Thermomechanical evolution of the high‐grade core in the nappe zone of Variscan Sardinia,Italy: the role of shear deformation and granite emplacement

In the nappe zone of the Sardinian Variscan chain, the deformation and metamorphic grade increase throughout the tectonic nappe stack from lower greenschist to upper amphibolite facies conditions in the deepest nappe, the Monte Grighini Unit. A synthesis of petrological, structural and radiometric data is presented that allows us to constrain the thermal and mechanical evolution of this unit. Carboniferous subduction under a low geothermal gradient (~490–570 °C GPa^?1) was followed by exhumation accompanied by heating and Late Carboniferous magma emplacement at a high apparent geothermal gradient (~1200–1450 °C GPa^?1). Exhumation coeval with nappe stacking was closely followed by activity on a ductile strike‐slip shear zone that accommodated magma intrusion and enabled the final exhumation of the Monte Grighini Unit to upper crustal levels. The reconstructed thermo‐mechanical evolution allows a more complete understanding of the Variscan orogenic wedge in central Sardinia. As a result we are able to confirm a diachronous evolution of metamorphic and tectonic events from the inner axial zone to the outer nappe zone, with the Late Variscan low‐P/high‐T metamorphism and crustal anatexis as a common feature across the Sardinian portion of the Variscan orogen.     

Deformation during exhumation of medium‐ and high‐grade metamorphic rocks in the Variscan chain in northern Sardinia (Italy)

The Anglona and SW Gallura regions represent key places to investigate the tectonic evolution of medium‐ and high‐grade metamorphic rocks cropping out in northern Sardinia (Italy). From south to north we distinguish two different metamorphic complexes recording similar deformation histories but different metamorphic evolution: the Medium Grade Metamorphic Complex (MGMC) and the High Grade Metamorphic Complex (HGMC). After the initial collisional stage (D1 deformation phase), both complexes were affected by three contractional deformational phases (D2, D3 and D4) followed by later extensional tectonics. The D2 deformation phase was the most significant event producing an important deformation partitioning that produced localized shearing and folding domains at the boundary between the two metamorphic complexes. We highlight the presence of two previously undocumented systems of shear belts with different kinematics but analogous orientation in the axial zone of Sardinia. They became active at the boundary between the MGMC and HGMC from the beginning of D2. They formed a transpressive regime responsible for the exhumation of the medium‐ and high‐grade metamorphic rocks, and overall represent a change from orthogonal to orogen‐parallel tectonic transport. Copyright © 2008 John Wiley & Sons, Ltd.     

Ductile wrench tectonics and exhumation of hercynian metamorphic basement in Sardinia: Monte Grighini Complex

Abstract

The Monte Grighini Complex (Central-Western Sardinia) is a NW-SE trending metamorphic complex of Hereynian age made up of a medium grade Lower tectonic unit with mylonitie granitoids and a low grade Upper tectonic unit exposed in the westernmost and southernmost portions of this complex. The Lower Unit shows a prograde metamor phism from garnet to sillimanite zone and the transition from MP/MT to LP/HT metamorphism. The metamorphic climax was reached at the end of the main deformative phase 1)2 (600° C. 6 kbar). After the main tectonic and metamorphic phase. the Lower Unit was affected by a wide NW-SE trending ductile dextral wrench shear zone. Intrusive rocks emplaced within the shear zone yielded radiometric ages of 305-300 Ma. Shear deformation leads to low temperature C-S mylonites and retrograde phyllonitic rocks with subhorizontal NW-SE trending stretching lineations. Kinematic analysis of the shear zone points to a dextral sense of shear with an amount of ductile displacement of about 7 km. Later low angle N-S and E-W trending normal faults are associated with cataclastic zones separating the Lower Unit from the Upper one. These faults originated during a later evolutionary stage of the shear zone. This shows a progressive change of deformation regime from duetile wrenching to brittle normal faulting. The Monte Grighini Complex is a good example of ductile wrench tectonics. followed by uplift and extension in the Paleozoic basement of Sardinia.     

Structural evolution of the Tuscan Nappe in the southeastern sector of the Apuan Alps metamorphic dome (Northern Apennines,Italy)

Structural analysis carried out in the Tuscan Nappe (TN) in the southeastern sector of the Apuan Alps highlights a structural evolution much more complex than that proposed so far. The TN has been deformed by structures developed during four deformation phases. The three early phases resulted from a compressive tectonic regime linked to the construction of the Apenninic fold‐and‐thrust‐belt. The fourth phase, instead, is connected with the extensional tectonics, probably related to the collapse of the belt and/or to the opening of the Tyrrhenian Sea. Our structural and field data suggest the following. (1) The first phase is linked to the main crustal shortening and deformation of the Tuscan Nappe in the internal sectors of the belt. (2) The second deformation phase is responsible for the prominent NW–SE‐trending folds recognized in the study area (Mt. Pescaglino and Pescaglia antiforms and Mt. Piglione and Mt. Prana synforms). (3) The direction of shortening related to the third phase is parallel to the main structural trend of the belt. (4) The interference between the third folding phase and the earlier two tectonic phases could be related to the development of the metamorphic domes. The two directions of horizontal shortening induced buckling and vertical growth of the metamorphic domes, enhancing the process of exhumation of the metamorphic rocks. (5) The exhumation of the Tuscan Nappe occurred mostly in a compressive tectonic setting. A new model for the exhumation of the metamorphic dome of the Apuan Alps is proposed. Its tectonic evolution does not fit with the previously suggested core complex model, but is due to compressive tectonics. Copyright © 2004 John Wiley & Sons, Ltd.     

Late orogenic collapse and thermal doming in the northern Gondwana margin incorporated in the Variscan Chain: A case study from the Ozieri Metamorphic Complex, northern Sardinia, Italy

A branch of the South European Variscan chain is noticeably exposed in Sardinia. The early stage of collision between the Northern Gondwana margin and the Armorica Terrane Assemblage (ATA) generated syn-metamorphic folding and thrusting. The evidences of such deformation are well preserved in the nappe zone, a structural domain characterized by stacking of different tectonic units under metamorphism of Barrovian greenschist facies. A late, post-nappe, shortening, under retrograde metamorphic conditions, gave rise to wide, upright, N120–N160 trending antiforms that control the trend of the chain. The structural analysis of the Ozieri Metamorphic Complex (OMC) shows evidence of an important phase of late-Variscan extensional tectonics. Deformation results in, the formation of oppositely dipping, normal shear zones, which developed at upper and middle structural level along the limbs of major regional antiforms causing fabric reactivation, crustal thinning, and exhumation of the OMC core. Within the OMC, the activity of the shear zones was coeval with HT-LP metamorphism as suggests the occurrence of syn-kinematic cordierite + andalusite ± sillimanite + biotite. Whereas syntectonic dykes and a tonalite body in the deeper part of the OMC indicate that early emplacement of melt along shear zones and/or in the antiform hinges possibly supplied the heat for the anomalous thermal gradient and triggered the exhumation of a core complex-like structure.     

LP/HT metamorphism as a temporal marker of change of deformation style within the Late Palaeozoic accretionary wedge of central Chile

A Late Palaeozoic accretionary prism, formed at the southwestern margin of Gondwana from Early Carboniferous to Late Triassic, comprises the Coastal Accretionary Complex of central Chile (34–41°S). This fossil accretionary system is made up of two parallel contemporaneous metamorphic belts: a high‐pressure/low temperature belt (HP/LT – Western Series) and a low pressure/high temperature belt (LP/HT – Eastern Series). However, the timing of deformation events associated with the growth of the accretionary prism (successive frontal accretion and basal underplating) and the development of the LP/HT metamorphism in the shallower levels of the wedge are not continuously observed along this paired metamorphic belt, suggesting the former existence of local perturbations in the subduction regime. In the Pichilemu region, a well‐preserved segment of the paired metamorphic belt allows a first order correlation between the metamorphic and deformational evolution of the deep accreted slices of oceanic crust (blueschists and HP greenschists from the Western Series) and deformation at the shallower levels of the wedge (the Eastern Series). LP/HT mineral assemblages grew in response to arc‐related granitic intrusions, and porphyroblasts constitute time markers recording the evolution of deformation within shallow wedge material. Integrated P–T–t–d analysis reveals that the LP/HT belt is formed between the stages of frontal accretion (D₁) and basal underplating of basic rocks (D₂) forming blueschists at c. 300 Ma. A timeline evolution relating the formation of blueschists and the formation and deformation of LP/HT mineral assemblages at shallower levels, combined with published geochronological/thermobarometric/geochemistry data suggests a cause–effect relation between the basal accretion of basic rocks and the deformation of the shallower LP/HT belt. The S₂ foliation that formed during basal accretion initiated near the base of the accretionary wedge at ~30 km depth at c. 308 Ma. Later, the S₂ foliation developed at c. 300 Ma and ~15 km depth shortly after the emplacement of the granitoids and formation of the (LP/HT) peak metamorphic mineral assemblages. This shallow deformation may reflect a perturbation in the long‐term subduction dynamics (e.g. entrance of a seamount), which would in turn have contributed to the coeval exhumation of the nearby blueschists at c. 300 Ma. Finally, ⁴⁰Ar–³⁹Ar cooling ages reveal that foliated LP/HT rocks were already at ~350 °C at c. 292 Ma, indicating a rapid cooling for this metamorphic system.     

Late evolution of the southern European Variscan belt: Exhumation of the lower crust in a context of oblique convergence

The south-eastern part of the European Variscan belt forms a zone composed of several crystalline segments: the External Crystalline Massifs of the western Alps, the Maures-Tanneron massif, also Corsica and Sardinia, which are mutually displaced due to the Alpine deformation of the European Paleozoic lithosphere. All these crystalline fragments record similar structural, metamorphic, geochronological and magmatic histories during Paleozoic times. In particular, the Late Carboniferous period (～320–300 Ma) is characterized by crustal-scale folding associated with strike-slip faulting and intracontinental basin formation. In this transpressive context, dome structures exhume partially-molten crust in convergent setting, which is in contradiction with generally accepted models of late orogenic collapse of the Variscan belt. It is suggested that this particular transpressive–obliquely convergent template, exemplified by tectonometamorphic evolution of the Maures-Tanneron massif, is valid for the whole eastern European Variscan margin.     

Strain analysis and vorticity of flow in the Northern Sardinian Variscan Belt: Recognition of a partitioned oblique deformation event

A field example of strain partitioning has been analysed along the Nurra–Asinara transect of the NW Sardinian Variscan chain (Italy). The section in the Nurra–Asinara area is in a continuous sequence of tectono-metamorphic complexes made of low- to high-grade metamorphic rocks affected by a polyphase tectonic history. The principal fabric of the area is controlled by a D2 progressive deformation phase in which the strain is partitioned into folds and shear zone domains. The D2 stretching lineation and shear sense show a clear change from south to north. The principal meso- and micro-structures, vorticity gauges and a quantitative kinematic analysis of local strain suggest that the D2 kinematic history could be envisaged as an oblique heterogeneous deformation similar to the transpressive systems described in ancient and modern settings elsewhere. Using a simple kinematic model we also propose that both a transpressive system followed by “thrusting” or a partitioned transpressive system could be responsible for the fabric distribution and strain accumulation described in the study transect.     

Tectonometamorphic evolution of an intracontinental orogeny inferred from P–T–t–d paths of the metapelites from the Rehamna massif (Morocco)

New petrographic and microstructural observations, mineral equilibria modelling and U/Pb (monazite) geochronological studies were carried out to investigate the relationships between deformation and metamorphism across the Rehamna massif (Moroccan Variscan belt). In this area, typical Barrovian (muscovite to staurolite) zones developed in Cambrian to Carboniferous metasedimentary rocks that are distributed around a dome‐like structure. First assemblages are characterized by the presence of locally preserved andalusite, followed by prograde evolution culminating at 6 kbar and 620 °C in the structurally deepest staurolite zone rocks. This Barrovian sequence was subsequently uplifted to supracrustal levels, heterogeneously reworked at greenschist facies conditions, which was followed locally by static growth of andalusite, indicating heating to 2.5–4 kbar and 530–570 °C. The ²⁰⁶Pb/²³⁸U monazite age of 298.3 ± 4.1 Ma is interpreted as minimum age of peak metamorphic conditions, whereas the ages of 275.8 ± 1.7 Ma and 277.0 ± 1.1 Ma date decompression and heating at low pressure, in agreement with previous dating of Permian granitoids intruding the Rehamna massif. The prograde metamorphism occurred during thickening and associated horizontal flow in the deeper crust (S1 horizontal schistosity). The horizontally disposed metamorphic zones were subsequently uplifted by a regional scale antiform during ongoing N–S compression. The re‐heating of the massif follows late massive E–W shortening, refolding and retrograde shearing of all previous fabrics coevally with regionally important intrusions of Permian granitoids. We argue that metamorphic evolution of the Rehamna massif occurred several hundred kilometres from the convergent plate boundaries in the interior of continental Gondwanan plate. The tectonometamorphic history of the Rehamna massif is put into Palaeozoic plate tectonic perspective and Late Carboniferous reactivation of (Devonian)–Early Carboniferous basins formed during stretching of the north Gondwana margin and formation of the Palaeotethys Ocean. The inherited heat budget of these magma‐rich basins plays a role in the preferential location of this intracontinental orogen. It is shown that rapid transition from lithospheric stretching to compression is characterized by specific HT type of Barrovian metamorphism, which markedly differs from similar Barrovian sequences along Palaeozoic plate boundaries reported from Variscan Europe.     

Relationships between structural units in the Tormes gneiss dome (NW Iberian massif, Spain): geometry, structure and kinematics of contractional and extensional Variscan deformation

Situated in the inner zone of the Iberian massif, the Tormes gneiss dome is composed of two units with different lithological contents and metamorphic evolution. The upper unit consists of a thick sequence of low- to high-grade metasediments, ranging in age from Late Proterozoic to Silurian. The lower unit is a high-grade metamorphic complex composed mostly of granitic orthogneisses and minor amounts of metasediments. Four Variscan deformations are distinguished. At deep structural levels, the most prominent D1 ductile structures are recumbent anticlines with NE vergence, cored by orthogneisses, and separated by narrow synclines. These recumbent folds grade upward into less-flattened and NE-vergent steeper structures. The overall structure is that of a large-scale stacking of orthogneissic slices underlying a shortened and thickened sedimentary sequence that formed a huge orogenic wedge in this region. During the heterogeneous and ductile D2 deformation, the rheological behaviour of the orthogneisses and metasediments became similar. The vertical D2 shortening associated with a strong top-to-the-SE shearing in a large-scale subhorizontal shear zone folded the prior SW-dipping structures, developing SW-vergent folds with axes close to NW–SE L2 mineral and stretching lineations. D2 corresponds to post-collisional crustal thinning following D1 crustal thickening. The D3 and D4 late structures are much more localized and occurred under retrograde conditions, but have a significant effect on the final geometry of the metamorphic complex. This sequence of contractional and extensional deformative events permits a tectonic interpretation in the framework of the dynamic wedge theory based on the evolution in the time of the stress configuration applied to a portion of the crust.     

eo-Variscan (Devonian?) melting in the High Grade Metamorphic Complex of the NE Sardinia Belt (Italy)

New structural data pointed out the presence of an older scattered migmatization event (Devonian?, M1) overcome by the well known Variscan migmatization event (Lower-Middle Carboniferous, M2) related to the Late extensional tectonic that affected the High Grade Metamorphic Complex (HGMC) in the Variscan Belt of Sardinia (Italy). The M1 event is only recognizable in the kyanite – amphibole bearing migmatitic gneiss. Both migmatization events (M1 and M2) are characterized by a syn-tectonic non coaxial deformations (D1 and D2 deformational events). D1 shows a top to NW sense of shear while the D2 event a top to NE/SE sense of shear (the shear senses are considered at the present Sardinia – Corsica block position in the Mediterranean sea). The M2+D2 is characterized by a complicate, composite normal shear network; the M1+D1 by inverse shear zones. The M2+D2 is transposed by the late D3 strike slip shear event: the D3 is characterized by strike slip shear zones syn-kinematic to the emplacement of Late Carboniferous granitoids (320 Ma – 300 Ma). Despite the absence of geochronological data about the M1+D1 event, the field relationships suggest, for first time, an older migmatization process (Devonian?) syn-tectonic with the late stage of thickness of the Sardinia Variscan Belt. Similar evolutions are recognized in different segments of the Variscan Belt such as the Massif Central (France) or in the eastern mid-European Variscides.     

The hercynian chain in Sardinia (Italy)

Abstract

A new geodynamic model for the Sardinian segment of the Hercynian chain is presented. The improvement of knowledge regarding several geological, metamorphic, magmatic and geochronological aspects of the Sardinian Palaeozoic basement, mainly achieved in the last few years, allows us to propose a more complete picture of its evolution.

The occurrence of remnants of an oceanic suture along a major tectonic lineament in northern Sardinia, as well as the products of Ordovician calc-alkaline magmatism, testifies to the presence, during the Lower Paleozoic, of an ancient (Precambrian- Cambrian) oceanic domain and its consumption along an Andean- type subduction zone. The following Carboniferous continental collision caused crustal stacking with Barrovian metamorphism and southward-migrating deformation from the suture zone toward the foreland.

Early Carboniferous Culm-type facies sediments, deposited in the outermost zone of the chain, imply that continental collision took place earlier in the internal zone, from Late Devonian or Early Carboniferous.

The collisional orogenic wedge experienced ductile extension during the Late Carhoniferous as a result of gravitational collapse of the thickened continental crust.

Extensional tectonism enhanced the uplift of the chain and some regions underwent tectonic denudation or LP/HT metamorphism and somewhere anatexis. The emplacement of calc-alkaline batholiths and the development of Late Carboniferous - Early Permian molasse basins occurred during extension that prolonged throughout the Permian.     

Age constraints to the relationships between magmatism, metamorphism and tectonism in the Aracena metamorphic belt, southern Spain

 The Aracena metamorphic belt (AMB), southwest Iberian peninsula, is characterized by the following geological elements: (a) a high-temperature/low-pressure (HT/LP) metamorphic belt a few kilometres wide and more than 200 km long; (b) a linear belt of oceanic amphibolites with a low-pressure inverted metamorphic gradient; (c) crustal-scale ductile shear zones; and (d) mafic, noritic intrusions of high-Mg andesite (boninite) composition. The relationships between these elements led to the proposal of a model of ridge subduction for this sector of the Hercynian belt of Europe. This interpretation is supported by the age relationships displayed between the main rock units considered representative of the main tectonic and petrological processes responsible for the geological elements mentioned previously. The results of a geochronological study (Ar–Ar, Rb–Sr and Sm–Nd) clearly support a Late Paleozoic tectonic evolution at an active continental margin. The time evolution of the metamorphism in the oceanic domain, ranging from 342.6±0.6 Ma in the west to 328.4±1.2 Ma in the east, over a distance of 70 km along the metamorphic belt, support a tectonic model of triple-junction migration responsible for the creation at depth of a slab-free window with decisive consequences for the thermal evolution of the region. The origin of the linear metamorphic belt of HT/LP regime may be explained by the migration along a continental margin of a punctual thermal anomaly induced by the creation of a triple-junction at the continental margin. Received: 9 March 1998 / Accepted: 9 December 1998     

歪石砬子变粒岩构造演化序列

歪石砬子变粒岩为早元古代变质岩,因经历了多期变形的叠加与改造,岩石构造非常复杂,可划分为四期变形,由区域变质变形,层间韧性剪切带,开阔褶皱和单向膝折带组成构造演化序列,前两期变形属中浅部构造层次变形,后两期变形属表浅部构造层次变形;构造应力场由近南北向挤压转为近东西向挤压。     

Structure and U–Pb zircon geochronology in the Variscan foreland of SW Sardinia,Italy

New field mapping, U–Pb zircon geochronology and structural analysis of the southernmost Sardinia metamorphic basement, considered a branch of the Variscan foreland, indicate that it is, in part, allochthonous and was structurally emplaced within the foreland area, rather than being older depositional basement beneath the foreland succession. The Bithia Formation, classically considered part of the ‘Southern Sulcis metamorphic Complex’ (and here termed the Bithia tectonic unit, or BTU), is a greenschist facies metamorphic unit commonly interpreted as Precambrian in age. New geochronology of felsic volcanic rocks in the BTU, however, yield a U–Pb zircon age of 457.01 ± 0.17 Ma (Upper Ordovician). Thus, the depositional age of the unit is younger than the weakly metamorphosed Lower Cambrian rocks of the adjacent foreland succession. New detailed mapping and analysis of the field relationships between the BTU and foreland succession indicates that their contact is a mylonitic shear zone. The metamorphic character, general lithology, and deformational history of the BTU are similar to those of units in the Variscan Nappe Zone located northeast of the foreland area. We reinterpret the BTU as a synformal klippe of material related tectonically to the Variscan Nappe Zone. We infer that it was thrust over and became infolded into the foreland during late stages of the Variscan contractional deformation. Copyright © 2012 John Wiley & Sons, Ltd.     

Tectonic evolution of the deep crust: Variscan reactivation by extension and thrusting of Precambrian basement in the Bragança and Morais massifs (Tras-os-Montes,NE Portugal)

Abstract

The Braganca amd Morais Massifs (NE Portugal) comprise a pile of four nappes on lop of the Autochthon of the Central-Iberian Zone : a Parautochthon (PTC), a Lower Allochthon (LATC), an Ophiolitic Complex (OTC) and an Upper Allochton (UATC). This article focuses on the tectonic evolution of the prc-Variscan basement preserved in the Upper Allochthonous Thrust Complex. (1) In the Morais Massif, the UATC is mainly composed of orthogneisscs, micaschists and high-grade melamorphic rocks restricted to a small duplex between the orthogneisses and the ophiolitic complex. The orthogneisses are pervasively deformed by D6 (Variscan D1). characterized by NNW-SSE stretching lineation, C-S structures, and sense of shear to the SSE. The high-grade melamorphic rocks show at least three ductile deformation phases older than the gneisses deformation. The micaschists and the orthogneisses are cut by mafic sills and dykes transformed into amphibolites by the Variscan tec-tonometamorphic evolution. In a restricted domain where dykes arc less deformed, two deformation events can be recognized and arc considered to be pre-Variscan. The walls of the dykes show a N-S stretching and mineral lineation interpreted as resulting from D6 (Variscan D1). (2) In the Braganca Massif, the UATC comprises mafic to ultrainafic igneous and high-grade melamorphic rocks, and paragncisses with ky-eclogite lenses. Six ductile deformation phases are recognized. The D1 to D4 events may correspond to a complete pre-Variscan orogenic cycle, from subduction (D1) to collision (D2-DS) and thrusting of the high-grade metamorphic rocks to upper levels in the crust (D3-D4); D5 may result from the Lower Palaeozoic extensional event that marks the begining of the Variscan Wilson cycle; D6 is interpreted as the first Variscan orogenic event with southward movement. The UATC of the Cabo Ortegal anil Braganca Massifs comprise mainly upper mantle/lower erustal rocks. By contrast, the UATC of the Ordenes and Morais Massifs is mainly composed of middle to upper erustal rocks. Vic propose that this is the result of a regional ductile normal fault (extensional event) that was active prior to the Variscan orogeny, in Lower Palaeozoic times, and affected a Precambrian basement.     

Deformation, metamorphism and imbrication of the Indian plate, south of the Main Mantle Thrust, north Pakistan

ABSTRACT South of the Main Mantle Thrust in north Pakistan, rocks of the northern edge of the Indian plate were deformed and metamorphosed during the main southward thrusting phase of the Himalayan orogeny. In the Hazara region, between the Indus and Kaghan Valleys, metamorphic grade increases northwards from chlorite zone to sillimanite zone rocks in a typically Barrovian sequence. Metamorphism was largely synchronous with early phases of the deformation. The metamorphic rocks were subsequently imbricated by late north-dipping thrusts, each with higher grade rocks in the hanging wall than in the footwall, such that the metamorphic profile shows an overall tectonic inversion. The rocks of the Hazara region form one of a number of internally imbricated metamorphic blocks stacked, after the metamorphic peak, on top of each other during the late thrusting. This imbrication and stacking represents an early period of post-Himalayan uplift.     

From intra-oceanic subduction to arc accretion and arc-continent collision: Insights from the structural evolution of the Río San Juan metamorphic complex,northern Hispaniola

The Río San Juan metamorphic complex exposes a segment of a high-pressure subduction-accretionary complex built during Caribbean island arc-North America continental margin convergence. It is composed of accreted arc- and oceanic-derived metaigneous rocks, serpentinized peridotites and minor metasediments forming a structural pile. Combined detailed mapping, structural and metamorphic analysis, and geochronology show that the deformation can be divided into five main events (D1–D5). An early subduction-related D1 deformation and M1 metamorphism produced greenschist (mafic rocks of the Gaspar Hernández peridotite-tectonite), blueschist and eclogite (metamafic blocks in the Jagua Clara mélange), high-P epidote-amphibolite and eclogite (Cuaba unit), and lower blueschist and greenschist-facies conditions (Morrito unit). This was followed by M2 decompression and cooling in the blueschist, greenschist and low-P amphibolite-facies conditions. The shape of the retrograde P-T path, the age of the exhumation-related D2 structures, and the tectonic significance of D2 deformation are different in each structural unit. Published U–Pb and ⁴⁰Ar/³⁹Ar plateau ages and T-t/P-t estimations reveal diachronic Turonian-Coniacian to Maastrichtian retrograde M2 metamorphism in the different structural units of the complex, during a consistent D2 top-to-the-NE/ENE tectonic transport. Regionally, a similar top-to-the-ENE tectonic transport also took place in the metasedimentary nappes of the Samaná complex during the Eocene to earliest Miocene. This kinematic compatibility indicates a general northeastward progradation of deformation in the northern Caribbean convergent margin, as the successive tectonic incorporation of arc, oceanic and continental-derived terrains to the developing Caribbean subduction-accretionary complex took place. D3–D5 deformations are discontinuous and much less penetrative, recording the evolution from ductile to brittle conditions of deformation in the complex. The D3 event substantially modified the nappe-stack and produced open folds with amplitudes up to kilometer-scale. The Late Paleocene-Eocene D4 structures are ductile to ductile–brittle thrusts and inverse shear bands. D5 is a Tertiary, entirely brittle deformation that had considerable influence in the geometry of the whole complex. From the Miocene to the Present, it has been cut and laterally displaced by a D5 sinistral strike-slip fault system associated with the Septentrional fault zone.     

苏鲁高压-超高压带的结构、变形特征及形成背景探讨

苏鲁高压-超高压变质带由不同层次、不同级别、不同变质岩石组合的构造岩片堆叠而成,自北向南可分别为9个构造岩片。这种复杂的结构的形成和发展主要受早期的变质变形作用控制,并被晚期构造作用改造。本文重点对高压-超高压变质带的构造变形进行了分析,自元古宙—中生代韧性改造事件可分为4期。最后在以上工作的基础上对其形成的地质背景进行了探讨,指出了两次高压-超高压变质事件存在的可能,而且其新元古代的构造事件可与全球Rodinian超大陆的形成与裂解相对比。     

大别—苏鲁区UHP变质岩构造学及流变学演化

在大别—苏鲁区的30个关键位置,对UHP/HP变质岩进行详细构造解析、大比例尺(1∶10000)制图并在区域尺度上进行观察和对比,以便揭示它们的构造几何学、变形条件和流变学演化。初步的研究结果指出,广泛出露的UHP/HP榴辉岩相岩石形成一个巨大的UHP/HP变质带,提供了一个观察中朝与扬子克拉通之间三叠纪大陆深俯冲-碰撞带过程的窗口。观察的显微构造及组构指出,UHP/HP变质带内岩石变形机制,无论是在榴辉岩相阶段还是在榴辉岩相后阶段,都是以塑性流变为主,其力学行为和组构特征都受组成矿物的强度、强度差等流变学特征,以及变形物理环境如压力、温度、应变速率、差异应力和流体含量等的制约。在俯冲/碰撞带内的变形分解作用于岩石圈不同层次及不同的构造阶段都曾发生,而且,在不同尺度上,应变局部化形成具高应变的剪切带网络,且一般显示典型的布丁-基质或碎斑-基质构造及流变学型式。根据构造、岩石、变质作用及地质年代学资料,借助于岩石圈流变学基本原理,提出一个大别—苏鲁区UHP/HP变质岩石流变学演化的工作模式,它涉及早期扬子与中朝克拉通间三叠纪(~250~230Ma)大陆深俯冲/碰撞、UHP/HP变质岩形成,相继深埋岩石的多期折返。特别强调UHP/HP岩石向地壳表层的折返,主要是构造过程,地面侵蚀作用是次要的。