Characteristics of soil water movement in a grass slope in a karst peak‐cluster region,China

Soil water is very important in hilly areas with thin soil layers and deep groundwater tables, such as the karst peak‐cluster region of Southwest China. An investigation into soil water movement can provide insights into management of shallow water resources and soil nutrients, as well as prevention of groundwater pollution. In this study, ¹⁸O and ²H tracers were used to trace soil water movement in planar soil mass type microhabitats in the middle part of a steep hillslope covered by grasses in a karst peak‐cluster region of China. From May 2008 to July 2009, samples of precipitation and two types of soil water, which had different integrated degrees of mobility and were of different depth intervals or depths, were collected. The hydrogeochemical characteristics were compared between precipitation and soil water, and these data were applied in convolution‐based lumped parameter models. Our results indicated that vertical piston flow, rather than lateral flow along the soil–bedrock interface, played an important role in soil water percolation at least in the upper soil layer approximately 7 cm over the permeable bedrock. The mixing effect and preferential flow might also play a role in soil water percolation. In general, the evaporation effect on soil water was weak except for the uppermost 10 cm soil matrix water during winter. The lower limits of mean transit time of soil matrix flow passing through 5, 15, 25, 35, and 41.5 cm depths were 4.81, 7.70, 16.19, 21.85, and 27.44 days, respectively. Our study demonstrated the crucial functions of the soil reservoir in regulating the water cycle and could provide guidance on conservation of soil water and hydrological studies. The applied method was proved to be a suitable approach for investigating soil water movement on a monthly scale.     

Scour Downstream of Grade Control Structures under the Influence of Upward Seepage

The installation of free falling jet grade control structures has become a popular choice for river bed stabilization. However, the formation and development of scour downstream of the structure may lead to failure of the structure itself. The current approaches to scour depth prediction are generally based on studies conducted with the absence of upward seepage. In the present study, the effects of upward seepage on the scour depth were investigated. A total of 78 tests without and with the application of upward seepage were carried out using three different sediment sizes, three different tailwater depths, four different flow discharges, and four different upward seepage flow discharge rates. In some tests, the three-dimensional components of the flow velocity within the scour hole were measured for both the cases with and without upward seepage. The scour depth measured for the no-seepage results compared well with the most accurate relationship found in the literature. It was found that generally the upward seepage reduced the downward velocity components near the bed, which led to a decrease in the maximum scour depth. A maximum scour depth reduction of 49% was found for a minimum tailwater depth, small sediment size, and high flow discharge. A decay of the downward velocity vector within the jet impingement was found due to the upward seepage flow velocity. The well known equation of D’Agostino and Ferro was modified to account for the effect of upward seepage, which satisfactorily predicted the experimental scour depth, with a reasonable average error of 10.7%.     

Regional scale spatial and temporal variability of soil moisture in a prairie region

Understanding the dynamics of spatial and temporal variability of soil moisture at the regional scale and daily interval, respectively, has important implications for remote sensing calibration and validation missions as well as environmental modelling applications. The spatial and temporal variability of soil moisture was investigated in an agriculturally dominated region using an in‐situ soil moisture network located in central Saskatchewan, Canada. The study site evaluated three depths (5, 20, 50 cm) through 139 days producing a high spatial and temporal resolution data set, which were analysed using statistical and geostatistical means. Processes affecting standard deviation at the 5‐cm depth were different from the 20‐cm and 50‐cm depths. Deeper soil measurements were well correlated through the field season. Further analysis demonstrated that lag time to maximum correlation between soil depths increased through the field season. Temporal autocorrelation was approximately twice as long at depth compared to surface soil moisture as measured by the e‐folding frequency. Spatial correlation was highest under wet conditions caused by uniform rainfall events with low coefficient of variation. Overall soil moisture spatial and temporal variability was explained well by rainfall events and antecedent soil moisture conditions throughout the Kenaston soil moisture network. It is expected that the results of this study will support future remote sensing calibration and validation missions, data assimilation, as well as hydrologic model parameterization for use in agricultural regions. Copyright © 2016 John Wiley & Sons, Ltd.     

Bioturbation and erosion rates along the soil-hillslope conveyor belt,part 1: Insights from single-grain feldspar luminescence

The interplay of bioturbation, soil production and long-term erosion–deposition in soil and landscape co-evolution is poorly understood. Single-grain post-infrared infrared stimulated luminescence (post-IR IRSL) measurements on sand-sized grains of feldspar from the soil matrix can provide direct information on all three processes. To explore the potential of this novel method, we propose a conceptual model of how post-IR IRSL-derived burial age and fraction of surface-visiting grains change with soil depth and along a hillslope catena. We then tested this conceptual model by comparison with post-IR IRSL results for 15 samples taken at different depths within four soil profiles along a hillslope catena in the Santa Clotilde Critical Zone Observatory (southern Spain). In our work, we observed clear differences in apparent post-IR IRSL burial age distributions with depth along the catena, with younger ages and more linear age–depth structure for the hill-base profile, indicating the influence of lateral deposition processes. We noted shallower soils and truncated burial age–depth functions for the two erosional mid-slope profiles, and an exponential decline of burial age with depth for the hill-top profile. We suggest that the downslope increase in the fraction of surface-visiting grains at intermediate depths (20 cm) indicates creep to be the dominant erosion process. Our study demonstrates that single-grain feldspar luminescence signature-depth profiles provide a new way of tracing vertical and lateral soil mixing and transport processes. In addition, we propose a new objective luminescence-based criterion for mapping the soil-bedrock boundary, thus producing soil depths in better agreement with geomorphological process considerations. Our work highlights the possibilities of feldspar single grain techniques to provide quantitative insights into soil production, bioturbation and erosion–deposition. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

A study of soil water movement combining soil water potential with stable isotopes at two sites of shallow groundwater areas in the North China Plain

In the shallow groundwater areas of the North China Plain (NCP), precipitation infiltration and evapotranspiration in the vertical direction are the main processes of the water cycle, in which the unsaturated zone plays an important role in the transformation process between precipitation and groundwater. In this paper, two typical sites in Cangzhou (CZ) and Hengshui (HS) of Hebei province with shallow water tables were selected to analyse the relationship among precipitation, soil water and groundwater. At each site, precipitation, soil water at depths 10, 20, 30, 50, 70, 100, 150, 200, 300 cm, and groundwater were sampled to analyse the stable isotope compositions of hydrogen and oxygen. The soil water potentials at the corresponding depths were observed. Although the climates at the two sites are similar, there are some differences in the infiltration process, soil water movement and groundwater recharge sources. Evaporation occurred at the upper depths, which led to the decrease of soil potential and the enrichment of heavy isotopes. At the CZ site, precipitation infiltrated with piston mode, and an obvious mixture effect existed during the infiltration process. Preferential flow may exist in the soil above 100 cm depth. However, at the HS site soil water moved in piston mode, and groundwater was mainly recharged by precipitation. When precipitation recharged the groundwater it experienced a strong evaporation effect. The results of the soil water movement mechanism provides the transformation relationship among precipitation, soil water and groundwater in the middle and eastern NCP. Copyright © 2009 John Wiley & Sons, Ltd.     

How deep can forest vegetation cover extend their hydrological reinforcing contribution?

An experimental campaign was set up to quantify the contribution of evapotranspiration fluxes on hillslope hydrology and stability for different forest vegetation cover types. Three adjacent hillslopes, respectively, covered by hardwood, softwood, and grass were instrumented with nine access tubes each to monitor soil water dynamics at the three depths of 30, 60, and 100 cm, using a PR2/6 profile probe (Delta‐T Devices Ltd) for about 6 months including wet periods. Soil was drier under softwood and wetter under grass at all the three depths during most of the monitoring period. Matric suction derived via the soil moisture measurements was more responsive to changes in the atmospheric conditions and also recovered faster at the 30 cm depth. Results showed no significant differences between mean matric suction under hardwood (101.6 kPa) with that under either softwood or grass cover. However, a significant difference was found between mean matric suction under softwood (137.5 kPa) and grass (84.3 kPa). Results revealed that, during the wettest period, the hydrological effects from all three vegetation covers were substantial at the 30 cm depth, whereas the contribution from grass cover at 60 cm (2.0 kPa) and 100 cm (1.1 kPa) depths and from hardwood trees at 100 cm depth (1.2 kPa) was negligible. It is surmised that potential instability would have occurred at these larger depths along hillslopes where shallow hillslope failures are most likely to occur in the region. The hydrological effects from softwood trees, 8.1 and 3.9 kPa, were significant as the corresponding factor of safety values showed stable conditions at both depths of 60 and 100 cm, respectively. Therefore, the considerable hydrological reinforcing effects from softwood trees to the 100 cm depth suggest that a hillslope stability analysis would show that hillslopes with softwood trees will be stable even during the wet season.     

Hydraulic conductivity in upland blanket peat: measurement and variability

A key parameter used in wetland hydrological and landform development models is hydraulic conductivity. Head recovery tests are often used to measure hydraulic conductivity, but the calculation techniques are usually confined to rigid soil theory. This is despite reports demonstrating the misapplication of rigid soil theory to non‐rigid soils such as peats. Although values of hydraulic conductivity calculated using compressible techniques have been presented for fenland peats, these data have never, to the authors' knowledge, been compared with such calculations in other peat types. Head recovery tests (slug withdrawal) were performed on piezometers at depths ranging from 10 to 80 cm from the surface on north Pennines blanket peats. Results were obtained using both rigid and compressible soil theories, thus allowing comparison of the two techniques. Compressible soil theory gives values for hydraulic conductivity that are typically a factor of five times less than rigid soil calculations. Hydraulic conductivity is often assumed to decrease with depth in upland peats, but at the study site in the northern Pennines it was not found to vary significantly with depth within the range of peat depths sampled. The variance within depth categories was not significantly different to the variance between depth categories showing that individual peat layers did not have characteristic hydraulic conductivity values. Thus, large lateral and vertical differences in hydraulic conductivity over short distances create problems for modelling but may help account for the high frequency of preferential flow pathways within what is otherwise a low matrix hydraulic conductivity peat. Hydraulic conductivity was found to vary significantly between sampling sites, demonstrating that hillslope‐ or catchment‐scale variability may be more important than plot‐scale variability. Values for compressibility of the peats are also reported. These generally decline with depth, and they also vary significantly between sampling sites. There are implications for the way in which measurements of hydraulic conductivity and other properties of blanket peat are interpreted, as the effects of environmental change in one part of a peat catchment may be very different to those in another. Copyright © 2002 John Wiley & Sons, Ltd.     

Toward a full multiscale approach to interpret potential fields

The way potential fields convey source information depends on the scale at which the field is analysed. In this sense a multiscale analysis is a useful method to study potential fields particularly when the main field contributions are caused by sources with different depths and extents. Our multiscale approach is built with a stable transformation, such as depth from extreme points. Its stability results from mixing, in a single operator, the wavenumber low‐pass behaviour of the upward continuation transformation of the field with the enhancement high‐pass properties of n‐order derivative transformations. So, the complex reciprocal interference of several field components may be efficiently faced at several scales of the analysis and the depth to the sources may be estimated together with the homogeneity degrees of the field. In order to estimate the source boundaries we use another multiscale method, the multiscale derivative analysis, which utilizes a generalized concept of horizontal derivative and produces a set of boundary maps at different scales. We show through synthetic examples and application to the gravity field of Southern Italy that this multiscale behaviour makes this technique quite different from other source boundary estimators. The main result obtained by integrating multiscale derivative analysis with depth from extreme points is the retrieval of rather effective information of the field sources (horizontal boundaries, depth, structural index). This interpretative approach has been used along a specific transect for the analysis of the Bouguer anomaly field of Southern Apennines. It was set at such scales, so to emphasize either regional or local features along the transect. Two different classes of sources were individuated. The first one includes a broad, deep source with lateral size of 45∼50 km, at a depth of 13 km and having a 0.5 structural index. The second class includes several narrower sources located at shallowest depths, ranging from 3–6 km, with lateral size not larger than 5 km and structural indexes ranging from 1–1.5. Within a large‐scale geological framework, these results could help to outline the mean structural features at crustal depths.     

The soil hydrologic response to forest regrowth: a case study from southwestern Amazonia

As a large and dynamic land‐use category, tropical secondary forests may affect climate, soils, and hydrology in a manner different from primary forests or agricultural areas. We investigated the saturated hydraulic conductivity K_sat of a Kandiudult under different land uses in Rondonia, Brazil. We measured K_sat at four depths (12·5, 20, 30 and 50 cm) under (a) primary forest, (b) a former banana–cacao plantation (SF1), and (c) an abandoned pasture (SF2). At 12·5 cm, all three land uses differ significantly (α = 0·1), but not at the 20 and 30 cm depths. At 50 cm, K_sat was significantly greater in the former pasture than in other land uses. Lateral subsurface flow is expected during intense rainfall (about 30 times per year) at 30 cm depth in SF1 and at 50 cm depth in the forest, whereas the relatively low permeability at shallow 12·5 cm in the SF2 may result not only in lateral subsurface flow, but also saturation overland flow. For modelling purposes, recovering systems seem to have K_sat values distinct from primary forest at shallow depths, whereas at deeper layers (>20 cm) they may be considered similar to forests. Copyright © 2002 John Wiley & Sons, Ltd.     

Soil carbon storage following road removal and timber harvesting in redwood forests

Soil carbon storage plays a key role in the global carbon cycle and is important for sustaining forest productivity. Removal of unpaved forest roads has the potential for increasing carbon storage in soils on forested terrain as treated sites revegetate and soil properties improve on the previously compacted road surfaces. We compared soil organic carbon (SOC) content at several depths on treated roads to SOC in adjacent second‐growth forests and old‐growth redwood forests in California, determined whether SOC in the upper 50 cm of soil varies with the type of road treatment, and assessed the relative importance of site‐scale and landscape‐scale variables in predicting SOC accumulation in treated road prisms and second‐growth redwood forests. Soils were sampled at 5, 20, and 50 cm depths on roads treated by two methods (decommissioning and full recontouring), and in adjacent second‐growth and old‐growth forests in north coastal California. Road treatments spanned a period of 32 years, and covered a range of geomorphic and vegetative conditions. SOC decreased with depth at all sites. Treated roads on convex sites exhibited higher SOC than on concave sites, and north aspect sites had higher SOC than south aspect sites. SOC at 5, 20, and 50 cm depths did not differ significantly between decommissioned roads (treated 18–32 years previous) and fully recontoured roads (treated 2–12 years previous). Nevertheless, stepwise multiple regression models project higher SOC developing on fully recontoured roads in the next few decades. The best predictors for SOC on treated roads and in second‐growth forest incorporated aspect, vegetation type, soil depth, lithology, distance from the ocean, years since road treatment (for the road model) and years since harvest (for the forest model). The road model explained 48% of the variation in SOC in the upper 50 cm of mineral soils and the forest model, 54%. Copyright © 2015 John Wiley & Sons, Ltd.     

Depletion and recharge of soil water in two stands of norway spruce (picea abies (l.) karst)

Depletion and recharge dynamics of soil water were studied at two forest sites in Northern and Southern Sweden during three growing seasons. At each site, having a stand of Norway spruce (Picea abies (L.) Karst), soil water potential was measured with 90 gypsum blocks in 30 profiles at depths of 6, 20, and 50 cm from the soil surface. The size of the rectangular plots was 250 m². The large variation in soil water potential during desiccation periods extended throughout the measuring range of the gypsum blocks. The soil water potentials, at different times and depths, were log-normally distributed during only parts of the desiccation periods. Due to the large variation and skewed distribution of soil water potentials the nonparametric Spearman rank correlation statistics was used to analyse the pattern of desiccation and rewetting of the soil. In the beginning of a dry period the topsoil was more efficiently desiccated than the subsoil at both sites. This difference lasted throughout all droughts at the southern site and was explained by a higher root density in the topsoil. At the northern site, however, there was no difference in the degree of desiccation at different soil depths during an extended desiccation period. While certain microsites tended to be more depleted than others during desiccation periods, this did not prove to be significantly correlated to the rewetting of the soil after the different droughts. There was a vertical relationship in soil water desiccation in which an accentuated water depletion at the 6 cm soil depth was followed by a similar strong depletion 14 cm lower in the same observation profile. Strongly desiccated observation profiles were not necessarily situated close to each other but seemed randomly spread over the site. There was no relationship between extracted water at any of the three soil depths in the different observation profiles and proximity to trees or tree size.     

Stratification response of soil water content during rainfall events under different rainfall patterns

Many researchers have studied the influence of rainfall patterns on soil water movement processes using rainfall simulation experiments. However, less attention has been paid to the influence under natural condition. In this paper, rainfall, soil water content (SWC), and soil temperature at 10‐, 20‐, 30‐, 40‐, and 50‐cm depths were simultaneously monitored at 1‐min intervals to measure the variation in SWC (SWCv) in response to rainfall under different rainfall patterns. First, we classified rainfall events into four patterns. During the study period, the main pattern was the advanced rainfall pattern (38% of all rainfall events), whereas the delayed, central, and uniform rainfall patterns had similar frequencies of about 20%. During natural rainfall, rainwater rapidly passed through the top soil layers (10–40 cm) and was accumulated in the bottom layer (50 cm). When a high rainfall pulse occurred, the water storage balance was disturbed, resulting in the drainage of initial soil water from the top layers into the deeper layers. Therefore, the critical function of the top layers and the bottom layers was infiltration and storage, respectively. The source of water stored in the bottom layer was not only rainfall but also the initial soil water in the upper soil layers. Changes in soil temperature at each soil depth were comonitored with SWCv to determine the movement characteristics of soil water under different rainfall patterns. Under the delayed rainfall pattern, preferential flows preferred to occur. Under the other rainfall patterns, matrix flow was the main form of soil water movement. Rainfall amount was a better indicator than rainfall intensity for SWCv in the bottom layer under the delayed rainfall pattern. These results provide insights into the responses of SWCv under different rainfall patterns in northern China.     

A Comparison of Tools and Methods for Estimating Groundwater-Surface Water Exchange

A comparison of tools for measuring discharge rates in a sandy streambed was conducted along a transect near the north bank of the Grindsted Å (stream), Denmark. Four tools were evaluated at six locations spaced 3 m apart in the stream: mini-piezometers, streambed point velocity probes (SBPVPs), temperature profilers, and seepage meters. Comparison of the methods showed that all identified a similar trend of low to high groundwater discharges moving westward along the transect. Furthermore, it was found that the differences between discharges estimated from Darcy calculations (using the mini-pizometers), and SBPVPs were not statistically different from zero, at the 90% confidence level. Seepage meter estimates were consistently lower than those of the other two methods, but compared more reasonably with the application of a correction factor of 1.7, taken from the literature. In contrast, discharges estimated from temperature profiling (to a depth of 40 cm) were found to be about an order of magnitude less than those determined with the other methods, possibly due to interferences from horizontal hyporheic flow. Where the various methods produced statistically different discharge estimations at the same location, it is hypothesized that the differences arose from method-specific sources of bias, including installation depths. On the basis of this work, practitioners interested in measuring flow across the groundwater-surface water interface achieve the least variability with seepage meters and the SBPVP. However the accuracy of the seepage meter depended on a calibrated correction factor while that of the SBPVP did not.     

Soil moisture response to rainfall on the Chinese Loess Plateau after a long‐term vegetation rehabilitation

The Chinese Loess Plateau (CLP) is a unique Critical Zone with deep loess deposits, where soil moisture is primarily replenished by seasonal monsoon rainfall. However, the role of vegetation, coupled with complex topography, on rainwater infiltration on the CLP, especially after long‐term revegetation for controlling erosion, is inadequately quantified. Over the growing season of 2016, we monitored soil moisture at the 30‐min interval at 5 depths (10, 20, 40, 60, and 100 cm) in an afforested catchment and a nearby catchment with natural regrowth of grasses. Two monitoring sites were established in each catchment, one in the downhill gully and the other in the uphill slope. We found that vegetation, topography, and rainfall attributes together determined rainwater infiltration and soil moisture replenishment. An accumulated rainfall amount of 9 mm was required to trigger soil moisture response at 10‐cm depth at the 2 grassland sites and the forestland uphill‐slope site whereas 14 mm of rainfall was required for the forestland gully site covered by dense undergrowth and trees. Rainfall events with larger sums and higher peak intensities permitted rainwater infiltration to deeper soil depths. However, no rain recharged soil moisture to 100‐cm depth during the monitoring period. The forestland uphill‐slope site showed the deepest wetting depth (up to 60‐cm depth), fastest wetting‐front velocity (up to 4 cm/hr below 10‐cm depth), and the most significant soil moisture increase (up to 15% cm ³ cm^?3 increase at 10‐cm depth) after rainfall in the growing season. The grassland gully site had the highest soil water storage, whereas soil moisture was depleted the most at the forestland gully site. Findings of this study reveal the transient dynamics of soil moisture after rainfall on the CLP, which signifies the role of revegetation on rainwater infiltration in the loess Critical Zone.     

Summer soil moisture loss at Utah SNOTEL sites and streamflow recession at nearby gauges: variability in runoff generation and the potential for flow forecasting

This analysis compares decreases in soil moisture (SM) at Utah snow telemetry (SNOTEL) sites during the summer months with discharge at nearby stream gauging locations using data from water years 2008–2012. The following characteristics were evaluated: (1) the influence of the SM loss at mid‐depths (20 cm) on hydrograph recession, (2) the influence of moisture loss from deeper portions of the soil (50 cm) on late‐season baseflow and (3) the timing of this transition. Thirty‐four pairings were used between SNOTEL sites and nearby stream gauges in select locations throughout Utah, for 3–5 years each depending on data quality, to generate 143 total comparisons of soil moisture loss and stream discharge. Regressions were fairly strong (r² > 0.8) where the SNOTEL site was in a location with slow meltout rates, ample infiltration and minimal summer precipitation. In a few cases, the correlation was remarkably strong (r² > 0.95), even for SNOTEL sites located far from respective stream gauges (e.g. >30‐km, >1000‐m elevation difference for the best pairing). At such sites, transition timing in 2013 (between predominantly 20‐ vs 50‐cm SM loss) was well predicted from 2012 data given the similarity in water years, with discharges at the transition point less than 30% different than observed values in 2013. An index of the robustness of each pairing was generated to determine where this type of analysis might be most successful; however, results suggest that identification of high‐quality pairings may need to be site by site. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.     

Factors affecting soil moisture spatial variability for a humid forest hillslope

Soil moisture is an important variable in explaining hydrological processes at hillslope scale. The distribution of soil moisture along a hillslope is related to the spatial distribution of the soil properties, the topography, the soil depth, and the vegetation. In order to investigate the factors affecting soil moisture, various environmental data were collected from a humid forest hillslope in this study. Several factors (the wetness index; the contributing area; the local slope; the soil depth; the composition of sand, silt, and clay; the scaling parameter; the hydraulic conductivity; the tree diameter at breast height; and the total weighted basal area) were evaluated for their effect on soil moisture and its distribution over the hillslope at depths of 10, 30, and 60 cm. Both linear correlation analysis and empirical orthogonal function analysis indicated that the soil texture was a dominant factor in soil moisture distribution. The impact of soil hydraulic conductivity was important for all soil moisture ranges at a depth of 30 cm, but those at 10 and 60 cm were limited to very wet and dry conditions, respectively. The relationships of the various factors with the spatial variability of soil moisture indicated the existence of a threshold soil moisture that is related to the composition of the soil and the factors related to the distribution of water in the study area.     

鄱阳湖典型洲滩湿地水分补排关系

湿地水分在地下水含水层-土壤-植物-大气界面的运移和转换是维持能量和营养物平衡的重要环节,水分运移是湿地生态水文过程研究的关键.数值模型模拟已成为水分运移研究的重要手段,然而限于复杂的湿地自然条件及有限的监测手段,部分界面水分通量连续动态变化数据的获取及定量化工作较为困难,目前应用数值模拟法于湿地水分运移研究的案例仍不多见.本文以鄱阳湖典型湿地为研究区,构建垂向一维数值模型,阐释了湖泊水位显著季节性变化条件下,湿地水分在不同界面的传输过程,量化了湿地水分的补排关系.结果表明:(1)界面水分通量季节性差异大,降雨入渗地面和根系层水分渗漏均对降雨变化响应敏感,主要集中在4—6月,分别占年总量(1450和1053 mm)的65%和73%.土面蒸发和植物蒸腾年总量为176和926 mm,土面蒸发主要受气候条件影响,植物蒸腾还与植物生长特征有关,均集中在7—8月,分别占年总量的30%和47%.深层土壤向浅层根系层的水分补给集中发生在地下水浅埋时段6—8月,占年总量(609 mm)的76%;(2)湿地植物根系层水分补排受鄱阳湖水位季节性波动影响显著.除丰水期(7—9月)主要补给为深层土壤水外,退、枯、涨水期的主要补给均为降水入渗.涨水期(4—6月)和枯水期(12—3月)的主要排泄为根系层水分渗漏,丰水期以植物蒸腾排泄为主,退水期(10—11月),土面蒸发与植物蒸腾为主要排泄,且比重相当.本文定量了鄱阳湖典型湿地不同界面水分连续交换关系,区分了土面蒸发和植物蒸腾,辨析了各界面水分的主要影响因子,研究结果有助于深入理解水分在湿地生态系统地下水含水层-土壤-植物-大气界面的相互作用机制,认识湖泊洲滩湿地水量平衡,为揭示湖泊水情变化对湿地生态的可能影响提供依据,为湿地生态水文过程研究提供重要方法和理论参考.     

An analytical solution for predicting transient seepage into ditch drains from a ponded field

An analytical solution is provided for predicting time dependent seepage into an array of equally spaced parallel ditch drains in a homogeneous and anisotropic soil medium underlain by an impervious layer and receiving water from a ponded horizontal field of infinite extent. The solution can account for both unequal levels of water in the adjacent drains and variable depths of ponding at the soil surface. The validity of the developed model is tested by first reducing it to a steady state solution and then comparing predictions obtained from it for a few flow situations with corresponding predictions obtained from the analytical works of others. A numerical comparison of the developed model for a flow situation is also carried out using MODFLOW. The surface discharge distribution is found to show relatively greater uniformity at the early stages of simulation but with the progress of time, the extent of uniformity is found to reduce particularly for cases where the soil is subjected to a uniform depth of ponding. However, even when a soil surface is subjected to a constant depth of ponding, a high anisotropy ratio (ratio of horizontal to vertical hydraulic conductivity of soil) of the soil alone may lead to a marked improvement on the uniformity of the surface discharge distribution at all times in comparison to a soil having a low anisotropy ratio. A better uniformity of surface discharge may also be achieved by suitably adjusting the depths of ponding over the surface of the soil – regions close to the ditches be provided with zero or negligible depths of ponding and the ponding depths may be made to progressively increase with the increase in distance from the ditch faces. As the developed analytical model is of a general nature, it is hoped that the solution provided herein will lead to a better and realistic design of ditch drainage networks for controlling waterlogged areas and in reclaiming salt affected soils.     

Spatial and temporal variations in temperate forest soil carbon dioxide during the non-growing season

In the Whitehall Forest of Georgia during the 1985-86 non-growing season soil CO₂ varied with soil depth, varied spatially at constant depth, and varied temporally with changing environmental conditions. Variations with depth in the upper 1.4 m of the soil were of greater magnitude than temporal variations and spatial differences at 30 cm depth were of lesser magnitude. Mean soil CO₂ in evergreen forest was higher (0.207 per cent) than in deciduous and mixed forest (0.157 per cent). There were no trends in soil CO₂ along hillslopes or with changes in soil texture, bulk density, moisture content, or temperature. Soil CO₂ did increase near trees possibly due to increased root densities and/or more numerous pockets of microbial activity. For CO₂ at 30 cm depth, two variables–the mean daily temperature range in the month before measurement and actual evapotranspiration in the week before measurement (AET7)–explained 76 per cent of the variation in mean soil CO₂. At the profile site, where soil CO₂ was measured at five depths, 66 per cent of the variability in CO₂ was explained by soil depth, AET7, and the average daily temperature range in the two months before measurement.