Paleomagnetic results from the Permian Rodez basin implications: the Late Variscan tectonics in the southern French Massif Central

Abstract

A paleomagnetic study has been carried out on three sedimentary formations of the Permian Rodez basin in the southern France. Two of them yield paleomagnetic poles of Saxonian and Thuringian age showing counterclockwise rotation of moderate amplitude, during or after the Thuringian deposition. For the French Massif Central, contrary to its stable southern (Lodève basin) and eastern (Largentière basin) borders, on its southwestern border, in a large area including the Rodez, Saint-Affrique and perhaps Brive basins suffered rotations due to the extensional tectonics during the Late Variscan period. © 2002 Editions scientifiques et médicales Elsevier SAS. All rights reserved.     

New Early Permian paleomagnetic results from the Brive basin (French Massif Central) and their implications for Late Variscan tectonics

In order to assess the structural evolution of the Brive basin and the Paleozoic activity of surrounding major faults in the French Massif Central, we carried out a paleomagnetic study on Early Permian rocks from this basin. Positive-fold tests and solely reversed polarities indicate that the characteristic remanent magnetization is likely to be primary. Early Permian tilt-corrected site mean declinations vary from 207°–167° indicating that the Brive basin experienced internal vertical-axis rotations. On the contrary, Late Permian paleomagnetic site means exhibit a circular Fisherian distribution showing no relative rotations. Detailed analyses of Permian paleomagnetic data from five contemporaneous basins of the French Massif Central reveal that these basins share the same equatorial paleolatitude with stable Europe throughout the Permian. However, in Early Permian, three of the five basins experienced differential rotations. The Saint-Affrique basin not only suffered internal deformation during the Early Permian, but the basin as a whole underwent a full-scale counterclockwise vertical-axis block rotation with respect to stable Europe. As a consequence, paleomagnetic data from similar late orogenic basins have to be thus carefully considered for establishment of Apparent Polar Wander paths.     

Extensional ductile tectonics of the Sioule metamorphic series (Variscan French Massif Central)

In the Northern part of the Variscan French Massif Central, the Sioule series, from top to bottom, consists of a pre-Viséan granite, migmatite, gneiss and mica schist. Two ductile deformations have been recognized. The earlier phase is characterized by a north-east-south-west trending stretching lineation; the second phase, characterized by a north-west-south-east trending mineral, stretching and crenulation lineation, is better marked in the lower mica schist part than in the upper granito-gneissic part. This second phase occurred during retrogression of the metamorphic rocks; related shear criteria indicate a top to the south-west shear. The Namurian-Westphalian magmatic bodies such as the Echassières leucogranite, Pouzol-Servant microgranite and numerous north-east -south-west trending microgranite dykes are emplaced in extensional fractures related to the same north-west-south-east maximum stretching direction. The asymmetrical shapes of the two granitic massifs indicate that they intruded towards the south-east. The synkinematic retrogression of the metamorphic rocks, the shape of the magmatic bodies and a re-examination of the numerous available data support the interpretation that the deformation is due to the extensional tectonic regime related to the Variscan crustal re-quilibration. This interpretation is in agreement with the correlation of the Sioule series with the Chavanon series. The two series belong to a unique tectono-metamorphic unit left-laterally offset by the Stephanian motion of the Sillon Houiller fault. This study also shows that the Sillon Houiller did not play a significant part during the Namurian-Westphalian extensional tectonics of the Massif Central. Correspondence to: M. Faure     

5: Late Variscan mineralizing systems related to orogenic processes: The French Massif Central

The French Massif Central constitutes an exceptional study area due to the diversity of its metallic deposits, its internal position in the Variscan belt, and the abundance of available geological, geophysical and metallogenic data obtained within the GeoFrance 3D programme. The deposits, formed towards the end of the orogenic evolution, represent the economic products of two distinct mineralizing systems, a Au ± Sb hydrothermal system and a W ± Sn and rare-metals magmatic–hydrothermal system, which were simultaneously active during a short time span between ca. 310 and 300 Ma.Two types of gold deposit can be distinguished on the basis of their depth of emplacement: “deep-seated” gold deposits developed under lithostatic to hydrostatic pressure during rapid exhumation, and “shallow” gold deposits emplaced under hydrostatic pressure with no significant uplift.Deposits of W ± Sn and rare-metals were emplaced in the upper crust during final crystallization of specialized magmas after their rapid ascent, perhaps enhanced by simultaneous regional uplift. The gold-bearing systems are associated with a complex network of re-activated crustal-scale faults initially active during the period between 335 and 315 Ma. Normal motion along the faults, coeval with 335 to 315 Ma granite–migmatite domes, played a major role in the 3D distribution of the hydrothermal plumbing system. Gold and related metals were carried within huge hydrothermal cells, which reached ca. 100 km by 10 km in area, and 30 km in depth. In contrast, granites rich in magmatophile elements (W, Sn, rare-metals) generated smaller hydrothermal cells (10 km by 10 km in area, and < 6 km deep). Extraction of metals, by both deep-seated fluids and specialized magmas, occurred during granulitization of the lower crust at 300 ± 15 Ma. In the French Massif Central, the genesis of the two late Carboniferous mineralizing systems coincided with the end of syn-collisional extension and ended just before post-collisional extension.     

A review of the pre-Permian geology of the Variscan French Massif Central

The Massif Central, like the southern part of the Massif Armoricain, belongs to the north Gondwana margin. The Massif Central consists of a stack of nappes resulting from six main tectonic-metamorphic events. The first, D₀, is coeval with a Late Silurian (ca 415 Ma) high-pressure (HP) (or ultra high-pressure) metamorphism for which the associated structures are poorly documented. The Early Devonian D₁ event, responsible for top-to-the-southwest nappe displacement, is coeval with migmatization and the exhumation of HP rocks around 385–380 Ma. In the northern part of the Massif Central, metamorphic rocks with retrogressed eclogites are covered by Late Devonian undeformed sedimentary rocks. The Late Devonian-Early Carboniferous D₂ event involves top-to-the-northwest shearing, coeval with an intermediate pressure-temperature metamorphism dated around 360–350 Ma. The Visean D₃ event is a top-to-the-south ductile shearing, which is widespread in the southern Massif Central. Coevally, in the northern Massif Central, the D₃ event corresponds to the onset of synorogenic extension. The next two events, D₄ and D₅, of Early and Late Carboniferous age, correspond to the syn- and late orogenic extensional tectonic regimes, respectively. The former is controlled by NW–SE stretching whereas the latter is accommodated by NNE–SSW stretching. These structural and metamorphic events are reconsidered in a geodynamic evolution model. The possibilities of one or two cycles involving microcontinent drifting, rewelding and collision are discussed.     

Polyphase wrench tectonics in the southern french Massif Central: kinematic inferences from pre- and syntectonic granitoids

In the Variscan French Massif Central, the South Limousin area consists of low- to medium-grade metamorphic rocks intruded by two granitic bodies. The structural and textural analyses of these plutons undertaken in parallel with the structural analysis of their host rocks allow us to characterize and to date different stages in the tectonic evolution of this area. This study shows that the South Limousin area experienced successivelly two strike-slip events along two geographically distinct shear zones, from north to south the left-lateral Estivaux and the right-lateral South Limousin strike-slip faults, respectively. These ductile faults subdivide the South Limousin into three structural units, from north to south they are the Upper Gneiss unit, Thiviers-Payzac unit .and Génis unit. The two granitic bodies intrude the Thiviers-Payzac unit only. The younger Estivaux granite is a syntectonic pluton which emplaced during left-lateral wrenching. ⁴⁰Ar/³⁹Ar dates from biotites indicate an Early Carboniferous age (346 ± 3 Ma). The older granite is a pretectonic body. It is the Ordovician Saut du Saumon augen orthogneiss in which detailed structural analyses show the polyphase nature of the solid-state deformation. Our microtectonic data indicate that the right-lateral motions overprint the left-lateral ones and produce apparently symmetrical fabrics.     

Characterization of wrench tectonics from dating of syn- to post-magmatism in the north-western French Massif Central

This work establishes the relative timing of pluton emplacement and regional deformation from new dating and structural data. (1) Monazite and (2) zircon dating show Tournaisian ages for the Guéret granites [Aulon granite 352 ± 5 Ma (1), 351 ± 5 Ma (2) and Villatange tonalite 353 ± 6 Ma (1)] and Viseo-Namurian ages for the north Millevaches granites [Chavanat granite 336 ± 4 Ma (1), Goutelle granite 336 ± 3 Ma (1), Royère granite 323 ± 2 Ma (1) and 328 ± 6 Ma (2), Courcelles granite 318 ± 3 Ma (1)]. The Guéret and Millevaches granites are separated by the N110 Arrènes–la Courtine Shear Zone (ACSZ), composed from West to East by the Arrènes Fault (AF), the North Millevaches Shear Zone (NMSZ) and the la Courtine Shear Zone (CSZ), respectively. Tournaisian Guéret granites experienced a non-coaxial dextral shearing (NMSZ) recorded by the Villatange granite while the Aulon granite (Guéret granite) cuts across this dextral shear zone which thus stopped shearing during Tournaisian time. Visean to Namurian Millevaches granites experienced a coaxial deformation. Therefore, low displacements along the NMSZ and the CSZ occurred at the emplacement time of Chavanat and Pontarion-Royère granites (336–323 Ma). The structural analyses of Goutelle granite emphasizes a deformation related to the dextral Creuse Fault System (CFS) oriented N150–N160. From 360 to 300 Ma, the Z strain axis is always horizontal inferring a wrench setting for these granite emplacements. During this tectonic evolution, the Argentat zone acted as a minor normal fault and is related with a local Middle Visean (340–335 Ma) syn-orogenic extension on the western border of the Millevaches massif.     

From late Visean to Stephanian: pinpointing a two-stage basinal evolution in the Variscan belt. A case study from the Bosmoreau basin (French Massif Central) and its geodynamic implications

Post-convergence evolution of the Variscan belt is characterized by the development of intramontane coal-bearing basins containing volcano-sedimentary successions. In the French Massif Central, K––Ar ages on clay particles from fine-grained sediments of the Bosmoreau basin (Limousin area), help pinpoint the evolution of the basin. In the lower part of the sedimentary pile, illite in a siltstone underlying a volcanic layer previously dated at 332±4 Ma by the U––Pb method on zircon, yields a consistent K––Ar age of ca. 340 Ma. Upward in the sedimentary succession, illite yields Stephanian K––Ar ages, which can be combined to provide a mean deposition age of 296.5±3.5 Ma. The Bosmoreau basin, albeit mainly filled with Stephanian deposits, was initiated during the late Visean, i.e. ca. 30 Ma earlier than inferred from biostratigraphical constraints. During the Stephanian, the same structure was reactivated and late Visean deposits were eroded and subsequently blanketed by thick clastic sediments. These results emphasise a two-stage evolution for the Bosmoreau basin, which is closely related to extensional tectonics identified on basement country rocks, and they are used to propose a geodynamic evolution of the studied area.     

Ore deposits of the French Massif Central: insight into the metallogenesis of the Variscan collision belt

The French Massif Central (FMC) represents the whole West European Variscan (WEV) belt, in terms of both the geodynamic evolution and the metallic content. Thus, a study of the metallogenic evolution of the FMC may elucidate the conditions that allow the mineralisation of a collision belt, since recent collision belts, e.g. the Himalayas or the Alps show that mineralisation does not necessarily result from the collision process. The Palaeozoic history of the FMC is divided into three geodynamic stages unevenly involved from the metallogenic view point. The Eo-Variscan stage (Cambrian to Silurian) was not important; the Meso-Variscan stage (Devonian-Early Carboniferous) was of limited importance; and most of the mineralisations formed during the Neo-Variscan stage (Late Carboniferous-Early Permian). In addition, some more mineralisation was produced during the Mesozoic because of the thermal reactivation linked with the Alpine orogenies. The Eo-Variscan stage (Cambrian-Silurian) corresponded to the pre-collision history, marked at the WEV belt scale by a fragmentation of the northern Gondwana (immature crust evolved from the Late Proterozoic Cadomian orogeny), up to the break-up of the crust and the formation of oceanic basins (Cambrian-Ordovician), followed by their resorption by subduction during the Silurian. In the FMC, no subduction-related magmatism is known (being rare at the WEV belt scale), and consequently subduction-related mineralisation, e.g. porphyry copper, is unknown in the WEV belt. Although some ophiolitic remnants are known, they never display Cyprus-type VMS deposits, nor massive podiform chromitites. Beside platformal sedimentary deposits on passive margins, the only deposits formed during the Eo-Variscan stage were of the SEDEX type, linked with the early rifting of the Gondwanian crust. The Meso-Variscan stage (Devonian-Early Carboniferous) corresponded to the collision proper, with the formation of crustal-scale nappe structures and the intrusion of collision-related peraluminous granites. Although these granites were enriched in rare metals they did not yield significant hydrothermal mineralisation, due to the great depth of their emplacement, as the similar granites in the Himalayas. However, they were a source of rare metals (in particular, uranium) for later mineralisation events. At the WEV belt scale Devonian distensive events are coeval with the collision. They were recorded by the formation of sedimentary basins of limited time and space extent, corresponding to the splitting of the continental crust (up to formation of oceanic domains in many cases), and were characterised by a bi-modal (“spilite-keratophyre”) volcanism. These basins formed in transtensional (or pull-apart) settings along major strike-slip faults, a peculiarity of the Variscan collision belt (which may conveniently be described as a “strike-slip orogen”). In such basins, many deposits linked with the volcanic thermal energy were formed: SEDEX deposits of the Meggen-type, iron deposits of the Lahn-Dill-type and VMS base metal deposits, the latter being the only ones known in the FMC (Brévenne deposits). The Neo-Variscan stage corresponded to the “hypercollision” and was characterised by a shift from compressional tectonics (late thickening of the crust during the Sudetian event and long-lasting dextral strike-slip tectonics along NW-SE to NE-SW fault zones) towards extensional tectonics (“basin and range” of the Late Stephanian-Early Permian), as well as by high heat flows, recorded by LP-HT metamorphism, extensive granitisation and granulitisation of the lower crust. These characteristics record the development of a lithospheric delamination process. In response to the energetic input released by this process, numerous hydrothermal deposits were formed in the FMC, as well as in the whole WEV belt, during the Neo-Variscan stage. These are mainly: (1) high-temperature granite-centered tungsten deposits, mainly associated with cordierite-bearing high level intrusions of Namurian-Westphalian age; (2) rare metal granites (and the associated hydrothermal tin mineralisations), resulting from fluid-induced low-degree partial melting of the middle crust in relation with the devolatilisation of the granulitised lower crust; (3) shear-zone hosted gold and antimony deposits, related to crustal-scale hydrothermal circulation, triggered by the transition to extensional tectonics at about 300 Ma; and (4) uranium deposition in extensional settings related to the Early Permian distension. The Post-Variscan mineralising events recorded the renewal of thermal flows in the lithosphere linked with early Alpine events (mainly the Trias-Lias distension in the Tethyan realm and the middle Cretaceous opening of the Bay of Biscay in the Pyrenean realm). They resulted in low-enthalpy geothermal systems, leading to a variety of deposits, mainly: (1) F-Ba districts, reworking F and Ba from Late Variscan granites and ignimbrites; (2) a major uranium deposit (Lodève), reworking uranium from the Permian Lodève basin; and (3) Zn-Pb districts of the MVT-type. Finally, the mineralisation of the Variscan collision belt is mainly the consequence of the Neo-Variscan lithospheric delamination process. By contrast, the absence of such a process in collision belts like the Himalayas or the Alps is the key of them being devoid of mineralisation. It appears that the mechanical energy released by the collision itself is not sufficient to mobilise and concentrate the trace elements involved in the metallogenic processes. Received: 1 September 1998 / Accepted: 3 February 1999     

Variscan to eo-Alpine events recorded in European lower-crust zircons sampled from the French Massif Central and Corsica, France

Ion-microprobe U–Pb zircon dating of lower-crust metasedimentary granulite are reported on samples from two localities in Europe in order to determine (a) how this environment recorded the Variscan and eo-Alpine events, and (b) whether the transition between the two orogenic cycles was continuous or separated by a gap. The samples come from enclaves hosted by Miocene volcanoes at Bournac in the French Massif Central, and from the granulitic metasedimentary basement of the Alpine Santa Lucia nappe in Corsica, on the South European paleomargin of the Ligurian branch of the Tethys Sea. The zircon ages from Bournac range between 630 and 430 Ma and between 380 and 150 Ma with a major frequency peak at 285 Ma; the zircons older than 430 Ma are interpreted as detrital, whereas those younger than 380 Ma are considered to have formed by metamorphic processes after burial in the lower crust. Zircon ages from Santa Lucia range from to 356 to 157 Ma, with exception of one inherited Archean grain, and are interpreted like the younger Bournac zircons as having been formed by metamorphic processes.

In a granulite metamorphic environment, as opposed to an anatectic environment, new zircon growth can occur in the solid state. Once Zr has been incorporated into zircon, however, it is difficult to remobilize without dissolution; thus Zr available for new zircon growth must result from the breakdown of Zr-bearing minerals during prograde and/or retrograde events. In this light, the U–Pb zircon-age probability curves are interpreted as markers for major tectonometamorphic events, as suggested by the close correspondence between peaks in the curve and geological events recorded in the upper-crust, such as magma emplacement and basin subsidence.

Evidence of a tectonometamorphic gap between the Variscan and Alpine orogeneses is provided by the Santa Lucia zircon-age probability curve, which reveals a probable interlude during the Variscan–Alpine transition between 240 and 210 Ma. Here, the peak at 240 Ma is interpreted as the very beginning of crustal extension and the low at 210 Ma as a period of quiescence prior to the formation of an active margin and oceanization.     

Crust-mantle relationships in the French Variscan chain: the example of the Southern Monts du Lyonnais unit (eastern French Massif Central)

Garnet lherzolite from the Lyonnais area (eastern French Massif Central) occurs as several lenses elongated within the regional foliation of garnet-biotite-sillimanite gneisses. Within the peridotites a mylonitic foliation can be observed which clearly is oblique to the regional foliation of the surrounding gneisses. Petrological and thermobarometric studies emphasize a tectonometamorphic re-equilibration for both crustal and mantle rocks characterized by a prograde metamorphic stage followed by retrograde evolution. During the burial stage, interpreted as lithospheric subduction, the peridotites underwent their mylonitic deformation, under high-pressure conditions (23–30 kbar). In contrast, the paragneisses have suffered their deformation during the retromorphic evolution under mesozonal conditions (6–8 kbar, 700°C). Our thermobarometric investigations allow us to interpret the granulitic/ultramafic association from the Monts du Lyonnais area as a lithospheric section buried into a Palaeozoic subduction zone, laminated during continental collision and uplifted by erosion processes.     

Origin and tectonic significance of corundum–kyanite–sapphirine amphibolites from the Variscan French Massif Central

The contact zone between two major allochthonous lithotectonic units in the French Massif Central (FMC) is characterized by the presence of corundum‐bearing amphibolites associated with serpentinites, flaser‐gabbros, eclogites and granulites. These unusual amphibolites are best preserved in the Western FMC, where they are found within the lower oceanic crust of the Limousin ophiolite. Mineralogical observations and thermodynamic modelling of the spinel–corundum–sapphirine–kyanite amphibolites in the CMASH system show that they were formed at peak P–T conditions around 800 °C/10 kbar in response to near isothermal burial followed by a retrogressive anticlockwise path. Metamorphic reactions are controlled both by modification of P–T conditions and by local chemical changes linked to fluid infiltration. Pargasite growth has been enhanced by infiltration of Ca‐ and Al‐rich fluids whereas kyanite‐ and sapphirine‐forming reactions are partly controlled by local inputs of MgO–SiO₂ components, most probably during infiltration metasomatism. By analogy with worldwide ophiolites (Oman, Tethyan, Appalachian) and published numerical models, subduction of a still‐hot oceanic ridge is proposed to form these Al‐rich amphibolites from plagioclase‐rich troctolites. The trace‐element composition of high‐Ti, fine‐grained amphibolites (former fine‐grained Fe–Ti gabbros) adjacent to the corundum‐bearing ones, further indicates that the oceanic crust was initially created at a mid‐ocean ridge (rather than within a back‐arc basin), followed by the emplacement of supra‐subduction zone‐type magmas, probably due to intraoceanic subduction close to the ridge.     

Structural,AMS and geochronological study of a laccolith emplaced during Late Variscan orogenic extension: the Rocles pluton (SE French Massif Central)

In the southern French Massif Central, the Rocles leucogranite of Variscan age consists of three petrographic facies; textural analysis shows that they experienced the same subsolidus deformation. New chemical U-Th-Pb dating on monazite yielded 324 ± 4 Ma and 325 ± 5 Ma ages for muscovite-rich and biotite-rich facies respectively. AMS-study results agree with petrostructural observations. The magnetic planar and linear fabrics, which correspond to the preferred orientation of biotite and muscovite, are consistent with the foliation and lineation defined by the preferred mineral orientation. This fabric developed during pluton emplacement. The accordance of this granite foliation with that observed in the host rock, suggests that the Rocles pluton is a laccolith, but its present geometry resulted from post-emplacement southward tilting due to the uplift of the Late Carboniferous Velay dome. Restoration of the primary geometry of the pluton and its country-rocks to a flat-lying attitude places the granite lineation close to the trend measured in other plutons of the area. This restoration further supports the interpretation of the Rocles laccolith as a pluton emplaced along a tectonic contact reactivated during the late-orogenic collapse of the Variscan Belt.     

Metasomatism and melting history of a Variscan lithospheric mantle domain: evidence from the Puy Beaunit xenoliths (French Massif Central)

Mantle xenoliths from Puy Beaunit (French Massif Central) are compositionally varied, ranging from relatively fertile spinel lherzolites to refractory spinel dunites. Fertile peridotites have registered a modal (amphibole-bearing lherzolites) and cryptic metasomatic event that took place before the last Permian (257 Ma) melting episode. Depletion processes have been constrained by chemical modelling: the depletion is related to different degrees of partial melting, but two major melt extraction episodes are needed to explain the range of major element composition. The second event was responsible for the local large-scale dunitification of former residues. The first melting event (F25%) and metasomatic enrichment are attributed to an ancient fluid and/or liquid infiltration that could be related to a pre-Variscan regional subduction (located to the north of the Beaunit area). Texture acquisition and major deformation of the mantle xenoliths were sub-contemporaneous of the subduction and would result from lithospheric delamination. The second melting event (F17%) produced high-Mg basalts with calc-alkaline trace element signature that gave rise to the Permian underplating episode recognised in western Europe.     

青藏高原北部柴达木块体晚二叠世古地磁结果及其构造意义

通过对柴达木地块天峻县组合玛地区晚二叠世13个采点的系统古地磁测定,揭示了一组高温特征剩磁分量.实验结果表明,采样剖面获得的晚二叠世古地磁结果具有正、反极性,其特征剩磁方向为:Dg=333.7°,Ig=37.3°,Kg=35.4,N=9,α95 =8.8;Ds=333.9°,Is=41.7°,Ks=69.9,α95 =6.2°,相对应的古地磁极位置为:64.0°N,342.4°E,A95=5.9°,古纬度为24.0°N.这一高温分量通过了倒转检验,我们认为这一高温特征剩磁分量很可能代表了研究区晚二叠世时期的原生特征剩磁.通过对比塔里木地块晚石炭-晚二叠世古地磁结果,发现两块体在晚石炭世存在明显的古纬度差(16.6±9.3°),而在晚二叠世其古纬度差(3.5±5.4°)在古地磁误差范围内并没有明显差别,从构造意义上说,说明柴达木地块在晚二叠世已是塔里木地块的一部分,结合地质资料,认为柴达木地块在晚二叠世时古地理位置处于塔里木地块的南缘或西南缘,这表明柴达木/塔里木地块间的古阿尔金断裂的形成时代不可能早于晚石炭世时,很可能形成于晚二叠世以后.     

Late Variscan exhumation histories of the southern Rhenohercynian Zone and western Mid-German Crystalline Rise: results from thermal modeling

Thermal modeling techniques constrained by published petrological and thermo-chronometric data were applied to examine late orogenic burial and exhumation at a Variscan suture zone in Central Europe. The suture separates the southern Rhenohercynian zone from the Mid-German Crystalline Rise and traces the former site of a small oceanic basin. Closure of this basin during Variscan subduction and subsequent collision of continental units were responsible for different tectono-metamorphic evolutions in the suture's footwall and hanging wall. Relative convergence rates between the southern Rhenohercynian zone and western Mid-German Crystalline Rise can be inferred from the pressure-temperature-time evolution of the Northern Phyllite Zone. During Late Viséan-Early Namurian times, horizontal thrusting velocities were at least 20 mm/a. Thermal modeling suggests that exhumation of the Mid-German Crystalline Rise occurred temporarily at rates of more than 3 mm/a. Such rapid exhumation cannot be produced by erosion only, but requires a substantial contribution of extensional strain. Exhumation by upper crustal extension occurred contemporaneously with convergence and is explained by continuous underplating of crustal slices and thrusting along faults with ramp-flat geometry. Finally, implications for the tectono-metamorphic history of the study area and the thermal state of the crust during late Variscan exhumation are discussed.     

Timing and duration of partial melting and magmatism in the Variscan Montagne Noire gneiss dome (French Massif Central)

International Journal of Earth Sciences - Unravelling the detailed pressure–temperature–time-deformation (P–T–t-D) evolution of magmatic and metamorphic rocks provides...     

Ocean-floor hydrothermal metamorphism in the Limousin ophiolites (western French Massif Central): evidence of a rare preserved Variscan oceanic marker

The Limousin ophiolite is located at the suture zone between two major thrust sheets in the western French Massif Central. This ophiolitic section comprises mantle‐harzburgite, mantle‐dunite, wehrlites, troctolites and layered gabbros. It has recorded a static metamorphic event transforming the gabbros into undeformed amphibolites and the magmatic ultramafites into serpentinites and/or pargasite‐bearing chloritites. With various thermobarometric methods, it is possible to show that the different varieties of amphibole have registered low‐P (c. 0.2 GPa) conditions with temperature ranging from high‐T, late‐magmatic conditions to greenschist–zeolite metamorphic facies. The abundance of undeformed metamorphic rocks (which is typical of the lower oceanic crust), the occurrence of Ca–Al (–Mg) metasomatism illustrated by the growth of Ca–Al silicates in veins or replacing the primary magmatic minerals, the P–T conditions of the metamorphism and the numerous similarities with oceanic crustal rocks from Ocean Drilling Program and worldwide ophiolites are the main arguments for an ocean‐floor hydrothermal metamorphism in the vicinity of a palaeo‐ridge. Among the West‐European Variscan ophiolites, the Limousin ophiolites constitute an extremely rare occurrence that has not been involved in any HP (subduction‐related) or MP (orogenic) metamorphism as observed in other ophiolite occurrences (i.e. France, Spain and Germany).     

A new interpretation of Stephanian deformation in the Decazeville basin (Massif Central, France): consequences on late Variscan tectonism

Five stages of faulting were observed in and around the Stephanian Decazeville basin, in the SW French Massif Central, at the southern edge of the Sillon houiller fault. The older stage ends during middle Stephanian time, and corresponds to a strike-slip regime with N–S shortening and E–W extension. Before the end of the middle Stephanian, three other stages were recorded: two strike-slip regimes with NW–SE, then E–W compression and NE–SW, then N–S extension; and finally a NNE–SSW extensional regime during the main subsidence of the basin from the end of the middle Stephanian to late Stephanian. Based on mining documents, a new interpretation of the N–S striking folds of the Decazeville basin is proposed. Folding may not be associated with E–W compression but with diapirism of coal seams along syn-sedimentary normal faults during the extensional phase. A last strike-slip regime with N–S compression and E–W extension may be related to Cainozoic Pyrenean orogeny. At a regional scale, it is suggested that from the end of the middle Stephanian to the late Stephanian, the main faults in the Decazeville basin may represent a horsetail splay structure at the southern termination of the Sillon houiller fault.