Evidence of a Convective Boundary Layer Developingon the Antarctic Plateau during the Summer

Summary The development of a convective boundary layer over the Antarctic Plateau is documented by a Doppler minisodar data-set recorded during a 10 day campaign in January 1997. The vertical velocities associated with thermals do not exceed 1 m/s, while the depth of the convective layer, usually less than 200 m, never surpasses 300 m. Measurements of momentum flux, sensible heat flux, wind speed and radiation budget show characteristics that are typical of a convective boundary layer evolution. The diurnal behaviour of absolute humidity, however, exhibits features that are not expected, e.g. anticorrelation with incoming net radiation and air temperature. Received October 30, 1998 Revised May 26, 1999     

Response of neutral boundary layers to changes of roughness

When air blows across a change in surface roughness, an internal boundary layer (IBL) develops within which the wind adapts to the new surface. This process is well described for short fetches, > 1 km. However, few data exist for large fetches on how the IBL grows to become a new equilibrium boundary layer where again the drag laws can be used to estimate the surface wind.To study this problem, data have been sampled for two years from four 30-m meteorological masts placed from 0 to 30 km inland from the North Sea coast of Jutland in Denmark. The present analysis is limited to neutral stratification, and the surface roughness is the main parameter. The analysis of wind data and two simple models, a surface layer and a planetary boundary layer (PBL) model, are described.Results from both models are discussed and compared with data analysis. Model parameters have been evaluated and the model sensitivity to those parameters has been investigated. Using the model parameters, a large-scale roughness length has been estimated.Istituto Di Fisica dell' Atmosfera I.F.A. — CNR, Rome, Italy.     

论塔层风 、温廓线

本文改进了Zilitinkevich的工作,得到在塔层内动力学上合理的风廓线.并近似推求了不稳定层结下边界层高度h的表达式,使风、温廓线能用于不同层结.由近地层理论从近地层风、温求出通量后,即可推求塔层风、温分布.325m气象塔资料证明这一廓线达到一定的精度.     

2009年6月一次飑线过程灾害性大风的形成机制

对2009年6月3～4日一次产生地面大风的人字形强飑线过程进行了观测资料分析和数值模拟研究。观测资料的分析表明: 人字形回波系统的右半支的结构与一般的飑线系统类似, 在系统成熟阶段地面存在明显的雷暴高压、 冷池、 出流边界、 尾流低压等特征; 人字形回波的左半支对应的地面风速比右半分支弱, 且强对流区后部没有对应层状云、 地面雷暴高压、 冷池等; 灾害性大风的产生主要由这个人字形系统的右半支造成的。高分辨率模拟结果的分析表明: 系统由线状转变为人字形系统的原因是由于气旋扰动的冷暖切变的作用, 冷、 暖切变上分别形成了有层状云和无层状云的飑线分支。系统的右半分支在发展阶段和成熟阶段对流区有比较强烈的下沉气流, 系统的后部的中层入流可能会加强这个下沉气流。中层入流是地面大风形成的重要原因之一; 成熟阶段垂直于飑线系统主要有三股气流, 包括从飑线前部向后的入流和中层从后部到前部的入流, 以及前部的低层入流到高层的出流。     

Boundary-layer wind structure in a landfalling tropical cyclone

In this study, a slab boundary layer model with a constant depth is used to analyze the boundary-layer wind structure in a landfalling tropical cyclone. Asymmetry is found in both the tangential and radial components of horizontal wind in the tropical cyclone boundary layer at landfall. For a steady tropical cyclone on a straight coastline at landfall, the magnitude of the radial component is greater in the offshoreflow side and the tangential component is greater over the sea, slightly offshore, therefore the greater total wind speed occurs in the offshore-flow side over the sea. The budget analysis suggests that： （1） a greater surface friction over land produces a greater inflow and the nonlinear effect advects the maximum inflow downstream, and （2） a smaller surface friction over the sea makes the decrease of the tangential wind component less than that over land. Moreover, the boundary layer wind structures in a tropical cyclone are related to the locations of the tropical cyclone relative to the coastline due to the different surface frictions. During tropical cyclone landfall, the impact of rough terrain on the cyclone increases, so the magnitude of the radial component of wind speed increases in the offshore-flow side and the tangential component outside the radius of maximum wind speed decreases gradually.     

Wind regime in the lower atmosphere over Moscow from the long-term acoustic sounding data

Presented are the results of the sounding of the lower atmospheric 500-meter layer for the period of 2004–2012 carried out at the Meteorological Observatory of the Moscow State University (MSU) with the MODOS Doppler acoustic radar (sodar) produced by METEK (Germany). Discussed is the methodological basis of the sodar wind data analysis. It is demonstrated that in the air layer up to 200 m the maximum values in the annual course of the wind speed are observed more often in autumn and winter, and the minimum values, in summer; this is associated with the fact that during the cold period of the year Moscow is often located in the zones of intense gradient currents. The diurnal course of the wind speed is characterized by the daytime maximum and night-time minimum in the layer up to 40–60 m from the surface; it is poorly pronounced and characterized by the minimum in the morning in the layer of 80–120 m; and the daytime minimum and night-time maximum are observed above 140–160 m. The layer from 80 to 120 m approximately corresponds to the height of the wind rotation. The amplitude of diurnal variations of the wind speed increases from 0.3 m/s at the height of 7 m and 0.6 m/s at the height of 15 m, to 4.5 m/s at the height of 400 m; however, its secondary minimum (0.5 m/s) associated with the rotation height is registered at the altitude of 80 m. The statistical relationship between the wind speed and surface air temperature is direct during the cold season, inverse during the warm season, and is absent in April and October. The average maximum wind speed over Moscow for ten minutes in the layer up to 500 m from the surface reaches 30–35 m/s in some cases if two conditions concur: the capital is located on the periphery of vast pressure formations (usually of deep cyclones) and the local low-level jet stream is present in the wind profile.     

Entrainment Processes in the Convective Boundary Layer with Varying Wind Shear

Large-eddy simulations (LES) are performed to investigate the entrainment andthe structure of the inversion layer of the convective boundary layer (CBL) withvarying wind shears. Three CBLs are generated with the constant surface kinematicheat flux of 0.05 K m s^-1 and varying geostrophic wind speeds from 5 to 15m s^-1. Heat flux profiles show that the maximum entrainment heat flux as afraction of the surface heat flux increases from 0.13 to 0.30 in magnitude withincreasing wind shear. The thickness of the entrainment layer, relative to the depthof the well-mixed layer, increases substantially from 0.36 to 0.73 with increasingwind shear. The identification of vortices and extensive flow visualizations nearthe entrainment layer show that concentrated vortices perpendicular to the meanboundary-layer wind direction are identified in the capping inversion layer for thecase of strong wind shear. These vortices are found to develop along the mean winddirections over strong updrafts, which are generated by convective rolls and to appearas large-scale wavy motions similar to billows generated by the Kelvin–Helmholtzinstability. Quadrant analysis of the heat flux shows that in the case of strong windshear, large fluctuations of temperature and vertical velocity generated by largeamplitude wavy motions result in greater heat flux at each quadrant than that inthe weak wind shear case.     

A boundary-layer analysis of atmospheric motion over a semi-elliptical surface obstruction

Flow over surface obstructions can produce significantly large wind shears such that adverse flying conditions can occur for aeronautical systems (helicopters, V/STOL vehicles, etc.). The purpose of this analysis is to determine the kinds of flow fields that can result from surface obstructions in an otherwise horizontally homogeneous statistically stationary flow. The technique is based on the boundary-layer/Boussinesq-approximated equations of motion. The pressure gradient resulting from the surface obstruction is that consistent with a potential flow over a two-dimensional cylinder with elliptical cross-section, an approach commonly used for boundary-layer analyses in the engineering community. The dissipative effects of atmospheric turbulence on the mean flow are represented with eddy-viscosity models of the Reynolds stresses. The upstream flow is a neutral one and is characterized by a logarithmic profile for the mean wind. The following conclusions result from the analysis: (1) localized maxima in wind speed occur at the top of a surface obstruction, which are expected in physically real flow situations, (2) an increase in the elliptical aspect ratio decreases the wind speed within the boundary layer at the top of the ellipse and returns it to the logarithmic distribution characteristic of undisturbed flow, (3) increases in surface roughness affect the flow by decreasing the velocity in the boundary layer, with the most pronounced effect occurring near the surface of the smaller aspect-ratio ellipse, (4) Reynolds number has a negligible effect on the overall flow for the range of Reynolds numbers considered in this study, (5) a decrease in the elliptical aspect ratio and an increase in the surface roughness cause larger separation regions.     

Analysis of Model Results for the Turning of the Wind and Related Momentum Fluxes in the Stable Boundary Layer

The turning of wind with height and the related cross-isobaric (ageostrophic) flow in the thermally stable stratified boundary layer is analysed from a variety of model results acquired in the first Global Energy and Water Cycle Experiment (GEWEX) Atmospheric Boundary Layer Study (GABLS1). From the governing equations in this particular simple case it becomes clear that the cross-isobaric flow is solely determined by the surface turbulent stress in the direction of the geostrophic wind for the quasi-steady state conditions under consideration. Most models indeed seem to approach this relationship but for very different absolute values. Because turbulence closures used in operational models typically tend to give too deep a boundary layer, the integrated total cross-isobaric mass flux is up to three times that given by research numerical models and large-eddy simulation. In addition, the angle between the surface and the geostrophic wind is typically too low, which has important implications for the representation of the larger-scale flow. It appears that some models provide inconsistent results for the surface angle and the momentum flux profile, and when the results from these models are removed from the analysis, the remaining ten models do show a unique relationship between the boundary-layer depth and the surface angle, consistent with the theory given. The present results also imply that it is beneficial to locate the first model level rather close to the surface for a proper representation of the turning of wind with height in the stable boundary layer.     

DYNAMICAL CHARACTERISTICS OF THE STREAM FIELD OF COLD FRONT IN BOUNDARY LAYER

The motion equation of atmospheric boundary layer with cold front surface under geostrophicmomentum approximation is solved and some characteristics of the stream field for the cold frontsurface in the boundary layer are derived,for example,the slope of the cold front surface increaseswith the increases of geostrophic vorticity and the temporal tendency of geostrophic wind speed,and also increases with the decrease of the component of thermal wind speed along the motiondirection of the front:the stream field above and below the cold front surface in the boundary layerdepends on the slope of the front surface,geostrophic wind speed and its temporal and spatialdistributions.A common characteristic is that there exist updraft motion above the cold frontsurface and downdraft motion below it.     

Long–term Variations in Wind Speed in the Atmospheric Layer of 0–2 km over the Russian Arctic from Radiosonde Data for 1964–2016

The results of the analysis of statistical characteristics for wind speed are presented for the lower 2–km atmospheric layer over the Russian Arctic. The calculations are based on radiosonde data for the observation period of 1964–2016. The data passed the procedure of complex control of quality and the procedure of quality control specially developed for the atmospheric layer of 0–2 km. The Akima cubic spline interpolation is used for computing wind speed. The trends are estimated using the classic method. It is shown that the spatiotemporal distribution of the trends is not uniform. Wind speed and its standard deviations in the analyzed layer over the Arctic mainly increase in the layer of 400–800 m above the surface.     

Study on Physical Mechanism of Influence on Atmospheric Boundary Layer Depth in the Arid Regions of Northwest China

Using the sounding data of wind, temperature, and humidity in the boundary layer and micrometeorological data on the earth's surface observed in the same period in Dunhuang arid region of Northwest China,this paper researches characteristics of potential temperature, wind, and humidity profiles, confirms the structure and depth of thermodynamic boundary layer in Dunhuang region, and analyzses the relationship of depth of thermodynamic boundary layer with surface radiation, buoyancy flux as well as wind speed and wind direction shear in the boundary layer. The results show that the maximum depth of diurnal convective boundary layer is basically above 2000 m during the observational period, many times even in excess of 3000 m and sometimes up to 4000 m; the depth of nocturnal stable boundary layer basically maintains within a range of 1000-1500 m. As a whole, the depth of atmospheric boundary layer is obviously bigger than those results observed in other regions before. By analyzing, a preliminary judgement is that the depth of atmospheric thermodynamic boundary layer in Dunhuang region may relate to local especial radiation characteristics, surface properties (soil moisture content and heat capacity) as well as wind velocity shear of boundary layer, and these properties have formed strong buoyancy flux and dynamic forcing in a local region which are fundamental causes for producing a super deep atmospheric boundary layer.     

DYNAMICAL CHARACTERISTICS OF THE STREAM FIELD OF COLD FRONT IN BOUNDARY LAYER*

The motion equation of atmospheric boundary layer with cold front surface under geostrophic momentum approximation is solved and some characteristics of the stream field for the cold front surface in the boundary layer are derived,for example,the slope of the cold front surface increases with the increases of geostrophic vorticity and the temporal tendency of geostrophic wind speed,and also increases with the decrease of the component of thermal wind speed along the motion direction of the front:the stream field above and below the cold front surface in the boundary layer depends on the slope of the front surface,geostrophic wind speed and its temporal and spatial distributions.A common characteristic is that there exist updraft motion above the cold front surface and downdraft motion below it.     

Observations of the barotropic Ekman layer over an urban terrain

Data from low-level soundings over Cambridge, U.S.A. were selected on the basis of an Ekman-like variation of the wind vector with altitude combined with evidence of a barotropic atmosphere. The method of geostrophic departure was used to determine the shear-stress distribution. The analysis yields the dimensionless properties of the barotropic Ekman layer under neutral and stable stratification. Some important results include: the geostrophic drag coefficient displays no dependence on the degree of static stability; the dimensionless height of the boundary layer decreases with increasing stability in agreement with the prediction of Zilitinkevich; the properties of the urban surface layer, where the roughness elements are multistory buildings, show no dependence on atmospheric stability under the moderate wind conditions which display the Ekman-like wind profile; and the directions of the horizontal shear stress and the vertical derivative of the velocity vector usually tend to be parallel only near the surface layer. Values of the two constants of the Rossby number similarity theory are found for the neutral barotropic Ekman layer at a surface Rossby number equal to 2 × 10⁵. The implications of the work with respect to wind-tunnel simulation of the flow over models of urban areas are discussed.     

The position of the lowest levels in the boundary layer of atmospheric circulation models

Abstract

The error associated with the position of the lowest wind level in atmospheric boundary‐layer modelling is studied in connection with vertical resolutions typical of parametrization schemes for atmospheric circulation models. The test case is the neutrally stratified steady‐state boundary layer. Finite‐difference and finite‐element schemes of two types are used: in one case the lowest wind level is centred with respect to the surface and the lowest internal level where the shear stress is calculated, in the other case the lowest wind level is set very close to the surface (5 m). It is found that schemes of the latter type underestimate the friction force at the lowest level and consequently overestimate the wind and the surface stress. This error is largest at low resolution since it is due to the uncentring of the lowest wind level with respect to the stress levels. The error in schemes of the former type is different, and is associated with the determination of the surface stress from a wind at a height that may exceed the extent of the surface layer. For all neutral cases, this error can be made small by adding a corrective term to the traditional logarithmic formulation. This paper shows that considerably more error is generated by uncentred differencing than by deepening the surface layer.     

Structures and characteristics of the windy atmospheric boundary layer in the South China Sea region during cold surges

An observational analysis of the structures and characteristics of a windy atmospheric boundary layer during a cold air outbreak in the South China Sea region is reported in this paper. It is found that the main structures and characteristics are the same as during strong wind episodes with cold air outbreaks on land. The high frequency turbulent fluctuations(period<1 min) are nearly random and isotropic with weak coherency, but the gusty wind disturbances(1 min相似文献   

Vorticity,divergence, and vertical velocity in a baroclinic boundary layer with a linear variation of the geostrophic wind

The Ekman-Taylor problem for the planetary boundary layer is solved in the case of a thermal wind which varies linearly with height. The upper boundary condition is a vanishing ageostrophic wind, while the lower boundary condition is continuity of the stress vector across the interface between the planetary boundary layer and the surface layer. The latter condition is used to determine the magnitude and the direction of the wind at the bottom of the Ekman layer.Theoretical hodographs are compared with observed hodographs based on five years of ohservations from Ship N in the Pacific, giving fair agreement.The divergence, the vorticity, and the vertical velocity are calculated through the Ekman layer with emphasis on differences between the classical barotropic and the baroclinic cases; these differences are significant, especially in the vertical velocities as compared to the standard approximation.An extension of the present study to include thermal stratification is desirable.     

0679香山局地大暴雨的中小尺度天气分析

利用Doppler雷达、地面自动站、Profile垂直风廓线及GPS水汽分布等多种新型探测资料, 对2006年7月9日夜间发生在北京西郊香山附近的局地大暴雨天气的影响系统和γ-中尺度强降雨落区形成的动力机理进行了精细分析。对雷达等本地多种探测资料的精细研究表明:地形辐合回波带是造成这次过程的主要影响系统。地形辐合回波带上中气旋回波块的滚动更迭是大暴雨落区形成的直接原因; 近地面辐合对大暴雨落区强降雨的发生具有重要作用。大暴雨落区形成阶段近地面3种辐合同时存在:平原东南风与山区偏北风风向切变辐合、平原东南风在山脉阻挡作用下的抬升辐合、大暴雨落区中心的γ-中尺度气旋性辐合。研究还表明:山前近地面地形辐合扰动, 向上传播, 引发边界层扰动的动力过程是香山大暴雨落区形成的主要动力源, 而来自东南方向近地面层的暖湿平流为大暴雨提供了有效的水汽和能量。     

Use of a High-Resolution Sodar to Study Surface-layer Turbulence at Night

Measurements in the atmospheric surface layer are generally made with point sensors located in the first few tens of metres. In most cases, however, these measurements are not representative of the whole surface layer. Standard Doppler sodars allow a continuous display of the turbulent thermal structure and wind profiles in the boundary layer up to 1000 m, with a few points, if any, in the surface layer. To overcome these limitations a new sodar configuration is proposed that allows for a higher resolution in the surface layer. Because of its capabilities (echo recording starting at 2 m, echo intensity vertical resolution of approximately 2 m, temporal resolution of 1 s) this sodar is called the surface-layer mini-sodar (SLM-sodar). Features and capabilities of the SLM-sodar are described and compared with the sodar. The comparison of the thermal vertical structure given by the SLM-sodar and the sodar provides evidence that, in most cases, the surface layer presents a level of complexity comparable to that of the entire boundary layer. Considering its high vertical resolution, the SLM-sodar is a promising system for the study of the nocturnal surface layer. The nocturnal SLM-sodar measurements have shown that, depending on wind speed, the structure of the surface layer may change substantially within a short time period. At night, when the wind speed is greater than 3 m s⁻¹, mechanical mixing destroys the wavy structure present in the nocturnal layer. Sonic anemometer measurements have shown that, in such cases, also the sensible heat flux varies with height, reaching a peak in correspondence with the wind speed peak. Under these conditions the assumption of horizontal homogeneity of the surface layer and the choice of the averaging time need to be carefully treated.     

北京地区夏季边界层结构日变化的高分辨模拟对比

使用WRF中尺度数值模式, 分别选用两种不同的边界层参数化方案 (MYJ, YSU) 和3种陆面参数化方案 (SLAB, Noah, RUC), 对2004年7月1日08:00—7月4日20:00 (北京时) 北京地区夏季边界层结构进行1 km的高分辨模拟。对比分析了近地面层风场、温度场以及边界层的日变化特征, 结果发现:WRF模式基本模拟出了北京夏季边界层的日变化特征; 在边界层方案中, MYJ方案描述的边界层结构较YSU方案合理; Noah陆面模式较好地反映了城市的热岛效应; 无降水时, 风速及边界层高度对于陆面过程不敏感, 而降水发生后, 陆面过程对于边界层结构的影响增大; 各方案模拟的城区风速明显偏大, 这是因为没有充分考虑城市建筑物的阻力作用。