The Influence of Benthic Macrofauna on the Erodibility of Intertidal Sediments with Varying mud Content in Three New Zealand Estuaries

Fine sediment inputs can alter estuarine ecosystem structure and function. However, natural variations in the processes that regulate sediment transport make it difficult to predict their fate. In this study, sediments were sampled at different times (2011–2012) from 45 points across intertidal sandflat transects in three New Zealand estuaries (Whitford, Whangamata, and Kawhia) encompassing a wide range in mud (≤63 μm) content (0–56 %) and macrofaunal community structure. Using a core-based erosion measurement device (EROMES), we calculated three distinct measures of sediment erosion potential: erosion threshold (? _c ; N m^?2), erosion rate (ER; g m^?2 s^?1), and change in erosion rate with increasing bed shear stress (m _e ; g N^?1 s^?1). Collectively, these measures characterized surface (? _c and ER) and sub-surface (m _e ) erosion. Benthic macrofauna were grouped by functional traits (size and motility) and data pooled across estuaries to determine relationships between abiotic (mud content, mean grain size) and biotic (benthic macrofauna, microbial biomass) variables and erosion measures. Results indicated that small bioturbating macrofauna (predominantly freely motile species <5 mm in size) destabilized surface sediments, explaining 23 % of the variation in ? _c (p ≤ 0.01) and 59 % of the variation in ER (p ≤ 0.01). Alternatively, mud content and mean grain size cumulatively explained 61 % of the variation in m _e (p ≤ 0.01), where increasing mud and grain size stabilized sub-surface sediments. These results highlight that the importance of biotic and abiotic predictors vary with erosion stage and that functional group classifications are a useful way to determine the impact of benthic macrofauna on sediment erodibility across communities with different species composition.     

Determination of atrazine isotherms on agricultural soils

For determination of atrazine isotherms in agricultural soils of Fars Province, composite soil samples from 0 to 5 cm depth with textures of silty clay loam, clay loam and loam were collected. In order to form the atrazine isotherms, 10, 50 and 100 µg atrazine g^?1 soil was added to the soil samples. Soluble atrazine in water:soil ratios of 10:1, 50:1 and 200:1 was measured after 3-h shaking. Finally, for each cases of applied atrazine, water extractable atrazine was determined and quantified using gas chromatography instrument. The results indicated that there was a linear relationship between the logarithms of water extractable atrazine and added atrazine for different water:soil ratios. A general equation of WEA = K(WS) ^α (AA) ^β is obtained experimentally between water extractable atrazine, µg g^?1(WEA), and added atrazine, µg g^?1 (AA), where K, α and β are absorption constants; WS is the water:soil ratio, g g^?1. For the loam, silty clay loam and clay loam soil textures, the α were 0.49, 0.23 and 0.13, respectively, the β were 0.55, 0.806 and 0.21, respectively, and the K were 1.44, 0.78 and 25.38, respectively.     

Composition,Abundance, and Life History of Mysids (Crustacea: Mysida) in the Coastal Lagoons of MD,USA

The composition, abundance, biomass, and life history of mysid species were investigated and described for the first time in the Maryland Coastal Bays (38° N, 75° W), Mid-Western Atlantic, using data collected from 2010 to 2013. Three species of mysids were collected, with Neomysis americana being the most abundant species (maximum mean abundance 6.7 ± 6.4 numbers (nos.) m^?2 in July 2013 and biomass 2.78 ± 2.76-mg dry weight (DW) m^?2 in July 2012). Americamysis bahia was the second most abundant species (maximum mean abundance: 0.7 ± 0.4 nos. m^?2 and biomass: 0.23 ± 0.14 mg DW m^?2 in March 2012). Metamysidopsis swifti made up 0.02 to 2 % of mysids and were found in samples collected mainly from southern Chincoteague Bay close to that Bay’s inlet in the fall of 2012. The two most abundant mysid species reproduced continuously from March to July (Neomysis) and May to October (Americamysis). N. americana had larger body and brood sizes than A. bahia. Mysids were relatively low in abundance in late summer, a period of relatively high biomass of fish predators, than during other seasons, suggesting that intense predation might be controlling their abundance. The increase in mysid abundance in the fall following their disappearance in late summer without evidence of reproductive activities suggests species migration from coastal waters into the Maryland Coastal Bays. This annual mysid subsidy perhaps helps to sustain their populations within the bays.     

Exploring the diverse potentials of <Emphasis Type="Italic">Planococcus</Emphasis> sp. TRC1 for the deconstruction of recalcitrant kraft lignin

Kraft lignin (KL) is the chief contaminant which is responsible for dark coloration, toxicity and high chemical oxygen demand (COD) of paper pulp mill effluent. The present study investigated the diverse potentials of Planococcus sp. TRC1 in the biodegradation of KL. Preliminary evaluation indicated that the strain was able to grow on broad spectrum of lignin-derived compounds, decolorize lignin-mimicking dyes and catabolize substrates of ligninolytic enzymes. Response surface methodology (RSM) was executed to perform the optimization of different process parameters. The results displayed that Planococcus sp. TRC1 could completely utilize 100 mg L^?1 of KL and 78% of 200 mg L^?1 of KL as sole source of carbon with concurrent reduction in COD and color. The biokinetic details of KL biodegradation showed that the values of \(\mu^{*}\), µ _max, \(q^{*}\) and q _max were 0.018 h^?1, 0.01 h^?1, 0.023 g g^?1 h^?1 and 0.05 g g^?1 h^?1, respectively. UV–visible spectrophotometry, SEM and FTIR indicated the significant alterations in the surface morphology, functional groups and chromophores during the course of biodegradation. XRD revealed the emergence of peak signifying the formation of low molecular weight intermediates after bacterial treatment. Considering the environmental impact, bacterial-treated KL illustrated less phytotoxicity using Vigna radiata seed bioassay. These results suggested that Planococcus sp. TRC1 could be a promising strain for the degradation of KL in an ecofriendly way.     

The effects of petroleum-contaminated soil on photosynthesis of <Emphasis Type="Italic">Amorpha fruticosa</Emphasis> seedlings

A pot experiment was conducted to monitor the dynamic response of photosynthesis of Amorpha fruticosa seedlings to different concentrations of petroleum-contaminated soils from April to September. The results showed that the photosynthetic rates, stomatal conductance and transpiration rate of seedlings significantly decreased in 5–20 g kg^?1 petroleum-contaminated soil during the three given sampling period of July 31 (early), August 30 (mid-term) and September 29 (late). However, the intercellular CO₂ concentration significantly increased in 10 g kg^?1 contaminated soil, while declined in 20 g kg^?1 contaminated soil during the early sampling period as well as in 20 g kg^?1 contaminated soil during the late sampling period. The leaf relative water content of seedlings significantly increased in 20 g kg^?1 contaminated soil during the early sampling period, while it dropped dramatically in 15–20 g kg^?1 contaminated soil during the late sampling period. The contents of chlorophyll a, chlorophyll b and the total chlorophyll of seedlings showed a sharp decline during the three sampling periods in contaminated soil. Comprehensively, considering the negative effects of petroleum on the photosynthesis, growth performance and remediation effect on petroleum of A. fruticosa seedlings, this plant was tolerant of petroleum-contaminated soil and was potentially useful for the phytoremediation of petroleum-contaminated sites in northern Shaanxi, China.     

Evaluation of effective nutritional parameters for <Emphasis Type="Italic">Scenedesmus</Emphasis> sp. microalgae culturing in a photobioreactor for biodiesel production

Recently, microalgae are considered as lipid sources for biodiesel production. A photobioreactor was designed and fabricated for Scenedesmus sp. microalgae cultivation. The effect of several nitrogen sources, light intensity, iron ions, silicon, magnesium sulfate and ethanol concentrations on Scenedesmus sp. microalgae growth were investigated. For incubation period of 8 days, sodium nitrate and ammonium carbonate were the best nitrogen sources with biomass concentrations of 2.373 and 2.254 g L^?1, respectively. Microalgae growth was reduced using nitrogen concentrations above 0.7 g L^?1. In the first 10 days of incubation, maximum cell dry weight (0.7 g L^?1) was obtained with light intensity of 10,000 lx, whiles after that, the results were desired (1 g L^?1) using interior lighting at 7500 lx. Magnesium sulfate had a positive effect on cell growth. The biomass concentration of 1.65 g L^?1 was obtained using 0.06 g L^?1 magnesium sulfate. Maximum obtained biomass with silicon (0.7 Mm), ethanol (1.8 mL L^?1) and ferric ammonium citrate (0.02 g L^?1) was 1.7 and 1.3 and 2.16 g L^?1, respectively. Logistic model was found to be a suitable model for cell growth forecast. Fatty acid analysis showed that composition of the most dominant synthesized fatty acids, palmitic and oleic acids, was 21.16 and 33.58%, respectively. Oil produced by Scenedesmus sp. microalgae composed of 49.08% saturated and 43.53% unsaturated fatty acids has a suitable composition for a desired biodiesel.     

Behavior of 10-Å phase at low temperatures

The thermal evolution of 10-Å phase Mg₃Si₄O₁₀(OH)₂·H₂O, a phyllosilicate which may have an important role in the storage/release of water in subducting slabs, was studied by X-ray single-crystal diffraction in the temperature range 116–293 K. The lattice parameters were measured at several intervals both on cooling and heating. The structural model was refined with intensity data collected at 116 K and compared to the model refined at room temperature. As expected for a layer silicate on cooling in this temperature range, the a and b lattice parameters undergo a small linear decrease, α _a  = 1.7(4) 10^?6 K^?1 and α _b  = 1.9(4) 10^?6 K^?1, where α is the linear thermal expansion coefficient. The greater variation is along the c axis and can be modeled with the second order polynomial c _T  = c ₂₉₃(1 + 6.7(4)10^?5 K^?1ΔT + 9.5(2.5)10^?8 K^?2(ΔT)²) where ΔT = T ? 293 K; the monoclinic angle β slightly increased. The cell volume thermal expansion can be modeled with the polynomial V _T  = V ₂₉₃ (1 + 8.0 10^?5 K^?1 ΔT + 1.4 10^?7 K^?2 (ΔT)²) where ΔT = T ? 293 is in K and V in ų. These variations were similar to those expected for a pressure increase, indicating that T and P effects are approximately inverse. The least-squares refinement with intensity data measured at 116 K shows that the volume of the SiO₄ tetrahedra does not change significantly, whereas the volume of the Mg octahedra slightly decreases. To adjust for the increased misfit between the tetrahedral and octahedral sheets, the tetrahedral rotation angle α changes from 0.58° to 1.38°, increasing the ditrigonalization of the silicate sheet. This deformation has implications on the H-bonds between the water molecule and the basal oxygen atoms. Furthermore, the highly anisotropic thermal ellipsoid of the H₂O oxygen indicates positional disorder, similar to the disorder observed at room temperature. The low-temperature results support the hypothesis that the disorder is static. It can be modeled with a splitting of the interlayer oxygen site with a statistical distribution of the H₂O molecules into two positions, 0.6 Å apart. The resulting shortest O_bas–O_W distances are 2.97 Å, with a significant shortening with respect to the value at room temperature. The low-temperature behavior of the H-bond system is consistent with that hypothesized at high pressure on the basis of the Raman spectra evolution with P.     

Thermal equation of state of natural tourmaline at high pressure and temperature

Synchrotron-based in situ angle-dispersive X-ray diffraction experiments were conducted on a natural uvite-dominated tourmaline sample by using an external-heating diamond anvil cell at simultaneously high pressures and temperatures up to 18 GPa and 723 K, respectively. The angle-dispersive X-ray diffraction data reveal no indication of a structural phase transition over the P–T range of the current experiment in this study. The pressure–volume–temperature data were fitted by the high-temperature Birch–Murnaghan equation of state. Isothermal bulk modulus of K ₀ = 96.6 (9) GPa, pressure derivative of the bulk modulus of \(K_{0}^{\prime } = 12.5 \;(4)\), thermal expansion coefficient of α ₀ = 4.39 (27) × 10^?5 K^?1 and temperature derivative of the bulk modulus (?K/?T) _P  = ?0.009 (6) GPa K^?1 were obtained. The axial thermoelastic properties were also obtained with K _a0 = 139 (2) GPa, \(K_{a0}^{\prime }\) = 11.5 (7) and α _a0 = 1.00 (11) × 10^?5 K^?1 for the a-axis, and K _c0 = 59 (1) GPa, \(K_{c0}^{\prime }\) = 11.4 (5) and α _c0 = 2.41 (24) × 10^?5 K^?1 for the c-axis. Both of axial compression and thermal expansion exhibit large anisotropic behavior. Thermoelastic parameters of tourmaline in this study were also compared with that of the other two ring silicates of beryl and cordierite.     

Sulfate Reduction and Sulfur Cycles at Two Seagrass Beds Inhabited by Cold Affinity <Emphasis Type="Italic">Zostera marina</Emphasis> and Warm Affinity <Emphasis Type="Italic">Halophila nipponica</Emphasis> in Temperate Coastal Waters

To evaluate the impact of invading seagrass on biogeochemical processes associated with sulfur cycles, we investigated the geochemical properties and sulfate reduction rates (SRRs) in sediments inhabited by invasive warm affinity Halophila nipponica and indigenous cold affinity Zostera marina. A more positive relationship between SRR and below-ground biomass (BGB) was observed at the H. nipponica bed (SRR = 0.6809 × BGB ? 4.3162, r ² = 0.9878, p = 0.0006) than at the Z. marina bed (SRR = 0.3470 × BGB ? 4.0341, r ² = 0.7082, p = 0.0357). These results suggested that SR was more stimulated by the dissolved organic carbon (DOC) exuded from the roots of H. nipponica than by the DOC released from the roots of Z. marina. Despite the enhanced SR in spring-summer, the relatively lower proportion (average, 20%) of acid-volatile sulfur (AVS) in total reduced sulfur and the strong correlation between total oxalate-extractable Fe (Fe_(oxal)) and chromium-reducible sulfur (CRS = 0.2321 × total Fe_(oxal) + 1.8180, r ² = 0.3344, p = 0.0076) in the sediments suggested the rapid re-oxidation of sulfide and precipitation of sulfide with Fe. The turnover rate of the AVS at the H. nipponica bed (0.13 day^?1) was 2.5 times lower than that at the Z. marina bed (0.33 day^?1). Together with lower AVS turnover, the stronger correlation of SRR to BGB in the H. nipponica bed suggests that the extension of H. nipponica resulting from the warming of seawater might provoke more sulfide accumulation in coastal sediments.     

Spatio-temporal variations of respirable particles at residential areas located in the vicinity of opencast coal projects,India: a case study

The objective of the study is to investigate spatio-temporal variations of PM₁₀, PM_2.5, and PM₁ concentrations at seven residential sites, located in the vicinity of opencast coal projects, Basundhara Garjanbahal Area (BGA), India. Meteorological parameters such as wind speed, wind direction, relative humidity, and temperature were collected simultaneously with PM concentrations. Mean concentrations of PM₁₀ in the range 215 ± 169–526 ± 412 μg m^?3, PM_2.5 in the range of 91 ± 79–297 ± 107 μg m^?3, PM₁ in the range of 68 ± 60–247 ± 84 μg m^?3 were obtained. Coarse fractions (PM_2.5–10) varied from 27 to 58% whereas fine fractions (PM_1–2.5 and PM₁) varied in the range of 51–73%. PM_2.5 concentration was 41–74% of PM₁₀ concentration, PM₁ concentration was 31–62% of PM₁₀ concentration, and PM₁ concentration was 73–83% of PM_2.5 concentration. Role of meteorology on PM concentrations was assessed using correlation analysis. Linear relationships were established among PM concentrations using least square regression analysis. With the aid of principal component analysis, two components were drawn out of eight variables, which represent more than 75% of variance. The results indicated that major sources of air pollutants (PM₁₀, PM_2.5, PM₁, CO, CO₂) at the residential sites are road dust raised by vehicular movement, spillage of coal generated during transportation, spontaneous combustion of coal, and biomass burning in village area.     

Impact of rainfall intensity on the hydrological performance of erosion control geotextiles

The impact of erosion control geotextiles on the surface runoff from slopes is quite variable and depends strongly on site-specific conditions (soil characteristics, slope morphology, climate, etc.), as has been shown in several earlier studies. In addition, little is known about the proportion of runoff reduction that is caused by the geotextile and the proportion that is caused by soil characteristics. To shed more light on this issue, an experiment was carried out to test the impact of 500 g m^?2 jute nets (J500) and 400 g m^?2; 700 g m^?2 coir nets (C400, C700) on the surface runoff from simulated rainfall of four different intensities (I ₁ = 18.7; I ₂ = 27.2; I ₃ = 53.6; I ₄ = 90.5 mm h^?1). Data on runoff volume, peak discharge and time to peak discharge were collected from 40 simulated rainfall events. An impermeable “no-soil” subgrade was used to examine the impact of the geotextile on runoff without any influence of soil. All tested geotextiles significantly reduced runoff (volume, peak discharge) at all rainfall intensities, with the exception of C400 and C700 during simulated rainfall intensity I ₄. J500 seemed to have the most effective runoff reduction performance at all rainfall intensities. In general, as the rainfall intensity increased, the effectiveness of the geotextiles decreased. Interesting behaviour was observed for J500 under simulated rainfall intensity I ₄—the effectiveness of the geotextile increased with the duration of the rainfall.     

Dynamics of carbon fluxes with responses to vegetation,meteorological and terrain factors in the south-eastern Tibetan Plateau

Tibetan Plateau (TP) is the highest and most extensive plateau in the world and has been known as the roof of the world, and it is sensitive to climate change. The researches of CO₂ fluxes (F _C) in the TP region play a significant role in understanding regional and global carbon balance and climate change. Eddy covariance flux measurements were conducted at three sites of south-eastern TP comprising Dali (DL, cropland ecosystem), LinZhi (LZ, alpine meadow ecosystem) and Wenjiang (WJ, cropland ecosystem); amongst those DL and LZ are located in plateau region, while WJ is in plain region. Dynamics of F _C and influences of vegetation, meteorological (air temperature, photosynthetically active radiation, soil temperature and soil water content) and terrain factors (altitude) were analysed on the basis of data taken during 2008. The results showed that, in the cool sub-season (March, April, October and December), carbon sink appeared even in December with fluxes of (?0.021 to ?0.05) mg CO₂ m^?2 s^?1 and carbon source only in October (0.03 ± 0.0048) mg CO₂ m^?2 s^?1 in DL and WJ site. In LZ site, carbon sink was observed in April: (?0.036 ± 0.0023) mg CO₂ m^?2 s^?1 and carbon sources in December and March (0.008–0.010 mg CO₂ m^?2 s^?1). In the hot sub-season (May–August), carbon source was observed only in May with (0.011 ± 0.0022), (0.104 ± 0.0029) and (0.036 ± 0.0017) fluxes in LZ, DL and WJ site, respectively, while carbon sinks with (?0.021 ± 0.0041), (?0.213 ± 0.0007) and (?0.110 ± 0.0015) mg CO₂ m^?2 s^?1 fluxes in LZ, DL, and WJ, respectively. Comparing with plain region (WJ), carbon sinks in plateau region (DL and LZ) lasted for a longer time, and the absorption sum was large and up to (–357.718 ± 0.0054) and (?371.111 ± 0.0039) g C m^?2 year^?1, respectively. The LZ site had the weakest carbon sink with (?178.547 ± 0.0070) g C m^?2 year^?1. Multivariate analysis of covariance showed that altitude (AL) as an independent factor explained 39.5 % of F _C (P < 0.026). F _C had a quadratic relationship with Normalized difference vegetation index (NDVI) (R ² ranges from 0.485 to 0.640 for three sites), an exponential relationship with soil temperature at 5-cm depth (ST ₅) at night time and a quadratic relationship with air temperature (T _a) at day time. Path analysis indicated that photosynthetically active radiation (PAR), sensible heat fluxes (H) and other factors all had direct or indirect effects on F _C in all of the three tested sites around the south-eastern TP.     

Dewatering Behaviour of a Uranium Ore Slurry Containing Clays

The main objective of this paper was to investigate the dewatering behaviour of a clayey uranium ore slurry. The slurry (containing 28% clay size) exhibited moderate water adsorption (w _l  = 83% and w _p  = 30%). Primarily composed of muscovite (46%) and quartz (30%), the clay minerals included illite (8%), chlorite (5%) and kaolinite (2%) alongside a CEC of 41 (cmol(+)/kg) with Ca²⁺ and Mg²⁺ as the dominant cations. Likewise, the high EC (17,600 μS/cm) and ionic strength (1.15 mol/L) indicated a flocculated microstructure due to the presence of SO₄ ^2? (22,600 mg/L) and Mg²⁺ (1340 mg/L) in the slurry water. Settling included sedimentation and consolidation at low initial solids condition (25–35%) whereas only consolidation was observed at high initial solids contents (40–50%). The average k reduced from 1.2 × 10^?6 m/s (initial s = 25%) to 5.3 × 10^?8 m/s (initial s = 50%) along with a void ratio reduction from 7.4 to 2.6. Due to thixotropic strength, volume compressibility during consolidation showed apparent pre-consolidation at low effective stress (0.3–2 kPa) with a reduction in void ratio from 2.6 to 2.5. The e _s was found to be 2.46 at σ′ = 2 kPa and was followed by a steeper slope with the void ratio reducing to 2.1 at σ′ = 31 kPa. Likewise, the hydraulic conductivity during consolidation decreased from 2.6 × 10^?9 m/s (at e = 2.6) to 2.0 × 10^?10 m/s (at e = 2.1).     

Toxinogenicity and cytotoxicity of <Emphasis Type="Italic">Alternaria,Aspergillus</Emphasis> and <Emphasis Type="Italic">Penicillium</Emphasis> moulds isolated from working environments

There is currently limited research available on the secondary metabolites of moulds in workplaces. The aim of this study was to determine the mould contamination in museums (N = 4), composting plants (N = 4) and tanneries (N = 4) and the secondary metabolite profiles of Alternaria, Aspergillus and Penicillium isolates from these workplaces. Alternaria, Aspergillus and Penicillium species were identified using the ITS1/2 sequence of the rDNA region. Mould metabolites were quantitatively analysed on standard laboratory medium and mineral medium containing materials specific to each workplace using liquid chromatography-mass spectrometry. We also examined the cytotoxicity of the moulds using MTT (3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide) assays. Air microbiological contamination analyses showed a number of microorganisms, ranging from 2.4 × 10³ CFU m^?3 (composting plants) to 6.8 × 10⁴ CFU m^?3 (tanneries). We identified high percentages of Alternaria, Aspergillus and Penicillium moulds (air 57–59%, surfaces 10–65%) in all workplaces. The following moulds were the most cytotoxic (>90%): Alternaria alternata, A. limoniasperae, Aspergillus flavus, Penicillium biourgeianum, P. commune and P. spinulosum. The same mould species isolated from different working environments exhibited varying toxigenic and cytotoxic properties. Modifying the culture medium to simulate environmental conditions most often resulted in the inhibition of secondary metabolite production. Moulds isolated from the working environments produced the following mycotoxins (ng g^?1): chanoclavines (0.28–204), cyclopiazonic acid (27.1–1045), fumigaclavines (0.33–10,640,000), meleagrin (0.57–13,393), roquefortins (0.01–16,660), rugulovasines (112–220), viridicatin (0.12–957), viridicatol (4.23–2753) and quinocitrinines (0.07–1104), which may have a negative impact on human health.     

Potential of <Emphasis Type="Italic">Micranthemum umbrosum</Emphasis> for phytofiltration of organic arsenic species from oxic water environment

Arsenic (As) is a toxic and carcinogenic metalloid that causes various hazards to human health. Phytofiltration is a more eco-friendly and green approach than chemoremediation, or other traditional technologies, for removing As from aquatic environments. Recently, Micranthemum umbrosum was shown as a promising candidate for phytofiltration of inorganic As species. This work examines the potential application of M. umbrosum to phytofiltration of organic As species, such as monomethylarsonic acid (MMAA, CH₅AsO₃) and dimethylarsinic acid (DMAA, C₂H₇AsO₂), from oxic water environments. M. umbrosum plants were grown in two test concentrations of MMAA and DMAA, or a control, in a hydroponic experiment. After seven days, leaves accumulated 90 ± 3.2 and 48 ± 1.6 µg As g^?1 (oven dry basis) from 1 µg As mL^?1 of water added from MMAA and DMAA, respectively. Bioconcentration factor values and translocation factor values were always greater than 1.0, indicating that M. umbrosum was a good As accumulator and that leaves accumulated significantly higher amounts of As than stems and roots. Analysis of macro- and micronutrient data showed that M. umbrosum had higher resistance to organic As treatments than the control. These results confirm the potential application of M. umbrosum for phytofiltration of organic As from contaminated oxic water environments.     

Thermoelastic properties of chromium oxide Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> (eskolaite) at high pressures and temperatures

A new synchrotron X-ray diffraction study of chromium oxide Cr₂O₃ (eskolaite) with the corundum-type structure has been carried out in a Kawai-type multi-anvil apparatus to pressure of 15 GPa and temperatures of 1873 K. Fitting the Birch–Murnaghan equation of state (EoS) with the present data up to 15 GPa yielded: bulk modulus (K _0,T0), 206 ± 4 GPa; its pressure derivative K′_0,T , 4.4 ± 0.8; (?K _0,T /?T) = ?0.037 ± 0.006 GPa K^?1; a = 2.98 ± 0.14 × 10^?5 K^?1 and b = 0.47 ± 0.28 × 10^?8 K^?2, where α _0,T  = a + bT is the volumetric thermal expansion coefficient. The thermal expansion of Cr₂O₃ was additionally measured at the high-temperature powder diffraction experiment at ambient pressure and α _0,T0 was determined to be 2.95 × 10^?5 K^?1. The results indicate that coefficient of the thermal expansion calculated from the EoS appeared to be high-precision because it is consistent with the data obtained at 1 atm. However, our results contradict α ₀ value suggested by Rigby et al. (Brit Ceram Trans J 45:137–148, 1946) widely used in many physical and geological databases. Fitting the Mie–Grüneisen–Debye EoS with the present ambient and high-pressure data yielded the following parameters: K _0,T0 = 205 ± 3 GPa, K′_0,T  = 4.0, Grüneisen parameter (γ ₀) = 1.42 ± 0.80, q = 1.82 ± 0.56. The thermoelastic parameters indicate that Cr₂O₃ undergoes near isotropic compression at room and high temperatures up to 15 GPa. Cr₂O₃ is shown to be stable in this pressure range and adopts the corundum-type structure. Using obtained thermoelastic parameters, we calculated the reaction boundary of knorringite formation from enstatite and eskolaite. The Clapeyron slope (with \({\text{d}}P/{\text{d}}T = - 0.014\) GPa/K) was found to be consistent with experimental data.     

The human impact on the transformation of juniper forest landscape in the western part of the Pamir-Alay range (Tajikistan)

Detailed analyses were conducted of human impact on juniper forest landscapes occurring within the Zarafshan Range (Pamir-Alay). Juniperus seravschanica and J. semiglobosa belong to forest-forming species in Central Asia. At present, juniper forests all over Tajikistan are seriously threatened as a result of excessive logging and cattle grazing. The aim of this paper is to present juniper forest transformation as a result of human activities as well as the diversity of soil properties in the organic and humus horizons in the altitudinal system of soil zonation. Three groups of phytocoenoses were distinguished: those with a dominant share of Juniperus seravschanica; those with a dominant share of J. semiglobosa; and mixed. Associations with Juniperus seravschanica and J. semiglobosa feature several variants of phytocoenoses with dominant species: Artemisia lehmanniana, A. dracunculus, Eremurus olgae, Festuca sulcata, Ligularia thomsonii, Stipa turkestanica, Thymus seravschanicus, and Ziziphora pamiroalaica. The collected soil samples differ in their granulometric composition. Gravelly cobble fractions >2 mm are dominant; the share of sandy particles <2 mm is much lower (about 10–20%). Fraction 0.5–0.05 attains 35% on average. The Corg content of the soil varied from 0.26 to 11.40% in the humus horizon (A) and from 4.3 to 25% in the organic (O). Similar relationships were reported in the case of Ntot concentration. A clear relationship can be observed between concentrations of Corg and Ntot. Soil pH varied, ranging from very low acidic (pH 5.5) to neutral (pH 8.5). The content of available P varied; high concentrations were noted in organic (O) (40.46–211 mg kg^?1) and mixed horizons (OA) (2.61–119 mg kg^?1). Maximum accumulations of Pavail (1739.6 mg kg^?1) and Ptot (9696 mg kg^?1) were observed at a site heavily affected by intense grazing. Concentrations of Mgavail varied from 116 to 964 mg kg^?1. Most of the analysed soil profiles lacked an organic horizon; only thin humus occurred.     

<Emphasis Type="Italic">P</Emphasis>–<Emphasis Type="Italic">V</Emphasis>–<Emphasis Type="Italic">T</Emphasis> equation of state of CaAl<Subscript>4</Subscript>Si<Subscript>2</Subscript>O<Subscript>11</Subscript> CAS phase

The thermoelastic parameters of the CAS phase (CaAl₄Si₂O₁₁) were examined by in situ high-pressure (up to 23.7 GPa) and high-temperature (up to 2,100 K) synchrotron X-ray diffraction, using a Kawai-type multi-anvil press. P–V data at room temperature fitted to a third-order Birch–Murnaghan equation of state (BM EOS) yielded: V _0,300 = 324.2 ± 0.2 Å³ and K _0,300 = 164 ± 6 GPa for K′ _0,300 = 6.2 ± 0.8. With K′ _0,300 fixed to 4.0, we obtained: V _0,300 = 324.0 ± 0.1 Å³ and K _0,300 = 180 ± 1 GPa. Fitting our P–V–T data with a modified high-temperature BM EOS, we obtained: V _0,300 = 324.2 ± 0.1 Å³, K _0,300 = 171 ± 5 GPa, K′ _0,300 = 5.1 ± 0.6 (?K _0,T /?T) _P  = ?0.023 ± 0.006 GPa K^?1, and α_0,T  = 3.09 ± 0.25 × 10^?5 K^?1. Using the equation of state parameters of the CAS phase determined in the present study, we calculated a density profile of a hypothetical continental crust that would contain ~10 vol% of CaAl₄Si₂O₁₁. Because of the higher density compared with the coexisting minerals, the CAS phase is expected to be a plunging agent for continental crust subducted in the transition zone. On the other hand, because of the lower density compared with lower mantle minerals, the CAS phase is expected to remain buoyant in the lowermost part of the transition zone.     

Potential of plant species for phytoremediation of metformin from solutions

Phytoremediation has been applied for treating an extensive range of environmental contaminants such as anti-diabetic drug metformin which is increasingly found as environmental contaminant. These contaminants are released to the environment via human and veterinary medicine and pharmaceutical industries. In this study, native plant capabilities for uptake of metformin from wastewater were investigated. Moreover, uptake rate of metformin was studied in two different concentrations of 20 and 50 mg l^?1 metformin solution by Amaranthus retroflexus, Ricinus communis, Brassica napus, Celosia cristata, Helianthus annuus and Phragmites australis. The results showed that after exposing to 20 mg l^?1 metformin solution 69.53 ± 2.25% of metformin was remediated by H. annuus plants. Also in 50 mg l^?1 metformin solution, H. annuus plants showed the most remediation potential (65.7 ± 1%). Metformin uptake is raised by B. napus and C. cristata plants along with increasing metformin concentration. There was no evidence of the presence of metformin in the roots and shoots of R. communis and C. cristata. The results also indicated that plants such as H. annuus can be a potential candidate for uptake of metformin from wastewater.     

Distribution of cadmium among multimedia in Lake Qinghai,China

Lake Qinghai in the Qinghai-Tibet plateau is the largest lake in China. This study firstly reported the geochemistry of Cd in the lake. Water samples were collected from Lake Qinghai (n = 69) and Buha River (n = 12), while sediment (n = 22) and topsoil (n = 45) samples were collected from the lake and around the lake area, respectively. In addition, pore water samples (n = 20) were separated from sediment samples. Water samples were analyzed for pH, K, Na, Ca, Mg, Cl, S, and Cd, while sediment and topsoil samples were analyzed for K, Na, Ca, Mg, Al, Fe, Mn, S, Sc, and Cd. The average concentration of Cd was 0.014 μg L^?1 in the water of Lake Qinghai and 0.007 μg L^?1 in the water of Buha River. However, the average concentration of Cd was 0.320 μg L^?1 in the sediment pore water, much higher than that in the lake water and river water. Cadmium concentration in the lake water might be mainly controlled by salinity, while it in the pore water might be mainly controlled by carbonate minerals. Cadmium concentration in the river water might be controlled by alkalinity and pH. The average concentration of Cd in the sediment was 0.284 mg kg^?1. The enrichment of Cd in the lake sediment was significantly higher than that in the topsoil around the lake. Anthropogenic atmospheric deposition of Cd did not led to the increase in dissolved Cd level in the lake water, but led to its enrichment in the lake sediment.