离岸流灾害水动力学过程的数值模拟研究

离岸流是近岸流的重要组成部分,当波浪受到特殊海滩地形的影响,会形成一股沿着离岸方向运动的高速水流,能够迅速将人带离海岸,对海滨安全造成威胁。为了深入探究离岸流的形成机理及水动力学特性,本文基于二阶Stokes波浪理论,采用了更为光滑的变截面沙坝模型,通过流体体积法捕捉自由液面,对离岸流进行三维数值模拟探究。本文重点分析了离岸流产生时流场的瞬时速度、时均速度、压强等不同参量的分布规律,结果显示在沙坝和海岸线之间,有一对方向相反的水循环体系;对比不同流层离岸流的速度,了解到波浪与离岸流的耦合作用;并探究了入射波波高对离岸流强度及分布区域的影响,深化了对离岸流水动力学过程的认识。     

水下平板与波浪相互作用完全非线性数值模拟

利用完全非线性数值波浪水槽技术研究水下平板与波浪的相互作用。假定水下平板厚度极薄、刚性,位于有限水深并且非常接近自由水面。应用四阶龙格库塔方法追踪每一时刻的波面形状,采用阻尼层来吸收反射波以保证算法的稳定性,同时引入平滑和重组的方法抑制自由表面控制点的较高梯度。通过对波浪与浮动圆柱相互作用的数值模拟证实了数值波浪水槽方法的有效性,计算结果与线性理论吻合良好。在波浪数值水槽方法中引入造波板模拟波浪产生并与水下平板发生相互作用,应用傅立叶解析方法对波面变形、波浪力作了分析。结果表明在板非常接近自由水面的情况下会表现出现很强的非线性,揭示了线性理论的局限性。     

Dynamics and control of a towed underwater vehicle system, part I: model development

Autonomous vehicles are being developed to replace the conventional, manned surface vehicles that tow mine hunting towed platforms. While a wide body of work exists that describes numerical models of towed systems, they usually include relatively simple models of the towed bodies and neglect the dynamics of the towing vehicle. For systems in which the mass of the towing vehicle is comparable to that of the towed vehicle, it becomes important to consider the dynamics of both vehicles. In this work, we describe the development of a numerical model that accurately captures the dynamics of these new mine hunting systems. We use a lumped mass approximation for the towcable and couple this model to non-linear numerical models of an autonomous surface vehicle and an actively controlled towfish. Within the dynamics models of the two vehicles, we include non-linear controllers to allow accurate maneuvering of the towed system.     

波浪作用下三角型人工鱼礁水动力特性数值模拟与实验验证

人工鱼礁在波浪作用下水动力特性的研究对于人工鱼礁的工程安全与设计具有非常重要的意义。基于有限体积法,采用推板造波形式,通过利用VOF方法求解波面的方式建立了模拟人工鱼礁与波浪相互作用的三维数值波浪水槽。基于该数值模型研究了波浪作用下三角型镂空人工鱼礁的受力情况,并与物理模型实验结果进行比较,结果显示模拟得到的人工鱼礁受力和波浪形态均与实验结果吻合良好。根据数值模拟结果,拟合出波浪作用下人工鱼礁的水动力系数。单体三角型镂空人工鱼礁的速度力系数Cd随着Kc数、Re数的增加呈现减小的趋势;惯性力系数Cm则随着Kc数、Re数的增加呈现波动趋势。数值模拟结果显示在一个波浪周期内,人工鱼礁周围产生了较强的上升流和回流,其内部产生了明显的涡旋结构。研究结果为人工鱼礁的设计优化提供了理论依据。     

Numerical Simulation of Dynamic Response of Supple Nets

1 .Introduction Owing to the decline of capture fisheries andsaturation of traditional inshorefarms ,sea cage cul-ture as a newtype of aquaculture is developingrapidlyin China .However ,cage culture is a highriskoperation.The practice is vulnerable to natural hazards ,such as strong tides ,storms and typhoons .So,it is necessaryto assess the behavior of a sea cage exposedto waves and current before the designandinstallation of the structure . Computer simulation,due to its many advantages ,ha…     

Numerical simulation of random wave slamming on structures in the splash zone

The numerical investigation of random wave slamming on superstructures of marine structures in the splash zone is presented in this paper. The impact pressures on the underside of the structure are computed based on the improved volume of fluid method (VOF). The governing equations are Reynolds time-averaged equations and the two equation k– model. The third order upwind difference scheme is applied to the convection term to reduce the effect of numerical viscosity. The numerical wave flume with random wave-maker suitable for VOF is established. Appropriate moving contact-line boundary conditions are introduced to the model wave in contact with and separated from the underside of structure. Parametric studies have been carried out for different incident waves, structure dimensions and structure clearance. The numerical results are verified by the experimental results.     

罗源湾潮流数值计算

研究罗源湾潮汐、潮流及潮波的传播,对罗源湾的开发及海岸工程建设具有一定的实际意义。为系统地了解罗源湾的潮汐、潮流状况,采用不规则三角形网格的分步杂交法,建立罗源湾海域二维变边界潮流数值模型,通过计算得到同潮时线与等振幅线、潮流椭圆、潮致欧拉余流分布及不同时刻潮流场分布。该海湾海流具往复流性质,潮汐、潮流均属正规半日潮,最大流速发生在可门水道。     

深海垂向流速剖面数值模拟

运用CFD软件对深海各种不同的垂向流速剖面进行数值模拟,分析研究试验区域内水流在空间上的流速分布情况以及湍流强度的变化,并与目标流速进行了比较.结合模型试验,表明数值模拟的结果是可靠的,造流系统能够较为准确地模拟出不同垂向流速剖面的海流,满足深水试验池对深海海流的模拟要求.     

Numerical simulation of sloshing waves in a 3D tank based on a finite element method

The sloshing waves in a three dimensional (3D) tank are analysed using a finite element method based on the fully non-linear wave potential theory. When the tank is undergoing two dimensional (2D) motion, the calculated results are found to be in very good agreement with other published data. Extensive calculation has been made for the tank in 3D motion. As in 2D motion, in addition to normal standing waves, travelling waves and bores are also observed. It is found that high pressures occur in various circumstances, which could have important implications for many engineering designs.     

Numerical model of a marine chute evacuation system

A lumped-mass model of a marine evacuation chute is presented based on the equations of Kane. The effects of wind load, internal mass transport and the motions of the ends are included. A sample of predicted motions and tensions is presented for a typical extreme environmental condition. The model may be used to assess the behaviour of the chute structure under a variety of emergency evacuation scenarios.     

北部湾潮汐潮流的数值模拟

基于正交曲线坐标的ECOMSED三维水动力模式,对北部湾的潮汐潮流进行数值模拟。选用不同的海底摩擦系数、海底粗糙度系数以及水平湍流摩擦系数进行数值试验。试验结果表明,当海底摩擦系数取2×10-3～3×10-3,海底粗糙度系数取1×10-3～2×10-3m,而水平湍流摩擦系数取1×102～5×103m2/s时,模拟所得潮汐、潮流结果与实测数据吻合较好;并由此对北部湾的潮汐、潮流和潮余流等特征进行了分析。还给出了垂直湍流黏滞系数呈抛物型的分布特征。对该海域的水动力状况有了进一步的了解,为该海域的环境保护规划提供了科学依据。     

Numerical simulation of the influences of sinker weight on the deformation and load of net of gravity sea cage in uniform flow

1IntroductionThe fish farming and aquaculture industry areexpanding and the demand for suitable locations forfish farms is increasing.In the future,more of thefish farms will be located offshore,as the number ofsuitable nearshore locations is limited.Futu…     

Numerical simulation of hydrocarbon migration in tight reservoir based on Artificial Immune Ant Colony Algorithm: A case of the Chang 81 reservoir of the Triassic Yanchang Formation in the Huaqing area,Ordos Basin,China

The hydrocarbon migration in tight reservoirs is a complex process, the fluid flow patterns of which are notably different from those of conventional reservoirs. Therefore, specific mathematical models are needed to simulate the secondary hydrocarbon migrations. This study presents a numerical simulation method based on Artificial Immune Ant Colony Algorithm (AIACA) to simulate the secondary hydrocarbon migrations in tight reservoirs. It consists of three core parts: (1) the release modes of artificial ants based on the intensity of hydrocarbon generation; (2) the wandering patterns of artificial ants under the control of the dynamic field and the distribution of pheromones; (3) the updating modes of pheromones based on the changes in reservoir wettability. The simulation of secondary migration can be realized by the observing the dynamic movements and accumulations of the artificial ants. The method has been tested in the Chang 8₁ tight sandstone reservoir, which is part of the Triassic Yanchang Formation in the Huaqing Area, Ordos Basin in China, and proved to be successful in matching the current data in exploration and development.     

二维圆柱涡激振动的数值模拟

采用动网格的动态层铺模型和滑移网格模型以及用户自定义接口编程,将计算结构响应的Newmark-β代码嵌入FLU-ENT软件,建立了2D圆柱横流向涡激振动(VIV)的计算模型。在雷诺数6×103~2×104或对应的约化速度Vr=3~10范围内,结合k-ω湍流模型,并且以静止圆柱为初始状态,首先计算了质量比m*=12.8、255.5和结构阻尼比ζ=0.0%、0.5%几种情况下圆柱的VIV。通过与经典的Feng-type图示比较发现,在小"组合参数"(m*ζ)情况下,计算结果与实验的"初始"支和最大响应吻合较好,同时观察到"初始"支与"下"支之间的"跳跃"现象。通过另外两组工况的计算发现,m*与ζ对圆柱振幅的影响不同,前者是完全非线性的,而后者几乎是线性的。     

Study of the dynamics of submerged supple nets (applications to trawls)

An iterative method is presented for determining the dynamic behaviour of submerged supple nets such as trawls. The flexible structure is modelised by a set of rigid bars. The junction points between the rigid elements are assumed to be rotoïdal links. The hydrodynamic forces, applied to each bar, are determined by combining and generalizing the Landweber and Morison hypothesis. All temporal derivative operators are approached by finite difference schemes. Some examples of the dynamic behaviour of a particular trawl are presented and qualitatively compared with flume tank observations.     

不同倒角半径柱体绕流数值模拟及水动力特性分析

为研究倒角半径变化对柱体绕流水动力特性的影响,本文使用Fluent软件,采用大涡模拟对雷诺数Re=3 900下的6种不同倒角半径的三维柱体进行了研究。在模型验证基础上,分析了由方柱渐变到圆柱过程中后方流场速度的时均特性及瞬时涡脱落变化规律,给出了不同倒角半径下的升、阻力系数值及无量纲涡脱频率St数。分析结果表明:平均阻力系数随倒角半径的增加而降低,在倒角半径为0.2D时下降速率最大,相较方柱降幅达到50%;升力系数均方根在倒角半径为0.1D~0.2D时变化最显著,减小约93%; St数随倒角半径增加而增大,在倒角半径为0.4D时可达到最大值;回流区长度随倒角半径的增加呈先增大后减小的趋势,其长度在倒角半径为0.2D时达到最大;尾涡宽度在倒角半径为0.0D最大,后随倒角半径增加逐渐下降,且当倒角半径大于0.2D以后变化不大。本文研究结果可为柱体绕流研究及相关工程应用提供参考。     

Analysis of formation pressure test results in the Mount Elbert methane hydrate reservoir through numerical simulation

Targeting the methane hydrate (MH) bearing units C and D at the Mount Elbert prospect on the Alaska North Slope, four MDT (Modular Dynamic Formation Tester) tests were conducted in February 2007. The C2 MDT test was selected for history matching simulation in the MH Simulator Code Comparison Study. Through history matching simulation, the physical and chemical properties of the unit C were adjusted, which suggested the most likely reservoir properties of this unit. Based on these properties thus tuned, the numerical models replicating “Mount Elbert C2 zone like reservoir”, “PBU L-Pad like reservoir” and “PBU L-Pad down dip like reservoir” were constructed. The long term production performances of wells in these reservoirs were then forecasted assuming the MH dissociation and production by the methods of depressurization, combination of depressurization and wellbore heating, and hot water huff and puff. The predicted cumulative gas production ranges from 2.16 × 10⁶ m³/well to 8.22 × 10⁸ m³/well depending mainly on the initial temperature of the reservoir and on the production method.This paper describes the details of modeling and history matching simulation. This paper also presents the results of the examinations on the effects of reservoir properties on MH dissociation and production performances under the application of the depressurization and thermal methods.     

Analysis of hydrodynamic behaviors of gravity net cage in irregular waves

Based on the lumped-mass method and rigid-body kinematics theory, a mathematical model of a gravity cage system attacked by irregular waves is developed to simulate the hydrodynamic response of cage system, including the maximum tension of mooring lines and the motion of float collar. The normalized response amplitudes (response amplitude operators) are calculated for the cage motion response in heave and surge, and the mooring line tension response, in regular waves. In addition, a statistical approach is taken to determine the motion and tension transfer functions in irregular waves. In order to validate the numerical model of a gravity cage attacked by irregular waves, numerical predictions have been compared with the experimental observations in the time and frequency domain. The effect of wave incident angle on the float collar motion, mooring line tension and net volume reduction of the gravity cage system in irregular waves is also investigated. The results show that at high frequencies, the cage system has no significant heave motion. It tends to contour itself to longer waves. The variation amplitude of mooring line forces decreases as the wave frequency increases. With the increasing of wave incident angle, the horizontal displacement of the float collar increases.     

Numerical simulation and experimental research on hydrodynamic performance of propeller with varying shaft depths

In order to study hydrodynamic performance of a propeller in the free surface, the numerical simulation and open-water experiments are carried out with varying shaft depths of propeller. The influences of shaft depths of a propeller on thrust and torque coefficient in calm water are mainly studied. Meanwhile, this paper also studies the propeller air-ingestion under special working conditions by experiment and theoretical calculation method, and compares the calculation results and experimental results. The results prove that the theoretical calculation model used in this paper can imitate the propeller air-ingestion successfully. The successful phenomenon simulation provides an essential theoretical basis to understand the physical essence of the propeller air-ingestion.