非饱和土中热−湿−盐耦合作用的稳态分析

以多孔介质理论为基础,研究了稳态条件下非饱和土中温度?水分?盐分多场耦合问题。考虑非饱和土的孔隙被液态水、溶解的盐分、水蒸气和干燥气体等填充,在质量和能量守恒的基础上获得了非饱和土中水分、气体、盐分的质量守恒方程以及能量守恒方程。考虑一维稳态问题,选取温度、孔隙气压、孔隙水压和盐溶液浓度以及它们的导数作为状态变量,得到了问题的状态方程组。在给定的边界条件下,采用打靶法求解了该强耦合的非线性变系数微分方程组,通过与已有的试验结果相比较,验证了模型的有效性。基于数值算例,参数分析了含水率、温度边界、孔隙率等条件对非饱和土中温度场、水分场和盐分场分布的影响规律。     

可压缩流体饱和孔隙介质中孔隙压力波传播数值分析

首次将高精度时空守恒元/解元方法推广到可压缩流体饱和孔隙介质中孔隙压力波传播的数值计算中。将孔隙度梯度从源（汇）项中分离,直接引入流通量,改进了理论模型。通过对孔隙介质激波问题的数值模拟,验证了方法的精度和有效性。在此基础上,提出了孔隙介质中二维黎曼问题,并揭示了孔隙压力波存在接触间断、激波、膨胀波、压缩波等复杂的结构特征。该成果对二氧化碳地质封存、二氧化碳提高石油采收率、页岩气压裂开采以及地震破裂过程的研究具有重要的理论与应用意义。     

Hydro‐mechanical modeling of cohesive crack propagation in multiphase porous media using the extended finite element method

In this paper, a numerical model is developed for the fully coupled hydro‐mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non‐wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two‐phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid skeleton is accounted. The cohesive crack model is integrated into the numerical modeling by means of which the nonlinear fracture processes occurring along the fracture process zone are simulated. The solid phase displacement, the wetting phase pressure and the capillary pressure are taken as the primary variables of the three‐phase formulation. The other variables are incorporated into the model via the experimentally determined functions, which specify the relationship between the hydraulic properties of the fracturing porous medium, that is saturation, permeability and capillary pressure. The spatial discretization is implemented by employing the extended finite element method, and the time domain discretization is performed using the generalized Newmark scheme to derive the final system of fully coupled nonlinear equations of the hydro‐mechanical problem. It is illustrated that by allowing for the interaction between various processes, that is the solid skeleton deformation, the wetting and the non‐wetting pore fluid flow and the cohesive crack propagation, the effect of the presence of the geomechanical discontinuity can be completely captured. Copyright © 2012 John Wiley & Sons, Ltd.     

An upscaling method and a numerical analysis of swelling/shrinking processes in a compacted bentonite/sand mixture

This paper presents an upscaling concept of swelling/shrinking processes of a compacted bentonite/sand mixture, which also applies to swelling of porous media in general. A constitutive approach for highly compacted bentonite/sand mixture is developed accordingly. The concept is based on the diffuse double layer theory and connects microstructural properties of the bentonite as well as chemical properties of the pore fluid with swelling potential. Main factors influencing the swelling potential of bentonite, i.e. variation of water content, dry density, chemical composition of pore fluid, as well as the microstructures and the amount of swelling minerals are taken into account. According to the proposed model, porosity is divided into interparticle and interlayer porosity. Swelling is the potential of interlayer porosity increase, which reveals itself as volume change in the case of free expansion, or turns to be swelling pressure in the case of constrained swelling. The constitutive equations for swelling/shrinking are implemented in the software GeoSys/RockFlow as a new chemo‐hydro‐mechanical model, which is able to simulate isothermal multiphase flow in bentonite. Details of the mathematical and numerical multiphase flow formulations, as well as the code implementation are described. The proposed model is verified using experimental data of tests on a highly compacted bentonite/sand mixture. Comparison of the 1D modelling results with the experimental data evidences the capability of the proposed model to satisfactorily predict free swelling of the material under investigation. Copyright © 2004 John Wiley & Sons, Ltd.     

Modelling the Mont Terri HE-D experiment for the Thermal–Hydraulic–Mechanical response of a bedded argillaceous formation to heating

Coupled thermal–hydrological–mechanical (THM) processes in the near field of deep geological repositories can influence several safety features of the engineered and geological barriers. Among those features are: the possibility of damage in the host rock, the time for re-saturation of the bentonite, and the perturbations in the hydraulic regime in both the rock and engineered seals. Within the international cooperative code-validation project DECOVALEX-2015, eight research teams developed models to simulate an in situ heater experiment, called HE-D, in Opalinus Clay at the Mont Terri Underground Research Laboratory in Switzerland. The models were developed from the theory of poroelasticity in order to simulate the coupled THM processes that prevailed during the experiment and thereby to characterize the in situ THM properties of Opalinus Clay. The modelling results for the evolution of temperature, pore water pressure, and deformation at different points are consistent among the research teams and compare favourably with the experimental data in terms of trends and absolute values. The models were able to reproduce the main physical processes of the experiment. In particular, most teams simulated temperature and thermally induced pore water pressure well, including spatial variations caused by inherent anisotropy due to bedding.     

Study on coupled thermo-hydro-mechanical processes in column bentonite test

An unconventional numerical scheme is developed to simulate coupled thermo-hydro-mechanical (THM) processes in partially saturated medium. The non-isothermal, unsaturated fluid flow and mechanical processes are sequentially coupled by updating all the state variables using cellular automaton technique and finite difference method on spatial and temporal scale, respectively. A new cellular automaton updating scheme is proposed by introducing a fast successive relaxation index, which greatly improves the computational efficiency in the simulation of THM coupling process. This is implemented in a self-developed numerical system, i.e., an elasto-plastic cellular automaton (EPCA^3D), which was used to numerically reproduce the coupled THM behavior of bentonite pellets in a column experiment that was heated up to 140 °C firstly and then was hydrated simulating the resaturation of the backfilling. By using the cellular automaton technique in EPCA^3D, the challenging courses of the changing boundary conditions over time and space during the experiment are conveniently implemented. The EPCA^3D was able to reproduce the main physical processes of the in laboratory column bentonite experiment within the heating and hydration phase. The modeling results for the evolution of temperature, relative humidity, water uptake and axial pressure are consistent with the experimental data in terms of trends and magnitudes, which verifies the realistic simulation with the developed model and contributes to a deeper understanding of the observed phenomena.     

Non-isothermal flow in low permeable porous media: a comparison of Richards’ and two-phase flow approaches

The present work compares the performance of two alternative flow models for the simulation of thermal-hydraulic coupled processes in low permeable porous media: non-isothermal Richards’ and two-phase flow concepts. Both models take vaporization processes into account: however, the Richards’ model neglects dynamic pressure variations and bulk flow of the gaseous phase. For the comparison of the two approaches first published, data from a laboratory experiment are studied involving thermally driven moisture flow in a partially saturated bentonite sample. Then a benchmark test of longer-term thermal-hydraulic behavior in the engineered barrier system of a geological nuclear waste repository is analyzed (DECOVALEX project). It was found that both models can be used to reproduce the vaporization process if the intrinsic permeability is relative high. However, when a thermal-hydraulic coupled problem has the same low intrinsic permeability, only the two-phase flow approach provides reasonable results.     

Numerical modeling of multiphase fluid flow in deforming porous media: A comparison between two- and three-phase models for seismic analysis of earth and rockfill dams

In this paper, a fully coupled numerical model is presented for the finite element analysis of the deforming porous medium interacting with the flow of two immiscible compressible wetting and non-wetting pore fluids. The governing equations involving coupled fluid flow and deformation processes in unsaturated soils are derived within the framework of the generalized Biot theory. The displacements of the solid phase, the pressure of the wetting phase and the capillary pressure are taken as the primary unknowns of the present formulation. The other variables are incorporated into the model using the experimentally determined functions that define the relationship between the hydraulic properties of the porous medium, i.e. saturation, relative permeability and capillary pressure. It is worth mentioning that the imposition of various boundary conditions is feasible notwithstanding the choice of the primary variables. The modified Pastor–Zienkiewicz generalized constitutive model is introduced into the mathematical formulation to simulate the mechanical behavior of the unsaturated soil. The accuracy of the proposed mathematical model for analyzing coupled fluid flows in porous media is verified by the resolution of several numerical examples for which previous solutions are known. Finally, the performance of the computational algorithm in modeling of large-scale porous media problems including the large elasto-plastic deformations is demonstrated through the fully coupled analysis of the failure of two earth and rockfill dams. Furthermore, the three-phase model is compared to its simplified one which simulates the unsaturated porous medium as a two-phase one with static air phase. The paper illustrates the shortcomings of the commonly used simplified approach in the context of seismic analysis of two earth and rockfill dams. It is shown that accounting the pore air as an independent phase significantly influences the unsaturated soil behavior.     

裂隙岩体流固耦合双重介质模型的有限元计算

基于孔隙-裂隙岩体的双重孔隙介质流固耦合计算的微分方程,利用伽辽金有限元法提出的相应有限元公式,并基于岩体分类指标（RQD,RMR）提出了与岩体应力状态相关的渗透系数计算公式。编制了相应的有限元程序并给出了应用算例,将计算结果与相关文献作了比较,得出相关结论。     

孔隙气压对核废物地质处置热-流-固耦合影响的有限元分析

为考察孔隙气体压力对高放废物地质处置中的热-流-固耦合过程的影响,借用Leiws等建立的可变形孔隙介质中非等温空气流和水流模型,在其水连续性方程中加入了温度梯度引起的水分扩散项,研制出相应的热-水-气-应力耦合弹塑性二维有限元程序。针对一个假定的高放废物地质处置库模型,在相同的初始温度、孔隙水压力和岩体应力条件下,取3种缓冲层中的初始孔隙气体压力,通过数值模拟考察了处置库近场的主应力、饱和度、气和水的流速、温度和孔隙压力的分布与变化。结果显示,当缓冲层中的初始孔隙气压力较高时,其对围岩中应力影响较大。     

Modeling of Coupled Thermo-Hydro-Mechanical Processes with Links to Geochemistry Associated with Bentonite-Backfilled Repository Tunnels in Clay Formations

This paper presents simulation results related to coupled thermal–hydraulic–mechanical (THM) processes in engineered barrier systems (EBS) and clay host rock, in one case considering a possible link to geochemistry. This study is part of the US DOE Office of Nuclear Energy’s used fuel disposition campaign, to investigate current modeling capabilities and to identify issues and knowledge gaps associated with coupled THMC processes and EBS–rock interactions associated with repositories hosted in clay rock. In this study, we simulated a generic repository case assuming an EBS design with waste emplacement in horizontal tunnels that are back-filled with bentonite-based swelling clay as a protective buffer and heat load, derived for one type of US reactor spent fuel. We adopted the Barcelona basic model (BBM) for modeling of the geomechanical behavior of the bentonite, using properties corresponding to the FEBEX bentonite, and we used clay host rock properties derived from the Opalinus clay at Mont Terri, Switzerland. We present results related to EBS host–rock interactions and geomechanical performance in general, as well as studies related to peak temperature, buffer resaturation and thermally induced pressurization of host rock pore water, and swelling pressure change owing to variation of chemical composition in the EBS. Our initial THM modeling results show strong THM-driven interactions between the bentonite buffer and the low-permeability host rock. The resaturation of the buffer is delayed as a result of the low rock permeability, and the fluid pressure in the host rock is strongly coupled with the temperature changes, which under certain circumstances could result in a significant increase in pore pressure. Moreover, using the BBM, the bentonite buffer was found to have a rather complex geomechanical behavior that eventually leads to a slightly nonuniform density distribution. Nevertheless, the simulation shows that the swelling of the buffer is functioning to provide an adequate increase in confining stress on the tunnel wall, leading to a stabilization of any failure that may occur during the tunnel excavation. Finally, we describe the application of a possible approach for linking THM processes with chemistry, focusing on the evolution of primary and secondary swelling, in which the secondary swelling is caused by changes in ionic concentration, which in turn is evaluated using a transport simulation model.     

含天然气水合物沉积物分解过程的有限元模拟

温度和压力的变化会引起含天然气水合物沉积物的分解,其过程伴随着相态转换、孔隙水压力和气压力耗散、热传导、骨架变形等过程的相互耦合作用。基于多孔介质理论建立了描述含天然气水合物沉积物分解过程的数学模型,考虑了水合物分解产生的水、气流动、水合物相变和分解动力学过程、热传导、骨架变形等过程的耦合作用。基于有限元法,建立了模拟水合物分解过程的数值模型,并编制了计算机分析程序。通过对降压法和升温法开采过程的数值模拟,揭示了在水合物分解过程中沉积物储层的变形、压力、温度等因素的变化规律。结果表明：降压法和升温法都会导致储层变形以及产生超孔隙压力,但两种方法作用效果不同;同时,水合物分解过程包含渗流及热传导作用。     

基于热-流-固耦合模型的石油钻井施工过程数值分析

岩土介质多场耦合问题需考虑诸多因素,温度、渗流及应力之间的耦合关系复杂,试验条件不易控制,且难以实现,因此,辅以数值模拟手段具有重要的意义。基于混合物理论,推导出岩土介质温度、渗流和应力耦合的数学模型及其控制方程,提出该数学模型的求解方法,以MATLAB语言为平台,将Abaqus程序作为一个模块嵌入迭代算法程序中,编制了多场耦合分析程序,并给出了2个典型算例验证该方法的有效性和实用性。然后,将建立的多场耦合模型和计算程序应用于石油钻井施工过程的模拟,重点分析井壁围岩内温度场、渗流场和应力场的变化规律,以及钻井液温度的变化对井壁稳定性的影响。研究成果对我国地下石油、核废料储存等工程设计和施工具有一定的指导意义。     

Fluctuation responses of saturated porous media subjected to cyclic thermal loading

Normalized, coupled governing equations for one-dimensional thermal consolidation problems are established. The non-dimensional coefficients of thermal consolidation and thermal diffusivity are defined accordingly. An analytical solution is deduced by using the Laplace transform and the Gauss–Legendre method of Laplace transform inversion. The responses of saturated porous media subjected to cyclic thermal loading are studied. The evolution of temperature, pore pressure and displacement from instantaneous state to quasi-steady state, with elapsed time, are analysed. The characteristics of cyclic fluctuation and the attenuation of the field variables with increased depth are also analysed. The influences of the permeability of media on thermal responses are discussed.     

不连续面在双重介质热-水-力三维耦合分析中的有限元数值实现

在建立双重介质热-水-力耦合微分控制方程的基础上,提出了裂隙岩体热-水-力耦合的三维力学模型,对不同介质分别建立以节点位移、水压力和温度为求解量的三维有限元格式,开发了双重介质热-水-力耦合分析的的三维有限元计算程序,在有限元数值分析中不连续面应力计算采用等厚度空间8节点节理单元进行离散,而不连续面渗流和热能计算时采用平面4节点等参单元进行离散,这样保证了不同介质之间的水量、热量交换和两类模型接触处节点水头、温度和位移相等。通过高温岩体地热开发算例,揭示了在热-水-力耦合作用下不连续面处于低应力区,其张开度随运行时间的延长呈非线性增加,非稳定渗流阶段不连续面显著地控制着渗流场的整体分布,它的水头远高于拟连续岩体介质的水头,而进入稳定渗流阶段不连续面的控渗作用不明显,由于高温岩体地热开发系统中存在大规模的热量补给,不连续面对岩体温度场分布的影响并不显著。     

三相耦合渗流侵蚀管涌机制研究及有限元模拟

管涌的发生、发展过程是土骨架相在渗流作用下侵蚀为可动细颗粒相,并随水相在孔隙通道中运移流失的过程。在该过程中,渗流与侵蚀相互耦合,相互促进,水相、土相、可动细颗粒相互作用,因此,管涌过程是一个多场、多相耦合的高度非线性的动态过程。现有的管涌试验结果表明,只有当水力梯度大于起始水力梯度时,细颗粒相才会随水相从土体中运移流失,土体才会发生管涌侵蚀,且管涌稳定后土体的孔隙率（稳定孔隙率）和水力梯度之间存在对应关系,根据该结果,提出管涌稳定孔隙率的概念,修正传统的渗流侵蚀本构方程,建立多孔介质中三相耦合的修正的渗流侵蚀管涌控制方程。最后,针对特定应力状态下的土体建立稳定孔隙率和水力梯度之间的对应关系。基于Galerkin有限元法编制有限元程序,在轴对称情况下对该土体的管涌过程进行数值模拟。结果表明,修正后的管涌控制方程能更全面地描述管涌发生、发展直至稳定状态的特性。     

多尺度多孔介质有效气体输运参数的分形特征

非常规油气资源的孔隙结构及其连通性非常复杂,其孔隙尺度从毫米到纳米跨越多个量级.多孔介质中气体的输运过程不仅依赖于介质的多尺度微观结构特征,还依赖于气体的相关属性.气体在多尺度多孔介质中的输运过程包括无滑流、滑脱流和过渡流,涉及分子扩散和努森扩散等多种机制,因此很难用唯一的连续介质理论来描述气体的输运特征.大量的数据表明真实多孔介质中的内部孔隙具有分形标度特征,因此采用分形几何表征多尺度多孔介质的孔隙结构,引入孔隙分形维数和迂曲度分形维数定量表征多孔介质的微结构和弯曲流道,建立多尺度多孔介质气体输运过程的细观模型;推导了多尺度多孔介质中气体的有效渗透率和有效扩散系数,并讨论了多尺度多孔介质微结构参数和气体属性对于气体等效输运特性的定量影响.该研究不仅可以丰富渗流理论,且有利于深入理解非常规油气藏的产出机制.      

Visualizing complex pore structure and fluid flow in porous media using 3D printing technology and LBM simulation

Pore structures of porous media and properties of fluid flow are key factors for the study of non-Darcy groundwater flow. However, it is difficult to directly observe pore structures and flow properties, resulting in a “black box” problem of porous media. This problem has hindered the in-depth study of the groundwater flow mechanism at the pore scale. In recent years, 3D rapid prototyping technology has seen tremendous development. 3D printing provides digital models and printing models of porous media with clear internal structure. Thus, Lattice Boltzmann Method can be used to simulate the flow processes at the pore scale based on real pore structures. In this study, 3D printing cores and Lattice Boltzmann Method were coupled to conduct both laboratory and numerical experiments in spherical porous media with different sphere diameters and periodic arrays. The LBM simulation results show a good agreement with laboratory experimental results. With the advantages of LBM and 3D printing, this approach provides a visualization of the complex pore structure and fluid flow in pores, which is a promising method for studies of non-Darcy groundwater flow at the pore scale.     

核废料处置概念库开挖及封闭后近场热-水-应力耦合数值分析

考虑了缓冲层中温度梯度水分扩散、水蒸汽扩散对水连续性及能量守恒的影响,进一步完善了饱和-非饱和介质中热-水-应力耦合现象的控制方程。应用缓冲材料的实验资料,对核废料处置概念库开挖及封闭后近场的热-水-应力耦合过程进行了数值模拟,以考察围岩中的位移、塑性区、主应力、孔隙水压力和温度的分布及变化。认为开挖是引起洞室围岩中的变形及应力重新分布的主要原因,但坑道封闭后的热-水-应力耦合过程对变形及应力状态也产生了明显的影响。     

Isogeometric analysis of THM coupled processes in ground freezing

An isogeometric analysis (IGA) based numerical model is presented for simulation of thermo-hydro-mechanically (THM) coupled processes in ground freezing. The momentum, mass and energy conservation equations are derived based on porous media theory. The governing equations are supplemented by a saturation curve, a hydraulic conductivity model and constitutive equations. Variational and Galerkin formulation results in a highly nonlinear system of equations, which are solved using Newton-Raphson iteration. Numerical examples on isothermal consolidation in plane strain, one-dimensional freezing and heave due to a chilled pipeline are presented. Reasonably good agreements were observed between the IGA based heave simulations and experimental results.