The role of thrust ramp reactivation in pull-apart mechanism of the Erzincan basin,North Anatolian Fault Zone,Turkey

The new field data obtained from the southwestern margin of the Erzincan pull-apart basin located on the eastern segment of North Anatolian Fault Zone indicate that the opening of the basin is not only controlled by pull-apart mechanism but also by a lateral ramp structure associated with SSE-NNW Late Miocene thrusting along the Sivas Basin. The fault bordering the southwestern margin of the basin is the lateral part of the Karada thrust that is the roof thrust of the Sivas fold-thrust system, rather than a segment of the North Anatolian Fault Zone. The Erzincan basin was nucleated as a lateral ramp basin during the Pliocene on the lateral ramp-related folds and expanded by the pull-apart opening mechanism between two segments of the North Anatolian Fault Zone. The WSW-ENE pull-apart opening of the basin was recorded by the Pliocene lacustrine-fluvial sediments and Quaternary volcanics as listric normal faulting.     

Structural evidence for superposition of transtension on transpression in the Zagros collision zone: Main Recent Fault,Piranshahr area,NW Iran

The Main Recent Fault of the Zagros Orogen is an active major dextral strike-slip fault along the Zagros collision zone, generated by oblique continent–continent collision of the Arabian plate with Iranian micro-continent. Two different fault styles are observed along the Piranshahr fault segment of the Main Recent Fault in NW Iran. The first style is a SW-dipping oblique reverse fault with dextral strike-slip displacement and the second style consists of cross-cutting NE-dipping, oblique normal fault dipping to the NE with the same dextral strike-slip displacement. A fault propagation anticline is generated SW of the oblique reverse fault. An active pull-apart basin has been produced to the NE of the Piranshahr oblique normal fault and is associated with other sub-parallel NE-dipping normal faults cutting the reverse oblique fault. Another cross-cutting set of NE–SW trending normal faults are also exist in the pull-apart area. We conclude that the NE verging major dextral oblique reverse fault initiated as a SW verging thrust system due to dextral transpression tectonic of the Zagros collision zone and later it has been overprinted by the NE-dipping oblique normal fault producing dextral strike-slip displacement reflecting progressive change of transpression into transtension in the collision zone. The active Piranshahr pull-apart basin has been generated due to a releasing damage zone along the NW segment of the Main Recent Fault in this area at an overlap of Piranshahr oblique normal fault segment of the Main Recent Fault and the Serow fault, the continuation of the Main Recent Fault to the N.     

Fault kinematic and Plio-Quaternary paleostress evolution of the Bakırçay Basin,Western Turkey

ABSTRACT

At the end of the Cenozoic, western Turkey was fragmented by intense intra-continental tectonic deformation resulting in the formation of two extensional areas: a transtensional pull-apart basin systems in the northwest, and graben systems in the central and southwest areas. The question of the connection of this Late Cenozoic extensional tectonics to plate kinematics has long been an issue of discussion. This study presents the results of the fault slip data collected in Bak?rçay Basin in the west of Turkey and addresses changes in the direction of extensional stresses over the Plio-Quaternary. Field observations and quantitative analysis show that Bak?rçay Basin is not a simple graben basin that has evolved during a single phase. It started as a graben basin with extensional regime in the Pliocene and was transformed into a pull-apart basin under the influence of transtensional forces during the Quaternary. A chronology of two successive extensional episodes has been established and provides reasoning to constrain the timing and location of subduction-related back-arc tectonics along the Aegean region and collision-related extrusion tectonics in Turkey. The first NW–SE trending extension occurred during the Pliocene extensional phase, characterized by slab rollback and progressive steepening of the northward subduction of the African plate under the Anatolian Plate. Western Turkey has been affected, during the Middle Quaternary, by regional subsidence, and the direction of extension changed to N–S, probably in relation with the propagation of the North Anatolian Fault System. Since the Late Quaternary, NE–SW extension dominates northwest Turkey and results in the formation and development of elongated transtensional basin systems. Counterclockwise rotation of Anatolian block which is bounded to the north by the right-lateral strike-slip North Anatolian Fault System, accompanies to this extensional phase.     

Neotectonics and seismicity of Erzurum pull-apart basin,East Turkey

The study area is the Erzurum pull-apart basin located in the East Anatolian Tectonic Block (EATB), which is under the control of a strike-slip neotectonic regime since the beginning of Quaternary. The Quaternary Erzurum pull-apart basin is an about 1-30 km wide, 90 km long and actively growing strike-slip depression. It is bounded by the Erzurum-Dumlu sinistral strike-slip fault zone to the east-southeast, by the Askale sinistral strike-slip fault zone to the north-northwest, and by the Baskoy-Kandilli reverse fault zone and the N-S-trending Ilica oblique-slip normal fault set to the west. The Erzurum pull-apart basin was evolved by the deformation and subdivision of an E-W-trending older intermontane basin. The new basin has a 0.5 km thick, flat-lying (undeformed) and uconsolidated fill, which overlies, with an angular unconformitry, the deformed (folded and faulted) basement rocks of pre-Quaternary age. Basin fill consists of coarser-grained marginal facies (fault terrace, fan, fan-apron and superimposed fan deposits) and finer-grained depocentral facies represented by flood plain to organic material-rich marsh deposits. All gradations are seen among these lithofacies.The seismicity of the Erzurum pull-apart basin is quite high. The magnitude of the peak earthquake to be sourced from the active faults (e.g., the Erzurum fault) is about Mw = 7.0. This was proved by both the historical and recent earthquakes. Numerous settlements in the size of a large city (e.g., Erzurum), county, town and small villages with a total population of over 766,000 are located in and along the active fault-bounded margins of the Erzurum pull-apart basin. They are under the threat of destructive earthquakes to be sourced from the margin-boundary faults. Therefore, based on both the active fault parameters and the water-saturated basin fill, a large-scale earthquake hazard map has to be prepared. This map has to be used in both the earthquake hazard to risk analyses and the redesign of city planning and all type of constructions in Erzurum and other settlements in this region.     

Geophysical methods for mapping Quaternary sediment thickness: Application to the Saint-Lary basin (French Pyrenees)

This study aims at mapping the sediment infill thickness in the Saint-Lary basin (Aure valley, French Pyrenees). For this purpose, we combine passive seismic and gravity surveys. The resonance frequencies of the sediment body are retrieved from seismic ambient measurements, while the gravimetric survey shows negative residual anomaly of about −3 mGal in the basin. Both methods reveal unexpected but consistent bedrock shape. The southern Saint-Lary basin appears deeper than its northern part, with maximal infill thickness of about 300 m and 150 m, respectively. Valley cross sections show regular and smooth “U”-shape in the southern Saint-Lary basin, in contrast to an irregular and asymmetric pattern in the northern basin. This basin shape may be related to Quaternary fluvio-glacial carving processes especially controlled by a regional fault (the Soulan fault), variations in bedrock hardness, and preferential ice flow paths.     

Late Quaternary activity and dextral strike-slip movement on the Karakax Fault Zone, northwest Tibet

Field observations and interpretations of satellite images reveal that the westernmost segment of the Altyn Tagh Fault (called Karakax Fault Zone) striking WNW located in the northwestern margin of the Tibetan Plateau has distinctive geomorphic and tectonic features indicative of right-lateral strike-slip fault in the Late Quaternary. South-flowing gullies and N–S-trending ridges are systematically deflected and offset by up to ~ 1250 m, and Late Pleistocene–Holocene alluvial fans and small gullies that incise south-sloping fans record dextral offset up to ~ 150 m along the fault zone. Fault scarps developed on alluvial fans vary in height from 1 to 24 m. Riedel composite fabrics of foliated cataclastic rocks including cataclasite and fault gouge developed in the shear zone indicate a principal right-lateral shear sense with a thrust component. Based on offset Late Quaternary alluvial fans, ¹⁴C ages and composite fabrics of cataclastic fault rocks, it is inferred that the average right-lateral strike-slip rate along the Karakax Fault Zone is ~ 9 mm/a in the Late Quaternary, with a vertical component of ~ 2 mm/a, and that a M 7.5 morphogenic earthquake occurred along this fault in 1902. We suggest that right-lateral slip in the Late Quaternary along the WNW-trending Karakax Fault Zone is caused by escape tectonics that accommodate north–south shortening of the western Tibetan Plateau due to ongoing northward penetration of the Indian plate into the Eurasian plate.     

The recent fault scarps of the Western Alps (France): Tectonic surface ruptures or gravitational sackung scarps? A combined mapping, geomorphic, levelling, and Be dating approach

In the Western Alps, some recent scarps were previously interpreted as surface ruptures of tectonic reverse and normal faults that agree with microseismicity and GPS measurements. Our analysis shows that in fact there are hundreds of recent scarps, up to 30 m high and 2.1 km long, with only pure normal motions. They share the same characteristics as typical sackung scarps. The scarps are mainly uphill facing, parallel to the ridge crests and the contour lines. They are relatively short (less than 2.1 km) with respect to tectonic fault ruptures, and organized in swarms. They cut screes and relict rock glaciers with a slow (commonly 1 mm/year) average slip rate. In the Aiguilles Grives massif these sackung scarps clearly express the gravitational toppling of sub-vertical bedding planes in hard rocks. In contrast, the Belledonne Outer Crystalline Massif exhibits scarps that stem from the gravitational reactivation of conjugate tectonic faults. The recent faults extend to about 1600 m beneath the Rognier ridge crest, but are always above the valley floor. The main scarp swarm is 9.2 km long and constitutes the largest sackung ever described in the Western Alps. ¹⁰Be dating of a scarp and offset surfaces shows that > 4 m slip may have occurred rapidly (in less than 3800 years) sometimes between the end of the glaciation and 8800 ± 1900 years ago. This dating, together with the location of some faults far from the deep glacial valleys, suggests that sagging might have been triggered by strong earthquakes during a post-glacial period of probably enhanced seismicity. The Belledonne and Synclinal Median faults (just beneath the Rognier sackung) could have been the sources of this seismicity.     

Newly found Tunglo Active Fault System in the fold and thrust belt in northwestern Taiwan deduced from deformed terraces and its tectonic significance

We found active faults in the fold and thrust belt between Tunglo town and the Tachia River in northwestern Taiwan. The surface rupture occurred in 1999 and 1935 nearby the study area, but no historical surface rupture is recorded in this area, suggesting that the seismic energy has been accumulated during the recent time. Deformed fluvial terraces aid in understanding late Quaternary tectonics in this tectonically active area. This area contains newly identified faults that we group as the Tunglo Fault System, which formed after the area's oldest fluvial terrace and appears at least 16 km long in roughly N–S orientation. Its progressive deformations are all recorded in associated terraces developed during the middle to late Quaternary. In the north, the system consists of two subparallel active faults, the Tunglo Fault and Tunglo East Fault, striking N–S and facing each other from opposite sides of the northward flowing Hsihu River, whose course may be controlled by interactions of above-mentioned two active faults. The northern part of the Tunglo Fault, to the west of the river, is a reverse fault with upthrown side on the west; conversely the Tunglo East Fault, to the east, is also a reverse fault, but with upthrown side on the east. Both faults are marked by a flexural scarp or eastward tilting of fluvial terraces. Considering a Quaternary syncline lies subparallel to the east of this fault system, the Tunglo Fault might be originated as a bending moment fault and the Tunglo East Fault as a flexural slip fault. However, they have developed as obvious reverse faults, which have progressive deformation under E–W compressive stress field of Taiwan. Farther south, a west-facing high scarp, the Tunglo South Fault, strikes NNE–SSW, oblique to the region's E–W direction of compression. Probably due to the strain partitioning, the Tunglo South Fault generates en echelon, elongated ridges and swales to accommodate right-lateral strike–slip displacement. Other structures in the area include eastward-striking portion of the Sanyi Fault, which has no evidence for late Quaternary surface rupture on this fault; perhaps slip on this part of Sanyi Fault ceased when the Tunglo Fault System became active.     

The velocity structure of the Cariaco sedimentary basin,northeastern Venezuela,from refraction seismic data and possible relationship to earthquake hazard

The main damage from the July 9, 1997, Cariaco earthquake (Ms=6.8) was concentrated in the town of Cariaco and surrounding villages, which are located in the western part of the Cariaco sedimentary basin, close to the Gulf of Cariaco. Casanay, located at the eastern end of the sedimentary basin, suffered considerably less damage. The El Pilar fault, a right-lateral strike-slip fault that generated the earthquake, runs parallel to the southern border of the valley and crosses both towns. The determination of the velocity structure of the basin is the main objective of this study. Seismic refraction data were recorded along three lines, one of them along-strike and two perpendicular to the valley axis in the northern and southern bedrocks. Beneath Cariaco, approximately 1 km thick Quaternary sediments with seismic velocities of 1.9–2.1 km/s and bedrock velocities of more than 4 km/s were observed. The thickness of the Quaternary sediments varies within the basin, and Pleistocene sediments outcrop beneath Casanay. The increased thickness of the unconsolidated, water-saturated Quaternary sediments, together with the difference in the quality of buildings prior to the earthquake, probably is responsible for the damage pattern of the Cariaco earthquake.     

Closing-up structures, alternatives to pull-apart basins; the effect of bends in the North Anatolian Fault, Turkey

Fault blocks passing bends or stepovers in a fault zone must adapt their margins to the uneven fault trace. Two cases of adaption are distinguished for extensional bends or stepovers (transtension): (1) The fault margins close up behind a single bend ('knickpoint') of a strike-slip fault and a 'closing-up structure' (new term) arises or (2) fault-block margins are extended behind a releasing bend (double bend) or stepover parallel to the displacement and a pull-apart basin originates. The dosing up described here is accomplished by acute-angled synthetic strike-slip faults that dissect the straight fault in front of a knickpoint to form a zig-zag block boundary behind it. Crustal extension is also involved in the closing-up structure, but in a different way from typical pull-apart basins.
The closing-up structure illustrated was developed behind an extensional knickpoint in the North Anatolian Fault west of Lake Abant, NW Turkey, where the process of closing up continues to this day. The kinematic model of this closing-up structure is supported by displacements and ruptures observed during the 1967 Mudurnu valley earthquake and the 1957 Abant earthquake.     

青藏高原北部第四纪早期断裂活动的 新生性变化初步研究*

关于第四纪早期构造事件的年代学研究取得了大量数据,但对构造事件的表现形式缺乏认识。文章通过对海原断裂带内拉分盆地演化趋势及年代学研究,认为海原断裂带内的最新拉分盆地形成于1.6MaB.P.之后,代表一次新断裂的形成时期,且新断裂走向与先存断裂有一定的逆时针夹角。通过对青藏高原中部可可西里-东昆仑断裂带构造地貌的遥感解译和强震破裂调查,认为可可西里-东昆仑断裂带是一条具有新生性的强震构造带,新断裂形成时期为1.10~0.65MaB.P.之间,其构造带内的新生性断裂走向与先存断裂亦有一定的逆时针方向夹角。两条断裂带具有一致的演化趋势,说明在早更新世中后期存在区域性的构造事件,该事件表现为一系列新生性断裂的产生。     

Discovering a pull-apart basin using InSAR in Bursa,Turkey

The city of Bursa in Turkey is surrounded by major and secondary fault branches which splay from the North Anatolian Fault. Nonetheless, as their traces were not exactly known in the alluvial land of the Bursa basin, until this study, they were not plotted in the official active fault map of Turkey. In this study, the Bursa basin was observed by InSAR technology, and the subsidence which is consistent with the pull-apart basin geometry was detected in the basin. This finding was discussed in the local platforms in Turkey. Then, the city of Bursa was included into the priority provinces for the urban reconstruction under the risk of an earthquake, and the official active fault map of the region was revised by General Directorate of Mineral Research and Exploration of Turkey.     

Connectivity analyses of valley patterns indicate preservation of a preglacial fluvial valley system in the Dyfi basin, Wales

Coastal valleys in the west part of Mid-Wales, such as the Mawddach, Dysynni, Tal-y-llyn and Dyfi, acted as corridors for ice which drained the Welsh Ice Cap during the Devensian. Analyses of detailed digital elevation models, and interpretation of satellite images and aerial photographs, show the existence of large variations in the amount of glacial modification between these valleys. Although all the valleys are glacially over-deepened along late Caledonian fault lines, only the Dyfi basin exhibits a dendritic pattern, with V-shaped cross-profiles and valley spurs typical of valleys formed by fluvial processes. Connectivity analysis of the Dyfi basin shows that it exhibits an almost completely dendritic pattern with connectivity α and β values of 0.74 and 1.01, respectively, with little glacial modification of the preglacial fluvial valley pattern in the form of glacial valley breaching. Several examples of glacial meltwater incision into a well-developed pre-existing river valley system, causing river capture across watersheds, have been identified in the Dyfi basin. The degree of preservation of the preglacial fluvial valley system within the Dyfi basin indicates limited modification by glacial processes, despite the area being subjected to glacier activity during the Late Devensian at least. It is possible that major parts of the basin were covered by cold-based or slow-moving ice, close to, or under, a migrating ice-divide, with the major ice drainage occurring along the weaker zone of the Pennal Fault along which teh Dyfi valley is located, causing minor adjustments to the surrounding interfluves and uplands. It is proposed here that the general river valley morphology of the Dyfi basin is of a pre-Late Devensian age.     

Late Quaternary deformation features along the Anninghe Fault on the eastern margin of the Tibetan Plateau

On the eastern margin of the Tibetan Plateau, the Anninghe, Zemuhe and Xiaojiang faults comprise a N–S-trending active left-lateral fault system extending more than 700 km. The northernmost Anninghe Fault extends for ∼200 km, consisting of two sub-parallel N–S trending strands. Along the western strand, the fault traces occur almost strictly along the broad and flat Anninghe valley, displacing high terraces, alluvial fans and tributary channels of the Anninghe River. The eastern strand, on the other hand, cuts through the steep mountain slopes, with prominent rectilinear upslope-facing scarps and shutter ridges against pounded fluvial sediments from the east. The displacements along the eastern strand are much larger than that along the western strand, indicating the eastern strand is the major fault absorbing the E–W shortening. This study demonstrates that the Anninghe Fault is now acting as a relief-building boundary fault and absorbing the E–W compression under the eastwards motion of the Tibetan Plateau. Accordingly, the Anninghe region is a topographic transition area from steep relief to low gradient topography. The variation in topographic gradient is consistent with the differing tectonic regime between southern and northern parts of the Tibetan Plateau.     

Luminescence chronometry and geomorphic evidence of active fold growth along the Kachchh Mainland Fault (KMF), Kachchh, India: Seismotectonic implications

The Kachchh region of Western India is a pericratonic basin experiencing periodic high magnitude earthquakes events. In 2001 a catastrophic seismic event occurred at Bhuj measuring M_w = 7.7. The epicenters of both the 1956 and 2001 earthquakes were along the Kachchh Mainland Fault (KMF), proximal to the eastern end of the Northern Hill Range (NHR). The latter is a topographic expression of an active fault related fold on the hanging wall, and is controlled by a south dipping blind thrust.The present study deals with the eastern sector of NHR and uses optical dating to reconstruct the chronology of tectonically caused incisions. Along the backlimb of the NHR, incision ages on, channel fills and valley fill terraces progressively decrease from  12 ka to 4.3 ka. This age progression along with geomorphic evidences (decrease in topographic relief, drainage capture and drainage migration across the fold nose) suggests an active vertical and lateral fold growth along the KMF. Optical ages suggest that during the Late Holocene, the average uplift rate along the eastern NHR was 10 ± 1 mm/a. Recent GPS based estimates on crustal shortening are  12 mm/a.The KMF and the South Wagad Fault (SWF) represent the bounding faults of a transtensional basin that formed during the initial rifting. This basin is termed as the Samakhiali basin. The compressive stresses on account of structural inversion from normal to reverse phase resulted in lobate-shaped anticlines along KMF and SWF zone. These anticlines subsequently coalesced and formed linked and overlap segments. The present study suggests that eastward lateral deformation across the eastern portion of KMF has continued and has now resulted in its interaction with a left step over transfer fault called the South Wagad Master Fault (SWMF). This implies an increasing transpersional deformation of the Samakhiali basin. We therefore, suggest that the eastward NHR ridge propagation along KMF resulted in the thrust faulting on the south dipping SWMF resulting in the Bhuj 2001 event. The increasing strain on this basin may cause enhanced seismicity in the future along the eastern KMF and Wagad region.     

Touhuanping Fault, an active wrench fault within fold-and-thrust belt in northwestern Taiwan, documented by spatial analysis of fluvial terraces

This study aims at the recent activity and development of an active wrench fault, the Touhuanping Fault in northwestern Taiwan. Northwestern Taiwan has been proposed in a current situation between the mature to waning collision in terms of tectonic evolution. The main drainage in this area, the Chungkang River, flows close to the trace of the fault mentioned above. We examined various types of deformation of fluvial terraces along the Chungkang River as a key to understanding the nature and rate of the late Quaternary tectonics. The E–W trending Touhuanping Fault has long been mapped as a geological boundary fault, but its recent activity was suspected. Field survey revealed that its late Quaternary activity is recorded in the offset fluvial terraces. Our result shows dextral slip and vertical offset with upthrown side on the south, and activated at least twice since the emergence of terrace 4 (older terrace 3 with OSL date of ca. 80 ka). Total amount of offset recorded in the Touhuanping terrace sequence is 15 m for dextral and 10 m for vertical offset. Estimated recurrence time of earthquake rupture may be a few tens of thousand years. Uplift on the upthrown side of the Touhuanping Fault also resulted in the formation of drowned valleys which were graded to terrace 4. Other deformation features, such as back-tilting, westward warping, and a range-facing straight scarp, were also identified. A second-order anticline roughly parallel to the Touhuanping Fault is suggested to be the origin of the northward tilting on terrace 3; it could have resulted from a flower structure on the Touhuanping Fault at shallow depth. This may demonstrate that the buried segment of the Touhuanping Fault has also been active since 80 ka. In the northern study area, the westward warping at terrace 2 probably represents late Quaternary activity of another NE–SW trending Hsincheng Fault.     

Late-Cenozoic pull-apart basins, Boconó fault zone, Venezuelan Andes

Several areas along the Boconó fault zone are characterized by elongate, almond-shaped basins containing thick alluvial sequences, mainly of Quaternary age, and bounded by faults with normal Quaternary displacements. These areas are separated by segments characterized by narrow fault traces and right-lateral displacements. The fault-bounded basins are interpreted as pull-apart basins that originated at releasing bends along the fault zone. The size of the La González pull-apart basin suggests that Pliocene (?)-Quaternary right-lateral slip on the Boconó fault zone was of the order of 7–9 km.     

Tectonic evolution of the Qumran Basin from high-resolution 3.5-kHz seismic profiles and its implication for the evolution of the northern Dead Sea Basin

The Dead Sea Basin is a morphotectonic depression along the Dead Sea Transform. Its structure can be described as a deep rhomb-graben (pull-apart) flanked by two block-faulted marginal zones. We have studied the recent tectonic structure of the northwestern margin of the Dead Sea Basin in the area where the northern strike-slip master fault enters the basin and approaches the western marginal zone (Western Boundary Fault). For this purpose, we have analyzed 3.5-kHz seismic reflection profiles obtained from the northwestern corner of the Dead Sea. The seismic profiles give insight into the recent tectonic deformation of the northwestern margin of the Dead Sea Basin. A series of 11 seismic profiles are presented and described. Although several deformation features can be explained in terms of gravity tectonics, it is suggested that the occurrence of strike-slip in this part of the Dead Sea Basin is most likely. Seismic sections reveal a narrow zone of intensely deformed strata. This zone gradually merges into a zone marked by a newly discovered tectonic depression, the Qumran Basin. It is speculated that both structural zones originate from strike-slip along right-bending faults that splay-off from the Jordan Fault, the strike-slip master fault that delimits the active Dead Sea rhomb-graben on the west. Fault interaction between the strike-slip master fault and the normal faults bounding the transform valley seems the most plausible explanation for the origin of the right-bending splays. We suggest that the observed southward widening of the Dead Sea Basin possibly results from the successive formation of secondary right-bending splays to the north, as the active depocenter of the Dead Sea Basin migrates northward with time.     

东昆仑断裂带库赛湖段晚第四纪古地震研究*

对东昆仑断裂带库赛湖段进行了断错地貌填图和古地震探槽揭露研究。除2001年昆仑山口西8.1级地震外,共揭露出9次古地震事件,它们的年龄分别为31900±1923aB.P. , 27990±1681aB.P. , 23635±1427aB.P. , 20345±1225aB.P. , 16865±1018aB.P. , 12935±774aB.P. , 9730±592aB.P. , 6955±425aB.P.和3100±201aB.P.;古地震重复间隔分别为3910±2554a,4355±2205a,3290±1881a,3480±1593a,3930±1279a,3205±975a,2775±728a,3855±470a和3100±201a。研究结果表明,库赛湖段晚第四纪古地震活动具有准周期性,其平均重复间隔为3544±416a。发生在距今3100年前的倒数第1次古地震事件的离逝时间与重复间隔非常接近,这意味着2001年11月14日发生在库赛湖段的8.1级大地震为该断裂地震活动在准周期上的再现。高的滑动速率和长周期复发间隔表明库赛湖段活动习性以重复发生大地震为特征。     

Field evidences from northern Dead Sea Fault Zone (South Turkey): New findings for the initiation age and slip rate

The left-lateral strike–slip Dead Sea Fault Zone (DSFZ) extends from the Red Sea in the south to the East Anatolian Fault Zone (EAFZ) in the north. This study examines the northern part of the DSFZ around Amik Basin and presents surface and subsurface geological evidence for the Quaternary activity and initiation age of the northernmost DSFZ. The DSFZ extends N–S in the south of the Amik Basin where clear geological and morphological evidence exists for faulting. Geological observations around Amik Basin, analyses of borehole data and electrical resistivity profiles within the Amik Basin indicate that the activity of the northern DSFZ started after Pliocene in the Amik Basin. Subsurface data in the basin suggest that the DSFZ offsets a pre-Quaternary basin sinistrally by about 7.9 km. The offset pre-Quaternary basin suggests at least 4.94 ± 0.13 mm/year slip rate for the northern part of the DSFZ. The Karasu Fault Zone (KFZ) extends in an en-echelon pattern along the western margin of the Karasu Valley and it transfers the significant amount of slip from DSFZ to the EAFZ.