From incipient island arc to doubly‐vergent orogen: A review of geodynamic models and sedimentary basin‐fills of southern Central America

Southern Central America is a Late Mesozoic/Cenozoic island arc that evolved in response to the subduction of the Farallón Plate beneath the Caribbean Plate in the Late Cretaceous and, from the Oligocene, the Cocos and Nazca Plates. Southern Central America is one of the best studied convergent margins in the world. The aim of this paper is to review the sedimentary and structural evolution of arc‐related sedimentary basins in southern Central America, and to show how the arc developed from a pre‐extensional intra‐oceanic island arc into a doubly‐vergent, subduction orogen. The Cenozoic sedimentary history of southern Central America is placed into the plate tectonic context of existing Caribbean Plate models. From regional basin analysis, the evolution of the southern Central American island arc is subdivided into three phases: (i) non‐extensional stage during the Campanian; (ii) extensional phase during the Maastrichtian‐Oligocene with rapid basin subsidence and deposition of arc‐related, clastic sediments; and (iii) doubly‐vergent, compressional arc phase along the 280 km long southern Costa Rican arc segment related to either oblique subduction of the Nazca plate, west‐to‐east passage of the Nazca–Cocos–Caribbean triple junction, or the subduction of rough oceanic crust of the Cocos Plate. The Pleistocene subduction of the Cocos Ridge contributed to the contraction but was not the primary driver. The architecture of the arc‐related sedimentary basin‐fills has been controlled by four factors: (i) subsidence caused by tectonic mechanisms, linked to the angle and morphology of the incoming plate, as shown by the fact that subduction of aseismic ridges and slab segments with rough crust were important drivers for subduction erosion, controlling the shape of forearc and trench‐slope basins, the lifespan of sedimentary basins, and the subsidence and uplift patterns; (ii) subsidence caused by slab rollback and resulting trench retreat; (iii) eustatic sea‐level changes; and (iv) sediment dispersal systems.     

Compositional variations in submarine volcanic ashes from the vicinity of the Vanuatu Island Arc: a response to ridge—arc collision?

The late Tertiary-Recent collision of the d'Entrecasteaux Zone with the Vanuatu (New Hebrides) Island Arc appears to have been associated with a shift to generally more potassic compositions. Glass shards analysed from Quaternary volcanic ashes recovered from ODP Leg 134 drill sites follow distinct shoshonitic and calc-alkaline trends, consistent with those previously recognised onshore. In the Aoba Basin (Site 832) a marked compositional change is recognised at 37 m below sea floor (mbsf). From estimates of sedimentation rates this is equivalent to an age of about 100 ka and may be associated with the development of the Central Basin volcanoes of Santa Maria, Aoba and Ambrym on fracture zones transverse to the island arc. Deeper than 37 mbsf differentiated compositions fall on a medium-K calc-alkaline trend but the associated basaltic glasses are strongly potassic. Conversely, above this level the differentiated glasses follow a shoshonitic trend but the basaltic glasses are medium-K calc-alkaline. Separate sources are envisaged, associated with subduction and rifting. Episodic subduction of the d'Entrecasteaux Zone exercises tectonic control over the release of magma from different depths. In contrast, shoshonitic glasses are sparsely represented in the Vanuatu forearc where relatively low-K calc-alkaline compositions probably correspond to the ashes in the lower part of the Aoba Basin sequence. This is consistent with their age (> 100 ka) estimated from lower sedimentation rates at these sites. The scarcity of younger shoshonitic ashes at the forearc sites is attributed to the influence of high-level westerly winds transporting ash from the Central Chain volcanoes eastwards across the North Fiji Basin.     

Subducted slabs beneath the eastern Indonesia-Tonga region: insights from tomography

Tomographic images of mantle structure beneath the region north and northeast of Australia show a number of anomalously fast regions. These are interpreted using a recent plate tectonic reconstruction in terms of current and former subduction systems. Several strong anomalies are related to current subduction. The inferred slab lengths and positions are consistent with Neogene subduction beneath the New Britain and Halmahera arcs, and at the Tonga and the New Hebrides trenches where there has been rapid rollback of subduction hinges since about 10 Ma. There are several deeper flat-lying anomalies which are not related to present subduction and we interpret them as former subduction zones overridden by Australia since 25 Ma. Beneath the Bird’s Head and Arafura Sea is an anomaly interpreted to be due to north-dipping subduction beneath the Philippines-Halmahera arc between 45 and 25 Ma. A very large anomaly extending from the Papuan peninsula to the New Hebrides, and from the Solomon Islands to the east Australian margin, is interpreted to be the remnant of south-dipping subduction beneath the Melanesian arc between 45 and 25 Ma. This interpretation implies that a flat-lying slab can survive for many tens of millions of years at the bottom of the upper mantle. In the lower mantle there is a huge anomaly beneath the Gulf of Carpentaria and east Papua New Guinea. This is located above the position where the tectonic model interprets a change in polarity of subduction from north-dipping to south-dipping between 45 and 25 Ma. We suggest this deep anomaly may be a slab subducted beneath eastern Australian during the Cretaceous, or subducted north of Australia during the Cenozoic before 45 Ma. The tomography also supports the tectonic interpretation which suggests little Neogene subduction beneath western New Guinea since no slab is imaged south of the New Guinea trench. However, one subduction zone in the tectonic model and many others, that associated with the Trobriand trough east of Papua New Guinea and the Miocene Maramuni arc, is not seen in the tomographic images and may require reconsideration of currently accepted tectonic interpretations.     

西太平洋岛弧地震分布的不均匀性及其成因问题探讨

西太平洋地震活动沿岛弧呈狭窄的带状分布,但在岛弧的延伸方向上及岛弧间存在明显的差异。岛弧两端或岛弧与海岭的交接地段震源密度较大,而岛弧中段密度较小;菲律宾海板块西侧（靠大陆）的岛弧地震活动性较强,其东侧（靠太平洋）的马里亚纳岛弧地震活动性较弱;马里亚纳弧的ＮＮＥ和ＮＥ方向段地震活动比其它的方向段弱。震源密度与地貌格局及弧前构造应力有密切联系,表明导致地震活动的构造应力可能来源于大陆向海洋的运动     

Geochemical evolution of the Dras–Kohistan Arc during collision with Eurasia: Evidence from the Ladakh Himalaya, India

Abstract   The Dras 1 Volcanic Formation of the Ladakh Himalaya, India, represents the eastern, upper crustal equivalent of the lower crustal gabbros and mantle peridotites of the Kohistan Arc exposed in Pakistan. Together these form a Cretaceous intraoceanic arc now located within the Indus Suture zone between India and Eurasia. During the Late Cretaceous, the Dras–Kohistan Arc, which was located above a north-dipping subduction zone, collided with the south-facing active margin of Eurasia, resulting in a switch from oceanic to continental arc volcanism. In the present study we analyzed samples from the pre-collisional Dras 1 Volcanic Formation and the postcollisional Kardung Volcanic Formation for a suite of trace elements and Nd isotopes. The Kardung Volcanic Formation shows more pronounced light rare earth element enrichment, higher Th/La and lower ɛ_Nd values compared with the Dras 1 Volcanic Formation. These differences are consistent with an increase in the reworking of the continental crust by sediment subduction through the arc after collision. As little as 20% of the Nd in the Dras 1 Volcanic Formation might be provided by sources such as the Karakoram, while approximately 45% of the Nd in the Kardung Volcanic Formation is from this source. However, even before collision, the Dras–Kohistan Arc shows geochemical evidence for more continental sediment contamination than is seen in modern western Pacific arcs, implying its relative proximity to the Eurasian landmass. Comparison of the lava chemistry in the Dras–Kohistan Arc with that in the forearc turbidites suggests that these sediments are partially postcollisional, Jurutze Formation and not all pre-collisional Nindam Formation. Thus, the Dras–Eurasia collision can be dated as Turonian–Santonian (83.5–93.5 Ma), older than it was previously considered to be, but consistent with radiometric ages from Kohistan.     

Cenozoic geodynamic evolution of the Andaman–Sumatra subduction margin: Current understanding

The Andaman–Sumatra margin displays a unique set‐up of extensional subduction–accretion complexes, which are the Java Trench, a tectonic (outer arc) prism, a sliver plate, a forearc, oceanic rises, inner‐arc volcanoes, and an extensional back‐arc with active spreading. Existing knowledge is reviewed in this paper, and some new data on the surface and subsurface signatures for operative geotectonics of this margin is analyzed. Subduction‐related deformation along the trench has been operating either continuously or intermittently since the Cretaceous. The oblique subduction has initiated strike–slip motion in the northern Sumatra–Andaman sector, and has formed a sliver plate between the subduction zone and a complex, right‐lateral fault system. The sliver fault, initiated in the Eocene, extended through the outer‐arc ridge offshore from Sumatra, and continued through the Andaman Sea connecting the Sagaing Fault in the north. Dominance of regional plate dynamics over simple subduction‐related accretionary processes led to the development and evolution of sedimentary basins of widely varied tectonic character along this margin. A number of north–south‐trending dismembered ophiolite slices of Cretaceous age, occurring at different structural levels with Eocene trench‐slope sediments, were uplifted and emplaced by a series of east‐dipping thrusts to shape the outer‐arc prism. North–south and east–west strike–slip faults controlled the subsidence, resulting in the development of a forearc basins and record Oligocene to Miocene–Pliocene sedimentation within mixed siliciclastic–carbonate systems. The opening of the Andaman Sea back‐arc occurred in two phases: an early (～11 Ma) stretching and rifting, followed by spreading since 4–5 Ma. The history of inner‐arc volcanic activity in the Andaman region extends to the early Miocene, and since the Miocene arc volcanism has been associated with an evolution from felsic to basaltic composition.     

Slip partitioning along major convergent plate boundaries

Along plate boundaries characterized by oblique convergence, earthquake slip vectors are commonly rotated toward the normal of the trench with respect to predicted plate motion vectors. Consequently, relative plate motion along such convergent margins must be partitioned between displacements along the thrust plate interface and deformation within the forearc and back-arc regions. The deformation behind the trench may take the form of strike-slip motion, back-arc extension, or some combination of both. We observe from our analysis of the Harvard Moment Tensor Catalog that convergent arcs characterized by back-arc spreading, specifically the Marianas and New Hebrides, are characterized by a large degree of slip partitioning. However, the observed rates, directions, and location of back-arc spreading are not sufficient to account for degree of partitioning observed along the respective arcs, implying that the oblique component of subduction is also accommodated in part by shearing of the overriding plate. In the case of the Sumatran arc, where partitioning is accommodated by strike-slip faulting in the overriding plate, the degree of partitioning is similar to that observed along the Marianas, but the result is viewed with caution because it is based on a predicted plate motion vector that is based on locally derived earthquake slip vectors. In the case of the Alaskan-Aleutian arc, where back-arc spreading is also absent, the degree of partitioning is less and rotation of slip vectors toward the trench normal appears to increase linearly as a function of the obliquity of convergence. If partitioning in the Alaskan-Aleutian arc is accommodated by strike-slip faulting within the upper plate, the positive relationship between obliquity of convergence and the rotation of earthquake slip vectors to the trench normal may reflect that either (1) the ratio of the depth extent of strike-slip faults behind the trenchZ _s to the subduction thrustZ _t increases westward along the arc, (2) the dip of the subduction thrust increases westward along the arc, or (3) the strength of the subduction thrust decreases westward along the arc.     

Effects of relative plate motion on the deep structure and penetration depth of slabs below the Izu-Bonin and Mariana island arcs

An increasing number of seismological studies indicate that slabs of subducted lithosphere penetrate the Earth's lower mantle below some island arcs but are deflected, or, rather, laid down, in the transition zone below others. Recent numerical simulations of mantle flow also advocate a hybrid form of mantle convection, with intermittent layering. We present a multi-disciplinary analysis of slab morphology and mantle dynamics in which we account explicitly for the history of subduction below specific island arcs in an attempt to understand what controls lateral variations in slab morphology and penetration depth. Central in our discussion are the Izu-Bonin and Mariana subduction zones. We argue that the differences in the tectonic evolution of these subduction zones—in particular the amount and rate of trench migration—can explain why the slab of subducted oceanic lithosphere seems to be (at least temporarily) stagnant in the Earth's transition zone below the Izu-Bonin arc but penetrates into the lower mantle below the Mariana arc. We briefly speculate on the applicability of our model of the temporal and spatial evolution of slab morphology to other subduction zones. Although further investigation is necessary, our tentative model shows the potential for interpreting seismic images of slab structure by accounting for the plate-tectonic history of the subduction zones involved. We therefore hope that the ideas outlined here will stimulate and direct new research initiatives.     

Origin of the early Cenozoic belt boundary thrust and Izanagi–Pacific ridge subduction in the western Pacific margin

The belt boundary thrust within the Cretaceous–Neogene accretionary complex of the Shimanto Belt, southwestern Japan, extends for more than ~ 1 000 km along the Japanese islands. A common understanding of the origin of the thrust is that it is an out of sequence thrust as a result of continuous accretion since the late Cretaceous and there is a kinematic reason for its maintaining a critically tapered wedge. The timing of the accretion gap and thrusting, however, coincides with the collision of the Paleocene–early Eocene Izanagi–Pacific spreading ridges with the trench along the western Pacific margin, which has been recently re‐hypothesized as younger than the previous assumption with respect to the Kula‐Pacific ridge subduction during the late Cretaceous. The ridge subduction hypothesis provides a consistent explanation for the cessation of magmatic activity along the continental margin and the presence of an unconformity in the forearc basin. This is not only the case in southwestern Japan, but also along the more northern Asian margin in Hokkaido, Sakhalin, and Sikhote‐Alin. This Paleocene–early Eocene ridge subduction hypothesis is also consistent with recently acquired tomographic images beneath the Asian continent. The timing of the Izanagi–Pacific ridge subduction along the western Pacific margin allows for a revision of the classic hypothesis of a great reorganization of the Pacific Plate motion between ~ 47 Ma and 42 Ma, illustrated by the bend in the Hawaii–Emperor chain, because of the change in subduction torque balance and the Oligocene–Miocene back arc spreading after the ridge subduction in the western Pacific margin.     

The migration history of the Nazca Ridge along the Peruvian active margin: a re-evaluation

The collision zone of the 200 km wide and 1.5 km high Nazca Ridge and the Peruvian segment of the convergent South American margin between 14°S and 17°S is characterized by deformation of the upper plate and several hundred meters of uplift of the forearc. This is evident by a narrowing of the shelf, a westward shift of the coastline and the presence of marine terraces. As the Nazca Ridge is oblique with respect to both trench and convergence direction of the Nazca Plate, it migrates southward along the active plate boundary. For reconstructing the migration history of the Nazca Ridge, this study uses updated plate motion data, resulting from a revision of the geomagnetic time scale. The new model suggests that the ridge crest moved laterally parallel to the margin at a decreasing velocity of ∼75 mm/a (before 10.8 Ma), ∼61 mm/a (10.8-4.9 Ma), and ∼43 mm/a (4.9 Ma to present). Intra-plate deformation associated with mountain building in the Peruvian Andes since the Miocene reduces the relative convergence rate between Nazca Plate and Peruvian forearc. Taking an intra-plate deformation at a rate of ∼10 mm/a, estimated from space-geodetic and geological data, into account, does not significantly reduce these lateral migration velocities. Constraining the length of the original Nazca Ridge by its conjugate feature on the Pacific Plate yields a length of 900 km for the subducted portion of the ridge. Using this constraint, ridge subduction began ∼11.2 Ma ago at 11°S. Therefore, the Nazca Ridge did not affect the northern sites of Ocean Drilling Program (ODP) Leg 112 located at 9°S. This is supported by benthic foraminiferal assemblages in ODP Leg 112 cores, indicating more than 1000 m of subsidence since at least Middle Miocene time, and by continuous shale deposition on the shelf from 18 to 7 Ma, recorded in the Ballena industrial well. At 11.5°S, the model predicts the passage of the ridge crest ∼9.5 Ma ago. This agrees with the sedimentary facies and benthic foraminiferal stratigraphy of ODP Leg 112 cores, which argue for deposition on the shelf in the Middle and Late Miocene with subsequent subsidence of a minimum of several hundred meters. Onshore at 12°S, the sedimentary record shows at least 500 m uplift prior to the end of the Miocene, also in agreement with the model.     

Slab melt as metasomatic agent in island arc magma mantle sources, Negros and Batan (Philippines)

Abstract Two new cases of association of adakites with ‘normal’ island arc lavas and transitional adakites are recognized in the islands of Batan and Negros in northern and central Philippines, respectively. The Batan lavas are related to the subduction of the middle Miocene portion of the South China Sea basin along the Manila trench; those of Negros come from the almost aseismic subduction of the middle Miocene Sulu Sea crust along the Negros trench. The occurrence of the Batan adakites is consistent with previous findings showing adakitic glass inclusions within minerals of mantle xenoliths associated with Batan arc lavas. The similarity of adakite ages (1.09 Ma) and that of the metasomatized xenoliths (1 Ma) suggests that both are linked to the same slab‐melting and metasomatic event. Earlier Sr, Pb and Nd‐isotopic studies, however, also reveal the presence of an important sediment contribution to the Batan lava geochemistry. Thus, the role played by slab melts, assumed to have mid‐ocean ridge basalts‐like (MORB) isotopic characteristics, in enriching the Batan subarc mantle is largely masked by the sediment input. The Negros adakites are present only in Mount Cuernos, the volcanic center nearest to the Negros trench. Batch partial melting calculations show that the Negros adakites could be derived from a garnet amphibolitic source with normal‐MORB (N‐MORB) geochemistry. This is supported by the MORB‐like isotopic characteristics of the Mount Cuernos lavas. The volcanic rocks from the other volcanoes consist of normal arc and transitional adakitic lavas that have slightly higher Sr‐ and Pb‐isotopic ratios, probably due to slight sediment input. Mixing of adakites and normal arc lavas to produce transitional adakites is only partly supported by trace element geochemistry and not by field evidence. The transitional adakites can be modeled as partial melts of an adakite‐enriched mantle. Trace element enrichment of non‐adakitic lavas could reflect the interaction of their mantle source with uprising slab melts, as metasomatic mantle minerals scavenge certain trace elements from the adakitic fluids. Therefore, in arcs beneath which thick (up to 2 km) continent‐derived detrital sediments are involved in subduction, like in Batan, the sediment signature can overwhelm the slab melt input. In arcs like Negros where slow subduction could cause a more efficient scraping of thinner (approximately 1 km) detrital sediments, the contribution of slab melts is easier to detect.     

Geochemistry of volcanic glass from Oligocene detrital sediments at DSDP Site 296, Kyushu Palau Ridge: Interpreting the magmatic evolution of the early northern Izu–Bonin–Mariana Island Arc

Understanding the petrologic and geochemical evolution of island arcs is important for interpreting the timing and impacts of subduction and processes leading to the formation of a continental crust. The Izu–Bonin–Mariana (IBM) Arc, western Pacific, is an outstanding location to study arc evolution. The IBM first arc (45–25 Ma) followed a period of forearc basalt and boninite formation associated with subduction initiation (52–45 Ma). In this study, we present new major and trace element data for the IBM first arc from detrital glass shards and clasts from DSDP Site 296, located on the northernmost Kyushu Palau Ridge (KPR). We synthesize these data with published literature for contemporaneous airfall ash and tephra from the Izu–Bonin forearc, dredge and piston core samples from the KPR, and plutonic rocks from the rifted eastern KPR escarpment, locations which lie within or correlate with KPR Segment 1 of Ishizuka, Taylor, Yuasa, and Ohara (2011). Our objective is to test ways in which petrologic and chemical data for diverse igneous materials can be used to construct a complete picture of this section of the Oligocene first arc and to draw conclusions about its evolution. Important findings reveal that widely varying primary magmas formed and differentiated at various depths at this location during this period. Changes in key trace element ratios such as La/Sm, Nb/Yb, and Ba/Th show that mantle sources varied in fertility and in the inputs of subducted sediment and fluids over time and space. Plutonic rocks appear to be related to early K‐poor dacitic liquids represented by glasses sampled both in the forearc and volcanic fronts. An interesting observation is that the variation in magma compositions in this relatively small segment encompasses that inferred for the IBM Arc as a whole, suggesting that sampling is a key factor in inferring temporal, across‐arc, and along‐strike geochemical trends.     

Arc–arc collision in the Izu collision zone, central Japan, deduced from the Ashigara Basin and adjacent Tanzawa Mountains

The Pleistocene Ashigara Basin and adjacent Tanzawa Mountains, Izu collision zone, central Japan, are examined to better understand the development of an arc–arc orogeny, where the Izu–Bonin – Mariana (IBM) arc collides with the Honshu Arc. Three tectonic phases were identified based on the geohistory of the Ashigara Basin and the denudation history of the Tanzawa Mountains. In phase I, the IBM arc collided with the Honshu Arc along the Kannawa Fault. The Ashigara Basin formed as a trench basin, filled mainly by thin-bedded turbidites derived from the Tanzawa Mountains together with pyroclastics. The Ashigara Basin subsided at a rate of 1.7 mm/year, and the denudation rate of the Tanzawa Mountains was 1.1 mm/year. The onset of Ashigara Basin Formation is likely to be older than 2.2 Ma, interpreted as the onset of collision along the Kannawa Fault. Significant tectonic disruption due to the arc–arc collision took place in phase II, ranging from 1.1 to 0.7 Ma in age. The Ashigara Basin subsided abruptly (4.6 mm/year) and the accumulation rate increased to approximately 10 times that of phase I. Simultaneously, the Tanzawa Mountains were abruptly uplifted. A tremendous volume of coarse-grained detritus was provided from the Tanzawa Mountains and deposited in the Ashigara Basin as a slope-type fan delta. In phase III, 0.7–0.5 Ma, the entire Ashigara Basin was uplifted at a rate of 3.6 mm/year. This uplift was most likely caused by isostatic rebound resulting from stacking of IBM arc crust along the Kannawa Fault which is not active as the decollement fault by this time. The evolution of the Ashigara Basin and adjacent Tanzawa Mountains shows a series of the development of the arc–arc collision; from the subduction of the IBM arc beneath the Honshu Arc to the accretion of IBM arc crust onto Honshu. Arc–arc collision is not the collision between the hard crusts (massif) like a continent–continent collision, but crustal stacking of the subducting IBM arc beneath the Honshu Arc intercalated with very thick trench fill deposits.     

Late Carboniferous – Middle Permian arc/forearc‐related basin in Central Asian Orogenic Belt: Insights from the petrology and geochemistry of the Shuangjing Schist in Inner Mongolia,China

The Solonker Suture Zone is thought to record the terminal evolution of the Central Asian Orogenic Belt (CAOB) in Inner Mongolia. However, two contrasting interpretations of the timing of suturing of the Solonker Suture Zone exist: (i) Permian to Early Triassic; and (ii) Middle Devonian or Late Devonian to Carboniferous. The Shuangjing Schist is exposed in the Linxi area along the Xar Moron Fault Zone, which marks the southern boundary of the Solonker Suture Zone in the eastern section of the CAOB, and thus provides insight into the timing of suturing of the Solonker Suture Zone. Detailed and systematic analysis of the petrology and geochemistry of the Shuangjing Schist shows that the Shuangjing Schist developed by greenschist facies prograde metamorphism of a volcanisedimentary rock series protolith. The volcanic parts of the Shuangjing Schist are a calc‐alkaline series with large volumes of intermediate members and subordinate acidic members. Volcanism occurred in a magmatic arc on the continental margin and was induced by subduction‐related magmatism resulting from mantle metasomatism. The sedimentary parts of the Shuangjing Schist reflect a transition from continental shelf to abyssal plain sedimentation. The formation of the Shuangjing Schist is suggested to be related to closure of an arc/forearc‐related ocean basin. The timing is constrained by a laser ablation inductively coupled plasma–mass spectrometry (LA‐ICP–MS) U–Pb magmatic zircon age of 298 ± 2 Ma from a carbonaceous biotite–plagioclase schist that was intruded by granite at 272 ± 2 Ma. In the Linxi area, southward subduction of the arc/forearc basin led to uplift, thickening, collapse, and erosion of the overriding continental crust. Collapse induced extension and widespread magmatism along the volcanic arc at the northern margin of the North China Craton. The closure of the arc/forearc‐related oceanic basin led to the formation of Late Permian to Middle Triassic collisional granites and the subsequent end of the collision of the Solonker Suture Zone.     

Upper Pleistocene uplifted shorelines as tracers of (local rather than global) subduction dynamics

Past studies have shown that high coastal uplift rates are restricted to active areas, especially in a subduction context. The origin of coastal uplift in subduction zones, however, has not yet been globally investigated. Quaternary shorelines correlated to the last interglacial maximum (MIS 5e) were defined as a global tectonic benchmark (Pedoja et al., 2011). In order to investigate the relationships between the vertical motion and the subduction dynamic parameters, we cross-linked this coastal uplift database with the “geodynamical” databases from Heuret (2005), Conrad and Husson (2009) and Müller et al. (2008). Our statistical study shows that: (1) the most intuitive parameters one can think responsible for coastal uplift (e.g., subduction obliquity, trench motion, oceanic crust age, interplate friction and force, convergence variation, dynamic topography, overriding and subducted plate velocity) are not related with the uplift (and its magnitude); (2) the only intuitive parameter is the distance to the trench which shows in specific areas a decrease from the trench up to a distance of ∼300 km; (3) the slab dip (especially the deep slab dip), the position along the trench and the overriding plate tectonic regime are correlated with the coastal uplift, probably reflecting transient changes in subduction parameters. Finally we conclude that the first order parameter explaining coastal uplift is small-scale heterogeneities of the subducting plate, as for instance subducting aseismic ridges. The influence of large-scale geodynamic setting of subduction zones is secondary.     

Migration of a volcanic front inferred from K–Ar ages of late Miocene to Pliocene volcanic rocks in central Japan

K–Ar ages have been determined for 14 late Miocene to Pliocene volcanic rocks in the north of the Kanto Mountains, Japan, for tracking the location of the volcanic front through the time. These samples were collected from volcanoes located behind the trench–trench–trench (TTT) triple junction of the Pacific, Philippine Sea, and North American plates. This junction is the site of subduction of slabs of the Pacific and the Philippine Sea plates, both of which are thought to have influenced magmatism in this region. The stratigraphy and K–Ar ages of volcanic rocks in the study area indicate that volcanism occurred between the late Miocene and the Pliocene, and ceased before the Pleistocene. Volcanism in adjacent areas of the southern NE Japan and northern Izu–Bonin arcs also occurred during the Pliocene and ceased at around 3 Ma with the westward migration of the volcanic front, as reported previously. Combining our new age data with the existing data shows that before 3 Ma the volcanic front around the TTT junction was located about 50 km east of the preset‐day volcanic front. We suggest that northward subduction of the Philippine Sea Plate slab ended at ～3 Ma as a result of collision between the northern margin of the plate with the surface of the Pacific Plate slab. This collision may have caused a change in the subduction vector of the Philippine Sea Plate from the original north‐directed subduction to the present‐day northwest‐directed subduction. This indicates that the post ～3 Ma westward migration of the volcanic front was a result of this change in plate motion.     

Geochemistry of basaltic and gabbroic rocks from the West Mariana basin and the Mariana trench

This paper describes the chemistry of 33 basaltic rocks dredged from the West Mariana basin and from the Mariana trench during the R/V “Dmitry Mendeleev” 1976 cruise in the western Pacific.The shipboard investigations were carried out by an international working group of 66 earth scientists under the IGCP Project “Ophiolites” and sponsored by the U.S.S.R. Academy of Sciences, Moscow. The purpose of the expedition was to investigate the structure and composition of the oceanic crust of marginal basins, remnant island arcs and deep-sea trenches. Tholeiitic basalts and gabbros as well as ultramafic rocks in various stages of alteration were dredged from the central part of the West Mariana basin demonstrating the presence of oceanic crust.The Pacific slope of the Mariana trench yielded altered basaltic rocks of tholeiitic and alkalic (? trachybasaltic to shoshonitic) composition. The lower part of the island arc slope contains typical tholeiitic basalts, dolerites and gabbros as well as ultramafics associated with flysch-type sediments. This is strong evidence for the formation of an “ophiolite-schuppenzone”, probably due to subduction of Pacific oceanic crust.Associated with these rocks are amygdaloidal, highly magnesian lavas (similar to boninites), which have not been recognized previously in oceanic ridge basalts.These rocks (together with the dolerites) are interpreted as parts of the Mariana island arc and are thought to be the first stage of island arc development (an immature island arc).     

Tectonics of an Early Carboniferous forearc inferred from a high-P/T schist-bearing conglomerate in the Nedamo Terrane, Northeast Japan

The Nedamo Terrane, an Early Carboniferous accretionary complex, is the oldest biostratigraphically dated accretionary complex in Japan. The purpose of this study is to describe and interpret a conglomerate from the Nedamo Terrane that contains clasts of high-pressure/low-temperature (high- P/T ) schist (mainly garnet-bearing phengite schist) and ultramafic rock, and to infer the tectonics of an Early Carboniferous arc–trench system at the eastern margin of the paleo-Asian continent. Clasts of high- P/T schist and ultramafic rock within the conglomerate make up 8.4 and 6.7% of the total clasts, respectively, based on modal counts. These clasts are subangular to subrounded, whereas volcanic clasts are well rounded. The source of the schist clasts, which yield a radiometric age of 347–317 Ma, is considered to be the Renge Metamorphic Rocks of Southwest Japan or equivalent rocks. Based on the chemical composition of chromian spinel, the source of ultramafic clasts is inferred to be the island-arc-type Ordovician Miyamori and Hayachine ultramafic complexes in the Kitakami Massif. The conglomerate records multiple provenance regions, including an island arc (South Kitakami Terrane) and a forearc ridge; the high P/T schist and ultramafic rocks were exhumed in the forearc region. The duration of the interval from the early stages of exhumation of the schist to its deposition in the trench as clasts is estimated to have been less than 30 my.     

Japan Trench and tectonics of the Japanese Island Arcs

Abstract Seven chronostratigraphic stages were established based on the correlation of magneto‐biostratigraphic marker horizons within the Deep Sea Drilling Project and Ocean Drilling Program cores from the forearc of the Japan Trench. Because the stages are coeval with changes in the rate of sedimentation, lithofacies, magnetic intensity and composition of fossil assemblages, they probably reflect the tectonic situation in the Japan Trench forearc and also in the arc–trench system. The stages correlate to the tectonic events of the Japanese Island Arcs; for example, evolution of the Boso triple junction, initiation of Philippine Sea Plate subduction and the Japan Sea opening.     

白云深水区新生代沉降及岩石圈伸展变形

为认识白云深水区新生代构造沉降和岩石圈伸展变形特征,本文对过研究区的两条测线进行了回剥分析和伸展系数计算,结果表明:白云深水区新生代构造沉降具有幕式特点,由快到慢共分4幕:①65～24.4 Ma;②24.4～18.5 Ma;③18.5～13.8 Ma;④13.8～0 Ma,在裂后存在3期快速沉降(24.4～21Ma,1...