Northern Apennines, Italy

The Umbria-Marche-Sabina foreland fold and thrust belt (Northern Apennines, Italy) provides excellent test-cases for the hypothesis of ancient syndepositional structural features controlling thrust ramp development. The sedimentary cover, Late Triassic to Miocene in age, is made of platform and pelagic carbonates, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly during the Jurassic and the Late Cretaceous-Palaeogene, determined sensible lateral thickness variations within the relative sequences. By late Miocene the sedimentary cover was detached from its basement along a mainly evaporitic horizon, and was deformed by means of eastward-verging folds and thrusts.
In order to locate the points where thrust ramps branch-off the basal detachment, both line-length and equal-area techniques were used in the construction of a balanced cross-section through three major fault-related folds in southeastern Umbria. The nucleation of thrust ramps was controlled by the occurrence of Jurassic and Cretaceous-Palaeogene synsedimentary normal faults. These interrupted the lateral continuity of the evaporitic unit (the Late Triassic Anidriti di Burano Fm.) at the base of the sedimentary cover, and acted as obstacles to the eastward propagation of the thrust system, giving rise to major folds which originated from tip-line folding processes.
Therefore, the inferred relationships between ancient normal faults and late thrusts indicate that synsedimentary tectonic structures and the related lateral stratigraphic variations can be envisaged as mechanically important perturbations, which effectively control the nucleation and development of thrust ramps.     

Soil baseline geochemistry and plant response in areas of complex geology. Application to NW Euboea,Greece

A soil and vegetation survey was undertaken in NW Euboea Island, Greece. The objectives of the study were to establish the geochemical baseline of soil and identify the impact of local geology on threshold values of potentially harmful elements. The studied area is characterized by complex geology comprising metamorphic and ultramafic rocks as well as active hot springs. A total of 117 soil samples were collected from 89 sites at depths of 0–25 cm and 25–50 cm. Eighteen vegetation samples were also collected representing prevalent indigenous perennial species in the region. Soil samples from the present study were enriched in As, Ca, Cu, Mg, Ni with concentrations reaching 233 mg/kg, 38%, 336 mg/kg, 10.8%, 1560 mg/kg respectively. Factor analysis revealed three main factors controlling the chemical composition of soil reflecting the influence of ultramafic rocks (Cr, Ca, Mg, Ni), hot spring deposits (Ca, S, Sr, As) and paedogenesis processes (Fe, Co, V, Mn, Al). The first two of these factors showed significant spatial correlation with the geological features within the study area. Subsequently, baseline concentrations based on statistical and spatial data were estimated within sub-areas reflecting the influence of local geology in soil composition. Concentrations of potentially harmful elements in the plant tissues of indigenous perennial vegetation species showed a wide range of variation from below the detection limit up to 1700 mg/kg for Ni in the hyperaccumulator Alyssum chalcidicum demonstrating that plant species have adapted to the stressful conditions caused by high elemental concentrations in soil. The results of this study can be utilized in future studies at areas of similar geology by providing an objective basis for setting realistic threshold values for pollution assessment and remediation.     

Radiocarbon Data on Lateglacial and Holocene Landslides in the Northern Apennines

The Emilia Romagna slope of the Northern Apennines is strewnwith over 32,000 landslides, 5,000 of which are larger than 1 million cubic metres. They representthe remains of geomorphic agents that shaped the Apennines during the Holocene. Dating themby means of radiocarbon methods adds a contribution to the knowledge about the last periodof the geological geomorphological history of the Apennines. They can also be used to examinethe influence of Quaternary climatic changes on the instability of slopes and, for practicalor planning functions, to assess the periodicity of activity phases of the landslides. Thedating has been carried out on wood remnants buried under the landslide bodies. In some cases theentire tree trunk was found.In this paper we present radiocarbon dating of 20 casestudies in the Northern Apennines. Results range approximately from 13790–13670 cal y BP to950–790 cal`y BP. The oldest case is that of the Morsiano earth-flow, while the younger datedevent is represented by the Marano case that represents an example of how radiometric analysescan further enhance the available historical data. In the Cavola case, wood remnants of different ageswere found at different depths (from 9 to 45 m), allowing the dating of the first and followingperiods of activity of the landslide. The results are discussed and some considerations on the correlationbetween landslide occurrence and Holocene climate changes are proposed.     

陆内裂陷盆地的复式断陷结构类型及其油气地质意义:以海-塔盆地早白垩世盆地为例

陆内裂陷盆地通常发育大量地堑、半地堑,盆地结构和构造样式受盆地内部地堑、半地堑的叠加与复合方式的影响。文中将由多条断层、不同期次的断层共同控制的断陷称为"复式断陷"。依据同一时期断陷复合构成的盆地结构可以将复式断陷划分为串联式、并联式、斜列式和交织式等4种复合型式,依据不同时期断陷叠加构成的盆地样式可以划分为继承型、利用型、新生型3种叠加类型。海-塔盆地在早白垩世最初是发育大量相对分隔的小型地堑、半地堑,随着地壳渐进的伸展构造变形,多个同期小型半地堑复合在一起形成相对大的断陷(相当于铜钵庙组沉积期)。在早白垩世中期(相当于南屯组沉积期),新发育的断陷叠置在早先发育的断陷之上,最终形成了盆地中的17个区域规模的复式断陷。海-塔盆地早白垩世的断陷复合和叠加过程直接影响沉积盆地的油气成藏条件。并联式、交织式复合和继承型、利用型叠合形成的复式断陷有利于优质烃源岩的发育,断陷复合过程中的构造变换带有利于优质储集层的发育,长期活动的基底断裂及相关构造带有利于形成含油气构造带。     

Topographic expression of active faults in the foothills of the Northern Apennines

Active faults that rupture the earth's surface leave an imprint on the topography that is recognized using a combination of geomorphic and geologic metrics including triangular facets, the shape of mountain fronts, the drainage network, and incised river valleys with inset terraces. We document the presence of a network of active, high-angle extensional faults, collectively embedded in the actively shortening mountain front of the Northern Apennines, that possess unique geomorphic expressions. We measure the strain rate for these structures and find that they have a constant throw-to-length ratio. We demonstrate the necessary and sufficient conditions for triangular facet development in the footwalls of these faults and argue that rock-type exerts the strongest control. The slip rates of these faults range from 0.1 to 0.3 mm/yr, which is similar to the average rate of river incision and mountain front unroofing determined by corollary studies. The faults are a near-surface manifestation of deeper crustal processes that are actively uplifting rocks and growing topography at a rate commensurate with surface processes that are eroding the mountain front to base level.     

Mud volcano eruptions and earthquakes in the Northern Apennines and Sicily, Italy

The relations between earthquakes and the eruption of mud volcanoes have been investigated at the Pede–Apennine margin of the Northern Apennines and in Sicily. Some of these volcanoes experienced eruptions or increased activity in connection with historical seismic events, showing a good correlation with established thresholds of hydrological response (liquefaction) to earthquakes. However, the majority of eruptions have been documented to be independent of seismic activity, being mud volcanoes often not activated even when the earthquakes were of suitable magnitude and the epicentre at the proper distance for the triggering. This behaviour suggests that paroxysmal activity of mud volcanoes depends upon the reaching of a specific critical state dictated by internal fluid pressure, and implies that the strain caused by the passage of seismic waves can activate only mud volcanoes in near-critical conditions (i.e., close to the eruption). Seismogenic faults, such as the Pede–Apennine thrust, often structurally control the fluid reservoirs of mud volcanoes, which are frequently located at the core of thrust-related folds. Such an intimate link enables mud volcanoes to represent features potentially suitable for recording perturbations associated with the past and ongoing tectonic activity of the controlling fault system.     

The coalification pattern in the Northern Apennines and its palaeogeothermic and tectonic significance

The rocks of the Northern Apennines predominantly consist of non-metamorphic terrigeneous deposits (flysches and molasses) some of which are preorogenic, some synorogenic and others postorogenic with respect to the nappe tectonics (Miocene). As plant fragments frequently occur in these sediments, a study of coal rank based on reflectance measurements on vitrinites (% Rm = mean value of the random reflectance in non polarized light) contributes to the clarification of the relation between the orogenic and the palaeogeothermal development. The determination of the Rm values of more than 180 samples from outcrops and three deep drillings revealed some important features. Within the pile of Liguride and Tuscanide nappes, the coal rank increases from the uppermost nappe to the lower nappes until lowgrade metamorphism is reached in the Lower Tuscanides. In the single nappes the rank decreases from the Tyrrhenian coast (internal zone) towards the Po Plain (external zone). This regional trend is disturbed only locally by young post-coalification tectonics. In the uppermost Liguride nappe (M. Antola Unit) a pre-Oligocene (i. e. pre-Apenninic) thermal event was detected. Postorogenic heating is connected with the magmatic activity of Late Miocene to Pleistocene age in Tuscany. Except for these preorogenic and postorogenic thermal events, the main coalification is generally younger than the emplacement of the nappes in the nappe pile during the Apenninic orogeny in the Miocene, but it is older than the last thrust movements and the final tensional tectonics in the internal zones of the chain. For these reasons, the main regional thermal event has to be considered as synorogenic or, more precisely, as late-synorogenic.     

Environmental geology in loess areas of China

There are several unfavorable geological hazards in the loess area of China. The major purposes of environmental geology studies in this region are to expound the causes of these hazards and to determine treatments. Geological hazards include endemic diseases, depletion of groundwater, land subsidence, ground fissures, soil erosion, and collapsibility of loess. This article is a summary of studies regarding these hazards. Keshan disease and Kaschin-Beck disease, for example, can be prevented and cured by adding selenates to table salt. Ponds can be constructed on the loess plateau and dikes around farmlands to collect rainfall to recharge groundwater resources. Excess extraction of groundwater is the major cause of land subsidence. Ground fissures in Xi'an are primarily caused by tectonics, but over-extraction of ground-water strengthens its activity. Observation stations should be established in order to forecast and prevent landslides. Planting trees in a regional shelterbelt is the primary measure necessary to prevent soil erosion. As a result of these geological studies, valuable experience in preventing collapse of loess in China has been gained.     

Petrography and arrangement of Tertiary graywacke and sandstone sequences of the Northern Apennines

In order to obtain new sedimentological data for a better understanding of the palaeo geological assembly of the various sedimentary and tectonic complexes of the Northern Apennines, the authors have re-examined and re-analysed the petrography of the main Tertiary graywacke and sandstone sequences of this mountain range. Several hundred thin sections and heavy-mineral preparations have been studied qualitatively and quantitatively. Generally, for all investigated graywackes and sandstones a source area with a more or less uniform petrographic organization can be assumed, since all different components, though in variable distributions, occur in all the studied sequences. Differences in the abundance of the components in the individual graywackes and sandstones are attributable to influences of the source area itself. The distribution of quartz-poor or quartz-free volcanic rocks, quartz—epidote—zoisite schists, and carbonatic cement in the samples and epidote and zoisite in the heavy-mineral preparations indicate, however, a certain palaeogeological succession of the original areas of deposition from the internal to the external parts of the mountain range.     

Reflection–refraction seismics in the Gulf of Corinth: hints at deep structure and control of the deep marine basin

The Gulf of Corinth is a natural laboratory for the study of seismicity and crustal deformation during continental extension. Seismic profiling along its axis provides a 24-fold normal-incidence seismic reflection profile and wide-angle reflection–refraction profiles recorded by sea-bottom seismometers (OBS) and land seismometers. At wide-angle incidence, the land receivers document the Moho at 40-km depth under the western end of the Gulf north of Aigion, rising to 32-km depth under the northern coast in the east of the Gulf. Both refraction and normal-incidence reflection sections image the basement under the deep marine basin that has formed by recent extension. The depth to the base of the sedimentary basin beneath the Gulf, constrained by both methods, is no more than 2.7 km, with 1 km of water underlain by no more than 1.7 km of sediment, less than what was expected from past modeling of uplift of the south coast in the East of the Gulf. Unlike the flat sea-bottom, the basement and sedimentary interfaces show topography along this axial line. Several deeps are identified as depocenters, which suggest that this axial line is not a strike line to the basin. It appears instead to be controlled by several faults, oblique to the S60°E overall trend of the south coast of the Gulf, their more easterly strikes being consistent with the instantaneous direction of extension measured by earthquake slip vectors and by GPS.     

Porcellanite and the urban geology of Darwin,Northern Territory

Porcellanite is a siliceous duricrust which has developed within altered Cretaceous mudrocks in the Darwin city area and is well exposed in coastal cliffs to the north. Its distinctive geotechnical properties include low bulk density, variable strength that is highly dependent on moisture content, and relatively high (but inconsistent) durability. The porcellanite rock mass is inhomogeneous and anisotropic; it is unrippable at the surface, but becomes weaker with depth. It is also highly permeable in places, even karst‐like, due to solution cavities. These characteristics are common to all duricrusts and result from processes of solution, replacement and redeposition by silica‐laden groundwater. Such processes may have been intermittently active through most of the Cenozoic and there is evidence that they continue to the present. The upper 2–4 m of the porcellanite profile is made up of a brittle, high‐strength rock with a silica content approaching that of silcrete. The underlying altered and porous siltstone is much weaker and deforms plastically under loading, due to a cellular microfabric composed largely of opaline silica replacing clay minerals. Porcellanite has long been used as the main building stone in Darwin and is now quarried for shoreline filling. Although some of it is of select fill or road sub‐base quality, crushed porcellanite contains an excess of plastic fines making it unsuitable for basecourse. Porcellanite has been a failure as breakwater stone, despite producing blocks of adequate size.     

South Australian geology and the State Heritage Register: an example of geoconservation of the Naracoorte Caves complex and karst environment

South Australia’s State Heritage Register contains 2294 listed places, the majority of which are from the ‘Built’ environment, ranging from settlers’ huts, community buildings, historical industrial sites to magnificent stone mansions. Only 96 places are linked to the ‘Natural’ environment. The Register listings protect heritage places from alteration, damage or removal without formal prior consultation, compulsory under the South Australian Development Act. ‘Natural’ environments are landscape-based and oriented towards Geological, Archaeological, Palaeontological and Speleological heritage (‘GAPS heritage’). A process to provide a greater balance between ‘Natural’ and ‘Built’ listings has initiated a series of State Heritage ‘Natural’ environment assessments, mostly of single sites. Two individual caves in the Naracoorte Caves National Park are already entered in the State Heritage Register as single sites. However, an innovative broader multiple-site nomination has focused on the many different but significant GAPS features contained within the 25 caves of the Naracoorte Caves National Park, providing a further level of protection for the land and the caves’ exteriors and interiors. The example of the Naracoorte Caves draws attention to the number of important land and coastal karst (limestone) features across South Australia that were generated by steady geological uplift of three large sections of Oligocene–Miocene limestone—the Nullarbor Plain, the Murray Basin and the Gambier Karstfield (which includes Naracoorte and Mount Gambier), resulting in specific karst forms worthy of a broader coordinating management approach across South Australian karst parks.     

Intra‐messinian gypsum palaeokarst in the Northern Apennines and its palaeogeographic implications

A short intra‐Messinian continental period has been recognised in some North Italian gypsum areas, mostly under the form of palaeokarst deposits. This emersion appears to have occurred only locally, and is explained as caused by the intra‐Messinian tectonic phase and a major sea level lowering. Evidences of this palaeokarst are mostly small, although at some places the palaeontological content of its fillings is of great importance. The discovery near Zola Predosa (Bologna) of a new intra‐Messinian extensive karst system and of its infilling sheds new light on the importance of this karst episode.     

Recent and active tectonics of the external zone of the Northern Apennines (Italy)

We present a comprehensive study of the recent and active tectonics of the external part of the Northern Apennines (Italy) by using morphotectonic, geological–structural, and stratigraphic analysis, compared with the current seismicity of the region. This analysis suggests that the external part of the Northern Apennines is characterised by presence of three major systems of Quaternary compressive structures corresponding to (1) the Apenninic watershed, (2) the Apennines–Po Plain margin (pede-Apenninic thrust front), and (3) the Emilia, Ferrara, and Adriatic Fold systems buried below the Po Plain. Geological data and interpreted seismic sections indicate a roughly N–S Quaternary deformation direction, with rates <2.5 mm/year. The shortening decreased since the Pliocene, when our data indicate compression in a NNW–SSE direction and rates up to 7 mm/year. The trend and kinematics of the structures affecting the Apennines–Po Plain margin and the Po Plain subsoil fit well the pattern of the current seismicity of the area, as well as recent GPS and geodetic levelling data, pointing to a current activity of these thrust systems controlled by an overall compressive stress field. Close to the Apenninic watershed, earthquake focal mechanisms indicate that shallow extension is associated to deep compression. The extensional events may be related to a secondary extensional stress field developing on the hangingwall of the thrust system affecting the Apenninic watershed; alternatively, this thrust system may have been recently deactivated and overprinted by active normal faulting. Deeper compressive events are related to the activity of both a major basement thrust that connects at surface with the pede-Apenninic thrust front and a major Moho structure.     

The effects of pre-existing normal faults on thrust ramp development: An example from the northern Apennines,Italy

The Umbria-Marche foreland fold-and-thrust belt in the northern Apennines of Italy provides excellent evidence to test the hypothesis of synsedimentary-structural control on thrust ramp development. This orogenic belt consists of platform and pelagic carbonates, Late Triassic to Miocene in age, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly active from Jurassic through Late Cretaceous-Paleogene time, resulted in significant lateral thickness variability within the related stratigraphic sequences. By Late Miocene time the sedimentary cover was detached from the underlying basement and was deformed by east-verging folds and west-dipping thrusts. Two restored balanced cross sections through the southernmost part of the belt show a coincidence between the early synsedimentary normal faults and the late thrust fault ramps. These evidences suggest that synsedimentary tectonic structures, such as faults and the related lithological lateral changes, can be regarded as mechanically important controlling factors in the process of thrust ramp development during positive tectonic inversion processes.     

Differential Hydrogeological Effects of Draining Tunnels Through the Northern Apennines,Italy

Water inflows are a major challenge in tunnelling and particularly difficult to predict in geological settings consisting of heterogeneous sedimentary rock formations with complex tectonic structure. For a high-speed railway line between Bologna and Florence (Italy), a series of seven railway tunnels was drilled through turbiditic formations, ranging from pelitic rocks with thin arenitic layers over sequences including thick-bedded sandstone to calcareous rocks showing chemical dissolution phenomena (karstification). The tunnels were built as draining tunnels and caused significant impacts, such as drying of springs and base-flow losses at mountain streams. A comprehensive hydrological monitoring programme and four multi-tracer test were done, focusing on four sections of the tunnel system. The tracer tests delivered unprecedented data on groundwater flow and transport in turbiditic aquifers and made it possible to better characterize the differential impacts of tunnel drainage along a geological gradient. The impact radius is 200 m in the thin-bedded sequences but reaches 2.3–4.0 km in calcareous and thick-bedded arenitic turbidites. Linear flow velocities, as determined from the peaks of the tracer breakthrough curves, range from 3.6 m/day in the thin-bedded turbidites to 39 m/day in the calcareous rocks (average values from the four test sites). At several places, discrete fault zones were identified as main hydraulic pathways between impacted streams and draining tunnels. This case shows that ignoring the hydrogeological conditions in construction projects can cause terrible damage, and the study presents an approach to better predict hydraulic impacts of draining tunnels in complex sedimentary rock settings.