Removal of hexavalent chromium from aqueous solution by barium ion cross-linked alginate beads

Barium ion cross-linked alginate beads have shown great affinity to toxic hexavalent chromium ions in aqueous solution, in contrast to the traditionally used calcium alginate beads. Our adsorption experiments were carried out by the batch contact method. The optimal pH for removal was found to be pH 4. The equilibrium was established in 4 h, and the removal efficiency of chromium(VI) was found to be 95 %. The adsorption data were applied to Langmuir, Freundlich, Dubinin–Redushkevich (D–R), and Temkin isotherm equations. Both Langmuir and Freundlich isotherm constants indicated a favorable adsorption. The value of mean sorption energy calculated from D–R isoterm indicates that the adsorption is essentially physical. The high maximum chromium(VI) adsorption capacity was determined from the Langmuir isotherm as 36.5 mg/g dry alginate beads. The chromium(VI) adsorption data were analyzed using several kinetic models such as the pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models, and the rate constants were quantified. Our study suggests that barium alginate beads can be used as cost-effective and efficient adsorbents for the removal of chromium(VI) from contaminated waters.     

Ionic solid-impregnated sulphate-crosslinked chitosan for effective adsorption of hexavalent chromium from effluents

Microwave-assisted tetrabutyl ammonium-impregnated sulphate-crosslinked chitosan was synthesized for enhanced adsorption of hexavalent chromium. The adsorbent obtained was extensively characterized using Fourier transform infrared, X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray studies. Various isotherm models such as Langmuir, Freundlich and Dubinin–Radushkevich were studied to comprehend the adsorption mechanism of hexavalent chromium by the adsorbent. Maximum adsorption capacity of 225.9 mg g^?1 was observed at pH 3.0 in accordance with Langmuir isotherm model. The sorption kinetics and thermodynamic studies revealed that adsorption of hexavalent chromium followed pseudo-second-order kinetics with exothermic and spontaneous behaviour. A column packed with 1 g of adsorbent was found to give complete adsorption of Cr(VI) up to 900 mL of 200 mg L^?1 solution which discerns the applicability of the adsorbent material for higher sample volumes in column studies. The effective adsorption results were obtained due to both ion exchange and ion pair interaction of adsorbent with hexavalent chromium. Greener aspect of overall adsorption was regeneration of the adsorbent which was carried out using sodium hydroxide solution. In the present study, the regenerated adsorbent was effectively reused up to ten adsorption–desorption cycles with no loss in adsorption efficiency.     

Optimization and design of a continuous biosorption process using brown algae and chitosan/PVA nano-fiber membrane for removal of nickel by a new biosorbent

In this study, nickel ions adsorption from zinc ingot factory wastewater by brown algae (Sargassum glaucescens) and chitosan/polyvinyl alcohol nano-fiber membrane at continuous system was studied. The continuous process included a biosorption reactor and fixed-bed reactor that were optimized by predicting two batch steps with response surface modeling, based on the Box–Behnken in the novel approach. Nano-biosorbent characterized by scanning electron microscopy, Brunauer–Emmett–Teller and Fourier transform infrared spectrometer analysis. Maximum biosorption in this continuous system was at pH 6, biosorbent doses 8 g L^?1 S. glaucescens and 0.48 g L^?1 nano-fiber. The study of the reaction rate showed kinetic data best fitted by pseudo-first-order model with R ² > 0.95 than pseudo-second-order and intraparticle diffusion models. Biosorption equilibrium data were performed using Langmuir isotherm and Freundlich isotherm, Langmuir isotherm fit better with equilibrium data.     

Adsorption of a cationic dye (methylene blue) by Iranian natural clays from aqueous solutions: equilibrium,kinetic and thermodynamic study

Removal of dyes by low-cost adsorbents is an effective method in wastewater treatment. Iranian natural clays were determined to be effective adsorbents for removal of a basic dye (methylene blue) from aqueous solutions in batch processes. Characterizations of the clays were carried out by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis and field-emission scanning electron microscopy. Effects of the operational parameters such as adsorbent dosage, initial dye concentration, solution pH and temperature were investigated on the adsorption performance. Adsorption isotherms like Langmuir, Freundlich and Temkin were used to analyze the adsorption equilibrium data and Langmuir isotherm was the best fit. Adsorption kinetics was investigated by pseudo-first-order, pseudo-second-order and intraparticle diffusion models and the results showed that the adsorption system conforms well to the pseudo-second-order model. The thermodynamic parameters of adsorption (ΔS°, ΔH° and ΔG°) were obtained and showed that the adsorption processes were exothermic.     

Equilibrium studies on removal of lead (II) ions from aqueous solution by adsorption using modified red mud

In the present experimental study, solid waste was used as an adsorbent and the effectiveness of the adsorbent was increased by novel treatment methods. Red mud, acid-treated activated red mud and iron oxide-coated acid-treated activated red mud were used for the removal of lead (II). The structural and functional groups were identified to confirm the removal of lead (II) by powder X-ray diffraction and Fourier transform infrared spectroscopy analyses. The enhancement of surface area was confirmed by Brunauer–Emmett–Teller analysis. Batch adsorption experiment was also conducted, and various parameters such as the effect of adsorbent dosage, pH, contact time and initial ion concentration were analyzed and reported. Adsorption equilibrium data were investigated using Langmuir, Freundlich and Dubinin–Radushkevich isotherm models with three parameters, and the rate of reaction was examined through kinetic models. The results indicate that in particular a novel modified form of red mud, namely iron oxide-coated acid-treated activated red mud was well fitted in lead (II) removal compared with reported adsorbents. The Langmuir isotherm shows that the maximum adsorption of adsorbate per gram was greater than other adsorbents (27.02 mg/g). In Freundlich isotherm, the Freundlich constant n values lie between 1 and 10 indicate the favorable adsorption. The calculated n values for normal red mud, acid-treated activated red mud and iron oxide-coated acid-treated activated red mud were found to be 1.9, 2.1 and 2.0 respectively. The correlation coefficient value was higher and the rate of reaction follows the pseudo-second-order kinetic model.     

Hexamine adsorption study on activated carbon from aqueous solutions for application in treatment of hexamine industrial wastewater

The adsorption of hexamine onto powdered activated carbon from aqueous solutions was studied in a fixed bed system. Langmuir, Freundlich, Redlich–Peterson and Toth isotherm models were used to fit the experimental data and isotherm parameters were determined. The results revealed that the adsorption isotherm models fitted the data in the order of Langmuir > Toth > Redlich–Peterson > Freundlich. Lagergren pseudo-first order kinetic model was found to correlate well with the experimental data. The effects of solution pH, temperature, initial hexamine concentration and added salts concentration on the adsorption capacity and the rate of adsorption were studied. The results indicate that the rate of adsorption increases and then decreases as temperature of the hexamine solution increases, however, the adsorption capacity decreases. The addition of low concentration of salt significantly increases the adsorption capacity of activated carbon. The results showed that the activated carbon has potential for the adsorption of hexamine from industrial hexamine wastewater.     

Preparation and characterization of biosorbents and copper sequestration from simulated wastewater

This paper reports the potential of chemically treated wood chips to remove copper (II) ions from aqueous solution a function of pH, adsorbent dose, initial copper (II) concentration and contact time by batch technique. The wood chips were treated with (a) boiling, (b) formaldehyde and (c) concentrated sulphuric acid and characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive analysis X-ray. pH 5.0 was optimum with 86.1, 88.5 and 93.9 % copper (II) removal by boiled, formaldehyde-treated and concentrated sulphuric acid-treated wood chips, respectively, for dilute solutions at 20 g L^?1 adsorbent dose. The experimental data were analysed using Freundlich, Langmuir, Dubinin–Radushkevich and Temkin isotherm models. It was found that Freundlich and Langmuir models fitted better the equilibrium adsorption data and the adsorption process followed pseudo-second-order reaction kinetics. The results showed that the copper (II) is considerably adsorbed on wood chips and it could be an economical option for the removal of copper from aqueous systems.     

Removal of ibuprofen from aqueous solution by functionalized strong nano-clay composite adsorbent: kinetic and equilibrium isotherm studies

The functionalized nano-clay composite adsorbent was prepared, and its properties were characterized using FT-IR, XRD and SEM techniques. The synthesized nano-clay composite was studied with regard to its capacity to remove ibuprofen under different adsorption conditions such as varying pH levels (5–9), initial ibuprofen concentrations (3, 5 and 10 mg L^?1), contact time, and the amount of adsorbent (0.125, 0.25, 0.5 and 1 g). In order to evaluate the nanocomposite adsorption capacity, the adsorption results were assessed using nine isotherm models. The results showed that the optimum adsorption pH was 6 and that an increase or decrease in the pH reduced the adsorption capacity. The adsorption process was fast and reached equilibrium after 120 min. The maximum efficacy of ibuprofen removal was approximately 95.2%, with 1 g of adsorbent, 10 mg L^?1 initial concentration of ibuprofen, 120 min contact time and pH = 6. The optimal adsorption isotherm models were the Freundlich, Fritz–Schlunder, Redlich–Peterson, Radke–Prausnitz, Sip, Toth and Khan models. In addition, four adsorption kinetic models were employed for adsorption system evaluation under a variety of experimental conditions. The kinetic data illustrated that the process is very fast, and the reaction followed the Elovich kinetic model. Therefore, this nano-clay composite can be used as an effective adsorbent for the removal of ibuprofen from aqueous solutions, such as water and wastewater.     

A zinc oxide-coated nanoporous carbon adsorbent for lead removal from water: Optimization, equilibrium modeling, and kinetics studies

A zinc oxide-coated nanoporous carbon sorbent was prepared by acid modification and ZnO functionalization of mesoporous carbon. The synthesized materials, such as mesoporous carbon, oxidized mesoporous carbon and zinc oxide-coated nanoporous carbon, were characterized by nitrogen adsorption–desorption analysis, Fourier transform infrared spectra, scanning electron microscopy, and transmission electron microscopy. ZnO on oxidized mesoporous carbon gradually increased with increase in the number of cycles. Furthermore, the effects of agitation time, initial metal ions concentration, adsorbent dose, temperature and pH on the efficiency of Pb(II) ion removal were investigated as the controllable factors by Taguchi method. The value of correlation coefficients showed that the equilibrium data fitted well to the Langmuir isotherm. Among the adsorbents, zinc oxide-coated nanoporous carbon showed the largest adsorption capacity of 522.8 mg/g (2.52 mmol/g) which was almost close to that of the zinc oxide-coated (2.38 mmol/g), indicating the monolayer spreading of ZnO onto the oxidized mesoporous carbon. The results of the present study suggest that ZnO-coated nanoporous carbon can be effectively used for Pb(II) adsorption from aqueous solution, whereas a part of acidic functional groups may be contributed to binding the Pb(II) for the oxidized mesoporous carbon and mesoporous carbon. Kinetic studies indicated that the overall adsorption process of Pb(II) followed the pseudo-second-order model. The ZnO-coated nanoporous carbon was regenerated and found to be suitable of reuse of the adsorbent for successive adsorption–desorption cycles without considerable loss of adsorption capacity.     

Actualizing the role of morphometry in riverine hazards in an Eastern Himalayan river

Phosphorus (P) plays an important role in the eutrophication of river and marine environments. The adsorption-desorption processes of P by estuarine sediment were studied to better understand the P behaviour in the Loughor Estuary in Carmarthen Bay, UK. Three types of models were used to estimate the P adsorption isotherm for five sediment samples from the Loughor Estuary. The Langmuir adsorption isotherm showed a good fit with the linear (data) isotherm. The P desorption from bed sediment was measured as the easy exchangeable P (MgCl₂ extractable). A negative correlation was found between adsorbed P in bed sediment and median particle size. A positive correlation was also found between P adsorbed and metals such as iron (Fe), aluminium (Al) and calcium (Ca) as well as the total organic carbon (TOC).

     

Low-cost biochar derived from herbal residue: characterization and application for ciprofloxacin adsorption

Thermally carbonization biochar produced from a traditional Chinese herbal medicine waste (Astragalus mongholicus residue) was investigated for its performance in ciprofloxacin adsorption. Batch sorption experiments were conducted, and scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and Brunauer–Emmett–Teller surface area analyses were employed to characterize the biochar. The results demonstrated that thermal activation process improves the adsorbent characteristics. Biochar produced at 800 °C had the best adsorption capacity, a better pore structure and the largest surface areas. The adsorption process fit well to a pseudo-second-order kinetics model. The adsorption isothermal model results revealed that the adsorption process of ciprofloxacin is described better by the Freundlich isotherm and the type of adsorption is a chemical process. The maximum adsorption of ciprofloxacin occurred at pH 7. The present research demonstrated that A. mongholicus biochar might be an attractive and cost-effective adsorbent with good adsorption performance for removing ciprofloxacin from water solution.     

Dye adsorption on electrochemical exfoliated graphene oxide nanosheets: pH influence,kinetics and equilibrium in aqueous solution

Graphene oxide nanosheets were synthesized by electrochemical exfoliation. X-ray diffraction, scanning electron microscopy, atomic force microscopy, Raman spectrometry and Fourier transform infrared spectrometry were used to characterize crystal structure, particle size, thickness and function groups of the nanosheets. The nanosheets were examined for adsorption of methyl orange, an anionic dye, in aqueous solution at different pHs and temperatures. The maximum adsorption capacity of methyl orange on graphene oxide nanosheets obtained from the Langmuir isotherm was 138.69 mg/g at pH 2.0, which is larger than that of other carbonaceous adsorbents. The large adsorption affinity of graphene oxide nanosheets to methyl orange might be due to the presence of hydrogen bonding and π–π interaction between methyl orange and graphene oxide nanosheets. Adsorption kinetics followed a pseudo-second-order kinetic model, and the isotherm adsorption results were fitted with Langmuir isotherm model in a monolayer adsorption manner. The thermodynamic studies indicated that the adsorption reaction was a spontaneous physisorption process.     

Adsorption of Fe~(3+) Ions from Aqueous Solution by Natural and Synthetic Apatites: Kinetic,Equilibrium and Thermodynamic Study

In this study, the adsorption kinetics, equilibrium and thermodynamics of Fe3+ ions on natural (NAP) and synthetic (HAP) apaties were examined. The adsorption efficiency of Fe3+ onto the NAP and HAP was increased with increasing temperature. The kinetics of adsorption of Fe3+ ions was discussed using three kinetic models, the pseudo-first-order, the pseudo-second-order and the intra-particle diffusion model. The experimental data fitted very well the pseudo-second-order kinetic model. The initial sorption rate and the activation energy were also calculated. The activation energy of the sorption was calculated as 37.15 and 49.84 kJ·mol 1 for NAP and HAP, respectively. Experimental results were also analysed by the Langmuir, Freundlich and Dubinin–Redushkevich (D–R) isotherm equations at different temperatures. RL separation factor for Langmuir and the n value for Freundlich isotherm show that Fe3+ ions are favorably adsorbed by NAP and HAP. Various thermodynamic parameters such as enthalpy (ΔH), Gibbs free energy (ΔG) and entropy (ΔS) changes were computed and the results showed that the adsorption of Fe3+ ions onto NAP and HAP were spontaneous and endothermic in nature.     

Retention of a heavy metal by marl collected from aquifer substratum

One of the objectives of this work is to characterize marl samples collected from the bedrock aquifer (at 30 m depth) of Wadi Al Ghoula located in Draria southwest of Algiers. The other objective is to make a kinetics study, linear and non-linear isotherm study, and mass transfer study of the adsorption of copper onto marl in aqueous solution. The fitness of kinetics and isotherm models was evaluated by using some error analysis function. One of the major results using an XRF technique is an evidence of the presence of calcite in the weight of 13.82%. The XRD patterns of these samples confirmed the presence of montmorillonite, kaolinite, illite, calcite, and quartz. On the other hand, the FTIR analysis clarified the presence of calcite. The specific surface area of 20,999 m²/g was obtained using the BET, which indicates that the material has a predominance for the mesoporous character. The instrumental neutron activation analysis (INAA), a nondestructive method, gives the elemental composition of the adsorbent. Based on the value of the coefficient of determination, the adsorption kinetics of copper in aqueous solution using marl as adsorbent follows the pseudo-second-order model. And according to the value of the coefficient of determination obtained for the two models, the intraparticle diffusion and liquid film diffusion control the process of adsorption of copper onto marl with low predominance for the second model of diffusion in the first stage of adsorption. The linear and the non-linear treatments of the two-parameter isotherm models (Langmuir, Freundlish, Temkin) show that the fitting best model of isotherm is the empirical Freundlish isotherm. For the three-parameter isotherm models (Toth, Sips, and Redlish-Peterson), the Sips model is the more accurate fitting model than the two other isotherms in the non-linear approach. Some error analysis functions are used to choose the best results.     

Biosorption of Cd(II) from synthetic wastewater using dry biofilms from biotrickling filters

Biofilms wasted from biotrickling filters was dried and used as biosorbent for Cd(II) removal from aqueous solutions. The adsorption condition and effect, adsorption isotherms and kinetics of Cd(II) removal were investigated, and the effects of competitive metal ions on Cd(II) removal were also examined. Results showed that the dry waste biofilms reached the maximum adsorption capacity of 42 mg/g of Cd(II) at 25 °C for 120 min when the initial concentration of Cd(II) and their pH were 50 mg/L and 6.0, respectively. Under these conditions, the removal efficiency of Cd(II) reached to 89.3% when the biosorbent dosage was 2.0 g/L. The Langmuir isotherm model correlated with the isotherm data better than the Freundlich isotherm model, and the pseudo-second-order model fitted the kinetic data better than the pseudo-first-order model. These results indicated that the adsorption was monolayer accompanied with chemical adsorption. In the presence of other metal ions, divalent metal ions of Ca and Zn inhibited the performance of Cd(II) biosorption significantly, while Na(I), K(I) and Fe(III) which had a higher or lower valence than Ca(II) affected slightly when containing 50 mg/L Cd(II), 0.5 g/L adsorbent dosage and pH 6.0. The analyses of scanning electron microscopy and Fourier transform infrared spectroscopy illuminated that the biosorbent had porous structures and the amide group was the majorly responsible for Cd(II) removal. Dry biofilms were novel sorbents for effective removal Cd(II), and it could be reused and recycled if necessary.     

氧化锰、氧化铁、氧化铝对砷(Ⅲ)的吸附行为研究

合成了氧化锰、氧化铁、氧化铝三种矿物,以氧化铁、氧化锰为吸附剂研究了pH值、离子强度和时间等因素对吸附As(Ⅲ)的影响,并讨论了氧化锰、氧化铁、氧化铝三种矿物对As(Ⅲ)的饱和吸附容量及等温吸附实验。pH值对氧化锰吸附As(Ⅲ)几乎不影响,对氧化铁吸附As(Ⅲ)在很大的范围内(pH为3.5~8.5)影响不大,离子强度对二者吸附As(Ⅲ)的影响不大,吸附反应在0.5 h左右达到吸附平衡。在优化吸附条件下氧化锰、氧化铁、氧化铝对As(Ⅲ)的饱和吸附容量分别为48.38 mg/g、23.70 mg/g、3.52mg/g,三种合成矿物对As(Ⅲ)的饱和吸附容量:氧化锰氧化铁氧化铝。对实验数据进行Freundlich和Langmuir拟合,相关系数R均在0.98以上,吸附动力学符合Lagergren二级速率方程。     

Kinetic and equilibrium study of Ni(II) sorption from aqueous solutions onto Peganum harmala-L

In this study, the adsorption behavior of Ni(II) in an aqueous solution system using natural adsorbent Peganum harmala-L was measured via batch mode. The prepared sorbent was characterized by scanning electron microscope, Fourier transform infrared spectroscopy, N₂ adsorption–desorption and pH_zpc. Adsorption experiments were carried out by varying several conditions such as contact time, metal ion concentration and pH to assess kinetic and equilibrium parameters. The equilibrium data were analyzed based on the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms. Kinetic data were analyzed using the pseudo-first-order, pseudo-second-order and intra-particular diffusion models. Experimental data showed that at contact time 60 min, metal ion concentration 50 mg/L and pH 6, a maximum amount of Ni(II) ions can be removed. The experimental data were best described by the Langmuir isotherm model as is evident from the high R ² value of 0.988. The adsorption capacity (q _m) obtained was 68.02 mg/g at an initial pH of 6 and a temperature of 25 °C. Kinetic studies of the adsorption showed that equilibrium was reached within 60 min of contact and the adsorption process followed the pseudo-first-order model. The obtained results show that P. harmala-L can be used as an effective and a natural low-cost adsorbent for the removal of Ni(II) from aqueous solutions.     

Comparative study of the absorptive potential of raw and activated carbon <Emphasis Type="Italic">Acacia nilotica</Emphasis> for Reactive Black 5 dye

Acacia nilotica was used for the adsorption of Reactive Black 5 (RB5) dye from an aqueous solution. Both the raw and activated (with H₃PO₄) carbon forms of Acacia nilotica (RAN and ANAC, respectively) were used for comparison. Various parameters (including dye concentration, contact time, temperature, and pH) were optimized to obtain the maximum adsorption capacity. RAN and ANAC were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The maximum experimental adsorption capacities for RAN and ANAC were 34.79 and 41.01 mg g^?1, respectively, which agreed with the maximum adsorption capacities predicted by the Langmuir, Freundlich, and Dubinin–Radushkevich equilibrium isotherm models. The adsorption data of ANAC showed a good fit to the isotherm models based on the coefficient of determination (R ²): Langmuir type II (R ² = 0.99) > Freundlich (R ² = 0.9853) > Dubinin–Radushkevich (R ² = 0.9659). This result suggested monolayer adsorption of RB5 dye. The adsorption of RB5 dye followed pseudo-second-order kinetics. The RAN adsorbent reflected an exothermic reaction (enthalpy change, ΔH = ?0.006 kJ mol^?1) and increased randomness (standard entropy change, ΔS = 0.038 kJ mol^?1) at the solid–solution interface. In contrast, ANAC reflected both exothermic [?0.011 kJ mol^?1 (303–313 K)] and endothermic [0.003 kJ mol^?1 (313–323 K)] reactions. However, the ΔS value of ANAC was lower when the RB5 adsorption increased from 313 to 323 K. The negative values for the Gibbs free energy change at all temperatures indicated that the adsorption of RB5 dye onto RAN and ANAC was spontaneous in the forward direction.     

Single and binary adsorption of lead and cadmium ions from aqueous solution using the clay mineral beidellite

Beidellite, a low-cost, locally available and natural mineral was used as an adsorbent for the removal of lead and cadmium ions from aqueous solutions in batch experiments. The kinetics of adsorption process was tested for the pseudo first-order, pseudo second-order reaction and intra-particle diffusion models. The rate constants of adsorption for all these kinetic models were calculated. Comparison amongst the models showed that the sorption kinetics was best described by the pseudo second-order model. Langmuir and Freundlich isotherm models were applied to the experimental equilibrium data for different temperatures. The adsorption capacities (Q°) of beidellite for lead and cadmium ions were calculated from the Langmuir isotherm. It was found that adsorption capacity was in the range of 83.3–86.9 for lead and 42–45.6 mg/g for cadmium at different temperatures. Thermodynamic studies showed that the metal uptake reaction by beidellite was endothermic in nature. Binary metal adsorption studies were also conducted to investigate the interactions and competitive effects in binary adsorption process. Based on the optimum parameters found, beidellite can be used as adsorbent for metal removal processes.