Slope-confined submarine canyons in the Baiyun deep-water area,northern South China Sea: variation in their modern morphology

On the basis of newly collected multibeam bathymetric data, chirp profiles and existing seismic data, we presented a detailed morphological interpretation of a series of slope-confined canyons in water depths of 300–2000 m in the Baiyun deep-water area, northern margin of the South China Sea. Although these canyons are commonly characterized by regular spacing and a straight-line shape, they vary in their lengths, starting and ending water depths, canyon relief, slope gradients, wall slope gradients and depth profiles along the axis. The eastern canyons (C1–C8) have complex surface features, low values in their slope gradient, canyon relief and wall slope gradient and high values in their length and starting and ending depth contrasting to the western ones (C9–C17). From the bathymetric data and chirp profiles, we interpret two main processes that have controlled the morphology and evolution of the canyons: axial incision and landsliding. The western part of the shelf margin where there were at least four stages of submerged reefs differs from the eastern part of the shelf margin where sedimentary undulations occurred at a water depth of ~650 m. We consider that the variation in morphology of submarine canyons in the study area is the result of multiple causes, with the leading cause being the difference in stability of the upper slope which is related to the submerged reefs and sedimentary undulations.     

Depositional characteristics and spatial distribution of deep-water sedimentary systems on the northwestern middle-lower slope of the Northwest Sub-Basin, South China Sea

Based upon 2D seismic data, this study confirms the presence of a complex deep-water sedimentary system within the Pliocene-Quaternary strata on the northwestern lower slope of the Northwest Sub-Basin, South China Sea. It consists of submarine canyons, mass-wasting deposits, contourite channels and sheeted drifts. Alongslope aligned erosive features are observed on the eastern upper gentle slopes (<1.2° above 1,500 m), where a V-shaped downslope canyon presents an apparent ENE migration, indicating a related bottom current within the eastward South China Sea Intermediate Water Circulation. Contourite sheeted drifts are also generated on the eastern gentle slopes (~1.5° in average), below 2,100 m water depth though, referring to a wide unfocused bottom current, which might be related to the South China Sea Deep Water Circulation. Mass wasting deposits (predominantly slides and slumps) and submarine canyons developed on steeper slopes (>2°), where weaker alongslope currents are probably dominated by downslope depositional processes on these unstable slopes. The NNW–SSE oriented slope morphology changes from a three-stepped terraced outline (I–II–III) east of the investigated area, into a two-stepped terraced (I–II) outline in the middle, and into a unitary steep slope (II) in the west, which is consistent with the slope steepening towards the west. Such morphological changes may have possibly led to a westward simplification of composite deep-water sedimentary systems, from a depositional complex of contourite depositional systems, mass-wasting deposits and canyons, on the one hand, to only sliding and canyon deposits on the other hand.     

Continental slope sedimentation adjacent to an ice margin I. Seismic facies of Labrador Slope

Sleeve-gun, 3.5-kHz, and 12-kHz profiles from the Labrador Slope provide the basis for an analysis of sedimentary facies, processes, and evolution of a continental slope adjacent to an ice margin. The upper slope is deeply incised by numerous canyons reflecting headward canyon branching. The less rugged middle-slope topography has fewer canyons and large slide and slump scars followed downslope by debris-flow deposits. Echo character of seismic profiles reflects the difference in sediment types supplied from mud-dominated sources and sand-, gravel- and till-dominated sources. On the rise, debris-flow deposits are largely confined to canyons. Intercanyon areas are dominated by spill-over turbidites alternating with hemipelagic sediments, which on some of the southern to southwestern levees occur in sediment-wave fields formerly attributed to bottom-current activity.     

Morphology, distribution and origin of recent submarine landslides of the Ligurian Margin (North-western Mediterranean): some insights into geohazard assessment

Based on new multibeam bathymetric data, seismic-reflection profiles and side-scan sonar images, a great number of submarine failures of various types and sizes was identified along the northern margin of the Ligurian Basin and characterized with 3 distinct end-members concerning their location on the margin, sedimentary processes and possible triggering mechanisms. They include superficial landslides mainly located in the vicinity of the main mountain-supplied rivers and on the inner walls of canyons (typically smaller that 10⁸ m³ in volume: Type 1), deep scars 100?C500 m high along the base of the continental slope (Type 2), and large-scale scars and Mass Transport Deposits (MTDs) affecting the upper part of the slope (Type 3 failures). The MTDs are located in different environmental contexts of the margin, including the deep Var Sedimentary Ridge (VSR) and the upper part of the continental slope in the Gulf of Genova (Finale Slide and Portofino Slide), with volumes of missing sediment reaching up to 1.5 × 10⁹ m³. High sedimentation rates related to hyperpycnal flows, faults and earthquake activity, together with sea-level fluctuations are the main factors invoked to explain the distribution and sizes of these different failure types.     

南海北部白云深水区东北部小型峡谷内的块体搬运

The process of mass movements and their consequent turbidity currents in large submarine canyons has been widely reported, however, little attention was paid to that in small canyons. In this paper, we document mass movements in small submarine canyons in the northeast of Baiyun deepwater area, north of the South China Sea(SCS), and their strong effects on the evolution of the canyons based on geophysical data. Submarine canyons in the study area arrange closely below the shelf break zone which was at the depth of –500 m. Within submarine canyons, seabed surface was covered with amounts of failure scars resulted from past small-sized landslides. A complex process of mass transportation in the canyons is indicated by three directions of mass movements.Recent mass movement deposits in the canyons exhibit translucent reflections or parallel reflections which represent the brittle deformation and the plastic deformation, respectively. The area of most landslides in the canyons is less than 3 km2. The trigger mechanisms for mass movements in the study area are gravitational overloading, slope angle and weak properties of soil. Geophysical data indicate that the genesis of submarine canyons is the erosion of mass movements and consequent turbidity currents. The significant effects of mass movements on canyon are incision and sediment transportation at the erosion phases and fillings supply at the fill phases. This research will be helpful for the geological risk assessments and understanding the sediment transportation in the northern margin of the SCS.     

Morphology and architecture of the typical erosion-genesis submarine canyons on the East China Sea slope

The Yithi submarine canyons,composed of four canyons less than 60 km in length,are located on the narrowest part of the East China Sea(ECS) slope.They extend from the shelf break at 160 m down to water depth of 1 500 m with an average gradient(along the canyon axis) of 3°(<1 000 m) and 0.7°(>1000 m).The sinuosity of the canyons ranges form 1.02 to 1.14 and their pathways extend radially from the shelf break to the axis of the Okinawa Trough.Structural and evolution pattern of the Yithi canyons are mainly controlled by sediment mass-movements and turbidity current and similar with that of the canyons in Ebro continental slope.The whole canyon system consists of three parts:the canyon,the channel and the fan.Slumps and slides often develop in the upper part of canyon where the water depth is less than 1000 m,and the turbidities usually developed on the fan.The scale of turbidites becomes smaller and their inner structures become more regular towards the ends of the canyons.Canyon-fans are often associated with small angle progradational reflection.Most canyon-fans and levees were transversely cut by active normal faults with NEE-SWW trending that are coupled to the modern extension of the Okinawa Trough.According to the age of formation of canyon-fans and sediments incised by canyons,we can infer that the Yithi canyons were formed since the middle the Medio-Pleistocene.     

Morphotectonics and evolutionary controls on the Pearl River Canyon system, South China Sea

The Pearl River Canyon system is a typical canyon system on the northern continental slope of the South China Sea, which has significant implications for hydrocarbon exploration. Through swath bathymetry in the canyon area combined with different types of seismic data, we have studied the morphotectonics and controlling factors of the canyon by analyzing its morphology and sedimentary structure, as well as the main features of the continental slope around the canyon. Results show that the Pearl River Canyon can be separated into three segments with different orientations. The upper reach is NW-oriented with a shallowly incised course, whereas the middle and lower reaches, that are located mainly in the Baiyun Sag, have a broad U-shape and have experienced consistent deposition. Seventeen deeply-cut canyons have developed in the slope north of the Baiyun Sag, playing an important role in the sedimentary processes of the middle and lower reaches of the Pearl River Canyon. These canyons display both asymmetrical V- and U-shapes along their lengths. Numerous buried channels can be identified below the modern canyons with unidirectionally migrating stacking patterns, suggesting that the canyons have experienced a cyclic evolution with several cut and fill phases of varying magnitude. These long established canyons, rather than the upper reach of the Pearl River Canyon, are the main conduits for the transport of terrigenous materials to the lower slope and abyssal basin during lowstand stage, and have contributed to the formation of vertically stacked deep-water fans in the middle reach. Canyon morphology is interpreted as a result of erosive sediment flows. The Pearl River Canyon and the 17 canyons in the slope area north of the Baiyun Sag probably have developed since the Miocene. Cenozoic tectonics, sea level change and sediment supply jointly control the morphology and sedimentary structure. The middle and lower reaches of the Pearl River Canyon developed on the paleo-terrain of the Baiyun Sag, which has been a persistently rapid depositional environment, receiving most of the materials transported via the canyons.     

Pockmarks and seafloor instability in the Olbia continental slope (northeastern Sardinian margin, Tyrrhenian Sea)

The seafloor morphology and the subsurface of the continental slope of the Olbia intraslope basin located along the eastern, passive Sardinian margin (Tyrrhenian Sea) has been mapped through the interpretation of high-resolution multibeam bathymetric data, coupled with air-gun and sparker seismic profiles. Two areas, corresponding to different physiographic domains, have been recognized along the Olbia continental slope. The upper slope domain, extending from 500 to 850 m water depth, exhibits a series of conical depressions, interpreted as pockmarks that are particularly frequent in seafloor sectors coincident with buried slope channels. In one case, they are aligned along a linear gully most likely reflecting the course of one of the abandoned channels. The location of the pockmarks thus highlights the importance of the distribution of lithologies within different sedimentary bodies in the subsurface in controlling fluid migration plumbing systems. A linear train of pockmarks is, however, present also away from the buried channels being related to a basement step, linked to a blind fault. Two bathymetric highs, interpreted as possible carbonate mounds, are found in connection with some of the pockmark fields. Although the genetic linkage of the carbonate mounds with seafloor fluid venting cannot be definitively substantiated by the lack of in situ measurements, the possibility of a close relationship is here proposed. The lower slope domain, from 850 m down to the base of the slope at 1,200 m water depth is characterized by a sudden gradient increase (from 2° to 6°) that is driven by the presence of the basin master fault that separates the continental slope from the basin plain. Here, a series of km-wide headwall scars due to mass wasting processes are evident. The landslides are characterized by rotated, relatively undeformed seismic strata, which sometimes evolve upslope into shallow-seated (less than 10 m), smaller scale failures and into headless chutes. Slope gradient may act as a major controlling factor on the seafloor instability along the Olbia continental slope; however, the association of landslides with pockmarks has been recognized in several continental slopes worldwide, thus the role of over-pressured fluids in triggering sediment failure in the Olbia slope can not be discarded. In the absence of direct ground truthing, the geological processes linked to subsurface structures and their seafloor expressions have been inferred through the comparison with similar settings where the interpretation of seafloor features from multibeam data has been substantiated with seafloor sampling and geochemical data.     

Fluid escape structures in the north Sicily continental margin

High resolution and multichannel seismic profiles coupled with multibeam echosounder (seafloor relief) data, acquired along the northern Sicily continental margin (southern Tyrrhenian Sea), document the occurrence of mound and pockmark features, revealing fluid escape processes. Along this margin, morphology of the high-gradient continental slope is irregular due to the presence of structural highs, slope failures and canyons, and is interrupted by flat areas at a mean depth of 1500 m.Seismostratigraphic analysis tools and methods were used to identify fluid escape structures and to work out a classification on the basis of their morpho-acoustic characteristics. The detailed 3D bathymetric chart was used to define the top view morphologic features and their areal distribution. With the aim to evaluate the geochemical content of fluids, we collected a 2.3 m long sediment core in correspondence of a pockmark at a depth of 414 m. Pore waters were sampled every 10 cm and analysed in relation to their conductivity (EC) and composition (δ¹⁸O, δD, Li, Na, K, Mg, F, Cl, Br, NO₃, SO₄).The new data show the occurrence of different types of structures with highly contrasting seismic and morphologic signatures, both dome-type and concave-upward structures. The latter have a characteristic circular shape and are known as pockmarks. Morphobathymetric, stratigraphic and structural data suggest that these structures occur along fault planes, mainly associated with diagenetic carbonates and fluid venting activity. Pockmarks could be the result of both fault and landslide structures, as they appear aligned along a straight direction and occur in proximity of the slope, and are associated with slope instabilities. The structural features are possibly associated with the recent tectonics mapped on-land as well as the widespread seismicity of the margin.Geochemical features reveal that pore water is slightly enriched in heavy isotopes with respect to Mediterranean seawater, while the distribution profiles of EC, ion concentration (Cl, SO₄, Na, K, Mg, Ca), ion/Chloride ratios (Na/Cl, K/Cl, Ca/Cl, Mg/Cl and Alk/Cl) seem to indicate the existence of an external source of fluids and the occurrence of sediment-fluids interaction processes. A possible mechanism causing pore water freshening could be the destabilisation of gas hydrates.     

Physiographic and bathymetric characteristics of the continental slope,northwest Gulf of Mexico

Bathymetric charts of the continental slope of the northwestern Gulf of Mexico reveal the presence of over 90 intraslope basins with relief in excess of 150 m. The evolution and the general configuration of the basins are a function of halokinesis of allochthonous salt. Intraslope-interlobal and intraslope-superlobal basins occupy the upper and lower continental slope, respectively. Other structures on the slope associated with salt tectonics are the Sigsbee Escarpment, the seaward edge of the Sigsbee salt nappe, and the Alaminos and Keathley canyons. Major erosional features are the Mississippi Canyon and portions of a submarine canyon on the southern extreme of the Sigsbee Escarpment.     

基于水文分析法的海底峡谷特征要素自动提取方法研究及应用

海底峡谷是陆源沉积物向深海运移的主要通道,也是陆架/陆坡区重要的地貌单元。随着多波束测深技术的发展,如何快速而准确地从海量数据中识别并提取海底峡谷的特征要素,是一个亟待解决的重要热点问题。文中根据海底峡谷谷底下切、谷壁高而陡等地形特征,基于水文分析法和坡度分析等原理,通过ArcGIS中的数据建模工具建立了一种从数字高程模型(DEM)数据快速识别和提取海底峡谷特征要素的方法。以南海北部陆坡神狐峡谷区为例进行算例分析,结果表明,该方法在快速了解海底峡谷的发育位置和特征要素等方面是可行的,并可以获得峡谷头尾部水深、轴线长度、峡谷范围等特征信息。为获得该方法适用于研究区的最优参数组,文中讨论分析了峡谷形态、重分类阈值及数据分辨率等影响峡谷识别的因素。结果分析表明,峡谷形态会在一定程度上影响识别结果的准确性,但不影响对峡谷的总体了解;零值汇流累积量重分类阈值和DEM数据的空间分辨率是影响峡谷识别结果准确度的两个重要因素,在神狐峡谷群区,空间分辨率200 m且重分类阈值0.4时,海底峡谷识别和特征要素提取效果最佳。     

Cold seeps of the deep Gulf of Mexico: Community structure and biogeographic comparisons to Atlantic equatorial belt seep communities

Quantitative collections of tubeworm- and mussel-associated communities were obtained from 3 cold seep sites in the deep Gulf of Mexico: in Atwater Valley at 1890 m depth, in Alaminos Canyon at 2200 m depth, and from the Florida Escarpment at 3300 m depth. A total of 50 taxa of macro- and megafauna were collected including 2 species of siboglinid tubeworms and 3 species of bathymodiolin mussels. In general, the highest degree of similarity was between communities collected from the same site. Most of the dominant families at the well-characterized upper Louisiana slope seep sites of the Gulf of Mexico were present at the deep sites as well; however, there was little overlap at the species level between the upper and lower slope communities. One major difference in community structure between the upper and lower slope seeps was the dominance of the ophiuroid Ophioctenella acies in the deeper communities. The transition between upper and lower slope communities appears to occur between 1300 and 1700 m based on the number of shared species with the Barbados seeps at either end of this depth range. Seep communities of the deep Gulf of Mexico were more similar to the Barbados Accretionary Prism seep communities than they were to either the upper slope Gulf of Mexico or Blake Ridge communities based on numbers of shared species and Bray–Curtis similarity values among sites. The presence of shared species among these sites suggests that there is ongoing or recent exchange among these areas. An analysis of bathymodioline mussel phylogeography that includes new collections from the west coast of Africa is presented. This analysis also suggests recent exchange across the Atlantic equatorial belt from the Gulf of Mexico to the seeps of the West Nigerian margin.     

Carbonate slope morphology revealing sediment transfer from bank-to-slope (Little Bahama Bank,Bahamas)

New high-quality multibeam and high-resolution seismic data reveal new observations on sediment transfer and distribution and margin morphometrics in the uppermost slope of Northeastern Little Bahama Bank between 20 and 300 m water depth. The echofacies/backscatter facies show an alongslope sediment distribution forming successive strips. The upper part of the uppermost slope corresponds to the alternation of several submerged coral terraces and escarpments that could be related to Late Quaternary sea-level variations. The terraces could either be related to periods of stagnating sea-level or slow-down in sea-level change and therefore increased erosion by waves, or periods of accelerated sea-level rise since the Last Glacial Maximum. Terraces could therefore be related to coral construction and drowing. The medium part corresponds to the marginal escarpment, a steep cemented area. The lower part of the uppermost slope shows a discontinuous Holocene sediment wedge with varying thickness between 0 and 35 m. It is separated from the upper part by a zone of well-cemented seafloor associated with the marginal escarpment. Passing cold fronts result in sediment export caused by density cascading. The associated sediment fall-out and convective sedimentation can generate density currents that form this wedge and eventually flow through linear structures on the upper slope. The survey reveals the presence of recently active channels that extend over the entire uppermost slope and interrupt the wedge. The channels connect shallow tidal channels to submarine valleys connected to the proximal part of canyons. They directly feed the canyons with platform-derived sediment forming low-density turbidity currents and could supply the deepest part of the system with coarse-grained sediment directly exported from the carbonate platform.     

Regional geomorphology of the continental slope of NW India: Delineation of the signatures of deep‐seated structures

Geomorphological features (derived from 16,000 lkm of echo‐sounding and bathymetric data) and deep‐seated tectonic structures of the continental margin off NW India are presented. The shelf break over the entire region occurs between 80 to 154 m water depth, and adjacent to Saurashtra and Bombay High the depth and orientation of the shelf edge show marked variations. The boundary of the slope is shallower in the northern portion (about 1450 m in the vicinity of the Indus) than in the southern region (2900 m off Bombay).

The steep slope off the Gulf of Kachchh has relatively smooth physiography due to higher input of fluvial sediment and burial of structures. The gentler slope off Saurashtra and the Bombay High area has numerous complex features, the most prominent among them being benches at depths of 180–230 m (width 2–10 km) and 650–780 m and a series of bathymetric highs and lows. Slope breaks are also observed between 400 and 600 m off Bombay and between 560 and 960 m off Saurashtra. These features are surface manifestations of the anticlinal features extending along the shelf in this region. Unevenness (order of 100–300 m) due to slumping is also observed at the base of the slope.

Based on the correlation between tectonic structures of this area and these subphysiographic features, extension of the Saurashtra Anticline onto the slope, a new strike slip fault (the southern boundary fault of Narmada graben) and an along‐shelf anticlinal structure off Saurashtra are delineated.     

Geomorphological evidence for upslope canyon-forming processes on the northern KwaZulu-Natal shelf,SW Indian Ocean,South Africa

A geomorphological and statistical analysis of slope canyons from the northern KwaZulu-Natal continental margin is documented and compared with submarine canyons from the Atlantic margin of the USA. The northern KwaZulu-Natal margin is characterized by increasing upslope relief, concave slope-gradient profiles and features related to upslope growth of the canyon forms. Discounting slope-gradient profile, this morphology is strikingly similar to canyon systems of the New Jersey slope. Several phases of canyon incision indicate that downslope erosion is also an important factor in the evolution of the northern KwaZulu-Natal canyon systems. Despite the strong similarities between the northern KwaZulu-Natal and New Jersey slope-canyon systems, key differences are evident: (1) the concavity of the northern KwaZulu-Natal slope, contrasting with the ∼linear New Jersey slope; (2) the relative isolation of the northern KwaZulu-Natal canyons, rather than the dense clustering of the New Jersey canyons; and (3) the absence of strongly shelf-breaching canyons along the northern KwaZulu-Natal margin. In comparison with the New Jersey margin, we surmise a more youthful stage of canyon evolution, a result of either the canyons themselves being younger or the formative processes being less active. Less complicated patterns of erosion resulting from reduced sediment availability have developed in northern KwaZulu-Natal. The reduction in slope concavity on the New Jersey margin may be the result of grading of the upper slope by intensive headward erosion, a process more subdued—or less evident—on the KwaZulu-Natal margin.     

Modes of development of slope canyons and their relation to channel and levee features on the Ebro sediment apron, off-shore northeastern Spain

Six submarine slope canyons in an area of the northwestern Mediterranean, offshore from the Ebro River and Delta, were surveyed with bathymetric swathmapping (SeaBeam) and mid-range side-looking sonar (SeaMARC I). All of the canyons have slightly winding paths with concave-upwards gradients that are relatively steep shallower than 1,200 m. Two major types of canyons are identified on the basis of their morphologic character at the base of the slope; Type-I canyons lead to an unchannelled base-of-slope deposit and Type-II canyons are continuous with channel-levee systems that cross the rise.Four Type-I canyons were surveyed in the area. Two of these are broad, U-shaped, steep (average gradients of 1:14), do not indent the shelf, and terminate downslope at debris-flow deposits. These two canyons, the most northern in the area, have rounded heads with extensive gullies separated by knife-edge ridges. Relief of the canyon walls is about equal on both sides of the canyons, although the right-hand walls (looking downslope) are generally steeper. The other two Type-I canyons in the area are similar in that they do not indent the shelf, but they are much smaller and shallower and coalesce before terminating in the base-of-slope region. The two Type-II canyons that feed leveed-channels are U-shaped with flatter floors, longer profiles and gentler gradients than Type-I canyons. They are closer to the Valencia Valley and have relatively small cross-sectional areas.We propose a four-stage evolutionary sequence to explain the development of the canyons observed in this section on the prograding Ebro margin. During the initial stage, slumping and erosion on the slope creates a network of small gullies. During the next stage, headward growth of one (or more) gully leads to a major indentation of the shelf. This is the critical factor for developing a channel that will incise the slope and provide a major conduit for moving sediment to the basin. Stage 3 is characterized by the development of a continuous channel accompanied by levee growth across the lobe. In the final stage, the channel-levee system becomes inactive either through destruction by mass wasting, infilling of the channel, or loss of the major sediment source.     

Imaging the recent sediment dynamics of the Galicia Bank region (Atlantic,NW Iberian Peninsula)

Multibeam bathymetry, high resolution multi-channel, and very high resolution single-channel (3.5 kHz) seismic records were used to depict the complex geomorphology that defines the Galicia Bank region (Atlantic, NW Iberian Peninsula). This region (≈620–5,000 m water depth) is characterized by a great variety of features: structural features (scarps, highs, valleys, fold bulges), fluid dynamics-related features (structural undulations and collapse craters), mass-movement features (gullies, channels, mass-flow deposits, slope-lobe complexes, and mass-transport deposits), bottom-current features (moats, furrows, abraded surface, sediment waves, and drifts), (hemi)pelagic features, mixed features (abraded surfaces associated to mixed sediments) and bioconstructions. These features represent architectural elements of four sedimentary systems: slope apron, contouritic, current-controlled (hemi)pelagic, and (hemi)pelagic. These systems are a reflection of different sedimentary processes: downslope (mass transport, mass flows, turbidity flows), alongslope (bottom currents of Mediterranean Outflow Water, Labrador Sea Water, North Atlantic Deep Water, and Lower Deep Water), vertical settling, and the interplay between them. The architectural and sediment dynamic complexities, for their part, are conditioned by the morphostructural complexity of the region, whose structures (exposed scarps and highs) favor multiple submarine sediment sources, affect the type and evolution of the mass-movement processes, and interact with different water masses. This region and similar sedimentary environments far from the continental sediment sources, as seamounts, are ideal zones for carrying out submarine source-to-sink studies, and can represent areas subject to hazards, both geologic and oceanographic in origin.     

Mass wasting along the Labrador shelf margin: Submersible observations

A dissected valley system along the central portion of the Labrador upper slope has been investigated using geophysical and submersible observations. The complex slope is a result of mass wasting on a steep slope gradient which appears to be independent of processes on the bank top. Small scale slumping and creep, a result of biological activity and iceberg rafting, and large-scale debris flows occur presently below 750 m water depth. A recent debris flow in the valley was examined in detail. Degraded iceberg scour marks are the principal sea bed feature above 750 m water depth.     

Controls on the development of valleys,canyons, and unconfined channel–levee complexes on the Pleistocene Slope of East Kalimantan,Indonesia

Shallow 3D seismic data show contrasting depositional patterns in Pleistocene deepwater slopes of offshore East Kalimantan, Indonesia. The northern East Kalimantan slope is dominated by valleys and canyons, while the central slope is dominated by unconfined channel–levee complexes. The Mahakam delta is immediately landward of the central slope and provided large amounts of sediments to the central slope during Pleistocene lowstands of sea level. In the central area, the upper slope contains relatively straight and deep channels. Sinuous channel–levee complexes occur on the middle and lower slope, where channels migrated laterally, then aggraded and avulsed. Younger channel–levee complexes avoided bathymetric highs created by previous channel–levee complexes. Levees decrease in thickness down slope. Relief between channels and levees also decreases down slope.North of the Mahakam delta, siliciclastic sediment supply was limited during the Pleistocene, and the slope is dominated by valleys and canyons. Late Pleistocene rivers and deltas were generally not present on the northern outer shelf. Only one lowstand delta was present on the northern shelf margin during the upper Pleistocene, and sediments from that lowstand delta filled a pre-existing slope valley complex and formed a basin-floor fan. Except for that basin-floor fan, the northern basin floor shows no evidence of sand-rich channels or fans, but contains broad areas with chaotic reflectors interpreted as mass transport complexes. This suggests that slope valleys and canyons formed by slope failures, not by erosion associated with turbidite sands from rivers or deltas. In summary, amount of sediment coming onto the slope determines slope morphology. Large, relatively steady input of sediment from the Pleistocene paleo-Mahakam delta apparently prevented large valleys and canyons from developing on the central slope. In contrast, deep valleys and canyons developed on the northern slope that was relatively “starved” for siliciclastic sediment.