Three-dimensional VP and VP /VS models of the upper crust in the Friuli area (northeastern Italy)

3-D images of P velocity and P - to S -velocity ratio have been produced for the upper crust of the Friuli area (northeastern Italy) using local earthquake tomography. The data consist of 2565 P and 930 S arrival times of high quality. The best-fitting V _P and V _P / V _S 1-D models were computed before the 3-D inversion. V _P was measured on two rock samples representative of the investigated upper layers of the Friuli crust. The tomographic V _P model was used for modelling the gravity anomalies, by converting the velocity values into densities along three vertical cross-sections. The computed gravity anomalies were optimized with respect to the observed gravity anomalies. The crust investigated is characterized by sharp lateral and deep V _P and V _P / V _S anomalies that are associated with the complex geological structure. High V _P / V _S values are associated with highly fractured zones related to the main faulting pattern. The relocated seismicity is generally associated with sharp variations in the V _P / V _S anomalies. The V _P images show a high-velocity body below 6 km depth in the central part of the Friuli area, marked also by strong V _P / V _S heterogeneities, and this is interpreted as a tectonic wedge. Comparison with the distribution of earthquakes supports the hypothesis that the tectonic wedge controls most of the seismicity and can be considered to be the main seismogenic zone in the Friuli area.     

Imaging upper-mantle discontinuity topography usingunderside-reflection data

This paper presents a method to invert underside-reflection ( P _d P or S _d S arrivals) data for lateral depth variations of upper-mantle discontinuities, combining traveltime and amplitude data. The method greatly improves the resolution of small-scale undulations obtained by existing imaging methods and does not suffer from the long-wavelength biases that are likely to be present in currently available models. Existing inversion methods account for the large size of the Fresnel zone of underside reflections, but not for its complexity, arising from the mini-max traveltime nature of PP- and SS -related waves. This neglect results in long-wavelength artefacts from small-scale undulations of the discontinuities, obscuring true long-wavelength depth variations. The inversion method presented in this paper uses a complex-valued sensitivity kernel, derived from the representation of underside reflections through a Kirchhoff integral formulation. The sensitivity kernel accounts for the varying sensitivity of the waveforms to discontinuity structure over the Fresnel zone. The method is applied to a large, synthetic data set. The data set consists of P _d P amplitudes and traveltimes. The results show that the new inversion method resolves depth variations on a lateral scale that is smaller than the size of the Fresnel zone of individual underside reflections (but larger than the dominant wavelength), retaining the resolution of large-scale variations. The results presented here suggest that the discontinuity depth variations induced by slab penetration of the 670 discontinuity could be resolved by current broad-band P ₆₇₀ P data sets.     

Absolute S-velocity estimation from receiver functions

We present a novel method to recover absolute S velocities from receiver functions.
For a homogeneous half-space the S velocity can be calculated from the horizontal slowness and the angle of surface particle motion for an incident P wave. Generally, the calculated S velocity is an apparent half-space value which depends on model inhomogeneity and P -waveform. We therefore, suggest to calculate such apparent half-space S velocities from low-pass filtered (smoothed) receiver functions using a suite of filter-parameters, T . The use of receiver functions neutralize the influence of the P -waveform, and the successive low-pass filterings emphasize the variation of S velocity with depth.
We apply this   V _{S ,app.}( T )  technique to teleseismic data from three stations: FUR, BFO and SUM, situated on thick sediments, bedrock and the Greenland ice cap, respectively. The observed   V _{S ,app.}( T )  curves indicate the absolute S velocities from the near surface to the uppermost mantle beneath each station, clearly revealing the different geological environments. Application of linearized, iterative inversion quantify these observations into   V _S ( z )  models, practically independent of the S -velocity starting model. The obtained models show high consistency with independent geoscientific results. These cases provide also a general validation of the   V _{S ,app.}( T )  method.
We propose the computation of   V _{S ,app.}( T )  curves for individual three-component broad-band stations, both for direct indication of the S velocities and for inverse modelling.     

Coupled normal-mode sensitivity to inner-core shear velocity and attenuation

We have studied the response of normal modes to perturbations in inner-core shear velocity and attenuation, using fully coupled mode synthetics. Our results indicate that (i) mode pairs   _n S _l – _{n ±1} S _l   are strongly coupled by anelasticity, (ii) this coupling causes shear velocity perturbations to strongly affect the Q values of modes through exchange of inner-core characteristics, (iii) there is no evidence for a weakly attenuating inner core in shear, and (iv) the discrepancy between attenuation models returned from normal modes and body waves is small. These results suggest that inversions for inner-core attenuation and shear velocity should be performed simultaneously and should take account of the strong cross-coupling due to attenuation.     

Upper crustal shear velocity models from higher mode Rayleigh wave dispersion in Scotland

Summary. Group velocities for first and second higher mode Rayleigh waves, in the frequency range 0.8–4.8 Hz, generated from a local earthquake of magnitude 3.7 M _L in western Scotland, are measured at stations along the 1974 LISPB line. These provide detailed information about the crustal structure west of the line. The data divide the region into seven apparently homogeneous provinces. Averaged higher mode velocity dispersion curves for each province are analysed simultaneously using a linearized inversion technique, yielding regionalized shear velocity profiles down to a depth of 17 km into the upper crust. Shear wave velocity is between 3.0 and 3.4 km s⁻¹ in the upper 2 km, with a slow increase to around 3.8 km s⁻¹. P -wave models computed using these results agree with profiles from the LISPB and LUST refraction experiments.     

On the nature of regional seismic phases–II. On the influence of structural barriers

The blockage of the L _g wave by crustal barriers such as continental margins and graben structures has long been recognized as providing a very useful tool for mapping large-scale lateral crustal variations along the propagation path. Numerical simulation of L _g -wave propagation in complex anelastic media using the pseudospectral method provides insight into the nature of the propagation process using both snapshots of the wavefield and synthetic seismograms. A variety of 2-D structures have been investigated, including the influence of sediments, crustal thickness and attenuation.
Thick sedimentary basins covering a graben structure can have a major influence, since they remove L _g energy by generating P conversion and scattering–the principal mechanisms for strong L _g attenuation across a graben. The reduction of the L _g energy is reinforced by anelastic attenuation in the sediments as well as the influence of the gradually thinning crustal waveguide associated with an elevated Moho.
The extinction of L _g in a sequence of explosions fired across the central graben of the North Sea can be simulated by numerical calculations for the structure derived from refraction experiments.     

Non-linear altimetric geoid inversion for lithospheric elastic thickness and crustal density

The inversion of high-resolution geoid anomaly maps derived from satellite altimetry should allow one to retrieve the lithospheric elastic thickness, T _e , and crustal density, _c . Indeed, the bending of a lithospheric plate under the load of a seamount depends on both parameters, and the associated geoid anomaly is correspondingly dependent on the two parameters. The difference between the observed and modelled geoid signatures is estimated by a cost function, J , of the two variables, T _e and _c . We show that this cost function forms a valley structure along which many local minima appear, the global minimum of J corresponding to the true values of the lithospheric parameters. Classical gradient methods fail to find this global minimum because they converge to the first local minimum of J encountered, so that the final parameter estimate strongly depends on the starting pair of values ( T _e ,   _c ). We here implement a non-linear optimization algorithm to recover these two parameters from altimetry data. We demonstrate from the inversion of synthetic data that this approach ensures robust estimates of T _e and _c by activating two search phases alternately: a gradient phase to find a local minimum of J , and a tunnelling phase through high values of the cost function. The accuracy of the solution can be improved by a search in an iteratively restricted parameter subspace. Applying our non-linear inversion to the Great Meteor Seamount geoid data, we further show that the inverse problem is intrinsically ill-posed. As a consequence, minute geoid (or gravity) data errors can induce large changes in any recovery of lithospheric elastic thickness and crustal density.     

Seismic amplitude tomography for crustal attenuation beneath China

Amplitude tomography reconstructs seismic attenuation directly from recorded wave amplitudes. We have applied the tomography to amplitude data reported in the 'Annual Bulletin of Chinese Earthquakes' and interpreted the regionally varying crustal attenuation in terms of tectonics. The seismic amplitudes were originally recorded for determining the M _L and M _S magnitudes. They generally correspond to the maximum amplitudes of the horizontal components of the short-period S waves and intermediate-period Rayleigh waves. Both sets of measurements are sensitive to crustal structure. The peak amplitudes from M _L amplitudes spread spherically with significant dispersion and scattering. M _S amplitudes show cylindrical spreading with little dispersion. Average crustal Q values for attenuation at 1 Hz are 737 and 505 for M _L and M _S, respectively, with substantial regional variations. Frequency dependence in the attenuation is also indicated. Regions with the lowest attenuation (high Q values) are beneath the south China Block, Sichuan Basin, Ordos Platform, the Daxinganling and the Korea Craton. These tend to be tectonically inactive regions, which are generally dominated by intrusive and cratonic rocks in the upper crust. Regions with the highest attenuation (low Q values) are beneath Bohai Basin, Yunnan, eastern Songpan-Ganzi Terrain, margins of the Ordos platform and the Qilian Shan. These are predominantly active basins, grabens and fold belts. The continental margin also highly attenuates both S and surface waves.     

Note on inversion of reflection data for layered media

Summary It is pointed out that the data on which the Marchenko inversion of the second-order equation for fluid media reconstructs the impedance are not all independent. In particular, the derivative Z' ₀ of the surface impedance is implied by the displacement velocity response at the surface. We also note that unless Z' ₀= 0 the zero-frequency reflection amplitude must always equal — 1.     

A three-dimensional radially anisotropic model of shear velocity in the whole mantle

We present a 3-D radially anisotropic S velocity model of the whole mantle (SAW642AN), obtained using a large three component surface and body waveform data set and an iterative inversion for structure and source parameters based on Non-linear Asymptotic Coupling Theory (NACT). The model is parametrized in level 4 spherical splines, which have a spacing of ∼ 8°. The model shows a link between mantle flow and anisotropy in a variety of depth ranges. In the uppermost mantle, we confirm observations of regions with   V_SH > V_SV   starting at ∼80 km under oceanic regions and ∼200 km under stable continental lithosphere, suggesting horizontal flow beneath the lithosphere. We also observe a   V_SV > V_SH   signature at ∼150–300 km depth beneath major ridge systems with amplitude correlated with spreading rate for fast-spreading segments. In the transition zone (400–700 km depth), regions of subducted slab material are associated with   V_SV > V_SH   , while the ridge signal decreases. While the mid-mantle has lower amplitude anisotropy (<1 per cent), we also confirm the observation of radially symmetric   V_SH > V_SV   in the lowermost 300 km, which appears to be a robust conclusion, despite an error in our previous paper which has been corrected here. The 3-D deviations from this signature are associated with the large-scale low-velocity superplumes under the central Pacific and Africa, suggesting that   V_SH > V_SV   is generated in the predominant horizontal flow of a mechanical boundary layer, with a change in signature related to transition to upwelling at the superplumes.     

Stacking for the frequencies and Qs of 0S0 and 1S0

Summary. Using nine IDA records for the Indonesian earthquake of 1977 August 19, we have formed an optimal linear combination of the records and have measured the frequency and Q of ₀ S ₀ and ₁ S ₀. The frequency was measured using the moment ratio method. The attenuation was measured by the minimum width method and by the time-lapse method. The frequency and attenuation were measured simultaneously by varying them to obtain a best fit to the data. A 2000-hr stack, the sum of nine individual records, for ₀ S ₀ gave a frequency of 0.814664 mHz±4 ppm. The values for the Q of ₀ S ₀ for the three different methods of measurement were 5600,5833 and 5700, respectively. The error in the estimates of Q ^-1 is about 5 per cent for the minimum power method. For ₁ S ₀ a 300-hr stack yielded a frequency of 1.63151 mHz±30 ppm. The values of Q for this mode were 1960, 1800 and 1850, respectively, with an error in Q ^-1 of about 12 per cent for the minimum power method.     

Born scattering of longperiod body waves

The Born approximation is applied to the modelling of the propagation of deeply turning longperiod body waves through heterogeneities in the lowermost mantle. We use an exact Green's function for a spherically symmetric earth model that also satisfies the appropriate boundary conditions at internal boundaries and the surface of the earth. The scattered displacement field is obtained by a numerical quadrature of the product of the Green's function, the exciting wavefield and structural perturbations. We study three examples: scattering of longperiod P waves from a plume rising from the coremantle boundary (CMB), generation of longperiod precursors to PKIKP by strong, localized scatterers at the CMB, and propagation of corediffracted P waves through largescale heterogeneities in D". The main results are as follows: (1) the signals scattered from a realistic plume are small with relative amplitudes of less than 2 per cent at a period of 20 s, rendering plume detection a fairly difficult task; (2) strong heterogeneities at the CMB of appropriate size may produce observable longperiod precursors to PKIKP in spite of the presence of a diffraction from the PKP B caustic; (3) corediffracted P  waves ( P _diff) are sensitive to structure in D" far off the geometrical ray path and also far beyond the entry and exit points of the ray into and out of D"; sensitivity kernels exhibit ringshaped patterns of alternating sign reminiscent of Fresnel zones; (4) P _diff also shows a nonnegligible sensitivity to shear wave velocity in D"; (5) down to periods of 40 s, the Born approximation is sufficiently accurate to allow waveform modelling of P _diff through largescale heterogeneities in D" of up to 5 per cent.     

Lateral variation and frequency dependence of coda-Q in the southern part of Iberia

b
A method based on the coda attenuation law: Q = Q ₀( f/f ₀)^v leads to the determination of the lateral variation of coda- Q in the southern part of the Iberian Peninsula using seismograms belonging to the seismological network of the Cartuja Observatory, located in Granada. The lateral variation of Q ₀ ( Q value corresponding to a reference frequency f ₀ of 1 Hz) and its frequency dependence for the 1 to 5 Hz frequency range are, in general, in agreement with coda- Q values for frequencies less than about 1 Hz, previously determined in the region under study.
To determine the coda- Q values analytical functions have been used to fit the magnification curves of the vertical component short-period seismographs belonging to the Cartuja network. The problem is solved by using least-squares techniques and non-linear inversion. The determined coda- Q ₀ values and its frequency dependence correlate well with several known geophysical parameters in the southern part of the Iberian Peninsula.     

Crustal structure of Iraq from receiver functions and surface wave dispersion: implications for understanding the deformation history of the Arabian–Eurasian collision

We report the crustal structure for two locations in Iraq estimated by joint inversion of P -wave receiver functions (RFs) and surface (Rayleigh) wave group velocity dispersion. RFs were computed from teleseismic recordings at two temporary broad-band seismic stations located in Mosul (MSL) in the Zagros Fold Belt and Baghdad (BHD) in the Mesopotamian Foredeep. Group velocity dispersion curves at the sites were derived from continental-scale tomography. The inversion results show that the crustal thicknesses are 39 km at MSL and 43 km at BHD. We observe a strong Ps _Moho at BHD consistent with a sharp Moho discontinuity. However, at MSL we observe a weak Ps _Moho suggesting a transitional Moho where crustal thickening is likely to be occurring in the deep crust. Both sites reveal low velocity surface layers consistent with sedimentary thickness of about 3 km at station MSL and 7 km at BHD and agreeing well with the previous reports. Ignoring the sediments, the crystalline crustal velocities and thicknesses are remarkably similar at both stations. The similarity of crustal structure suggests that the crust of the northeastern proto-Arabian Platform was uniform before subsidence and deposition of the sediments in the Cenozoic. If crystalline crustal structure is uniform across the northern Arabian Platform then crustal thickness variations in the Zagros Fold Belt and Thrust Zone should reveal the history of deformation and crustal shortening in the Arabian–Eurasian collision zone and not reflect pre-existing crustal thickness variations in the Arabian Plate.     

Two-dimensional non-linear inversion of VLF-R data using simulated annealing

The VLF-R (very low frequency-resistivity) data, i.e. the apparent resistivity ( ρ _a ) and phase ( φ ) data, were inverted individually and jointly using the VFSA (very fast simulated annealing) global inversion approach. Global inversion results for synthetic data without and with various amounts of random and normally distributed Gaussian noise reveal that the inversion of neither the ρ _a nor φ data alone yields the true parameters of the structures. However, the joint inversion of the ρ _a and φ data yields very good estimates of the model parameters. Five models, representing typical subsurface structures in the shield areas, are studied here. Various models achieved after 10 VFSA runs were used to compute the mean model and the corresponding covariance and correlation matrices, which were used to estimate the uncertainties in the mean model parameters and correlations between the model parameters. We observe that these correlations follow the physics associated with the problem. VLF-R field data due to a nearly vertical contact structure and a very thick dyke-like structure were also inverted to demonstrate the efficacy of the approach in the delineation of the parameters of 2-D structures.     

Inversion of sonic waveforms with unknown source and receiver functions

A seismogram that is several times the length of the source-receiver wavelet is windowed into two parts—these may overlap—to obtain two seismograms with approximately the same source function but different Green's functions. A similarly windowed synthetic seismogram gives two corresponding synthetic seismograms. The spectral product of the window 1 data with the window 2 synthetic is equal to the spectral product of the window 1 synthetic with the window 2 data only if the correct earth model is used to compute the synthetic. This partition principle is applied to well-log sonic waveform data from Ocean Drilling Project hole 806B, a slow formation, and used there to estimate Poisson's ratio from a single seismogram whose transmitter and receiver functions are unknown. A multichannel extension of the algorithm gives even better results. The effective borehole radius R _b, was included in the inversion procedure, because of waveform sensitivity to R _b. Inversion results for R _b agreed with the sonic caliper, but not the mechanical caliper; thus if R _b is not included in the inversion its value should be taken from the sonic caliper.     

Low-velocity zone parameters as functions of focal depth

Summary. Explicit inversion for the velocity-depth structure within a low-velocity zone (LVZ) can be made from surface observations of the variations of the travel-time intercept () and the epicentral distance extent (γ) of the shadow zone as functions of focal depth. Prior knowledge of the focal depths is not required. The observed -γ curve can be converted into the corresponding travel-time curve that crosses the shadow zone in the surface focus travel-time curve. The inversion of this travel-time curve requires the construction of the LVZ ray parameter—epicentral distance ( p- Δ) curve by the relation p-p _L= d / d γ where p _L is the p at which the LVZ occurs. Inversion is then performed by treating each layer in the LVZ as a separate LVZ.     

Joint inversion of receiver function and surface wave dispersion observations

We implement a method to invert jointly teleseismic P wave receiver functions and surface wave group and phase velocities for a mutually consistent estimate of earth structure. Receiver functions are primarily sensitive to shear wave velocity contrasts and vertical traveltimes, and surface wave dispersion measurements are sensitive to vertical shear wave velocity averages. Their combination may bridge resolution gaps associated with each individual data set. We formulate a linearized shear velocity inversion that is solved using a damped leastsquares scheme that incorporates a priori smoothness constraints for velocities in adjacent layers. The data sets are equalized for the number of data points and physical units in the inversion process. The combination of information produces a relatively simple model with a minimal number of sharp velocity contrasts. We illustrate the approach using noisefree and realistic noise simulations and conclude with an inversion of observations from the Saudi Arabian Shield. Inversion results for station SODA, located in the Arabian Shield, include a crust with a sharp gradient near the surface (shear velocity changing from 1.8 to 3.5 km s¹ in 3 km) underlain by a 5kmthick layer with a shear velocity of 3.5 km s¹ and a 27kmthick layer with a shear velocity of 3.8 km s¹, and an upper mantle with an average shear velocity of 4.7 km s¹. The crustmantle transition has a significant gradient, with velocity values varying from 3.8 to 4.7 km s¹ between 35 and 40 km depth. Our results are compatible with independent inversions for crustal structure using refraction data.     

Source mechanism of the deep Colombian earthquake of 1970 July 31 from the free oscillation data

Summary. The method proposed by Mendiguren to determine the source parameters from free oscillation data is applied to the 1970 July 31 deep Colombian earthquake. The results indicate a source propagating horizontally for about 150 km along the lithosphere and cutting across its width. The slab behaves as a guide for source propagation. The horizontal propagation velocity is determined as 3.8 km/s. The intensity of the source grew proportionately to the second power of the propagation distance. This rate of source intensity growth may be interpreted either by a fan-shaped fault model or by a cone-shaped volume source. The average slip and stress drop are estimated as 360 cm and 300 bar for the fault model. For the volume source model the transformational shear strain and stress are estimated as 11 × 10⁻⁵ and 160 bar. There is no evidence of a double couple radiation preceding the P origin time. It is shown that the isotropic and deviatoric components of the moment tensor cannot be uniquely resolved when only observations of a single mode are available. It is observed that, from a statistical basis, the available ₀ S_n data for Colombian shock can be equally well explained by a pure deviatoric source model or by a source model including an isotropic component. Numerical experiments indicate that the inclusion of higher mode data does not change this situation. But, on the other hand, numerical experiments show that the available data and the scheme used for the inversion would not result in a solution including an artificial implosive component if the actual source were pure deviatoric. If the departure from a pure deviatoric source is produced by noise, it has to be non-random, as it could be produced by lateral heterogeneities not included in the inversion scheme.     

Inversion of seismic attributes for velocity and attenuation structure

We have developed an inversion formuialion for velocity and attenuation structure using seismic attributes, including envelope amplitude, instantaneous frequency and arrival times of selected seismic phases. We refer to this approach as AFT inversion for amplitude, (instantaneous) frequency and time. Complex trace analysis is used to extract the different seismic attributes. The instantaneous frequency data are converted to t * using a matching procedure that approximately removes the effects of the source spectra. To invert for structure, ray-perturbation methods are used to compute the sensitivity of the seismic attributes to variations in the model. An iterative inversion procedure is then performed from smooth to less smooth models that progressively incorporates the shorter-wavelength components of the model. To illustrate the method, seismic attributes are extracted from seismic-refraction data of the Ouachita PASSCAL experiment and used to invert for shallow crustal velocity and attenuation structure. Although amplitude data are sensitive to model roughness, the inverted velocity and attenuation models were required by the data to maintain a relatively smooth character. The amplitude and t * data were needed, along with the traveltimes, at each step of the inversion in order to fit all the seismic attributes at the final iteration.