The geometric, sedimentologic and hydrologic attributes of spring-dominated channels in volcanic areas

In volcanic areas of Idaho, Oregon and Montana, a number of perennial streams emerge from single springs or zones of springs. Surface drainage areas to these springs can be very small, often much smaller than the recharge area of the springs. Channels downstream of springs are often straight, or if sinuous, without regularity to the pattern. Bars are absent or poorly defined, but islands or downed timber are common in the channel. Channel width-to-depth ratios are large relative to those of runoff-dominated channels. Downstream hydraulic geometry exponents are similar, but the exponents for width and velocity are greater in spring-dominated channels. Manning roughness values are relatively large. The bedsurface in gravel-bed spring-dominated streams is armored. Computations indicate that bed material is probably capable of moving at bankfull stage.The hydrograph of spring-dominated streams is damped as compared to runoff-dominated streams locally and elsewhere. Peak flows occur months after precipitation or snowmelt. Mean annual flow for spring-dominated streams averages 72% of the flood with a recurrence interval of 2 years; the mean annual flow for runoff-dominated channels averages 18% locally and 25% elsewhere. The 50-year flood averages 1.6 times the 2-year flood on the annual series while the corresponding value for runoff-dominated channels in the region is 2.5. The damped hydrograph of spring-dominated streams suggests that they are somewhat different from runoff-dominated channels in the relationship between water and sediment. In spring-dominated channels, 34% of sediment is transported by flows above the 2-year flood—less than is observed typically in runoff-dominated channels. The effective discharge is similar in magnitude to the 2-year flood.     

Woody vegetation and channel morphogenesis in low-gradient, gravel-bed streams in the Ozark Plateaus, Missouri and Arkansas

Woody vegetation affects channel morphogenesis in Ozark streams of Missouri and Arkansas by increasing local roughness, increasing bank strength, providing sedimentation sites, and creating obstructions to flow. Variations in physiographic controls on channel morphology result in systematic changes in vegetation patterns and geomorphic functions with increasing drainage basin area. In upstream reaches, streams have abundant bedrock control and bank heights that typically are less than or equal to the rooting depth of trees. In downstream reaches where valleys are wider and alluvial banks are higher vegetation has different geomorphic functions. At drainage areas of greater than 100–200 kM², Ozarks streams are characterized by longitudinally juxtaposed reaches of high and low lateral channel migration rates, referred to as disturbance reaches and stable reaches, respectively. Whereas stable reaches can develop stable forested floodplains (if they are not farmed), disturbance reaches are characterized by dynamic vegetation communities that interact with erosion and deposition processes.Disturbance reaches can be subdivided into low-gradient and high-gradient longitudinal zones. Low-energy zones are characterized by incremental, unidirectional lateral channel migration and deposition of gravel and sand bars. The bars are characterized by prominent bands of woody vegetation and ridge and swale topography. Channel monitoring data indicate that densely vegetated bands of woody vegetation formed depositional sites during bedload-transporting events. The same floods caused up to 20 m of erosion of adjacent cutbanks, scoured non-vegetated areas between vegetation bands, and increased thalweg depth and definition. In high-energy (or riffle) zones, channel movement is dominantly by avulsion. In these zones, vegetation creates areas of erosional resistance that become temporary islands as the channel avulses around or through them. Woody vegetation on islands creates steep, root-defended banks that contribute to narrow channels with high velocities.Calculation of hydraulic roughness from density and average diameter of woody vegetation groups of different ages indicates that flow resistance provided by vegetation decreases systematically with group age, mainly through decreasing stem density. If all other factors remain constant, the stabilizing effect of a group of woody vegetation on a gravel bar decreases with vegetation age.     

Natural levee deposition during the 2005 flood of the Saskatchewan River

In summer 2005, a controlled flood of the Saskatchewan River (east-central Saskatchewan, Canada) resulted in general floodplain inundation and extensive natural levee deposition along a 60-km reach extending from 40 km below the E.B. Campbell dam to Cumberland Lake. Levee crests along channel banks were inundated for up to 7 weeks in some areas of the floodplain. New deposits on levee crests varied from 0 to 70 cm in thickness, displaying large variations both along reach and in opposing sites across channels. Mean grain sizes, mainly silt and very fine sand, likewise varied considerably among sample sites.Pre- and post-flood surveys of channel cross sections along the flooded reach permitted assessments of relationships between channel-area changes and patterns of levee sedimentation in this system in which virtually all new flood sediment was derived by channel scour. Results show that both net deposition and net erosion occurred within the channel cross sections, but that on average, net channel enlargement of 4.2% prevailed over the entire survey reach when weighted by cross-section size. Over the 60-km flooded reach, zones of thick levee deposition occur at or just downstream of two areas of major channel enlargement, and an intermediate zone of thin levee deposits is associated with an intermediate area of net channel aggradation. This bimodal distribution of flood-deposit thickness is inferred to have resulted from differences in sediment supply produced locally by the different extents of channel-perimeter erosion. Two other factors—(1) position of interfacial zones between clear floodbasin water and turbid channel water, and (2) difference in pre-flood levee heights—contributed to the poor correspondence in thickness and grain size between opposing levees at some sites. Additional features of the new levee deposits, including increases in transverse slopes, abrupt basinward fining, and paucity of deposition in distal areas due to clear floodbasin waters, are characteristic of strong front loading that results when suspended sediment production is restricted to channel erosion processes.     

Valley confinement as a factor of braided river pattern for the Platte River

The Platte River in Nebraska has evolved in the twentieth century from a predominantly braided river pattern to a mélange of meandering, wandering, anastomosed, island braided, and fully braided reaches. Identifying the factors that determine the occurrence of a fully braided main channel was the objective of this study. Aerial photography, gage flow data, ground-surveyed cross sections, bed material samples, and the results of sediment transport modeling were used to examine factors that control spatial change in main river pattern of the central Platte River. Valley confinement is identified as the determining factor of braided river in nine of eleven divisions of the central Platte River. Flow reduction and the interruption of sediment supply are identified as determining factors preventing fully braided river in the remaining two of eleven reaches.Valley confinement, the topography which limits the width of the floodplain, was initially measured as width between historical banks (predevelopment river banks). This metric was later refined to width between confining features (historical banks, remnant bars, bridge abutments, protected banks and levees). Under existing conditions, the main channel of the central Platte River is fully braided when valley confinement (width between confining features) is 600 m or less and begins to divide into the multiple channels of an anastomosed pattern when valley confinement (width between confining features) exceeds 600 m When Platte River flow is divided between two to four major anabranches, a fully braided pattern in the main channel of the main anabranch requires a more confined valley of 400 m or less.Valley confinement is demonstrated to be the dominant factor in determining river pattern in the central Platte River, although this factor is not normally considered in the continuum of channel pattern model. Conclusions from this study can be used to increase the occurrence of fully braided main channel in the central Platte River, to aid habitat recovery for endangered or threatened bird species that favor this river pattern. Consideration of valley confinement with river continuum factors can aid river managers by improving predictions of river pattern in response to management actions.     

长江中下游阻隔性河段作用机理

阻隔性河段能够阻隔上游河势调整向下游的传递,对稳定河势起到关键性作用。本文以长江中下游34个单一河段为研究对象,在系统总结长江中下游河道演变规律的基础上,归纳出阻隔性河段控制要素包括：单一微弯的河道平面形态、河段中上部无挑流节点;河相系数小于4;河道纵比降大于1.2?;凹岸黏粒含量高于9.5%;床沙中值粒径大于0.158 mm等。从Navier-Stokes方程出发,推导出河湾水流动力轴线弯曲半径的表达式,进而分析了各控制要素对水流动力轴线摆动及阻隔性河段形成的作用。阻隔性河段的判别条件为：不同流量级下水流动力轴线摆动力与河道边界条件约束力的比值始终小于1;阻隔性河段作用机理在于：即便上游河势发生调整,本河段的河道边界始终能约束主流摆动幅度,归顺上游不同河势条件下的主流平面位置,为下游河道提供了相对稳定的入流条件,从而阻隔上游河势调整向下游传递。     

Connectivity of the Coarsest Fraction in Headwater Channels: Imprints of Fluvial Processes and Debris‐Flow Activity

Some steep headwater streams of the mid‐mountains landscape of the flysch belt of the Western Carpathians are affected by debris flows. Connectivity of the largest boulder and cobble fractions has been evaluated in steep streams found in the transitional zones between the hillslopes and alluvial cones of similar lithology and watershed morphometry. Two longitudinal profiles affected by past debris‐flow activity and two longitudinal profiles void of such processes were selected. In the first case, active channels were characterised by the presence of the coarsest fraction, while a downstream trend of sediment coarsening or fining lacked any influence of contemporary fluvial processes and sediment supply. In addition, debris‐flow‐affected streams showed greater differences between the middle axis of the coarsest particle and the particle‐size index including the lengths of all three axes, which is most likely the result of limited active fluvial transport. All the studied streams demonstrated general downstream fining of the largest particles, which resulted from local flysch lithology containing more resistant sandstones in the upper parts of the watershed. The trend of sediment fining was more rapid in the longitudinal profiles unaffected by past debris flows. These types of streams also showed adjustment of the coarsest bed fraction to contemporary processes in channels by sediment coarsening in incised reaches and sediment fining in depositional reaches as well as by downstream response to some lateral sediment inputs. The index of the unit stream power showed no correlation with the considered coarsest fraction in both fluvial‐dominated channels and debris‐flow‐affected channels.     

The mechanism of barrier river reaches in the middle and lower Yangtze River

Alluvial channel has always adjusted itself to the equilibrium state of sediment transport after it was artificially or naturally disturbed. How to maintain the equilibrium state of sediment transport and keep the river regime stable has always been the concerns of fluvial geomorphologists. The channel in the middle and lower reaches of the Yangtze River is characterized by the staggered distribution of the bifurcated river and the single-thread river. The change of river regime is more violently in the bifurcated river than in the single-thread river. Whether the adjustment of the river regime in the bifurcated river can pass through the single-thread river and propagate to the downstream reaches affects the stabilities of the overall river regime. Studies show that the barrier river reach can block the upstream channel adjustment from propagating to the downstream reaches; therefore, it plays a key role in stabilizing the river regime. This study investigates 34 single-thread river reaches in the middle and lower reaches of the Yangtze River. On the basis of the systematic summarization of the fluvial process of the middle and lower reaches of the Yangtze River, the control factors of barrier river reach are summarized and extracted: the planar morphology of single-thread and meandering; with no flow deflecting node distributed in the upper or middle part of the river reach; the hydraulic geometric coefficient is less than 4; the longitudinal gradient is greater than 12‰, the clay content of the concave bank is greater than 9.5%, and the median diameter of the bed sediment is greater than 0.158 mm. From the Navier-Stokes equation, the calculation formula of the bending radius of flow dynamic axis is deduced, and then the roles of these control factors on restricting the migration of the flow dynamic axis and the formation of the barrier river reach are analyzed. The barrier river reach is considered as such when the ratio of the migration force of the flow dynamic axis to the constraint force of the channel boundary is less than 1 under different flow levels. The mechanism of the barrier river reach is such that even when the upstream river regime adjusts, the channel boundary of this reach can always constrain the migration amplitude of the flow dynamic axis and centralize the planar position of the main stream line under different upstream river regime conditions, providing a relatively stable incoming flow conditions for the downstream reaches, thereby blocking the upstream river regime adjustment from propagating to the downstream reaches.     

Multiple thread flow and channel bifurcation in a braided river: Brahmaputra–Jamuna River, Bangladesh

Considerable progress has been made recently in characterising the patterns displayed by the anabranches of braided rivers. However, the physical processes of sediment scour, transfer and deposition that govern the generation and evolution of anabranch channels remain largely unexplained. Direct measurement of three-dimensional flow fields and morphological evolution of the anabranches in the braided Brahmaputra–Jamuna River, Bangladesh, were undertaken to investigate the interactions between fluvial processes and anabranch morphology. These data were used to elucidate the circumstances leading to the bifurcation of a single channel, which is a topic of fundamental importance to understanding the physical processes responsible for braiding. Results indicate that division of the velocity field into multiple threads within a single channel precedes a division in the cross-sectional morphology of the channel and appears to be a necessary prerequisite for development of a bifurcation. An empirical relationship was established to discriminate between channels with single and multi-thread velocity fields, based on the depth-to-width ratio and specific energy of the flow at a representative channel cross-section. This function requires further validation, but could be used to predict the conditions under which a single channel is likely to bifurcate to produce two anabranches.     

ASYNCHRONOUS TERRACE DEVELOPMENT IN DEGRADING BRAIDED CHANNELS

Terrace remnants are commonly used to reconstruct longitudinal profiles of rivers and floodplains, and to establish temporal correlations of events in fluvial systems. In most cases, it is assumed that the terrace remnants represent time-equivalent surfaces. Our observations of terrace formation in flume experiments and in a degrading braided river, Ash Creek, Arizona, suggest that this assumption is not always valid. Degradation resulted from a reduction in upstream sediment delivery to braided channels. In both the flume and Ash Creek, degradation in the upstream reach produced a number of inset terraces, while the production of sediment in the degrading reach simultaneously caused further aggradation downstream. Thus, stratigraphically lower surfaces in the upstream reaches are temporally equivalent to higher surfaces in downstream reaches. The downstream progression of the wave of incision produced more terraces upstream than downstream, and terrace surfaces could not be correlated on the basis of relative position or elevation above the channel bed. Furthermore, a physically continuous terrace tread was produced by longitudinal accretion of temporally non-equivalent depositional segments, as the locus of deposition progressed downstream. Therefore, in some instances, physically continuous terrace treads may not be time-equivalent surfaces that represent former channel bed or floodplain profiles. [Key words: terrace development, degradation, braided channels, channel pattern change.]     

Periglacial and Fluvial Factors Controlling the Sedimentation of Pleistocene Breccia in NW Poland

Breccias were investigated on the terrace of the Toruń‐Eberswalde ice‐marginal valley at Rozwarzyn (NW Poland). Breccia layers include soft‐sediment clasts with diameters between 2 and 256 mm and soft‐sediment megaclasts with diameters from 256 mm to 7 m. The shape of the soft‐sediment clasts and megaclasts (derived from frozen sediments) in the breccia is diverse: from angular and irregular in the case of debris‐flow breccias to slightly rounded and tabular in fluvial breccias. These two types of breccias were developed during the Late Weichselian when the periglacial climate favored extensive lateral erosion by currents of frozen braided channels in the ice‐marginal valley. The dual presence of breccias of fluvial and debris‐flow origin in channel deposits is unique for Quaternary sediments. Zones of breccias existed in the channels where scours and obstacle marks related to megaclasts developed. The study of breccias shed new light on the fluvial processes in ice‐marginal valleys during the Pleistocene and can be considered as diagnostic for fluvio‐periglacial conditions.     

STORAGE OF MINING-RELATED ZINC IN FLOODPLAIN SEDIMENTS,BLUE RIVER,WISCONSIN

This study investigates spatial patterns of sediment-associated zinc (Zn) storage in floodplain deposits and the potential reintroduction of these metal-contaminated sediments to the active channel by bank erosion. We estimate patterns of Zn mass storage by combining longitudinal trends in Zn concentrations with measurements of sediment mass storage in overbank and point-bar deposits. Overbank deposits are the largest contaminant sink, storing five times more Zn than the point-bar deposits. While Zn concentrations decrease downstream because of dilution effects, the total mass of Zn stored in floodplains is greatest in both the upstream reaches and in the wider lower valleys where low channel gradients promote rapid sedimentation. Zn storage is low in middle reaches where steep, narrow valleys with high stream power favor sediment transport over deposition. Overall, more than half of the Zn released by mining remains stored in floodplain deposits within the watershed. The remobilization of Zn from storage is more likely in the upstream and mid-basin reaches where high stream power increases rates of lateral channel migration. Channels in the lower valley lack the stream power to migrate laterally and remobilize the large Zn mass stored in overbank sediments. [Key words: floodplains, Zn contamination, mining, stream power, Wisconsin.]     

Can the narrowing of the Lower Yellow River by regulation result in non-siltation and even channel scouring?

This study considered whether the narrowing of the upper (broad and wandering) reaches of the Lower Yellow River could result in a reduction in sedimentation and even an increase in channel erosion in both the upper and the lower (narrow and meandering) reaches. Analysis of field data and numerical modeling results both justify the proposal to narrow the channel. A positive correlation was found between channel eroded-area and the channel width. Therefore narrowing under conditions of low flow will reduce the amount of erosion in the reach, which, in turn, will reduce the amount of sediment transported into the lower channel. This will reduce the amount of siltation in the lower reaches of the river. However, narrowing under conditions of high flow with a low concentration of sediment will reduce both the extent of flood attenuation along the narrowed channel and the amount of lateral channel bank collapse, which results in increased flows and less sedimentation in the lower channel, leading to increased erosion. When flows with a high concentration of sediment are released from the Xiaolangdi Reservoir, both the lower narrow channel and the upper channel can transport a large amount of the sediment load. It is concluded that the narrowing of the upper broad channel will result in a reduction in sedimentation, or even in channel erosion, in both the upper and the lower channels if the reservoir is operated such that the volume of sediment added during low flows is balanced by the volume eroded during high flows with a low concentration of sediment.     

通过窄槽整治,能否使黄河下游河道不再淤积,甚至发生冲刷?（英文）

This study considered whether the narrowing of the upper(broad and wandering) reaches of the Lower Yellow River could result in a reduction in sedimentation and even an increase in channel erosion in both the upper and the lower(narrow and meandering) reaches. Analysis of field data and numerical modeling results both justify the proposal to narrow the channel. A positive correlation was found between channel eroded-area and the channel width. Therefore narrowing under conditions of low flow will reduce the amount of erosion in the reach, which, in turn, will reduce the amount of sediment transported into the lower channel. This will reduce the amount of siltation in the lower reaches of the river. However, narrowing under conditions of high flow with a low concentration of sediment will reduce both the extent of flood attenuation along the narrowed channel and the amount of lateral channel bank collapse, which results in increased flows and less sedimentation in the lower channel, leading to increased erosion. When flows with a high concentration of sediment are released from the Xiaolangdi Reservoir, both the lower narrow channel and the upper channel can transport a large amount of the sediment load. It is concluded that the narrowing of the upper broad channel will result in a reduction in sedimentation, or even in channel erosion, in both the upper and the lower channels if the reservoir is operated such that the volume of sediment added during low flows is balanced by the volume eroded during high flows with a low concentration of sediment.     

Fluvial diversity in relation to valley setting in the source region of the Yangtze and Yellow Rivers

The spatial distribution of valley setting （laterally-unconfined, partly-confined, or confined） and fluvial morphology in the source region of the Yangtze and Yellow Rivers is contrasted and analyzed. The source region of the Yangtze River is divided into 3 broad sections （I, II and III） based on valley setting and channel gradient, with the upstream and downstream sections being characterized by confined （some reaches partly-confined） valleys while the middle section is characterized with wide and shallow, laterally-unconfined valleys. Gorges are prominent in sections I and III, while braided channel patterns dominate section II. By contrast, the source region of the Yellow River is divided into 5 broad sections （sections I-V） based on valley characteristics and channel gradient. Sections I, II and IV are alluvial reaches with mainly laterally-unconfined （some short reaches partly-confined） valleys. Sections III and V are mainly confined or partly-confined. Greater morphological diversity is evident in the source region of the Yellow River relative to the upper Yangtze River. This includes braided, anabranching, anastomosing, meandering and straight alluvial patterns, with gorges in confined reaches. The macro-relief （elevation, gradient, aspect, valley alignment and confinement） of the region, linked directly to tectonic movement of the Qinghai-Tibet Plateau, tied to climatic, hydrologic and biotic considerations, are primary controls upon the patterns of river diversity in the region.     

Morphological response to river engineering and management in alluvial channels in Italy

In response to various types of human disturbance, most Italian rivers have experienced considerable channel adjustment during the last centuries and in particular in the last decades. This paper reviews all existing published studies and available data, and aims to reconstruct a general outline of the main channel adjustments that have occurred in Italian rivers during the past 100 years.Two main types of channel adjustment have been recognized: (a) incision, which is commonly on the order of 3–4 m, but in some cases is even more than 10 m; (b) narrowing, with channel width reduction up to 50% or more. In some reaches, these adjustments have led to changes in channel pattern in particular from braided to wandering.Such channel adjustments are due to several types of human intervention, particularly sediment extraction, dams and channelization. A strong temporal relationship (specifically, short reaction times) between human disturbance and channel adjustment can be inferred, but trends of adjustment are available for only a few rivers (e.g. the Po, the Arno and the Piave Rivers). These trends show that incision and/or narrowing are more intense immediately after the disturbance and then slow and become asymptotic; the same trends also suggest that larger rivers could have longer relaxation times.The results of this study are synthesised in a general classification scheme that summarises the main styles of adjustment observed in Italian rivers. According to the scheme, braided rivers adjust through prevalent narrowing with varying rates of incision, whereas single-thread rivers adjust mainly through a more pronounced incision accompanied by various amounts of narrowing. The scheme, representing initial and final (present) morphologies and not including intermediate stages of channel adjustment, will need to be tested on the basis of more detailed data to have a wider application both to the Italian context and to fluvial systems elsewhere, affected by similar types of human disturbance causing a reduction of sediment supply.     

The fluvial cycle at cold–warm–cold transitions in lowland regions: A refinement of theory

A previously established non-linear theory of river cyclicity as a response to climate change states that short phases of fluvial instability occur both at the transition from relatively warm (temperate) to cold (periglacial) and from relatively cold to warm periods. Such instability typically starts with vertical erosion, successively followed by sedimentary fill of the erosive scar. In spite of frequent confirmation of this theory by geomorphological reconstructions, a few problems arise. First, there are fewer incision phases than climatic transitions. Secondly, remnants of erosion at ‘cold–warm’ transitions are scarce, in contrast to obvious erosion relics at ‘warm–cold’ transitions. Furthermore, it appears that the incision style is strikingly different at both kinds of climatic transitions. Similarly, the long stable phases are also expressed in terms of different floodplain development in cold and warm periods. These arguments require a modification of the general non-linear theory.At the transition from relatively temperate to colder conditions, rivers transformed gradually from a regular, low-energy, single-channel course to a periodically high-energy, multi-channel type. The latter (braided) type is characterized by intense lateral movement, rather than by deep vertical erosion. This results in a well-expressed morphology of wide, extensive floodplains and terraces. In contrast, the linear and constrained, meandering channels incise with small width–depth ratio and build floodplains of limited lateral extent. Consequences are twofold: 1) the spatial limitation of the deeply incised, meandering valleys at the beginning of warm periods counts against their recognition; 2) relatively strong, lateral migration of the braided rivers removes most traces of previous (meandering) systems, which contrasts with the limited lateral activity of confined meandering channels. It means that in a ‘warm–cold–warm’ alternation generally only one phase of vertical erosion is preserved, the one that is caused by the high-energy, braided river at the start of the cold period.     

黄河下游河槽横断面调整规律及治理方式探讨

通过对影响河槽挟沙能力诸因素的分析,作者认为目前黄河下游只有河槽形态是一个人为可调节的控制河道淤积的要素。分析黄河下游河道横剖面形态的特征及其调整规律,考虑来沙组成变化、河槽综合阻力变化,计算得到黄河下游典型断面的实际挟沙能力及平均水沙条件下河槽平衡输沙横剖面,经与实际断面形态对比,得出必须以多级河槽方式缩窄7000m³/s流量以下即中、小水期的河槽,方能显着减少黄河下游河槽中的淤积的结论。这样才能真正实现潘季驯的“束水攻沙”的治黄方略。     

Geomorphic effects of rural-to-urban land use conversion on three streams in the Central Redbed Plains of Oklahoma

This research evaluates the impact of rural-to-urban land use conversion on channel morphology and riparian vegetation for three streams in the Central Redbed Plains geomorphic province (central Great Plains ecoregion) of Oklahoma. The Deep Fork Creek watershed is largely urbanized; the Skeleton Creek watershed is largely rural; and the Stillwater Creek watershed is experiencing a rapid transition from rural to urban land cover. Each channel was divided into reaches based on tributary junctions, sinuosity, and slope. Field surveys were conducted at transects in a total of 90 reaches, including measurements of channel units, channel cross-section at bankfull stage, and riparian vegetation. Historical aerial photographs were available for only Stillwater Creek watershed, which were used to document land cover in this watershed, especially changes in the extent of urban areas (impervious cover).The three streams have very low gradients (< 0.001), width-to-depth ratios < 10, and cohesive channel banks, but have incised into red Permian shales and sandstone. The riparian vegetation is dominated by cottonwoods, ash, and elm trees that provide a dense root mat on stream banks where the riparian vegetation is intact. Channels increased in width and depth in the downstream direction as is normally expected, but the substrate materials and channel units remained unchanged. Statistical analyses demonstrated that urbanization did not explain spatial patterns of changes in any variables. These three channels in the central Redbed Plains are responding as flumes during peak flows, funneling runoff and the wash-load sediment downstream in major runoff events without any effect on channel dimensions. Therefore, local geological conditions (similar bedrock, cohesive substrates and similar riparian vegetation) are mitigating the effects of urbanization.     

CHANNEL CHANGES IN ARID BADLANDS,BORREGO SPRINGS,CALIFORNIA

Geometric, hydraulic, and sediment characteristics in arid badlands near Borrego Springs, California, are examined in relation to precipitation events of varying magnitude and frequency. The longitudinal and cross profiles of five ephemeral channels occupying a 2.5 km² catchment were surveyed under pre-and post-storm conditions during the February 1976-December 1978 period. Such arid region channels offer the opportunity to observe and explain rates and methods of profile change under different flow types in a short period of time. Catchment responses to light winter events include substantial lags between initial precipitation and channel runoff, the limited downstream movement of small slugs of sediment, high losses of discharge into channel alluvium, and prolonged mass movement of debris from adjacent hillslopes into the channels following the storm events thus promoting aggradation along certain channel reaches. Responses to intense summer storms include explosive channel and hillslope runoff and localized scour and fill, both during and following such events, thereby promoting substantial aggradation and erosion along portions of the channels. Although ephemeral flow conditions may produce channel profiles which are distinct from those in perennial streams, the evaluation of the methods of sediment transport and the storage of debris in arid catchments offer useful explanation for other environments.     

Sediment rating parameters and their implications: Yangtze River, China

This study examines the characteristics of sediment rating parameters recorded at various gauging stations in the Yangtze Basin in relation to their controls. Our findings indicate that the parameters are associated with river channel morphology of the selected reaches. High b-values (> 1.600) and low log(a) values (< − 4.000) occur in the upper course of the steep rock-confined river, characterizing high unit stream power flows. Low b-values (< 0.900) and high log(a) values (> − 1.000) occur in the middle and lower Yangtze River associated with meandering reaches over low gradients, and can be taken to imply aggradation in these reaches with low stream power. Higher b-values (0.900–1.600) and lower log(a)-values (− 4.000 to − 1.000) characterize the reaches between Yichang and Xinchang, immediately below the Three Gorges. These values indicate channel erosion and bed instability that result from changes in channel gradient from the upstream steep valley to downstream low slope flood plain settings. Differences in channel morphology accompany these changes. Confined, V-shaped valleys occur upstream and are replaced downstream by broad U-shaped channels. The middle and lower Yangtze shows an apparent increase in channel instability over the past 40 years. This inference is based on sediment rating parameters from various gauging stations that record increasing b-values against decreasing log(a)-values over that time. Analysis of the sediment load data also reveals a strong correlation between changes in sediment rating curve parameters and reduction of annual sediment budget (4.70 × 10⁸ t to 3.50 × 10⁸ t/year, from the 1950s to 1990s), largely due to the damming of the Yangtze and sediment load depletion through siltation in the Dongting Lake. Short-term deviations from the general trends in the sediment rating parameters are related to hydroclimatic events. Extreme low b-values and high log(a)-values signify the major flood years, while the reverse indicates drought events. When compared with rivers from other climate settings, it is evident that the wide range of values of the Yangtze rating parameters reflects the huge discharge driven by the monsoon precipitation regime of eastern China.