Geometry and evolution of superposed folding in the Zawar lead-zinc mineralised belt,Rajasthan

The lead-zinc bearing Proterozoic rocks of Zawar, Rajasthan, show classic development of small-scale structures resulting from superposed folding and ductile shearing. The most penetrative deformation structure noted in the rocks is a schistosity (S ₁) axial planar to a phase of isoclinal folding (F ₁). The lineations which parallel the hinges ofF ₁ folds are deformed by a set of folds (F ₂) having vertical or very steep axial planes. At many places a crenulation cleavage (S ₂) has developed subparallel to the axial planes ofF ₂ folds, particularly in the psammopelitic rocks. The plunge and trend ofF ₂ folds vary widely over the area. Deformation ofF ₂ folds into hook-shaped geometry and development of another set of axial planar crenulation cleavage are the main imprints of the third generation folds (F ₃) in the region. In addition to these, there are at least two other sets of cleavage planes with corresponding folds in small scales. More common among these is a set of recumbent and reclined folds (F ₄), developed on steeply dipping early-formed planes. Kink bands and associated sharp-hinged folds represent the other set (F ₅). Two major refolded folds are recognizable in the map pattern of the Zawar mineralised belt. The larger of the two, the Main Zawar Fold (MZF), shows a broad hook-shaped geometry. The other large-scale structure is the Zawarmala fold, lying south-west of the MZF. Both the major structures show truncation of lithological units along their respective east ‘limbs’, and extreme variation in the width of formations. The MZF is primarily the result of superimposition ofF ₃ onF ₂.F ₁ folds are relatively smaller in scale and are recognizable in the quartzite unit which responded to deformation mainly by buckle shortening. Large-scale pinching-and-swelling that appears in the outcrop pattern seems to be a pre-F₂ feature. The structural evolutionary model worked out to explain the chronology of the deformational features and the large-scale out-crop pattern envisages extreme east-west shortening following formation ofF ₁ structures, resulting in the formation of tight and isoclinal antiforms (F ₂) with pinched-in synforms in between. These latter zones evolved into a number of ductile shear zones (DSZs). The east-west refolding of the large-scaleF ₂ isoclinal antiforms seems to be the consequence of a continuous deformation and resultant migration of folds along the DSZs. The main shear zone which wraps the Zawar folds followed a curved path. Because of the penetrative nature of theF ₂ movement, the early lineations which were at high angles to the later ones (as is evident in the west of Zawarmala), became subparallel to the trend ofF ₂ folding over a large part of the area. Further, the virtually coaxial nature ofF ₂ andF ₃ folds and the refolding ofF ₃ folds by a new set of N-S folds is an indication of continuous progressive deformation.     

Structural history of the Arthur Lineament,northwest Tasmania: An analysis of critical outcrops

The Arthur Lineament of northwestern Tasmania is a Cambrian (510 ± 10 Ma) high‐strain metamorphic belt. In the south it is composed of metasedimentary and mafic meta‐igneous lithologies of the ‘eastern’ Ahrberg Group, Bowry Formation and a high‐strain part of the Oonah Formation. Regionally, the lineament separates the Rocky Cape Group correlates and ‘western’ Ahrberg Group to its west from the relatively low‐strain parts of the Oonah Formation, and the correlated Burnie Formation, to its east. Early folding and thrusting caused emplacement of the allochthonous Bowry Formation, which is interpreted to occur as a fault‐bound slice, towards the eastern margin of the parautochthonous ‘eastern’ Ahrberg Group metasediments. The early stages of formation of the Arthur Lineament involved two folding events. The first deformation (CaD₁) produced a schistose axial‐planar fabric and isoclinal folds synchronous with thrusting. The second deformation (CaD₂) produced a coarser schistosity and tight to isoclinal folds. South‐plunging, north‐south stretching lineations, top to the south shear sense indicators, and south‐verging, downward‐facing folds in the Arthur Lineament suggest south‐directed transport. CaF₁ and CaF₂ were rotated to a north‐south trend in zones of high strain during the CaD₂ event. CaD₃, later in the Cambrian, folded the earlier foliations in the Arthur Lineament and produced west‐dipping steep thrusts, creating the linear expression of the structure.     

Deformational history of the Precambrian Kolar Schist Belt,South India: Constraints for the tectonic evolution

In the Kolar Schist Belt well-preserved small-scale diastrophic structures suggest four phases of folding (F₁ — F₄). The near coaxial F₁ andF ₂folds are both isoclinal with long-drawn out limbs and sharp hinges. The axial planes of bothF ₁andF ₂folds are subvertical with N-S strikes; these control the linear outcrop pattern of the Schist belt. The later folds (F ₃and F₄) are important in small-to-intermediate scales only and are accommodation structures formed during the relaxation period of the early folding episodes. Mesoscopic shear zones, post-F₂ but pre-F₃ in age, are present in all the rock types in this area. The F₁ and F₂ folds and the mesoscopic shear zones were formed during a continuous E-W subhorizontal compression. Available geochemical and isotopic data show that the Kolar Schist Belt with ensimatic setting is bounded by two granitic terrains of contrasting evolutionary histories. This, together with E-W subhorizontal compression over a protracted period of time, strengthens the recent suggestions that the Kolar Schist Belt represents a suture. This belt then marks the site of a continent-continent collision event of late Archaean-early Proterozoic age.     

Planar, non-planar and refolded sheath folds in the Phulad Shear Zone, Rajasthan, India

Progressive ductile shearing in the Phulad Shear Zone of Rajasthan, India has produced a complex history of folding, with development of planar, non-planar and refolded sheath folds. There are three generations of reclined folds, F₁, F₂ and F₃, with a striping lineation (L₁) parallel to the hinge lines of F₁. The planar sheath folds of F₁ have long subparallel hinge lines at the flanks joining up in hairpin curves at relatively small apices. L₁ swerves harmoniously with the curving of F₁ hinge line. There is a strong down-dip mineral lineation parallel to the striping lineation in most places, but intersecting it at apices of first generation sheath folds. Both the striping and the mineral lineation are deformed in U-patterns over the hinges of reclined F₂ and F₃. Folding of axial surfaces and hinge lines of earlier reclined folds by later folds was accompanied by very large stretching and led to the development of non-planar sheaths. The reclined folds of all the three generations were deformed by a group of subhorizontal folds. Each generation of fold initially grew with the hinge line at a very low angle with the Y-axis of bulk non-coaxial strain and was subsequently rotated towards the down-dip direction of maximum stretching. The patterns of deformed lineations indicate that the stretching along the X-direction was extremely large, much in excess of 6000 percent.     

Structural pattern and strain history of a superposed fold system in the Precambrian of Central Rajasthan,India. I. Structural pattern in the ‘main Raialo syncline’, Central Rajasthan

Marble, calc-silicate rock, quartzite and mica schist of Precambrian age in the ‘main Raialo syncline’ in the Udaipur district of central Rajasthan, India, have been affected by folding of four main generations (F₁–F₄), the first two of which are seen in the scale of map to microsection. The very tight to isoclinal F₁ folds with long limbs and thickened hinges are generally reclined or inclined, and plunge gently castward or westward where least reoriented. The axial planes of the F₁ folds have been involved in upright warps on east-west axes (F₁′), nearly coaxial with the F₁ folds, in some sectors. These folds have been overprinted by upright F₂ folding of varying tightness with the axial planes striking north to northeast, resulting in interference patterns of different types in all scales. A penetrative axial plane foliation related to F₁ folding and a crenulation cleavage parallel to the F₂ axial pianes are seen in the micaceous rocks. Two sets of conjugate folds and kink bands of smail scale have been superimposed on the F₁–F₂ folds in thinly foliated rocks. The first of these sets (F₃) has its conjugate axial planes dipping gently northeast and southwest, whereas the paired axial planes of the later set (F₄) are vertical with north-northwest and east-west strikes.     

Structural analysis and implicit 3D modelling of high-grade host rocks to the Venetia kimberlite diatremes,Central Zone,Limpopo Belt,South Africa

The Beit Bridge Complex of the Central Zone (CZ) of the Limpopo Belt hosts the 519 ± 6 Ma Venetia kimberlite diatremes. Deformed shelf- or platform-type supracrustal sequences include the Mount Dowe, Malala Drift and Gumbu Groups, comprising quartzofeldspathic units, biotite-bearing gneiss, quartzite, metapelite, metacalcsilicate and ortho- and para-amphibolite. Previous studies define tectonometamorphic events at 3.3–3.1 Ga, 2.7–2.5 Ga and 2.04 Ga. Detailed structural mapping over 10 years highlights four deformation events at Venetia. Rules-based implicit 3D modelling in Leapfrog Geo™ provides an unprecedented insight into CZ ductile deformation and sheath folding. D₁ juxtaposed gneisses against metasediments. D₂ produced a pervasive axial planar foliation (S₂) to isoclinal F₂ folds. Sheared lithological contacts and S₂ were refolded into regional, open, predominantly southward-verging, E–W trending F₃ folds. Intrusion of a hornblendite protolith occurred at high angles to incipient S₂. Constrictional-prolate D₄ shows moderately NE-plunging azimuths defined by elongated hornblendite lenses, andalusite crystals in metapelite, crenulations in fuchsitic quartzite and sheath folding. D₄ overlaps with a: 1) 2.03–2.01 Ga regional M₃ metamorphic overprint; b) transpressional deformation at 2.2–1.9 Ga and c) 2.03 Ga transpressional, dextral shearing and thrusting around the CZ and d) formation of the Avoca, Bellavue and Baklykraal sheath folds and parallel lineations.     

The metamorphic and structural evolution of the Phyllite-Quartzite Nappe of western Crete

The Phyllite-Quartzite (PQ) Nappe constitutes an external, allochthonous complex of the Hellenides on the island of Crete and shows a polyphase structural history. A first phase of deformation (F 1) produced recumbent isoclinal folds, a penetrative schistosity, and boudinage under high-P/low-T metamorphic conditions. Mylonite formation at the top of the PQ Nappe, below the overriding Tripolitza Nappe, further boudinage, and schistosity (S 2) represent a late tectono-metamorphic episode. Post-metamorphic small folds (F 3), lineations, and a crenulation cleavage were formed synchronously with transport of the PQ Nappe. A last phase (F 4) developed small folds, a fracture/crenulation cleavage, and large-scale folds after nappe movement. It is suggested that high-P/low-T metamorphism in the PQ rocks originated during subduction. Nappe transport of the higher, unmetamorphosed units, which were thrust over the PQ Nappe, began under waning metamorphic conditions. Subsequent transport of the PQ Nappe itself also occurred after the completion of metamorphism and after the formation of the mylonite at its top.     

Deformation style in the Granulite-charnockite province of South India: An example from the Kusulmalai area in Salem district,Tamil Nadu,India

A multiple-deformation sequence is established for different types of gneisses, mafic-paleosomes and banded magnetite quartzites (BMQ) exposed within the area. In gneisses, the basin-shaped map pattern represents the type-i interference structure formed due to the overprinting of F₃ folds with ENE striking axial planes on F₂ folds with axial planes striking NNW. The BMQ band occurring as an enclave within the gneissic country, represents a large scale F₁ fold with relatively smaller scale F₂ folds developed on its limbs. Mafic-paleosomes within the streaky-charnockitic-gneisses exhibit structures formed due to the interference of more than two phases of folding (F₁,F_la,F₂,F₃). It is shown that the deformation plan in these rocks is consistent with the generalized deformation scheme for Granite-greenstone belts. The difference in the map pattern of Granite-greenstone belts and Granulite-charnockite terrains is ascribed to the variance in Theological properties, layerthickness ratios and local displacement directions during different phases of folding. These differences apart, both the Granite-greenstone and Granulite-charnockite provinces in South India are deformed by an early isoclinal folding which is successively overprinted by folding on NNW and ENE striking axial planes.     

Structural geometry of the early Precambrian terrane south of Coimbatore in the “Palghat Gap”, southern India

The ENE-plunging macroscopic folds, traced by calc gneiss interbanded with marble and sillimanite schist within the Peninsular Gneiss around Suganapuram in the ‘Palghat gap’ in southern India, represent structures of the second generation (D₂). They have folded the axial planes of a set of D₁ isoclinal folds on stratification coaxially, so that the mesoscopic D₁ folds range from reclined in the hinge zones, through inclined to upright in the limb zones of the D₂ folds. Orthogonal relation between stratification and axial planar cleavage, and ‘M’ shaped folds on layering locate the hinge zones of the D₁ folds, whereas folds on axial planar cleavage with ‘M’ shaped folds are the sites of the D₂ fold hinges. Extreme variation in the shapes of the isoclinal D₁ folds from class 1B through class 1C to nearly class 2 of Ramsay is a consequence of buckling followed by flattening on layers of widely varying viscosity contrast. The large ENE-trending structures in this supracrustal belt within the Peninsular Gneiss in the ‘Palghat gap’ could not have evolved by reorientation of NS-trending structures of the Dharwar tectonic province to the north by movement along the Moyar-Bhavani shear zone which marks the boundary between the two provinces. This is because the Moyar and Bhavani faults are steep dipping reverse faults with dominant dip-slip component. Deceased     

Structural pattern and strain history of a superposed fold system in the Precambrian of Central Rajasthan,India. II. Strain history

Analysis of shapes of folds, together with other structures such as axial plane foliation boudinage, mullions and cross joints, show that the F₁ folds in the ‘main Raialo syncline’ were formed by buckling, and were subsequently modified by flattening normal to the axial planes and lengthening along the axis. The apparent buckle shortening of the F₁ folds generally ranges between 70 and 80%. The folds were formed by simple shear (giving place to pure shear at certain stages) in an almost north-south direction on subhorizontal beds. Progressive deformation in the later stage of F₁ folding resulted in gentle upright folding of F₁ axial planes on F₁′ axes slightly oblique to F₁. The F₂ folds, whose average shortening ranges from 20 to 30%, were also formed by buckling caused by horizontal compression in a nearly northwest-southeast direction. This folding was preceded and followed in some instances by homogeneous strain, as deduced fro mthe shapes of the F₂ folds and the nature of variation of the F₁ lineations. The F₃ conjugate structures developed when the maximum compressive strain was vertical and the intermediate compressive strain northwest-southeast, almost normal to the subvertical F₂ axial planes. The increase in the amplitude of the F₂ folds in the last phase of F₂ folding in certain zones resulted in an excess of vertical load, which dissipated with the formation of the F₃ structures. In the last stage of movement (F₄) the maximum compressive strain became horizontal along the strike of F₂ axial planes, whereas the minimum compressive strain was normal to them. The F₄ structures, therefore, point to a longitudinal shortening with reference to large scale F₂ folding.     

Deformation history of the Paleoproterozoic Liaohe assemblage in the eastern block of the North China Craton

The Paleoproterozoic Liaohe assemblage and associated Liaoji granitoids represent the youngest basement in the Eastern Block of the North China Craton. Various structural elements and metamorphic reaction relations indicate that the Liaohe assemblage has experienced three distinct deformational events (D₁ to D₃) and four episodes of metamorphism (M₁ to M₄). The earliest greenschist facies event (M₁) is recognized in undeformed or weakly deformed domains wrapped by the S₁ schistosity, suggesting that M₁ occurred before D₁. The D₁ deformation produced small, mostly meter-scale, isoclinal and recumbent folds (F₁), an associated penetrative axial planar schistosity (S₁), a mineral stretching lineation (L₁) and regional-scale ductile shear zones. Concurrent with D₁ was M₂ metamorphism, which occurred before D₂ and produced low- to medium-pressure amphibolite facies assemblages. Regionally divergent motion senses reflected by the asymmetric F₁ folds and other sense-of-shear indicators, together with the radial distribution of the L₁ lineation surrounding the Liaoji granitoids, imply that D₁ represents an extensional event. The D₂ deformation produced open to tight F₂ folds of varying scales, S₂ axial crenulation cleavages and ENE-NE-striking thrust faults, involving broadly NW–SE compression. Following D₂ was M₃ metamorphism that led to the formation of sillimanite and cordierite in low-pressure type rocks and kyanite in medium-pressure rocks. The last deformational event (D₃) formed NW-WNW-trending folds (F₃), axial planar kink bands, spaced cleavages (S₃), and strike–slip and thrust faults, which deflect the earlier D₁ and D₂ structures. D₃ occurred at a shallow crustal level and was associated with, or followed by, a greenschist facies retrograde metamorphic event (M₄).The Liaohe assemblage and associated Liaoji granitoids are considered to have formed in a Paleoproterozoic rift, the late spreading of which led to the occurrence of the early extensional deformation (D₁) and the M₁ and M₂ metamorphism, and the final closing of which was associated with the D₂ and D₃ phases of deformation and M₃ and M₄ metamorphism.     

Progressive deformation and the rotation of contemporary fold axes in the Ballybofey Nappe,north-west Ireland

Internal regions of orogenic belts may be characterized by an alignment of fold axes with mineral elongation lineations. This relationship is commonly interpreted as representing progressive tightening and rotation towards the shear direction of early buckle folds, the hinges of which were initiated orthogonal to this direction. Detailed structural analysis of lower amphibolite facies Dalradian metasediments of the Ballybofey (fold) Nappe, north-west Ireland, shows that an intense S₃ schistosity is developed axial planar to mesoscopic and minor F₃ folds. In areas of low D₃ strain, F₃ fold axes plunge gently towards the north-east, whereas in regions of greater strain plunges are towards the south-east subparallel to the constant mineral lineation. Minor folds which initiated at angles of 70–80° from the mineral lineation subsequently rotated towards the shear direction in a consistent clockwise sense. Progressive and variable non-coaxial deformation oblique to the original mean F₃ orientation has resulted in a unimodal distribution pattern of fold axes. Analysis of the angular rotation of fold axes enables estimates of the bulk shear strain to be evaluated and models of progressive deformation to be assessed.     

On the deformation sequence in the New Harbour Group of Holy Island,Anglesey, North Wales

Four phases of deformation are recorded by minor structures in the New Harbour Group (NHG) of southern Holy Island. The regional schistosity in these rocks is a differentiated crenulation cleavage of D₂ age. An earlier preferred orientation (S₁) is commonly preserved as crenulations within the Q-domain microlithons of the S₂ schistosity and is demonstrably non-parallel to bedding. F₃ folds are widely developed in S₂ and, to a lesser extent, in bedding. S₃ crenulation cleavage is sporadically developed but can be intense locally. A major antiformal fold exists in the NHG near Rhoscolyn. This fold is of D₃ age since it clearly deforms S₂ schistosity and is consistent with the vergence of F₃ minor structures. All planar structures are deformed by folds of D₄ age. © 1997 John Wiley & Sons, Ltd.     

Transpressional regime in southern Arabian Shield: Insights from Wadi Yiba Area, Saudi Arabia

Detailed field-structural mapping of Neoproterozoic basement rocks exposed in the Wadi Yiba area, southern Arabian Shield, Saudi Arabia illustrates an important episode of late Neoproterozoic transpression in the southern part of the Arabian-Nubian Shield (ANS). This area is dominated by five main basement lithologies: gneisses, metavolcanics, Ablah Group (meta-clastic and marble units) and syn- and post-tectonic granitoids. These rocks were affected by three phases of deformation (D₁–D₃). D₁ formed tight to isoclinal and intrafolial folds (F₁), penetrative foliation (S₁), and mineral lineation (L₁), which resulted from early E-W (to ENE-WSW) shortening. D₂ deformation overprinted D₁ structures and was dominated by transpression and top-to-the-W (?WSW) thrusting as shortening progressed. Stretching lineation trajectories, S-C foliations, asymmetric shear fabrics and related mylonitic foliation, and flat-ramp and duplex geometries further indicate the inferred transport direction. The N- to NNW-orientation of both “in-sequence piggy-back thrusts” and axial planes of minor and major F₂ thrust-related overturned folds also indicates the same D₂ compressional stress trajectories. The Wadi Yiba Shear Zone (WYSZ) formed during D₂ deformation. It is one of several N-S trending brittle-ductile Late Neoproterozoic shear zones in the southern part of the ANS. Shear sense indicators reveal that shearing during D₂ regional-scale transpression was dextral and is consistent with the mega-scale sigmoidal patterns recognized on Landsat images. The shearing led to the formation of the WYSZ and consequent F₂ shear zone-related folds, as well as other unmappable shear zones in the deformed rocks. Emplacement of the syn-tectonic granitoids is likely to have occurred during D₂ transpression and occupied space created during thrust propagation. D₁ and D₂ structures are locally overprinted by mesoscopic- to macroscopic-scale D₃ structures (F₃ folds, and L₃ crenulation lineations and kink bands). F₃ folds are frequently open and have steep to subvertical axial planes and axes that plunge ENE to ESE. This deformation may reflect progressive convergence between East and West Gondwana.     

Influence of differential basement mobility on contrasting structural styles in the cover rocks: An example from Early Precambrian rocks east of Udaipur,Rajasthan

Detailed structural and lithological mapping of the Aravalli rocks overlying the Mewar Gneiss in the area east of Udaipur, Rajasthan, suggests presence of blocks bounded by faults, showing a contrasting structural pattern. The contrast is reflected in the differential development and in the orientation of AF1, AF2 and AF4 folds in different blocks. In the central Umra block, the rocks constitute a virtually homoclinal sequence showing one dominant orientation of bedding and axial planar schistosity. Fold axes, lineations andβ orientations indicate presence of reclined folds of AF1 generation. AF2 folds are either absent or have developed only locally. The two other blocks which border the Umra block show development of large AF2 synforms and local minor antiforms having N-S or NNE-SSW trend. The folds interfere with AF4 folds producing irregular domes and basins in the western Kanpur-Kalarwas Block and minor plunge reversals in Bagdara-Dhamdhar Block. It is argued that the constituents of the different blocks which formed a collage of rift basins and horsts during sedimentation, responded differentially to deforming forces because of differential mobility of the underlying basement.     

Evolution of the Mount Woods Inlier, northern Gawler Craton, Southern Australia: an integrated structural and aeromagnetic analysis

Structural mapping integrated with interpretation and forward modelling of aeromagnetic data form complimentary and powerful tools for regional structural analysis because both techniques focus on architecture and overprinting relationships. This approach is used to constrain the geometry and evolution of the sparsely exposed Mount Woods Inlier in the northern Gawler Craton. The Mount Woods Inlier records a history of poly-phase deformation, high-temperature metamorphism, and syn- and post-orogenic magmatism between ca. 1736 and 1584 Ma. The earliest deformation involved isoclinal folding, and the development of bedding parallel and axial planar gneissic foliation (S₁). This was accompanied by high-temperature, upper amphibolite to granulite facies metamorphism at ca. 1736 Ma. During subsequent north–south shortening (D₂), open to isoclinal south–southeast-oriented F₂ folds developed as the Palaeoproterozoic successions of the inlier were thrust over the Archaean nuclei of the Gawler Craton. The syn-D₂ Engenina Adamellite was emplaced at ca. 1692 Ma. The post-D₂ history involved shear zone development and localised folding, exhumation of metamorphic rocks, and deposition of clastic sediments prior to the emplacement of the ca. 1584 Ma Granite Balta Suite. The Mount Woods Inlier is interpreted as the northern continuation of the Kimban Orogen.     

鞍山附近“樱桃园组”的构造样式及其时代讨论

本文区分了“樱桃园组”岩石在元古主构造旋回的三幕变形,详细描述了各幕SFL组合和按区段进行了投影。主变形幕D₁的构造最发育,F₁控制着本区的岩性分布。构造序列及样式变化显示由高塑性向脆性的变形格式。本组与下伏的太古鞍山群变粒岩在构造序列、样式和变质相上都有显著差异,过去许多地质学家把二者混划为一个单位,统名“鞍山群”,属太古宙。但本组与上覆的辽河群(上元古)的构造样式和变质相却相似,故其时代相当于早元古Ferrian期。     

The sheath folds in the Tananao Group between Tienshiang and Tailuko, east-west cross-island highway, Taiwan

Sheath folds or “eye” folds on decimetric to metric scales are well-developed in the metachert-marble-green rock interlayers of the Changchun Formation and in the marble lens of the Tienhsiang Formation, within the Tananao Group between Tienhsiang and Tailuko, along E-W cross-island highway of Taiwan. Closely associated with the sheath folds are the tight to isoclinal folds with rectilinear axes which are parallel to the hinge line of the “eyes”, and the directions of these folds range from N-S to N30°E with gentle plunges to the north or south.The sheath folds are believed to have been formed during the second phase of deformation in this region. The traces of the earlier folding can generally be found at the hinges or limbs of these sheath folds.The explanation presented here is that the sheath fold might be generated episodically during the F₂ deformational phase throughout the entire history of progressive shearing as a result of episodic instability of the flow with successive refolding of metamorphic fabric, during Plio-Pleistocene deformation of Taiwan.     

Structural pattern in the Precambrian rocks of Sonua-Lotapahar region,North Singhbhum,eastern India

In the western part of the North Singhbhum fold belt near Lotapahar and Sonua the remobilized basement block of Chakradharpur Gneiss is overlain by a metasedimentary assemblage consisting of quartz arenite, conglomerate, slate-phyllite, greywacke with volcanogenic material, volcaniclastic rocks and chert. The rock assemblage suggests an association of volcanism, turbidite deposition and debris flow in the basin. The grade of metamorphism is very low, the common metamorphic minerals being muscovite, chlorite, biotite and stilpnomelane. Three phases of deformation have affected the rocks. The principal D1 structure is a penetrative planar fabric, parallel to or at low angle to bedding. No D1 major fold is observed and the regional importance of this deformation is uncertain. The D2 deformation has given rise to a number of northerly plunging major folds on E-W axial planes. These have nearly reclined geometry and theL ₂lineation is mostly downdip on theS ₂surface, though some variation in pitch is observed. The morphology of D2 planar fabric varies from slaty cleavage/schistosity to crenulation cleavage and solution cleavage. D3 deformation is weak and has given rise to puckers and broad warps on schistosity and bedding. The D2 major folds south of Lotapahar are second order folds in the core of the Ongarbira syncline whose easterly closure is exposed east of the mapped area. Photogeological study suggests that the easterly and westerly closing folds together form a large synclinal sheath fold. There is a continuity of structures from north to south and no mylonite belt is present, though there is attenuation and disruption along the fold limbs. Therefore, the Singhbhum shear zone cannot be extended westwards in the present area. There is no evidence that in this area a discontinuity surface separates two orogenic belts of Archaean and Proterozoic age.     

Deformation history of the Hampden Synform in the Eastern Fold Belt of the Mt Isa terrane

The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L¹ ₀ intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.