Morphodynamic evolution and stratal architecture of translating tidal point bars: Inferences from the northern Venice Lagoon (Italy)

The widespread distribution of tidal creeks and channels that undertake meandering behaviour in modern coasts contrasts with their limited documentation in the fossil record, where point‐bar elements arising from the interaction between a mix of both fluvial and tidal currents are mainly documented. The sedimentary products of tidal channel‐bend evolution are relatively poorly known, and few studies have focused previously on specific facies models for tidal point bars present in modern settings. This study improves understanding of tidal channel meander bends through a multi‐disciplinary approach that combines analyses of historical aerial photographs, measurements of in‐channel flow velocity, high‐resolution facies analyses of sedimentary cores and three‐dimensional architectural modelling. The studied channel bend (12 to 15 m wide and 2 to 3 m deep) drains a salt marsh area located in the north‐eastern sector of the microtidal Venice Lagoon, Italy. Historical photographs show that, during the past 77 years, the bend has translated seaward ca 15 m. Results show that the channel bend formed on a non‐vegetated mud flat that was progressively colonized by vegetation. Seaward translation occurred under aggradational conditions, with an overall migration rate of 0·2 to 0·3 m year⁻¹, and was promoted by the occurrence of cohesive, poorly erodible outer bank deposits. Ebb currents are dominant, and translation of the channel bend promotes erosion and deposition along the landward and seaward side of the bar, respectively. Tidal currents show a clear asymmetry in terms of velocity distribution, and their offset pattern provides a peculiar grain‐size distribution within the bar. During the flood stage, sand sedimentation occurs in the upper part of the bar, where the maximum flow velocity occurs. During the ebb stage, the bar experiences the secondary helical flow that accumulates sand at the toe of the bar. Lateral stacking of flood and ebb deposits has caused the formation of localized coarsening‐upward and fining‐upward sedimentary packages, respectively.     

Tidal currents and wind waves controlling sediment distribution in a subtidal point bar of the Venice Lagoon (Italy)

The present study aims to improve current understanding of the sedimentation of subtidal point bars, analyzing interaction between tidal currents and waves in shaping a submerged meander bend of the microtidal Venice Lagoon (Italy), and it is based on coupling of sedimentological studies, geophysical analyses and numerical modelling. The Venice Lagoon is characterized by an average depth of about 1·5 m over subtidal platforms and a mean tidal range of about 1·0 m. The morphodynamic evolution of the lagoon is strongly affected by intense seasonal windstorms, which promote the formation of wind waves triggering sediment resuspension and bottom erosion. The study channel is 70 to 100 m wide, it has a radius of curvature of about 260 m and cuts through a permanently submerged subtidal platform. Water depth ranges from 1·0 to 5·0 m below mean sea level on the subtidal platform and channel thalweg, respectively. Different from classical architectural models, the study point‐bar beds do not show sigmoidal geometries, but consist of horizontally‐bedded deposits abruptly overlying clinostratified beds. Sedimentation in the study bar is hypothesized to stem from the interaction between the in‐channel secondary helical flow, as for most meander bends, and wave winnowing of the subaqueous overbank areas. Laterally accreting point‐bar deposits point out that the curvature‐induced helical flow redistributed sediment from the channel thalweg to the bar top and contributed to the development of the ‘classical’ fining‐upward grain size trend. The marked truncation surface, separating clinostratified bar deposits from overlying horizontally‐bedded platform sediments is interpreted here as due to bar top wave‐winnowing, which also possibly promoted bank collapses. In the proposed model, sediments remobilized from bar top and subaqueous overbank areas were transported into the channel, forming peculiar ‘apron‐like’ accumulations, where sand accumulated through avalanching processes and mud settled down from suspension.     

Plan‐form evolution of ancient meandering rivers reconstructed from longitudinal outcrop sections

The mode of channel‐bend transformation (i.e. expansion, translation, rotation or a combination thereof) has a direct bearing on the dimensions, shape, bedding architecture and connectivity of point‐bar sandstone bodies within a fluvial meander belt, but is generally difficult to recognize in vertical outcrops. This study demonstrates how the bend transformation mode and relative rate of channel‐floor aggradation can be deciphered from longitudinal outcrop sections aligned parallel to the meander‐belt axis, as a crucial methodological aid to the reconstruction of ancient fluvial systems and the development of outcrop analogue models for fluvial petroleum reservoirs. The study focuses on single‐storey and multi‐storey fluvial meander‐belt sandstone bodies in the Palaeogene piggyback Boyabat Basin of north‐central Turkey. The sandstone bodies are several hundred metres wide, 5 to 40 m thick and encased in muddy floodplain deposits. The individual channel‐belt storeys are 5 to 9 m thick and their transverse sections show lateral‐accretion bed packages representing point bars. Point bars in longitudinal sections are recognizable as broad mounds whose parts with downstream‐inclined, subhorizontal and upstream‐inclined bedding represent, respectively, the bar downstream, central and upstream parts. The inter‐bar channel thalweg is recognizable as the transition zone between adjacent point‐bar bedsets with opposing dip directions into or out of the outcrop section. The diverging or converging adjacent thalweg trajectories, or a trajectory migrating in up‐valley direction, indicate point‐bar broadening and hence channel‐bend expansion. A concurrent down‐valley migration of adjacent trajectories indicates channel‐bend translation. Bend rotation is recognizable from the replacement of a depositional riffle by an erosional pool zone or vice versa along the thalweg trajectory. The steepness of the thalweg trajectory reflects the relative rate of channel‐floor aggradation. This study discusses further how the late‐stage foreland tectonics, with its alternating pulses of uplift and subsidence and a progressive narrowing of the basin, has forced aggradation of fluvial channels and caused vertical stacking of meander belts.     

Three‐dimensional to two‐dimensional cross‐strata transition in the lower Pleistocene Catanzaro tidal strait transgressive succession (southern Italy)

Sandstone tidal cross‐strata are the predominant sedimentary feature of strait‐fill stratigraphic successions. However, although widely described in numerous studies, tidal strait‐fill two‐dimensional and three‐dimensional cross‐strata have rarely been reported to occur in discrete intervals which are laterally adjacent or vertically stacked, and the meaning of this stratigraphic architecture has not yet been fully investigated. Understanding of the processes responsible for changes in the internal features of modern and ancient tidal bedforms is essential in order to predict lateral and vertical heterogeneities in analogous reservoir strata. This facies‐based study aims to interpret the three‐dimensional to two‐dimensional cross‐strata transition observed in the lower Pleistocene mixed siliciclastic/bioclastic sandstone filling the Catanzaro Strait, in southern Italy, during a continuous phase of tectonically driven marine transgression. Tidal cross‐strata disappear in the uppermost interval of the studied succession, where mudstone strata prevail. This stratigraphic trend is interpreted as the evidence of an important change in the tidal strait hydrodynamics due to a phase of relative sea‐level rise. At the beginning of the transgression, three‐dimensional tidal dunes migrated throughout the ca 3 to 4 km wide and ca 30 km long, WNW–ESE‐oriented Catanzaro Strait, due to strong tidal currents amplified through the seaway and flowing in semi‐diurnal phase opposition. As the intermediate phase of transgression enlarged the seaway width, the tidal current strength decreased as tidal water exchange occurred over a larger cross‐sectional area. The progressive reduction of the bed shear stress modified three‐dimensional tidal dunes into an extensive two‐dimensional bedform field. At the end of the transgression, the further widening of the Catanzaro Strait into a ca 10 to 12 km wide marine passageway changed the tidally dominated strait into a non‐tidal open shelf. The results of this research suggest the presence of a ‘critical cross‐sectional area’ in the narrowest strait‐centre zone which controls the activation and deactivation of tidal current amplification along a marine seaway.     

The role of tidal,wave and river currents in the evolution of mixed‐energy deltas: Example from the Lajas Formation (Argentina)

Many modern deltas show complex morphologies and architectures related to the interplay of river, wave and tidal currents. However, methods for extracting the signature of the individual processes from the stratigraphic architecture are poorly developed. Through an analysis of facies, palaeocurrents and stratigraphic stacking patterns in the Jurassic Lajas Formation, this paper: (i) separates the signals of wave, tide and river currents; (ii) illustrates the result of strong tidal reworking in the distal reaches of deltaic systems; and (iii) discusses the implications of this reworking for the evolution of mixed‐energy systems and their reservoir heterogeneities. The Lajas Formation, a sand‐rich, shallow‐marine, mixed‐energy deltaic system in the Neuquén Basin of Argentina, previously defined as a tide‐dominated system, presents an exceptional example of process variability at different scales. Tidal signals are predominantly located in the delta front, the subaqueous platform and the distributary channel deposits. Tidal currents vigorously reworked the delta front during transgressions, producing intensely cross‐stratified, sheet‐like, sandstone units. In the subaqueous platform, described for the first time in an ancient outcrop example, the tidal reworking was confined within subtidal channels. The intensive tidal reworking in the distal reaches of the regressive delta front could not have been predicted from knowledge of the coeval proximal reaches of the regressive delta front. The wave signals occur mainly in the shelf or shoreface deposits. The fluvial signals increase in abundance proximally but are always mixed with the other processes. The Lajas system is an unusual clean‐water (i.e. very little mud is present in the system), sand‐rich deltaic system, very different from the majority of mud‐rich, modern tide‐influenced examples. The sand‐rich character is a combination of source proximity, syndepositional tectonic activity and strong tidal‐current reworking, which produced amalgamated sandstone bodies in the delta‐front area, and a final stratigraphic record very different from the simple coarsening‐upward trends of river‐dominated and wave‐dominated delta fronts.     

Influence of fluvial‐tidal interactions on the nature of cross‐stratified packages in a deltaic setting: examples from the Barakar Coal Measure (Permian), Satpura Gondwana Basin,central India

Nine different types of cross‐stratified packages from the coal‐bearing, deltaic succession of the Barakar Formation (Permian) of the Satpura Gondwana Basin, central India, are described. The deposits are characterized by periodic mudstone drapes, reactivation surfaces including all other features suggestive of deposition from periodically unsteady, tidally‐influenced flows. The inferred flow patterns varied from purely bidirectional to pulsating unidirectional. The different types of cross‐stratified packages are interpreted to have resulted from superimposition of ebb‐oriented, steady, unidirectional fluvial currents of variable strength on the tidal flow in a deltaic setting. The study helps to distinguish cross‐strata that may develop in settings where fluvial and tidal currents interact. Copyright © 2004 John Wiley & Sons, Ltd.     

Anatomy of an Upper Triassic continental to marginal‐marine system: the mixed siliciclastic–carbonate Travenanzes Formation (Dolomites,Northern Italy)

The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply.     

Testate amoebae as estuarine water‐level indicators: modern distribution and the development of a transfer function from a freshwater tidal marsh (Scheldt estuary,Belgium)

Little is known about the century‐scale response of water levels in inland estuaries to sea‐level change and human modifications to estuarine morphology. This study explored the ability of using testate amoebae (Protozoa, Rhizopoda) from sediments of a freshwater tidal marsh as indicators of water level in an inland estuary. The hypothesis was that modern testate amoeba assemblages change with surface elevation (approximately the duration of tidal flooding) within a freshwater tidal marsh. Variation in testate amoeba assemblages in relation to multiple environmental variables and sediment characteristics was studied through redundancy analysis. This demonstrated that a significant part of the variation in modern testate amoeba assemblages could be explained by flooding frequency, surface elevation, organic content and particle size of the soil. Transfer functions, partial least squares and weighted average regressions were made to show that testate amoebae can be used for reconstruction of water level (with an accuracy of 0.05 Normalized Elevation). A preliminary test of application of the transfer function to palaeo testate amoeba assemblages showed promising results. Testate amoebae from a freshwater tidal marsh provide a potentially powerful new tool for estuarine water‐level reconstructions. Copyright © 2011 John Wiley & Sons, Ltd.     

Late Quaternary multiple incised valley systems: An unusually well‐preserved stratigraphic record of two interglacial valley‐fill successions from the Arno Plain (northern Tuscany,Italy)

Un‐fragmented stratigraphic records of late Quaternary multiple incised valley systems are rarely preserved in the subsurface of alluvial‐delta plains due to older valley reoccupation. The identification of a well‐preserved incised valley fill succession beneath the southern interfluve of the Last Glacial Maximum Arno palaeovalley (northern Italy) represents an exceptional opportunity to examine in detail evolutionary trends of a Mediterranean system over multiple glacial–interglacial cycles. Through sedimentological and quantitative meiofauna (benthic foraminifera and ostracods) analyses of two reference cores (80 m and 100 m long) and stratigraphic correlations, a mid‐Pleistocene palaeovalley, 5 km wide and 50 m deep, was reconstructed. Whereas valley filling is chronologically constrained to the penultimate interglacial (Marine Isotope Stage 7) by four electron spin resonance ages on bivalve shells (Cerastoderma glaucum), its incision is tentatively correlated with the Marine Isotope Stage 8 sea‐level fall. Above basal fluvial‐channel gravels, the incised valley fill is formed by a mud‐prone succession, up to 44 m thick, formed by a lower floodplain unit and an upper unit with brackish meiofauna that reflects the development of a wave‐dominated estuary. Subtle meiofauna changes towards less confined conditions record two marine flooding episodes, chronologically linked to the internal Marine Isotope Stage 7 climate‐eustatic variability. After the maximum transgressive phase, recorded by coastal sands, the interfluves were flooded around 200 ka (latest Marine Isotope Stage 7). The subsequent shift in river incision patterns, possibly driven by neotectonic activity, prevented valley reoccupation guiding the northward formation of the Last Glacial Maximum palaeovalley. The applied multivariate approach allowed the sedimentological characterization of the Marine Isotope Stage 7 and Marine Isotope Stage 1 palaeovalley fills, including shape, size and facies architecture, which revealed a consistent river‐coastal system response over two non‐consecutive glacial–interglacial cycles (Marine Isotope Stages 8 to 7 and Marine Isotope Stages 2 to 1). The recurring stacking pattern of facies documents a predominant control exerted on stratigraphy by Milankovitch and sub‐Milankovitch glacio‐eustatic oscillations across the late Quaternary period.     

An earth systems approach to understanding the tectonic and cultural landscapes of linked marine embayments: Avon‐Heathcote Estuary (Ihutai) and Lake Ellesmere (Waihora), New Zealand

An earth systems study of the Avon‐Heathcote Estuary (Ihutai), New Zealand, shows that tectonic activity has a marked direct and indirect control upon its geomorphology and human settlement in the area. We discuss the Late Holocene history of the embayment in relation to large earthquakes and their after‐effects. Of particular note is the rapid fluvial transfer of sand to the coast causing dune formation and a more delayed pulse of coarser sediment causing channel avulsion of the Waimakariri River. While dune system development seems to occur soon after tectonic activity, river channel avulsion, spit/barrier formation and ongoing geomorphological changes may well relate to periods of tectonic activity that occurred 100–200 years previously. The interaction between these two sediment delivery systems causes significant, and often rapid, changes to coastal geomorphology and ecosystems that have serious implications for human populations living at or near the coast. We show a more region‐wide picture of the direct and indirect effects of tectonic activity, by comparing two embayments that represent coastal points of entry at opposite ends of the Waimakariri River floodplain: the Avon‐Heathcote Estuary (Ihutai) and Lake Ellesmere (Waihora). Copyright © 2005 John Wiley & Sons, Ltd.     

Late‐glacial to Holocene depositional architecture of the Ombrone palaeovalley system (Southern Tuscany,Italy): Sea‐level,climate and local control in valley‐fill variability

The Ombrone palaeovalley was incised during the last glacial sea‐level fall and was infilled during the subsequent Late‐glacial to Holocene transgression. A detailed sedimentological and stratigraphic study of two cores along the palaeovalley axis led to reconstruction of the post‐Last Glacial Maximum valley‐fill history. Stratigraphic correlations show remarkable similarity in the Late‐glacial to early‐Holocene succession, but discrepancy in the Holocene portion of the valley fill. Above the palaeovalley floor, about 60 m below sea‐level, Late‐glacial sedimentation is recorded by an unusually thick alluvial succession dated back to ca 18 cal kyr bp . The Holocene onset was followed by the retrogradational shift from alluvial to coastal facies. In seaward core OM1, the transition from inner to outer estuarine environments marks the maximum deepening of the system. By comparison, in landward core OM2, the emplacement of estuarine conditions was interrupted by renewed continental sedimentation. Swamp to lacustrine facies, stratigraphically equivalent to the fully estuarine facies of core OM1, represent the proximal expression of the maximum flooding zone. This succession reflects location in a confined segment of the valley, just landward of the confluence with a tributary valley. It is likely that sudden sediment input from the tributary produced a topographic threshold, damming the main valley course and isolating its landward segment from the sea. The seaward portion of the Ombrone palaeovalley presents the typical estuarine backfilling succession of allogenically controlled incised valleys. In contrast, in the landward portion of the system, local dynamics completely overwhelmed the sea‐level signal, following marine ingression. This study highlights the complexity of palaeovalley systems, where local morphologies, changes in catchment areas, drainage systems and tributary valleys may produce facies patterns significantly different from the general stratigraphic organization depicted by traditional sequence‐stratigraphic models.     

Mesozoic to Cenozoic tectono‐metamorphic history of the South Pamir–Hindu Kush (Chitral,NW Pakistan): Insights from phase equilibria modelling,and garnet–monazite petrochronology

The Karakoram–Hindu Kush–Pamir and adjacent Tibetan plateau belt comprise a series of Gondwana‐derived crustal fragments that successively accreted to the Eurasian margin in the Mesozoic as the result of the progressive Tethys ocean closure. These domains provide unique insights into the thermal and structural history of the Mesozoic to Cenozoic Eurasian plate margin, which are critical to inform the initial boundary conditions (e.g. crustal thickness, structure and thermo‐mechanical properties) for the subsequent development of the large and hot Tibetan–Himalaya orogen, and the associated crustal deformation processes. Using a combination of microstructural analyses, thermobarometry modelling and U–Th–Pb monazite and Lu–Hf garnet geochronology, the study reappraises the metamorphic history of exposed mid‐crustal metapelites in the Chitral region of the South Pamir–Hindu Kush (NW Pakistan). This study also demonstrates that trace elements in monazite (especially Y and Dy), combined with thermodynamical modelling and Lu–Hf garnet dating, provides a powerful integrated toolbox for constraining long‐lived and polyphased tectono‐metamorphic histories in all their spatial and temporal complexity. Rocks from the Chitral region were progressively deformed and metamorphosed at sub‐ and supra‐solidus conditions through at least four distinct episodes from the Mesozoic to the Cenozoic. Rocks were first metamorphosed at ~400–500°C and ~0.3 GPa in the Late Triassic–Early Jurassic (210–185 Ma), likely in response to the accretion of the Karakoram during the Cimmerian orogeny. Pressure and temperature subsequently increased by ~0.3 GPa and 100°C in the Early‐ to Mid Cretaceous (140–80 Ma), coinciding with the intrusion of calcalkaline granitic plutons across the Karakoram and Pamir regions. This event is interpreted as the record of crustal thickening and the development of a proto‐plateau within the Eurasian margin due to a long‐lived episode of slab flattening in an Andean‐type margin. Peak metamorphism was reached in the Late Eocene–Early Oligocene (40–30 Ma) at conditions of 580–600°C and ~0.6 GPa and 700–750°C and 0.7–0.8 GPa for the investigated staurolite schists and sillimanite migmatites respectively. This crustal heating up to moderate anatexis likely resulted in the underthrusting of the Indian plate after a NeoTethyan slab‐break off or to the Tethyan Himalaya–Lhasa microcontinent collision and subsequent oceanic slab flattening. Near‐isothermal decompression/exhumation followed in the Late Oligocene (28–23 Ma) as marked by a pressure decrease in excess of ~0.1 GPa. This event was coeval with the intrusion of the 24 Ma Garam Chasma leucogranite. This rapid exhumation is interpreted to be related to the reactivation of the South Pamir–Karakoram suture zone during the ongoing collision with India. The findings of this study confirm that significant crustal shortening and thickening of the south Eurasian margin occurred during the Mesozoic in an accretionary‐type tectonic setting through successive episodes of terrane accretions and probably slab flattening, transiently increasing the coupling at the plate interface. Moreover, they indicate that the south Eurasian margin was already hot and thickened prior to Cenozoic collision with India, which has important implications for orogen‐scale strain‐accommodation mechanisms.