绳索取心钻杆螺纹的加工方法

近年来，金刚石绳索取心钻进方法得到了迅速的发展，但由于绳索取心钻杆螺纹损坏后的再加工（简称二次加工）问题未能及时跟上，给绳索取心钻进工艺的推广应用带来了困难。     

绳索取心钻杆外螺纹位置公差的检测

螺纹粘结式绳索取心钻杆,在管体两端都加工圆锥外螺纹,再用粘结剂粘结钻杆公接头和母接头,钻杆管材是正火状态,所以它的机械强度比经调质处理     

绳索取心钻杆内壁结垢原因分析与对策

绳索取心钻杆内壁结垢,是指泥浆中的固相物质(粘土颗粒、岩粉、未溶解的处理剂等)以及其它固体微粒在钻杆内壁上的沉积物。当钻杆结垢超过一定厚度时,直接影响打捞器下放和内管提升工作。不仅降低钻进效率,同时增加上、下钻具辅助时间,大大加重工人的体力劳动。当前钻杆结垢是绳索取心难解决问题之一,因此笔者就钻杆结垢原因及防垢、消垢措施谈谈自己的看法和意见。     

绳索取心钻杆超声波探伤方法分析研究

对绳索取心钻杆断裂的原因进行了分析,对超声波探伤绳索取心钻杆方法进行了研究,对具体探测方法、探测仪器和探伤过程进行了分析。对有效预判绳索取心钻杆断裂、降低孔内事故发生率和减少经济损失具有一定的现实意义。     

基于ANSYS绳索取心钻杆和连接接头的应力分析

对绳索取心钻探施工的工况进行了分析,利用ANSYS软件对绳索取心钻杆以及连接接头的应力状态进行了三维模拟,提出了不同工况条件下,钻杆柱最大应力出现的位置。所得的结论对预防钻杆折断事故、优化接头螺纹设计、确定合理钻进参数有一定的参考意义。     

深孔绳索取心钻杆质量控制措施

在优化深孔绳索取心钻杆结构设计、选用优质钢材基础上,制定合理的加工工艺和检测规程,配齐相应的检测器具。通过严格的工艺控制,确保钻杆质量稳定,满足深孔绳索取心钻进需要。     

高强度绳索取心钻杆接头

本文介绍了高强度绳索取心钻杆接头(简称高强接头)生产试验和扩大试用效果,分析了高强接头比普遍接头综合机械性能好的原因.重点论述了两种接头失效型式、磨损与偏磨和高强接头扩大试用阶段出现的新问题,提出进一步提高高强接头质量的意见,并探讨与总结了接头连接及应用技术问题.     

地质特深孔绳索取心钻杆机械性能研究

地质特深孔绳索取心钻杆结构区别于API石油钻杆,其机械性能计算不可直接引用API石油钻杆的相关理论公式。针对这一理论依据与计算方法缺失,本文对地质特深孔双台肩钻杆接头进行了受力分析,开展了钻杆接头拉伸载荷与扭转载荷计算理论研究,构建了绳索取心钻杆机械性能计算的理论方法。同时,通过有限元分析和台架试验,确定了H-5000规格双台肩绳索取心钻杆的机械性能,验证了计算方法的准确性,并提出了钻杆结构改进建议与下一步研究方向,为高性能薄壁绳索取心钻杆“服役”于5000 m地质岩心钻探工程提供了技术支撑。     

深孔绳索取心钻杆抗拉脱能力有限元分析

针对深孔施工过程中钻杆接头螺纹拉脱、杆体拉断等问题,以非线性有限元理论为基础,运用大型通用有限元软件对不同扣型不同参数下绳索取心钻杆螺纹副在拉伸及拉扭条件下的抗拉脱能力进行了分析计算。研究结果表明,螺纹副锥度相同时,负角度梯形扣的抗拉脱能力最强,不对称梯形扣的抗拉脱能力次之;同一扣型条件下,锥角变小时,螺纹副拉脱力呈现出先降后升的变化趋势;对于负角度梯形扣,随着负角度的不断增大,其抗拉脱能力有所增加;相对于拉伸,拉扭条件下螺纹副受力较为复杂,其抗拉脱能力略有降低。     

特深孔地质岩心钻探钻孔口径及管柱规格研究

针对5000 m地质岩心钻探基础准则与依据缺失,油气钻井与岩心钻探工艺及装备差异大等问题,本文梳理分析了国内外深部地质岩心钻探口径系列及管柱规格,厘定了基本外界条件及相互关联要求,开展了特深孔岩心钻探环空水力学计算与绳索取心钻杆的等强度设计,初步构建了以绳索取心钻进工艺为主体的5000 m特深孔钻探口径系列与钻（套）管柱规格。     

Influencing factors for catalytic oxidation of mine gas to methanol in liquid phase

The influencing factors for liquid phase catalytic oxidation of mine gas to methanol （in form of CHaCOOCH3） are studied using the self-established experimental apparatus. The results show that CH3COOCH3 （target product） is obtained by using CH3COOH as reaction solvent, and the yield of target product increases with the increasing of reaction temperature, gas pressure and reaction time. In the mine gas-Pd（OAc）2-CHaCOOH system, the yield of CHaCOOCH3 increases with the increasing of addition of Pd（OAc）2 which is redox catalyst for mine gas conversion. The yield of CH3COOCH3 will be greatly improved by composite additional oxidant which is obtained by equimolar mix of p-benzoquinone with NO2.     

HyLogger-3, a visible to shortwave and thermal infrared reflectance spectrometer system for drill core logging: functional description

Australian Geological Surveys are the custodians of a major national asset in the form of historically drilled and archived drill cores of the top few kilometres of the continent acquired by government agencies and companies over many decades. The AuScope National Virtual Core Library (NVCL) component of the AuScope Earth Model comprises geological/rock samples, technology, people and database/delivery infrastructure located in six nationally distributed nodes and is aimed at extracting additional value from this asset. The technology components of the NVCL comprise an integrated suite of hardware (HyLogger-3) and software (TSG-Core) systems for the imaging and hyperspectral characterisation of drill cores in their original core trays and the interpretation of their contained oxide, carbonate, hydrous and anhydrous silicate mineralogy. The HyLogger-3 includes state-of-the-art Fourier Transform Spectrometers that continuously measure calibrated spectral reflectance from nominal 10 by 18 mm fields of view. These spectra are in turn passed through a series of automatic and semi-automatic pre-processing and mineralogical unmixing algorithms. These, along with numerous other tools in TSG-Core, output a variety of mineralogical and image products for use by scientists in many branches of the earth sciences. This paper provides a functional overview of the HyLogging hardware and software tools available in each of Australia's Geological Surveys.