Sulfur speciation and associated trace metals (Fe,Cu) in the pore waters of Great Marsh,Delaware

The pore waters of sediments from a salt marsh along the Delaware estuary have been analyzed for sulfur species and associated trace metals. Since the sediment interface is usually in contact with the atmosphere, the sulfur species are dependent on the production of hydrogen sulfide by sulfate reduction and subsequent oxidation by diffusing oxygen. The most important species observed are hydrogen sulfide, polysulfide ions and thiosulfate. Secondary reactions of hydrogen sulfide and polysulfides with decomposing organic matter yield significant concentrations of both thiols and organic polysulfides. Upon isolation of the sediment from the atmosphere due to tidal inundation, bacterial sulfate reduction becomes the dominant process. This results in the reduction of the polysulfides in agreement with thermodynamic predictions, and suggests that the redox couple sulfide/polysulfide is a good redox indicator under such reducing environments.The concentrations of trace elements Cu and Fe in the pore waters are mainly controlled by sulfide formation. Calculations show that copper is strongly complexed probably with organo-sulfur ligands. Iron might be complexed as such sulfur species to a much lesser extent than copper.     

Geochemical distribution of hydrocarbons in sediments from mid-Narragansett Bay,Rhode Island

The concentration of hydrocarbons (saturated and aromatic) and synthetic chlorinated compounds (Chlordane, DDT, and PCBs) decreased with depth in sediment cores from mid-Narragansett Bay and reached background levels at different depths. These depths were in general agreement with those expected based on the chronological inputs of these materials to the Bay. Although the total hydrocarbons concentration decreased with depth, the biogenic n-alkanes (n-C_{25,27,29,31,33}) showed a fairly constant concentration with depth as did the organic carbon content of these sediments. The n-alkane odd/even ratio increased with depth in the cores. Size fractionation (> 45 μm and < 45 to > 0.3 μm) of two core sections showed more hydrocarbons associated with the smaller size fraction in the surface section, while the lower section had approximately equal concentrations in both fractions. These trends suggest that over the time period covered by these cores the inputs of biogenic materials has remained relatively constant, while the input of anthropogenic hydrocarbons has increased dramatically during the last 100 yr. This increase is probably due to the expanded use of petroleum over this time period and subsequent chronic inputs to this estuarine environment.     

Biogeochemistry of fatty acids in recent sediments from Narragansett Bay,Rhode Island

The fatty acid composition of sediments from Narragansett Bay show significant variation between certain areas of the Bay. Both the organic carbon and fatty acid concentrations decrease with increasing distance from the Providence River area—an area which received municipal sewage and industrial effluents. The ratio of the fatty acid concentration to organic carbon concentration is fairly constant for all stations sampled. The variations in the relative abundance of fatty acids may reflect either the influence of fatty acids discharged to the river area by sewage effluents or the synthesis of fatty acids by microbial populations which probably differ for the areas compared. Temporal variations in fatty acid composition and fatty acid concentration are minimal. Lipolytic activity has been demonstrated and probably acts on glycerides deposited to the sediments releasing free fatty acids shortly after deposition. A model for the diagenesis of fatty acids in Recent sediments is proposed based upon the above findings and upon earlier reports by the authors and by other investigators.     

On the formation of perylene in recent sediments: kinetic models

The concentration of perylene increases regularly with depth in a radiometrically dated sediment core from Mountain Pond, Coburn Mountain, Maine, U.S.A. This concentration profile was fit to simple reaction kinetic models which indicate that perylene forms in this core either by a first order reaction characterized by a rate constant of 0.012 yr^?1 or by a second order reaction characterized by a rate constant of 0.0013 nmole^?1g yr^?1.     

Factors affecting the association of fatty acids with mineral particles in sea water

Certain factors influencing the incorporation, transport and release of fatty acids by clay minerals, calcite and marine sediments have been investigated.Salinity was found to be an important factor. The adsorption of heptadecanoic acid by bentonite clay at 4%. was nearly triple that at 0%.. However, from 4%. to 35%., only a minor adsorption increase occurred. This behavior is believed to be related to flocculation of the clay at the lower salinity range. The pH over the range of 6.0–8.5 has a small influence on fatty acid-clay association, depressing it somewhat as the basicity increases.When the temperature of the fatty acid solution was increased from 0°C to 50°C, a decrease in adsorption on to clay was found. This effect may be due to increased water solubility of the acid at higher temperatures, since solubility is very important in controlling the degree of fatty acid-mineral interaction. Furthermore, apparent solubilization of fatty acids by indigenous dissolved organic matter in sea water reduces adsorption on to clay minerals.Based upon the heat of adsorption of ?14.6 kcal/mole, fatty acids are physically bound to clay minerals by weak van der Waals forces and hydrogen bonds.Bentonite and kaolinite were found to be the most adsorptive minerals investigated, followed in order by illite, montmorillonite and calcite. Sediments from Narragansett Bay were found to lie between illite and montmorillonite in adsorptive capacity after indigenous sediment organic matter had been removed. Sediment organic matter reduced fatty acid uptake by a factor of 1.6.     

Gypsum-organic interactions in the marine environment: sorption of fatty acids and hydrocarbons

Free fatty acids make up the bulk (50–84% wt/wt) of lipid materials recovered from artificial gypsum precipitates and crystals collected from sea salt evaporation pans. Both the fatty acids and hydrocarbons associated with artificial gypsum tend to be of longer mean chain length than organic materials dissolved in the mother liquor. Increased specific adsorption of n-fatty acids at Ca²⁺ sites on gypsum surfaces is positively correlated with alkyl chain length. Neutral lipids were not significantly enriched in either type of gypsum precipitates. The fatty acids associated with gypsum from sea salt evaporation pans are branched fatty acids in contrast to the predominantly normal acids associated with artificial gypsum samples. Differences in the two adsorbed acid distributions are attributed to the unique lipids of hypersaline biota.     

Closed system Fischer-Tropsch synthesis over meteoritic iron,iron ore and nickel-iron alloy

Meteoritic iron, iron ore and nickel-iron alloy (either alone or in some cases mixed with alumina, carbonaceous chondrite, potassium carbonate or sodium carbonate) were used to catalyze the reaction of deuterium and carbon monoxide in a closed reaction vessel. The mole ratio of deuterium to carbon monoxide ranged from 1/2:1 to 10:1, the reaction temperature from 195 to 370°C, and the reaction time from 6 to 480 hr. Analysis of the reaction products showed that normal alkanes and alkenes (C₁₁-C₂₅), their monomethyl substituted isomers and aromatic hydrocarbons (e.g. naphthalene, acenaphthene, fluorene, phenanthrene and the methyl derivatives of these hydrocarbons) were synthesized. In addition to the aforementioned hydrocarbons, one reaction product was shown to contain perdeutero normal fatty acids (10:0–16:0).     

Infrared study of the pyrolysis products of sporopollenin and lignite

The effect of pyrolysis at increasing temperature on sporopollenin, lignite and sporopollenin oxidized at 200°C has been investigated using measured infrared band absorption coefficients.Oxidation of sporopollenin in air at 200°C is marked by a decrease in the content of saturated hydrocarbon chains and a strong increase in the concentration of carboxylic acid groups.Pyrolysis of a thick bed of sporopollenin at increasing temperatures leads to the removal of a large proportion of oxygenated functions, before the removal of hydrocarbons. For lignite and oxidized sporopollenin, the loss of both types of functional groups extends over a broader temperature range. Reorganization of the carbonaceous residue at high temperature is hindered if a sufficiently low content of oxygenated functions, carbonyl and carboxyl as well as hydroxyl and ether groups, is not reached before the elimination of hydrocarbons.     

The contribution of humic substances to the acidity of colored natural waters

An operationally defined carboxyl content of humic substances extracted from rivers, streams, lakes, wetlands, and groundwaters throughout the United States and Canada is reported. Despite the diversity of the samples, only small variations were observed in this humic carboxyl content. The dissociation behavior of two combined fulvic/humic acid extracts was studied and it was found that the dissociation of the humics varied in a predictable manner with pH. Using a carboxyl content of 10 μeq/ mg humic organic carbon, and mass action quotient calculated from sample pH, the ionic balances of three highly colored Nova Scotia rivers were estimated.     

Carbonate equilibria in hydrothermal systems: First ionization of carbonic acid in NaCl media to 300°C

The ionization quotients of aqueous carbon dioxide (carbonic acid) have been precisely determined in NaCl media to 5 m and from 50° to 300°C using potentiometric apparatus previously developed at Oak Ridge National Laboratory. The pressure coefficient was also determined to 250°C in the same media. These results have been combined with selected information in the literature and modeled in two ways to arrive at the best fits and to derive the thermodynamic parameters for the ionization reaction, including the equilibrium constant, activity coefficient quotients, and pressure coefficients. The variation with temperature of the two fundamental quantities $\text{Δ}\text{V}\text{?}{}^{\mathrm{o}}$ and $\text{Δ}\text{C}\text{?}{}^{\mathrm{o}}{}_{\mathrm{p}}$ were examined along the saturation vapor pressure curve and at constant density. The results demonstrated again that for reactions with minimal electrostriction changes the magnitudes and variations of $\text{Δ}\text{C}\text{?}{}^{\mathrm{o}}{}_{\mathrm{p}}$ and $\text{Δ}\text{V}\text{?}{}^{\mathrm{o}}$ with temperature are small and, in addition, $\text{Δ}\text{C}\text{?}{}_{\mathrm{p}}$ and $\text{Δ}\text{V}\text{?}$ are approximately independent of salt concentration.The results have also been applied to an examination of the solubility of calcite as a function of pH (in a given NaCl medium) for the neutral to acidic region both for systems with fixed CO₂ pressure and systems where the calcium ion concentration equals the concentration of carbon. The pH of saturated solutions of calcite with P_CO2 of 12 bars increases from 5.1 to 5.5 between 100° and 300°C.     

A thermochemical study of glasses and crystals along the joins silica-calcium aluminate and silica-sodium aluminate

Enthalpies of solution in molten 2PbO · B₂O₃ at 985 K are reported for series of glasses xCa_0.5AlO₂-(1?x)SiO₂ (O ≤ x ≤ 0.99) and xNaAlO₂-(1?x)SiO₂ (0 ≤ x ≤ 0.56). The data are compared to values for the corresponding crystalline aluminosilicates and to preliminary data for systems containing KAlO₂ and Mg_0.5AlO₂. The enthalpies of mixing of glasses become more exothermic with increasing basicity of the mono- or divalent oxide. The tendency toward immiscibility on the silica-rich side, indicated by the shape of the heat of mixing curve between x = 0 and x = 0.4, is pronounced in the calcium aluminate system, but not in the sodium aluminate system. The shape of the heat of mixing curve, which is roughly symmetrical about x = 0.5, can be rationalized in terms of glass structure by considering essentially random substitution of Si and Al on a continuous three dimensional tetrahedral framework, with stabilization arising from electrostatic interactions between aluminum and the nonframework cation balancing the destabilizing effects arising from perturbation of the aluminosilicate framework by the nonframework cation. These trends are consistent with the variation of physical properties of aluminosilicate melts.     

Oxidation products of Mn(II) in lake waters

Oxygenation of Mn(II)-rich water samples taken from two English lakes (Esthwaite Water, Cumbria, and Rostherne Mere, Cheshire) during the summer months caused the precipitation of Mn-oxide, the process being catalysed by particulate matter. The Mnoxide formed resembles vernadite (δ-MnO₂) with regard to: (1) Mn oxidation state (> 3.6 in all but one case); and (2) its fine morphology (crumpled thin sheets) as determined by electron microscopy. The precipitates are, however, rather amorphous to X-rays, giving only very weak reflections which cannot be assigned unequivocally. Electron probe microanalysis shows the presence of a number of other elements in the Mn-containing phase. The most abundant is Ca (Ca/Mn weight ratio $\text{? 0.1}$), others are Mg, Si, P, S, Cl, K, Ba and Fe. The precipitates contain much organic matter (20–30 wt.%) but little appears to be associated directly with the Mn phase. Only small amounts (～ 1 wt.%) of humic substances are present. Some but not all of the specimens examined had the gross morphology of Metallogenium, a Mn-depositing bacterium.Naturally occurring Mn-oxides present in Esthwaite Water during the summer resemble, the products of oxygenation in their fine morphology and contents of other elements. Mn-oxides present during the winter are somewhat different morphologically. In one summer sample of particulate matter from Esthwaite Water no Mn-oxide could be found by electron microscopic examination, but Mn was found concentrated in bacteria. This observation, the rapid rates of oxidation and the high Mn oxidation states, suggest that bacteria might play a rôle in catalysing the oxidation of Mn(II).     

Infrared study of the adsorption on silica of a collector with an oxyethylene chain

Positive results obtained for the flotation of quartz at low pH by a molecule containing a polyoxyethylene chain ($\text{OPEG}\text{=}\text{Triton}\text{× 100}$) led us to examine the nature of the interactions between this collector and the quartz surface, using infrared spectroscopy and considering a porous silica as a model adsorbent.The infrared spectra obtained after adsorption of increasing amounts of OPEG show the disappearance of the free OH groups of silica surface and the development of a band due to bridged hydroxyls. This indicates the formation of hydrogen bonds between ether groups of the collector and silica surface hydroxyls.     

Some mineral stability relations in the system CaOMgOSiO2H2OHCl

Mineral-aqueous solution equilibria for the assemblages talc-quartz, tremolite-talc-quartz, diopside-tremolite-quartz, wollastonite-diopside-quartz and wollastonite-quartz have been studied at 2 kb total pressure, 500° to 700°C and chloride concentrations from 0.03 to 6.0 molal. Most work was at 1 m chloride. Both buffered and unbuffered data were obtained and a recalibration of the Ag-AgCl buffer is presented. Log equilibrium quotients at 500°, 600° and 700°C are respectively: Ta-Qz () 2.57, 1.71, 0.73; Tr-Ta-Qz and Di-Tr-Qz () 4.98, 3.99, 2.21 and 7.29, 5.30, 3.56; WoDi-Qz () 3.30, 3.00, 2.79: Wo-Qz () 5.15, 3.95, 2.68. Mineral stability fields plotted in terms of these concentration data more tangibly represent the compositional character of real systems and the mass transfer capabilities of their fluids than do the analogous theoretical activity diagrams.Overall dissociation constants of MgCl₂ and CaCl₂ were calculated from the experimental data using the calculated ionic activity constants for the reactions and the established dissociation constants of HCl. The negative log values are respectively: 3.88. 6.63, 9.20 for CaCl₂ and 4.60, 7.54, 10.37 for MgCl₂ at 500°, 600° and 700°C, 2 kb. The Ca values are about an order of magnitude more positive than the conductance-derived values by Frantz and Marshall (1982).The phase relations developed in this study have application to the genesis of talc, tremolite, and diopside-bearing assemblages in some regional metamorphic rocks, but more specifically to the calcsilicate skarn assemblages of many metasomatic aureoles. The equilibrium fluids are characterized by high concentrations of Ca relative to Mg and increasing $\text{Ca}\text{Mg}$ ratios with decreasing temperatures. The stability fields of talc, tremolite, and quartz expand relative to those of diopside and wollastonite with decreasing temperature, hence their more common appearance as retrograde products in skarn systems.     

Stable carbon isotope evidence for two sources of organic matter in coastal sediments: seagrasses and plankton

Organic carbon from sediments collected in Texas seagrass meadows was enriched in ¹³C by an average of 6.6% relative to organic carbon from offshore sediments. Within the South Texas hay system examined. δ¹³C values became increasingly more typical of offshore sediments with increasing distance from seagrass meadows. This permits the use of carbon isotope data as a measure of the relative contributions of seagrasses and plankton to sedimentary organic matter.     

The solubility of medium molecular weight aromatic hydrocarbons and the effects of hydrocarbon co-solutes and salinity

The solubilities of several medium molecular weight aromatic hydrocarbons were determined at 25°C in aqueous binary, ternary, and quaternary systems. The binary systems consisted of distilled water plus one each of the following: naphthalene, 1-methylnaphthalene, 2-methylnaphthalene, biphenyl, 2-ethylnaphthalene, 1,5-dimethylnaphthalene, 2,3-dimethylnaphthalene, 2,6-dimethylnaphthalene, acenaphthene and phenanthrene. The ternary systems consisted of distilled water plus one of the following hydrocarbon pairs: naphthalene/biphenyl, naphthalene/acenaphthene, naphthalene/phenanthrene, biphenyl/phenanthrene, biphenyl/2-methylnaphthalene, acenaphthene/phenanthrene and 2-methylnaph-thalene/phenanthrene. Quaternary systems consisted of distilled water and one of the following hydrocarbon mixtures: naphthalene/biphenyl/phenanthrene, 2-methylnaphthalene/biphenyl/phenanthrene and naphthalene/acenaphthene/phenanthrene. In binary systems at S%. = 0, solubilities ranged from 31.3 ppm for naphthalene to 1.07 ppm for phenanthrene. The alkyl naphthalenes exhibited solubilities which were a function of molar volume and substituent size and position. In ternary and quaternary systems, solubilities often deviated from values obtained in binary systems presumably due to solute-solute interactions and/or formation of solid solutions. Aromatic hydrocarbons are ‘salted out’ by increasing concentrations of inorganic salts. At S%. = 35, the solubility of naphthalene is 22.0 ppm and of phenanthrene, 0.71 ppm. The empirical salting parameters are identical in both binary and quaternary systems.     

Volatile organic compounds in coastal seawater

The occurence and temporal variations of a variety of low to medium polarity organic compounds in the volatility range bracketed by n-heptane and n-octadecane have been studied in seawater from a station in Vineyard Sound, Massachusetts, and from a tidal creek in Sippewisset Marsh, Massachusetts. The closed-loop vapor phase stripping method of Grob and Zürcher (J. Chromatogr., v. 117, p. 285–294), high resolution glass capillary gas chromatography, and gas chromatography-mass spectrometry were used. Approximately 50 compounds were found at ≥ 2 ng/kg; most were recovered at less than 10 ng/kg, while the 20 ng/kg level was only rarely exceeded by a few components. The total material recovered was 0.2–1.0 μg organic carbon equivalent/kg seawater. The major compound classes found were normal alkanes, alkenes, aromatic and alkylaromatic hydrocarbons, n-aldehydes, dimethyldisulfide and dimethyltrisulfide, and a few halogenated hydrocarbons. The preliminary results suggest that both biogenic and anthropogenic sources were representted. Also, air-sea gas exchange and other physical processes may be important non-biological sinks.     

The stereoisomeric composition of phytanyl chains in lipids of Dead Sea sediments

Lipid extracts from five recent Dead Sea sediments were analyzed for isoprenoid compounds and the following were isolated: free and phospholipid-bound di-O-phytanylglycerol, free phytanol and free and esterifled phytanic acid. The phytanyl groups of the diether and the free phytanol were oxidized to the corresponding phytanic acid; the stereoisomeric composition of the derived phytanic acids as well as of the ester-bound phytanic acid was determined by open-tubular gas-liquid chromatography of the corresponding methyl esters on butanediolsuccinate polyester. Only the 3R,7R,11R-isomer of phytanic acid was detected in each of the phytanate samples, indicating that these phytanyl chains in the Dead Sea sediments are most likely derived from extremely halophilic bacteria rather than from phytol of chlorophyll origin. These findings also provide further evidence that the mixtures of RRR and SRR-phytanic acids previously isolated from organic-rich shales were most likely derived from the phytyl chain in chlorophyll.     

Polymer-stabilized emulsions and fine-particle recovery,II. The chalcopyrite-quartz system

The interaction between fine, generally ?2 μm chalcopyrite and polymer-stabilized oil droplets has been studied as a function of pH and weight percent solids in the pH range from 5 to 12. Oil droplets stabilized by partially esterified polymethacrylic acid and cellulose xanthate have been used as collectors. Chalcopyrite may be efficiently separated from fine quartz gangue at pH 11, using cellulose xanthate stabilized emulsions. Good recovery and grade may be obtained at pH 11 up to pulp densities of at least 5.1 wt.%. At other pH values, selectivity is poor due to Cu¹¹ species from chalcopyrite activating the quartz surface.