Tracking the paleogene India-Arabia plate boundary

The location of the India-Arabia plate boundary prior to the formation of the Sheba ridge in the Gulf of Aden is a matter of debate. A seismic dataset crossing the Owen Fracture Zone, the Owen Basin, and the Oman Margin was acquired to track the past locations of the India-Arabia plate boundary. We highlight the composite age of the Owen Basin basement, made of Paleocene oceanic crust drilled on its eastern part, and composed of pre-Maastrichtian continental and oceanic crust overlaid by ophiolites emplaced in Early Paleocene on its western side. A major fossil transform fault system crossing the Owen Basin juxtaposed these two slivers of lithosphere of different ages, and controlled the uplift of marginal ridges along the Oman Margin. This transform system deactivated ∼40 Myrs ago, coeval with the onset of ultra-slow spreading at the Carlsberg Ridge. The transform boundary then jumped to the edge of the present-day Owen Ridge during the Late Eocene-Oligocene period, before seafloor spreading began at the Sheba Ridge. This migration of the plate boundary involved the transfer of a part of the Indian oceanic lithosphere formed at the Carlsberg Ridge to Arabia. This Late Eocene-Oligocene tectonic episode at the India-Arabia plate boundary is synchronous with a global plate reorganization event corresponding to geological events at the Zagros and Himalaya belts. The Owen Ridge uplifted later, in Late Miocene times, and is unrelated to any major migration of the India-Arabia boundary.     

Tectonic controls on carbonate sequence formation in an active strike–slip setting: Serranilla Basin, Northern Nicaragua Rise, Western Caribbean Sea

The Serranilla Basin is a flat-floored, semi-circular bathymetric depression (100×100 km; 1100–1200 m deep) at the western end of the northern Nicaragua Rise (NNR) in the Caribbean Sea. It is bound to the north by the Cayman Trough, an area of active sea floor spreading, and is part of the Northern Caribbean Plate Boundary Zone (NCPBZ). Single-channel, high-resolution seismic data were calibrated to rock dredges and ODP Site 1000 to define the geologic evolution and attempt to tie sequence formation within the basin to tectonic developments in this part of the Caribbean. Five seismic sequences were identified within the basin. The two lower sequences (A and B) are interpreted as neritic and shallow periplatform deposits which infill three distinct basins that make up the early to late Miocene Serranilla Basin. The three upper sequences (C through E) are interpreted as periplatform and pelagic deposits interspersed with turbidites, and in some areas, megabreccias. Faulting is prevalent in sequences A through C in the central basin, and becomes progressively younger toward the south, disrupting the seafloor in places and perhaps indicating renewed activity along the Pedro Fracture Zone. The timing of sequence boundary formation has been correlated to tectonic activity along the NCPBZ and closure of the Central American Seaway. Possible mechanisms of sequence boundary formation include tectonic tilting within the basin in conjunction with increased turbidite deposition, carbonate platform drowning and subsequent back-stepping associated with circulation changes resulting from tectonic ‘gateway' closure, and megabreccia deposition associated with bank demise. Although a direct genetic relationship is not proven, regional tectonic changes are considered more important than eustatic sea-level changes in controlling depositional sequence formation in the Serranilla Basin.     

Structural development and tectonic evolution of Gunsan Basin (Cretaceous–Tertiary) in the central Yellow Sea

This study analyzes the structural development of the Gunsan Basin in the central Yellow Sea, based on multi-channel seismic reflection profiles and exploratory well data. The basin comprises three depressions (the western, central, and eastern subbasins) filled with a thick (ca. 6000 m) Cretaceous to Paleogene nonmarine succession. It was initiated in the early Cretaceous due to intracontinental extension caused by oblique subduction of the Izanagi plate under the Eurasian plate and sinistral movement of the Tan-Lu fault. The basin appears to have undergone transtension in the late Cretaceous–Eocene, caused by dextral movement of the Tan-Lu and its branching faults. The transtension was accommodated by oblique intra-basinal normal faults and strike-slip (or oblique-slip) movement of a NE-trending bounding fault in the northern margin of the central subbasin. The entire basin was deformed (NE–SW contraction) in the Oligocene when tectonic inversion occurred, possibly due to the changes in strike-slip motion, from right- to left-lateral, of the Tan-Lu fault. During the early Miocene, extension resumed by reactivation of the pre-existing normal and transpressional faults. A combination of extension, uplift, and erosion resulted in differential preservation of the early Miocene succession. At the end of the early Miocene, extension ceased with mild contraction and then the basin thermally subsided with ensued rise in sea level.     

Miocene-to-recent structure and basinal architecture along the Central Range strike-slip fault zone, eastern offshore Trinidad

Previous GPS-based geodetic studies and onland paleoseismologic studies in Trinidad have shown that the 50-km-long, linear, onland segment of the Central Range fault zone (CRFZ) accommodates at least 60% of the total rate of right-lateral displacement (∼20 mm/yr) between the Caribbean and South American plates. 2D and 3D seismic reflection data from a 60-km-long and 30-km-wide swath of the eastern shelf of Trinidad (block 2AB) were used to map the eastern offshore extension of this potentially seismogenic and hazardous fault system and to document its deeper structure and tectonic controls on middle Miocene to recent clastic stratigraphy. Two unconformity surfaces and seafloor were mapped using 3D seismic data to generate isochron maps and to illustrate the close control of the CRFZ and associated secondary faults on small, clastic basins formed along its anastomosing strands and the east-west-striking North Darien Ridge fault zone (NDRFZ) that exhibits a down-to-the-north normal throw. Mapped surfaces include: 1) the middle Miocene angular unconformity, a prominent, regional unconformity surface separating underlying thrust-deformed rocks from a much less deformed overlying section; this regional unconformity is well studied from onland outcrops in Trinidad and in other offshore areas around Trinidad; 2) a Late Neogene angular unconformity developed locally within block 2AB that is not recognized in Trinidad; and 3) the seafloor of the eastern Trinidad shelf which exhibits linear scarps for both the CRFZ and the east-west-striking North Darien Ridge fault zone. Clastic sedimentary fill patterns identified on these isochron maps indicate a combined effect of strike-slip and reverse faulting (i.e., tectonic transpression) produced by active right-lateral shear on the CRFZ, which is consistent with the obliquity of the strike of the fault to the interplate slip vector known from GPS studies in onland Trinidad. The NDRFZ and a sub-parallel and linear family of east-west-striking faults with normal and possibly transtensional motions also contributed to the creation of accommodation space within localized, post-middle Miocene clastic depocenters south of the CRFZ.     

Interaction between trench retreat and Anatolian escape as recorded by neogene basins in the northern Aegean Sea

The evolution of the North Aegean Sea is studied through the development of three deep basins: the North Aegean Trough, the North Skyros Basin and the Ikaria Basin. Bathymetric data, a 2D seismic dataset and the well-investigated stratigraphic records of the onshore deep basins of northern Greece and Western Turkey were used to make structural and seismic stratigraphic interpretations. The study area shows two sharp unconformities that correspond to the Eocene-Oligocene transition and the Miocene-Pliocene shift. These discontinuities were used as marker horizons for a more detailed structural and seismic stratigraphic interpretation resulting in the identification of several seismic units. A general seismic signature chart was established using onshore basin stratigraphy and well data, which was then used to constrain the ages of the different seismic units. The main features observed in the basins are interpreted as: 1) trans-tensional growth patterns in Pliocene and Quaternary sediments that combine NE–SW trending and steeply dipping fault zones that likely correspond to strike-slip corridors and E-W/WNW-ESE trending normal faults, 2) regional erosional truncations of Miocene sediments, likely related to the Messinian Salinity Crisis (MSC), 3) thick delta-turbidite deposits of Neogene age. Only the North Aegean Trough shows evidence of earlier development and polyphase deformation through inversion structures, and additional seismic units. Extension processes in the Aegean region have been driven by the Hellenic slab rollback since the middle Eocene. The widespread development of Neogene basins at the whole Aegean scale attests to a major tectonic change due to an acceleration of the trench retreat in the middle Miocene. The present study shows that the Neogene basins of the North Aegean Sea developed in dextral transtension with the northward migration of the associated NE-SW trending strike-slip faults. At regional scale, this tectonic pattern indicates that the westward escape of Anatolia started to interact with the trench retreat in the middle Miocene, around 10 Myr before the arrival of the North Anatolian Fault in the North Aegean Sea.     

台西盆地乌丘屿凹陷新生代构造演化特征

以区域地质、地震等资料为基础,系统研究了台西盆地乌丘屿凹陷构造特征及其形成演化。台西盆地的发育受欧亚板块、印度板块、太平洋板块和菲律宾海板块4大板块共同作用的影响。中生代晚期,台西盆地区域应力场从挤压转为松弛,地壳拉张减薄。新生代初期拉张形成裂谷,乌丘屿凹陷是在此背景下发育而成东断西超的半地堑式陆缘断陷。乌丘屿凹陷的构造发育与演化过程,可分为4个阶段,分别为中生代晚期的裂前阶段、古新世至渐新世的断陷阶段、中新世的坳陷阶段和上新世至第四纪的区域沉降阶段。     

Regional structure and tectonic history of the obliquely colliding Columbus foreland basin, offshore Trinidad and Venezuela

Cenozoic eastward migration of the Caribbean plate relative to the South American plate is recorded by an 1100-km-long Venezuela-Trinidad foreland basin which is oldest in western Venezuela (65-55 Ma), of intermediate age in eastern Venezuela (34-20 Ma) and youngest beneath the shelf and slope area of eastern offshore Trinidad (submarine Columbus basin, 15.0 Ma-Recent). In this study of the regional structure, fault families, and chronology of faulting and tectonic events affecting the hydrocarbon-rich Columbus foreland basin of eastern offshore Trinidad, we have integrated approximately 775 km of deep-penetration 2D seismic lines acquired by the 2004 Broadband Ocean-Land Investigations of Venezuela and the Antilles arc Region (BOLIVAR) survey, 325 km of vintage GULFREX seismic data collected by Gulf Oil Company in 1974, and published industry well data that can be tied to some of the seismic reflection lines. Top Cretaceous depth structure maps in the Columbus basin made from integration of all available seismic and well data define for the first time the elongate subsurface geometry of the 11-15 km thick and highly asymmetrical middle Miocene-Recent depocenter of the Columbus basin. The main depocenter located 150-200 km east of Trinidad and now the object of deepwater hydrocarbon exploration is completely filled by shelf and deepwater sediments derived mainly from the Orinoco delta. The submarine Darien ridge exhibits moderate (20-140 m) seafloor relief, forms the steep (12°-24°), northern structural boundary of the Columbus basin, and is known from industry wells to be composed of 0.5-4.5 km thick, folded and thrust-imbricated, hydrocarbon-bearing section of Cretaceous and early Tertiary limestones and clastic rocks. The eastern and southern boundaries of the basin are formed by the gently (1.7°-4.5°), northward-dipping Cretaceous-Paleogene passive margin of South America that is in turn underlain by Precambrian rocks of the Guyana shield.Interpretation of seismic sections tied to wells reveals the following fault chronology: (1) middle Miocene thrusting along the Darien ridge related to highly oblique convergence between the Caribbean plate and the passive margin of northern South America; continuing thrusting and transpression in an oblique foreland basin setting through the early Pleistocene; (2) early Pliocene-recent low-angle normal faults along the top of the Cretaceous passive margin; these faults were triggered by oversteepening related to formation of the downdip, structurally and bathymetrically deeper, and more seaward Columbus basin; large transfer faults with dominantly strike-slip displacements connect gravity-driven normal faults that cluster near the modern shelf-slope break and trend in the downslope direction; to the south no normal faults are present because the top Cretaceous horizon has not been oversteepened as it is adjacent to the foreland basin; (3) early Pliocene-Recent strike-slip faults parallel the trend of the Darien ridge and accommodate present-day plate motions.     

南沙海区万安盆地构造演化与成因机制

本文基于地震、钻井和区域地质资料,运用回剥法和平衡剖面技术定量研究了万安盆地的构造沉降和伸展程度,重建盆地的构造演化史并探讨其成因机制。模拟结果表明,万安盆地构造沉降曲线为多段式,其南北部构造沉降差异明显,且沉降中心逐渐向南发展的趋势。晚始新世-渐新世（37.8~23.03 Ma BP）盆地中、北部快速沉降,存在两个沉降中心;早中新世（23.03~16.0 Ma BP）盆地南部也发生快速沉降,整个盆地存在3个沉降中心;中中新世（约16.0~11.63 Ma BP）沉降作用减弱,盆地进入裂后热沉降期。万安盆地的伸展和形成演化呈现北早南晚的特征,与南海海底扩张密切相关,同时受控于万安断裂带交替地右旋-左旋走滑作用,是伸展和走滑双重作用的结果。盆地的构造演化过程可细分为4个阶段:初始裂谷期、主要裂谷期、走滑改造期和裂后加速沉降期。     

Gravity modeling of the Muertos Trough and tectonic implications (north-eastern Caribbean)

The Muertos Trough in the northeast Caribbean has been interpreted as a subduction zone from seismicity, leading to infer a possible reversal subduction polarity. However, the distribution of the seismicity is very diffuse and makes definition of the plate geometry difficult. In addition, the compressive deformational features observed in the upper crust and sandbox kinematic modeling do not necessarily suggest a subduction process. We tested the hypothesized subduction of the Caribbean plate’s interior beneath the eastern Greater Antilles island arc using gravity modeling. Gravity models simulating a subduction process yield a regional mass deficit beneath the island arc independently of the geometry and depth of the subducted slab used in the models. This mass deficit results from sinking of the less dense Caribbean slab beneath the lithospheric mantle replacing denser mantle materials and suggests that there is not a subducted Caribbean plateau beneath the island arc. The geologically more realistic gravity model which would explain the N–S shortening observed in the upper crust requires an overthrusted Caribbean slab extending at least 60 km northward from the deformation front, a progressive increase in the thrusting angle from 8° to 30° reaching a maximum depth of 22 km beneath the insular slope. This new tectonic model for the Muertos Margin, defined as a retroarc thrusting, will help to assess the seismic and tsunami hazard in the region. The use of gravity modeling has provided targets for future wide-angle seismic surveys in the Muertos Margin.     

Morpho-tectonic evolution of the ?anakkale Basin (NW Anatolia): evidence for a recent tectonic inversion from transpression to transtension

Onshore and offshore seismic and geologic-morphologic evidence from the wider region of the ?anakkale Basin indicates that this area has been widely exposed to transpressional tectonism, which already commenced in the Pliocene. During this transpressional tectonism, the Gelibolu Fault and the Anafartalar Shear Zone on the Gelibolu Peninsula, as well as the Bozcaada-Biga Shear Zone on the Biga Peninsula were activated. As a consequence, the northern part of the Gelibolu Peninsula, and a broad zone between Bozcaada Island and the Karaburun Peninsula were uplifted to form the northern and southern boundaries of the ?anakkale Basin, respectively. This remained a low-elevation intermontane basin between these two highlands. The original morphology of the ?anakkale Basin may have developed as a coastal and shelf section of the large extensional Marmara Sea Basin at the end of the Late Miocene. This tectonic phase was followed in the Pliocene by the transpressional tectonism of the North Anatolian Fault Zone, which destroyed the initial morphology and formed the present V-shaped basin. The activity of the Gelibolu Fault and the Anafartalar Shear Zone along the northern boundary of the ?anakkale Basin ended in the late Pleistocene with the initiation of the northern segment of the North Anatolian Fault Zone. The tectonism along the northern boundary of the ?anakkale Basin thus shifted from a transpressional to a transtensional regime. Seismic data indicate that the Bozcaada-Biga Shear Zone continues to be active to the present day.     

Cenozoic tectonics on the Galicia margin,northwest Spain

Neogene tectonic activity (Betic Orogeny) along the southern plate boundary of Iberia, as it converged with Africa and the Alboran Plate was inserted between them, propagated along Iberia's west side as far north as Galicia, northwest Spain. As the activity propagated northward, it reactivated structures formed during the Paleozoic (Hercynian), the Early Cretaceous opening of the northern North Atlantic and the Bay of Biscay, and the Paleogene Pyrenean Orogeny when Iberia collided with Eurasia. Recent earthquakes indicate that this tectonism is still active today as far north as northwest Spain.     

Oligocene to Lower Pliocene deposits of the Norwegian continental shelf,Norwegian Sea,Svalbard, Denmark and their relation to the uplift of Fennoscandia: A synthesis

This study provides the results of the first integrated study of Oligocene–Pliocene basins around Norway.Within the study area, three main depocentres have been identified where sandy sediments accumulated throughout the Oligocene to Early Pliocene period. The depocentre in the Norwegian–Danish Basin received sediments from the southern Scandes Mountains, with a general progradation from north to south during the studied period. The depocentre in the basinal areas of the UK and Norwegian sectors of the North Sea north of 58°N received sediments from the Scotland–Shetland area. Because of the sedimentary infilling there was a gradual shallowing of the northern North Sea basin in the Oligocene and Miocene. A smaller depocentre is identified offshore northern Nordland between Ranafjorden (approximately 66°N) and Vesterålen (approximately 68°N) where the northern Scandes Mountains were the source of the Oligocene to Early Pliocene sediments. In other local depocentres along the west coast of Norway, sandy sedimentation occurred in only parts of the period. Shifts in local depocentres are indicative of changes in the paleogeography in the source areas.In the Barents Sea and south to approximately 68°N, the Oligocene to Early Pliocene section is eroded except for distal fine-grained and biogenic deposits along the western margin and on the oceanic crust. This margin was undergoing deformation in a strike-slip regime until the Eocene–Oligocene transition. The Early Oligocene sediments dated in the Vestbakken Volcanic Province and the Forlandssundet Basin represent the termination of this strike-slip regime.The change in the plate tectonic regime at the Eocene–Oligocene transition affected mainly the northern part of the study area, and was followed by a quiet tectonic period until the Middle Miocene, when large compressional dome and basin structures were formed in the Norwegian Sea. The Middle Miocene event is correlated with a relative fall in sea level in the main depocentres in the North Sea, formation of a large delta in the Viking Graben (Frigg area) and uplift of the North and South Scandes domes. In the Norwegian–Danish Basin, the Sorgenfrei-Tornquist Zone was reactivated in the Early Miocene, possibly causing a shift in the deltaic progradation towards the east. A Late Pliocene relative rise in sea level resulted in low sedimentation rates in the main depositional areas until the onset of glaciations at about 2.7 Ma when the Scandes Mountains were strongly eroded and became a major source of sediments for the Norwegian shelf, whilst the Frigg delta prograded farther to the northeast.     

Evolution of the Grenada and Tobago basins and implications for arc migration

The tectonic mechanisms controlling how volcanic arcs migrate through space and geologic time within dynamic subduction environments is a fundamental tectonic process that remains poorly understood. This paper presents an integrated stratigraphic and tectonic evolution of Late Cretaceous to Recent volcanic arcs and associated basins in the southeastern Caribbean Sea using seismic reflection data, wide-angle seismic refraction data, well data, and onland geologic data. We propose a new tectonic model for the opening of the Grenada and Tobago basins and the 50-250-km eastward jump of arc volcanism from the Late Cretaceous Aves Ridge to the Miocene to Recent Lesser Antilles arc in the southeast Caribbean based on the mapping of three seismic megasequences. The striking similarity of the half-graben structure of the Grenada and Tobago basins that flank the Lesser Antilles arc, their similar smooth basement character, their similar deep-marine seismic facies, and their similar Paleogene sediment thickness mapped on a regional grid of seismic data suggest that the two basins formed as a single, saucer-shaped, oceanic crust Paleogene forearc basin adjacent to the now dormant Aves Ridge. This single forearc basin continued to extend and widen through flexural subsidence during the early to middle Eocene probably because of slow rollback of the subducting Atlantic oceanic slab. Rollback may have been accelerated by oblique collision of the southern Aves Ridge and southern Lesser Antilles arc with the South American continent. Uplift and growth of the southern Lesser Antilles arc divided the Grenada and Tobago basins by early to middle Miocene time. Inversion of normal faults and uplift effects along both edges of the Lesser Antilles arc are most pronounced in its southern zone of arc collision with the South American continent. The late Miocene to Recent depositional histories of the Grenada and Tobago basins are distinct because of isolation of the Grenada basin by growth and uplift of the Neogene Lesser Antilles volcanic ridge.     

东海陆架盆地中生界构造样式及其动力学成因探讨

构造样式为盆内各类构造组合的几何形态表达,反映了盆地所处应力场性质变化与构造演化过程。本文基于近5年来针对东海陆架盆地所取得的地震资料解释成果,并综合盆地构造演化特征及其地球动力学背景,对盆地内中生界构造样式进行了系统的分类与总结,详细划分为5类构造样式:伸展构造样式、挤压构造样式、走滑构造样式、反转构造样式和底辟构造样式,并进一步细化为12种构造组合。同时,对东海陆架盆地内西部坳陷、中部低隆起、东部坳陷3个构造单元内的中生界构造样式发育情况分别进行了总结,各类构造样式自西至东具有各异的展布特征。综合盆内中生界构造样式几何学特点与展布特征可见,由于伊佐奈歧板块的俯冲、碰撞作用,区内处于挤压构造环境,进而形成了挤压背斜、断背斜、正反转等构造组合;大洋板块的后退翻卷及板块碰撞、俯冲的远程效应下,区内构造环境以伸展作用为主,形成了一系列NNE向裂陷盆地,发育了丰富的伸展构造组合;走滑-拉分构造的发育较好体现了构造环境的转变,地震剖面上见有花状断裂发育;岩浆底辟构造多发育于拉张环境下,与断裂展布息息相关,多沿NE-NNE向断裂展布。此外,新生代多期构造运动是影响中生界构造样式发育展布的重要因素。     

Reef exploration in the East Sengkang Basin,Sulawesi, Indonesia

Reconnaissance seismic shot in 1971/72 showed a number of well defined seismic anomalies within the East Sengkang Basin which were interpreted as buried reefs. Subsequent fieldwork revealed that Upper Miocene reefs outcropped along the southern margin of the basin. A drilling programme in 1975 and 1976 proved the presence of shallow, gas-bearing, Upper Miocene reefs in the northern part of the basin. Seismic acquisition and drilling during 1981 confirmed the economic significance of these discoveries, with four separate accumulations containing about 750 × 10⁹ cubic feet of dry gas in place at an average depth of 700 m. Kampung Baru is the largest field and contains over half the total, both reservoir quality and gas deliverability are excellent. Deposition in the East Sengkang Basin probably started during the Early Miocene. A sequence of Lower Miocene mudstones and limestones unconformably overlies acoustic basement which consists of Eocene volcanics. During the tectonically active Middle Miocene, deposition was interrupted by two periods of deformation and erosion. Carbonate deposition became established in the Late Miocene with widespread development of platform limestones throughout the East Sengkang Basin. Thick pinnacle reef complexes developed in the areas where reef growth could keep pace with the relative rise in sea level. Most reef growth ceased at the end of the Miocene and subsequent renewed clastic sedimentation covered the irregular limestone surface. Late Pliocene regression culminated in the Holocene with erosion. The Walanae fault zone, part of a major regional sinistral strike-slip system, separates the East and West Sengkang Basins. Both normal and reverse faulting are inferred from seismic data and post Late Pliocene reverse faulting is seen in outcrop.     

The basins of Sundaland (SE Asia): Evolution and boundary conditions

Most of the basins developed in the continental core of SE Asia (Sundaland) evolved since the Late Cretaceous in a manner that may be correlated to the conditions of the subduction in the Sunda Trench. By the end of Mesozoic times Sundaland was an elevated area composed of granite and metamorphic basement on the rims; which suffered collapse and incipient extension, whereas the central part was stable. This promontory was surrounded by a large subduction zone, except in the north and was a free boundary in the Early Cenozoic. Starting from the Palaeogene and following fractures initiated during the India Eurasia collision, rifting began along large faults (mostly N–S and NNW–SSE strike-slip), which crosscut the whole region. The basins remained in a continental fluvio-lacustrine or shallow marine environment for a long time and some are marked by extremely stretched crust (Phu Khanh, Natuna, N. Makassar) or even reached the ocean floor spreading stage (Celebes, Flores). Western Sundaland was a combination of basin opening and strike-slip transpressional deformation. The configuration suggests a free boundary particularly to the east (trench pull associated with the Proto-South China Sea subduction; Java–Sulawesi trench subduction rollback). In the Early Miocene, Australian blocks reached the Sunda subduction zone and imposed local shortening in the south and southeast, whereas the western part was free from compression after the Indian continent had moved away to the north. This suggests an important coupling of the Sunda Plate with the Indo-Australian Plate both to SE and NW, possibly further west rollback had ceased in the Java–Sumatra subduction zone, and compressional stress was being transferred northwards across the plate boundary. The internal compression is expressed to the south by shortening which is transmitted as far as the Malay basin. In the Late Miocene, most of the Sunda Plate was under compression, except the tectonically isolated Andaman Sea and the Damar basins. In the Pliocene, collision north of Australia propagated toward the north and west causing subduction reversal and compression in the short-lived Damar Basin. Docking of the Philippine Plate confined the eastern side of Sundaland and created local compression and uplift such as in NW Borneo, Palawan and Taiwan. Transpressional deformation created extensive folding, strike-slip faulting and uplift of the Central Basin and Arakan Yoma in Myanmar. Minor inversion affected many Thailand rift basins. All the other basins record subsidence. The uplift is responsible for gravity tectonics where thick sediments were accumulated (Sarawak, NE Luconia, Bangladesh wedge).     

Geometry and structure of the Vitiaz Trench Lineament (SW Pacific)

Swath bathymetric, sonar imagery and seismic reflection data collected during the SOPACMAPS cruise Leg 3 over segments of the Vitiaz Trench Lineament and adjacent areas provide new insights on the geometry and the stuctural evolution of this seismically inactive lineament. The Vitiaz Trench Lineament, although largely unknown, is one of the most important tectonic feature in the SW Pacific because it separates the Cretaceous crust of the Pacific Plate to the north from the Cenozoic lithosphere of the North Fiji and Lau Basins to the south. The lineament is considered to be the convergent plate boundary between the Pacific and Australian Plates during midde to late Tertiary time when the Vitiaz Arc was a continuous east-facing are from the Tonga to the Solomon Islands before the development of the North Fiji and Lau Basins. Progressive reversal and cessation of subduction from west to east in the Late Miocene-Lower Plioene have been also proposed. However, precise structures and age of initiation and cessation of deformation along the Vitiaz Trench Lineament are unknown.The lineament consists of the Vitiaz Trench and three discontinuous and elongated troughs (Alexa, Rotuma and Horne Troughs) which connect the Vitiaz Trench to the northern end of the Tonga Trench. Our survey of the Alexa and Rotuma Troughs reveals that the lineament is composed of a series of WNW-ESE and ENE-WSW trending segments in front of large volcanic massifs belonging to the Melanesian Border Plateau, a WNW trending volcanic belt of seamounts and ridges on Pacific crust. The Plateau and Pacific plate lying immediately north of the lineament have been affected by intense normal faulting, collapse, and volcanism as evidenced by a series of tilted blocks, grabens, horsts and ridges trending N 120° to N100° and N60°–70°. This tectonism includes several normal faulting episodes, the latest being very recent and possibly still active. The trend of the fault scarps and volcanic ridges parallels the different segments of the Vitiaz Trench Lineament, suggesting that tectonics and volcanism are related to crustal motion along the lineament.Although the superficial observed features are mainly extensional, they are interpreted as the result of shortening along the Vitiaz Trench Lineament. The fabric north of the lineament would result from subduction-induced normal faulting on the outer wall of the trench and the zig-zag geometry of the Vitiaz Trench Lineament might be due to collision of large volcanic edifices of the Melanesian Border Plateau with the trench, provoking trench segmentation along left-lateral ENE-WSW trending transform zones. The newly acquired bathymetric and seismic data suggest that crustal motion (tectonism associated with volcanism) continued up to recent times along the Vitiaz Trench Lineament and was active during the development of the North Fiji Basin.     

Structural evolution of Malay Basin,its link to Sunda Block tectonics

The Malay Basin is located offshore West Malaysia in the South China Sea, within north central region of 1st order Sunda Block. The basin developed partly as a result of tectonic collisions and strike-slip shear of the Southeast Asia continental slabs, as the Indian Plate collided into Eurasia, and subsequent extrusion of lithospheric blocks towards Indochina. The Sunda Block epicontinental earliest rift margins were manifested by the Palaeogene W–E rift valleys, which formed during NW–SE sinistral shear of the region. Later Eocene NW–SE dextral shear of (2nd order) Indochina Block against East Malaya Block rifted open a 3rd order Malay Basin. Developed within it is a series of 4th order N–S en-echelon ridges and grabens. The grabens and some ridges, sequentially, host W–E trending 5th order folds of later compressional episodes. The Malay Basin Ridge and Graben Model explains the multi-phased structural deformation which started with, the a) Pre-Rift Palaeo/Mesozoic crystalline/metamorphic Basement, b) Synrift phase during Paleogene, c) Fast Subsidence from Late Oligocene to Middle Miocene, d) Compressional inversion of first Sunda fold during Late Miocene, and e) Basin Sag during Plio-Pleistocene with mild compressional episodes. The subsequent Mio-Pliocene folding history of Malay Basin is connected to the collision of Sunda Block against subducting Indian–Australian Plate. This Neogene Sunda tectonics, to some degree after the cessation of South China Sea spreading, is due to the diachronous collision along the 1st order plate margins between SE Asia and Australia.     

Seismic stratigraphy and structural analysis of the northern East China Sea Shelf Basin interpreted from multi-channel seismic reflection data and cross-section restoration

Analysis of multi-channel seismic data from the northern East China Sea Shelf Basin (ECSSB) reveals three sub-basins (Socotra, Domi, and Jeju basins), separated by structural highs (Hupijiao Rise) and faulted basement blocks. These sub-basins show a typical rift-basin development: faulted basement and syn-rift and post-rift sedimentation separated by unconformities. Four regional unconformities, including the top of acoustic basement, have been identified and mapped from multi-channel seismic data. Faults in the acoustic basement are generally trending NE, parallel to the regional structural trend of the area. The depths of the acoustic basement range from less than 1000 m in the northwestern part of the Domi Basin to more than 4500 m in the Socotra Basin and 5500 m in the Jeju Basin. The total sediment thicknesses range from less than 500 m to about 1500 m in the northwest where the acoustic basement is shallow and reach about more than 5500 m in the south.Interpretation of seismic reflection data and reconstruction of three depth-converted seismic profiles reveal that the northern ECSSB experienced two phases of rifting, followed by regional subsidence. The initial rifting in the Late Cretaceous was driven by the NW-SE crustal stretching of the Eurasian Plate, caused by the subduction of the Pacific Plate beneath the Eurasian Plate. Extension was the greatest during the early phase of basin formation; estimated rates of extension during the initial rifting are 2%, 6.5%, and 3.5% in the Domi, Jeju, and Socotra basins, respectively. A regional uplift terminated the rifting in the Late Eocene-Early Oligocene. Rifting and extension, although mild, resumed in the Early Oligocene; while fluvio-lacustrine deposition continued to prevail. The estimated rates of extension during the second phase of rifting are 0.7%, 0.8%, and 0.5% in the Domi, Jeju, and Socotra basins, respectively. A second phase of uplift in the Early Miocene terminated the rifting, marking the transition to the post-rift phase of regional subsidence. Regional subsidence dominated the study area between the Early Miocene and the Late Miocene. An inversion in the Late Miocene interrupted the post-rift subsidence, resulting in an extensive thrust-fold belt in the eastern part of the area. Uplift and subsequent erosion were followed by regional subsidence.     

Structure of the South Powell Ridge (NE Antarctic Peninsula): new clues for changing tectonic regimes near the Scotia/Antarctica Plate boundary

The structure of the South Powell Ridge (SPR), separating the Late Cenozoic ocean-floored Powell Basin and the Mesozoic Weddell Sea domain, is revealed by multichannel seismic data. The SPR appears as a basement high, bounded northward by transtensional faults and by normal and major reverse faults to the south. These margin features seem to be linked to the Powell Basin southern strike-slip margin and to the Jane Arc paleotrench, respectively. We suggest the ridge evolved from the Antarctic Peninsula passive margin to become the deformational front of the Scotia/Antarctica Plate boundary, later being welded to the Antarctic Plate.