Crustal accretion and reworking processes of micro-continental massifs within orogenic belt: A case study of the Erguna Massif,NE China

This paper summarizes the geochronological, geochemical and zircon Hf isotopic data for Mesozoic granitoids within the Erguna Massif, NE China, and discusses the spatial-temporal variation of zircon Hf isotopic compositions, with the aim of constraining the accretion and reworking processes of continental crust within the Erguna Massif, and shedding light on the crustal evolution of the eastern segment of the Central Asian Orogenic Belt. Based on the zircon U-Pb dating results, the Mesozoic granitic magmatisms within the Erguna Massif can be subdivided into five stages: Early-Middle Triassic(249–237 Ma), Late Triassic(229–201 Ma), Early-Middle Jurassic(199–171 Ma), Late Jurassic(155–149 Ma), and Early Cretaceous(145–125 Ma).The Triassic to Early-Middle Jurassic granitoids are mainly I-type granites and minor adakitic rocks, whereas the Late Jurassic to Early Cretaceous granitoids are mainly A-type granites. This change in magmatism is consistent with the southward subduction of the Mongol-Okhotsk oceanic plate and subsequent collision and crustal thickening, followed by post-collision extension. Zircon Hf isotopic data indicate that crustal accretion of the Erguna Massif occurred in the Mesoproterozoic and Neoproterozoic. ZirconεHf(t) values increase gradually over time, whereas two-stage model(TDM2) ages decrease throughout the Mesozoic. The latter result indicates a change in the source of granitic magmas from the melting of ancient crust to more juvenile crust. Zircon εHf(t)values also exhibit spatial variations, with values decreasing northwards, whereas TDM2 ages increase. This pattern suggests that,moving from south to north, there is an increasing component of ancient crustal material within the lower continental crust of the Erguna Massif. Even if at the same latitude, the zircon Hf isotopic compositions are also inconsistent. These results reveal lateral and vertical heterogeneities in the lower continental crust of the Erguna Massif during the Mesozoic, which we use as the basis of a structural and tectonic model for this region.     

Episodic crustal growth and reworking at the southeastern margin of the North China Craton: evidence from zircon U–Pb and Lu–Hf isotopes of Archean tonalite–trondhjemite–granodiorite gneisses in the Bengbu-Wuhe area

The cratonization history of the North China Craton(NCC) and the nature of tectonothermal events are still highly controversial. Tonalite-trondhjemite-granodiorite(TTG) gneisses, as the dominant lithological assemblages in Archean metamorphic terranes, can provide significant clues to the magmatic and metamorphic evolution of Precambrian crust. This study presents zircon laser-ablation inductively-coupled-plasma mass spectrometry U–Pb ages, trace-element, and in-situ LA-MC-ICPMS zircon Hf isotope data for the TTG gneisses from the Bengbu-Wuhe area on the southeastern margin of the NCC.Cathodoluminescence images and trace elements indicated that magmatic zircons display the characteristics of euhedral-subhedral crystals with oscillatory growth zoning structures, high RREE contents, marked Ce positive anomalies, and Pr–Eu negative anomalies. The metamorphic zircons display the spherical-oval crystals with distinct core-rim structures, high and homogeneous luminescent intensity, lower RREE, Nb, Ta, Hf contents,relative flat REE patterns, weak Ce positive anomalies, and Pr-Eu negative anomalies. The Ti–in–zircon geothermometer data indicate that the crystallization temperature of the TTG gneiss ranged from 754 to 868 ℃. Zircon U–Pb ages indicate that the TTG gneisses formed at 2.79–2.77 Ga and 2.50 Ga and underwent metamorphism at 2.57–2.52 Ga. The Hf isotopic data indicate that the magmatic zircons exhibit high, positive eHf(t) values close to those of the coeval depleted mantle, whereas the metamorphic zircons exhibit negative or nil eHf(t) values. This implies that the TTG gneisses were derived from the partial melting of the ～ 2.9–2.6 Ga juvenile crustal sources mixed with ～ 3.0–2.8 Ga ancient crustal materials.Combined with the regional tectonic evolution, we propose that the metamorphic basement at the southeastern margin of the NCC underwent episodic crustal growth at ～ 2.7 and ～ 2.5 Ga and subsequently underwent crustal reworking or re-melting of the ancient crust during the Neoarchean. The Neoarchean TTG gneisses might have been derived from the partial melting of lower crustal materials related to plate subduction.     

Crustal structure beneath Qiangtang and Lhasa terrane from receiver function

To determine the crustal structure in central Tibet, we used teleseismic waveform data recorded by 18 stations in the INDEPTH-Ⅲ seismic array across the central Tibet from the central Lhasa terrane to the central Qiangtang terrane. The S-wave velocity structures beneath stations are determined by inverting the stacked radial receiver function using the GA method. The first order features in the receiver function are modeled. Our results show that the Moho in Qiangtang is about 8 km shallower than that in Lhasa terrane along the INDEPTH-Ⅲ profile. It maybe suggests the northward subduction of the Lhasa mantle lid beneath the Qiangtang terrane is affected by the India-Asia collision. We conclude that there exist low velocity zone in the middle crust across the northern Lhasa and Qiangtang terrane, which can be related to the high temperature upper mantle beneath that.     

Geophysical evidence for thrusting of crustal materials from orogenic belts over both sides of the Yangtze Block and its geological significance

Based on deep geophysical detections, we have reconstructed the crustal structure from the eastern margin of the Tibetan Plateau to the Jiangnan-Xuefeng orogenic belt. The results suggest that the Yangtze Block was overthrusted by crustal materials in its NW direction from the eastern Tibetan Plateau but in its SE direction from the Jiangnan orogen. These overthrusting effects control the crustal structure from the western Sichuan to the western area of the Jiangnan orogen-Xuefeng orogenic belt. The eastward extruded materials from the eastern Tibetan Plateau were blocked by the rigid basement in the Sichuan Basin, where upper-middle crust was overthrusted whereas the lower crust was underthrusted beneath the Sichuan Basin. The underthrusted unit was absorbed by crustal folding, shortening and thickening in the Yangtze Block, forming the Xiongpo and Longquan Mountains tectonic belts and resulting in the NW-directed thrusting of the Pujiang-Chengdu-Deyang fault, and the western hillsiden fault in the Longquan Mountain. These results provide resolution to the controversy where the eastward extrusion material from the Qinghai-Tibet Plateau had gone. Overall, that Yangtze Block was subjected to thrusting of the crustal materials from the orogenic belts over its both sides. This finding has implications for the study of the intracontinental orogenic mechanism in South China, the reconstruction of tectonic evolutionary history and the kinematics processes during the lateral extrusion of the Tibet Plateau.     

SHRIMP U-Pb dating and Hf isotopic analyses of Middle Ordovician meta-cumulate gabbro in central Qiangtang, northern Tibetan Plateau

Metabasites consisting of metamorphic ultra-mafic rocks, cumulate gabbro, gabbro (diabase), basalt, and plagiogranite are exposed at the Taoxinghu area in central Qiangtang, northern Tibetan Plateau. Zircon SHRIMP U-Pb dating for the cumulate gabbro yields a weighted mean age of 467±4 Ma, which is the oldest and most reliable magmatic age in this area. Zircon 176Hf/177Hf ratios range from 0.282615 to 0.282657, with εHf(t) values of 5.02±0.28, indicating that the cumulate gabbro was mainly derived from the depleted mantle. In addition, geochemical data of metabasites suggest that they have similar characteristics to those in the mid-ocean ridge basalts (MORB). The Taoxinghu metabasites may represent the fragment of Early Paleozoic ophiolite in the "Central Uplift" of the Qiangtang, northern Tibetan Plateau.     

Zircon U–Pb age and geochemical constraints on the origin and tectonic implication of the Tuotuohe Cenozoic alkaline magmatism in Qinghai–Tibet Plateau

A large number of Eocene-Oligocene alkaline/alkali-rich igneous rocks were developed in the Tuotuohe region of the Qinghai-Tibetan Plateau.In this study,we present zircon U-Pb ages,Hf isotope data,and major and trace element compositions of the Cenozoic alkaline rocks from the Tuotuohe region in order to constraint the petrogenesis and tectonic evolution history of Qiangtang Block.Zircon U-Pb ages were measured via LA-ICP-MS to be39.6,37.6 and 32.0 Ma.The 39.6 Ma trachyte was characterized by low SiO2 and high K2O and MgO contents.The 37.6 and 32.0 Ma orthophyres show enrichment in SiO2 and K2O,but deficient in MgO.All of the samples belong to the alkaline rocks.These rocks display enrichment in REE,LREE,and LILE,depletion in HFSE,and no obvious Eu anomalies.Geological and geochemical features suggest that there were two possible mechanisms for the origin of the alkaline rocks in the Tuotuohe region:(1)the removed mafic lower crust dropped into the asthenosphere,forming the mix magma(Nariniya trachyte);(2)the upwelling asthenosphere triggered the crustal melting(Nariniya and Zamaqu orthophyre).The Eocene-Oligocene alkaline rocks in the study and adjacent areas are likely to be the result of the same tectonic-magmatic event of deep lithospheric evolution that is the crustal material melting triggered by lithospheric delamination.This conclusion extends the influence scope of lithospheric delamination eastward to the Tuotuohe region(*92°E)from Banda Co(*82°E).     

Crustal structure of seismic velocity in southern Tibet and east-westward escape of the crustal material——An example by wide-angle seismic profile from Peigu Tso to Pumoyong Tso

The Tibetan plateau, which results from continu- ous collision between India continent and southern Eurasia continent, is cross-cut by no less than three major east-west sutures[1—6]. Yarlung Zangbo suture, marked by one 1500km long ophiolite belt appearing at the southernmost Tibet, separates the Tethyan Hi- malaya to the south from the Lhasa block to the north. In order to understand the deep structure of Tibetan crust and the uplifting process of Tibetan Plateau, one wide-angle seismic…     

Geochemistry and Sr-Nd-Pb isotopic characteristics of the Mugouriwang Cenozoic volcanic rocks from Tibetan Plateau:Constraints on mantle source of the underplated basic magma

The Mugouriwang Cenozoic volcanic rocks exposed in the north Qiangtang Block of Tibetan Plateau are mainly composed of basalt and andesitic-basalt,both characterized by the lower SiO2 (51%―54%),high refractory elements (i.e. Mg,Cr,Ni) as well as the moderate enrichment in light rare earth elements (LREE) relative to a slight depleted in Eu and high strength field elements (HFSE,i.e. Nb,Ta,Ti). Be-sides,the fairly low Sm/Yb value (3.07―4.35) could signify that the rocks should be derived directly from partial melting of the spinel lherzolite at the upper part of the asthenosphere. These rocks have radiogenic Sr and Pb (87Sr/86Sr = 0.705339 to 0.705667; 208Pb/204Pb = 38.8192 to 38.8937; 207Pb/204Pb = 15.6093 to 15.6245; 206Pb/204Pb = 18.6246 to 18.6383),and non-radiogenic Nd (143Nd/144Nd = 0.512604 to 0.512639; εNd = 0.02 to -0.66) in agreement with those values of the BSE mantle reservoir. The DUPAL anomaly of the rocks can be evidently attested by the △8/4Pb = 66.82 to 74.53 ,△7/4Pb = 9.88 to 11.42,△Sr>50,implying that the Mugouriwang volcanic rock is likely to be generated by partial melting of a Gondwana-bearing asthenospheric mantle ever matasomatised by the fluid from subduction zone. Depending on the previous study on the high-K calc-alkaline intermediate-felsic volcanics in the study area,this paper proposed that the fluids derived from the subducted Lhasa Block metasomatised the asthenosphere beneath the Qiangtang Block,and induced its partial melting,and then the melt under-plated the thickened Qiangtang lithosphere and caused the generation of the Cenozoic adakite-like felsic magmas in the Qiangtang region.     

Material records for Mesozoic destruction of the North China Craton by subduction of the Paleo-Pacific slab

It is well known that the destruction of the North China Carton(NCC) is closely related to subduction of the PaleoPacific slab, but materials recording such subduction has not been identified at the peak time of decratonization. This paper presents data of whole-rock major and trace elements and Sr-Nd-Hf isotopes and zircon U-Pb ages and Hf-O isotopes for Mesozoic volcanic rocks from the Liaodong-Jinan region in the northeastern NCC, in order to trace the subduction-related materials in their source and origin. The Mesozoic volcanic rocks in the Liaodong-Jinan region are mainly composed of two series of rocks, including alkaline basaltic trachyandesite, trachyandesite and trachyte, and subalkaline trachyandesite and andesite. Zircon U-Pb dating yields eruption ages of 129–124 Ma for these rocks. The Early Cretaceous volcanic rocks are all enriched in LILEs(such as Rb, Sr, Ba and Th) and LREEs, depleted in HFSEs(such as Nb, Ta and Ti), indicating that they were originated from mantle sources that had been modified by subducted crustal materials. However, they have relatively heterogeneous and variable isotopic compositions. The alkaline basaltic trachyandesite, trachyandesite and trachyte have enriched whole-rock Sr-Nd-Hf and zircon Hf isotopic compositions and mantle-like δ~(18)O values, suggesting that they were derived from low-degree partial melting of an isotopically enriched lithospheric mantle source. In contrast, the subalkaline trachyandesite and andesite have relatively depleted isotopic compositions with zircon ε_(Hf)(t) values up to +5.2 and heavy zircon O isotopic compositions with δ~(18)O values of +8.1‰ to +9.0‰, indicating that they were originated from a lithospheric mantle source that had been metasomatized by melts/fluids derived from the recycled low-T altered oceanic basalt. All of these geochemical features suggest that the Early Cretaceous volcanic rocks in the Liaodong-Jinan region would result from mixing of mafic magmas with different compositions. Such magmas were originated from the enriched lithospheric mantle and the young metasomatized mantle, respectively, with variable extents of enrichment and depletion in trace elements, radiogenic isotopes and O isotopes. Importantly, the identification of the low-T altered oceanic crust component in the origin of Early Cretaceous volcanic rocks by the zircon Hf-O isotopes provides affirmative isotopic evidence and direct material records for Mesozoic subduction of the Paleo-Pacific slab that induced decratonization of the North China Craton.     

A multi-model analysis of glacier equilibrium line altitudes in western China during the last glacial maximum

Based on numerical experiments undertaken with nine climate models, the glacier equilibrium line altitudes(ELAs)in western China during the last glacial maximum(LGM) are investigated to deepen our understanding of the surface environment on the Tibetan Plateau. Relative to the preindustrial period, the summer surface air temperatures decrease by 4–8°C while the annual precipitation decreases by an average of 25% across the Tibetan Plateau during the LGM. Under the joint effects of reductions in summer temperature and annual precipitation, the LGM ELAs in western China are lowered by magnitudes that vary with regions. The ELAs in the southern margin and northwestern Tibetan Plateau decline by approximately 1100 m; the central hinterland, by 650–800 m; and the eastern part, by 550–800 m, with a downward trend from southwest to northeast. The reduction in ELAs is no more than 650 m in the Tian Shan Mountains within China and approximately 500–600 m in the Qilian Mountains and Altai Mountains. The high-resolution models to reproduce the low values of no more than 500 m in ELA reductions in the central Tibetan Plateau, which are consistent with the proxy records from glacier remains. The accumulation zones of the Tibetan Plateau glaciers are mainly located in the marginal mountains during the LGM and have areas 2–5 times larger than those of the modern glaciers but still do not reach the central part.     

Response of grain size of Quaternary gravels to climate and tectonics in the northern Tibetan Plateau

The widely distributed thick gravel deposits along the rim of the Tibetan Plateau have been long thought to be the product of rapid tectonic uplift of the plateau. However, this has been challenged by recent works that suggest these thick gravels may be the result of climate change. In this paper we carried out a detailed field measurement of gravel grain sizes from the Jiuquan and Gobi Gravel Beds in the top of the Laojunmiao section in the Jiuxi Basin in the northern margin of Qilian Mts. (northern Tibetan Plateau). The results suggest that the grain sizes of the Jiuquan and Gobi Gravel Beds over the last 0.8 Ma are characterized by nine coarse-fine cycles having strong 100-ka and 41-ka periodicities that correlate well with the loess-paleosol monsoon record and isotopic global climatic record from deep sea sediments as well as by a long trend of coarsening in gravel grain size. The coarse gravel layers were formed during the warm-humid interglaciations while the fine layers correspond to the cold-dry glaciations. Because the paleoclimate in NW China began to get dramatically drier after the mid-Pleistocene, we think the persistent coarsening of gravel grain size was most probably caused by the rapid uplift of the northern Tibetan Plateau, and that the orbital scale cyclic variations in gravel grain size were driven by orbital forcing factors that were superimposed on the tectonically-forced long-term coarsening trend in gravel size. These findings also shed new light on the interaction results of climate and tectonics in relation to the uplift of the Tibetan Plateau.     

Deep seismic sounding data reveal the crustal structures beneath Zoigê basin and its surrounding folded orogenic belts

Songpan-Garze massif is located at the turning position of tectonics from the nearly west-east direction to the nearly north-south direction in the northeastern margin of Tibetan Plateau,with Zoigê basin in the centre of the massif.In this paper,we build a crustal structure model of Zoigê basin and its surrounding folded orogenic belts using the deep seismic sounding data in this region.We also discuss structures and properties of the basement in Zoigê basin,tectonic relations between Zoigê upland basin and its surrounding folded orogenic belts,crustal deformation and thickening in the northeastern margin of Tibetan Plateau,and decoupling and relaxing processes in the crust.The results indicate that a special "Mesozoic basement" is formed of Triassic rocks with high density (2.65-2.75 g/cm3) and high velocity (5.6 km/s) in Zoigê basin.Songpan-Garze tectonic massif was transformed into two types of tectonic units with different crustal structures,i.e.,relatively stable Zoigê upland basin and active folded orogenic belts around the basin,in the course of the crustal material of Tibetan Plateau flowing eastward and obstructed by surrounding stable blocks.The thickening of the crust in the northeastern margin of Tibetan Plateau mainly occurred in the mid and lower crust,and the structure characterized by low velocities and multiple reflectors obviously appears in the folded orogenic belts around Zoigê basin.It implies that the mid and lower crust underwent a strong tectonic deformation in the folded orogenic areas.The thickness of the crust is about 50 km in Zoigê basin and the folded orogenic belts at the both southern and northern sides of Zoigê basin.The "Mountain root" cannot be identified.It is inferred that during the later orogenic period the eastwards flowing deep materials moved clockwise along the relatively relaxing southern side around the eastern tectonic knot under the obstructing of surrounding rigid massifs,and it resulted in the strong stretching action of the folded orogenic belts around Zoigê basin.     

Magmatism during continental collision,subduction, exhumation and mountain collapse in collisional orogenic belts and continental net growth: A perspective

Continental orogens on Earth can be classified into accretionary orogen and collisional orogen.Magmatism in orogens occurs in every periods of an orogenic cycle,from oceanic subduction,continental collision to orogenic collapse.Continental collision requires the existence of prior oceanic subduction zone.It is generally assumed that the prerequisite of continental deep subduction is oceanic subduction and its drag force to the connecting passive-margin continental lithosphere during continental collision.Continental subduction and collision lead to the thickening and uplift of crust,but the formation time of the related magmatism in orogens depends on the heating mechanism of lithosphere.The accretionary orogens,on the other hand,have no strong continental collision,deep subduction,no large scale of crustal thrusting,thickening and uplift,and no UHP eclogite-facies metamorphic rocks related to continental deep subduction.Even though arc crust could be significantly thickened during oceanic subduction,it is still doubtful that syn-or post-collisional magmatism would be generated.In collisional orogens,due to continental deep subduction and significant crustal thickening,the UHP metamorphosed oceanic and continental crusts will experience decompression melting during exhumation,generating syn-collisional magmatism.During the orogen unrooting and collapse,post-collisional magmatism develops in response to lithosphere extension and upwelling of asthenospheric mantle,marking the end of an orogenic cycle.Therefore,magmatism in orogens can occur during the continental deep subduction,exhumation and uplift after detachment of subducted oceanic crust from continental crust,and extensional collapse.The time span from continental collision to collapse and erosion of orogens(the end of orogenic cycle)is 50–85 Myr.Collisional orogens are the key sites for understanding continental deep subduction,exhumation,uplift and orogenic collapse.Magmatism in collisional orogens plays important roles in continental reworking and net growth.     

Research on the 3—D Seismic Structures in Qinghai—Xizang Plateau

Based on the recording data from the analogue and broadband digital seismic stations in and around Qinghai-Xizang (Tibet)Platean,the three dimensiomal 3-D) seismic velocity stroctures in Qinghai-Xizang Plateau were obtained by using the regional body wave tomography and surface wave tomography.The results from these two tomography methods have similar characteristics for P-and S-wave velocity structures in crust and upper mantle.They show that there are remarkahle low velocity zones in the upper crust of L hasa block in the southern Qinghai-Xizang Plateau and the lower crust and upper mantle of Qiangtang block in the northern Qinghai-Xizang Plateau.These phenomena may be related to the different steps of collision process in southern and northern Qinghai-Xizang Plateau.     

Electrical conductivities of two granite samples in southern Tibet and their geophysical implications

There are clear differences in the electrical conductivities of the crustal granites of the Qinghai-Tibet Plateau.Because these granites are among the major rock types on the Qinghai-Tibet Plateau, it is very important to detect the electrical conductivity of granites under high temperatures and pressures to study the electrical conductivity structure of this area. Using impedance spectroscopy at a frequency range of 10.1–106 Hz, the electrical conductivity of the muscovite-granite collected from Yadong was investigated at a confining pressure of 1.0 GPa and temperatures ranging from 577 to 996 K, while the electrical conductivity of the biotite-granite collected from Lhasa was investigated at a pressure of 1.0 GPa and temperatures ranging from587 to 1382 K. The calculated activation enthalpies of the Yadong muscovite-granite sample is 0.92 eV in the low-temperature range(577–919 K) and 2.16 eV in the high-temperature range(919–996 K). The activation enthalpies of the Lhasa biotite-granite sample is 0.48 eV in the low-temperature range(587–990 K) and 2.06 eV in the high-temperature range(990–1382 K). The change in the activation enthalpies of the granites at different temperature ranges may be associated with the dehydration of the two samples. The electrical conductivities of the granite samples obtained in the laboratory using impedance spectroscopy correspond well with field observations conducted near the sampling points, both in terms of the actual conductivity values and the observed variations between the low-temperature and high-temperature regimes. This correlation of laboratory and field conductivities indicates that the conductivities of the crustal rocks in the two regions closely correspond to granite conductivities.We calculated the electrical conductivities of muscovite-granite and biotite-granite samples using the effective medium and HS boundary models. When applied to the crustal rocks of southern Tibet, the results of the geophysical conductivity profiles lie within the range of laboratory data. Thus, the electrical characteristics of the crustal rocks underlying the southern Qinghai-Tibet Plateau can largely be attributed to granites, with the large changes to high conductivities at increasing depths resulting from the dehydration of crustal rocks with granitic compositions.     

History and possible mechanisms of prehistoric human migration to the Tibetan Plateau

Prehistoric human history on the Tibetan Plateau is a hotly debated topic. Archaeological research on the plateau during the past few decades has enormously improved our understanding of the topic and makes it possible for us to consider the processes and mechanisms of prehistoric human migration to the region. By reviewing the published archaeological research on the Tibetan Plateau, we propose that the first people on the plateau initially spread into the He-Huang region from the Chinese Loess Plateau, and then moved to the low elevation Northeastern Tibetan Plateau and perhaps subsequently to the entire plateau. This process consisted of four stages.(1) During the climatic amelioration of the Last Deglacial period(15–11.6 ka BP), Upper Paleolithic hunter-gatherers with a developed microlithic technology first spread into the Northeastern Tibetan Plateau.(2) In the early-mid Holocene(11.6–6 ka BP), Epipaleolithic microlithic hunter-gatherers were widely distributed on the northeastern plateau and spread southwards to the interior plateau, possibly with millet agriculture developed in the neighboring low elevation regions.(3) In the mid-late Holocene(6–4 ka BP), Neolithic millet farmers spread into low elevation river valleys in the northeastern and southeastern plateau areas.(4) In the late Holocene(4–2.3 ka BP), Bronze Age barley and wheat farmers further settled on the high elevation regions of the Tibetan Plateau, especially after 3.6 ka BP. Finally, we suggest that all of the reported Paleolithic sites earlier than the LGM on the Tibetan Plateau need further examination.     

Deep dynamical processes in the central-southern Qinghai-Tibet Plateau—Receiver functions and travel-time residuals analysis of north Hi-Climb

Teleseismic receiver functions and travel-time residuals along the north Hi-Climb broadband seismic array in the central-southern Qinghai-Tibet Plateau show that the lithosphere structures in the central and western Qinghai-Tibet Plateau are different. In the central Qinghai-Tibet Plateau, the Indian Plate is northward subducted beneath the Qiangtang block and arrives at the greatest depth beneath the central-southern Qiangtang block. The delaminated Indian lithospheric slab remains beneath the central Lhasa block to a depth possibly greater than that of the upper interface of the mantle transform zone. In the western Qinghai-Tibet Plateau, the Indian lithospheric plate is gently northward subducted and may have arrived to the south of Tarim plate. Due to the resistance from the gently northward subduction of the Indian mantle lithosphere in the western Qinghai-Tibet Plateau, the upwelling mantle material be-neath the Qiangtang block moves mostly toward the east to bring about the lateral eastward flow of the deep mantle hot material in the central Qinghai-Tibet Plateau.     

Crustal structure of northeastern margin of the Tibetan Plateau by receiver function inversion

Using seismic data of about one year recorded by 18 broadband stations of ASCENT project,we obtained 2547 receiver functions in the northeastern Tibetan Plateau.The Moho depths under 14 stations were calculated by applying the H-κ domain search algorithm.The Moho depths under the stations with lower signal-noise ratio(SNR) were estimated by the time delay of the PS conversion.Results show that the Moho depth varies in a range of ~40–60 km.The Moho near the Haiyuan fault is vague,and its depth is larger than those on its two sides.In the Qinling-Qilian Block,the Moho becomes shallower gradually from west to east.To the east of 105°E,the average depth of the Moho is 45 km,whereas the west is 50 km or even deeper.Combining our results with surface wave research,we suggest a boundary between the Qinling and the Qilian Mountains at around 105°E.S wave velocities beneath 15 stations have been obtained through a linear inversion by using Crust2.0 as an initial model,and the crustal thickness that was derived by H-κ domain search algorithm was also taken into account.The results are very similar to the results of previous active source studies.The resulting figure indicates that low velocity layers developed in the middle and lower crust beneath the transition zone of the Tibet Block and western Qinling,which may be related to regional faults and deep earth dynamics.The velocity of the middle and lower crust increases from the Songpan Block to the northeastern margin of Tibetan Plateau.Based on the velocity of the crust,the distribution of the low velocity zone and the composition of the curst(Poisson's ratio),we infer that the crust thickening results from the crust shortening along the direction of compression.     

S-wave crustal and upper mantle's velocity structure in the eastern Tibetan Plateau——Deep environment of lower crustal flow

A teleseismic profile consisting of 26 stations was deployed along 30°N latitude in the eastern Tibetan Plateau. By use of the inversion of P-wave receiver function, the S-wave velocity structures at depth from surface to 80 km beneath the profile have been determined. The inversion results reveal that there is significant lateral variation of the crustal structure between the tectonic blocks on the profile. From Linzhi north of the eastern Himalayan Syntaxis, the crust is gradually thickened in NE direction; the crustal thickness reaches to the maximum value (~72 km) at the Bangong-Nujiang suture, and then decreased to 65 km in the Qiangtang block, to 57―64 km in the Bayan Har block, and to 40―45 km in the Sichuan Basin. The eastern segment of the teleseismic profile (to the east of Batang) coincides geographically with the Zhubalong-Zizhong deep seismic sounding profile carried out in 2000, and the S-wave velocity structure determined from receiver functions is consistent with the P-wave velocity structure obtained by deep seismic sounding in respect of the depths of Moho and major crustal interfaces. In the Qiangtang and the Bayan Har blocks, the lower velocity layer is widespread in the lower crust (at depth of 30―60 km) along the profile, while there is a normal velocity distribution in lower crust in the Sichuan Basin. On an average, the crustal velocity ratio (Poisson ratio) in tectonic blocks on the profile is 1.73 (σ = 0.247) in the Lhasa block, 1.78 (σ = 0.269) in the Banggong-Nujiang suture, 1.80 (σ = 0.275) in the Qiangtang block, 1.86 (σ = 0.294) in the Bayan Har blocks, and 1.77 (σ = 0.265) in the Yangtze block, respectively. The Qiangtang and the Bayan Har blocks are characterized by lower S-wave velocity anomaly in lower crust, complicated Moho transition, and higher crustal Poisson ratio, indicating that there is a hot and weak medium in lower crust. These are considered as the deep environment of lower crustal flow in the eastern Tibetan Plateau. Flowage of the ductile material in lower crust may be attributable to the variation of the gravitational potential energy in upper crust from higher on the plateau to lower off plateau.     

Relation between electricity structure of the crust and deformation of crustal blocks on the northeastern margin of Qinghai-Tibet Plateau

The Qinghai-Tibet Plateau was formed by coales-cence of microcontinents of different geologic histo-ries, i.e. it consists of a series of blocks, such as Hi-malayas, Lhasa, Qiangtang, Kunlun, Qaidam and Qi- lian blocks from south to north. The blocks moved firstly in the NNE direction, then in the NE direction and at last in the ENE or E-W direction from south to north by a combined action of Indian Plate moving northward and obstruction of Tarim and other blocksnorth of the plateau. T…