Efficient flow and transport simulations in reconstructed 3D pore geometries

Upscaling pore-scale processes into macroscopic quantities such as hydrodynamic dispersion is still not a straightforward matter for porous media with complex pore space geometries. Recently it has become possible to obtain very realistic 3D geometries for the pore system of real rocks using either numerical reconstruction or micro-CT measurements. In this work, we present a finite element–finite volume simulation method for modeling single-phase fluid flow and solute transport in experimentally obtained 3D pore geometries. Algebraic multigrid techniques and parallelization allow us to solve the Stokes and advection–diffusion equations on large meshes with several millions of elements. We apply this method in a proof-of-concept study of a digitized Fontainebleau sandstone sample. We use the calculated velocity to simulate pore-scale solute transport and diffusion. From this, we are able to calculate the a priori emergent macroscopic hydrodynamic dispersion coefficient of the porous medium for a given molecular diffusion D_m of the solute species. By performing this calculation at a range of flow rates, we can correctly predict all of the observed flow regimes from diffusion dominated to convection dominated.     

Micro-computed tomography pore-scale study of flow in porous media: Effect of voxel resolution

A fundamental understanding of flow in porous media at the pore-scale is necessary to be able to upscale average displacement processes from core to reservoir scale. The study of fluid flow in porous media at the pore-scale consists of two key procedures: Imaging - reconstruction of three-dimensional (3D) pore space images; and modelling such as with single and two-phase flow simulations with Lattice-Boltzmann (LB) or Pore-Network (PN) Modelling. Here we analyse pore-scale results to predict petrophysical properties such as porosity, single-phase permeability and multi-phase properties at different length scales. The fundamental issue is to understand the image resolution dependency of transport properties, in order to up-scale the flow physics from pore to core scale. In this work, we use a high resolution micro-computed tomography (micro-CT) scanner to image and reconstruct three dimensional pore-scale images of five sandstones (Bentheimer, Berea, Clashach, Doddington and Stainton) and five complex carbonates (Ketton, Estaillades, Middle Eastern sample 3, Middle Eastern sample 5 and Indiana Limestone 1) at four different voxel resolutions (4.4 µm, 6.2 µm, 8.3 µm and 10.2 µm), scanning the same physical field of view. Implementing three phase segmentation (macro-pore phase, intermediate phase and grain phase) on pore-scale images helps to understand the importance of connected macro-porosity in the fluid flow for the samples studied. We then compute the petrophysical properties for all the samples using PN and LB simulations in order to study the influence of voxel resolution on petrophysical properties. We then introduce a numerical coarsening scheme which is used to coarsen a high voxel resolution image (4.4 µm) to lower resolutions (6.2 µm, 8.3 µm and 10.2 µm) and study the impact of coarsening data on macroscopic and multi-phase properties. Numerical coarsening of high resolution data is found to be superior to using a lower resolution scan because it avoids the problem of partial volume effects and reduces the scaling effect by preserving the pore-space properties influencing the transport properties. This is evidently compared in this study by predicting several pore network properties such as number of pores and throats, average pore and throat radius and coordination number for both scan based analysis and numerical coarsened data.     

Micro-scale experimental investigation of the effect of flow rate on trapping in sandstone and carbonate rock samples

We present the results of a pore-scale experimental study of residual trapping in consolidated sandstone and carbonate rock samples under confining stress. We investigate how the changes in wetting phase flow rate impacts pore-scale distribution of fluids during imbibition in natural, water-wet porous media. We systematically study pore-scale trapping of the nonwetting phase as well as size and distribution of its disconnected globules. Seven sets of drainage-imbibition experiments were performed with brine and oil as the wetting and nonwetting phases, respectively. We utilized a two-phase miniature core-flooding apparatus integrated with an X-ray microtomography system to examine pore-scale fluid distributions in small Bentheimer sandstone (D = 4.9 mm and L = 13 mm) and Gambier limestone (D = 4.4 mm and L = 75 mm) core samples. The results show that with increase in capillary number, the residual oil saturation at the end of the imbibition reduces from 0.46 to 0.20 in Bemtheimer sandstone and from 0.46 to 0.28 in Gambier limestone. We use pore-scale displacement mechanisms, in-situ wettability characteristics, and pore size distribution information to explain the observed capillary desaturation trends. The reduction was believed to be caused by alteration of the order in which pore-scale displacements took place during imbibition. Furthermore, increase in capillary number produced significantly different pore-scale fluid distributions during imbibition. We explored the pore fluid occupancies and studied size and distribution of the trapped oil clusters during different imbibition experiments. The results clearly show that as the capillary number increases, imbibition produces smaller trapped oil globules. In other words, the volume of individual trapped oil globules decreased at higher brine flow rates. Finally, we observed that the pore space in the limestone sample was considerably altered through matrix dissolution at extremely high brine flow rates. This increased the sample porosity from 44% to 62% and permeability from 7.3 D to 80 D. Imbibition in the altered pore space produced lower residual oil saturation (from 0.28 to 0.22) and significantly different distribution of trapped oil globules.     

Direct simulations of two-phase flow on micro-CT images of porous media and upscaling of pore-scale forces

Pore-scale forces have a significant effect on the macroscopic behaviour of multiphase flow through porous media. This paper studies the effect of these forces using a new volume-of-fluid based finite volume method developed for simulating two-phase flow directly on micro-CT images of porous media. An analytical analysis of the relationship between the pore-scale forces and the Darcy-scale pressure drops is presented. We use this analysis to propose unambiguous definitions of Darcy-scale viscous pressure drops as the rate of energy dissipation per unit flow rate of each phase, and then use them to obtain the relative permeability curves. We show that this definition is consistent with conventional laboratory/field measurements by comparing our predictions with experimental relative permeability. We present single and two-phase flow simulations for primary oil injection followed by water injection on a sandpack and a Berea sandstone. The two-phase flow simulations are presented at different capillary numbers which cover the transition from capillary fingering at low capillary numbers to a more viscous fingering displacement pattern at higher capillary numbers, and the effect of capillary number on the relative permeability curves is investigated. Overall, this paper presents a new finite volume-based methodology for the detailed analysis of two-phase flow directly on micro-CT images of porous media and upscaling of the results to the Darcy scale.     

A transport phase diagram for pore-level correlated porous media

Transport in porous media is often characterized by the advection–dispersion equation, with the dispersion coefficient as the most important parameter that links the hydrodynamics to the transport processes. Morphological properties of any porous medium, such as pore size distribution, network topology, and correlation length control transport. In this study we explore the impact of correlation length on transport regime using pore-network modelling. Earlier direct simulation studies of dispersion in carbonate and sandstone rocks showed larger dispersion compared to granular homogenous sandpacks. However, in these studies, isolation of the impact of correlation length on transport regime was not possible due to the fundamentally different pore morphologies and pore-size distributions. Against this limitation, we simulate advection–dispersion transport for a wide range of Péclet numbers in unstructured irregular networks with “different” correlation lengths but “identical” pore size distributions and pore morphologies. Our simulation results show an increase in the magnitudes of the estimated dispersion coefficients in correlated networks compared to uncorrelated ones in the advection-controlled regime. The range of the Péclet numbers which dictate mixed advection–diffusion regime considerably reduces in the correlated networks. The findings emphasize the critical role of correlation length which is depicted in a conceptual transport phase diagram and the importance of accounting for the micro-scale correlation lengths into predictive stochastic pore-scale modelling.     

Intercomparison of 3D pore-scale flow and solute transport simulation methods

Multiple numerical approaches have been developed to simulate porous media fluid flow and solute transport at the pore scale. These include 1) methods that explicitly model the three-dimensional geometry of pore spaces and 2) methods that conceptualize the pore space as a topologically consistent set of stylized pore bodies and pore throats. In previous work we validated a model of the first type, using computational fluid dynamics (CFD) codes employing a standard finite volume method (FVM), against magnetic resonance velocimetry (MRV) measurements of pore-scale velocities. Here we expand that validation to include additional models of the first type based on the lattice Boltzmann method (LBM) and smoothed particle hydrodynamics (SPH), as well as a model of the second type, a pore-network model (PNM). The PNM approach used in the current study was recently improved and demonstrated to accurately simulate solute transport in a two-dimensional experiment. While the PNM approach is computationally much less demanding than direct numerical simulation methods, the effect of conceptualizing complex three-dimensional pore geometries on solute transport in the manner of PNMs has not been fully determined. We apply all four approaches (FVM-based CFD, LBM, SPH and PNM) to simulate pore-scale velocity distributions and (for capable codes) nonreactive solute transport, and intercompare the model results. Comparisons are drawn both in terms of macroscopic variables (e.g., permeability, solute breakthrough curves) and microscopic variables (e.g., local velocities and concentrations). Generally good agreement was achieved among the various approaches, but some differences were observed depending on the model context. The intercomparison work was challenging because of variable capabilities of the codes, and inspired some code enhancements to allow consistent comparison of flow and transport simulations across the full suite of methods. This study provides support for confidence in a variety of pore-scale modeling methods and motivates further development and application of pore-scale simulation methods.     

Direct numerical simulation of pore-scale flow in a bead pack: Comparison with magnetic resonance imaging observations

A significant body of current research is aimed at developing methods for numerical simulation of flow and transport in porous media that explicitly resolve complex pore and solid geometries, and at utilizing such models to study the relationships between fundamental pore-scale processes and macroscopic manifestations at larger (i.e., Darcy) scales. A number of different numerical methods for pore-scale simulation have been developed, and have been extensively tested and validated for simplified geometries. However, validation of pore-scale simulations of fluid velocity for complex, three-dimensional (3D) pore geometries that are representative of natural porous media is challenging due to our limited ability to measure pore-scale velocity in such systems. Recent advances in magnetic resonance imaging (MRI) offer the opportunity to measure not only the pore geometry, but also local fluid velocities under steady-state flow conditions in 3D and with high spatial resolution. In this paper, we present a 3D velocity field measured at sub-pore resolution (tens of micrometers) over a centimeter-scale 3D domain using MRI methods. We have utilized the measured pore geometry to perform 3D simulations of Navier–Stokes flow over the same domain using direct numerical simulation techniques. We present a comparison of the numerical simulation results with the measured velocity field. It is shown that the numerical results match the observed velocity patterns well overall except for a variance and small systematic scaling which can be attributed to the known experimental uncertainty in the MRI measurements. The comparisons presented here provide strong validation of the pore-scale simulation methods and new insights for interpretation of uncertainty in MRI measurements of pore-scale velocity. This study also provides a potential benchmark for future comparison of other pore-scale simulation methods. © 2012 Elsevier Science. All rights reserved.     

基于微CT技术的砂岩数字岩石物理实验

数字岩石物理技术可弥补传统岩石物理实验的诸多不足,为岩石物理学研究提供一个新平台.本文以常规砂岩为研究对象,利用微CT扫描结合先进的图像处理技术建立了具有真实孔隙结构特征的三维数字岩芯模型;应用Avizo软件内含的多种形态学算法进行数字岩芯孔隙结构量化及表征研究,统计获取了孔隙度、孔隙体积分布及孔径分布特征,建立了等价孔隙网络模型;将Avizo与多场耦合有限元软件Comsol完美对接,实现了孔隙尺度的渗流模拟并计算获得绝对渗透率,对于考虑固相充填孔隙的情况,模拟计算了岩石有效弹性参数,并与近似Gassmann方程良好验证.本文所提出的将Avizo与Comsol结合使用的方法丰富了现有的数字岩石物理研究手段,为其大规模发展提供了一条新途径.     

Effects of compound-specific dilution on transient transport and solute breakthrough: A pore-scale analysis

This pore-scale modeling study in saturated porous media shows that compound-specific effects are important not only at steady-state and for the lateral displacement of solutes with different diffusivities but also for transient transport and solute breakthrough. We performed flow and transport simulations in two-dimensional pore-scale domains with different arrangement of the solid grains leading to distinct characteristics of flow variability and connectivity, representing mildly and highly heterogeneous porous media, respectively. The results obtained for a range of average velocities representative of groundwater flow (0.1–10 m/day), show significant effects of aqueous diffusion on solute breakthrough curves. However, the magnitude of such effects can be masked by the flux-averaging approach used to measure solute breakthrough and can hinder the correct interpretation of the true dilution of different solutes. We propose, as a metric of mixing, a transient flux-related dilution index that allows quantifying the evolution of solute dilution at a given position along the main flow direction. For the different solute transport scenarios we obtained dilution breakthrough curves that complement and add important information to traditional solute breakthrough curves. Such dilution breakthrough curves allow capturing the compound-specific mixing of the different solutes and provide useful insights on the interplay between advective and diffusive processes, mass transfer limitations, and incomplete mixing in the heterogeneous pore-scale domains. The quantification of dilution for conservative solutes is in good agreement with the outcomes of mixing-controlled reactive transport simulations, in which the mass and concentration breakthrough curves of the product of an instantaneous transformation of two initially segregated reactants were used as measures of reactive mixing.     

基于沉积过程的数字岩石建模方法研究

本文提出模拟地层沉积及成岩过程的矿物沉积算法,建立数字岩石模型,并通过对比Micro-CT扫描图像和数值模型的局部孔隙度及平均渗流概率函数分布特征,评价建模的准确性.结果表明,由二维扫描提取的粒径信息作为输入参数,模拟矿物沉积过程建模得到的三维数字岩石模型,能够准确重构原始岩心的非均质性及渗流特性,成功应用于泥质砂岩、碳酸盐岩、页岩等存在多矿物或多尺度孔隙的数字岩石建模中.数字岩石物理是正在兴起的重要技术.数字岩石采用超高分辨率先进成像装备,采集和表征微纳尺度岩石结构,在岩石弹性、电性、核磁、渗流特性等数值计算中发挥重要作用.但是,由于三维直接成像在有限视域内难以表征足够的岩石非均质性,提取二维结构统计特征,利用统计或地质过程法重构具有代表性的三维岩石结构成为十分有价值的研究课题,而且,对业界大量存在的岩石薄片及电镜高清二维图像的深度开发应用也具有重要的现实意义.本文发展的新方法,复原沉积过程,较好地解决了孔隙尺度岩石物理定量研究中数值建模与理论计算的技术瓶颈.     

Pore-scale simulation of entrapped non-aqueous phase liquid dissolution

We investigated the dissolution of non-aqueous phase liquids (NAPLs) in a three-dimensional random sphere-pack medium using a pore-scale modeling approach to advance fundamental understanding and connect rigorously to microscale processes. Residual NAPL distributions were generated using a morphological approach and the entrapped non-wetting phase was quantitatively characterized by calculating volume, orientation, interfacial area, and shape of isolated NAPL regions. With a detailed aqueous-phase flow field obtained by a multiple-relaxation time lattice Boltzmann approach, we solved the advective–diffusive equation in the pore space using a high-resolution, adaptive-stencil finite-volume scheme and an operator-splitting algorithm. We show good agreement between the mass transfer rates predicted in the computational approach and previously published experimental observations. The pore-scale simulations presented in this work provide the first three-dimensional comparison to the considerable experimental work that has been performed to derive constitutive relations to quantify mass transfer from a residual NAPL to a flowing aqueous phase.     

Comparison of an algebraic multigrid algorithm to two iterative solvers used for modeling ground water flow and transport

Numerical solution of large-scale ground water flow and transport problems is often constrained by the convergence behavior of the iterative solvers used to solve the resulting systems of equations. We demonstrate the ability of an algebraic multigrid algorithm (AMG) to efficiently solve the large, sparse systems of equations that result from computational models of ground water flow and transport in large and complex domains. Unlike geometric multigrid methods, this algorithm is applicable to problems in complex flow geometries, such as those encountered in pore-scale modeling of two-phase flow and transport. We integrated AMG into MODFLOW 2000 to compare two- and three-dimensional flow simulations using AMG to simulations using PCG2, a preconditioned conjugate gradient solver that uses the modified incomplete Cholesky preconditioner and is included with MODFLOW 2000. CPU times required for convergence with AMG were up to 140 times faster than those for PCG2. The cost of this increased speed was up to a nine-fold increase in required random access memory (RAM) for the three-dimensional problems and up to a four-fold increase in required RAM for the two-dimensional problems. We also compared two-dimensional numerical simulations of steady-state transport using AMG and the generalized minimum residual method with an incomplete LU-decomposition preconditioner. For these transport simulations, AMG yielded increased speeds of up to 17 times with only a 20% increase in required RAM. The ability of AMG to solve flow and transport problems in large, complex flow systems and its ready availability make it an ideal solver for use in both field-scale and pore-scale modeling.     

Upscaling geochemical reaction rates using pore-scale network modeling

Geochemical reaction rate laws are often measured using crushed minerals in well-mixed laboratory systems that are designed to eliminate mass transport limitations. Such rate laws are often used directly in reactive transport models to predict the reaction and transport of chemical species in consolidated porous media found in subsurface environments. Due to the inherent heterogeneities of porous media, such use of lab-measured rate laws may introduce errors, leading to a need to develop methods for upscaling reaction rates. In this work, we present a methodology for using pore-scale network modeling to investigate scaling effects in geochemical reaction rates. The reactive transport processes are simulated at the pore scale, accounting for heterogeneities of both physical and mineral properties. Mass balance principles are then used to calculate reaction rates at the continuum scale. To examine the scaling behavior of reaction kinetics, these continuum-scale rates from the network model are compared to the rates calculated by directly using laboratory-measured reaction rate laws and ignoring pore-scale heterogeneities. In this work, this methodology is demonstrated by upscaling anorthite and kaolinite reaction rates under simulation conditions relevant to geological CO₂ sequestration. Simulation results show that under conditions with CO₂ present at high concentrations, pore-scale concentrations of reactive species and reaction rates vary spatially by orders of magnitude, and the scaling effect is significant. With a much smaller CO₂ concentration, the scaling effect is relatively small. These results indicate that the increased acidity associated with geological sequestration can generate conditions for which proper scaling tools are yet to be developed. This work demonstrates the use of pore-scale network modeling as a valuable research tool for examining upscaling of geochemical kinetics. The pore-scale model allows the effects of pore-scale heterogeneities to be integrated into system behavior at multiple scales, thereby identifying important factors that contribute to the scaling effect.     

Does pore water velocity affect the reaction rates of adsorptive solute transport in soils? Demonstration with pore-scale modelling

Modelling adsorptive solute transport in soils needs a number of parameters to describe its reaction kinetics and the values of these parameters are usually determined from batch and displacement experiments. Some experimental results reveal that when describing the adsorption as first-order kinetics, its associated reaction rates are not constants but vary with pore water velocity. Explanation of this varies but an independent verification of each explanation is difficult because simultaneously measuring the spatiotemporal distributions of dissolved and adsorbed solutes in soils is formidable. Pore-scale modelling could play an important role to address this gap and has received increased attention over the past few years. This paper investigated the transport of adsorptive solute in a simple porous medium using pore-scale modelling. Fluid flow through the void space of the medium was assumed to be laminar and in saturated condition, and solute transport consisted of advection and molecular diffusion; the sorption and desorption occurring at the fluid–solid interface were modelled as linear first-order kinetics. Based on the simulated spatiotemporal distribution of dissolved and adsorbed solutes at pore scale, volumetric-average reaction kinetics at macroscopic scale and its associated reactive parameters were measured. Both homogeneous adsorption where the reaction rates at microscopic scale are constant, and heterogeneous adsorption where the reaction rates vary from site to site, were investigated. The results indicate that, in contrast to previously thought, the macroscopic reaction rates directly measured from the pore-scale simulations do not change with pore velocity under both homogeneous and heterogeneous adsorptions. In particular, we found that for the homogeneous adsorption, the macroscopic adsorption remains first-order kinetic and can be described by constant reaction rates, regardless of flow rate; whilst for the heterogeneous adsorption, the macroscopic adsorption kinetics continues not to be affected by flow rate but is no longer first-order kinetics that can be described by constant reaction rates. We discuss how these findings could help explain some contrary literature reports over the dependence of reaction rates on pore water velocity.