Structural and metamorphic evolution of the phengite‐bearing schists of the northern Adula Nappe (Central Alps,Switzerland)

Phengite‐bearing schists of the northern Adula Nappe experienced a polymetamorphic and polycyclic evolution that was associated with five deformation episodes. Evidence of a pre‐Alpine metamorphic event is preserved within garnet cores of some amphibole‐bearing schists. The D1 and D2 deformation episodes are recorded by S1 and S2 foliations preserved only within metre‐scale domains of low‐D3 strain. S1 is a relict foliation. Blueschist‐facies conditions at 565 ± 10°C and 11.5 ± 1.5 kbar were attained during D2 and were associated with the development of isoclinal folding and an S2 foliation. The D3 episode took place at 665 ± 50°C and 11.5 ± 2.1 kbar and was responsible for the development of a transpositive S3 foliation. The D4 episode took place at T < 550 ± 10°C and was associated with the development of a discrete S4 foliation and S‐C structures. The D5 episode is recorded by sub‐vertical metre‐scale open folds or centimetre‐scale kinks. The structural and metamorphic evolution described here indicates that the northern and central parts of the Adula Nappe were distinct continental crustal fragments and were brought together under amphibolite‐facies conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Multistage metamorphism and deformation in high‐pressure metabasites of the northern Adula Nappe Complex (Central Alps,Switzerland)

Metabasites from the northern Adula Nappe Complex (ANC) display a complex microstructural evolution recording episodes of deformation and metamorphic re‐equilibration that were obliterated in the surrounding phengite‐bearing schists. Pre‐D1 and D1 deformation episodes are preserved as mineral inclusions within garnet cores of some amphibole‐bearing eclogites and record high‐temperature greenschist‐/amphibolite‐facies conditions. D2 produced an eclogite‐facies foliation which developed at 580 ± 70°C and 19 ± 3 kbar. D3 was a composite deformation episode which can be divided into three sub‐episodes D3m, D3a and D3b which occurred as the metamorphism evolved from post‐eclogitic high‐pressure and low‐temperature conditions through to amphibolite‐facies conditions at 590 ± 30°C and 11.7 ± 1.3 kbar. The D3 deformation episode was responsible for the development of the S3 regional‐scale foliation in the surrounding schists, whilst D4 caused the development of an S4 greenschist foliation. The composite nature of the D3 episode indicates that rocks of the northern ANC experienced a protracted post‐eclogitic structural reworking and that the current structure of this part of the Alps is a late‐Alpine feature. Copyright © 2010 John Wiley & Sons, Ltd.     

P–T–t–d evolution of orogenic middle crust of the Roc de Frausa Massif (Eastern Pyrenees): a result of horizontal crustal flow and Carboniferous doming?

Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.     

Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin

The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. ⁴⁰Ar/³⁹Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during T_max conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the T_max (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.     

Transverse lineation and large-scale structures related to Alpine obduction in Corsica

In Alpine Corsica, the major tectonic event during the late Cretaceous was the thrusting to the west of an ophiolitic nappe and its sedimentary cover upon the Variscan basement and its Mesozoic cover. A detailed field survey shows that the basal contact of the nappe corresponds to a pluri-kilometric scale shear zone. Thus gneissified basement slices have been tectonically emplaced in the ophiolitic nappe. The thrusting was responsible for small scale structures: foliation, lineation and folds, initiated in a HP/LT metamorphic context. The deformation analysis shows that the finite strain ellipsoid lies in the constriction field close to that for plane strain. Moreover occurrences of rotational criteria in the XZ planes (sigmoidal micas, asymmetric pressure shadows, quartz C-axes fabrics) are in agreement with shear from east to west. All structural data from microscopic to kilometric scales, of which the most widespread is a transverse stretching lineation, can be interpreted by a simple shear model involving ductile synmetamorphic deformation. At the plate tectonic scale the ophiolitic obduction is due to intraoceanic subduction blocked by underthrusting of continental crust beneath oceanic lithosphere.     

Kinematics and metamorphism of a cretaceous core complex: The veporic unit of the Western Carpathians

The Veporic basement and its Permian-Mesozoic cover experienced medium-pressure, collision-related metamorphism during the Cretaceous. Geothermobarometric calculations of Alpine mineral assemblages indicate peak conditions of 8–12 kbar and 550–600°C in the deepest-exposed basement, and up to 8 kbar and 450–500°C in the Permian metasediments. After having reached the metamorphic peak conditions (at around 110 Ma, ⁴⁰Ar/³⁹Ar on amphiboles), the thermally softened Veporic unit was exhumed probably due to the underplating of a buoyant Tatric-Fatric crust. Exhumation was triggered by extensional denudation of former upper-crustal thrust units, overlying the Veporic unit. Unroofing was accomplished due to orogenparallel, top-to-east extension along low-angle, ductile normal shear zones. The area collapsed and rapidly cooled at 90-80 Ma (⁴⁰Ar/³⁹Ar on micas). As revealed by the structural record, the doming and tectonic exhumation of the Veporic core occurred in an overall contractional regime and was followed by additional Late Cretaceous—Early Tertiary shortening events.     

How does shear zone nucleate? An example from the Suretta nappe (Swiss Eastern Alps)

In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.     

Deformation history of the ophiolite sequence from the Balagne Nappe,northern Corsica: insights in the tectonic evolution of Alpine Corsica

In Alpine Corsica, the Jurassic ophiolites represent remnants of oceanic lithosphere belonging to the Ligure‐Piemontese Basin located between the Europe/Corsica and Adria continental margins. In the Balagne area, a Jurassic ophiolitic sequence topped by a Late Jurassic–Late Cretaceous sedimentary cover crops out at the top of the nappe pile. The whole ophiolitic succession is affected by polyphase deformation developed under very low‐grade orogenic metamorphic conditions. The original palaeogeographic location and the emplacement mechanisms for the Balagne ophiolites are still a matter of debate and different interpretations for its history have been proposed. The deformation features of the Balagne ophiolites are outlined in order to provide constraints on their history in the framework of the geodynamic evolution of Alpine Corsica. The deformation history reconstructed for the Balagne Nappe includes five different deformation phases, from D1 to D5. The D1 phase was connected with the latest Cretaceous/Palaeocene accretion into the accretionary wedge related to an east‐dipping subduction zone followed by a Late Eocene D2 phase related to emplacement onto the Europe/Corsica continental margin. The subsequent D3 phase was characterized by sinistral strike‐slip faults and related deformations of Late Eocene–Early Oligocene age. The D4 and D5 phases were developed during the Early Oligocene–Late Miocene extensional processes connected with the collapse of the Alpine belt. Copyright © 2003 John Wiley & Sons, Ltd.     

HP/LT metamorphism in the Volparone Breccia (Northern Corsica, France): evidence for involvement of the Europe/Corsica continental margin in the Alpine subdution zone

The Alpine belt in Corsica (France) is characterized by the occurrence of stacked tectonic slices derived from the Corsica/Europe continental margin, which outcrop between two weakly or non‐metamorphic tectonic domains: the ‘autochthonous’ domain of the Hercynian basement to the west and the Balagne Nappe (ophiolitic unit belonging to the ‘Nappes supérieures’) to the east. These slices, including basement rocks (Permian granitoids and their Palaeozoic host rocks), Late Carboniferous–Permian volcano‐sedimentary deposits, coarse‐grained polymict breccias (Volparone Breccia) and Middle Eocene siliciclastic turbidite deposits, were affected by a polyphase deformation history of Alpine age, associated with a well‐developed metamorphic recrystallization. This study provides new quantitative data about the peak of metamorphism and the retrograde P–T path in the Alpine Corsica: the tectonic slices of Volparone Breccia from the Balagne region (previously regarded as unmetamorphosed) were affected by peak metamorphism characterized by the phengite + chlorite + quartz ± albite assemblage. Using the chlorite‐phengite local equilibria method, peak metamorphic P–T conditions coherent with the low‐grade blueschist facies are estimated as 0.60 ± 0.15 GPa and 325 ± 20 °C. Moreover, the retrograde P–T path, characterized by a decrease of pressure and temperature, is evidence of the first stage of the exhumation path from the peak metamorphic conditions to greenschist facies conditions (0.35 ± 0.06 GPa and 315 ± 20 °C). The occurrence of metamorphic peak at high‐pressure/low‐temperature (HP/LT) conditions is evidence of the fact that these tectonic slices, derived from the Corsica/Europe continental margin, were deformed and metamorphosed in the Alpine subduction zone during their underplating at ～20 km of depth into the accretionary wedge and were subsequently juxtaposed against the metamorphic and non‐metamorphic oceanic units during a complex exhumation history.     

Along-strike shear-sense reversal in the Vals-Scaradra Shear Zone at the front of the Adula Nappe (Central Alps,Switzerland)

The Adula Nappe in the Central Alps comprises pre-Mesozoic basement and minor Mesozoic sediments, overprinted by Paleogene eclogite-facies metamorphism. Peak pressures increase southward from ca. 1.2 GPa to values over 3 GPa, which is interpreted to reflect exhumation from a south-dipping subduction zone. The over- and underlying nappes experienced much lower Alpine pressures. To the north, the Adula Nappe ends in a lobe surrounded by Mesozoic metasediments. The external shape of the lobe is simple but the internal structure highly complicated. The frontal boundary of the nappe represents a discontinuity in metamorphic peak temperatures, between higher T in the Adula Nappe and lower T outside. A shear zone with steeply dipping foliation and shallowly-plunging, WSW-ENE oriented, i.e. orogen-parallel stretching lineation overprinted the northernmost part of the Adula Nappe and the adjacent Mesozoic metasediments (Vals-Scaradra Shear Zone). It formed during the local Leis deformation phase. The shear sense in the Vals-Scaradra Shear Zone changes along strike; from sinistral in the W to dextral in the E. Quartz textures also vary along strike. In the W, they indicate sinistral shearing with a component of coaxial (flattening) strain. A texture from the middle part of the shear zone is symmetric and indicates coaxial flattening. Textures from the eastern part show strong, single c-axis maxima indicating dextral shearing. These relations reflect complex flow within the Adula Nappe during a late stage of its exhumation. The structures and reconstructed flow field indicate that the Adula basement protruded upward and northward into the surrounding metasediments, spread laterally, and expelled the metasediments in front towards west and east.     

Metamorphism and uplift of Alpine schist in the Franz Josef–Fox Glacier area of the Southern Alps, New Zealand

Geothermometry and geobarometry of 10 garnet–oligoclase zone schists in the Franz Josef–Fox Glacier area, Southern Alps, New Zealand, give temperatures ranging from 415 to 625°C and pressures from 5.2 to 9.2 kbar, indicating a T–P array of about 50°C/kbar and inferred peak temperature conditions over a c. 15-km-thick section at depths between c. 20 and 34 km. The present-day distribution of the schist samples implies that only about one-third of the original crustal section is now exposed.
The garnet–oligoclase zone schists represent the deeper part of a metamorphosed and deformed accretionary complex that was associated with late Palaeozoic–early Mesozoic subduction along the Gondwana continental margin. Partial uplift ( c. 0.2 m/Ma) and erosion of the complex during Jurassic–Cretaceous times (Rangitata uplift) was synchronous with D2 deformation and recrystallization, as recorded by the P–T array. Cenozoic (Kaikoura) uplift and exhumation of the schist since c. 30 Ma to form the Southern Alps was associated with oblique-slip movement on the Alpine Fault. The present-day position and steep eastward dip of isograds and D2 structures suggest considerable clockwise rotation during uplift associated with ductile attenuation and tectonic thinning by over two-thirds of the original schist sequence, largely due to simple shear along schistosity planes. As the schist generally shows only incipient greenschist facies retrograde recrystallization, an apparently complete (although contracted) prograde mineral sequence has been preserved by rapid uplift (>5 km/Ma) of hot rock and the effects of limited shear heating near the Alpine Fault.     

Lu–Hf garnet systematics of a polymetamorphic basement unit: new evidence for coherent exhumation of the Adula Nappe (Central Alps) from eclogite-facies conditions

The Adula Nappe in the Central Alps is a mixture of various pre-Mesozoic continental basement rocks, metabasics, ultrabasics, and Mesozoic cover rocks, which were pervasively deformed during Alpine orogeny. Metabasics, ultrabasics, and locally garnet–mica schists preserve eclogite-facies assemblages while the bulk of the nappe lacks such evidence. We provide garnet major-element data, Lu profiles, and Lu–Hf garnet geochronology from eclogites sampled along a north–south traverse. A southward increasing Alpine overprint over pre-Alpine garnets is observed throughout the nappe. Garnets in a sample from the northern Adula Nappe display a single growth cycle and yield a Variscan age of 323.8 ± 6.9 Ma. In contrast, a sample from Alpe Arami in the southernmost part contains unzoned garnets that fully equilibrated to Alpine high-pressure (HP) metamorphic conditions with temperatures exceeding 800 °C. We suggest that the respective Eocene Lu–Hf age of 34.1 ± 2.8 Ma is affected by partial re-equilibration after the Alpine pressure peak. A third sample from the central part of the nappe contains separable Alpine and Variscan garnet populations. The Alpine population yields a maximum age of 38.8 ± 4.3 Ma in line with a previously published garnet maximum age from the central nappe of 37.1 ± 0.9 Ma. The Adula Nappe represents a coherent basement unit, which preserves a continuous Alpine high-pressure metamorphic gradient. It was subducted as a whole in a single, short-lived event in the upper Eocene. Controversial HP ages and conditions in the Adula Nappe may result from partly preserved Variscan assemblages in Alpine metamorphic rocks.     

Microstructure,metamorphism, thermochronology and P-T-t-deformation history of the Port aux Basques gneisses,south-west Newfoundland,Canada*

Abstract The Port aux Basques gneisses comprise three lithostratigraphic units separated by major fault zones: the Grand Bay Complex; the Port aux Basques Complex; and the Harbor le Cou Group. A similar regionally developed polyphase history of penetrative deformation characterizes each of these units. Thickening during D1 produced rare recumbent folds (F1) and an axial planar schistosity (S1), overprinted by D2 recumbent folds (F2), and transposed during development of a locally penetrative, differentiated crenulation cleavage (S2). In western sectors of the area, D2 was associated with NW-directed reverse shearing. The NE-trending structural grain reflects D3 transpression, partitioned into dextral transcurrent movement along major shear zones and development of upright-to-steeply inclined, periclinal folds (F3) and a variably penetrative schistosity (S3). Amphibolite facies metamorphism increases in grade from west to east across the area. Microstructures, including porphyroblast-matrix foliation relations and internal textural unconformities in garnet, indicate episodic porphyroblast nucleation and growth, which reflect a prograde traverse sequentially across univariant reactions during syntectonic metamorphism. Garnet, kyanite and staurolite porphyroblasts are wrapped by the S2 foliation, but each may contain trails of inclusions that define S1; commonly these trails preserve early stages of S2 crenulation cleavage development. Progressive and sequential reaction out of kyanite, staurolite and muscovite in favour of sillimanite, garnet, biotite and K-feldspar, and the development of an increasing volume of anatectic migmatite in south-eastern sectors of the area record syn- to late-D2 peak metamorphic conditions. Microstructural relationships and petrogenetic grid considerations indicate clockwise trajectories in P-T space for units of the Port aux Basques gneisses. Peak metamorphic conditions are estimated to have been 620–650° C at ≤8kbar in the west and 700–750° C at ≤8 kbar in the east. Titanite from an upper amphibolite facies calc-silicate gneiss yields U-Pb ages of c. 420 Ma, interpreted to date cooling shortly after the thermal peak in these gneisses. Variable D3 strain was associated with some recrystallization of hornblende and micas. ⁴⁰Ar/³⁹Ar hornblende plateau isotope correlation ages range from c. 419 to c. 393 Ma, from east to west across the area, and are interpreted to record cooling through c. 500° C coeval with or soon after D3 deformation. The range in ages may record the effects of heterogeneous D3 deformation and differential uplift from south-east to north-west associated with displacement on major shear zones. ⁴⁰Ar/³⁹Ar muscovite plateau ages cluster at c. 390 Ma, and date cooling through c. 375° C during regional exhumation. Cooling rates are moderate to fast and may indicate a component of tectonic exhumation. The Port aux Basques gneisses are a product of Silurian collisional tectonics. The higher grade of metamorphism in comparison with adjacent areas of the Canadian Appalachians is interpreted to reflect greater thickening due to juxtaposition of the St Lawrence promontory (Laurentian margin) with the Cabot promontory (Avalonian margin) during closure of the Iapetus Ocean.     

Chemical Features of White Micas from the Piemonte Calc-schists, Western Alps and Implications for K–Ar Ages of Metamorphism

Anomalously large chemical ranges in muscovite-paragonite and muscovite-celadonite systems are observed in white micas from the Piemonte calcschists in the Chisone valley area, internal western Alps. The petrographical and chemical observations on white mica strongly suggest that most mica crystals with high Na/K ratios in the chlorite zone are of detrital origin, and were derived from the pre-Alpine high-temperature metamorphic sequence such the Caledonian and/or Variscan. Submicroscopic muscovite (Ms) - paragonite (Pg) composite aggregates occur in the chlorite zone and their EPMA analyses give an apparent chemical composition range from Ms_0.6Pg_0.4 to Ms_0.2Pg_0.8. In the rutile zone, the paragonite content of the white micas is less than 20%, suggesting that the white micas have been homogenized during the Alpine metamorphism even if detrital white micas existed.Metamorphic mica is also very heterogeneous. The total range in Si content becomes wider with increasing of metamorphic grade: 3.22–3.39 pfu for the chlorite zone, 3.07–3.45 pfu for the chloritoid zone and 3.06–3.59 pfu for the rutile zone. This clearly indicates that the micas have experienced significant retrogressive chemical reactions during cooling and exhumations of the host schists.The detrital white mica in the chlorite zone has not reset well in its K-Ar system during the Alpine subduction-related metamorphism. The wide range of the white mica K-Ar ages from 115 to 41 Ma must be due to a mixture of various amounts of detrital white mica in the separates. This feature is also observed in the chloritoid zone though the age variation is not so large as that in the chlorite zone. In contrast, the mica in the rutile zone, which was higher than 450°C, has been reset completely during Alpine HP metamorphism.     

Age of blastomilonites of the Yenisei regional shear zone as evidence of the Vendian accretionary-collision events at the western margin of the Siberian Craton

The age of the latest impulse of dynamometamorphic structural-compositional transformations (603–615 Ma) was established from the ⁴⁰Ar-³⁹Ar age of micas from balstomilonites of the Garevka metamorphic complex of the Yenisei Ridge confined to the Priyenisei shear zone. The age of these tectonic-thermal events marks the final stage of the Neoproterozoic evolution of the Yenisei Ridge related to the accretion of the Isakovka terrane to the western margin of the Siberian Craton. These results are in agreement with the age of metamorphic rocks of northwestern Prisayany, which are incorporated into the Sayany-Yenisei accretionary belt along with Yenisei Ridge. The conformable data on two regions indicate a global Vendian accretionary-collision event, which led to the formation of the Sayany-Yenisei accretionary belt, lateral thickening of the continental crust to the southwestern margin of the Siberian Craton, and its subsequent tectonic reworking. The synchronous Vendian orogenesis and consequence of the tectonic-thermal events along the periphery of the large Precambrian cratons of the Baltic and Siberia confirm their close spatial relation about 800 Ma ago, which agrees with contemporary paleomagnetic reconstructions.     

P–T–t–D record of crustal‐scale horizontal flow and magma‐assisted doming in the SW Mongolian Altai

The Chandman massif, a typical structure of the Mongolian Altai, consists of a migmatite–magmatite core rimmed by a lower grade metamorphic envelope of andalusite and cordierite‐bearing schists. The oldest structure in the migmatite–magmatite core is a subhorizontal migmatitic foliation S1 parallel to rare granitoid sills. This fabric is folded by upright folds F2 and transposed into a vertical migmatitic foliation S2 that is syn‐tectonic, with up to several tens of metres thick granitoid sills. Sillimanite–ilmenite–magnetite S1 inclusion trails in garnet constrain the depth of equilibration during the S1 fabric to 6–7 kbar at 710–780 °C. Reorientation of sillimanite into the S2 fabric indicates that the S1–S2 fabric transition occurred in the sillimanite stability field. The presence of cordierite, and garnet rim chemistry point to decompression to 3–4 kbar and 680–750 °C during development of the S2 steep fabric, and post‐tectonic andalusite indicates further decompression to 2–3 kbar and 600–650 °C. Widespread crystallization of post‐tectonic muscovite is explained by the release of H₂O from crystallizing partial melt. In the metamorphic envelope the subhorizontal metamorphic schistosity S1 is heterogeneously affected by upright F2 folds and axial planar subvertical cleavage S2. In the north, the inclusion trails in garnet are parallel to the S1 foliation, and the garnet zoning indicates nearly isobaric heating from 2.5 to 3 kbar and 500–530 °C. Cordierite contains crenulated S1 inclusion trails and has pressure shadows related to the formation of the S2 fabric. The switch from the S1 to the S2 foliation occurred near 2.5–3 kbar and 530–570 °C; replacement of cordierite by fine‐grained muscovite and chlorite indicates further retrogression and cooling. In the south, andalusite containing crenulated inclusion trails of ilmenite and magnetite indicates heating during the D2 deformation at 3–4 kbar and 540–620 °C. Monazite from a migmatite analysed by LASS yielded elevated HREE concentrations. The grain with the best‐developed oscillatory zoning is 356 ± 1.0 [±7] Ma (²⁰⁷Pb‐corrected ²³⁸U/²⁰⁶Pb), considered to date the crystallization from melt in the cordierite stability ~680 °C and 3.5 kbar, whereas the patchy BSE‐dark domains give a date of 347 ± 4.2 [±7] Ma interpreted as recrystallization at subsolidus conditions. The earliest sub‐horizontal fabric is associated with the onset of magmatism and peak of P–T conditions in the deep crust, indicating important heat input associated with lower crustal horizontal flow. The paroxysmal metamorphic conditions are connected with collapse of the metamorphic structure, an extrusion of the hot lower crustal rocks associated with vertical magma transfer and a juxtaposition of the hot magmatite–migmatite core with supracrustal rocks. This study provides information about tectono‐thermal history and time‐scales of horizontal flow and vertical mass and heat transfer in the Altai orogen. It is shown that, similar to collisional orogens, doming of partially molten rocks assisted by syn‐orogenic magmatism can be responsible for the exhumation of orogenic lower crust in accretionary orogenic systems.     

Geothermobarometry, P–T paths and metamorphic field gradients of high-pressure rocks from the Adula Nappe, Central Alps

Metabasic rocks from the Adula Nappe in the Central Alps record a regional high‐pressure metamorphic event during the Eocene, and display a regional variation in high‐pressure mineral assemblages from barroisite, or glaucophane, bearing garnet amphibolites in the north to kyanite eclogites in the central part of the nappe. High‐pressure rocks from all parts of the nappe show the same metamorphic evolution of assemblages consistent with prograde blueschist, high‐pressure amphibolite or eclogite facies conditions followed by peak‐pressure eclogite facies conditions and decompression to the greenschist or amphibolite facies. Average PT calculations (using thermocalc ) quantitatively establish nested, clockwise P–T paths for different parts of the Adula Nappe that are displaced to higher pressure and temperature from north to south. Metamorphic conditions at peak pressure increase from about 17 kbar, 640 °C in the north to 22 kbar, 750 °C in the centre and 25 kbar, 750 °C in the south. The northern and central Adula Nappe behaved as a coherent tectonic unit at peak pressures and during decompression, and thermobarometric results are interpreted in terms of a metamorphic field gradient of 9.6 ± 2.0 °C km^?1 and 0.20 ± 0.05 kbar km^?1. These results constrain the peak‐pressure position and orientation of the nappe to a depth of 55–75 km, dipping at an angle of approximately 45° towards the south. Results from the southern Adula Nappe are not consistent with the metamorphic field gradient determined for the northern and central parts, which suggests that the southern Adula Nappe may have been separated from central and northern parts at peak pressure.     

Synmetamorphic structural evolution of the Seward Peninsula blueschist terrane,Alaska

Blueschist-facies rocks of the central Seward Peninsula cropout over 8000 km². Protoliths were Lower Paleozoic-Precambrian(?) shallow-water miogeoclinal sediments that were metamorphosed during the Middle Jurassic. Thermobarometric estimates yield ‘peak’ metamorphic conditions of 10–12 kbar at 460 ± 30°C. Crystallization of blueschist-facies minerals was synkinematic with development of a transposition foliation. This foliation is parallel to lithologic contacts and is axial planar to recumbent mesoscopic isoclinal folds. These folds are refolded by larger scale recumbent tight to isoclinal folds. Both fold sets have hinges parallel to a well-developed N—S stretching lineation. Sheath folds are also present. The long axes of the sheath folds also parallel the stretching lineation. This deformation was non-coaxial as indicated by microstructures and quartz c-axis fabrics. Folds nucleated, then rotated into parallelism with the stretching direction. Kinematic indicators show unequivocal top-to-the-north shear sense, compatible with blueschist formation during mid-Jurassic collision between the Brooks Range continental margin and a N-facing island arc (Yukon-Koyukuk). Convergence of these two plates is believed to have been nearly N—S (in present co-ordinates).