Measurements of Beam Pattern Perturbation in Corrugated Feed Horn Arrays for CMB Observations

An experimental study on the perturbation of the angular response of a W-band corrugated horn produced by nearby feeds, reproducing a typical situation of multi-feed arrays commonly used in high sensitivity Cosmic Microwave Background instruments, is reported in this paper. The effects for different positions of the scattering horn in the two principal polarisation planes were measured. We analyze the effects on both the side-lobe level and on the main beam. In particular, these results allowed us to validate design criterion for the multi-frequency focal array of the ESA PLANCK mission.This revised version was published online in July 2005. The first author’s e-mail address was removed.     

Development of a new photon diffraction imaging system for diagnostic nuclear medicine

The objective of this project is to develop and construct an innovative imaging system for nuclear medicine and molecular imaging that uses photon diffraction and is capable of generating 1–2 mm spatial resolution images in two or three dimensions. The proposed imaging system would be capable of detecting radiopharmaceuticals that emit 100–200 keV gamma rays which are typically used in diagnostic nuclear medicine and in molecular imaging. The system is expected to be optimized for the 140.6 keV gamma ray from a Tc-99m source, which is frequently used in nuclear medicine. This new system will focus the incoming gamma rays in a manner analogous to a magnifying glass focusing sunlight into a small focal point on a detector's sensitive area. Focusing gamma rays through photon diffraction has already been demonstrated with the construction of a diffraction lens telescope for astrophysics and a scaled-down lens for medical imaging, both developed at Argonne National Laboratory (ANL). In addition, spatial resolutions of 3 mm have been achieved with a prototype medical lens. The proposed imaging system would be comprised of an array of photon diffraction lenses tuned to diffract a specific gamma ray energy (within 100–200 keV) emitted by a common source. The properties of photon diffraction make it possible to diffract only one specific gamma ray energy at a time, which significantly reduces scattering background. The system should be sufficiently sensitive to the detection of small concentrations of radioactivity that can reveal potential tumor sites at their initial stages of development. Moreover, the system's sensitivity would eliminate the need for re-injecting a patient with more radiopharmaceutical if this patient underwent a prior nuclear imaging scan. Detection of a tumor site at its inception could allow for an earlier initiation of treatment and wider treatment options, which can potentially improve the chances for cure.     

Development of solar scintillometer

The index of scintillation measurement is a good parameter to compare different sites for image quality or ‘seeing’. We have developed a scintillometer, which is deployed on the high resolution SPAR telescope in the island site of Udaipur Solar Observatory, for the site characterization to specify the proposed MAST (Multi Application Solar Telescope). The scintillometer consists of a miniature telescope, termed as micro telescope (4 mm aperture, 15 mm focal length) mounted on a drive which tracks the Sun continuously, associated amplifiers and a data acquisition system. A photodiode is used as the detector. The telescope along with detector was obtained from National Solar Observatory (NSO), and is similar to the one used for Advanced Technology Solar Telescope (ATST) site survey. At USO we developed the amplifier and data acquisition system for the scintillometer. A 24-bit analog to digital converter based system was designed, assembled, tested and used as the data acquisition system (DAS). In this paper, we discuss the instrumentation and present the initial results.     

A measurement of the cosmic microwave background temperature 1280 MHz

The absolute temperature of the cosmic microwave background (CMB) has been measured at a frequency of 1280 MHz. The observation was made with a modified version of the L-band receiver used in the Giant Metre wavelength Radio Telescope (GMRT): the feed horn was replaced by a corrugated plate and the receiver was placed on the ground, directed at zenith, and shielded from ground radiation by an aluminium screen with corrugated edges. Novel techniques have been adopted for

?reducing and cancelling unwanted contributions to the system temperature of the receiver and

?calibrating the contributions from the feed assembly and receiver.

The thermodynamic temperature of the CMB is estimated to be 3.45 ± 0.78 K.     

FASTL波段多波束馈源设计的初步分析

把抛物面天线的偏焦理论应用于FASTL波段多波束馈源系统的设计,分析了馈源喇叭横向偏焦距离与相应波束偏离角之间的关系,结合多波束射电望远镜扫描方式的要求,给出了FASTL波段多波束馈源的工作带宽、多波束馈源中相邻喇叭的间距以及喇叭口径大小的限制,并对正六边形阵列中处于不同位置的喇叭对应的波束的主瓣情况作了详细计算和分析。由此说明了FASTL波段多波束馈源采用19波束的可行性。另一方面,根据得到的工作频率带宽和喇叭口径大小的情况,对OMT和喇叭类型的选择进行了探讨。本文给出了FASTL波段多波束系统的大概轮廓,为进一步精确设计指明了方向。     

A modified algorithm for CLEANing wide-field maps with extended structures

A simple but effective modification to the conventional CLEAN algorithm is suggested. This modification ensures both stability and speed when CLEAN is applied to maps containing a mixture of point sources and extended structures. The method has been successfully applied to the recently-completed sky survey at 34.5 MHz (Dwarakanath & Udaya Shankar 1990). This survey was made using the Gauribidanur T array (GEETEE)1 in 1-D aperture synthesis mode. Since in this case the ‘dirty beam’ (point spread function) cannot be directly computed, a method to obtain this is discussed in detail. The results of this deconvolution procedure have been encouraging in terms of reduced computing time and improved dynamic range in our maps. This algorithm should find wider application in deconvolving maps which have both extended structures and point sources This telescope is jointly operated by the Indian Institute of Astrophysics, Bangalore & the Raman Research Institute, Bangalore.     

Optimal Compensation and Implementation for Adaptive Optics Systems

This paper develops a compensation algorithm based on Linear–Quadratic–Gaussian (LQG) control system design whose parameters are determined (in part) by a model of the atmosphere. The model for the atmosphere is based on the open-loop statistics of the atmosphere as observed by the wavefront sensor, and is identified from these using an auto-regressive, moving average (ARMA) model. The (LQG) control design is compared with an existing compensation algorithm for a simulation developed at ESO that represents the operation of MACAO adaptive optics system on the 8.2 m telescopes at Paranal, Chile. This revised version was published online in July 2006 with corrections to the Cover Date.     

A digital correlation receiver for the GEETEE radio telescope

A 128-channel digital correlation receiver has been built for the GEETEE 1, the low-frequency radio telescope situated at Gauribidanur, South India, (latitude 13°36′12′′ N). The receiver uses a modified doublesideband (DSB) technique. The quadrature samples required for a DSB system are obtained by sampling the digitized intermediate frequency (I.F.) signals by two clocks which are separated in time by one quarter of the period of the I.F. The visibilities required for one-dimensional synthesis are measured using one-bit correlators. A technique to measure amplitude information for the signal using a threshold detector and a one-bit correlator has been developed. The receiver has been successfully used for continuum, spectral-line and pulsar observations. The antenna system of GEETEE and its configuration for one dimensional synthesis are also described in this paper This telescope is jointly operated by the Indian Institute of Astrophysics, Bangalore and the Raman Research Institute, Bangalore.     

Implementation of an optimized Cassegrain system for radio telescopes

We present the antenna design for a radio interferometer, the Arcminute Microkelvin Imager, together with its beam pattern measurement. Our aim was to develop a low-cost system with high aperture efficiency and low ground spill across the frequency range 12–18 GHz. We use a modified Cassegrain system consisting of a commercially available paraboloidal primary mirror with a diameter of 3.7 m, and a shaped secondary mirror. The secondary mirror is oversized with respect to a ray optics design and has a surface that is bent towards the primary near its outer edge using a square term for the shaping. The antennas are simple to manufacture and therefore their cost is low. The design increased the antenna gain by approximately 10 per cent compared to a normal Cassegrain system while still maintaining low contamination from ground spill and using a simple design for the horn.     

Advanced Fresnel X-ray telescopes for spectroscopic imaging

We present an effective achromatic imaging technique for diffraction-limited X-ray telescopes. For a common focal length, independent optical sections of the aperture are dedicated to two or more spectral bands and optimized with respect to their efficiency. For this purpose, we introduce the “achromatic gain” of an X-ray hybrid lens. Large-scale segmented and nested apertures provide a promising implementation of that scheme. An optimized numerical example and astrophysical simulations prove its capabilities for an energy range between 6 and 16 keV.     

Markov stochastic technique to determine galactic cosmic ray sources distribution

A new numerical model of particle propagation in the Galaxy has been developed, which allows the study of cosmic-ray production and propagation in 2D. The model has been used to solve cosmic ray diffusive transport equation with a complete network of nuclear interactions using the time backward Markov stochastic process by tracing the particles’ trajectories starting from the Solar System back to their sources in the Galaxy. This paper describes a further development of the model to calculate the contribution of various galactic locations to the production of certain cosmic ray nuclei observed at the Solar System.     

The anatomy of a quadruply imaged gravitational lens system

The key to using a strong gravitational lens system to measure the Hubble constant is to obtain an accurate model of the lens potential. In this paper, we investigate the properties of gravitational lens B1608+656, a quadruply imaged lens system with an extended source intensity distribution. Our analysis is valid for generic quadruply lensed systems. Limit curves and isophotal separatrices are defined for such systems, and we show that the isophotal separatrices must intersect at the critical curves and the satellite isophotes must be tangent to the limit curves. The most recent model of B1608+656 by Koopmans et al. satisfies these criteria for some, but not all, of the isophotal separatrices within the observational uncertainty. We study a non-parametric method of potential reconstruction proposed by Blandford, Surpi & Kundic and demonstrate that although the method works in principle and elucidates image formation, the initial potential only converges to the true model when it is within ∼1 per cent of the true model.     

Meteor44 Video Meteor Photometry

Meteor44 is a software system developed at MSFC for the calibration and analysis of video meteor data. The photometric range of the (8 bit) video data is extended from a visual magnitude range of from 8 to 3 to from 8 to −8 for both meteors and stellar images using saturation compensation. Camera and lens specific saturation compensation coefficients are derived from artificial variable star laboratory measurements. Saturation compensation significantly increases the number of meteors with measured intensity and improves the estimation of meteoroid mass distribution. Astrometry is automated to determine each image's plate coefficient using appropriate star catalogs. The images are simultaneously intensity calibrated from the contained stars to determine the photon sensitivity and the saturation level referenced above the atmosphere. The camera's spectral response is used to compensate for stellar color index and typical meteor spectra in order to report meteor light curves in traditional visual magnitude units. Recent efforts include improved camera calibration procedures and long focal length "streak" meteor photometry. Meteor44 has been used to analyze data from the 2001, 2002 and 2003 MSFC Leonid observational campaigns as well as several lesser showers.     

SciMeasure Wavefront Sensor Cameras and their Application in the Palomar Adaptive Optics System

SciMeasure, in collaboration with Emory University and the Jet Propulsion Laboratory, has developed a very versatile CCD controller for use in adaptive optics, optical interferometry, and other applications requiring high-speed readout rates and/or low read noise. The overall architecture of this controller system will be discussed and its performance using both EEV CCD39 and MIT/LL CCID-19 detectors will be presented. This controller is used in the adaptive optics system, developed by JPL, for the 200′′ Hale telescope at Palomar Mountain. Early diffraction-limited science results, recently achieved by the AO system, are presented. We gratefully acknowledge the financial support of NASA through SBIR contracts NAS8–97195 and NAS8–98081. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spatial interferometry in the mid-infrared region

The potential of high-resolution spatial interferometry for detailed mapping and precision astrometry in the mid-infrared region, somewhat analogous to interferometry now done in the microwave region, is discussed from an instrumental point of view. Some results from a prototype system and from tests of atmospheric properties are given. The design of a more advanced two-telescope system now under construction is outlined. This involves movable telescopes of 1.65 m aperture and of high precision, using heterodyne detection of infrared in the 10 Μm atmospheric window.     

施密特望远镜的主光路导星系统

通过对施密特望远镜导星系统的研究,本文提出了一种新的主光路导星系统的设想。在这种导星系统中,引导星位于视场的中心,避免了由于大气较差折射引起视场尺度变化对导星精度的影响。这种导星系统的另一个显著优点是不需要任何运动机件来搜索所需的引导星,从而使导星系统结构简化。文章还对导星系统相关的其它问题进行了讨论。     

The Solar Optical Telescope of Solar-B (Hinode): The Optical Telescope Assembly

The Solar Optical Telescope (SOT) aboard the Solar-B satellite (Hinode) is designed to perform high-precision photometric and polarimetric observations of the Sun in visible light spectra (388 – 668 nm) with a spatial resolution of 0.2 – 0.3 arcsec. The SOT consists of two optically separable components: the Optical Telescope Assembly (OTA), consisting of a 50-cm aperture Gregorian with a collimating lens unit and an active tip-tilt mirror, and an accompanying Focal Plane Package (FPP), housing two filtergraphs and a spectro-polarimeter. The optomechanical and optothermal performance of the OTA is crucial to attain unprecedented high-quality solar observations. We describe in detail the instrument design and expected stable diffraction-limited on-orbit performance of the OTA, the largest state-of-the-art solar telescope yet flown in space.     

New Criterion for Lunar Crescent Visibility

A new criterion for lunar crescent visibility has been established using 737 observations, almost half of them obtained by the Islamic Crescent Observation Project (ICOP). This criterion is based on two variables, viz. the topocentric arc of vision and the topocentric crescent width. The new model is able to predict the visibility of the lunar crescent both for naked eye and optically aided observations. From the database we found a Danjon limit of 6.4 degrees. Vice-President of “Crescents, Calendars and Mawaqeet Committee” of AUASS.     

Colour change measurements of gravitational microlensing events by using the difference image analysis method

Detecting colour changes of a gravitational microlensing event induced by the limb-darkened extended source effect is important for obtaining useful information about both the lens and the source star. However, precise measurements of the colour changes are hampered by blending, which also causes colour changes of the event. In this paper, we show that although the colour change measured from the subtracted image by using the recently developed photometric method of the 'difference image analysis' (DIA) differs from the colour change measured by using the conventional method based on the extraction of the individual source stars' point spread functions, the curve of the colour changes (colour curve) constructed by using the DIA method enables one to obtain the same information about the lens and source star, but with significantly reduced uncertainties due to the absence of blending. We investigate the patterns of the DIA colour curves for both single lens and binary lens events by constructing colour change maps.     

Modelling the 10-image lensed system B1933+503

A gravitational lens model is presented for the newly discovered 10-image system B1933+503. The underlying object, revealed by modelling, is a triple radio source on the scale of a couple of hundred mas that is well-aligned along the line of sight with a foreground and somewhat flattened lensing galaxy, the orientation and location of which match those of an observed galaxy, known to be at a redshift of 0.755. Uncertainties in the modelling are obtained by a Monte Carlo exercise. Observational tests of the lens model are proposed, and the time delays between various pairs of images are determined, as the core of the source is known to be significantly variable. Future observations of the lens hold the key to using B1933+503 to constrain Hubble's constant. Despite the absence of a source redshift, the utility of the system as a probe of the structure of the lens galaxy is unparalleled as it provides a surfeit of easily identifiable constraints for modelling the system.