Intensity measures for probabilistic assessment of non‐structural components acceleration demand

A fundamental issue in the framework of seismic probabilistic risk analysis is the choice of ground motion intensity measures (IMs). Based on the floor response spectrum method, the present contribution focuses on the ability of IMs to predict non‐structural components (NSCs) horizontal acceleration demand. A large panel of IMs is examined and a new IM, namely equipment relative average spectral acceleration (E‐ASA_R), is proposed for the purpose of NSCs acceleration demand prediction. The IMs efficiency and sufficiency comparisons are based on (i) the use of a large dataset of recorded earthquake ground motions; (ii) numerical analyses performed on three‐dimensional numerical models, representing actual structural wall and frame buildings; and (iii) systematic statistical analysis of the results. From the comparative study, the herein introduced E‐ASA_R shows high efficiency with respect to the estimation of maximum floor response spectra ordinates. Such efficiency is particularly remarkable in the case of structural wall buildings. Besides, the sufficiency and the simple formulation allowing the use of existing ground motion prediction models make the E‐ASA_R a promising IMs for seismic probabilistic risk assessment. Copyright © 2015 John Wiley & Sons, Ltd.     

Dynamic behaviour of R/C highway bridges under the combined effect of vertical and horizontal earthquake motions

Measurements of ground motions during past earthquakes indicate that the vertical acceleration can reach values comparable to horizontal accelerations or may even exceed these accelerations. Furthermore, measurements of structural response show the possibility of significant amplification in the response of bridges in the vertical direction that can be attributed to the vertical component of ground motion. In this study, the relative importance of the vertical component of ground motion on the inelastic response of R/C highway bridges is investigated. Particular emphasis is placed on modelling of the deck and piers to account for complex loading histories under combined vertical and horizontal earthquake motions. Analyses of actual bridges indicate that, in general, the vertical motion will increase the level of response and the amount of damage sustained by a highway bridge. Vertical motion generates fluctuating axial forces in the columns, which cause unstability of the hysteresis loops and increase the ductility demand. Furthermore, vertical motion can generate forces of high magnitude in the abutments and foundations that are not accounted for by the current seismic design guidelines. Thus, it is important to consider this component of the ground motion in the design of highway bridges, especially for those located in regions near seismic faults.     

Selection of optimal intensity measures in probabilistic seismic demand models of highway bridge portfolios

Probabilistic seismic demand models are a common and often essential step in generating analytical fragility curves for highway bridges. With these probabilistic models being traditionally conditioned on a single seismic intensity measure (IM), the degree of uncertainty in the models is dependent on the IM used. Selection of an optimal IM for conditioning these demand models is not a trivial matter and has been the focus of numerous studies. Unlike previous studies that consider a single structure for IM selection, this study evaluates optimal IMs for use when generating probabilistic seismic demand models for bridge portfolios such as would be found in HAZUS‐MH. Selection criteria such as efficiency, practicality, sufficiency, and hazard computability are considered in the selection process. A case study is performed considering the multi‐span simply supported steel girder bridge class. Probabilistic seismic demand models are generated considering variability in the geometric configurations and material properties, using two suites of ground motions—one synthetic and one recorded motion suite. Results show that of the 10 IMs considered, peak ground acceleration (PGA) and spectral acceleration at the fundamental period are the most optimal for the synthetic motions, and that cumulative absolute velocity is also a close contender when using recorded motions. However, when hazard computability is considered, PGA is selected as the IM of choice. Previous studies have shown that spectrally based quantities perform better than PGA for a given structure, but the findings of this study indicate that when a portfolio of bridges is considered, PGA should be used. Copyright © 2007 John Wiley & Sons, Ltd.     

Prediction of spatially distributed seismic demands in specific structures: Ground motion and structural response

The efficacy of various ground motion intensity measures (IMs) in the prediction of spatially distributed seismic demands (engineering demand parameters, (EDPs)) within a structure is investigated. This has direct implications to building‐specific seismic loss estimation, where the seismic demand on different components is dependent on the location of the component in the structure. Several common IMs are investigated in terms of their ability to predict the spatially distributed demands in a 10‐storey office building, which is measured in terms of maximum interstorey drift ratios and maximum floor accelerations. It is found that the ability of an IM to efficiently predict a specific EDP depends on the similarity between the frequency range of the ground motion that controls the IM and that of the EDP. An IMs predictability has a direct effect on the median response demands for ground motions scaled to a specified probability of exceedance from a ground motion hazard curve. All of the IMs investigated were found to be insufficient with respect to at least one of magnitude, source‐to‐site distance, or epsilon when predicting all peak interstorey drifts and peak floor accelerations in a 10‐storey reinforced concrete frame structure. Careful ground motion selection and/or seismic demand modification is therefore required to predict such a spatially distributed demands without significant bias. Copyright © 2009 John Wiley & Sons, Ltd.     

地面运动强度参数对RC桥梁地震需求的影响

在基于性能的地震工程学(PBEE)中,建立概率地震需求模型(PSDM)时需要对桥梁结构的工程需求参数(EDP)进行概率估计。其中,强地面运动参数(IM)的选择对EDP的概率估计影响很大,因此需要正确选择IM。分别采用目前最广泛使用的结构第一模态周期弹性谱加速度(5%阻尼比)Sa(T1,5%)和峰值地面加速度PGA作为IM,选择实际地震波并进行合理的调值,对一座钢筋混凝土桥墩进行IDA分析,其计算结果表明:对于不同性质EDP的概率估计值,以PGA作为IM计算所得的结果明显偏于非保守,且离散度一般也更大。说明可以针对不同性质的EDP,根据地面运动强度的大小,选择不同的IM,通过合理的调值对EDP进行概率估计,可以更加精确、高效地建立PSDM。     

断层走向对刚构桥地震反应的影响

我国西部部分连续刚构桥临近地震断层建设,在抗震分析时通常会忽略断层走向与桥梁纵桥向夹角对其地震反应的影响。利用Midas Civil软件建立4座墩高不同的大跨度连续刚构桥模型,选取10组近断层强震记录进行时程分析,研究断层走向对刚构桥地震反应(位移和弯矩反应)的影响。结果显示：在水平双向近断层地震动输入下,桥梁主墩及主梁纵桥向地震反应在断层走向与纵桥向夹角为75°～135°范围内最大,而横桥向最大地震反应则发生在夹角为0°～30°或120°～180°范围;在三向近断层地震动输入下,与仅考虑水平双向地震动输入下的桥梁地震反应相比,竖向地震动对主梁竖向弯矩响应的影响较大,特别是主墩和主梁的交界处,增大比例可达2倍及以上。就文章选取的4座桥梁算例,不考虑断层走向和桥梁纵桥向的夹角则存在低估桥梁地震反应的可能,低估误差在15%～40%左右。     

Rocking amplification and strong‐motion duration

This paper characterizes the ability of natural ground motions to induce rocking demands on rigid structures. In particular, focusing on rocking blocks of different size and slenderness subjected to a large number of historic earthquake records, the study unveils the predominant importance of the strong‐motion duration to rocking amplification (ie, peak rocking response without overturning). It proposes original dimensionless intensity measures (IMs), which capture the total duration (or total impulse accordingly) of the time intervals during which the ground motion is capable of triggering rocking motion. The results show that the proposed duration‐based IMs outperform all other examined (intensity, frequency, duration, and/or energy‐based) scalar IMs in terms of both “efficiency” and “sufficiency.” Further, the pertinent probabilistic seismic demand models offer a prediction of the peak rocking demand, which is adequately “universal” and of satisfactory accuracy. Lastly, the analysis shows that an IM that “efficiently” captures rocking amplification is not necessarily an “efficient” IM for predicting rocking overturning, which is dominated by the velocity characteristics (eg, peak velocity) of the ground motion.     

A comparative study between China and U.S. on seismic design philosophy and practice of a long span arch bridge

This paper presents the first of a series of case studies on the seismic design of long span bridges （cable-stayed bridges, suspension bridges and arch bridges） under a cooperative research project on seismic behavior and design of highway bridges between the State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University and the Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo. The objective of this series of case studies is to examine the differences and similarities on the seismic design practice of long span bridges in China and the U.S., to identify research needs and to develop design guidelines beneficial to bridge engineers in both countries. Unlike short to medium span bridges, long span bridges are not included in most seismic design specifications, mainly because they are location dependent and structurally unique. In this paper, an available model of a steel tied half through arch bridge with a main span of 550m in China is discussed. Analysis is focused on comparisons of the seismic responses due to different ground motions. Seismic design criteria and seismic performance requirements for long span bridges in both countries were first introduced and compared, and then three near field earthquake records with large vertical components were selected as the excitations to examine the seismic behavior and seismic vulnerability of the bridge. Results show that （1） the selected near field ground motions cause larger responses to key components （critical sections） of the bridge （such as arch rib ends） with a maximum increase of more than twice those caused by the site specific ground motions; （2） piers, longitudinal girders and arch crowns are more vulnerable to vertical motions, especially their axial forces; and （3） large vertical components of near field ground motions may not significantly affect the bridge＇s internal forces provided that their peak acceleration spectra ordinates only appear at periods of less than 0.2s. However, they may have more influence on the longitudinal displacements of sliding bearings due to their large displacement spectra ordinates at the fundamental period of the bridge.     

不规则公路桥梁地震动参数快速评估技术研究

快速评估不规则公路桥梁的地震动参数为桥梁地震响应分析、桥梁安全性设计提供科学依据。研究一种快速、有效的不规则公路桥梁地震动参数评估技术,以C形不规则公路桥梁为原型设计振动台与公路桥梁模型,选取Imperial Valley波作为地震动输入,采用加速度传感器、位移传感器采集桥梁加速度与位移数据;结合已知地震动数据计算地震动持续时长参数,优化衰减模型获取精确的地表峰值加速度参数。分析地表峰值加速度与其他地震动参数关系可知,地表峰值加速度与损坏概率成正比,桥梁结构发生损坏的概率在50%以下;震级越大、震中距越小、地表峰值加速度越大。     

强震下斜交桥地震反应与减隔震性能分析

针对斜交桥在破坏性地震中发生破坏和损伤的突出问题,采用铅芯橡胶支座(LRB)进行隔震和滞回耗能。基于OpenSees平台建立了不同斜度的传统非隔震和全桥采用LRB隔震的4跨斜交连续梁桥动力分析模型,沿2个水平方向输入远场地震动和具有向前方向性效应、滑冲效应以及无速度脉冲效应的近断层地震动,并进行非线性时程计算,研究桥墩和挡块的损伤状态、主梁旋转度、碰撞力与斜交桥斜度的关系以及LRB对斜交桥抗震性能的影响。结果表明:向前方向性效应和滑冲效应的脉冲型地震动作用下的斜交桥地震反应和损伤明显大于无速度脉冲近断层和远场地震动作用; 采用LRB隔震后,明显降低了固定墩的地震损伤,桥墩位移减震率可达到50%以上; LRB隔震桥主梁与挡块的间隙宜结合桥梁的地震风险和设计位移进行确定。     

Modification of stochastic ground motion models for matching target intensity measures

Stochastic ground motion models produce synthetic time‐histories by modulating a white noise sequence through functions that address spectral and temporal properties of the excitation. The resultant ground motions can be then used in simulation‐based seismic risk assessment applications. This is established by relating the parameters of the aforementioned functions to earthquake and site characteristics through predictive relationships. An important concern related to the use of these models is the fact that through current approaches in selecting these predictive relationships, compatibility to the seismic hazard is not guaranteed. This work offers a computationally efficient framework for the modification of stochastic ground motion models to match target intensity measures (IMs) for a specific site and structure of interest. This is set as an optimization problem with a dual objective. The first objective minimizes the discrepancy between the target IMs and the predictions established through the stochastic ground motion model for a chosen earthquake scenario. The second objective constraints the deviation from the model characteristics suggested by existing predictive relationships, guaranteeing that the resultant ground motions not only match the target IMs but are also compatible with regional trends. A framework leveraging kriging surrogate modeling is formulated for performing the resultant multi‐objective optimization, and different computational aspects related to this optimization are discussed in detail. The illustrative implementation shows that the proposed framework can provide ground motions with high compatibility to target IMs with small only deviation from existing predictive relationships and discusses approaches for selecting a final compromise between these two competing objectives.     

Effects of seismic isolation on the seismic response of a California high‐speed rail prototype bridge with soil‐structure and track‐structure interactions

With the launch of the high‐speed train project in California, the seismic risk is a crucial concern to the stakeholders. To investigate the seismic behavior of future California High‐Speed Rail (CHSR) bridge structures, a 3D nonlinear finite‐element model of a CHSR prototype bridge is developed. Soil‐structure and track‐structure interactions are accounted for in this comprehensive numerical model used to simulate the seismic response of the bridge and track system. This paper focuses on examining potential benefits and possible drawbacks of the a priori promising application of seismic isolation in CHSR bridges. Nonlinear time history analyses are performed for this prototype bridge subjected to two bidirectional horizontal historical earthquake ground motions each scaled to two different seismic hazard levels. The effect of seismic isolation on the seismic performance of the bridge is investigated through a detailed comparison of the seismic response of the bridge with and without seismic isolation. It is found that seismic isolation significantly reduces the deck acceleration and the force demand in the bridge substructure (i.e., piers and foundations), especially for high‐intensity earthquakes. However, seismic isolation increases the deck displacement (relative to the pile cap) and the stresses in the rails. These findings imply that seismic isolation can be promisingly applied to CHSR bridges with due consideration of balancing its beneficial and detrimental effects through using appropriate isolators design. The optimum seismic isolator properties can be sought by solving a performance‐based optimum seismic design problem using the nonlinear finite‐element model presented herein. Copyright © 2016 John Wiley & Sons, Ltd.     

Collapse assessment of moment frame buildings,considering vertical ground shaking

While many cases of structural damage in past earthquakes have been attributed to strong vertical ground shaking, our understanding of vertical seismic load effects and their influence on collapse mechanisms of buildings is limited. This study quantifies ground motion parameters that are capable of predicting trends in building collapse because of vertical shaking, identifies the types of buildings that are most likely affected by strong vertical ground motions, and investigates the relationship between element level responses and structural collapse under multi‐directional shaking. To do so, two sets of incremental dynamic analyses (IDA) are run on five nonlinear building models of varying height, geometry, and design era. The first IDA is run using the horizontal component alone; the second IDA applies the vertical and horizontal motions simultaneously. When ground motion parameters are considered independently, acceleration‐based measures of the vertical shaking best predict trends in building collapse associated with vertical shaking. When multiple parameters are considered, Housner intensity (SI), computed as a ratio between vertical and horizontal components of a record (SI_V/SI_H), predicts the significance of vertical shaking for collapse. The building with extensive structural cantilevered members is the most influenced by vertical ground shaking, but all frame structures (with either flexural and shear critical columns) are impacted. In addition, the load effect from vertical ground motions is found to be significantly larger than the nominal value used in US building design. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of near-fault earthquake on bridges: lessons learned from Chi-Chi earthquake

The objective of this paper is to describe the lessons learned and actions that have been taken related to the seismic design of bridge structures after the Chi-Chi, Taiwan earthquake. Much variable near-fault ground motion data was collected from the rupture of Chelungpu fault during the Chi-Chi earthquake, allowing the seismic response of bridge structures subjected to these near-fault ground motions to be carefully examined. To study the near-fault ground motion effect on bridge seismic design codes, a two-level seismic design of bridge structures was developed and implemented. This design code reflects the near-fault factors in the seismic design forces. Finally, a risk assessment methodology, based on bridge vulnerability, is also developed to assist in decisions for reducing seismic risk due to failure of bridges. Director of Center for Research on Earthquake Engineering. Supported by: the Science Council, Chinese Taipei, under grant no. SC 90-2211-E-002-028.     

长联大跨摩擦摆支座隔震连续梁桥多维地震反应分析

结合长联大跨连续梁桥的特点,以1座(65+123+156+123+10×90+55)m长联大跨摩擦摆支座隔震连续梁桥为背景,建立了全桥三维有限元模型,运用非线性时程分析法,分析了地震动输入模式、地震动强度、摩擦摆支座参数对该桥内力、位移和能量响应的影响。研究结果表明:(1)长联大跨连续梁桥布置摩擦摆支座,可有效延滞固定墩顶有效主梁质量效应,实现全桥协同抗震。大部分地震能量可通过支座滞回耗能散耗,大幅降低了该桥固定墩地震能量耗散需求。(2)长联大跨连续梁桥减隔震设计中,建议采用水平单向+竖向地震组合进行内力设计,采用三向地震组合进行位移设计。(3)强震作用下,支座摩擦因数取0.029~0.034时该桥隔震性能最优。     

Seismic response of a cable‐stayed bridge deck under multi‐component non‐stationary random ground motion

A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic response of a bridge–soil–foundation system under the combined effect of vertical and horizontal ground motions

Different levels of model sophistication have recently emerged to support seismic risk assessment of bridges, but mostly at the expense of neglecting the influence of vertical ground motions (VGMs). In this paper, the influence of VGMs on bridge seismic response is presented and the results are compared with the case of horizontal‐only excitations. An advanced finite element model that accounts for VGMs is first developed. Then, to investigate the effect of soil–structure interaction (SSI) including liquefaction potential, the same bridge with soil‐foundation and fixed boundary conditions is also analyzed. Results show that the inclusion of the VGMs has a significant influence on the seismic response, especially for the axial force in columns, normal force of bearings, and the vertical deck bending moments. However, VGMs do not have as much influence on the seismic demand of the pile cap displacements or pile maximum axial forces. Also, the significant fluctuation of the column axial force can reduce its shear and flexural capacity, and a heightened reversal of flexural effects may induce damage in the deck. In addition, relative to the fixed base case, SSI effects tend to reduce response quantities for certain ground motions while increasing demands for others. This phenomenon is explained as a function of the frequency content of the ground motions, the shift in natural vertical periods, and the VGM spectral accelerations at higher modes. Moreover, the mechanisms of liquefaction are isolated relative to SSI effects in nonliquefiable soils, revealing the influence of liquefaction on bridge response under VGMs. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of isolator and ground motion characteristics on the performance of seismic‐isolated bridges

This paper presents the effect of isolator and substructure properties as well as the frequency characteristics and intensity of the ground motion on the performance of seismic‐isolated bridges (SIBs) and examines some critical design clauses in the AASHTO Guide Specification for Seismic Isolation Design. For this purpose, a parametric study, involving more than 800 non‐linear time history analyses of simplified structural models representative of typical SIBs, is conducted. The results from the parametric study are then used to derive important design recommendations and conclusions that may be used by bridge engineers to arrive to a more sound and economical design of SIBs. It is found that the SIB response is a function of the peak ground acceleration to peak ground velocity ratio of the ground motion. Thus, the choice of the seismic ground motion according to the characteristics of the bridge site is crucial for a correct design of the SIB. It is also found that the characteristic strength of the isolator may be chosen based on the intensity and frequency characteristics of the ground motion. Furthermore, the isolator post‐elastic stiffness is found to have a notable effect on the response of SIBs. Copyright © 2005 John Wiley & Sons, Ltd.     

An alternative construction of normalized seismic design spectra for near-fault regions

This paper presents a methodology for constructing seismic design spectra in near-fault regions.By analyzing the characteristics of near-fault pulse-type ground motions,an equivalent pulse model is proposed,which can well represent the characteristics of the near-fault forward-directivity and fling-step pulse-type ground motions.The normalized horizontal seismic design spectra for near-fault regions are presented using recorded near-fault pulse-type ground motions and equivalent pulse-type ground motions,which are derived based on the equivalent pulse model coupled with ground motion parameter attenuation relations.The normalized vertical seismic design spectra for near-fault regions are obtained by scaling the corresponding horizontal spectra with the vertical-to-horizontal acceleration spectral ratios of near-fault pulse-type ground motions.The proposed seismic design spectra appear to have relatively small dispersion in a statistical sense.The seismic design spectra for both horizontal and vertical directions can provide alternative spectral shapes for seismic design codes.     

Seismic isolation of cable‐stayed bridges for near‐field ground motions

This study examines the efficacy of using seismic isolation to favorably influence the seismic response of cable‐stayed bridges subjected to near‐field earthquake ground motions. In near‐field earthquake ground motions, large amplitude spectral accelerations can occur at long periods where many cable‐stayed bridges have significant structural response modes. This combination of factors can result in large tower accelerations and base shears. In this study, lead–rubber bearing seismic isolators were modeled for three cable‐stayed bridges, and three cases of isolation were examined for each bridge. The nine isolated bridge configurations, plus three non‐isolated configurations as references, were subjected to near‐field earthquake ground motions using three‐dimensional time‐history analyses. Introduction of a small amount of isolation is shown to be very beneficial in reducing seismic accelerations and forces while at the same time producing only a modest increase in the structural displacements. There is a low marginal benefit to continue to increase the amount of isolation by further lengthening the period of the structure because structural forces and accelerations reduce at a diminishing rate whereas structural displacements increase substantially. In virtually all cases the base shears in the isolated bridges were reduced by at least 50several instances by up to 80individual near‐field records showed large variability from one record to the next, with coefficients of variation about the mean as large as 50assessing the characteristics of near‐field ground motion for use in isolation design of cable‐stayed bridges. Copyright © 2003 John Wiley & Sons, Ltd.