Late Cretaceous to Early Tertiary palaeogeography of the Western Carpathians (Slovakia) and the Eastern Alps (Austria): implications from heavy mineral data

The Late Cretaceous Brezová and Myjava Groups of the Western Carpathians in Slovakia and formations of the Gosau Group of the Northern Calcareous Alps in Lower Austria comprise similar successions of alluvial/shallow marine deposits overlain by deep water hemipelagic sediments and turbidites. In both areas the heavy mineral spectra of Late Cretaceous sediments contain significant amounts of detrital chrome spinel. In the Early Tertiary the amount of garnet increases. Cluster analysis and correspondence analysis of Coniacian/Santonian and Campanian/Early Maastrichtian heavy mineral data indicate strong similarities between the Gosau deposits of the Lunz Nappe of the north-eastern part of the Northern Calcareous Alps and the Brezova Group of the Western Carpathians. Similar source areas and a similar palaeogeographical position at the northern active margin of the Adriatic/Austroalpine plate are therefore suggested for the two tectonic units.Basin subsidence mechanisms within the Late Cretaceous of the Northern Calcareous Alps are correlated with the Western Carpathians. Subsidence during the Campanian-Maastrichtian is interpreted as a consequence of subduction tectonic erosion along the active northern margin of the Adriatic/Austroalpine plate. Analogous facies and heavy mineral associations from deep water sandstones of the Manin Unit and the Klape Unit indicate accretion of parts of the Pieniny Klippen Belt during the Late Cretaceous along the Adriatic/Austroalpine margin.     

Late Jurassic tectonics and sedimentation: breccias in the Unken syncline,central Northern Calcareous Alps

This study analyses and discusses well preserved examples of Late Jurassic structures in the Northern Calcareous Alps, located at the Loferer Alm, about 35 km southwest of Salzburg. A detailed sedimentary and structural study of the area was carried out for a better understanding of the local Late Jurassic evolution. The Grubhörndl and Schwarzenbergklamm breccias are chaotic, coarse-grained and locally sourced breccias with mountain-sized and hotel-sized clasts, respectively. Both breccias belong to one single body of breccias, the Grubhörndl breccia representing its more proximal and the Schwarzenbergklamm breccia its more distal part, respectively. Breccia deposition occurred during the time of deposition of the Ruhpolding Radiolarite since the Schwarzenbergklamm breccia is underlain and overlain by these radiolarites. Formation of the breccias was related to a major, presumably north-south trending normal fault scarp. It was accompanied and post-dated by west-directed gravitational sliding of the Upper Triassic limestone (“Oberrhätkalk”), which was extended by about 6% on top of a glide plane in underlying marls. The breccia and slide-related structures are sealed and blanketed by Upper Jurassic and Lower Cretaceous sediments. The normal fault scarp, along which the breccia formed, was probably part of a pull-apart basin associated with strike slip movements. On a regional scale, however, we consider this Late Jurassic strike-slip activity in the western part of the Northern Calcareous Alps to be synchronous with gravitational emplacement of “exotic” slides and breccias (Hallstatt mélange), triggered by Late Jurassic shortening in the eastern part of the Northern Calcareous Alps. Hence, two competing processes affected one and the same continental margin.     

Late Cretaceous extension overprinting a steep belt in the Northern Calcareous Alps (Schesaplana, R?tikon, Switzerland and Austria)

The Triassic to Cretaceous sediment succession of the Lechtal Nappe in the western part of the Northern Calcareous Alps (NCA) has been deformed into large-scale folds and crosscut by thrust and extensional faults during Late Cretaceous (Eoalpine) and Tertiary orogenic processes. The following sequence of deformation is developed from overprinting relations in the field: (D1) NW-vergent folds related to thrusting; (D2) N–S shortening leading to east–west-trending folds and to the formation of a steep belt (Arlberg Steep Zone) along the southern border of the NCA; (D3) E–W to NE–SW extension and vertical shortening, leading to low-angle normal faulting and recumbent “collapse folds” like the Wildberg Syncline. D1 and D2 are Cretaceous in age and predate the Eocene emplacement of the Austroalpine on the Penninic Nappes along the Austroalpine basal thrust; the same is probably true for D3. Finally, the basal thrust was deformed by folds related to out-of-sequence thrusting. These results suggest that the NCA were at least partly in a state of extension during the sedimentation of the Gosau Group in the Late Cretaceous.     

Deep structure and kinematics of the Northern Calcareous Alps (TRANSALP Profile)

The Northern Calcareous Alps (NCA) of southern Bavaria and northern Tyrol constitute a carbonate-dominated polyphase fold-thrust wedge; together with its Grauwacken Zone Basement, it is the northernmost part of the far-travelled Upper Austroalpine thrust complex of the Eastern Alps. The present geometry developed in several kinematic stages. Jurassic extensional faults that affected large parts of the NCA and their basement originated when the main part of the NCA was still located southeast of the Central Alpine Ötztal-Silvretta complex. These faults and related facies transitions influenced the later style of detachment of the NCA thrust sheets. Mid to Late Cretaceous detachment, thrust-sheet stacking and motion over the Central Alpine complex are registered in clastic deposits of syntectonic basins. The latest Cretaceous to Cenozoic NNE- to N-directed motion of the NCA towards Europe in front of the Central Alpine complex created another set of significant contraction structures, which at depth overprinted all previous structures. During Cretaceous to Cenozoic deformation, the NCA experienced about 80 km of shortening, i.e., about 73% along the TRANSALP Profile. The European basement and autochthonous Mesozoic cover beneath the allochthonous NCA thrust sheets and flysch complexes seem to have remained relatively undeformed.     

奥地利Gosau群Bibereck组Campanian早期海水变深序列的地层学和地球化学

Schmidsippl剖面位于奥地利北钙质阿尔卑斯构造带内Gosau群典型地区。剖面出露的Bibereck组记录了一个海侵和沉积区海水变深过程。Bibereck 组之下是Santonian 晚期Hochmoos 组(Sandkalkbank段),主要为砂质、粉砂质灰色生物扰动构造发育的泥灰岩,含少量双壳类碎片。Hochmoos组之上为灰色泥灰岩和泥灰质灰岩。Bibereck组下部显示变深到近滨-远滨过渡带区域;向上,泥灰岩指示细粒泥质远滨沉积,水深大致50~150 m;之上出现浮游有孔虫含量超过90%的泥灰质灰岩,代表着半深海沉积环境。生物地层数据显示采样层位整体位于浮游有孔虫asymetrica elevata 带,由Globotruncanita elevata 和Dicarinellaasymetrica 的共同出现来界定。钙质超微化石Calculites obscurus、Lucianorhabdus cayeuxii、Arkhangelsk iella cymbiformis 的出现指示属于钙质超微化石带CC17b/UC12,相当于Campanian初期。地层深度剖面上,Ca/Al比值和Catot含量显示海水来源的Ca在0~5 m地层内几近于零,向上快速增加;(Fe/Al)/碳酸盐显示两个峰值,代表更还原条件,分别位于4 m和10 m位置;K/Al比值的下降被解释为更潮湿气候条件;剖面上部Ba含量的增加显示向更低原始生产条件的变化;陆源矿物在剖面7 m以下保持稳定,之上一直到剖面顶部不断下降。生物地层     

Palynomorphe und organisches Material aus den Raibler Schichten einer oberostalpinen Schuppe der Iberger Klippen (Kanton Schwyz, Schweiz)

A palynology and organic matter study has been carried out on samples of the Upper Triassic Raibl beds from an Upper Austroalpine thrust sheet, preserved in the area of the Iberg Klippen (Laucherenst?ckli). The palynological assemblages indicate an early Carnian (Julian) age. Comparison with well calibrated successions from the Southern Alps suggests a correlation with the Late Julian ammonoid zone Austrotrachyceras austriacum. The lithofacies of the studied sections suggests a substantial similarity to Raibl beds of the Upper Austroalpine of the Northern Calcareous Alps and those of the Silvretta- and the S-charl nappe of the Grisons. The minute Upper Austroalpine thrust sheet represents the westward extension of series with similar facies, which are still preserved in the Northern Calcareous Alps of Liechtenstein and western Austria (Vorarlberg). According to the Thermal Alteration Scale (TAS) of Batten (1996) the observed medium brown colors of the pollen grains correspond to a value of 4/5, which is equivalent to vitrinite reflectance (VR) values of 0.7–0.9 %R_o. In comparison with other sites in Liechtenstein, Vorarlberg and the Upper Austroalpine of Central Grisons (Silvretta and S-charl nappe) with measured VR values of > 2%R_o the organic matter of the studied samples shows only minor thermal alteration, indicating that the Upper Austroalpine thrust sheets of Iberg represent the highest part of the nappe stack in Central Switzerland, formerly covered by a comparatively thin overburden.      

Stratigraphy and sedimentation rates of Upper Cretaceous deep-water systems of the Rhenodanubian Group (Eastern Alps, Germany)

In the Bavarian Alps (Germany), west of the Isar River, the abyssal deposits of the Lower Barremian to Upper Campanian Rhenodanubian Group consist of siliciclastic and calcareous turbidites alternating with hemipelagic non-calcareous mudstones. The up to 1500-m-thick succession, deposited in the Penninic Basin to the south of the European Plate, is characterized by a low mean sedimentation rate (c. 25 mm kyr⁻¹) over 60 million years. Palaeocurrents and turbidite facies distribution patterns suggest that sedimentation occurred on a weakly inclined abyssal plain. The highest sedimentation rates (up to 240 mm kyr⁻¹) were associated with the calcareous mud turbidites of the newly defined Röthenbach Subgroup, which includes the Piesenkopf, Kalkgraben and Hällritz formations (Middle Coniacian to Middle Campanian). These calcareous turbidites prograded from the west, and interfinger towards the east with red hemipelagic claystone. A high sea level presumably favoured pelagic carbonate production and accumulation on the shelves and on internal platforms in the western part of the basin, whereas siliciclastic shelves with steep slope angles have bordered the eastern part of the basin, where a dearth of turbidite sedimentation and increased Cretaceous oceanic red beds deposition occurred. In contrast to the eustatically-induced Middle Coniacian to Lower Campanian Cretaceous oceanic red beds (calcareous nannoplankton zones CC14 to CC18), red hemipelagites of Early Cenomanian age (upper part of calcareous nannoplankton zone CC9) and early Late Campanian age (upper part of zone CC21 and zone CC22) are interpreted as the result of regional tectonic activity.     

Provenance of the Upper Cretaceous to Eocene Gosau Group around and beneath the Vienna Basin (Austria and Slovakia)

Chemistry of detrital garnets, chrome spinels and tourmalines of 30 selected samples in combination with the general heavy mineral distribution from 523 sandstone samples of the Upper Cretaceous to Eocene Gosau Group of the eastern part of the Eastern Alps and the western West Carpathians result in an advanced picture of sedimentary provenance and palaeogeographic evolution of that area. Garnets from Coniacian to Campanian sediments are partly derived from a metamorphic sole remnant of Neotethys ophiolites to the south. Tectonically high ophiolitic nappes, later on completely eroded, supplied mainly the paleogeographically southern Grünbach and Glinzendorf Gosau basins with ultramafic detritus, represented by chrome spinels of a mixed harzburgite/lherzolite composition, whereas no direct indications for a northern ophiolitic source, the Penninic accretionary wedge to the north of the Gosau basins, could be found. In the younger part of the Gosau basins fill, from the Maastrichtian to the Eocene, only almandine-rich garnets could be observed suggesting a southern provenance from low-grade metamorphic metapelites of exhuming Austroalpine metamorphic complexes. Ophiolite detritus is reduced in the Maastrichtian and disappears in the Paleogene.     

Anchimetamorphose im Anis und Ladin (Trias) der Nördlichen Kalkalpen zwischen Arlberg und Kaisergebirge — ihre Verbreitung und deren baugeschichtliche Bedeutung

Anisian to Ladinian sedimentary rocks of the Northern Calcareous Alps from the area between the Arlberg pass and the Kaisergebirge mountains have been sampled (more than 2500 samples) in about 50 stratigraphic profiles, recorded in great detail. The (silicate) mineral residue, fraction below 2 micron, resulting from solution in formic acid, has been investigated mineralogically. Its sheet silicate content proved to be markedly homogeneous, containing mainly di-octahedral illite minerals, their crystallinity as most prominent result found to increase in a twofold way:

1. The (Upper Austro-Alpine) Lechtal-Nappe is in its southern part characterized by increasing illite crystallinity from hanging to basal strata within the Ladinian to Anisian stratigraphic column. The source of this effect is found to be older than folding was.
2. The whole area of sedimentary rocks investigated here presents an increase in illite crystallinity data from north to south (i. e. towards the Central Alpine metamorphic units), irrespective of the presently existing tectonic structures (folding or nappe units within the Upper Austro-Alpine of the Northern Calcareous Alps). Hence the source of this effect must be younger than these events were. With this also a broad margin of “anchimetamorphic” influence has been detected within the southern part of the Northern Calcareous Alps, in the area of the Mieminger and Wetterstein mountains showing even a strong extension towards the north (reaching the location of Garmisch-Partenkirchen)

. These effects can by no means be attributed simply to sedimentary mineral distribution. Contradictionary to such an interpretation are the non-conformity of the illite crystallinity distribution within the existing tectonic setting to the original sedimentary position as well as general sedimentary data (paleo-morphology within the sedimentation area compared to homogeneous mineral distribution). Also (former or recent) sedimentary overburden cannot be quoted for as explanation, with no indication for this influence found so far in the stratigraphie profiles investigated at the thick Triassic sedimentary rock sequence in the steep descent of the Southern Karwendel mountains as well as in more than 6400 m of sedimentary rock sequence investigated in the ultradeep exploration borehole Vorderriß 1. The effects described here are attributed to very low grade metamorphic (“anchimetamorphic”) influences detected by these investigations within the Northern Calcareous Alps. A much higher influence due to increase in temperature compared to increase of pressure is indicated by experimental work done by the author. Even with a cautious attempt to incorporate these newly found temperature effects on Triassic sedimentary rocks into the geologic development of the Northern Calcareous Alps and the Alpine Orogeny, at least for the older effect the conception of “transported” metamorphism is implied, perhaps also for the younger one. This idea is furthermore supported by K/Ar — age determinations of well ordered illite minerals gained from the Schwaz Triassic occurrence, yielding data of about 110–120 mio. y. This age for the older temperature effect can be explained in terms of (starting?) subduction of Penninic units below Austro-Alpine units, long before Austro-Alpine nappes reached their present position within the Northern Calcareous Alps.     

Die muttekopfgosau (Lechtaler Alpen,Tirol/Österreich): Sedimentologie und Beckenentwicklung

In the Eastern Alps compression during orogeny in the Upper Cretaceous caused crustal thickening, isostatic uplift and gravitational adjustment of the unstable orogenic wedge. This process triggered extensional basin formation on the back of the orogen (Gosau Basins). The basin fill of the Muttekopf Gosau Basin is arranged in megacycles, the first one comprising alluvial fan sediments and “Inoceramus marls” of the Lower Gosau Complex (Faupl et al. 1987) of Santonian age. Three other cycles follow (Upper Gosau Complex, Campanian to Maastrichtian), consisting of turbiditic fining upward sequences, that are indicative for extensional tectonics during basin formation, as subsidence events prevent formation of autocyclic coarsening upward sequences and therefore prograding of the turbidite system. Deposition of the 1st and 2nd Megacycle occured below the CCD (Carbonate Compensation Depth). The carbonate rich 3rd Megacycle was deposited probably below the CCD after a period of palaeogeographic reorganisation (uplift?) in the source area.     

Origin of deformed halite hopper crystals, pseudomorphic anhydrite cubes and polyhalite in Alpine evaporites (Austria, Germany)

The Alpine Haselgebirge Formation represents an Upper Permian to Lower Triassic evaporitic rift succession of the Northern Calcareous Alps (Eastern Alps). Although the rocksalt body deposits are highly tectonised, consisting mainly of protocataclasites and mylonites of halite and mudrock, the early diagenetic history can be established from non-tectonised mudrock bodies: Cm-sized euhedral halite hopper crystals formed as displacive cubes within mud just during shallow burial. The crystals were deformed by subsequent compaction. Later, migrating fluids led to the replacement of halite by anhydrite retaining the shapes of deformed halite cubes. Polyhalite formed from subsequent enhanced fluid migration. Mudrock provided water by dewatering, while potassium and magnesium were dissolved from primary salt minerals. When these fluids interacted with sulphates, polyhalite precipitated. ⁴⁰Ar/³⁹Ar analyses date the polyhalite from within the retaining shapes of deformed halite hopper-shaped cubes from two localities to ca. 235–232 Ma (Middle Triassic). At this time, ca. 20–25 Ma after sedimentation, polyhalite crystallised at shallow levels.     

The change from rifting to thrusting in the Northern Calcareous Alps as recorded in Jurassic sediments

Facies analysis, fossil dating, and the study of the metamorphism in the Late Triassic to Early Cretaceous sedimentary successions in the central part of the Northern Calcareous Alps allow to reconstruct the tectonic evolution in the area between the South Penninic Ocean in the northwest and the Tethys Ocean with the Hallstatt Zone in the southeast. The Triassic as well as the Early and Middle Jurassic sediments were deposited in a rifted, transtensive continental margin setting. Around the Middle/Late Jurassic boundary two trenches in front of advancing nappes formed in sequence in the central part of the Northern Calcareous Alps. The southern trench (Late Callovian to Early Oxfordian) accumulated a thick succession of gravitatively redeposited sediments derived from the sedimentary sequences of the accreted Triassic–Liassic Hallstatt Zone deposited on the outer shelf and the margin of the Late Triassic carbonate platform. During a previous stage these sediments derived from sequences deposited on the more distal shelf (Salzberg facies zone of Hallstatt unit, Meliaticum), and in a later stage from more proximal parts (Zlambach facies zone of Hallstatt unit, Late Triassic reef belt). Low temperature–high pressure metamorphism of some Hallstatt limestones before redeposition is explained by the closure of parts of the Tethys Ocean in Middle to Late Jurassic times and associated subduction. In the northern trench (Late Oxfordian to Kimmeridgian) several hundred meters of sediment accumulated including redeposited material from a nearby topographic rise. This rise is interpreted as an advancing nappe front as a result of the subduction process. The sedimentary sealing by Tithonian sediments, documented by uniform deep-water sedimentation (Oberalm Formation), gives an upper time constraint for the tectonic events. In contrast to current models, which propose an extensional regime for the central and eastern Northern Calcareous Alps in the Late Jurassic, we propose a geodynamic model with a compressional regime related to the Kimmerian orogeny.     

Balancing lateral orogenic float of the Eastern Alps

Oligocene to Miocene post-collisional shortening between the Adriatic and European plates was compensated by frontal thrusting onto the Molasse foreland basin and by contemporaneous lateral wedging of the Austroalpine upper plate. Balancing of the upper plate shortening by horizontal retrodeformation of lateral escaping and extruding wedges of the Austroalpine lid enables an evaluation of the total post-collisional deformation of the hangingwall plate. Quantification of the north–south shortening and east–west extension of the upper plate is derived from displacement data of major faults that dissect the Austroalpine wedges. Indentation of the South Alpine unit corresponds to 64 km north–south shortening and a minimum of 120 km of east–west extension. Lateral wedging affected the Eastern Alps east of the Giudicarie fault. West of the Giudicarie fault, north–south shortening was compensated by 50 to 80 km of backthrusting in the Lombardian thrust system of the Southern Alps. The main structures that bound the escaping wedges to the north are the Inntal fault system (ca. 50 km sinistral offset), the Königsee–Lammertal–Traunsee (KLT) fault (10 km) and the Salzach–Ennstal–Mariazell–Puchberg (SEMP) fault system (60 km). These faults, as well as a number of minor faults with displacements less than 10 km, root in the basal detachment of the Alps. The thin-skinned nature of lateral escape-related structures north of the SEMP line is documented by industry reflection seismic lines crossing the Northern Calcareous Alps (NCA) and the frontal thrust of the Eastern Alps. Complex triangle zones with passive roof backthrusts of Middle Miocene Molasse sediments formed in front of the laterally escaping wedges of the northern Eastern Alps. The aim of this paper is a semiquantitative reconstruction of the upper plate of the Eastern Alps. Most of the data is published elsewhere.     

Reconstruction of the geodynamic evolution of the Northern Calcareous Alps by means of paleomagnetism

We review the paleomagnetic studies published on the Northern Calcareous Alps (NCA) and also include data from two theses that were not published yet. Moreover, we present new data from upper Santonian to Maastrichtian Gosau deposits from the Neue Welt Area in the easternmost part of the NCA (D = 325.8. I = 37.1, α₉₅ = 8.3, positive fold test, thus indicating counterclockwise rotation and inclination flattening). Although several of the recently published studies provide valuable data, presently the paleomagnetic data base of the NCA does not provide a sufficient frame work for a quantitatively backed paleogeographic model. By thus documenting the state of research, we want to outline major problems regarding the paleomagnetic characterization of the NCA and also specify the kind of paleomagnetic future work that is particularly needed within this mountain range.     

Thermal history of the evaporitic Haselgebirge mélange in the Northern Calcareous Alps (Austria)

In the central and eastern part of the Northern Calcareous Alps, Upper Permian evaporitic rocks form a tectonic mélange whose distribution is restricted largely to the topmost thrust unit (Juvavicum). Mudrock and dolostone samples associated with the evaporites in ten major outcrops (mostly mines) were examined in order to constrain the paleothermal conditions of the mélange. Measurements of illite "crystallinity" reveal a regionally variable pattern of metamorphic grade ranging from diagenesis to the high anchizone and possibly epizone. Most samples contained very little organic matter and vitrinite particles were rare. Samples containing vitrinite show consistent minimum reflectance values of ～1.3–1.7% R_o, whereas maximum reflectance values are more variable (up to 4.9%). The former data constrain the minimum burial temperatures to ～160–180°C. The observed variability in illite "crystallinity" and organic maturity both between and within individual outcrops is consistent with the mélange architecture of this unit and is in good agreement with the regional thermal pattern recognized in Middle to Upper Triassic carbonate formations within the Juvavicum by conodont color alteration studies. Mélange formation and heating of the evaporites is suggested to be linked to the Upper Jurassic closure of the Meliata-Hallstatt Ocean and subsequent thrusting of obducted terranes (Juvavicum) into the depositional realm of the Northern Calcareous Alps.     

Berriasian drowning of the Plassen carbonate platform at the type-locality and its bearing on the early Eoalpine orogenic dynamics in the Northern Calcareous Alps (Austria)

The Plassen carbonate platform (Kimmeridgian to Early Berriasian) developed above the Callovian to Tithonian carbonate clastic radiolaritic flysch basins of the Northern Calcareous Alps during a tectonically active period in a convergent regime. Remnants of the drowning sequence of the Plassen Formation have been discovered at Mount Plassen in the Austrian Salzkammergut. It is represented by calpionellid-radiolaria wacke- to packstones that, due to the occurrence of Calpionellopsis oblonga (Cadisch), are of Late Berriasian age (oblonga Subzone). Thus, the Plassen Formation at its type-locality shows the most complete profile presently known, documenting the carbonate platform evolution from the initial shallowing upward evolution in the Kimmeridgian until the final Berriasian drowning. The shift from neritic to pelagic sedimentation took place during Berriasian times. A siliciclastic-influenced drowning sequence sealed the highly differentiated Plassen carbonate platform. The former interpretation of a Late Jurassic carbonate platform formed under conditions of tectonic quiescence cannot be confirmed. The onset, evolution and drowning of the Plassen carbonate platform took place at an active continental margin. The tectonic evolution of the Northern Calcareous Alps during the Kimmeridgian to Berriasian time span and the reasons for the final drowning of the Plassen carbonate platform are to be seen in connection with further tectonic shortening after the closure of the Tethys Ocean.     

Biostratigraphy and depositional facies of the Cretaceous-Tertiary boundary strata in Amakusa-Shimojima,Kyushu, Western Japan

The Upper Himenoura Subgroup exposed in the island of Amakusa-Shimojima, Kyushu, Japan shows an example of the terminal Cretaceous stratigraphic record in the circum Pacific region. This sequence is a part of the Upper Cretaceous intra-arc basins of southwest Japan. Four cycles of upward coarse-graded facies are recognized. Each cycle consists of a basinal mud facies in the lower part and a tide-dominated shallow marine to brackish coarse clastic facies in the upper part. Biostratigraphic correlation chiefly based on ammonites, inocerami and trigoniids indicates that this sequence is Campanian to Maastrichtian in age. The occurrence of the above three fossils decreases upward and is terminated at the top of the sequence, being replaced by a molluscan assemblage similar to the Danian. This suggests that the sedimentation may have continued to the very end of the Cretaceous period and possibly to the beginning of the Tertiary.     

Stratigraphy of the upper cretaceous and lower tertiary strata in the Tethyan Himalayas of Tibet (Tingri area,China)

The 1500-m-thick marine strata of the Tethys Himalaya of the Zhepure Mountain (Tingri, Tibet) comprise the Upper Albian to Eocene and represent the sedimentary development of the passive northern continental margin of the Indian plate. Investigations of foraminifera have led to a detailed biozonation which is compared with the west Tethyan record. Five stratigraphic units can be distinguished: The Gamba group (Upper Albian - Lower Santonian) represents the development from a basin and slope to an outer-shelf environment. In the following Zhepure Shanbei formation (Lower Santonian - Middle Maastrichtian), outer-shelf deposits continue. Pebbles in the top layers point to beginning redeposition on a continental slope. Intensified redeposition continues within the Zhepure Shanpo formation (Middle Maastrichtian - Lower Paleocene). The series is capped by sandstones of the Jidula formation (Danian) deposited from a seaward prograding delta plain. The overall succession of these units represents a sea-level high at the Cenomanian/Turonian boundary followed, from the Turonian to Danian, by an overall shallowing-upward megasequence. This is followed by a final transgression — regression cycle during the Paleocene and Eocene, documented in the Zhepure Shan formation (?Upper Danian - Lutetian) and by Upper Eocene continental deposits. The section represents the narrowing and closure of the Tethys as a result of the convergence between northward-drifting India and Eurasia. The plate collision started in the Lower Maastrichtian and caused rapid changes in sedimentation patterns affected by tectonic subsidence and uplift. Stronger subsidence and deposition took place from the Middle Maastrichtian to the Lower Paleocene. The final closure of remnant Tethys in the Tingri area took place in the Lutetian.