Quantitative relationship between surface sedimentary diatoms and water depth in North-Central Bohai Bay,China

To study the quantitative relationship between surface sedimentary diatoms and water depth, 67 surface samples were collected for diatom analysis on eight profiles with water depth variation from the muddy intertidal zone to the shallow sea area in North-Central Bohai Bay, China. The results showed that the distribution of diatoms changed significantly in response to the change in water depth. Furthermore, the quantitative relationship between the distribution of dominant diatom species, their a...     

An Analysis for Cross Beam-Ground Anchor Reinforcement

With the rapid development of water facilities, hydroelectric projects, highways and railways in China, beam-anchor reinforcement has been widely used to stabilize slopes in recent years. But the theory for the design of beam-anchor reinforcement is far behind the application. Cross beam-ground anchor reinforcement is a combination of beams and anchors forming a new structure to prevent slope sliding. The forces in the beams are discussed using theoretical analysis and numerical modeling. The Winkler model is used to analyze the beams, and reasonable values of λ, length, spacing and cantilevered length for the beams are determined through a theoretical analysis. A three-dimensional finite element method is adopted to model the interaction of the beams and soils and a structure analysis is applied to treat the beams and to study the stress distribution in external and internal beams. The analytical results show that it is better to satisfy λ≥2π, the spacing between anchors ls should be lsλ<π/2 and cantilever length should be (0.3-0.5)ls for the optimum design. The numerical results show that the same design can be used for all beams in different directions, including the internal and external beams. The application of the analytical method for reinforcement beam analysis is acceptable. It is better to choose a safety coefficient of 1.3 for design based on the analytical method for safety.     

A Mineralogical Study of Diatomite in Leizhou Peninsula

In this paper diatomite samples taken from the Leizhou Peninsula have been studied by chemical analysis, DTA, TG, XRD, IR ,SEM and X-ray Energy Spectroscopy.The study shows that the diatomaceous genera and species and their organic contents are variable with buried depth ,from Melosira to Stephanodiscus and then to Cyclotella. Various impurities in the samples, such as quartz, kaolinite and montmorillonite indicate different sedimentary environments. When heated, the diatom would change in shape due to the phase transformation in which amorphous silica crystallized from disordered opal to ordered cristobalite. The temperatures of phase transformation are different for various diatoms due to the presence of different impurities and constituents of diatomaceous genera and species.     

The Influx of the Tsushima Current into the Central Ulleung Basin of East Sea (Sea of Japan), Korea

A total of 85 samples, collected from the UBGH1-9 core taken from the Ulleung Basin, East Sea, Korea, were analyzed using diatom assemblages. 111 diatom species belonging to 46 genera were identified, and three diatom assemblage zones were established on the basis of occurrence and distribution pattern of diatoms. Diatom assemblage zone I(134.10–174 m) is characterized by a relatively high abundance of marine species, while the increased number of the brackish species is recorded in diatom assemblage zone II(75–125 m). The assemblage zones IIIa became drastic drop of valve abundances and brackish planktons, whereas it became increase during the IIIb. High Td values which indicate an influence of warm current are recorded both in diatom assemblage zone I and III, and low Td values in diatom assemblage zone II. Analysis of diatom assemblages indicating that the depositional condition moved from oceanic to littoral-neritic environments and that paleotemperature underwent a shift from warm to cold condition at the middle interval, and from cold to warm condition in the upper interval of the UBGH1-9 core. This suggests that the lower(130–162 m) and upper intervals(0–20 m) of the UBGH1-9 core were deposited in the warm current condition(Tsushima Warm Current).     

Stratigraphic Division and Correlation of the Nihewan Beds by Multivariate Statistical Analysis

Described in paper is the principle of optimal partitioning method for stratigraphic division and correlation.The Nihewan Beds are taken for example to show how to apply this approach in stratigraphic division and correlation.The semiquantitative spectral analysis data on aggregate trace elements in 324 samples taken from the nine sections in the Nihewan Basin are treated with multivariate statistical method for stratigraphic division and correlation.First ,the data from all the sections are respectively calculated by the optimal partitioning method to establish the stratigraphic boundaries.The optimal partitioning method has proved itself to be applicable to stratigraphic division and correlation. In our practice the Nihewan Beds are divided into five zones (I-V).Zone I includes subzones Ia and Ib,Zones Ia,Ib,II and III are considered to be corresponding to the Pliocene(N2),the early Early Pleistocene,the late Early Pleistocene,and the Middle Pleistocene,respectively .Zones IV and V are probably Late Pleistocene in age.This indicated that sediments deposited con-temporaneous in the sections of the same basin are similar in geochemical characteristics,although dif-ferent in geographical location.However,the sediments also show some variations ,with a transitional relationship from one section to another .For example ,in Zone II,the sediments of the Xiaodukou section show not only the characteristics of the Nangou-Hongya and Hutouliang sections,but also those of the Xiashagou,Shixiaxi,Shixiadong and Wulitai sections.It can be seen from the above that the zones can be characteristically correlated with one another.In addition the feasibility of the optimal partitioning method is also described in the present paper.     

Column test-based features analysis of clogging in artificial recharge of groundwater in Beijing

With the completion of South-North Water Transfer Project in China, plenty of high quality water will be transported to Beijing. To restore the groundwater level in Beijing, part of transferred water is planned to be used for artificial recharge. Clogging is an unavoidable challenge in the artificial recharge process. Therefore, a test is designed to analyse clogging duration and scope of influence and to test the reinjection properties of different recharge media. The test employs the self-designed sand column system with variable spacing and section monitoring, composed of four parts: Sand column, water-supply system, pressure-test system and flow-test system, to simulate the clogging of artificial recharge of sand and gravel pits. The hydraulic conductivity levels of all sand column sections are obtained to analyse the clogging of the injection of different concentrations in media of different particle sizes. In this experiment, two kinds of media are used–round gravel from sand and gravel pit in Xihuang village and the sand from sand and gravel pit by the Yongding River. The concentrations of recharge fluid are respectively 0.5 g/L and 1 g/L. The results show that clogging usually lasts for 20 hrs., and the hydraulic conductivity drops to the original 10%. Clogging usually occurs at 0–12 cm section of the sand column. The scope of influence is 0–60 cm. In column 3 and 4, whose average particle sizes are larger, section 20–50 cm also suffers from clogging, apart from section 0–12 cm. The effective recharge times are respectively 33 hrs. in column 1, 14 hrs. in column 2, 12 hrs. in column 3 and 12 hrs. in column 4. The larger the average particle size is, the quicker the clogging occurs. In media of larger particles, the change in suspension concentration does not have significant influence on the development of clogging. In conclusion, it is suggested that during artificial recharge, the conditions of reinjection medium should be fully considered and effective method of recharge be employed in order to improve effective recharge time.     

Oxygen Isotope Fractionation in TiO2 Polymorphs and Application to Geothermometry of Eclogites

Oxygen isotope fractionation in TiO2 polymorphs has been calculated by the modi-fied increment method .The results that rutile is enriched in ^18O relative to brookite but depleted in ^18O relative to anatase.Due to the same crystal structure ,oxygen isotope partitioning in the TiO2 polymorphs is determined by the cation-oxygen inter-atomic distances.The theoretical calibrations involving rutile are in fair agreement with known experimental measurements and empirical estimates.Application of the theoretic-cal quartz-rutile calibration to geothermometry of natural eclogite assemblages indicates the preservation of isotopic equilibrium at high temperatures.The isotopic temperatures calculated are only slightly lower than the non-isotopic temperatures,indicating the slow rates of exchange for oxygen diffusion in rutile.The kinetics of exchange for oxygen diffu-sion in rutile is accordingly estimated by reconciling the differences between the isotopic and the non-isotopic temperatures.The rates of exchange for oxygen diffusion in rutile should be smaller than those for hornblende,but may be equal to or greater than those for diopside.     

Speciation and potential remobilization of heavy metals in sediments of the Taihu Lake, China

The species of Cu, Pb, Zn, Cd and Cr in sediments of the Taihu Lake, China, have been analyzed using the sequential chemical extraction method. Variations in the chemical fractions of these metals and their geographic distributions have also been studied. For all five metals, the residual fraction is highest but the exchangeable fraction is lowest among all the fractions. Compared to other metals, Cd has the highest percentage in the exchangeable fraction, and Cr is associated mainly with the residual fraction. Cu in the organic fraction and Pb in the Fe-Mn fraction are the important species, whereas the lowest percentages are found for Cd in the organic fraction, Cu in the Fe-Mn oxide fraction and Pb in the carbonate fraction. With respect to spatial differences, the total contents in the non-residual fractions of the metals in bay sediments are found to be higher than those in other sediments. The fractions of Cd, Cu and Cr showed significant variations in different regions. The fractions of Pb and Zn, however, did not show significant variations in spatial distribution, suggesting different amounts and different paths of anthropogenic input for the metals. Comparisons of the metal speciation indicated that Cd might be the most bioavailable metal, followed by Pb.     

A new schedule for copper chemical speciation analysis in soil and water sediment

The speciation of heavy metals is very important to evaluate their environmental impact. This issue has become an interested topic many decades ago and many significative studies were carried out such as direct detecting, calculation with mathematical model represented in recent years as well as Tessier＇s work in 1979, BCR＇s work in 1993, etc. In all of them, the methods recommended by Tessier and BCR are most often used in practical study today. But it should be seen that experimental schedule and agents define these methods including BCR＇s method, which improved on Tessier＇s method, only. In many cases, there always are deviations between analytical results and real content of the speciation. Otherwise, steps of the extraction experiment are always strict and excessive in the experimental process. The method, which is fitting to extract the speciation of bioavailability and easy to assess the effect of metals in the environment, is very anticipant. In this paper, the sequential three steps schedule of speciation analysis of copper in soil and water sediment is discussed as an example based on the comparative results of experimental analysis with the schedules of BCR＇s （mended by Rauret et al. in 1999） and TDPA （diethylenetriamine pentacetic acid） extraction, respectively. The results from sequential three steps method and other methods recommended by prevenient work suggest that the analytical schedule of sequential three steps of separating speciation （the speciation of easy effect to life-form, the speciation available to life-form, and the speciation of no effect to life-form） is valuable for copper speciation analysis in soil and sediment. Because of easy process and saving time to evaluate its availability for life form,     

一种新的分层冻胀量观测方法及其在季节冻土区的应用

Observation of delamination frost-heave is of significance in the study of foundation frost damage. The three main methods of observing delamination frost-heave, which are mono-frost-heave-ruler method, multi-frost-heave-ruler method and magnetic-loop method, are briefly introduced in this paper at first. Their respective advantages and disadvantages are analyzed. And then, according to the mechanism of frost-heave and the law of water migration and ice-forming in the freezing soil, a new approximate indirect method of observing the delamination frost-heave, which is antitheses, is brought forward by comparing surface frost-heave and frost-depth. On the basis of observation result in Chengyu Expressway and Daqing, its applicability is analyzed from three aspects under different groundwater level and soil property in seasonal frozen area. The result shows that this method is applicable for these two areas.