The Šariš Transitional Zone,revealing interactions between Pieniny Klippen Belt,Outer Carpathians and European platform

The Pieniny Klippen Belt (PKB) is a narrow structure delineating the boundary between the Central and Outer Carpathians. It is built of nappes stacked during the Cretaceous and Paleocene and then re-folded in the Miocene during the formation of the Outer Carpathian overthrusts. The internal structure of the PKB at the Polish/Slovakian border first formed during northward nappe thrusting processes, which were most intense at the turn of the Cretaceous to the Paleocene. A secondary factor is the change in strike of the PKB turning from W–E to WNW–ESE, associated with dextral strike-slip faulting in the Carpathian basement (North-European Platform). These NNW-SSE oriented strike-slip fault zones, broadly parallel to the Teisseyre-Tornquist Zone, are responsible for the segmentation of the down-going plate, which influenced the subduction and collision between the North-European Platform and the Central Carpathian Block. Among them, the most important role was played by the Kraków—Myszków Fault Zone separating the Ma?opolska and Upper Silesian blocks in the Carpathian foreland. Shifts and interactions between the neighboring Pieniny and Outer Carpathian basins—during contemporaneous sedimentation and deformation—resulted in a difficult-to-define, transitional zone. Until now this zone had the rank of a tectonic unit, named “Grajcarek Unit” in Poland and “?ari? Unit” in the Slovak Republic. However, its northern boundary, often taken to represent the Central/Outer Carpathians boundary, is ambiguous. These problems are due to the spatial overlap of thrusting and gravitational flows resulting in chaotic breccias, olistoliths and olistostrome formation, which formed repeatedly and became deformed during the Maastrichtian to Early Miocene. Tectonic deformations in this area gradually vanished towards the north. This zone can therefore be defined as the Peri-Klippen part of the Magura Nappe that lacks a distinct northern tectonic limit. For this reason it is named ?ari? Transitional Zone (?TZ).     

Tectonics of the western part of the Polish Outer Carpathians

The western part of the Polish Outer Carpathians is built up from the thrust, imbricated Upper Jurassic-Neogene flysch deposits. The following Outer Carpathian nappes have been distinguished: Magura Nappe, Fore-Magura group of nappes, Silesian, Subsilesian and Skole nappes. Interpretation of seismic and magnetotelluric survey from the region South of Wadowice, allows observation of relationship between basement and flysch nappes in the Outer Carpathians. It also allows identification of dislocation cutting both flysch nappes and their basement. All the Outer Carpathian nappes are thrust over the southern part of the North European Platform. The platform basement is composed of older Precambrian metamorphic rocks belonging to the Bruno-Vistulicum terrane. Sedimentary cover consists of Paleozoic, Mesozoic and Neogene sequences. The characteristic features of this boundary are horsts and troughs of general direction NW-SE, turning W-E. Faults cutting only the consolidated basement and the Paleozoic cover were formed during the Hercynian Orogeny in the Carboniferous and the Early Permian. Most of the older normal faults were covered by allochtonous flysch nappes forming thus the blind faults. During the last stage of the geodynamic development the Carpathians thrust sheets moved towards their present position. Displacement of the Carpathians northwards is related to development of dextral strike-slip faults of N—S direction. The orientation of this strike-slip fault zones zone more or less coincides with the surface position of the major faults perpendicular to the strike of the Outer Carpathian thrustsheets. The huge fault cuts formations from the Paleozoic basement through the flysch allochton between the boreholes in Sucha Beskidzka area. The displacement of nappes of the Carpathian overthrust and diapiric extrusion of plastic formations of the lower flysch units occurred along this fault.     

Stages in the Magura Basin: a case study of the Polish sector (Western Carpathians)

The Magura Basin domain developed in its initial stage as a Jurassic-Early Cretaceous rifted passive margin that faced the eastern parts of the oceanic Alpine Tethys. In the pre- and syn-orogenic evolution of the Magura Basin the following prominent periods can be distinguished: Middle Jurassic-Early Cretaceous syn-rift opening of basins (1) followed by Early Cretaceous post-rift thermal subsidence (2), latest Cretaceous–Paleocene syn-collisional inversion (3), Late Paleocene to Middle Eocene flexural subsidence (4) and Late Eocene - Early Miocene synorogenic closing of the basin (5). The driving forces of tectonic subsidence of the basin were syn-rift and thermal post-rift processes, as well as tectonic loads related to the emplacement of accretionary wedge. This process was initiated at the end of the Paleocene at the Pieniny Klippen Belt (PKB)/Magura Basin boundary and was completed during Late Oligocene in the northern part of the Magura Basin. During Early Miocene the Magura Basin was finally folded, thrusted and uplifted as the Magura Nappe.     

Albian and Cenomanian planktic Foraminiferida from the Trawne Beds (Pieniny Klippen Belt,Polish Carpathians)

Eighteen Albian and Cenomanian planktic Foraminiferida from the Pieniny Klippen Belt of Poland are discussed. A local biostratigraphic zonation (six zones) is proposed and certain problems of palaeoecology are reviewed. The lithostratigraphical element is the so-called Trawne Beds, a Cretaceous flysch in the Pieniny Klippen Belt.     

Late Cretaceous to Early Tertiary palaeogeography of the Western Carpathians (Slovakia) and the Eastern Alps (Austria): implications from heavy mineral data

The Late Cretaceous Brezová and Myjava Groups of the Western Carpathians in Slovakia and formations of the Gosau Group of the Northern Calcareous Alps in Lower Austria comprise similar successions of alluvial/shallow marine deposits overlain by deep water hemipelagic sediments and turbidites. In both areas the heavy mineral spectra of Late Cretaceous sediments contain significant amounts of detrital chrome spinel. In the Early Tertiary the amount of garnet increases. Cluster analysis and correspondence analysis of Coniacian/Santonian and Campanian/Early Maastrichtian heavy mineral data indicate strong similarities between the Gosau deposits of the Lunz Nappe of the north-eastern part of the Northern Calcareous Alps and the Brezova Group of the Western Carpathians. Similar source areas and a similar palaeogeographical position at the northern active margin of the Adriatic/Austroalpine plate are therefore suggested for the two tectonic units.Basin subsidence mechanisms within the Late Cretaceous of the Northern Calcareous Alps are correlated with the Western Carpathians. Subsidence during the Campanian-Maastrichtian is interpreted as a consequence of subduction tectonic erosion along the active northern margin of the Adriatic/Austroalpine plate. Analogous facies and heavy mineral associations from deep water sandstones of the Manin Unit and the Klape Unit indicate accretion of parts of the Pieniny Klippen Belt during the Late Cretaceous along the Adriatic/Austroalpine margin.     

Summary of paleomagnetic data from the Central West Carpathians of Poland and Slovakia: Evidence for the late cretaceous-early tertiary transpression

The paper reviews paleomagnetic data from the Central West Carpathians (CWC) of Poland and Slovakia. The CWC constitute an orogen deformed by pre-Tertiary and Tertiary events, situated on the internal side of the Pieniny Klippen Belt and the Tertiary Outer West Carpathian accretionary wedge. The CWC are regarded as the eastern prolongation of the Austroalpine series. There are paleomagnetic evidences for a counterclockwise rotation of the CWC after Oligocene. Having subtracted the effect of this rotation, Middle Cretaceous paleomagnetic poles from the CWC are brought into agreement with preGosau paleopoles from the Upper Austroalpine units of the Northern Calcareous Alps (NCA). It is inferred that a common clockwise rotation of the CWC and NCA had taken place between 90-60 Ma (Middle — Late Cretaceous) during the oblique convergence of the Austroalpine/Central Carpathian realm with the Penninic continental basement.     

The stratigraphic and paleoenvironmental setting of Aptian OAE black shale deposits in the Pieniny Klippen Belt, Slovak Western Carpathians

During the Jurassic and Cretaceous, the Pieniny Klippen Belt units of the Outer Western Carpathians were situated on the edge of the Paleoeuropean shelf rimming the northermost margin of the Mediterranean Tethys. During the late early Aptian humid event, Lower Cretaceous pelagic carbonate (Maiolica) sedimentation was interrupted by terrigenous input as a consequence of the first major mid-Cretaceous climate perturbations. The fluctuation of radiolarian abundance indicated an expansion of the oxygen-minimum zone due to upwelling conditions and salinity changes. Foraminifera, radiolarians, non-calcareous dinocysts, and calcareous nannofossils encountered in the West Carpathian Rochovica section enable a comparison of the black shales of the upper lower Aptian Koňhora Formation with the well-known Selli Event. Subsequent anoxia patterns (depositional, productive, and stagnant) have taken part in the depositional regime. Early Aptian climate perturbations both in the Outer Western Carpathians, Swiss Prealps (situated in a similar position on the distal southern edge of the former Paleoeuropean shelf) and/or in other parts of the world are traceable with sedimentological, biological, and chemical proxies.     

Evolution models of two flysch basins: The Northern Carpathians and the Southern Apennines

The geological evolution of the external domains of the Northern Carpathians and Southern Apennines is compared and two models of flysch basins are proposed. The first, related to a tensile stage of the orogeny, is applied only to the Northern Carpathian area during the Cretaceous; the latter, related to a compressive stage, is present in both areas during the Cenozoic. The different evolutions of the basins have counterparts in the present-day continental margin and the thinning of the crust during the tensile stage controls the flysch sedimentation in the first model and, during the compressive stage of subduction along mobile plate junctions, enables the accumulation of deposits in trench-like basins to take place.     

Detrital Cr-spinel in the Šambron–Kamenica Zone (Slovakia): evidence for an ocean-spreading zone in the Northern Vardar suture?

The Šambron–Kamenica Zone is situated on the northern margin of the Levočské vrchy mountains and Šarišskà vrchovina Highland, where the Central Carpathian Paleogene joins the Pieniny Klippen Belt. Sandstone outcrops in this area. From Cretaceous to Late Oligocene in age, these sediments suggest transport directions from S and SE. The heavy mineral assemblages of this sandstone include Cr-spinel grains, mainly displaying types II and III alpine-peridotite affinities, and are representative of Ocean Island Basalt volcanism. A sample from Upper Eocene sediments at Vit’az shows a clear change in Cr-spinel composition, which turns out to have types I and II peridotite affinities, and to derive from arc and Middle Ocean Ridge Basalt volcanism, with sediment transport directions from SW and WSW. These data indicate major variations in the Upper Eocene tectonic setting, giving constraints to paleogeographic reconstruction of the Slovak Central Carpathians.     

Cretaceous flysch and pelagic sequences of the Eastern Alps: correlations, heavy minerals, and palaeogeographic implications

Flysch and pelagic sedimentation of the Penninic and Austroalpine tectonic units of the Eastern Alps are results of the closure of the Tethyan-Vardar and the Ligurian-Piemontais Oceans as well as of the progressive deformation of the Austroalpine continental margin. The Austroalpine sequences are characterized by Lower Cretaceous pelagic limestones or minor carbonate flysch and various siliciclastic mid- and Upper Cretaceous flysch formations. Chrome spinel is the most characteristic heavy mineral delivered by the southern Vardar suture, the northern obduction belt at the South Penninic-Austroalpine margin and its continuation into the Klippen belt sensu lato of the Carpathians. The South Penninic sequences, e.g. the Arosa zone, the Ybbsitz Klippen zone and some flysch nappes also contain chrome spinel, whereas the sediments of the North Penninic Rhenodanubian flysch zone are characterized by stable minerals and garnet.     

Large counterclockwise rotation of the Inner West Carpathian Paleogene Flysch—Evidence from paleomagnetic investigations of the Podhale Flysch (Poland)

We are reporting the first paleomagnetic results from the Podhale Flysch, which crops out in the area between the Pieniny Klippen Belt and the Tatra Mts., where claystones and mudstones were drilled at 10 localities, mainly from subhorizontal strata. In all cases, the magnetic fabric was found to be typical of undeformed sediments, with well developed magnetic lineation (aligned with the sedimentary transport direction) at some of the localities; the dominant magnetic mineral was identified as magnetite, accompanied by iron sulphides. For six of the localities, with one exception for those with poorly developed lineation, we obtained statistically well-defined paleomagnetic mean directions, on AF or on combined AF and thermal demagnetization.The overall-mean paleomagnetic direction is D=298° 1=53° k=121, a95=6°, in tectonic coordinates. Similar direction was observed for Inner Carpathian flysch from the Levoča basin (Slovakia). We conclude, that the flysch of the two basins must have travelled a few hundred kilometres to the North, after the early Miocene tectonic phase: this displacement was accompanied by about 60° counterclockwise rotation with respect to Stable Europe.     

Stages of development in the Polish Carpathian Foredeep basin

In southern Poland, Miocene deposits have been recognised both in the Outer Carpathians and the Carpathian Foredeep (PCF). In the Outer Carpathians, the Early Miocene deposits represent the youngest part of the flysch sequence, while in the Polish Carpathian Foredeep they are developed on the basement platform. The inner foredeep (beneath the Carpathians) is composed of Early to Middle Miocene deposits, while the outer foredeep is filled up with the Middle Miocene (Badenian and Sarmatian) strata, up to 3,000mthick. The Early Miocene strata are mainly terrestrial in origin, whereas the Badenian and Sarmatian strata are marine. The Carpathian Foredeep developed as a peripheral foreland basin related to the moving Carpathian front. The main episodes of intensive subsidence in the PCF correspond to the period of progressive emplacement of the Western Carpathians onto the foreland plate. The important driving force of tectonic subsidence was the emplacement of the nappe load related to subduction roll-back. During that time the loading effect of the thickening of the Carpathian accretionary wedge on the foreland plate increased and was followed by progressive acceleration of total subsidence. The mean rate of the Carpathian overthrusting, and north to north-east migration of the axes of depocentres reached 12 mm/yr at that time. During the Late Badenian-Sarmatian, the rate of advance of the Carpathian accretionary wedge was lower than that of pinch-out migration and, as a result, the basin widened. The Miocene convergence of the Carpathian wedge resulted in the migration of depocentres and onlap of successively younger deposits onto the foreland plate.     

Calpionellid zones of the Tithonian–Berriasian exotic limestone clasts from the Outer Carpathians,Poland

Calpionellids and chitinoidellids were identified from exotic limestone clasts occurring in flysch deposits of the Early Cretaceous to Oligocene age from the Silesian and Subsilesian nappes of the Polish Outer Carpathians. They represent the remnants of carbonate sedimentation along the northern and southern margin of the Severin-Moldavidic Basin, areas which are no longer preserved on the surface. Chitinoidellid and calpionellid assemblages characterize the Chitinoidella, Crassicollaria and Calpionella zones (latest early Tithonian–early Berriasian). The calpionellid zonation for the Western Carpathians was used for the present study, but some difficulties were encountered resulting from the application of this zonation. Cathodoluminescence imaging (CL) was useful for the identification of these microfossils in samples containing sparse and poorly preserved specimens, especially in the studied shallow-water limestone (the so-called Štramberk-type limestones).     

Albian and Cenomanian palaeobathymetry in the Pieniny Klippen Belt Basin, Polish Carpathians

During the Albian and Cenomanian, the Pieniny Klippen Belt Basin, a part of the Carpathian geosynclinal domain, showed a clear differentiation into an axial deepest part represented by the Pieniny and Branisko successions and two marginal zones, a southern (Nizna and Haligovce successions, in Slovakia) and a northern zone (in Poland and Slovakia) represented by the Niedzica, Czertezik and Czorsztyn successions, becoming progressively more shallow towards the north. Five palaeobathymetric foraminiferal associations have been distinguished in the axial and northern marginal zone sediments of the Klippen Basin, corresponding to: ‘A’ shelf and upper slope: relatively large proportion of nodosariids and miliolids (Czorsztyn succession); ‘B1’ middle part of slope; oligotaxic planktonic assemblage dominant (Niedzica through Branisko successions and northern part of the Pieniny succession); ‘B2’ middle part of slope: larger proportion of agglutinated foraminifers, association characteristic of sediments influenced by turbidites (submarine flyschoid channels in the Branisko succession); ‘Cl’ middle and lower parts of slope: scarce microfauna, Hedbergella and textularids dominant (Pieniny succession, middle part); ‘C2’ slope/abyssal plain transition, close to foraminiferal lysocline (probably about 3500m below sea level): scarce specimens corroded and slightly dissolved (Pieniny succession, southern part).     

Foraminiferal biostratigraphy of the Albian and Cenomanian sediments in the Polish part of the Pieniny Klippen Belt,Carpathian Mountains

Seven local biostratigraphic zones have been distinguished in the Albian and Cenomanian sediments of the Pieniny Klippen Belt: Hedbergella assemblage (Assemblage Zone, AZ), R. subticinensis-R. ticinensis (Concurrent Range Zone, CRZ), R. ticinensis- P. praebuxtorfi (CRZ), R. ticinensis- P. buxtorfi (Partial Concurrent Range Zone, PCRZ), P. buxtorfi- R. appenninica (CRZ), R. appenninica (Partial Range Zone, PRZ) and R. reicheli- R. green-hornensis (PCRZ), The zones are tentatively correlated with the ortho- and parastratigraphic zones of the Albian and Cenomanian. Three palaeoecological associations have been distinguished: “Czorsztyn”, shelf-upper slope, large proportion of nodosarids and miliolids; “Pieniny A” middle part of slope, oligotaxic planktonic assemblages dominant; “Pieniny B”, depth similar to that of “Pieniny A”, larger proportion of agglutinated foraminifers. All fall within the “Marssonella” association sensu Haig, 1979, Haig, 1979. Layers of black shales, interpreted to reflect Cretaceous oceanic anoxic events, are correlated between successions of the Pieniny Klippen Belt, and their biostratigraphical position is determined.     

“Cretaceous black flysch” in the Pieniny Klippen Belt, West Carpathians: a case of geological misinterpretation

This is a critical assessment of the paper by Oszczypko et al. (2004: Cretaceous Research 25, 89–113), in which they tried to prove a mid-Cretaceous age for the Szlachtowa (“black flysch”) and Opaleniec Formations, in the Pieniny Klippen Belt, West Carpathians, both of which had previously been shown to be of Jurassic age. We argue that the mid-Cretaceous age assignment is a misinterpretation, primarily resulting from their field samples having been collected from some Cretaceous lithostratigraphic units, tectonically associated with the Jurassic formations, and/or from tectonic contact-breccias involving Jurassic and Cretaceous strata. In addition, we suggest that they have overlooked a number of significant palaeontological papers, published since 1962, which record the presence of in situ ammonites, aptychi, belemnites, thin-shelled bivalves (Bositra), gryphaeids, foraminifera, and ostracod assemblages, all indicating a Jurassic (mainly Aalenian), and not a Cretaceous, age for the Szlachtowa Formation, and also the in situ Jurassic (Bajocian) ammonites and thin-shelled bivalves (Bositra), Bositra-microfacies, and age-diagnostic foraminiferal assemblages of the Opaleniec Formation.Our presentation here of recently published dinocyst data from well-preserved assemblages further supports the Jurassic ages for the Szlachtowa (“black flysch”) and Opaleniec Formations.     

Plate tectonic evolution of the southern margin of Eurasia in the Mesozoic and Cenozoic

Thirteen time interval maps were constructed, which depict the Triassic to Neogene plate tectonic configuration, paleogeography and general lithofacies of the southern margin of Eurasia. The aim of this paper is to provide an outline of the geodynamic evolution and position of the major tectonic elements of the area within a global framework. The Hercynian Orogeny was completed by the collision of Gondwana and Laurussia, whereas the Tethys Ocean formed the embayment between the Eurasian and Gondwanian branches of Pangea. During Late Triassic–Early Jurassic times, several microplates were sutured to the Eurasian margin, closing the Paleotethys Ocean. A Jurassic–Cretaceous north-dipping subduction boundary was developed along this new continental margin south of the Pontides, Transcaucasus and Iranian plates. The subduction zone trench-pulling effect caused rifting, creating the back-arc basin of the Greater Caucasus–proto South Caspian Sea, which achieved its maximum width during the Late Cretaceous. In the western Tethys, separation of Eurasia from Gondwana resulted in the formation of the Ligurian–Penninic–Pieniny–Magura Ocean (Alpine Tethys) as an extension of Middle Atlantic system and a part of the Pangean breakup tectonic system. During Late Jurassic–Early Cretaceous times, the Outer Carpathian rift developed. The opening of the western Black Sea occurred by rifting and drifting of the western–central Pontides away from the Moesian and Scythian platforms of Eurasia during the Early Cretaceous–Cenomanian. The latest Cretaceous–Paleogene was the time of the closure of the Ligurian–Pieniny Ocean. Adria–Alcapa terranes continued their northward movement during Eocene–Early Miocene times. Their oblique collision with the North European plate led to the development of the accretionary wedge of the Outer Carpathians and its foreland basin. The formation of the West Carpathian thrusts was completed by the Miocene. The thrust front was still propagating eastwards in the eastern Carpathians.During the Late Cretaceous, the Lesser Caucasus, Sanandaj–Sirjan and Makran plates were sutured to the Iranian–Afghanistan plates in the Caucasus–Caspian Sea area. A north-dipping subduction zone jumped during Paleogene to the Scythian–Turan Platform. The Shatski terrane moved northward, closing the Greater Caucasus Basin and opening the eastern Black Sea. The South Caspian underwent reorganization during Oligocene–Neogene times. The southwestern part of the South Caspian Basin was reopened, while the northwestern part was gradually reduced in size. The collision of India and the Lut plate with Eurasia caused the deformation of Central Asia and created a system of NW–SE wrench faults. The remnants of Jurassic–Cretaceous back-arc systems, oceanic and attenuated crust, as well as Tertiary oceanic and attenuated crust were locked between adjacent continental plates and orogenic systems.     

Late neogene-quaternary tectonics of the polish Carpathians in the light of neotectonic mapping

A new neotectonic map of the Polish Carpathians, constructed on the basis of morphometric, geological, geophysical and geomorphological data, is presented. A number of morphostructures, dependent upon faults, deep crustal fractures, the thickness of flysch deposits and geophysical properties of the Carpathian substratum, have been distinguished.Neotectonic movements are regarded as being Badenian-Sarmatian and Plio-Quaternary in age, their amplitudes ranging from 2000 to 500 m. The observed neotectonic differentiation of structural elements is the combined effect of the mobility of the Carpathian substratum and of horizontal movements of the flysch nappes.     

Oil/source rock correlations in the Polish Flysch Carpathians and Mesozoic basement and organic facies of the Oligocene Menilite Shales: insights from hydrous pyrolysis experiments

The Oligocene Menilite Shales in the study area in the Polish Flysch Carpathians are organic-rich and contain varying mixtures of Type-II, Type-IIS and Type-III kerogen. The kerogens are thermally immature to marginally mature based on atomic H/C ratios and Rock-Eval data. This study defined three organic facies, i.e., sedimentary strata with differing hydrocarbon-generation potentials due to varying types and concentrations of organic matter. These facies correspond to the Silesian Unit and the eastern and western portions of the Skole Unit. Analysis of oils generated by hydrous pyrolysis of outcrop samples of Menilite Shales demonstrates that natural crude oils reservoired in the flysch sediments appear to have been generated from the Menilite Shales. Natural oils reservoired in the Mesozoic basement of the Carpathian Foredeep appear to be predominantly derived and migrated from Menilite Shales, with a minor contribution from at least one other source rock most probably within Middle Jurassic strata. Definition of organic facies may have been influenced by the heterogeneous distribution of suitable Menilite Shales outcrops and producing wells, and subsequent sample selection during the analytical phases of the study.