Oxygen-isotopic compositions of relict and host grains in chondrules in the Yamato 81020 CO3.0 chondrite

We report the oxygen-isotope compositions of relict and host olivine grains in six high-FeO porphyritic olivine chondrules in one of the most primitive carbonaceous chondrites, CO3.0 Yamato 81020. Because the relict grains predate the host phenocrysts, microscale in situ analyses of O-isotope compositions can help assess the degree of heterogeneity among chondrule precursors and constrain the nebular processes that caused these isotopic differences. In five of six chondrules studied, the Δ¹⁷O (=δ¹⁷O −0.52 · δ¹⁸O) compositions of host phenocrysts are higher than those in low-FeO relict grains; the one exception is for a chondrule with a moderately high-FeO relict. Both the fayalite compositions as well as the O-isotope data support the view that the low-FeO relict grains formed in a previous generation of low-FeO porphyritic chondrules that were subsequently fragmented. It appears that most low-FeO porphyritic chondrules formed earlier than most high-FeO porphyritic chondrules, although there were probably some low-FeO chondrules that formed during the period when most high-FeO chondrules were forming.     

Ubiquitous low-FeO relict grains in type II chondrules and limited overgrowths on phenocrysts following the final melting event

Type II porphyritic chondrules commonly contain several large (>40 μm) olivine phenocrysts; furnace-based cooling rates based on the assumption that these phenocrysts grew in a single-stage melting-cooling event yield chondrule cooling-rate estimates of 0.01-1 K s⁻¹. Because other evidence indicates much higher cooling rates, we examined type II chondrules in the CO3.0 chondrites that have experienced only minimal parent-body alteration. We discovered three kinds of evidence indicating that only minor (4-10 μm) olivine growth occurred after the final melting event: (1) Nearly all (>90%) type II chondrules in CO3.0 chondrites contain low-FeO relict grains; overgrowths on these relicts are narrow, in the range of 2-12 μm. (2) Most type II chondrules contain some FeO-rich olivine grains with decurved surfaces and acute angles between faces indicating that the grains are fragments from an earlier generation of chondrules; the limited overgrowth thicknesses following the last melting event are too thin to disguise the shard-like nature of these grains. (3) Most type II chondrules contain many small (<20 μm) euhedral or subhedral phenocrysts with central compositions that are much more ferroan than the centers of the large phenocrysts; their small sizes document the small amount of growth that occurred after the final melting event. If overgrowth thicknesses were small (4-10 μm) after the final melting event, it follows that large fractions of coarse (>40 μm) high-FeO phenocrysts are relicts from earlier generations of chondrules, and that cooling rates after the last melting event were much more rapid than indicated by models based on a single melting event. These observations are thus inconsistent with the “classic” igneous model of formation of type II porphyritic chondrules by near-total melting of a precursor mix followed by olivine nucleation on a very limited number of nuclei (say, ≤10) and by growth to produce the large phenocrysts during a period of monotonic (and roughly linear) cooling. Our observations that recycled chondrule materials constitute a large component of the phenocrysts of type II chondrules also imply that this kind of chondrule formed relatively late during the chondrule-forming period.     

Al-Mg systematics of chondrules in a primitive CO chondrite

We have conducted systematic investigations of formation age, chemical compositions, and mineralogical characteristics of ferromagnesian chondrules in Yamato-81020 (CO3.05), one of the most primitive carbonaceous chondrites, to get better understanding of the origin of chemical groups of chondrites. The ²⁶Al-²⁶Mg isotopic system were measured in fourteen FeO-poor (Type I), six FeO-rich (Type II) and two aluminum-rich (Al-rich) chondrules using a secondary ion mass spectrometer. Excesses of ²⁶Mg in plagioclase (1.0-13.5‰) are resolved with sufficient precision (mostly 0.4-6.6‰ at 2σ level) in all the chondrules studied except one. Chemical zoning of Mg and Na in plagioclase were investigated in detail in order to evaluate the applicability of ²⁶Al-²⁶Mg chronometer. We conclude that the Al-Mg isotope system of the chondrules in Y-81020 have not been disturbed by parent-body metamorphism and can be used as chronometer assuming homogeneous distribution of ²⁶Al. Assuming an initial ²⁶Al/²⁷Al ratio of 5 × 10⁻⁵ in the early solar system, ²⁶Al-²⁶Mg ages were found to be 1.7-2.5 Ma after CAI formation for Type I, 2.0-3.0 Ma for Type II and 1.9 and 2.6 Ma for Al-rich chondrules.The formation ages of ferromagnesian chondrules in Y-81020 are in good agreement with those of L and LL (type 3.0-3.1) chondrites in the literature, which indicates that common chondrules in the CO chondrite were formed contemporaneously with those in L and LL chondrites. The concurrent formation of chondrules of CO and L/LL chondrites suggests that the chemical differences between CO and L/LL chondrites might be caused by spatial separation of chondrule formation environments in the protoplanetary disk.     

Physical properties of chondrules in different chondrite groups: Implications for multiple melting events in dusty environments

Chondrite groups (CV, CK, CR) with large average chondrule sizes have low proportions of RP plus C chondrules, high proportions of enveloping compound chondrules, high proportions of chondrules with (thick) igneous rims, and relatively low proportions of type-I chondrules containing sulfide. In contrast, chondrite groups (CM, CO, OC, R, EH, EL) with smaller average chondrule sizes have the opposite properties. Equilibrated CK chondrites have plagioclase with relatively low Na; equilibrated OC, R, EH and EL chondrites have more sodic plagioclase. Enveloping compound chondrules and chondrules with igneous rims formed during a remelting event after the primary chondrule was incorporated into a dustball. Repeated episodes of remelting after chondrules were surrounded by dust would tend to produce large chondrules. RP and C chondrules formed by complete melting of their precursor assemblages; remelting of RP and C chondrules surrounded by dust would tend to produce porphyritic chondrules as small dust particles mixed with the melt, providing nuclei for crystallizing phenocrysts. This process would tend to diminish the numbers of RP and C chondrules. Correlations among these chondrule physical properties suggest that chondrite groups with large chondrules were typically surrounded by thick dust-rich mantles that formed in locally dusty nebular environments. Chondrules that were surrounded by thick dust mantles tended to cool more slowly because heat could not quickly radiate away. Slow cooling led to enhanced migration of sulfide to chondrule surfaces and more extensive sulfide evaporation. These chondrules also lost Na; the plagioclase that formed from equilibrated CK chondrites was thus depleted in Na.     

Trace element composition of silicate minerals in the porphyritic and nonporphyritic chondrules of Elenovka (L5) and Knyahinya (L/Ll5) meteorites

The results of SIMS and EPMA studies on the silicate minerals and bulk compositions (SEM-EDS) of porphyritic and nonporphyritic chondrules from Elenovka and Knyahinya meteorites are reported. The trace element composition of silicate minerals (olivine, low-Са pyroxene) in equilibrated ordinary chondrites (EOC) has not been affected considerably by thermal metamorphism on the chondritic parent bodies. Therefore, equilibrated chondrites can be used for chondrule-forming processes studies. Low-Са pyroxene in nonporphyritic chondrules contains higher REE, Ba, Sr concentrations than that in porphyritic chondrules at similar trace element concentrations in the olivine of chondrules. The data obtained indicate that the formation of non-porphyritic chondrules was triggered by an increase in the cooling rate of chondrules upon the formation of pyroxene, rather than a difference in the initial conditions of chondrule formation. Higher refractory incompatible element (Nb, LREE) concentrations in the olivine of chondrules than those in the olivine of the matrix and contrasting trace element (Zr, Sr, Cr, REE) concentrations in the low-Са pyroxene of the chondrules and the matrix suggest that the matrix and chondrules of the meteorites formed in one reservoir under different physico-chemical conditions (density, redox state, rotation speed, homogeneity, temperature, shocks, electrical discharge, etc.).     

Oxygen-isotopic compositions of low-FeO relicts in high-FeO host chondrules in Acfer 094, a type 3.0 carbonaceous chondrite closely related to CM

With one exception, the low-FeO relict olivine grains within high-FeO porphyritic chondrules in the type 3.0 Acfer 094 carbonaceous chondrite have Δ¹⁷O (= δ¹⁷O − 0.52 × δ¹⁸O) values that are substantially more negative than those of the high-FeO olivine host materials. These results are similar to observations made earlier on chondrules in CO3.0 chondrites and are consistent with two independent models: (1) Nebular solids evolved from low-FeO, low-Δ¹⁷O compositions towards high-FeO, more positive Δ¹⁷O compositions; and (2) the range of compositions resulted from the mixing of two independently formed components. The two models predict different trajectories on a Δ¹⁷O vs. log Fe/Mg (olivine) diagram, but our sample set has too few values at intermediate Fe/Mg ratios to yield a definitive answer.Published data showing that Acfer 094 has higher volatile contents than CO chondrites suggest a closer link to CM chondrites. This is consistent with the high modal matrix abundance in Acfer 094 (49 vol.%). Acfer 094 may be an unaltered CM chondrite or an exceptionally matrix-rich CO chondrite. Chondrules in Acfer 094 and in CO and CM carbonaceous chondrites appear to sample the same population. Textural differences between Acfer 094 and CM chondrites are largely attributable to the high degree of hydrothermal alteration that the CM chondrites experienced in an asteroidal setting.     

Evaporation and recondensation of sodium in Semarkona Type II chondrules

We have investigated the Na distributions in Semarkona Type II chondrules by electron microprobe, analyzing olivine and melt inclusions in it, mesostasis and bulk chondrule, to see whether they indicate interactions with an ambient gas during chondrule formation. Sodium concentrations of bulk chondrule liquids, melt inclusions and mesostases can be explained to a first approximation by fractional crystallization of olivine ± pyroxene. The most primitive olivine cores in each chondrule are mostly between Fa₈ and Fa₁₃, with 0.0022–0.0069 ± 0.0013 wt.% Na₂O. Type IIA chondrule olivines have consistently higher Na contents than olivines in Type IIAB chondrules. We used the dependence of olivine–liquid Na partitioning on FeO in olivine as a measure of equilibration. Extreme olivine rim compositions are ～Fa₃₅ and 0.03 wt.% Na₂O and are close to being in equilibrium with the mesostasis glass. Olivine cores compared with the bulk chondrule compositions, particularly in IIA chondrules, show very high apparent D_Na, indicating disequilibrium and suggesting that chondrule initial melts were more Na-rich than present chondrule bulk compositions. The apparent D_Na values correlate with the Na concentrations of the olivine, but not with concentrations in the bulk melt. We use equilibrium D_Na to find the Na content of the true parent liquid and estimate that Type IIA chondrules lost more than half their Na and recondensation was incomplete, whereas Type IIAB chondrules recovered most of theirs in their mesostases.Glass inclusions in olivine have lower Na than expected from fractionation of bulk composition liquids, and mesostases have higher Na than expected in calculated daughter liquids formed by fractional crystallization alone. These observations also require open system behavior of chondrules, specifically evaporation of Na before formation of melt inclusions followed by recondensation of Na in mesostases. Within this record of evaporation followed by recondensation, there is no indication of a stage with zero Na in the chondrules, which is predicted by models for shock wave cooling at canonical nebular pressures, suggesting high P_T.The high Na concentrations in olivine and mesostases indicate very high P_Na while chondrules were molten. This may be explained by local, very high particle densities where Type II chondrules formed. The high P_T, P_Na and number densities of chondrules implied suggest formation in debris clouds after protoplanetary collisions as an alternative to formation after passage of shock waves through large particle-rich clumps in the disk. Encounters of partially molten chondrules should have been frequent in these dense swarms. However, in many ordinary chondrites like Semarkona, “cluster chondrites”, compound chondrules are not abundant but instead chondrules aggregated into clusters. Chondrule melting, cooling and clustering in dense swarms contributed to rapid accretion, possibly after collision, by fallback on the grandparent body and by reaccretion as a new body downrange.     

Compositional evolution of the protoplanetary disk: Oxygen isotopes of type-II chondrules from CR2 chondrites

Chondrules are the dominant component of chondritic meteorites and attest to high-temperature transient heating events within the protoplanetary disk. They provide valuable constraint on the disk environments in which they formed and potentially the evolution of primitive planetary materials in the disk. The oxygen isotopic composition of CR2 chondrite type-II chondrules was investigated. Our data show significant variation in the isotopic compositions of the chondrules with no petrographic or geochemical means to identify what chondrule will plot where on a three-isotope diagram. Although we cannot rule out that these chondrules may have come from another chondrite-forming region, we argue in context of type-I chondrules from CR2 chondrites that CR2 type-II chondrules record changes in solid and gas composition during formation due to the vaporization of icy bodies in localized regions of the inner disk.     

Sulfur isotope composition of putative primary troilite in chondrules from Bishunpur and Semarkona

The sulfur isotopic compositions of putative primary troilite grains within 15 ferromagnesian chondrules (10 FeO-poor and 5 FeO-rich chondrules) in the least metamorphosed ordinary chondrites, Bishunpur and Semarkona, have been measured by ion microprobe. Some troilite grains are located inside metal spherules within chondrules. Since such an occurrence is unlikely to be formed by secondary sulfidization processes in the solar nebula or on parent bodies, those troilites are most likely primary, having survived chondrule-forming high-temperature events. If they are primary, they may be the residues of evaporation at high temperatures during chondrule formation and may have recorded mass-dependent isotopic fractionations. However, the supposed primary troilites measured in this study do not show any significant sulfur isotopic fractionations (<1 ‰/amu) relative to large troilite grains in matrix. Among other chondrule troilites that we measured, only one (BI-CH22) apparently has a small excess of heavy isotopes (2.7 ± 1.4 ‰/amu) consistent with isotopic fractionation during evaporation. All other grains have isotopic fractionations of <1 ‰/amu. Because sulfur is so volatile that evaporation during chondrule formation is probably inevitable, non-Rayleigh evaporation most likely explains the lack of isotopic fractionation in putative primary troilite inside chondrules. Evaporation through the surrounding silicate melt would have suppressed the isotopic fractionation after silicate dust grains melted. At lower temperatures below extensive melting of silicates, a heating rate of >10⁴-10⁶ K/h would be required to avoid a large degree of sulfur isotopic fractionation in the chondrule precursors. This heating rate may provide a new constraint on the chondrule formation processes.     

Initial Al/Al in carbonaceous-chondrite chondrules: too little Al to melt asteroids

We report ²⁶Mg excesses correlated with Al/Mg ratios in five chondrules from the primitive CO3.0 chondrite Yamato 81020 that yield a mean initial ²⁶Al/²⁷Al ratio of only (3.8 ± 0.7) × 10⁻⁶, about half that of ordinary chondrite (OC) chondrules. Even if asteroids formed immediately after chondrule formation, this ratio and the mean Al content of CO chondrites is only capable of raising the temperature of a well-insulated CO asteroid to 940 K, which is more than 560 K too low to produce differentiation. The same ratio combined with the higher Al content of CV chondrites results in a CV asteroid temperature of 1100 K. We calculate that the mean initial ²⁶Al/²⁷Al ratio of about 7.4 × 10⁻⁶ found in LL chondrules is only able to produce small amounts of melting, too little to produce differentiation. These results cast serious doubt on the viability of ²⁶Al as the heat source responsible for asteroid differentiation. Inclusion of ⁶⁰Fe raises temperatures about 160 K, but this increment is not enough to cause differentiation, even of an LL-chondrite asteroid.     

On the nature and origin of isolated olivine grains in carbonaceous chondrites

Many carbonaceous chondrites contain discrete olivine fragments that have been considered to be primitive material, i.e. direct condensates from the solar nebula or pre-solar system material. Olivine occurring in chondrules and as isolated grains in C3(0) chondrites has been characterized chemically and petrographically. Type I chondrules contain homogeneous forsterite grains that exhibit a negative correlation between FeO and CaO. Type II chondrules contain zoned fayalite olivines in which FeO is positively correlated with CaO and MnO. The isolated olivines in C3(0) chondrites form two compositional populations identical to olivines in the two types of porphyritic olivine chondrules in the same meteorites. Isolated olivines contain trapped melt inclusions similar in composition to glassy mesostasis between olivines in chondrules. Such glasses can be produced by fractional crystallization of olivine and minor spinel in the parent chondrule melts if plagioclase does not nucleate. The isolated olivine grains are apparently clastic fragments of chondrules. Some similarities between olivines in C3(0), C2, and Cl chondrites may suggest that olivine grains in all these meteorites crystallized from chondrule melts.     

Petrology and oxygen isotope compositions of chondrules in E3 chondrites

Chondrules in E3 chondrites differ from those in other chondrite groups. Many contain near-pure endmember enstatite (Fs_<1). Some contain Si-bearing FeNi metal, Cr-bearing troilite, and, in some cases Mg, Mn- and Ca-sulfides. Olivine and more FeO-rich pyroxene grains are present but much less common than in ordinary or carbonaceous chondrite chondrules. In some cases, the FeO-rich grains contain dusty inclusions of metal. The oxygen three-isotope ratios (δ¹⁸O, δ¹⁷O) of olivine and pyroxene in chondrules from E3 chondrites, which are measured using a multi-collection SIMS, show a wide range of values. Most enstatite data plots on the terrestrial fractionation (TF) line near whole rock values and some plot near the ordinary chondrite region on the 3-isotope diagram. Pyroxene with higher FeO contents (∼2-10 wt.% FeO) generally plots on the TF line similar to enstatite, suggesting it formed locally in the EC (enstatite chondrite) region and that oxidation/reduction conditions varied within the E3 chondrite chondrule-forming region. Olivine shows a wide range of correlated δ¹⁸O and δ¹⁷O values and data from two olivine-bearing chondrules form a slope ∼1 mixing line, which is approximately parallel to but distinct from the CCAM (carbonaceous chondrite anhydrous mixing) line. We refer to this as the ECM (enstatite chondrite mixing) line but it also may coincide with a line defined by chondrules from Acfer 094 referred to as the PCM (Primitive Chondrite Mineral) line (Ushikubo et al., 2011). The range of O isotope compositions and mixing behavior in E3 chondrules is similar to that in O and C chondrite groups, indicating similar chondrule-forming processes, solid-gas mixing and possibly similar ¹⁶O-rich precursors solids. However, E3 chondrules formed in a distinct oxygen reservoir.Internal oxygen isotope heterogeneity was found among minerals from some of the chondrules in E3 chondrites suggesting incomplete melting of the chondrules, survival of minerals from previous generations of chondrules, and chondrule recycling. Olivine, possibly a relict grain, in one chondrule has an R chondrite-like oxygen isotope composition and may indicate limited mixing of materials from other reservoirs. Calcium-aluminum-rich inclusions (CAIs) in E3 chondrites have petrologic characteristics and oxygen isotope ratios similar to those in other chondrite groups. However, chondrules from E3 chondrites differ markedly from those in other chondrite groups. From this we conclude that chondrule formation was a local event but CAIs may have all formed in one distinct place and time and were later redistributed to the various chondrule-forming and parent body accretion regions. This also implies that transport mechanisms were less active at the time of and following chondrule formation.     

Opaque phases in type-II chondrules from CR2 chondrites: Implications for CR parent body formation

We report the results of a detailed study of sulfide-bearing opaque assemblages from the MAC 87320, EET 92011, and Renazzo CR carbonaceous chondrites. The objectives of this study are to (1) characterize sulfide and associated phases within CR2 chondrites; (2) determine the petrographic relationship between sulfides, metals, and chondrules; (3) constrain the history of type-II chondrules; (4) ascertain the environments in which type-II chondrules formed and were altered; and (5) unravel the formation and alteration history of the CR parent body as recorded in sulfide-bearing assemblages. Sulfide-bearing opaque assemblages occur primarily within type-II (FeO-rich) chondrules. The sulfide assemblages are concentrated near the chondrule edges. Assemblages in MAC 87320 are composed of troilite, phosphate, and Ni-rich metal. EET 92011 contains assemblages composed of pentlandite, troilite, and Ni-rich metal. The assemblages in Renazzo contain tochilinite, magnetite, troilite, pentlandite, and phosphate. In all of the assemblages in Renazzo the tochilinite is fine grained and intimately mixed with troilite, pentlandite, or magnetite. Opaque assemblages in CR chondrites record a complex history that includes both high- and low-temperature processes. The morphology and composition of sulfides in CR2 chondrites suggests that the sulfide-bearing assemblages originally formed in gas-solid reactions in the nebula at temperatures above the Fe-FeS eutectic (988 °C). Many of the assemblages were subsequently aqueously altered on the CR-chondrite parent body to various degrees at temperatures from ∼50 to 200 °C. We combine these observations and interpretations to provide a detailed model of the history of the CR parent body.     

Formation processes of compound chondrules in CV3 carbonaceous chondrites: Constraints from oxygen isotope ratios and major element concentrations

We found thirty compound chondrules in two CV3 carbonaceous chondrites. The abundance in each meteorite relative to single chondrules is 29/1846 (1.6%) in Allende and 1/230 (0.4%) in Axtell. We examined petrologic features, major element concentrations and oxygen isotopic compositions. Textural, compositional and isotopic evidence suggests that multiple, different mechanisms are responsible for the formation of compound chondrules.Seven compound chondrules are composed of two conjoined porphyritic chondrules with a blurred boundary. At the boundary region of this type of compounds, a poikilitic texture is commonly observed. This suggests that the two chondrules were melted when they came to be in contact. On the other hand, seventeen compound chondrules consist of two conjoined chondrules with a discrete boundary. The preservation of spherical boundary planes of an earlier-formed chondrule of this type implies that it already solidified before fusing with a later-formed chondrule that was still melted. Six samples out of 17 compound chondrules of this type are composed of two BO chondrules. The BO-BO compound chondrules have a unique textural feature in common: the directions of the barred olivines are mostly parallel between two chondrules. This cannot be explained by a simple collision process and forces another mechanism to be taken into consideration.The remaining six compound chondrules differ from the others; they consist of an earlier-formed chondrule enclosed by a later-formed chondrule. A large FeO enrichment was observed in the later-formed chondrules and the enrichment was much greater than that in the later-formed chondrules of other types of compounds. This is consistent with the relict chondrule model, which envisages that the later-formed chondrule was made by a flash melting of a porous FeO-rich dust clump on an earlier-formed chondrule. The textural evidence of this type of compound shows that the earlier-formed chondrule has melted again to varying degrees at the second heating event. This implies that FeO concentrations in bulk chondrules increases during the second heating event if an earlier-formed chondrule was totally melted together with the FeO-rich dust aggregates.Silicate minerals such as olivine and low-Ca pyroxene in compound chondrules have oxygen isotope compositions similar to those in single chondrules from CV3 chondrites. The oxygen isotope composition of each part of the compound chondrule is basically similar to their chondrule pair, but silicates in some chondrules show varying degrees of ¹⁶O-enrichment down to −15‰ in δ¹⁸O, while those in their partners have ¹⁶O-poor invariable compositions near 0 ‰ in δ¹⁸O. This implies that the two chondrules in individual compounds formed in the same environments before they became conjoined and the heterogeneous oxygen isotope compositions in some chondrules resulted from incomplete exchange of oxygen atoms between ¹⁶O-rich chondrule melts and ¹⁶O-poor nebular gas.     

The formation of chondrules by open-system melting of nebular condensates

Experiments were conducted under canonical nebular conditions to see whether the chemical compositions of the various chondrule types can be derived from a single CI-like starting material by open-system melting and evaporation. Experimental charges, produced at 1580 °C and P_H2 of 1.31×10⁻⁵ atm over 1 to 18 hours, consisted of only two phases, porphyritic olivine crystals in glass. Sulfur, metallic-iron and alkalis were completely evaporated in the first minutes of the experiments and subsequently the main evaporating liquid oxides were FeO and SiO₂. Olivines from short runs (2-4 hours) have compositions of Fo₈₃-Fo₈₉, as in Type IIA chondrules, while longer experimental runs (12-18 hours) produce ∼Fo₉₉ olivine, similar to Type IA chondrules. The concentration of CaO in both olivine (up to 0.6 wt.%) and glass, and their Mg#, increased with increasing heating duration. Natural chondrules also show increasing CaO with decreasing S, alkalis, FeO and SiO₂. The similarities in bulk chemistry, mineralogy and textures between Type IIA and IA chondrules and the experimental charges demonstrate that these chondrules could have formed by the evaporation of CI precursors. The formation of silica-rich chondrules (IIB and IB) by evaporation requires a more pyroxene-rich precursor.Based on the FeO evaporation rates measured here, Type IIA and IA chondrules, were heated for at least ∼0.5 and ∼3.5 h, respectively, if formed at 1580 °C and P_H2 of 1.31×10⁻⁵ atm. Type II chondrules may have experienced higher cooling-rates and less evaporation than Type I.The experimental charges experienced free evaporation and exhibited heavy isotopic enrichments in silicon, as well as zero concentrations of S, Na and K, which are not observed in natural chondrules. However, experiments on potassium-rich melts at the same pressure but in closed capsules showed less evaporation of K, and less K isotopic mass fractionation, than expected as a function of decreasing cooling rate. Thus the environment in which chondrules formed is as important as the kinetic processes they experienced. If chondrule formation occurred under conditions in which evaporated gases remained in the vicinity of the residual melts, the extent of evaporation would be reduced and back reaction between the gas and the melt could contribute to the suppression of isotopic mass fractionation. Hence chondrule formation could have involved evaporative loss without Rayleigh fractionation. Volatile-rich Type II and volatile-poor Type I chondrules may have formed in domains with high and low chondrule concentrations, and high partial pressures of lithophile elements, respectively.     

The petrology of chondrules in the Hallingeberg meteorite

Petrographic study of 124 chondrules in the Hallingeberg (L-3) chondrite and electron probe microanalyses of olivine and low-Ca pyroxene in 96 of them reveal patterns of variation like those encountered previously in Sharps (H-3). Chondrule mineralogy, mineral composition, and the incidence of shock-related textures vary systematically with chondrule type. This fact and evidence of recrystallization in at least a fourth of the chondrules studied indicate that the pre-accretion histories of chondrules included complex and overlapping episodes of magmatic crystallization, burial, metamorphism and exhumation, in which impact shock was heavily involved. Data for Hallingeberg and Sharps suggest that orthopyroxene accompanies or replaces clinoenstatite in some chondrules and that its presence is due, in part at least, to pre-accretion recrystallization. A comparison of modes for chondrules in Sharps and Hallingeberg shows the former to contain more olivine, on the average, than the latter. It appears that the mean compositions of chondrules in H- and L-group chondrites reflect bulk chemical differences between the two groups, and that chondrule formation followed the siderophile fractionation which differentiated H-, L- and LL-group ordinary chondrites.     

Tetrad effects in REE abundance patterns of chondrules from CM meteorites: Implications for aqueous alteration on the CM parent asteroid

Lanthanide tetrad effect in bulk chondrules from two moderately altered CM chondrites, Murchison and Yamato-793321 (Y-793321), are reported for the first time. Twenty-three chondrules were petrographically characterized and analyzed for 10 rare earth elements (REE) and other trace and major elements (Ba, Sr, Rb, K, Ca, Mg and Fe) using the precise isotope dilution technique. The results indicate systematic depletion (several times) of alkali and alkaline earths compared to CV and CO chondrules. Most of the porphyritic olivine (8 PO) and olivine-pyroxene (4 POP), porphyritic and radial pyroxene (2 PP, 1 RP), and granular olivine (1 GO) chondrules show a light-REE (L-REE) depleted, heavy-REE (H-REE) smoothly fractionated pattern composed of four (upward convex) segments possessing a relatively large negative Eu anomaly (CI-normalized La/Sm, Lu/Er and Eu/Eu* ratios = 0.3-1: Eu*, normal value). On the other hand, all barred-olivine (5 BO) chondrules, a few PO and POP indicate almost a flat L-REE pattern. In addition, regardless of their textural types, nearly half of the chondrules have a variable degree of Ce and Yb anomalies, and/or L/H-REE discontinuity, which is similar to CV and CO chondrules. The observed L- and H-convex REE patterns accompanied with the negative Eu anomaly is the first known case for chondrules as well as meteoritic materials, but have been previously reported for geological samples such as sedimentary rocks, late stage igneous and metamorphic rocks, and are explained as the lanthanide tetrad effect, which plausibly results from fluid-rock interaction. We suggest that the marked REE fractionations occurred by the selective incorporation of L-, H-REEs and Eu into alteration products in the matrix during alteration processes on the CM parent body, but that the gas/solid REE fractionation characteristics established in the nebula have basically remained unchanged. We suggest that the tetrad effects observed here represent a new index of physico-chemical conditions of fluid-rock interactions prevalent on the CM parent body.     

Carbon-rich chondritic clast PV1 from the Plainview H-chondrite regolith breccia: Formation from H3 chondrite material by possible cometary impact

Chondritic clast PV1 from the Plainview H-chondrite regolith breccia is a subrounded, 5-mm-diameter unequilibrated chondritic fragment that contains 13 wt% C occurring mainly within irregularly shaped 30-400-μm-size opaque patches. The clast formed from H3 chondrite material as indicated by the mean apparent chondrule diameter (310 μm vs. ∼300 μm in H3 chondrites), the mean Mg-normalized refractory lithophile abundance ratio (1.00 ± 0.09×H), the previously determined O-isotopic composition (Δ¹⁷O = 0.66‰ vs. 0.68 ± 0.04‰ in H3 chondrites and 0.73 ± 0.09‰ in H4-6 chondrites), the heterogeneous olivine compositions in grain cores (with a minimum range of Fa1-19), and the presence of glass in some chondrules. Although the clast lacks the fine-grained, ferroan silicate matrix material present in type 3 ordinary chondrites, PV1 contains objects that appear to be recrystallized clumps of matrix material. Similarly, the apparent dearth of radial pyroxene and cryptocrystalline chondrules in PV1 is accounted for by the presence of some recrystallized fragments of these chondrule textural types. All of the chondrules in PV1 are interfused indicating that temperatures must have briefly reached ∼1100°C (the approximate solidus temperature of H-chondrite silicate). The most likely source of this heating was by an impact. Some metal was lost during impact heating as indicated by the moderately low abundance of metallic Fe-Ni in PV1 (∼14 wt%) compared to that in mean H chondrites (∼18 wt%). The carbon enrichment of the clast may have resulted from a second impact event, one involving a cometary projectile, possibly a Jupiter-family comet. As the clast cooled, it experienced hydrothermal alteration at low water/rock ratios as evidenced by the thick rims of ferroan olivine around low-FeO olivine cores. The C-rich chondritic clast was later incorporated into the H-chondrite parent-body regolith and extensively fractured and faulted.     

Petrography and oxygen isotopic compositions in refractory inclusions from CO chondrites

Fine-grained Ca-Al-rich inclusions (FGIs) in Yamato-81020 (CO3.0) and Kainsaz (CO3.1-CO3.2) chondrites have been studied by secondary ion mass spectrometry. The FGIs from Yamato-81020 consist of aggregates of hibonite, spinel, melilite, anorthite, diopside and olivine grains with no petrographic evidence of alteration. In contrast, the FGIs from Kainsaz commonly contain alteration products such as nepheline. From replacement textures and chemical compositions of altered and unaltered FGIs, we conclude that the alteration products formed by decomposition of melilite and anorthite. All phases in the Yamato-81020 FGIs are enriched in ¹⁶O, with δ^{17, 18}O = ∼−40‰ except for one FGI that experienced melting. Oxygen isotopic compositions of melilite, anorthite, some spinel and diopside in Kainsaz FGIs changed from δ^{17, 18}O = ∼−40‰ toward 0‰ by aqueous alteration. Alteration products in FGIs are depleted in ¹⁶O relative to primary phases, with δ^{17, 18}O = ∼0‰. These results show that FGIs in CO chondrites commonly had ¹⁶O-rich compositions in the solar nebula. The original ¹⁶O-rich FGIs were modified to ¹⁶O-poor compositions during aqueous alteration in the parent body.     

Microchondrule-bearing clast in the Piancaldoli LL3 meteorite: a new kind of type 3 chondrite and its relevance to the history of chondrules

In the Piancaldoli LL3 chondrite, we found a mm-sized clast containing ~100 chondrules 0.2–64 μm in apparent diameter (much smaller than any previously reported) that are all of the same textural type (radial pyroxene; FS_1–17). This clast, like other type 3 chondrites, has a fine-grained Ferich opaque silicate matrix, sharply defined chondrules, abundant low-Ca clinopyroxene and minor troilite and Si- and Cr-bearing metallic Fe,Ni. However, the very high modal matrix abundance (63 ± 8 vol. %), unique characteristics of the chondrules, and absence of microscopically-observable olivine indicate that the clast is a new kind of type 3 chondrite. Most chondrules have FeO-rich edges, and chondrule size is inversely correlated with chondrule-core FeO concentration (the first reported correlation of chondrule size and composition). Chondrules acquired Fe by diffusion from Fe-rich matrix material during mild metamorphism, possibly before final consolidation of the rock. Microchondrules (those chondrules ? 100 μm in diameter) are also abundant in another new kind of type 3 chondrite clast in the Rio Negro L chondrite regolith breccia. In other type 3 chondrite groups, microchondrule abundance appears to be anticorrelated with mean chondrule size, viz. 0.02–0.04 vol. % in H and CO chondrites and ?0.006 vol. % in L, LL, and CV chondrites.Microchondrules probably formed by the same process that formed normal-sized droplet chondrules: melting of pre-existing dustballs. Because most compound chondrules in the clast and other type 3 chondrites formed by collisions between chondrules of the same textural type, we suggest that dust grains were mineralogically sorted in the nebula before aggregating into dustballs. The sizes of compound chondrules and chondrule craters, which resulted from collisions of similarly-sized chondrules while they were plastic, indicate that size-sorting (of dustballs) occurred before chondrule formation, probably by aerodynamic processes in the nebula. We predict that other kinds of type 3 chondrites exist which contain chondrule abundances, size-ranges and proportions of textural types different from known chondrite groups.