Irrigation produces elevated arsenic in the underlying groundwater of a semi-arid basin in Southwestern Idaho

The shallow aquifer beneath the Western Snake River Plain (Idaho, USA) exhibits widespread elevated arsenic concentrations (up to 120 μg L⁻¹). While semi-arid, crop irrigation has increased annual recharge to the aquifer from approximately 1 cm prior to a current rate of >50 cm year⁻¹. The highest aqueous arsenic concentrations are found in proximity to the water table (all values >50 μg L⁻¹ within 50 m) and concentrations decline with depth. Despite strong vertical redox stratification within the aquifer, spatial distribution of aqueous species indicates that redox processes are not primary drivers of arsenic mobilization. Arsenic release and transport occur under oxidizing conditions; groundwater wells containing dissolved arsenic at >50 μg L⁻¹ exhibit elevated concentrations of O₂ (average 4 mg L⁻¹) and NO₃ (average 8 mg L⁻¹) and low concentrations of dissolved Fe (<20 μg L⁻¹). Sequential extractions and spectroscopic analysis of surficial soils and sediments indicate solid phase arsenic is primarily arsenate and is present at elevated concentrations (4–45 mg kg⁻¹, average: 17 mg kg⁻¹) relative to global sedimentary abundances. The highest concentrations of easily mobilized arsenic (up to 7 mg kg⁻¹) are associated with surficial soils and sediments visibly stained with iron oxides. Batch leaching experiments on these materials using irrigation waters produce pore water arsenic concentrations approximating those observed in the shallow aquifer (up to 152 μg L⁻¹). While As:Cl aqueous phase relationships suggest minor evaporative enrichment, this appears to be a relic of the pre-irrigation environment. Collectively, these data indicate that infiltrating irrigation waters leach arsenic from surficial sediments to the underlying aquifer.     

Sedimentary iron geochemistry in acidic waterways associated with coastal lowland acid sulfate soils

We examined the solubility, mineralogy and geochemical transformations of sedimentary Fe in waterways associated with coastal lowland acid sulfate soils (CLASS). The waterways contained acidic (pH 3.26-3.54), Fe^III-rich (27-138 μM) surface water with low molar Cl:SO₄ ratios (0.086-5.73). The surficial benthic sediments had high concentrations of oxalate-extractable Fe(III) due to schwertmannite precipitation (kinetically favoured by 28-30% of aqueous surface water Fe being present as the Fe^III species). Subsurface sediments contained abundant pore-water HCO₃ (6-20 mM) and were reducing (Eh < −100 mV) with pH 6.0-6.5. The development of reducing conditions caused reductive dissolution of buried schwertmannite and goethite (formed via in situ transformation of schwertmannite). As a consequence, pore-water Fe^II concentrations were high (>2 mM) and were constrained by precipitation-dissolution of siderite. The near-neutral, reducing conditions also promoted SO₄-reduction and the formation of acid-volatile sulfide (AVS). The results show, for the first time for CLASS-associated waterways, that sedimentary AVS consisted mainly of disordered mackinawite. In the presence of abundant pore-water Fe^II, precipitation-dissolution of disordered mackinawite maintained very low (i.e. <0.1 μM) S^−II concentrations. Such low concentrations of S^−II caused slow rates for conversion of disordered mackinawite to pyrite, thereby resulting in relatively low concentrations of pyrite (<300 μmol g⁻¹ as Fe) compared to disordered mackinawite (up to 590 μmol g⁻¹ as Fe). This study shows that interactions between schwertmannite, goethite, siderite, disordered mackinawite and pyrite control the geochemical behaviour of sedimentary Fe in CLASS-associated waterways.     

Palaeo-hydrogeological control on groundwater As levels in Red River delta,Vietnam

To study the geological control on groundwater As concentrations in Red River delta, depth-specific groundwater sampling and geophysical logging in 11 monitoring wells was conducted along a 45 km transect across the southern and central part of the delta, and the literature on the Red River delta’s Quaternary geological development was reviewed. The water samples (n = 30) were analyzed for As, major ions, Fe²⁺, H₂S, NH₄, CH₄, δ¹⁸O and δD, and the geophysical log suite included natural gamma-ray, formation and fluid electrical conductivity. The SW part of the transect intersects deposits of grey estuarine clays and deltaic sands in a 15–20 km wide and 50–60 m deep Holocene incised valley. The NE part of the transect consists of 60–120 m of Pleistocene yellowish alluvial deposits underneath 10–30 m of estuarine clay overlain by a 10–20 m veneer of Holocene sediments. The distribution of δ¹⁸O-values (range −12.2‰ to −6.3‰) and hydraulic head in the sample wells indicate that the estuarine clay units divide the flow system into an upper Holocene aquifer and a lower Pleistocene aquifer. The groundwater samples were all anoxic, and contained Fe²⁺ (0.03–2.0 mM), Mn (0.7–320 μM), SO₄ (<2.1 μM–0.75 mM), H₂S (<0.1–7.0 μM), NH₄ (0.03–4.4 mM), and CH₄ (0.08–14.5 mM). Generally, higher concentrations of NH₄ and CH₄ and low concentrations of SO₄ were found in the SW part of the transect, dominated by Holocene deposits, while the opposite was the case for the NE part of the transect. The distribution of the groundwater As concentration (<0.013–11.7 μM; median 0.12 μM (9 μg/L)) is related to the distribution of NH₄, CH₄ and SO₄. Low concentrations of As (?0.32 μM) were found in the Pleistocene aquifer, while the highest As concentrations were found in the Holocene aquifer. PHREEQC-2 speciation calculations indicated that Fe²⁺ and H₂S concentrations are controlled by equilibrium for disordered mackinawite and precipitation of siderite. An elevated groundwater salinity (Cl range 0.19–65.1 mM) was observed in both aquifers, and dominated in the deep aquifer. A negative correlation between aqueous As and an estimate of reduced SO₄ was observed, indicating that Fe sulphide precipitation poses a secondary control on the groundwater As concentration.     

Sulfur speciation in natural hydrothermal waters, Iceland

The speciation of aqueous dissolved sulfur was determined in hydrothermal waters in Iceland. The waters sampled included hot springs, acid-sulfate pools and mud pots, sub-boiling well discharges and two-phase wells. The water temperatures ranged from 4 to 210 °C, the pH_T was between 2.20 and 9.30 at the discharge temperature and the SO₄ and Cl concentrations were 0.020-52.7 and <0.01-10.0 mmol kg⁻¹, respectively. The analyses were carried out on-site within ∼10 min of sampling using ion chromatography (IC) for sulfate (SO₄²⁻), thiosulfate (S₂O₃²⁻) and polythionates (S_xO₆²⁻) and titration and/or colorimetry for total dissolved sulfide (S²⁻). Sulfite (SO₃²⁻) could also be determined in a few cases using IC. Alternatively, for few samples in remote locations the sulfur oxyanions were stabilized on a resin on site following elution and analysis by IC in the laboratory. Dissolved sulfate and with few exceptions also S²⁻ were detected in all samples with concentrations of 0.02-52.7 mmol kg⁻¹ and <1-4100 μmol kg⁻¹, respectively. Thiosulfate was detected in 49 samples of the 73 analyzed with concentrations in the range of <1-394 μmol kg⁻¹ (S-equivalents). Sulfite was detected in few samples with concentrations in the range of <1-3 μmol kg⁻¹. Thiosulfate and SO₃²⁻ were not detected in <100 °C well waters and S₂O₃²⁻ was observed only at low concentrations (<1-8 μmol kg⁻¹) in ∼200 °C well waters. In alkaline and neutral pH hot springs, S₂O₃²⁻ was present in significant concentrations sometimes corresponding to up to 23% of total dissolved sulfur (S_TOT). In steam-heated acid-sulfate waters, S₂O₃²⁻ was not a significant sulfur species. The results demonstrate that S₂O₃²⁻ and SO₃²⁻ do not occur in the deeper parts of <150 °C hydrothermal systems and only in trace concentrations in ∼200-300 °C systems. Upon ascent to the surface and mixing with oxygenated ground and surface waters and/or dissolution of atmospheric O₂, S²⁻ is degassed and oxidized to SO₃²⁻ and S₂O₃²⁻ and eventually to SO₄²⁻ at pH >8. In near-neutral hydrothermal waters the oxidation of S²⁻ and the interaction of S²⁻ and S⁰ resulting in the formation of S_x²⁻ are considered important. At lower pH values the reactions seemed to proceed relatively rapidly to SO₄²⁻ and the sulfur chemistry of acid-sulfate pools was dominated by SO₄²⁻, which corresponded to >99% of S_TOT. The results suggest that the aqueous speciation of sulfur in natural hydrothermal waters is dynamic and both kinetically and source-controlled and cannot be estimated from thermodynamic speciation calculations.     

Estimating specific surface area of fine stream bed sediments from geochemistry

Specific surface area (SSA) of headwater stream bed sediments is a fundamental property which determines the nature of sediment surface reactions and influences ecosystem-level, biological processes. Measurements of SSA – commonly undertaken by BET nitrogen adsorption – are relatively costly in terms of instrumentation and operator time. A novel approach is presented for estimating fine (<150 μm) stream bed sediment SSA from their geochemistry – after removal of organic matter – for agricultural headwater catchments across 15,400 km² of central England, UK. From a regional set of 1972 stream bed sediment sites with common characteristics for which geochemical data were available, 60 samples were selected – based on maximising their variation in Al concentrations – and their BET SSA measured by N₂ adsorption. After careful selection of potential regression predictors following a principal component analysis and removal of a subset of samples with the largest Mo concentrations (>2.5 mg kg⁻¹), four elements were identified as significant predictors of SSA (ordered by decreasing predictive power): V > Ca > Al > Rb. The optimum model from these four elements accounted for 73% of the variation in bed sediment SSA (range 6–46 m² g⁻¹) with a root mean squared error of prediction – based on leave-one-out cross-validation – of 6.3 m² g⁻¹. It is believed that V is the most significant predictor because its concentration is strongly correlated both with the quantity of Fe-oxides and clay minerals in the stream bed sediments, which dominate sediment SSA. Sample heterogeneity in SSA – based on triplicate measurements of sub-samples – was a substantial source of variation (standard error = 2.2 m² g⁻¹) which cannot be accounted for in the regression model.     

Phosphorus speciation and availability in intertidal sediments of the Yangtze Estuary,China

In order to better understand P cycling and bioavailability in the intertidal system of the Yangtze Estuary, both surface (0–5 cm) and core (30 cm long) sediments were collected and sequentially extracted to analyze the solid-phase reservoirs of sedimentary P: loosely sorbed P; Fe-bound P; authigenic P; detrital P; and organic P. The total sedimentary P in surface and core sediments ranged from 14.58–36.81 μmol g⁻¹ and 17.11–24.55 μmol g⁻¹, respectively, and was dominated by inorganic P. The average percentage of each fraction of P in surface sediments followed the sequence: detrital P (54.9%) > Fe-bound P (23.7%) > organic P (14.3%) > authigenic P (6.3%) > loosely sorbed P (0.8%), whereas in core sediments it followed the sequence: detrital P (61.7%) > Fe-bound P (17.0%) > authigenic P (13.1%) > organic P (7.5%) > loosely sorbed P (0.7%). Post-depositional reorganization of P was observed in both surface and core sediments, converting organic P and Fe-bound P to authigenic P. The accumulation rates and burial efficiencies of the total P in the intertidal area ranged from 118.70–904.98 μmol cm⁻² a⁻¹ and 80.29–88.11%, respectively. High burial efficiency of the total P is likely related to the high percentage of detrital P and the high sediment accumulation rate. In addition, the bioavailable P represented a significant proportion of the sedimentary P pool, which on average accounted for 37.4% and 25.1% of the total P in surface and core sediments, respectively. This result indicates that the tidal sediment is a potential internal source of P for this P-limiting estuarine ecosystem.     

Particulate-associated potentially harmful elements in urban road dusts in Xi’an,China

Sixty five urban road dust samples were collected from different land use areas of ∼240 km² in Xi’an, China. The concentrations of Ag, As, Cr, Cu, Hg, Pb, Sb and Zn were determined to investigate potentially harmful element (PHE) contamination, distribution and possible sources. In addition, the concentrations in different size fractions were measured to assess their potential impact on human health. The highest concentrations were found in the fraction with particle diameters between 80 μm and 101 μm, the finest particles (<63 μm) were not the most important carriers for Ag, As, Cd, Cr, Cu, Hg, Pb and Zn. The percentages of these elements in particles with diameters less than 63 μm (PM₆₃) and less than 101 μm (PM₁₀₁) were in the range of 7–15%, and 30–55%, respectively. Three main factors influencing element distributions have been identified: (a) industrial activities; (b) prior agricultural land use; and (c) other activities commonly found in urban areas, such as traffic, coal combustion, waste dumping, and building construction/renovation. The highest concentrations were found in industrial areas for As (20 mg kg⁻¹), Cr (853 mg kg⁻¹), Cu (1071 mg kg⁻¹), Pb (3060 mg kg⁻¹) and Zn (2112 mg kg⁻¹), and in previous agricultural areas for Ag and Hg, indicating significant contributions from industrial activities and prior agricultural activities.     

Exploring sustainability of aquifers based on predictive modeling of sorption characteristics of arsenic enriched Holocene sediments in Bangladesh

The importance of accessing safe aquifers in areas with high As is being increasingly recognized. The present study aims to investigate the sorption and mobility of As at the sediment-groundwater interface to identify a likely safe aquifer in the Holocene deposit in southwestern Bangladesh. The upper, shallow aquifer at around 18 m depth, which is composed mainly of very fine, grey, reduced sand and contains 24.3 μg/g As, was found to produce highly enriched groundwater (190 μg/L As). In contrast, deeper sediments are composed of partly oxidized, brownish, medium sand with natural adsorbents like Fe- and Al-oxides; they contain 0.76 μg/g As and impart low As concentrations to the water (4 μg/L). These observations were supported by spectroscopic studies with SEM, TEM, XRD and XRF, and by adsorption, leaching, column tests and sequential extraction. A relatively high in-situ dissolution rate (R_r) of 1.42 × 10⁻¹⁶ mol/m²/s was derived for the shallower aquifer from the inverse mass-balance model. The high R_r may enhance As release processes in the upper sediment. The field-based reaction rate (K_r) was extrapolated to be roughly 1.23 × 10⁻¹³ s⁻¹ and 6.24 × 10⁻¹⁴ s⁻¹ for the shallower and deeper aquifer, respectively, from the laboratory-obtained adsorption/desorption data. This implies that As is more reactive in the shallower aquifer. The partition coefficient for the distribution of As at the sediment-water interface (K_d-As) was found to range from 5 to 235 L/kg based on in-situ, batch adsorption, and flow-through column techniques. Additionally, a parametric equation for K_d-As (R² = 0.67) was obtained from the groundwater pH and the logarithm of the leachable Fe and Al concentrations in sediment. A one-dimensional finite-difference numerical model incorporating K_d and K_r showed that the shallow, leached As can be immobilized and prevented from reaching the deeper aquifer (∼150 m) after 100 year by a natural filter of oxidizing sand and adsorbent minerals like Fe and Al oxides; in this scenario, 99% of the As in groundwater is reduced. The deeper aquifer appears to be an adequate source of sustainable, safe water.     

Origin of lead in the Gulf of California Ecoregion using stable isotope analysis

The magnitude and sources of lead (Pb) pollution in the Gulf of California Ecoregion (GCE) in northwest Mexico were evaluated using various samples collected from urban and rural areas around two typical subtropical coastal ecosystems. Lead concentrations and isotopic compositions (²⁰⁶Pb/²⁰⁷Pb, ²⁰⁸Pb/²⁰⁷Pb, ²⁰⁶Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb) were measured using high resolution inductively-coupled plasma mass spectrometry (HR-ICP-MS) and thermal ionization mass spectrometry (TIMS). Urban street dust (157 ± 10.1 μg g^− 1) was heavily enriched with Pb, compared to the Pb enrichment of agricultural soils (29.0 ± 16.0 μg g^− 1) and surface estuary sediments (35.6 ± 15.4 μg g^− 1), all of which contained higher Pb concentrations than found in the natural bedrock (16.0 ± 5.0 μg g^− 1). Pb concentrations in SPM (> 95% of total Pb) were significantly higher in sewage effluent (132 ± 49.9 μg g^− 1) than in agricultural effluents (29.3 ± 5.9 μg g^− 1), and river runoff (7.3 ± 4.2 μg g^− 1). SPM in estuary water column averaged 68.3 ± 48.0 μg g⁻¹. The isotopic composition of Pb (²⁰⁶Pb/²⁰⁷Pb, ²⁰⁸Pb/²⁰⁷Pb) in rural samples of aerosols (1.181 ± 0.001, 2.444 ± 0.003) and soil runoff (1.181 ± 0.003, 2.441 ± 0.004) was comparable to that of natural Pb-bearing bedrock (1.188 ± 0.005, 2.455 ± 0.008); while urban samples of aerosols, street dust, and sewage (1.190–1.207, 2.452–2.467) showed a significant contribution from automotive emissions from past leaded gasoline combustion (1.201 ± 0.006, 2.475 ± 0.005). The absence of lead from fertilizer (1.387 ± 0.008, 2.892 ± 0.005) suggests that this mixture is not representative of the GCE. A mixing model revealed that the Pb content in the environmental samples is predominantly derived from natural weathering and the past leaded gasoline combustion with the later influence of inputs from a more radiogenic source related with anthropogenic lead of North American origin (1.21 ± 0.02; 2.455 ± 0.02).     

Dissolved metals and associated constituents in abandoned coal-mine discharges,Pennsylvania, USA. Part 1: Constituent quantities and correlations

Complete hydrochemical data are rarely reported for coal-mine discharges (CMD). This report summarizes major and trace-element concentrations and loadings for CMD at 140 abandoned mines in the Anthracite and Bituminous Coalfields of Pennsylvania. Clean-sampling and low-level analytical methods were used in 1999 to collect data that could be useful to determine potential environmental effects, remediation strategies, and quantities of valuable constituents. A subset of 10 sites was resampled in 2003 to analyze both the CMD and associated ochreous precipitates; the hydrochemical data were similar in 2003 and 1999. In 1999, the flow at the 140 CMD sites ranged from 0.028 to 2210 L s⁻¹, with a median of 18.4 L s⁻¹. The pH ranged from 2.7 to 7.3; concentrations (range in mg/L) of dissolved (0.45-μm pore-size filter) SO₄ (34–2000), Fe (0.046–512), Mn (0.019–74), and Al (0.007–108) varied widely. Predominant metalloid elements were Si (2.7–31.3 mg L⁻¹), B (<1–260 μg L⁻¹), Ge (<0.01–0.57 μg L⁻¹), and As (<0.03–64 μg L⁻¹). The most abundant trace metals, in order of median concentrations (range in μg/L), were Zn (0.6–10,000), Ni (2.6–3200), Co (0.27–3100), Ti (0.65–28), Cu (0.4–190), Cr (<0.5–72), Pb (<0.05–11) and Cd (<0.01–16). Gold was detected at concentrations greater than 0.0005 μg L⁻¹ in 97% of the samples, with a maximum of 0.0175 μg L⁻¹. No samples had detectable concentrations of Hg, Os or Pt, and less than half of the samples had detectable Pd, Ag, Ru, Ta, Nb, Re or Sn. Predominant rare-earth elements, in order of median concentrations (range in μg/L), were Y (0.11–530), Ce (0.01–370), Sc (1.0–36), Nd (0.006–260), La (0.005–140), Gd (0.005–110), Dy (0.002–99) and Sm (<0.005–79). Although dissolved Fe was not correlated with pH, concentrations of Al, Mn, most trace metals, and rare earths were negatively correlated with pH, consistent with solubility or sorption controls. In contrast, As was positively correlated with pH.     

The reactivity of iron oxides towards reductive dissolution with ascorbic acid in a shallow sandy aquifer (Rømø, Denmark)

The pool of iron oxides, available in sediments for reductive dissolution, is usually estimated by wet chemical extraction methods. Such methods are basically empirically defined and calibrated against various synthetic iron oxides. However, in natural sediments, iron oxides are present as part of a complex mixture of iron oxides with variable crystallinity, clays and organics etc. Such a mixture is more accurately described by a reactive continuum covering a range from highly reactive iron oxides to non-reactive iron oxide. The reactivity of the pool of iron oxides in sediment can be determined by reductive dissolution in 10 mM ascorbic acid at pH 3. Parallel dissolution experiments in HCl at pH 3 reveal the release of Fe(II) by proton assisted dissolution. The difference in Fe(II)-release between the two experiments is attributed to reductive dissolution of iron oxides and can be quantified using the rate equation J/m₀ = k′(m/m₀)^γ, where J is the overall rate of dissolution (mol s⁻¹), m₀ the initial amount of iron oxide, k′ a rate constant (s⁻¹), m/m₀ the proportion of undissolved mineral and γ a parameter describing the change in reaction rate over time. In the Rømø aquifer, Denmark, the reduction of iron oxides is an important electron accepting process for organic matter degradation and is reflected by the steep increase in aqueous Fe²⁺ over depth. Sediment from the Rømø aquifer was used for reductive dissolution experiments with ascorbic acid. The rate parameters describing the reactivity of iron oxides in the sediment are in the range k′ = 7·10⁻⁶ to 1·10⁻³ s⁻¹ and γ = 1 to 2.4. These values are intermediate between a synthetic 2-line ferrihydrite and a goethite. The rate constant increases by two orders of magnitude over depth suggesting an increase in iron oxide reactivity with depth. This increase was not captured by traditional oxalate and dithionite extractions.     

Gold solubility in oxidized and reduced, water-saturated mafic melt

We have performed experiments to evaluate Au solubility in natural, water-saturated basaltic melts as a function of oxygen fugacity. Experiments were carried out at 1000 °C and 200 MPa, and oxygen fugacity was controlled at the fayalite-magnetite-quartz (FMQ) oxygen fugacity buffer and FMQ + 4. All experiments were saturated with a metal-chloride aqueous solution loaded initially as a 10 wt% NaCl eq. fluid. The stable phase assemblage at FMQ consists of basalt melt, olivine, clinopyroxene, a single-phase aqueous fluid, and metallic Au. The stable phase assemblage at FMQ + 4 consists of basalt melt, clinopyroxene, magnetite-spinel solid solution, a single-phase aqueous fluid, and metallic Au. Silicate glasses (i.e., quenched melt) and their contained crystalline material were analyzed by using both electron probe microanalysis (EPMA) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Measured Au concentrations in the quenched melt range from 4.8 μg g⁻¹ to 0.64 μg g⁻¹ at FMQ + 4, and 0.54 μg g⁻¹ to 0.1 μg g⁻¹ at FMQ. The measured solubility of Au in olivine and clinopyroxene was consistently below the LA-ICP-MS limit of detection (i.e., 0.1 μg g⁻¹). These melt solubility data place important limitations on the dissolved Au content of water-saturated, Cl- and S-bearing basaltic liquids at geologically relevant fO₂ values. The new data are compared to published, experimentally-determined values for Au solubility in dry and hydrous silicate liquids spanning the compositional range from basalt to rhyolite, and the effects of melt composition, oxygen fugacity, pressure and temperature are discussed.     

Hydration of rhyolitic glass during weathering as characterized by IR microspectroscopy

The mechanism and rate of hydration of rhyolitic glass during weathering were studied. Doubly polished thin sections of two rhyolites with different duration of weathering (Ohsawa lava: 26,000 yr, Awanomikoto lava: 52,000 yr) were prepared. Optical microscope observation showed that altered layers had developed along the glass surfaces. IR spectral line profile analysis was conducted on the glass sections from the surface to the interior for a length of 250 μm and the contents of molecular H₂O (H₂O_m), OH species (OH) and total water (H₂O_t) were determined. The diffusion profile of H₂O_m in Ohsawa lava extends beyond the layer observed by optical microscope. The content of H₂O_m in the hydrated region is much higher than that of OH species. Thus, the reaction from H₂O_m to OH appears to be little and H₂O_m is the dominant water species moving into the glass during weathering. Based on the concentration profiles, the diffusion coefficients of H₂O_m(D_H2Om) and H₂O_t(D_H2Ot) were determined to be 2.8 × 10⁻¹⁰ and 3.4 × 10⁻¹⁰ μm² s⁻¹ for Ohsawa lava, and 5.2 × 10⁻¹¹ and 4.1 × 10⁻¹¹ μm² s⁻¹ for Awanomikoto lava, respectively. The obtained D_H2Om during weathering are more than 2-3 orders of magnitude larger than the diffusion coefficient at ∼20 °C that is extrapolated from the diffusivity data for >400 °C. This might suggest that the mechanism of water transport is different at weathering conditions and >400 °C.     

Benthic fluxes of mercury species in a lagoon environment (Grado Lagoon,Northern Adriatic Sea,Italy)

The role of the major biogeochemical processes in Hg cycling at the sediment–water interface was investigated in the Grado Lagoon (Northern Adriatic Sea). This wetland system has been extensively contaminated from the Idrija Hg Mine (Slovenia) through the Isonzo River suspended load carried by tidal fluxes. Three approaches were used to study the sediment–water exchange of total Hg (THg), methylmercury (MeHg), reactive Hg (RHg) and dissolved gaseous Hg (DGHg): (1) estimation of diffusive fluxes from porewater and overlying water concentrations, (2) measurements of benthic fluxes using a deployed light benthic chamber in situ and (3) measurements of benthic fluxes during oxic–anoxic transition with a laboratory incubation experiment. The THg solid phase, ranging between 9.5 and 14.4 μg g⁻¹, showed slight variability with depth and time. Conversely, MeHg contents were highest (up to 21.9 ng g⁻¹) at the surface; they tended to decrease to nearly zero concentration with depth, thus suggesting that MeHg production and accumulation occur predominantly just below the sediment–water interface. Porewater MeHg concentrations (0.9–7.9 ng L⁻¹, 0.15–15% of THg) varied seasonally; higher contents were observed in the warmer period. The MeHg diffusive fluxes (up to 17 ng m⁻² day⁻¹) were similar to those in the nearby Gulf of Trieste [Covelli, S., Horvat, M., Faganeli, J., Brambati, A., 1999. Porewater distribution and benthic flux of mercury and methylmercury in the Gulf of Trieste (Northern Adriatic Sea). Estuar. Coast. Shelf Sci. 48, 415–428], although the lagoon sediments contained four-fold higher THg concentrations. Conversely, the THg diffusive fluxes in the lagoon (up to 110 ng m⁻² day⁻¹) were one- to two-fold higher than those previously estimated for the Gulf of Trieste. The diurnal MeHg benthic fluxes were highest in summer at both sites (41,000 and 33,000 ng m⁻² day⁻¹ at the fishfarm and in the open lagoon, respectively), thus indicating the influence of temperature on microbial processes. The diurnal variations of dissolved THg and especially MeHg were positively correlated with O₂ and inversely with DIC, suggesting an important influence of benthic photosynthetic activities on lagoon benthic Hg cycling, possibly through the production of organic matter promptly available for methylation. The results from the dark chamber incubated in the laboratory showed that the regeneration of dissolved THg was slightly affected by the oxic–anoxic transition. Conversely, the benthic flux of MeHg was up to 15-fold higher in sediments overlain by O₂ depleted waters. In the anoxic phase, the MeHg fluxes proceeded in parallel with Fe fluxes and the methylated form reached approximately 100% of dissolved THg. The MeHg is mostly released into overlying water (mean recycling efficiency of 89%) until the occurrence of sulphide inhibition, due to scavenging of the available Hg substrate for methylation. The results suggest that sediments in the Grado Lagoon, especially during anoxic events, should be considered as a primary source of MeHg for the water column.     

Evidence of microbially mediated arsenic mobilization from sediments of the Aquia aquifer, Maryland, USA

Sediments from the Aquia aquifer in coastal Maryland were collected as part of a larger study of As in the Aquia groundwater flow system where As concentration are reported to reach levels as high as 1072 nmol kg⁻¹, (i.e., ∼80 μg/L). To test whether As release is microbially mediated by reductive dissolution of Fe(III) oxides/oxyhydroxides within the aquifer sediments, the Aquia aquifer sediment samples were employed in a series of microcosm experiments. The microcosm experiments consisted of sterilized serum bottles prepared with aquifer sediments and sterilized (i.e., autoclaved), artificial groundwater using four experimental conditions and one control condition. The four experimental conditions included the following scenarios: (1) aerobic; (2) anaerobic; (3) anaerobic + acetate; and (4) anaerobic + acetate + AQDS (anthraquinone-2,6-disulfonic acid). AQDS acts as an electron shuttle. The control condition contained sterilized aquifer sediments kept under anaerobic conditions with an addition of AQDS. Over the course of the 27 day microcosm experiments, dissolved As in the unamended (aerobic and anaerobic) microcosms remained constant at around ∼28 nmol kg⁻¹ (2 μg/L). With the addition of acetate, the amount of As released to the solution approximately doubled reaching ∼51 nmol kg⁻¹ (3.8 μg/L). For microcosm experiments amended with acetate and AQDS, the dissolved As concentrations exceeded 75 nmol kg⁻¹ (5.6 μg/L). The As concentrations in the acetate and acetate + AQDS amended microcosms are of similar orders of magnitude to As concentrations in groundwaters from the aquifer sediment sampling site (127-170 nmol kg⁻¹). Arsenic concentrations in the sterilized control experiments were generally less than 15 nmol kg⁻¹ (1.1 μg/L), which is interpreted to be the amount of As released from Aquia aquifer sediments owing to abiotic, surface exchange processes. Iron concentrations released to solution in each of the microcosm experiments were higher and more variable than the As concentrations, but generally exhibited similar trends to the As concentrations. Specifically, the acetate and acetate + AQDS amended microcosm typically exhibited the highest Fe concentrations (up to 1725 and 6566 nmol kg⁻¹, respectively). The increase in both As and Fe in the artificial groundwater solutions in these amended microcosm experiments strongly suggests that microbes within the Aquia aquifer sediments mobilize As from the sediment substrate to the groundwaters via Fe(III) reduction.     

Groundwater flow in an arsenic-contaminated aquifer,Mekong Delta,Cambodia

To advance understanding of hydrological influences on As concentrations within groundwaters of Southeast Asia, the flow system of an As-rich aquifer on the Mekong Delta in Cambodia where flow patterns have not been disturbed by irrigation well pumping was examined. Monitoring of water levels in a network of installed wells, extending over a 50 km² area, indicates that groundwater flow is dominated by seasonally-variable gradients developed between the river and the inland wetland basins. While the gradient inverts annually, net groundwater flow is from the wetlands to the river. Hydraulic parameters of the aquifer (K ≈ 10⁻⁴ ms⁻¹) and overlying clay aquitard (K ≈ 10⁻⁸ ms⁻¹) were determined using grain size, permeameter and slug test analyses; when coupled with observed gradients, they indicate a net groundwater flow velocity of 0.04–0.4 ma⁻¹ downward through the clay and 1–13 ma⁻¹ horizontally within the sand aquifer, producing aquifer residence times on the order 100–1000 a. The results of numerical modeling support this conceptual model of the flow system and, when integrated with observed spatial trends in dissolved As concentrations, reveal that the shallow sediments (upper 2–10 m of fine-grained material) are an important source of As to the underlying aquifer.     

Spatial distribution and source diagnosis of polycyclic aromatic hydrocarbons in soils from Chengdu Economic Region,Sichuan Province,western China

Surface soils from the Chengdu Economic Region (CER) were analyzed for sixteen United States Environment Protection Agency priority polycyclic aromatic hydrocarbons (PAHs) to study the spatial distribution and to identify the sources of PAHs. Relatively high concentrations (more than 1500 ngg^− 1) of high molecular weight PAHs were found in Chengdu Plain, in the middle of CER, while high concentrations (more than 500 ng g^− 1) of low molecular weight PAHs were detected in the surrounding mountains. The concentrations of ∑₁₆-PAHs in topsoil samples from CER (12.52–75,431.47 ngg^− 1, average value was 3233.92 ngg^− 1) were higher than that from the southern China (21.91–3077 ngg^− 1, average value was less than 500 ngg^− 1), and they were comparable to concentrations in soils from the northern China (366–254,080 ngg^− 1, mean value was more than 3000 ngg^− 1). The concentrations from CER were also much higher than the concentrations of some world clean regions such as Antarctic (34.9–171 ngg^− 1), European high mountains (9–11,000 ngg^− 1, mean value was 158 ngg^− 1) and some Europe residential (736 ngg^− 1) and arable soils (60–145 ngg^− 1, mean value was 66 ngg^− 1). The ratio of tracer compounds (BaA/(BaA + Chr), Flo/(Flo + Pyr), and IcdP/(IcdP + BghiP)) indicated that the high concentrations of PAHs in soils were mainly derived from fossil fuels combustion in mountain region and from the incomplete combustion of petroleum in developed plain area (such as Chengdu and Deyang). From the above distribution characteristics and ratios of tracer compounds, we inferred the reasons for the distribution pattern of PAHs in CER were the domestic heating, emissions, and the physicochemical properties of PAHs.     

Carbon and oxygen stable isotope compositions of late Pleistocene mammal teeth from dolines of Ajoie (Northwestern Switzerland)

Fossils of megaherbivores from eight late Pleistocene ¹⁴C- and OSL-dated doline infillings of Ajoie (NW Switzerland) were discovered along the Transjurane highway in the Swiss Jura. Carbon and oxygen analyses of enamel were performed on forty-six teeth of large mammals (Equus germanicus, Mammuthus primigenius, Coelodonta antiquitatis, and Bison priscus), coming from one doline in Boncourt (~ 80 ka, marine oxygen isotope stage MIS5a) and seven in Courtedoux (51–27 ka, late MIS3), in order to reconstruct the paleoclimatic and paleoenvironmental conditions of the region. Similar enamel δ¹³C values for both periods, ranging from − 14.5 to − 9.2‰, indicate that the megaherbivores lived in a C₃ plant-dominated environment. Enamel δ¹⁸O_PO4 values range from 10.9 to 16.3‰ with a mean of 13.5 ± 1.0‰ (n = 46). Mean air temperatures (MATs) were inferred using species-specific δ¹⁸O_PO4–δ¹⁸O_H2O-calibrations for modern mammals and a present-day precipitation δ¹⁸O_H2O-MAT relation for Switzerland. Similar average MATs of 6.6 ± 3.6°C for the deposits dated to ~ 80 ka and 6.5 ± 3.3°C for those dated to the interval 51–27 ka were estimated. This suggests that these mammals in the Ajoie area lived in mild periods of the late Pleistocene with MATs only about 2.5°C lower than modern-day temperatures.     

Complexation of cadmium to sulfur and oxygen functional groups in an organic soil

Cadmium (Cd) is a toxic trace element and due to human activities soils and waters are contaminated by Cd both on a local and global scale. It is widely accepted that chemical interactions with functional groups of natural organic matter (NOM) is vital for the bioavailability and mobility of trace elements. In this study the binding strength of cadmium (Cd) to soil organic matter (SOM) was determined in an organic (49% organic C) soil as a function of reaction time, pH and Cd concentration. In experiments conducted at native Cd concentrations in soil (0.23 μg g⁻¹ dry soil), halides (Cl, Br) were used as competing ligands to functional groups in SOM. The concentration of Cd in the aqueous phase was determined by isotope-dilution (ID) inductively-coupled-plasma-mass-spectrometry (ICP-MS), and the activity of Cd²⁺ was calculated from the well-established Cd-halide constants. At higher Cd loading (500-54,000 μg g⁻¹), the Cd²⁺ activity was directly determined by an ion-selective electrode (ISE). On the basis of results from extended X-ray absorption fine structure (EXAFS) spectroscopy, a model with one thiolate group (RS⁻) was used to describe the complexation (Cd²⁺ + RS⁻ ? CdSR⁺; log K_CdSR) at native Cd concentrations. The concentration of thiols (RSH; 0.047 mol kg⁻¹ C) was independently determined by X-ray absorption near-edge structure (XANES) spectroscopy. Log K_CdSR values of 11.2-11.6 (pK_a for RSH = 9.96), determined in the pH range 3.1-4.6, compare favorably with stability constants for the association between Cd and well-defined thiolates like glutathione. In the concentration range 500-54,000 μg Cd g⁻¹, a model consisting of one thiolate and one carboxylate (RCOO⁻) gave the best fit to data, indicating an increasing role for RCOOH groups as RSH groups become saturated. The determined log K_CdOOCR of 3.2 (Cd²⁺ +  RCOO⁻ ? CdOOCR⁺; log K_CdOOCR; pK_a for RCOOH = 4.5) is in accordance with stability constants determined for the association between Cd and well-defined carboxylates. Given a concentration of reduced sulfur groups of 0.2% or higher in NOM, we conclude that the complexation to organic RSH groups may control the speciation of Cd in soils, and most likely also in surface waters, with a total concentration less than 5 mg Cd g⁻¹ organic C.     

Changes in fish mercury concentrations over 20 years in an acidified lake subject to experimental liming

Lake Iso Valkjärvi (southern Finland, Europe) was divided in two with a plastic curtain in 1991. One half was neutralized with CaCO₃, and the other acted as a control. Mercury concentrations of perch (Perca fluviatilis) and northern pike (Esox lucius) in the limed and control side of the lake were studied both before and after the treatment. Average Hg concentrations of perch and pike were 0.40 and 1.2 μg g⁻¹ (ww) in the early 1980s and 0.25 and 0.72 μg g⁻¹ (ww) a decade later at the time of liming. Ten years after the liming the Hg concentrations of perch in the limed and control sides of the lake were 0.21 and 0.28 μg g⁻¹ (ww) and those of pike were 0.69 and 0.43 μg g⁻¹ (ww), respectively. Nitrogen isotope ratios (δ¹⁵N) for perch in the sampling period 2002–2004 showed wide variation suggesting variable trophic positions for individual fish. Pike formed two groups according to their δ¹⁵N-values, suggesting that zoobenthos dominated the diet of pike around 20 cm in length and fish that of the larger pikes. Because the δ¹⁵N-values of fish were at similar levels in the limed and control sides of L. Iso Valkjärvi, differences in food web structure cannot account for the different fish Hg concentrations. A more likely explanation is water quality induced differences in the dynamics and bioavailability of Hg, leading to decreased formation of methyl Hg.