X-ray absorption spectroscopy study of Cu and Zn adsorption complexes at the calcite surface: Implications for site-specific metal incorporation preferences during calcite crystal growth

We report results from in situ extended X-ray absorption fine structure (EXAFS) spectroscopy studies of Cu(II) and Zn(II) complexes forming at the calcite surface following adsorption from preequilibrated calcite-saturated solutions. Both Cu(II) and Zn(II) coordinate at Ca sites on the calcite surface, forming mononuclear inner-sphere adsorption complexes. The Zn adsorption complexes are in tetrahedral coordination with first-shell O neighbors with R_Zn-O = 1.95 Å, and the Cu complexes are Jahn-Teller distorted, with equatorial R_Cu-O = 1.95 Å. Results from EXAFS data of dilute Cu- and Zn-calcite solid solutions confirm substitution of these metals in the Ca site of the calcite structure as octahedral complexes during coprecipitation. X-ray fluorescence microanalyses of calcite (101?4) hillocks grown in coprecipitation experiments show that divalent Cu and Zn, which have ionic radii smaller than Ca, are preferentially incorporated into the parallel arrays of <4?41>₊ steps that define one pair of symmetrically equivalent vicinal faces on polygonized growth spirals. In contrast, other divalent metals with sixfold ionic radii smaller than Ca (Co, Cd, Mn, Mg) have been shown to be preferentially incorporated into <4?41>₋ growth steps, which define the second pair of vicinal faces on the growth spirals, but which are symmetrically nonequivalent to the steps on the first pair. The distortion from octahedral symmetry observed for the Cu and Zn adsorption complexes likely plays a key role in the observed preference of Cu and Zn for incorporation into the <4?41>₊ steps.     

Polarized XANES and EXAFS spectroscopic investigation into copper(II) complexes on vermiculite

Interaction of heavy metals with clay minerals can dominate solid-solution reactions in soil, controlling the fate of the metals in the environment. In this study we used powdered and polarized extended X-ray absorption fine structure (EXAFS) spectroscopy and X-ray absorption near edge spectroscopy (XANES) to investigate Cu sorbed on Llano vermiculite and compare the results to reported Cu sorption mechanism on Wyoming (WY) smectite and reduced South African (SA) vermiculite. Analysis of the Cu K-edge spectra revealed that Cu sorbed on Llano vermiculite at high ionic strength (I) has the greatest degree of covalent bond character, followed by Cu sorbed on montmorillonite at high I, and Cu sorbed on reduced SA vermiculite at high I. Cu sorbed on clay minerals at low I has the least covalent character. EXAFS data from Cu sorbed Ca- and K-equilibrated Llano vermiculites showed the presence of a second-shell Al, Si, or Mg backscatterer at 3.02 Å. This distance is consistent with Cu sorbing via a corner-sharing monodentate or bidentate bond. Polarized XANES and EXAFS results revealed that the angle between the Cu atom and the mineral sorption sites is 68° with respect to the [001] direction. From the bond angle and the persistence of the second-shell backscatterer when the interlayer is collapsed (K-equilibration), we conclude that Cu adsorption on the Llano vermiculite is not occurring in the interlayer but rather Cu is adsorbing onto the edges of the vermiculite. Results from this research provide evidence that Cu forms inner-sphere and outer-sphere complexes on clay minerals, and does not form the vast multinuclear surface precipitates that have been observed for Co, Zn, and Ni.     

Surface complexation and precipitate geometry for aqueous Zn(II) sorption on ferrihydrite: II. XANES analysis and simulation

X-ray absorption near-edge spectroscopy (XANES) analysis of sorption complexes has the advantages of high sensitivity (10- to 20-fold greater than extended X-ray absorption fine structure [EXAFS] analysis) and relative ease and speed of data collection (because of the short k-space range). It is thus a potentially powerful tool for characterization of environmentally significant surface complexes and precipitates at very low surface coverages. However, quantitative analysis has been limited largely to “fingerprint” comparison with model spectra because of the difficulty of obtaining accurate multiple-scattering amplitudes for small clusters with high confidence.In the present work, calculations of the XANES for 50- to 200-atom clusters of structure from Zn model compounds using the full multiple-scattering code Feff 8.0 accurately replicate experimental spectra and display features characteristic of specific first-neighbor anion coordination geometry and second-neighbor cation geometry and number. Analogous calculations of the XANES for small molecular clusters indicative of precipitation and sorption geometries for aqueous Zn on ferrihydrite, and suggested by EXAFS analysis, are in good agreement with observed spectral trends with sample composition, with Zn-oxygen coordination and with changes in second-neighbor cation coordination as a function of sorption coverage. Empirical analysis of experimental XANES features further verifies the validity of the calculations. The findings agree well with a complete EXAFS analysis previously reported for the same sample set, namely, that octahedrally coordinated aqueous Zn²⁺ species sorb as a tetrahedral complex on ferrihydrite with varying local geometry depending on sorption density. At significantly higher densities but below those at which Zn hydroxide is expected to precipitate, a mainly octahedral coordinated Zn²⁺ precipitate is observed. An analysis of the multiple scattering paths contributing to the XANES demonstrates the importance of scattering paths involving the anion sublattice. We also describe the specific advantages of complementary quantitative XANES and EXAFS analysis and estimate limits on the extent of structural information obtainable from XANES analysis.     

Arsenate uptake by calcite: Macroscopic and spectroscopic characterization of adsorption and incorporation mechanisms

Batch uptake experiments and X-ray element mapping and spectroscopic techniques were used to investigate As(V) (arsenate) uptake mechanisms by calcite, including adsorption and coprecipitation. Batch sorption experiments in calcite-equilibrated suspensions (pH 8.3; PCO₂ = 10^−3.5 atm) reveal rapid initial sorption to calcite, with sorption rate gradually decreasing with time as available sorption sites decrease. An As(V)-calcite sorption isotherm determined after 24 h equilibration exhibits Langmuir-like behavior up to As concentrations of 300 μM. Maximum distribution coefficient values (K_d), derived from a best fit to a Langmuir model, are ∼190 L kg⁻¹.Calcite single crystals grown in the presence of As(V) show well-developed rhombohedral morphology with characteristic growth hillocks on surfaces at low As(V) concentrations (?5 μM), but habit modification is evident at As(V) concentrations ?30 μM in the form of macrostep development preferentially on the − vicinal surfaces of growth hillocks. Micro-X-ray fluorescence element mapping of surfaces shows preferential incorporation of As in the − vicinal faces relative to + vicinals. EXAFS fit results for both adsorption and coprecipitation samples confirm that As occurs in the 5+ oxidation state in tetrahedral coordination with oxygen, i.e., as arsenate. For adsorption samples, As(V) forms inner-sphere surface complexes via corner-sharing with Ca octahedra. As(V) coprecipitated with calcite substitutes in carbonate sites but with As off-centered, as indicated by two Ca shells, and with likely disruption of local structure. The results indicate that As(V) interacts strongly with the calcite surface, similar to often-cited analog phosphate, and uptake can occur via both adsorption and coprecipitation reactions. Therefore, calcite may be effective for partial removal of dissolved arsenate from aquatic and soil systems.     

The influence of pH on the kinetics, reversibility and mechanisms of Pb(II) sorption at the calcite-water interface

Pb(II) sorption experiments with calcite powders were conducted in suspensions equilibrated at atmospheric PCO_2(g) and ambient temperature at pH 7.3, 8.2 and 9.4. Pb fractional sorption was low at pH 7.3 and 9.4 relative to pH 8.2, and correlated well with PbCO₃⁰_(aq) speciation. Desorption experiments conducted for initial sorption times ranging from 0.5 h to 12 d reveal an almost completely reversible process at pH 8.2, attributed to the dominance of an adsorption mechanism, with slight and pronounced irreversibility at pH 7.3 and 9.4 respectively. Similarities in X-ray absorption near edge spectra (XANES) for 24 h and 12 d pH 7.3 and 9.4 sorption samples indicate no effect of initial sorption time. Results from linear combination (LC) fits of XANES spectra for samples sorbed at pH 9.4 confirm ∼75% adsorbed and ∼25% coprecipitated components. The coprecipitated fraction was attributed to the non-exchangeable metal observed in desorption experiments. At pH 7.3, ∼95% adsorbed and ∼5% coprecipitated components were obtained. A comparison of results from desorption experiments and LC-XANES alludes to an irreversibly bound adsorbed component for the pH 9.4 12 d sorption sample. Extended X-ray absorption fine structure spectroscopy (EXAFS) analysis of pH 7.3 and 9.4 12 d sorption samples confirms the presence of both adsorbed and coprecipitated metal. At pH 7.3 a first-shell Pb-O bond length of 2.38 Å is intermediate between that of adsorbed (2.34 Å) and coprecipitated (2.51 Å) Pb. At pH 9.4, two first-shell Pb-O distances at 2.35 Å and 2.51 Å were obtained, indicative of the occurrence of both adsorption and coprecipitation and a larger coprecipitated fraction relative to that at pH 7.3, consistent with LC-XANES results. We propose that the disparity in the fraction of coprecipitated metal with pH may be linked to the ability of sorbed Pb to inhibit near-surface dynamic exchange of Ca and CO₃ species, which dictates step advance and retreat. Less effective inhibition of step motion at pH 9.4, due to lower fractional sorption, combined with highest rates of dynamic exchange results in a significant fraction of coprecipitated Pb at this pH. At low pH, though fractional sorption is also low, lower rates of exchange prohibit significant coprecipitation. At pH 8.2, effective inhibition of surface processes due to higher fractional sorption and lower rates of exchange compared to pH 7.3 and 9.4 preclude detectable coprecipitation. Other factors such as changes in surface speciation and solubility of the Pb-Ca solid solution with pH may also come into play. Overall, this study presents evidence for the influence of pH on Pb sorption mechanisms, and addresses the efficiency of Pb immobilization in calcitic systems.     

Arsenic uptake by natural calcite: An XAS study

As-bearing travertine rocks from Tuscany (Italy), where previous studies suggested the existence of a CO₃²⁻ ⇔ AsO₃³⁻ substitution in the calcite lattice, were investigated with X-ray Absorption Spectroscopy (XAS) at the As K-edge (11,867 eV). In two of the studied samples, XANES indicates that As is in the 5+ oxidation state only, and EXAFS analysis reveals a local environment typical of arsenate species. For these samples, the lack of detectable second shell signals suggests a poorly ordered environment, possibly corresponding to an adsorption onto oxide and/or silicate phases. On the other hand, in the third sample XANES reveals a mixed As oxidation state (III and V). This sample also presents evident next nearest neighbor coordination shells, attributed to As-Ca and As-As contributions. The occurrence of next neighbor shells is evidence that part of As is incorporated in an ordered lattice. Furthermore, the local structure revealed by EXAFS is compatible with As incorporation in the calcite phase, as further supported by DFT simulations. The observation of next neighbors shells only in the As(III)-rich sample suggests the substitution of the arsenite group in place of the carbonate one (CO₃²⁻ ⇔ AsO₃³⁻). The conclusion of this work is that uptake of As by calcite is in general less favored than adsorption onto iron oxhydroxides, but could become environmentally important wherever the latter phenomenon is hindered.     

Surface complexation model for multisite adsorption of copper(II) onto kaolinite

We measured the adsorption of Cu(II) onto kaolinite from pH 3-7 at constant ionic strength. EXAFS spectra show that Cu(II) adsorbs as (CuO₄H_n)ⁿ⁻⁶ and binuclear (Cu₂O₆H_n)ⁿ⁻⁸ inner-sphere complexes on variable-charge ≡AlOH sites and as Cu²⁺ on ion exchangeable ≡X--H⁺ sites. Sorption isotherms and EXAFS spectra show that surface precipitates have not formed at least up to pH 6.5. Inner-sphere complexes are bound to the kaolinite surface by corner-sharing with two or three edge-sharing Al(O,OH)₆ polyhedra. Our interpretation of the EXAFS data are supported by ab initio (density functional theory) geometries of analog clusters simulating Cu complexes on the {110} and {010} crystal edges and at the ditrigonal cavity sites on the {001}. Having identified the bidentate (≡AlOH)₂Cu(OH)₂⁰, tridentate (≡Al₃O(OH)₂)Cu₂(OH)₃⁰ and ≡X--Cu²⁺ surface complexes, the experimental copper(II) adsorption data can be fit to the reactions

     

Structures and stabilities of Cd(II) and Cd(II)-phthalate complexes at the goethite/water interface

The complexation of Cd(II) and Cd(II)-phthalate at the goethite/water interface were investigated by EXAFS and IR spectroscopy, by batch adsorption experiments and by potentiometric titrations at 298.15 K. The EXAFS spectra showed Cd(II) to form only inner-sphere corner-sharing complexes with the goethite surface sites in the presence and absence of phthalate. EXAFS spectra also showed the presence of Cd(II)-chloride complexes in 0.1 mol/L NaCl. IR spectra also showed phthalate to form (1) an inner-sphere complex with adsorbed corner-sharing Cd(II) surface complexes in the pH 3.5 to 9.5 and (2) an outer-sphere complex with the same type of corner-sharing Cd(II) complex however at pH > 6, in addition to the inner- and outer-sphere complexes of phthalate reported in a previous study. The potentiometric titration and the batch adsorption data were used to constrain the formation constants of the different Cd(II)-phthalate surface complexes on the dominant {110} and the {001} planes of the goethite. The models were carried out with the Charge Distribution Multisite Complexation model coupled to the Three Plane Model and can predict the molecular-scale speciation of cadmium and phthalate in the presence of goethite. Cd(II) adsorption models calibrated on a 90 m²/g goethite also could accurately predict experimental data for a 37 m²/g goethite of slightly different basic charging properties.     

Uranyl adsorption onto montmorillonite: Evaluation of binding sites and carbonate complexation

The fate and transport of uranium in contaminated soils and sediments may be affected by adsorption onto the surface of minerals such as montmorillonite. Extended X-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the adsorption of uranyl (UO₂²⁺) onto Wyoming montmorillonite. At low pH (∼4) and low ionic strength (10⁻³ M), uranyl has an EXAFS spectrum indistinguishable from the aqueous uranyl cation, indicating binding via cation exchange. At near-neutral pH (∼7) and high ionic strength (1 M), the equatorial oxygen shell of uranyl is split, indicating inner-sphere binding to edge sites. Linear-combination fitting of the spectra of samples reacted under conditions where both types of binding are possible reveals that cation exchange at low ionic strengths on SWy-2 may be more important than predicted by past surface complexation models of U(VI) adsorption on related montmorillonites. Analysis of the binding site on the edges of montmorillonite suggests that U(VI) sorbs preferentially to [Fe(O,OH)₆] octahedral sites over [Al(O,OH)₆] sites. When bound to edge sites, U(VI) occurs as uranyl-carbonato ternary surface complexes in systems equilibrated with atmospheric CO₂. Polymeric surface complexes were not observed under any of the conditions studied. Current surface complexation models of uranyl sorption on clay minerals may need to be reevaluated to account for the possible increased importance of cation exchange reactions at low ionic strengths, the presence of reactive octahedral iron surface sites, and the formation of uranyl-carbonato ternary surface complexes. Considering the adsorption mechanisms observed in this study, future studies of U(VI) transport in the environment should consider how uranium retardation will be affected by changes in key solution parameters, such as pH, ionic strength, exchangeable cation composition, and the presence or absence of CO₂.     

The long-term fate of Cu, Zn, and Pb adsorption complexes at the calcite surface: An X-ray absorption spectroscopy study

In this study, the speciation of Zn²⁺, Pb²⁺, and Cu²⁺ ions sorbed at the calcite surface was monitored during a 2.5-year reaction period, using extended X-ray absorption spectroscopy to characterize metal speciation on the molecular scale. Experiments were performed using pre-equilibrated calcite-water suspensions of pH 8.3, at metal concentrations below the solubility of metal hydroxide and carbonate precipitates, and at constant metal surface loadings. The EXAFS results indicate that all three metals remained coordinated at the calcite surface as inner-sphere adsorption complexes during the 2.5-year ageing period, with no evidence to suggest slow formation of dilute metal-calcite solid solutions under the reaction conditions employed. All three divalent metals were found to form non-octahedral complexes upon coordination to the calcite surface, with Zn²⁺ adsorbing as a tetrahedral complex, Cu²⁺ as a Jahn-Teller distorted octahedral complex, and Pb²⁺ coordinating as a trigonal- or square-pyramidal surface complex. The non-octahedral configurations of these surface complexes may have hindered metal transfer from the calcite surface into the bulk, where Ca²⁺ is in octahedral coordination with respect to first-shell O. The use of pre-equilibrated calcite suspensions, with no net calcite dissolution or precipitation, likely prevented metal incorporation into the lattice as a result of surface recrystallization. The results from this study imply that ageing alone does not increase the stability of Zn²⁺, Pb²⁺, and Cu²⁺ partitioning to calcite if equilibrium with the solution is maintained during reaction; under these conditions, these metals are likely to remain available for exchange even after extended sorption times.     

Complexation of trace metals by adsorbed natural organic matter

The adsorption behavior and solution speciation of Cu(II) and Cd(II) were studied in model systems containing colloidal alumina particles and dissolved natural organic matter. At equilibrium a significant fraction of the alumina surface was covered by adsorbed organic matter. Cu(II) was partitioned primarily between the surface-bound organic matter and dissolved Cu-organic complexes in the aqueous phase. Complexation of Cu²⁺ with the functional groups of adsorbed organic matter was stronger than complexation with uncovered alumina surface hydroxyls. It is shown that the complexation of Cu(II) by adsorbed organic matter can be described by an apparent stability constant approximately equal to the value found for solution phase equilibria. In contrast, Cd(II) adsorption was not significantly affected by the presence of organic matter at the surface, due to weak complex formation with the organic ligands. The results demonstrate that general models of trace element partitioning in natural waters must consider the presence of adsorbed organic matter.     

Effect of silicic acid on arsenate and arsenite retention mechanisms on 6-L ferrihydrite: A spectroscopic and batch adsorption approach

The competitive adsorption of arsenate and arsenite with silicic acid at the ferrihydrite–water interface was investigated over a wide pH range using batch sorption experiments, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, extended X-ray absorption fine structure (EXAFS) spectroscopy, and density functional theory (DFT) modeling. Batch sorption results indicate that the adsorption of arsenate and arsenite on the 6-L ferrihydrite surface exhibits a strong pH-dependence, and the effect of pH on arsenic sorption differs between arsenate and arsenite. Arsenate adsorption decreases consistently with increasing pH; whereas arsenite adsorption initially increases with pH to a sorption maximum at pH 7–9, where after sorption decreases with further increases in pH. Results indicate that competitive adsorption between silicic acid and arsenate is negligible under the experimental conditions; whereas strong competitive adsorption was observed between silicic acid and arsenite, particularly at low and high pH. In situ, flow-through ATR-FTIR data reveal that in the absence of silicic acid, arsenate forms inner-sphere, binuclear bidentate, complexes at the ferrihydrite surface across the entire pH range. Silicic acid also forms inner-sphere complexes at ferrihydrite surfaces throughout the entire pH range probed by this study (pH 2.8–9.0). The ATR-FTIR data also reveal that silicic acid undergoes polymerization at the ferrihydrite surface under the environmentally-relevant concentrations studied (e.g., 1.0 mM). According to ATR-FTIR data, arsenate complexation mode was not affected by the presence of silicic acid. EXAFS analyses and DFT modeling confirmed that arsenate tetrahedra were bonded to Fe metal centers via binuclear bidentate complexation with average As(V)-Fe bond distance of 3.27 Å. The EXAFS data indicate that arsenite forms both mononuclear bidentate and binuclear bidentate complexes with 6-L ferrihydrite as indicated by two As(III)–Fe bond distances of ∼2.92–2.94 and 3.41–3.44 Å, respectively. The As–Fe bond distances in both arsenate and arsenite EXAFS spectra remained unchanged in the presence of Si, suggesting that whereas Si diminishes arsenite adsorption preferentially, it has a negligible effect on As–Fe bonding mechanisms.     

Sequestration of Sr(II) by calcium oxalate—A batch uptake study and EXAFS analysis of model compounds and reaction products

Calcium oxalate monohydrate (CaC₂O₄·H₂O—abbreviated as CaOx) is produced by two-thirds of all plant families, comprising up to 80 wt.% of the plant tissue and found in many surface environments. It is unclear, however, how CaOx in plants and soils interacts with metal ions and possibly sequesters them. This study examines the speciation of Sr(II)_aq following its reaction with CaOx. Batch uptake experiments were conducted over the pH range 4-10, with initial Sr solution concentrations, [Sr]_aq, ranging from 1 × 10⁻⁴ to 1 × 10⁻³ M and ionic strengths ranging of 0.001-0.1 M, using NaCl as the background electrolyte. Experimental results indicate that Sr uptake is independent of pH and ionic strength over these ranges. After exposure of CaOx to Sr_aq for two days, the solution Ca concentration, [Ca]_aq, increased for all samples relative to the control CaOx suspension (with no Sr added). The amount of Sr_aq removed from solution was nearly equal to the total [Ca]_aq after exposure of CaOx to Sr. These results suggest that nearly 90% of the Sr is removed from solution to a solid phase as Ca is released into solution. We suggest that the other 10% is sequestered through surface adsorption on a solid phase, although we have no direct evidence for this. Extended X-ray absorption fine structure (EXAFS) spectroscopy was used to determine the molecular-level speciation of Sr in the reaction products. Deconvolutions of the Sr K-edge EXAFS spectra were performed to identify multi-electron excitation (MEE) features. MEE effects were found to give rise to low-frequency peaks in the Fourier transform before the first shell of oxygen atoms and do not affect EXAFS fitting results. Because of potential problems caused by asymmetric distributions of Sr-O distances when fitting Sr K-edge EXAFS data using the standard harmonic model, we also employed a cumulant expansion model and an asymmetric analytical model to account for anharmonic effects in the EXAFS data. For Sr-bearing phases with low to moderate first-shell (Sr-O pair correlation) anharmonicity, the cumulant expansion model is sufficient for EXAFS fitting; however, for higher degrees of anharmonicity, an analytical model is required. Based on batch uptake results and EXAFS analyses of reaction products, we conclude that Sr is dominantly sequestered by a solid phase at the CaOx surface, likely the result of a dissolution-reprecipitation mechanism, to form SrC₂O₄ of mixed hydration state (i.e. SrOx·nH₂O, where n = 0, 1, or 2). Surprisingly, no spectroscopic or XRD evidence was found for a (Sr,Ca)Ox solid solution or for a separate SrCO₃ phase. In addition, we found no evidence for Sr(II) inner-sphere sorption complexes on CaOx surfaces based on lack of Sr-Ca second-neighbor pair correlations in the EXAFS spectra, although some type of Sr(II) surface complex (perhaps a type B Sr-oxalate ternary complex or an outer-sphere Sr(II) complex) or some as yet undetected Sr-bearing solid phases are needed to account for approximately 10% of Sr uptake by CaOx. The formation of a hydrated SrOx phase in environments under conditions similar to those of our experiments should retard Sr mobility and could be a significant factor in the biogeochemical cycling of Sr in soils and sediments or in plants and plant litter where CaOx is present.     

Competitive sorption of copper and lead at the oxide-water interface: Implications for surface site density

The competitive sorption of Cu(II) and Pb(II) to colloidal hematite was investigated as a function of pH and total metal concentration. Acid–base titrations of the hematite and single-metal sorption experiments for Cu and Pb at low to medium surface coverages were used to calibrate two surface complexation models, the triple layer model, and a 2-pK basic Stern model with ion-pair formation. The surface site density was systematically varied from 2 to 20 sites/nm². Three different metal surface complexes were considered: (1) an inner-sphere metal complex; (2) an outer-sphere metal complex; and (3) an outer-sphere complex of singly hydrolyzed metal cations. Both models provided excellent fits to acid–base titration and single-metal sorption data, regardless of the surface site density used. With increasing site density, ΔpK of the stability constants for protonation reactions increased and metal surface complexes decreased steadily. The calibrated models based on different site densities were used to predict competitive sorption effects between Cu and Pb and single-metal sorption at higher total metal concentrations. Precipitation of oversaturated solid phases was included in the calculations. Best predictions of competitive sorption effects were obtained with surface site densities between 5 and 10 sites/nm². The results demonstrate that surface site density is a key parameter if surface complexation models are exposed to more complex, multicomponent environments. We conclude that competitive metal sorption experiments can be used to obtain additional information about the relevant surface site density of oxide mineral surfaces.     

Outer-sphere adsorption of Pb(II)EDTA on goethite

Fourier transform infrared (FTIR) and extended X-ray absorption fine structure (EXAPS) spectroscopic measurements were performed on Pb(II)ethylenediaminetetraacetic (EDTA) adsorbed on goethite as a function of pH (4–6), Pb(II)EDTA concentration (0.11–72 μM), and ionic strength (16 μM–0.5 M). FTIR measurements show no evidence for carboxylate-Fe(III) bonding or protonation of EDTA at Pb:EDTA = 1:1. Both FTIR and EXAFS spectroscopic measurements suggest that EDTA acts as a hexadentate ligand, with all four of its carboxylate and both of its amine groups bonded to Pb(II). No evidence was observed for inner-sphere Pb(II)-goethite bonding at Pb:EDTA = 1:1. Hence, the adsorbed complexes should have composition Pb(II)EDTA²⁻. Because substantial uptake of PbEDTA(II)²⁻ occurred in the samples, we interpret that Pb(II)EDTA²⁻ adsorbed as outer-sphere complexes and/or as complexes that lose part of their solvation shells and hydrogen bond directly to goethite surface sites. We propose the term “hydration-sphere” for the latter type of complexes because they should occupy space in the primary hydration spheres of goethite surface functional groups and to distinguish this mode of sorption from common structural definitions of inner- and outer-sphere complexes. The lack of evidence for inner-sphere EDTA-Fe(III) bonding suggests that previously proposed metal/ligand-promoted dissolution mechanisms should be modified, specifically to account for the presence of outer-sphere precursor species.     

Adsorption of Cu(II) to Bacillus subtilis: A pH-dependent EXAFS and thermodynamic modelling study

Bacteria are very efficient sorbents of trace metals, and their abundance in a wide variety of natural aqueous systems means biosorption plays an important role in the biogeochemical cycling of many elements. We measured the adsorption of Cu(II) to Bacillus subtilis as a function of pH and surface loading. Adsorption edge and XAS experiments were performed at high bacteria-to-metal ratio, analogous to Cu uptake in natural geologic and aqueous environments. We report significant Cu adsorption to B. subtilis across the entire pH range studied (pH ∼2-7), with adsorption increasing with pH to a maximum at pH ∼6. We determine directly for the first time that Cu adsorbs to B. subtilis as a (CuO₅H_n)ⁿ⁻⁸ monodentate, inner-sphere surface complex involving carboxyl surface functional groups. This Cu-carboxyl complex is able to account for the observed Cu adsorption across the entire pH range studied. Having determined the molecular adsorption mechanism of Cu to B. subtilis, we have developed a new thermodynamic surface complexation model for Cu adsorption that is informed by and consistent with EXAFS results. We model the surface electrostatics using the 1pK basic Stern approximation. We fit our adsorption data to the formation of a monodentate, inner-sphere RCOOCu⁺ surface complex. In agreement with previous studies, this work indicates that in order to accurately predict the fate and mobility of Cu in complex biogeochemical systems, we must incorporate the formation of Cu-bacteria surface complexes in reactive transport models. To this end, this work recommends log K RCOOCu⁺ = 7.13 for geologic and aqueous systems with generally high B. subtilis-to-metal ratio.     

Sorption of Cu and Pb to kaolinite-fulvic acid colloids: Assessment of sorbent interactions

The sorption of Cu(II) and Pb(II) to kaolinite-fulvic acid colloids was investigated by potentiometric titrations. To assess the possible interactions between kaolinite and fulvic acid during metal sorption, experimental sorption isotherms were compared with predictions based on a linear additivity model (LAM). Suspensions of 5 g L⁻¹ kaolinite and 0.03 g L⁻¹ fulvic acid in 0.01 M NaNO₃ were titrated with Cu and Pb solutions, respectively. The suspension pH was kept constant at pH 4, 6, or 8. The free ion activities of Cu²⁺ and Pb²⁺ were monitored in the titration vessel using ion selective electrodes. Total dissolved concentrations of metals (by ICP-MS) and fulvic acid (by UV-absorption) were determined in samples taken after each titration step. The amounts of metals sorbed to the solid phase, comprised of kaolinite plus surface-bound fulvic acid, were calculated by difference. Compared to pure kaolinite, addition of fulvic acid to the clay strongly increased metal sorption to the solid phase. This effect was more pronounced at pH 4 and 6 than at pH 8, because more fulvic acid was sorbed to the kaolinite surface under acidic conditions. Addition of Pb enhanced the sorption of fulvic acid onto kaolinite at pH 6 and 8, but not at pH 4. Addition of Cu had no effect on the sorption of fulvic acid onto kaolinite. In the LAM, metal sorption to the kaolinite surface was predicted by a two-site, 1-pK basic Stern model and metal sorption to the fulvic acid was calculated with the NICA-Donnan model, respectively. The LAM provided good predictions of Cu sorption to the kaolinite-fulvic acid colloids over the entire range in pH and free Cu²⁺ ion activity (10⁻¹² to 10⁻⁵). The sorption of Pb was slightly underestimated by the LAM under most conditions. A fractionation of the fulvic acid during sorption to kaolinite was observed, but this could not explain the observed deviations of the LAM predictions from the experimental Pb sorption isotherms.     

Sorption and catalytic oxidation of Fe(II) at the surface of calcite

The effect of sorption and coprecipitation of Fe(II) with calcite on the kinetics of Fe(II) oxidation was investigated. The interaction of Fe(II) with calcite was studied experimentally in the absence and presence of oxygen. The sorption of Fe(II) on calcite occurred in two distinguishable steps: (a) a rapid adsorption step (seconds-minutes) was followed by (b) a slower incorporation (hours-weeks). The incorporated Fe(II) could not be remobilized by a strong complexing agent (phenanthroline or ferrozine) but the dissolution of the outmost calcite layers with carbonic acid allowed its recovery. Based on results of the latter dissolution experiments, a stoichiometry of 0.4 mol% Fe:Ca and a mixed carbonate layer thickness of 25 nm (after 168 h equilibration) were estimated. Fe(II) sorption on calcite could be successfully described by a surface adsorption and precipitation model (Comans & Middelburg, GCA51 (1987), 2587) and surface complexation modeling (Van Cappellen et al., GCA57 (1993), 3505; Pokrovsky et al., Langmuir16 (2000), 2677). The surface complex model required the consideration of two adsorbed Fe(II) surface species, >CO₃Fe⁺ and >CO₃FeCO₃H⁰. For the formation of the latter species, a stability constant is being suggested. The oxidation kinetics of Fe(II) in the presence of calcite depended on the equilibration time of aqueous Fe(II) with the mineral prior to the introduction of oxygen. If pre-equilibrated for >15 h, the oxidation kinetics was comparable to a calcite-free system (t_1/2 = 145 ± 15 min). Conversely, if Fe(II) was added to an aerated calcite suspension, the rate of oxidation was higher than in the absence of calcite (t_1/2 = 41 ± 1 min and t_1/2 = 100 ± 15 min, respectively). This catalysis was due to the greater reactivity of the adsorbed Fe(II) species, >CO₃FeCO₃H⁰, for which the species specific rate constant was estimated.