Sorption of yttrium and rare earth elements by amorphous ferric hydroxide: Influence of solution complexation with carbonate

The influence of solution complexation on the sorption of yttrium and the rare earth elements (YREEs) by amorphous ferric hydroxide was investigated at 25 °C over a range of pH (4.0-7.1) and carbonate concentrations . Distribution coefficients, defined as , where [MS_i]_T is the total concentration of sorbed YREE, M_T is the total YREE concentration in solution, and [S_i] is the concentration of amorphous ferric hydroxide, initially increased in magnitude with increasing carbonate concentration, and then decreased. The initial increase of is due to sorption of YREE carbonate complexes , in addition to sorption of free YREE ions (M³⁺). The subsequent decrease of , which is more extensive for the heavy REEs, is due to the increasing intensity of YREE solution complexation by carbonate ions. The competition for YREEs between solution complexation and surface complexation was modeled via the equation:

     

Prediction of the vapor-liquid distribution constants for volatile nonelectrolytes in water up to its critical temperature

The distribution of solutes between coexisting liquid and vapor phases of water can be expressed by the distribution constant, K_D, defined as

     

A simple predictive model of quartz solubility in water-salt-CO2 systems at temperatures up to 1000 °C and pressures up to 1000 MPa

Knowledge of the solubility of quartz over a broad spectrum of aqueous fluid compositions and T-P conditions is essential to our understanding of water-rock interaction in the Earth’s crust. We propose an equation to compute the molality of aqueous silica, m_SiO2(aq), mol·(kg H₂O)⁻¹, in equilibrium with quartz and water-salt-CO₂ fluids, as follows:

     

A spectrophotometric study of neodymium(III) complexation in sulfate solutions at elevated temperatures

The formation constants of neodymium complexes in sulfate solutions have been determined spectrophotometrically at temperatures of 30-250 °C and a pressure of 100 bars. The dominant species in the solution are NdSO₄⁺ and Nd(SO₄)₂⁻, with the latter complex being more important at higher temperature. Equilibrium constants were calculated for the following reactions:

     

Alkali exchange equilibria between a silicate melt and coexisting magmatic volatile phase: an experimental study at 800°C and 100 MPa

Many experimental studies have been performed to evaluate the composition of coexisting silicate melts and magmatic volatile phases (MVP). However, few studies have attempted to define the relationship between melt chemistry and the acidity of a chloride-bearing fluid. Here we report data on melt composition as a function of the HCl concentration of coexisting brines. We performed 35 experimental runs with a NaCl-KCl-HCl-H₂O brine (70 wt% NaCl [equivalent])-silicate melt (starting composition of Qtz_0.38Ab_0.33Or_0.29, anhydrous) assemblage at 800°C and 100 MPa. We determined an apparent equilibrium constant

     

Kinetics of gypsum crystal growth from high ionic strength solutions: A case study of Dead Sea - seawater mixtures

Gypsum precipitation kinetics were examined from a wide range of chemical compositions , ionic strengths (4.75-10 m) and saturation state with respect to gypsum (1.16-1.74) in seeded batch experiments of mixtures of Ca²⁺-rich Dead Sea brine and -rich seawater. Despite the variability in the experimental solutions, a single general rate law was formulated to describe the heterogeneous precipitation rate of gypsum from these mixtures:

     

Pb and rare earth element diffusion in xenotime

Diffusion of Pb and the rare earth elements Sm, Dy and Yb have been characterized in synthetic xenotime under dry conditions. The synthetic xenotime was grown via a Na₂CO₃–MoO₃ flux method. The sources of diffusant for the rare earth diffusion experiments were REE phosphate powders, with experiments run using sources containing a single REE. For Pb, the source consisted a mixture of YPO₄ and PbTiO₃. Experiments were performed by placing source and xenotime in Pt capsules, and annealing capsules in 1 atm furnaces for times ranging from 30 min to several weeks, at temperatures from 1000 to 1500 °C. The REE and Pb distributions in the xenotime were profiled by Rutherford Backscattering Spectrometry (RBS).The following Arrhenius relations are obtained for diffusion in xenotime, normal to (101):

Diffusivities among the REE do not differ greatly in xenotime over the investigated temperature range, in contrast to findings for the REE in zircon [Cherniak, D.J., Hanchar, J.M., Watson, E.B., 1997. Rare earth diffusion in zircon. Chem. Geol. 134, 289–301.], where the LREE diffuse more slowly, and with higher activation energies for diffusion, than the heavier rare earths. In zircon, these differences among diffusion of the rare earths are attributed to the relatively large size of the REE with respect to Zr, for which they likely substitute in the zircon lattice. With the systematic increase in ionic radius from the heavy to lighter REE, this size mismatch becomes more pronounced and diffusivities of the LREE are as consequence slower. Although xenotime is isostructural with zircon, the REE are more closely matched in size to Y, so in xenotime this effect appears much smaller and the REE diffuse at similar rates. In addition, the process of diffusion in xenotime likely involves simple REE^+ 3 → Y^+ 3 exchange, without charge compensation as needed for REE^+ 3 → Zr^+ 4 exchange in zircon. This latter factor may also contribute to the large activation energies for diffusion of the REE in zircon (i.e., 691–841 kJ mol^− 1, [Cherniak, D.J., Hanchar, J.M., Watson, E.B., 1997. Rare earth diffusion in zircon. Chem. Geol. 134, 289–301.]), in comparison with those for xenotime.For Pb, the following Arrhenius relation is obtained (also normal to (101)):

These measurements suggest that Pb diffusion in xenotime is quite slow, even slower than Pb diffusion in monazite and zircon, and considerably slower than diffusion of the REE in xenotime. Xenotime may therefore be even more retentive of Pb isotope signatures than either monazite or zircon in cases where Pb isotopes are altered solely by volume diffusion. However, because the activation energy for Pb diffusion in xenotime is lower than those for monazite and zircon, Pb diffusion may be somewhat faster at many temperatures of geologic interest in xenotime than in monazite or zircon.     

Chalcopyrite leaching: The rate controlling factors

The processes that determine the rate of chalcopyrite leaching are central to understanding how chalcopyrite (CuFeS₂) behaves under the environmentally adverse conditions of acid rock drainage. To this end the effect of the acid anion on chalcopyrite leach rates using a variety of acidic media (H₂SO₄, HClO₄, HCl and H₂SO₄ with 0.25 M NaCl) under carefully controlled solution conditions (pH 1 and 2, Eh 750 mV (SHE) and 75 °C) has been examined. These conditions have been chosen to enable sufficient leach rates for accurate experimental determination and to compare to the previous mechanistic analysis carried out by Harmer et al. (2006).Extensive surface analysis of leach residues demonstrated that variations in the surface speciation could not be responsible for the observed variations in leach rate. The rate of Cu release, however, was found to be first order with respect to Fe³⁺ activity and inversely proportional with respect to H⁺ activity to the power of 0.7:

     

The ionic strength dependence of lead (II) carbonate complexation in perchlorate media

Lead speciation in many aqueous geochemical systems is dominated by carbonate complexation. However, direct observations of Pb²⁺ complexation by carbonate ions are few in number. This work represents the first investigation of the equilibrium over a range of ionic strength. Through spectrophotometric observations of formation at 25 °C in NaHCO₃-NaClO₄ solutions, formation constants of the form were determined between 0.001 and 5.0 molal ionic strength. Formation constant results were well represented by the equation:

     

Toward a general viscosity equation for natural anhydrous and hydrous silicate melts

A new and empirical viscosity equation for anhydrous and hydrous natural silicate melts has been developed using the following formulation:

     

Chemical controls on the solubility, speciation and mobility of lanthanum at near surface conditions: A geochemical modeling study

Recent experimental determinations of the solubility products of common rare earth minerals such as monazite and xenotime and stability constants for chloride, sulfate, carbonate and hydroxide complexes provide a basis to model quantitatively the solubility, and therefore the mobility, of rare earth elements (REE) at near surface conditions. Data on the mobility of REE and stabilities of REE complexes at near-neutral conditions are of importance to safe nuclear waste disposal, and environmental monitoring. The aim of this study is to understand REE speciation and solubility of a given REE in natural environments. In this study, a series of formation constants for La aqueous complexes are recommended by using the specific interaction theory (SIT) for extrapolation to infinite dilution. Then, a thermodynamic model has been employed for calculation of the solubility and speciation of La in soil solutions reacted with the La end-member of mineral monazite (LaPO₄), and other La-bearing solid phases including amorphous lanthanum hydroxide (La(OH)₃, am) and different La carbonates, as a function of various inorganic and organic ligand concentrations. Calculations were carried out at near-neutral pH (pH 5.5–8.5) and 25 °C at atmospheric CO₂ partial pressure. The model takes account of the species: La³⁺, LaCl²⁺, , , , , , , , , La(OH)²⁺, LaOx⁺, , LaAc²⁺ and (where Ox²⁻ = oxalate and Ac⁻ = acetate).The calculations indicate that the La species that dominate at pH 5.5–8.5 in the baseline model soil solution (BMSS) include La³⁺, LaOx⁺, , and in order of increasing importance as pH rises. The solubility of monazite in the BMSS remains less than 3 × 10⁻⁹ M, exhibiting a minimum of 2 × 10⁻¹² M at pH 7.5. The calculations quantitatively demonstrate that the concentrations of La controlled by the solubility of other La-bearing solid phases are many orders of magnitude higher than those controlled by monazite in the pH range from 5.5 to 8.5, suggesting that monazite is likely to be the solubility-controlling phase at this pH range. The calculations also suggest that significant mobility of La (and other REE) is unlikely because high water–rock ratios on the order of at least 10⁴ (mass ratio) are required to move 50% of the La from a soil. An increase in concentration of oxalate by one order of magnitude from that of the baseline model solution results in the dominance of LaOx⁺ at pH 5.5–7.5. Similarly, the increase in concentration of by one order of magnitude makes the dominant species at pH 5.5–7.5. Above pH 7.5, carbonate complexes are important. The increase in oxalate or concentrations by one order of magnitude can enhance the solubility of monazite by a factor of up to about 6 below neutral pH, in comparison with that in the baseline model soil solution. From pH 7.0 to 8.5, the solubility of monazite in the soil solutions with higher concentrations of oxalate or is similar, or almost identical, to that in the BMSS.     

Boric acid adsorption on humic acids: Ab initio calculation of structures, stabilities, B NMR and B,B isotopic fractionations of surface complexes

Boric acid, B(OH)₃, forms complexes in aqueous solution with a number of bidentate O-containing ligands, HL⁻, where H₂L is C₂O₄H₂ (oxalic acid), C₃O₄H₄ (malonic acid), C₂H₆O₂ (ethylene glycol), C₆H₆O₂ (catechol), C₁₀H₈O₂ (dioxynaphthalene) and C₂O₃H₄ (glycolic acid). McElligott and Byrne [McElligott, S., Byrne, R.H., 1998. Interaction of and in seawater: Formation of . Aquat. Geochem.3, 345-356.] have also found B(OH)₃ to form an aqueous complex with . Recently Lemarchand et al. [Lemarchand, E., Schott, J., Gaillardeet, J., 2005. Boron isotopic fractionation related to boron sorption on humic acid and the structure of surface complexes formed. Geochim. Cosmochim. Acta69, 3519-3533] have studied the formation of surface complexes of B(OH)₃ on humic acid, determining ¹¹B NMR shifts and fitted values of formation constants, and ¹¹B, ¹⁰B isotope fractionations for a number of surface complexation models. Their work helps to clarify both the nature of the interaction of boric acid with the functional groups in humic acid and the nature of some of these coordinating sites on the humic acid. The determination of isotope fractionations may be seen as a form of vibrational spectroscopy, using the fractionating element as a local probe of the vibrational spectrum. We have calculated quantum mechanically the structures, stabilities, vibrational spectra, ¹¹B NMR spectra and ¹¹B,¹⁰B isotope fractionations of a number of complexes B(OH)₂L⁻ formed by reactions of the type:

     

H2O diffusion models in rhyolitic melt with new high pressure data

Water diffusion in silicate melts is important for understanding bubble growth in magma, magma degassing and eruption dynamics of volcanos. Previous studies have made significant progress on water diffusion in silicate melts, especially rhyolitic melt. However, the pressure dependence of H₂O diffusion is not constrained satisfactorily. We investigated H₂O diffusion in rhyolitic melt at 0.95–1.9 GPa and 407–1629 °C, and 0.2–5.2 wt.% total water (H₂O_t) content with the diffusion-couple method in a piston-cylinder apparatus. Compared to previous data at 0.1–500 MPa, H₂O diffusivity is smaller at higher pressures, indicating a negative pressure effect. This pressure effect is more pronounced at low temperatures. Assuming H₂O diffusion in rhyolitic melt is controlled by the mobility of molecular H₂O (H₂O_m), the diffusivity of H₂O_m (D_H2Om) at H₂O_t ≤ 7.7 wt.%, 403–1629 °C, and ≤ 1.9 GPa is given by

D_H2Om=D₀exp(aX),