Late Cretaceous and Cenozoic sea-level estimates: backstripping analysis of borehole data, onshore New Jersey

Backstripping analysis of the Bass River and Ancora boreholes from the New Jersey coastal plain (Ocean Drilling Project Leg 174AX) provides new Late Cretaceous sea‐level estimates and corroborates previously published Cenozoic sea‐level estimates. Compaction histories of all coastal plain boreholes were updated using porosity–depth relationships estimated from New Jersey coastal plain electric logs. The new porosity estimates are considerably lower than those previously calculated at the offshore Cost B‐2 well. Amplitudes and durations of sea‐level variations are comparable in sequences that are represented at multiple boreholes, suggesting that the resultant curves are an approximation of regional sea level. Both the amplitudes and durations of third‐order (0.5–5 Myr) cycles tend to decrease from the Late Cretaceous to the late Miocene. Third‐order sea‐level amplitudes in excess of 60 m are not observed. Long‐term (10⁸–10⁷ years) sea level was approximately constant at 30–80 m in the Late Cretaceous, rose to a maximum early Eocene value of approximately 100–140 m, and then fell through the Eocene and Oligocene.     

Subsidence, sedimentation and sea-level changes in the Eromanga Basin, Australia

Abstract The Jurassic-Cretaceous subsidence history of the Eromanga Basin, a large intracratonic sedimentary basin in central eastern Australia, has been examined using standard backstripping techniques, allowing for porosity reduction by compaction and cementation. Interpretation of the results suggests that during the Jurassic the basin was subsiding in a manner consistent with the exponentially decreasing form predicted by simple thermally based tectonic models. By the Early Cretaceous, the rate of subsidence was considerably higher than that expected from such models and nearly half of the total sediment thickness was deposited over the final 20 Myr of the basin's 95 Myr Mesozoic depositional history. The Early Cretaceous also marks the first marine incursion into the basin, consistent with global sea-level curves. Subsequently, however, the sediments alternate between marine and non-marine, with up to 1200 m of fluvial sediments being deposited, and this was followed by a depositional hiatus of about 50 Myr in the Late Cretaceous. This occurred at a time when global sea-level was rising to its peak. A model is presented which is consistent with the rapid increase in tectonic subsidence rate and the transgressive-regressive nature of the sediments. The model incorporates a sediment influx which is greater than that predicted by the thermally based tectonic models implied by the Jurassic subsidence history. The excess sedimentation results in the basin region attaining an elevation which exceeds that of the contemporary sea-level, and thereby giving the appearance of a regression. The present day elevation of the region predicted by the model is about 100–200 m above that observed. This discrepancy may arise because the primary tectonic subsidence is better represented by a linear function of time rather than an exponentially decreasing form.     

100 Myr record of sequences, sedimentary facies and sea level change from Ocean Drilling Program onshore coreholes, US Mid-Atlantic coastal plain

We analyzed the latest Early Cretaceous to Miocene sections (～110–7 Ma) in 11 New Jersey and Delaware onshore coreholes (Ocean Drilling Program Legs 150X and 174AX). Fifteen to seventeen Late Cretaceous and 39–40 Cenozoic sequence boundaries were identified on the basis of physical and temporal breaks. Within‐sequence changes follow predictable patterns with thin transgressive and thick regressive highstand systems tracts. The few lowstands encountered provide critical constraints on the range of sea‐level fall. We estimated paleowater depths by integrating lithofacies and biofacies analyses and determined ages using integrated biostratigraphy and strontium isotopic stratigraphy. These datasets were backstripped to provide a sea‐level estimate for the past ～100 Myr. Large river systems affected New Jersey during the Cretaceous and latest Oligocene–Miocene. Facies evolved through eight depositional phases controlled by changes in accommodation, long‐term sea level, and sediment supply: (1) the Barremian–earliest Cenomanian consisted of anastomosing riverine environments associated with warm climates, high sediment supply, and high accommodation; (2) the Cenomanian–early Turonian was dominated by marine sediments with minor deltaic influence associated with long‐term (10⁷ year) sea‐level rise; (3) the late Turonian through Coniacian was dominated by alluvial and delta plain systems associated with long‐term sea‐level fall; (4) the Santonian–Campanian consisted of marine deposition under the influence of a wave‐dominated delta associated with a long‐term sea‐level rise and increased sediment supply; (5) Maastrichtian–Eocene deposition consisted primarily of starved siliciclastic, carbonate ramp shelf environments associated with very high long‐term sea level and low sediment supply; (6) the late Eocene–Oligocene was a starved siliciclastic shelf associated with moderately high sea‐level and low sediment supply; (7) late early–middle Miocene consisted of a prograding shelf under a strong wave‐dominated deltaic influence associated with major increase in sediment supply and accommodation due to local sediment loading; and (8) over the past 10 Myr, low accommodation and eroded coastal systems were associated with low long‐term sea level and low rates of sediment supply due to bypassing.     

Timing of depth‐dependent lithosphere stretching on the S. Lofoten rifted margin offshore mid‐Norway: pre‐breakup or post‐breakup?

Depth‐dependent stretching, in which whole‐crustal and whole‐lithosphere extension is significantly greater than upper‐crustal extension, has been observed at both non‐volcanic and volcanic rifted continental margins. A key question is whether depth‐dependent stretching occurs during pre‐breakup rifting or during sea‐floor spreading initiation and early sea‐floor spreading. Analysis of post‐breakup thermal subsidence and upper‐crustal faulting show that depth‐dependent lithosphere stretching occurs on the outer part of the Norwegian volcanic rifted margin. For the southern Lofoten margin, large breakup lithosphere β stretching factors approaching infinity are required within 100 km of the continent–ocean boundary to restore Lower Eocene sediments and flood basalt surfaces (～54 Ma) to interpreted sub‐aerial depositional environments at sea level as indicated by well data. For the same region, the upper crust shows no significant Palaeocene and Late Cretaceous faulting preceding breakup with upper‐crustal β stretching factors <1.05. Further north on the Lofoten margin, reverse modelling of post‐breakup subsidence with a β stretching factor of infinity predicts palaeo‐bathymetries of ～1500 m to the west of the Utrøst Ridge and fails to restore Lower Eocene sediments and flood basalt tops to sea level at ～54 Ma. If these horizons were deposited in a sub‐aerial depositional environment, as indicated by well data to the south, an additional subsidence event younger than 54 Ma is required compatible with lower‐crustal thinning during sea‐floor spreading initiation. For the northern Vøring margin, breakup lithosphere β stretching factors of ～2.5 are required to restore Lower Eocene sediments and basalts to sea level at deposition, while Palaeocene and Late Cretaceous upper‐crustal β stretching factors for the same region are < 1.1. The absence of significant Palaeocene and late Cretaceous extension on the southern Lofoten and northern Vøring margins prior to continental breakup supports the hypothesis that depth‐dependent stretching of rifted margin lithosphere occurs during sea‐floor spreading initiation or early sea‐floor spreading rather than during pre‐breakup rifting.     

Tectonic evolution of sedimentary basins of northern Somalia

Regional seismic reflection profiles tied to lithological and biostratigraphic data from deep exploration wells have been used to determine the structure and evolution of the poorly known basins of northern Somalia. We recognize six major tectonostratigraphic sequences in the seismic profiles: Middle‐Late Jurassic syn‐rift sequences (Adigrat and Bihen Group), ?Cenomanian‐Campanian syn‐rift sequences (Gumburo Group), Campanian‐Maastrichtian syn‐rift sequences (Jesomma Sandstones), Palaeocene post‐rift sequences (Auradu Limestones), Early‐Middle Eocene post‐rift sequences (Taleh Formation) and Oligocene‐Miocene (Daban Group) syn‐rift sequences. Backstripping of well data provides new constraints on the age of rifting, the amount of crustal and mantle extension, and the development of the northern Somalia rifted basins. The tectonic subsidence and uplift history at the wells can be explained by a uniform extension model with three episodes of rifting punctuated by periods of relative tectonic quiescence and thermal subsidence. The first event initiated in the Late Jurassic (~156 Ma) and lasted for ~10 Myr and had a NW‐SE trend. We interpret the rift as a late stage event associated with the break‐up of Gondwana and the separation of Africa and Madagascar. The second event initiated in the Late Cretaceous (~80 Ma) and lasted for ~20–40 Myr. This event probably correlates with a rapid increase in spreading rate on the ridges separating the African and Indian and African and Antarctica plates and a contemporaneous slowing down of Africa's plate motion. The backstripped tectonic subsidence data can be explained by a multi‐rift extensional model with stretching factor, β, of 1.09–1.14 and 1.05–1.28 for the first and second rifting events, respectively. The model, fails, however, to completely explain the slow subsidence and uplift history of the margin during Early Cretaceous to Late Cretaceous. We attribute this slow subsidence to the combined effect of a sea‐level fall and regional uplift, which caused a major unconformity in northern Somalia. The third and most recent event occurred in the Oligocene (~32 Ma) and lasted for ~10 Myr. This rift developed along the Gulf of Aden and reactivated the Guban, Nogal and Daroor basins, and is related to the opening of the Gulf of Aden. As a result of these events the crust and upper mantle were thinned by up to a factor of two in some basins. In addition, several distinct petroleum systems developed. The principal exploration play is for Mesozoic petroleum systems with the syn‐rift Oligocene‐Miocene as a subordinate objective owing to low maturity and seal problems. The main seals for the different plays are various shales, some of which are also source rocks, but the Early Eocene evaporites of the Taleh formations can also perform a sealing role for Palaeogene or older generated hydrocarbons migrating vertically.     

The Tajik Basin: A composite record of sedimentary basin evolution in response to tectonics in the Pamir

Investigation of a >6-km-thick succession of Cretaceous to Cenozoic sedimentary rocks in the Tajik Basin reveals that this depocentre consists of three stacked basin systems that are interpreted to reflect different mechanisms of subsidence associated with tectonics in the Pamir Mountains: a Lower to mid-Cretaceous succession, an Upper Cretaceous–Lower Eocene succession and an Eocene–Neogene succession. The Lower to mid-Cretaceous succession consists of fluvial deposits that were primarily derived from the Triassic Karakul–Mazar subduction–accretion complex in the northern Pamir. This succession is characterized by a convex-up (accelerating) subsidence curve, thickens towards the Pamir and is interpreted as a retroarc foreland basin system associated with northward subduction of Tethyan oceanic lithosphere. The Upper Cretaceous to early Eocene succession consists of fine-grained, marginal marine and sabkha deposits. The succession is characterized by a concave-up subsidence curve. Regionally extensive limestone beds in the succession are consistent with late stage thermal relaxation and relative sea-level rise following lithospheric extension, potentially in response to Tethyan slab rollback/foundering. The Upper Cretaceous–early Eocene succession is capped by a middle Eocene to early Oligocene (ca. 50–30 Ma) disconformity, which is interpreted to record the passage of a flexural forebulge. The disconformity is represented by a depositional hiatus, which is 10–30 Myr younger than estimates for the initiation of India–Asia collision and overlaps in age with the start of prograde metamorphism recorded in the Pamir gneiss domes. Overlying the disconformity, a >4-km-thick upper Eocene–Neogene succession displays a classic, coarsening upward unroofing sequence characterized by accelerating subsidence, which is interpreted as a retro-foreland basin associated with crustal thickening of the Pamir during India–Asia collision. Thus, the Tajik Basin provides an example of a long-lived composite basin in a retrowedge position that displays a sensitivity to plate margin processes. Subsidence, sediment accumulation and basin-forming mechanisms are influenced by subduction dynamics, including periods of slab-shallowing and retreat.     

Recent and future higher sea levels in New Zealand: A review

Abstract:    Understanding past sea levels is essential to respond to the challenges of climate change. In the Pacific and Tasman, sea level has been up to 1.5 m higher during the mid-Holocene, similar to the predictions of some global warming models. Within New Zealand the knowledge of sea-level movements, especially during the recent past is poor, with the last major investigation being conducted 20 years ago. This paper reviews the state of local understanding of higher sea levels and suggests regions for further study and new methods of analysis to understand the nature of sea-level change in New Zealand.     

Subsidence and exhumation of the Mesozoic Qiangtang Basin: Implications for the growth of the Tibetan plateau

The subsidence and exhumation histories of the Qiangtang Basin and their contributions to the early evolution of the Tibetan plateau are vigorously debated. This paper reconstructs the subsidence history of the Mesozoic Qiangtang Basin with 11 selected composite stratigraphic sections and constrains the first stage of cooling using apatite fission track data. Facies analysis, biostratigraphy, palaeo‐environment interpretation and palaeo‐water depth estimation are integrated to create 11 composite sections through the basin. Backstripped subsidence calculations combined with previous work on sediment provenance and timing of deformation show that the evolution of the Mesozoic Qiangtang Basin can be divided into two stages. From Late Triassic to Early Jurassic times, the North Qiangtang was a retro‐foreland basin. In contrast, the South Qiangtang was a collisional pro‐foreland basin. During Middle Jurassic‐Early Cretaceous times, the North Qiangtang is interpreted as a hinterland basin between the Jinsha orogen and the Central Uplift; the South Qiangtang was controlled by subduction of Meso‐Tethyan Ocean lithosphere and associated dynamic topography combined with loading from the Central Uplift. Detrital apatite fission track ages from Mesozoic sandstones concentrate in late Early to Late Cretaceous (120.9–84.1 Ma) and Paleocene–Eocene (65.4–40.1 Ma). Thermal history modelling results record Early Cretaceous rapid cooling; the termination of subsidence and onset of exhumation of the Mesozoic Qiangtang Basin suggest that the accumulation of crustal thickening in central Tibet probably initiated during Late Jurassic–Early Cretaceous times (150–130 Ma), involving underthrusting of both the Lhasa and Songpan–Ganze terranes beneath the Qiangtang terrane or the collision of Amdo terrane.     

Seismic stratigraphy and paleogeographic evolution of Fairway Basin,Northern Zealandia,Southwest Pacific: from Cretaceous Gondwana breakup to Cenozoic Tonga–Kermadec subduction

We present the first comprehensive seismic‐stratigraphic analysis of Fairway Basin, which is situated on the rifted continent of Zealandia in the Tasman Sea, southwest Pacific, between Australia and New Caledonia. The basin is 700 km long, 150 km wide, and has water depths of 500–3000 m. We describe depositional architecture and paleogeographic evolution of this basin. Basin formation was concurrent with two tectonic events: (i) Cretaceous rifting during eastern Gondwana breakup and (ii) initiation and Cenozoic evolution of Tonga–Kermadec subduction system to the east of the basin. To interpret the basin history we compiled and interpreted 2D seismic‐reflection profiles and make correlations with DSDP boreholes and the geology of New Caledonia. Five seismic‐stratigraphic units were defined. The deepest and oldest unit, FW3, folded and faulted can be correlated with volcaniclastic sediments and magmatic rocks in New Caledonia that are associated with Mesozoic Gondwana margin subduction. Alternatively, given the basin location 200–300 km west of New Caledonia and inboard of the ancient plate boundary, the unit could have formed as Gondwana intra‐continental basin with no known correlative. The overlying unit FW2b records syn‐rift deposition, probably associated with Cretaceous Gondwana breakup. Subaerial erosion supplied terrigenous sediment into the deltas in the northern part of the basin, as suggested by the truncation surfaces on the basement highs and sigmoid reflector geometries within unit FW2b respectively. Above, unit FW2a records post‐rift sedimentation and passive subsidence as the Tasman Sea opened and the Fairway Basin drifted away from Australia. Subsidence led to the flooding of the basement highs and burial of wave‐cut surfaces. Eocene compressive deformation resulted in minor folding and tilting within the Fairway Basin and was associated with the formation of many diapiric structures. The top of unit FW2 is an extensive unconformity that is associated with erosion and truncation on surrounding ridges. Above this unconformity, unit FW1b is interpreted as a turbidite system sourced from topography created during the Eocene tectonic event, which we interpret as being related to Tonga–Kermadec subduction initiation. Pelagic carbonate sedimentation is now prevalent. Unit FW1a has progressively draped the basin during Oligocene to Pleistocene subsidence. Many small volcanic cones were erupted during this final phase of subsidence, either as a delayed consequence of subduction initiation, or related to Tasmantid and Lord Howe hotspot trails. The northern Fairway Ridge remains close to sea level and its reef system continues to supply carbonate detrital sediments into the basin, most likely during sea‐level lowstands. Fairway Basin contains a nearly continuous record of tectonic and paleoclimatic events in the southwest Pacific since Cretaceous time. Its paleogeographic history is a key piece in the puzzle for understanding patterns of regional biodiversity in the southwest Pacific.     

Extension and subsidence of the Pearl River Mouth Basin, northern South China Sea

Abstract The uniform stretching model has been applied to seismic reflection profiles and well-log information from the Pearl River Mouth Basin on the northern flank of the South China Sea. Stretching factors were calculated from subsidence curves determined from the stratigraphy by using the backstripping technique to remove the effects of compaction and sediment loading. Variations in rift topography, palaeobathymetry and global sea-level v/ere taken into account. We argue that the Pearl River Mouth Basin formed by lithospheric extension by a factor of about 1.8, lasting from Late Cretaceous to late Oligocene times. Stretching factors calculated from subsidence agree with those determined from the geometry of normal faulting and from crustal thinning. Thus there is no indication of a significant discrepancy between the different estimates of stretching. The geometry of faulting suggests that considerable amounts of local footwall uplift occurred during the rifting period. Small differences between the observed and calculated subsidence curves (∽ 400 m in the middle Miocene) are best explained by minor amounts of extension ( β ∽ 1.1). The time-temperature history of sediments within the basin has also been calculated so that expected vitrinite reflectance and oil abundance could be determined. The results are consistent with each other and are in reasonable agreement with observations from wells.     

Multiphase cooling and exhumation of the southern Adelaide Fold Belt: constraints from apatite fission track data

Data from apatite fission track analysis are presented for 20 outcrop samples collected in the southern Adelaide Fold Belt, South Australia. Interpretation of these data, with the aid of numerical models which allow inference of multiphase cooling histories, indicate three discrete cooling events that are likely to correlate with sedimentation events in surrounding depositional settings. An event beginning some time after 85 Ma (Late Cretaceous) was characterized by cooling throughout the study area from temperatures of roughly 50 to 70 °C. An event beginning at 300–270 Ma (Late Palaeozoic) was characterized by cooling from temperatures >120 °C in all areas except for the Mount Lofty Ranges and Murray Bridge region, where peak temperatures were only 95–115 °C prior to Palaeozoic cooling. Some samples from these subregions of relatively cool Late Palaeozoic temperatures also retain evidence for even earlier cooling from temperatures >120 °C, beginning prior to 350 Ma. We interpret the post 85-Ma event as the consequence of regional exhumation from a depth of 1.0–1.6 km. The Late Palaeozoic event (300–270 Ma) is interpreted as cooling associated with the termination of the Alice Springs Orogeny, while cooling prior to 350 Ma probably represents the final stages of Early Middle Palaeozoic unroofing of the southern Adelaide Fold Belt.
The results highlight the importance of regional, episodic postorogenic exhumation of Palaeozoic fold belts, where – in some cases – conventional methods have erroneously suggested relatively long-term stability.     

Late Cretaceous basement foundering of the Rosario embayment, Peninsular Ranges forearc basin: backstripping of the El Gallo Formation, Baja California Norte, Mexico

Excellent exposure, well-controlled palaeobathymetry, and tightly-spaced, high-precision radiometric age control in the El Gallo Fm. permit rigorous quantitative analysis. Backstripping of these proximal nonmarine, forearc basin deposits reveals that, during the Late Cretaceous, the Rosario embayment of the Peninsular Ranges forearc was undergoing an episode of rapid tectonic subsidence. This subsidence had several marked effects on the sedimentology of the Rosario embayment: formation of a broad alluvial plain consisting of coarse-grained clastics; rapid (∼ 600 m Myr^-1) aggradation of sediments; and a retrogradational succession of facies, capped by a marine transgression, as deposition failed to keep pace with eustatic rise and subsidence.
Long-term sedimentation is driven by some combination of two allocyclic mechanisms: tectonic subsidence and eustatic sea-level rise. In order to evaluate which force predominated during deposition of the El Gallo Fm., the processes of sedimentation, compaction, and isostasy are evaluated through the interval in question. A sensitivity analysis is performed, in which the maximum tectonic and maximum eustatic contributions are estimated, along with the best-fit model. These results are qualitatively the same: tectonic subsidence was the major driving force of sedimentation in the Rosario embayment in late Campanian time. Regional sedimentological similarities suggest that this tectonic subsidence may have characterized the Peninsular Ranges forearc margin at this time, reflecting an episode of active down-faulting during the Late Cretaceous.     

Clinoform migration patterns of a Late Miocene delta complex in the Danish Central Graben; implications for relative sea-level changes

A Late Miocene delta complex is located in the Danish Central Graben. The delta complex provides the opportunity to study the spatial development of a wave-fluvial dominated delta complex in three dimensions. Based on 3D seismic data (seismic sections and amplitude maps) and well data the complex has been investigated. The delta was developed during an initial rise and then a significant fall (approximately 90 m) in relative sea-level. The prograding clinoformal package of the delta complex has clinoform dips of 2–3° and a thickness of maximum 115 m. The sediments are deposited in five elongated depositional units with the long axis parallel to the delta slope, and progradation occurred in a south-westerly direction. The grain size of the units vary from muddy to coarse-grained sand. Incised canyons running parallel to the depositional direction tend to be straight or have low sinuosity and incise approximately 90 m into the top of the delta. The delta complex has been subdivided into two systems tracts based on a study of clinoform migration patterns: (1) Rising trajectory in Unit 1–4 of the complex, the sea-level was rising as documents a highstand systems tract (HST). (2) Descending trajectory in Unit 5 documenting a forced regression wedge systems tract (FRWST) as the sea-level was falling, creating incised canyons.     

Mesozoic sedimentation rates in the Western Canada Basin as indicators of the time and place of tectonic activity

Abstract The Mesozoic stratigraphy of the westernmost part of the Western Canada Basin is used to estimate sedimentation and relative crustal subsidence rates in the region between 49^oN and 60^oN, immediately to the east of the disturbed belt. Average rates of subsidence varied from zero to 120 m/Myr, with prominent maxima occurring three times during the Mesozoic. The first occurred during the Tithonian, when rates rose to 100 m/Myr; the second during the Albian to early Santonian, when rates rose to 120 m/Myr in the north and to 70 m/Myr in the south, with subsidence occurring earlier in the north than in the south. The third period of rapid subsidence occurred during the Campanian and Maastrichtian, with rates rising to 120 m/Myr in the southern part of the basin. During non-peak periods, average rates of subsidence ranged from 3.5 m/Myr to 35 m/Myr in the Triassic, from zero to 20 m/Myr in the Jurassic and from zero to 30 m/Myr in the Cretaceous.
Tectonic loading of the lithosphere is considered to be the most probable cause for all three of these periods of rapid subsidence. The three separate episodes are correlated with the separate arrivals of accreted terranes; the first in north-east Oregon and central west Idaho during the Late Jurassic, the second in the central Yukon during the late Early Cretaceous and the third in south-east British Columbia during the Late Cretaceous.     

珠江三角洲晚第四纪地层、海平面变化 与构造运动的关系

在回顾南海北部海岸和陆架地层证据的基础上,梳理了珠江三角洲晚第四纪演变历史。结果显示：1）本区晚第四纪地层拥有2套海相沉积,上（新）海相层是当前间冰期（或10.5 ka B.P.以来）高海平面期间形成的沉积物,而下（老）海相层最可能是末次间冰期（126―120 ka B.P.）高海平面阶段留下的沉积物;2）老海相层顶面埋深在三角洲盆地内至少比现今海平面低10~15 m,在珠江口一带则低于20 m,这说明珠江三角洲盆地存在构造沉降,因为2次间冰期的海平面高度是相近的;3）在新生代欧亚板块大陆向东南伸展的构造格局下,南海北部陆架和海岸带经历长期连续的沉降,而长期平均沉降率在0.12 mm/a左右,明显低于GPS测出的现代沉降率;4）在这种板块运动基础上,晚第四纪断裂活动增强了三角洲盆地的沉降,为2次海侵提供了可容沉积空间。     

Indian Ocean tsunamis: environmental and socio-economic impacts in Langkawi, Malaysia

We report the results of a study of the physical characteristics and socio-economic impacts of the Indian Ocean Tsunami of 26 December 2004 on the tourist island of Langkawi, Malaysia. In comparison with many other locations struck by the tsunami, the immediate physical and socio-economic impacts in Langkawi were relatively minor. A detailed survey of the watermark and ground elevations was undertaken in the worst affected area between Sungei Kuala Teriang and Sungei Kuala Melaka. Here, the tsunami reached a maximum elevation of 4.29 m as it crossed the coast, with a maximum flow depth of 2.0 m and a very consistent run-up elevation relative to mean sea level of 300 ± 10 cm. The tsunami inundated inshore areas for 300 m and penetrated inland along creeks for 500–1000 m. Structural damage to buildings was confined to within 50–150 m of the shoreline where about 10% of the houses were completely destroyed and 60–70% suffered significant structural damage. Damage was particularly severe in areas where there was no engineered coastal protection, but while coastal revetments did provide enhanced protection for houses at the waterfront, the coastline in the study area appeared to be more heavily impacted than elsewhere in Langkawi because wave energy was focused on the area by offshore breakwaters built to protect the Langkawi port and airport. Emergency response after the tsunami was rapid and efficient but would have been improved if the local police station had not been rendered inoperative by the first wave, and if a mechanism had been in place to ensure that informal advance warnings transmitted between Phuket (Thailand), Langkawi and Penang (Malaysia) by tourist operators could have been more widely disseminated.     

Sediment provenance and routing evolution in the Late Cretaceous–Eocene Ager Basin,south-central Pyrenees,Spain

This study constrains the sediment provenance for the Late Cretaceous–Eocene strata of the Ager Basin, Spain, and reconstructs the interplay between foreland basin subsidence and sediment routing within the south-central Pyrenean foreland basin during the early phases of crustal shortening using detrital zircon (DZ) U-Pb-He double dating. Here we present and interpret 837 new DZ U-Pb ages, 113 of which are new DZ (U-Th)/He double-dated zircons. U-Pb-He double dating results allow for a clear differentiation between different foreland and hinterland sources of Variscan zircons (280–350 Ma) by leveraging the contrasting thermal histories of the Ebro Massif and Pyrenean orogen, recorded by the zircon (U-Th)/He (ZHe) ages, despite their indistinguishable U-Pb age signatures. Cretaceous–Paleocene sedimentary rocks, dominated by Variscan DZ U-Pb age components with Permian–Triassic (200–300 Ma) ZHe cooling ages, were sourced from the Ebro Massif south of the Ager Basin. A provenance shift occurred at the base of the Early Eocene Baronia Formation (ca. 53 Ma) to an eastern Pyrenean source (north-east of the Ager Basin) as evidenced by an abrupt change in paleocurrents, a change in DZ U-Pb signatures to age distributions dominated by Cambro-Silurian (420–520 Ma), Cadomian (520–700 Ma), and Proterozoic–Archean (>700 Ma) age components, and the prominent emergence of Cretaceous–Paleogene (<90 Ma) ZHe cooling ages. The Eocene Corçà Formation (ca. 50 Ma), characterized by the arrival of fully reset ZHe ages with very short lag times, signals the accumulation of sediment derived from the rapidly exhuming Pyrenean thrust sheets. While ZHe ages from the Corçà Formation are fully reset, zircon fission track (ZFT) ages preserve older inherited cooling ages, bracketing the exhumation level within the thrust sheets to ca. 6–8 km in the Early Eocene. These DZ ZHe ages yield exhumation rate estimates of ca. 0.03 km/Myr during the Late Cretaceous–Paleocene for the Ebro Massif and ca. 0.2–0.4 km/Myr during the Eocene for the eastern Pyrenees.     

Tectonic and climatic controls on the sequential arrangement of an alluvial fan/fan‐delta complex (Montserrat,Eocene, Ebro Basin,NE Spain)

A magnetostratigraphy‐based chronological framework has been constructed in the Eocene sediments of the Montserrat alluvial fan/fan‐delta complex (southeast Ebro Basin), in order to unravel forcing controls on their sequential arrangement and to revise the tectonosedimentary history of the region. The palaeomagnetic study is based on 403 sites distributed along an 1880‐m‐thick composite section, and provides improved temporal constraints based on an independent correlation to the geomagnetic polarity time scale. The new chronological framework together with sequence stratigraphy and geohistory analysis allow us to investigate the interplay between factors controlling the sequential arrangement of the Montserrat complex at the different temporal scales and to test for orbitally driven climate forcing. The results suggest that the internal stacking pattern in transgressive and regressive sequences sets within the more than 1000‐m‐thick Milany Composite Megasequence can be explained as the result of subsidence‐driven accommodation changes under a general increase of sediment supply. Composite sequences (tens to hundreds of metres thick) likely reflect orbitally forced cyclicity related to the 400‐kyr eccentricity cycle, possibly controlled by climatically induced sea‐level fluctuations. This study also provides new insights on the deformational history of the area, and shows a correlation between (tectonic) subsidence and forelimb rotation measured on basin‐margin deformed strata. Integration of subsidence curves from different sectors of the eastern Ebro Basin allows us to estimate the variable contribution of tectonic loads from the two active basin margins: the Catalan Coastal Ranges and the Pyrenees. The results support the presence of a double flexure from Late Lutetian to Late Bartonian, associated with the two tectonically active margins. From Late Bartonian to Early Priabonian the homogenization of subsidence values is interpreted as the result of the coupling of the two sources of tectonic load.     

The structural and sedimentological evolution of early synrift successions: the Middle Jurassic Tarbert Formation, North Sea

ABSTRACT This study addresses the complex relationship between an evolving fault population and patterns of synrift sedimentation during the earliest stages of extension. We have used 3D seismic and well data to examine the early synrift Tarbert Formation from the Middle–Late Jurassic northern North Sea rift basin. The Tarbert Formation is of variable thickness across the study area, and thickness variations define a number of 1- to 5-km-wide depocentres bounded by normal faults. Seismic reflections diverge towards the bounding faults indicating that the faults were active contemporaneous with the deposition of the formation. Many of these faults became inactive during later Heather Formation times. The preservation of the Tarbert Formation in both footwall and hangingwall locations demonstrates that, during the earliest synrift, the rate of deposition balanced the rate of tectonic subsidence. Local space generated by hangingwall subsidence was superimposed upon accommodation generated due to a regional rise in relative sea-level. In basal Tarbert Formation times, transgression across the prerift coastal plain produced lagoons and bays, which became increasingly marine. During continued transgression, barrier islands moved landward across the drowned bays. In the southern part of our study area, shallow marine sediments are erosionally truncated by fluvial deposition. These fluvial systems were constrained by fault growth monoclines, and flowed parallel to the main faults. We illustrate that stratal architecture and facies distribution of early sedimentation is strongly influenced by the active short-lived faults. Local depocentres adjacent to fault displacement maxima focused channel stacking and allowed the aggradation of thick shoreface successions. These depocentres formed early in the rift phase are not necessarily related to Late Jurassic – Early Cretaceous depocentres developed along the major linked normal fault systems.     

Location,extent, and magnitude of dynamic topography in the Late Cretaceous Cordilleran Foreland Basin,USA: New insights from 3D flexural backstripping

Mantle-induced dynamic topography (i.e., subsidence and uplift) has been increasingly recognized as an important process in foreland basin development. However, characterizing and distinguishing the effects (i.e., location, extent and magnitude) of dynamic topography in ancient foreland basins remains challenging because the spatio-temporal footprint of dynamic topography and flexural topography (i.e., generated by topographic loading) can overlap. This study employs 3D flexural backstripping of Upper Cretaceous strata in the central part of the North American Cordilleran foreland basin (CFB) to better quantify the effects of dynamic topography. The extensive stratigraphic database and good age control of the CFB permit the regional application of 3D flexural backstripping in this basin for the first time. Dynamic topography started to influence the development of the CFB during the late Turonian to middle Campanian (90.2–80.2 Ma) and became the dominant subsidence mechanism during the middle to late Campanian (80.2–74.6 Ma). The area influenced by >100 m dynamic subsidence is approximately 400 by 500 km, within which significant (>200 m) dynamic subsidence occurs in an irregular-shaped (i.e., lunate) subregion. The maximum magnitude of dynamic subsidence is 300 ± 100 m based on the 80.2–74.6 Ma tectonic subsidence maps. With the maximum magnitude of dynamic uplift being constrained to be 200–300 m, the gross amount of dynamic topography in the Late Cretaceous CFB is 500–600 m. Although the location of dynamic subsidence revealed by tectonic subsidence maps is generally consistent with isopach map trends, tectonic subsidence maps developed through 3D flexural backstripping provide more accurate constraints of the areal extent, magnitude and rate of dynamic topography (as well as flexural topography) in the CFB through the Late Cretaceous. This improved understanding of dynamic topography in the CFB is critical for refining current geodynamic models of foreland basins and understanding the surface expression of mantle processes.