截面中部配置型钢的混凝土剪力墙抗震性能研究

本文通过试验研究了型钢混凝土(SRC)剪力墙的抗震性能,对16个试件进行了低周反复加载试验,得到了这些构件的延性比;研究了高宽比等参数对型钢混凝土剪力墙抗震性能的影响。在试验中,研究了在中部配置型钢的型钢混凝土剪力墙,结果表明这种新型的型钢混凝土剪力墙具有更好的抗震性能。在试验的基础上,本文建立了型钢混凝土剪力墙恢复力骨架曲线的数学模型,为分析高层结构的非线性地震反应分析提供了基础数据。     

Conceptual study of X-braced frames with different steel grades using cyclic half-scale tests

In this paper,an experimental and analytical study of two half-scale steel X-braced frames with equal nominal shear strength under cyclic loading is described.In these tests,all members except the braces are similar.The braces are made of various steel grades to monitor the effects of seismic excitation.Internal stiffeners are employed to limit the local buckling and increase the fracture life of the steel bracing.A heavy central core is introduced at the intersection of the braces to decrease their effective length.Recent seismic specifications are considered in the design of the X-braced frame members to verify their efficiency.The failure modes of the X-braced frames are also illustrated.It is observed that the energy dissipation capacity,ultimate load capacity and ductility of the system increase considerably by using lower grade steel and proposed detailing.Analytical modeling of the specimens using nonlinear finite element software supports the experimental findings.     

钢筋混凝土带暗支撑一字形截面短肢剪力墙抗震性能试验研究

对6个1／2缩尺的一字形截面短肢剪力墙构件进行了低周反复荷载下的抗震性能试验研究，墙肢截面高厚比分别为5．O、6．5、8．O，按普通与墙板中加设暗支撑两种情况进行设计。研究了带暗支撑一字形截面短肢剪力墙的承载力、刚度、延性、耗能、滞回特性等，并提出了抗震设计建议。     

带钢筋及钢骨暗支撑剪力墙抗震性能试验研究

选取剪力墙结构体系中较为薄弱的抗震构件“一”形剪力墙,进行了3个1／3缩尺的带钢筋、钢骨暗支撑剪力墙以及普通RC剪力墙构件的低周反复荷载试验,比较分析了它们的承载力、刚度、延性、滞回特性、耗能能力及破坏机制,并提出抗震设计建议。     

A new macromodel for the assessment of the seismic response of infilled RC frames

Numerous research studies have proved that numerical models aiming at an accurate evaluation of the seismic response of RC framed buildings cannot ignore the inelastic behaviour of infills and the interaction between infill and frame elements. To limit the high computational burden of refined non-linear finite element models, in the latest decades, many researchers have developed simplified infill models by means of single or multiple strut-elements. These models are low time-consuming and thus adequate for static and dynamic analyses of multi-storey structures. However, their simulation of the seismic response is sometimes unsatisfying, particularly in the presence of infill walls with regular or (particularly) irregular distributions of openings. This paper presents a new 2D plane macro-element, which provides a refined simulation of the non-linear cyclic response of infilled framed structures at the expense of a limited computational cost. The macro-element consists of an articulated quadrilateral panel, a single 1D diagonal link, and eight 2D links and is able to model the shear and flexural behaviour of the infill and the non-linear flexural/sliding interaction between infill and surrounding frame. The proposed macro-element has been implemented into the open source software OpenSees and used to simulate the response of single-storey, single-span RC infilled frame prototypes tested by other authors. The above prototypes are selected as made of different masonry units and characterised by full or open geometric configuration.     

钢管混凝土叠合柱边框内藏钢桁架核心筒抗震性能试验研究

为进一步改善混凝土核心简的抗震性能,本文提出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒.进行了2个1/6缩尺的核心筒模型在低周反复荷载下的抗震性能试验研究,1个为钢管混凝土叠合柱边框毛组合核心筒,1个为钢管混凝土叠合柱边框内藏钢桁架组合核心筒.通过试验,对比分析了2个核心简的承载力、延性、刚度及其衰减、滞回特性、耗能能力及破坏特征,给出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒的承载力计算模型,计算结果与实测值符合较好.研究表明,钢管混凝土叠合柱边框内藏钢桁架组合核心筒与钢管混凝土叠合柱边框组合核心筒相比,其抗震性能明显提高.     

Cyclic tests on steel and concrete‐filled tube frames with Slit Walls

Cyclic loading tests were performed on three one‐storey steel frames and four three‐storey concrete‐filled tube (CFT) moment frames reinforced with a new type of earthquake‐resisting element consisting of a steel plate shear wall with vertical slits. In this shear wall system, the steel plate segments between the slits behave as a series of flexural links, which provide fairly ductile response without the need for heavy stiffening of the wall. The steel shear walls and the moment frames behaved in a ductile manner up to more than 4% drift without abrupt strength degradation or loss of axial resistance. Results of these tests and complementary analysis provide a basis for an equivalent brace model to be employed in commercially available frame analysis programs. Test and analytical results suggest that the horizontal force is carried by the bolts in the middle portion of the wall–frame connection, while the vertical forces coupled with the moment in the connection are resisted by the bolts in the edge portion of the connection, for which the friction bolts in the connection should be designed. When sufficient transverse stiffening is provided, full plastic strength and non‐degrading hysteretic behaviour can be achieved for this new type of shear wall. Copyright © 2006 John Wiley & Sons, Ltd.     

模型化方法对钢筋混凝土框架地震反应的影响分析

结构非线性动力分析平台OpenSees具备丰富的材料、单元、模型化方法等分析选项和强大的求解功能。在OpenSees平台,对按我国规范设计的八度区二级和九度区一级典型钢筋混凝土框架结构进行了一系列罕遇烈度地震作用下的非线性动力反应分析。通过对分析结果的对比、判断,并结合各种模型化方法对结构地震反应的影响方式进行解释,从顶点侧移、层间侧移角、基底剪力、框架塑性铰分布等方面揭示了不同单元力学模型以及箍筋、板筋对结构整体、局部地震反应的影响规律。     

关于日本框架柱受剪承载力公式的讨论

通过对日本抗震设计规范中有关钢筋混凝土框架柱受剪承载力代表性公式的研究，凸现了由经验公式到基于桁架一拱模型建立的发展趋势。对各公式中所包括的影响框架柱受剪承载力的主要因素(如剪跨比、轴压比、配箍率、混凝土强度、纵筋率等)进行了深入讨论，并采用框架柱受剪承载力试验数据考察了各个公式的有效性。     

钢纤维高强混凝土框架边节点梁的曲率延性

进行了9个钢纤维高强混凝土框架边节点的抗震试验.通过测试钢纤维高强混凝土框架边节点梁端的荷载-变形滞回曲线和梁相关截面的横向变形,研究了钢纤维体积率、掺加范围和轴压比等因素对高强混凝土框架边节点梁截面曲率延性和滞回曲线的影响.结果表明,钢纤维能改善高强混凝土框架边节点梁截面延性,显著提高高强混凝土框架节点的抗震延性和耗能能力,对解决节点箍筋密集、改善施工条件具有明显效果.     

Seismic strengthening of RC columns using external steel cage

Steel caging technique is commonly used for the seismic strengthening of reinforced concrete (RC) columns of rectangular cross‐section. The steel cage consists of angle sections placed at corners and held together by battens at intervals along the height. In the present study, a rational design method is developed to proportion the steel cage considering its confinement effect on the column concrete. An experimental study was carried out to verify the effectiveness of the proposed design method and detailing of steel cage battens within potential plastic hinge regions. One ordinary RC column and two strengthened columns were investigated experimentally under constant axial compressive load and gradually increasing reversed cyclic lateral displacements. Both strengthened columns showed excellent behavior in terms of flexural strength, lateral stiffness, energy dissipation and ductility due to the external confinement of the column concrete. The proposed model for confinement effect due to steel cage reasonably predicted moment capacities of the strengthened sections, which matched with the observed experimental values. Copyright © 2009 John Wiley & Sons, Ltd.     

Seismic design factors for RC special moment resisting frames in Dubai, UAE

This study investigates the seismic design factors for three reinforced concrete (RC) framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to the response spectrum procedure defined in the 2009 International Building Code (IBC’09). Two ensembles of ground motion records with 10% and 2% probability of exceedance in 50 years (10/50 and 2/50, respectively) are used. The nonlinear dynamic responses to the earthquake records are computed using IDARC-2D. Key seismic design parameters are evaluated; namely, response modification factor (R), deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification factor for ductility (Rd) in addition to inelastic interstory drift. The evaluated seismic design factors are found to significantly depend on the considered ground motion (10/50 versus 2/50). Consequently, resolution to the controversy of Dubai seismicity is urged. The seismic design factors for the 2/50 records show an increase over their counterparts for the 10/50 records in the range of 200%-400%, except for the Ωo factor, which shows a mere 30% increase. Based on the observed trends, period-dependent R and Cd factors are recommended if consistent collapse probability (or collapse prevention performance) in moment frames with varying heights is to be expected.     

Subassemblage cyclic loading test of RC frame with buckling restrained braces in zigzag configuration

A new buckling restrained braced frame system is proposed for reinforced concrete building structures, which is featured by the zigzag configuration of the braces and the corresponding connection details. The connection details tend to separate the vertical and horizontal components of force imposed by the braces to be resisted by independent structural components to make the behavior of the connection easier to estimate and control. The performance of the brace connection details was evaluated through cyclic load testing on 1/2‐scale subassemblies of the proposed system, each of which consisted of a reinforced concrete part and a set of buckling restrained braces. To simplify the test control, the specimens were rotated 90° in the test and were loaded by two displacement controlled actuators. The test results show that the normal and the shear resistance of the gusset plate connection are essentially independent of each other. However, the rotation of the gusset plate with respect to the beam‐to‐column joint may result in nonuniform force distribution of the anchor bolts, the primary resistance for tensile force. At the same time, such rotation may also subject the concrete corbels, the primary shear resistance, to unfavorable tensile force. In addition, it is also confirmed that the buckling restrained braces performed well in the proposed system. Copyright © 2012 John Wiley & Sons, Ltd.     

Simulation of damage in RC frames with variable axial forces

The purpose of this paper is to describe how the methods and concepts of continuum damage and fracture mechanics can be applied to the modelling of the hysteretic behaviour of Reinforced Concrete (RC) frame members under variable axial loads. A frame member is considered as the assemblage of an elastic beam-column and two inelastic hinges, as in conventional nonlinear analysis of RC frames. As a result of the combination of damage mechanics and standard RC theory, a simplified model of damage is proposed and implemented as a finite element (FE). This new element can be used with any non-linear commercial FE program. The numerical simulation of several experiments, for which data were available in the literature, verifies the accuracy of the model. Copyright © 1999 John Wiley & Sons, Ltd.     

等幅侧向位移循环下柱混凝土纤维应变规律的试验研究

在已完成的包括16个构件的等位移循环加载钢筋混凝土柱的系列试验中，通过在其中3根柱的塑性铰区沿混凝土受力方向安设位移计，较准确测定了混凝土测试标距内的平均应变在一个加载循环内的变化规律及其随周数增长的变化规律；发现了单周最大压应变随周数的增长而持续增大，单周最大名义拉应变随周数增长而持续减小的重要现象；并与柱顶水平力-水平位移滞回规律实测结果相对应，结合截面受力特征对所得单周和多周应变变化规律的成因作了分析。     

Low‐seismic damage strategies for infilled RC frames: shake‐table tests

Unreinforced masonry (URM) infill panels are widely used as partitions in RC frames and typically considered as non‐structural elements in the design process. However, observations from recent major earthquakes have shown that under seismic excitation, the structural interaction between columns and infill walls can significantly alter the structural behaviour, thus causing catastrophic consequences. The purpose of this research was to propose and test an innovative low seismic damage detailing method, which isolates the infill panel from bounding columns with finite width vertical gaps during the infill panel construction phase and deploys steel wire connections in mortar layers anchored to columns. Taking into account the similitude requirements, a total of six one‐third scale, single‐storey single‐bay RC frames with different infill configurations and flexible connection details were carefully designed and tested on a shake‐table. Three real earthquake records were selected and scaled to ascending intensity levels and used as input signals. A series of thorough investigations including dynamic characteristics, hysteretic behaviour, failure mechanisms, out‐of‐plane vulnerabilities and the effect of different gap filling materials and load transfer mechanisms were rigorously studied. The experimental results indicate that the undesirable interaction between infill panels and bounding frame is significantly reduced using the proposed low seismic damage detailing concept. Direct shear failure of columns at an early stage is prevented, and structural redundancy at high levels of excitation can be provided. In general, the structural stability and integrity, and displacement ductility of infilled RC frames can remarkably be improved. Copyright © 2017 John Wiley & Sons, Ltd.     

反复荷载下型钢混凝土柱受扭损伤试验研究

为研究型钢混凝土柱在反复荷载下的受扭损伤,完成了11根型钢混凝土柱和1根钢筋混凝土柱复合受扭试验。通过试验观察了构件的受力过程和破坏特征,研究两种不同型钢混凝土柱的裂缝开展与分布规律。基于能量守恒定律,考察了柱截面配钢形式、扭弯比、轴压比、混凝土强度等级、配箍率以及配钢率对累积损伤的影响。研究结果表明:型钢混凝土柱的损伤演变分为3个阶段:弹性阶段、弹塑性阶段和破坏阶段;配钢形式、扭弯比和配箍率是影响型钢混凝土柱损伤程度的重要因素;配型钢,降低扭弯比和提高配箍率对于损伤指标分别最大降低了22.1%、14.3%和14.0%;损伤指标受轴压比、配钢率和混凝土强度等级影响程度较小。     

不同轴压比下内藏钢桁架混凝土组合剪力墙抗震研究

轴压比是影响剪力墙抗震性能的一个主要因素,直接决定其延性性能。本文对两组共六个高剪力墙1/3缩尺的试件模型进行了不同轴压比下的低周反复荷载试验,研究了轴压比对内藏钢桁架混凝土组合剪力墙抗震性能的影响,对比了各试件的承载力、刚度及其退化过程、延性、滞回特性及破坏特征。试验表明:随着轴压比的提高其试件的承载力提高但延性下降;不同轴压比下内藏钢桁架混凝土组合剪力墙均能明显提高钢筋混凝土剪力墙的抗震性能。     

Cyclic analysis and capacity prediction of concrete‐filled steel box columns

Concrete‐filled steel columns have been widely used in civil and architectural constructions throughout the world in recent years. This study is concerned with the cyclic elastoplastic analysis and capacity prediction of concrete‐filled steel columns having thick‐ and thin‐walled stiffened box‐shaped sections. An analytical procedure for determining the ultimate state of the concrete‐filled steel column is proposed based on the fiber analysis technique. Strength and ductility predictions are made by means of a new failure criterion. This is proposed based on the average failure strain of concrete and steel at critical regions. A recently developed monotonic stress–strain relation for confined concrete is modified so that it can be used in the analysis of thin‐ or thick‐walled section columns with stiffeners. A simple cyclic rule is introduced into this model in order to be used in cyclic analysis. Material non‐linearity of steel is represented by the modified two surface model developed at Nagoya University. The predictions are then compared with the existing experimental results and found to exhibit satisfactory agreement. Both small‐ and large‐scaled columns are considered in the comparisons. Copyright © 2001 John Wiley & Sons, Ltd.     

A Modified Cyclic Cracking Model for RC Structural Walls Behaviour Under Dynamic Excitation

In this paper, a simple cyclic cracking model incorporating crack dilatancy effect is proposed to model the behaviour of reinforced concrete structures under earthquake-like dynamic loading. This model has been implemented into a FE programme [LUSAS (2004) Luscas User Manual (version 12.3), FEA Ltd., London, England] to simulate reversed and cyclic loading. A shaking table test performed in Switzerland at the Swiss Federal Institute of Technology at Zurich (ETHZ) has been chosen for comparison. The test performed on the shaking table simulated a wall of a 3-storey building. The natural frequency and the crack pattern have been calculated and show reasonable agreement with the experimental results