Iron local structure in tektites and impact glasses by extended X-ray absorption fine structure and high-resolution X-ray absorption near-edge structure spectroscopy

The local structure of iron in three tektites has been studied by means of Fe K-edge extended X-ray absorption fine structure (EXAFS) and high-resolution X-ray absorption near-edge structure (XANES) spectroscopy in order to provide quantitative data on <Fe-O> distance and Fe coordination number. The samples studied are a moldavite and two australasian tektites. Fe model compounds with known Fe oxidation state and coordination number were used as standards in order to extract structural information from the XANES pre-edge peak. EXAFS-derived grand mean <Fe-O> distances and Fe coordination numbers for the three tektite samples are constant within the estimated error (<Fe-O > =2.00 Å ± 0.02 Å, CN = 4.0 ± 0.4). In contrast to other data from the literature on Fe-bearing silicate glasses, the tektites spectra could not be fitted with a single Fe-O distance, but rather were fit with two independent distances (2 × 1.92 Å and 2 × 2.08 Å). High-resolution XANES spectra of the three tektites display a pre-edge peak whose intensity is intermediate between those of staurolite and grandidierite, thus suggesting a mean coordination number intermediate between 4 and 5. Combining the EXAFS and XANES data for Fe, we infer the mean coordination number to be close to 4.5.Comparison of the tektites XANES spectra with those of a suite of different impact glasses clearly shows that tektites display a relatively narrow range of Fe oxidation state and coordination numbers, whereas impact glasses data span a much wider range of Fe oxidation states (from divalent to trivalent) and coordination numbers (from tetra-coordinated to esa-coordinated). These data suggest that the tektite production process is very similar for all the known strewn fields, whereas impact glasses can experience a wide variety of different temperature-pressure-oxygen fugacity conditions, leading to different Fe local structure in the resulting glasses. These data could be of aid in discriminating between tektite-like impact glasses and impact glasses sensu strictu.     

Experimental and theoretical study of the structural environment of magnesium in minerals and silicate glasses using X-ray absorption near-edge structure

X-ray absorption spectroscopy at the Mg K-edge is used to obtain information on magnesium environment in minerals, silicate and alumino-silicate glasses. First-principles XANES calculations are performed for minerals using a plane-wave density functional formalism with core-hole effects treated in a supercell approach. The good agreement obtained between experimental and theoretical spectra provides useful information to interpret the spectral features. With the help of calculation, the position of the first peak of XANES spectra is related to both coordination and polyhedron distortion changes. In alumino-silicate glasses, magnesium is found to be mainly 5-fold coordinated to oxygen whatever the aluminum saturation index value. In silicate glasses, magnesium coordination increases from 4 in Cs-, Rb- and K-bearing glasses to 5 in Na- and Li-bearing glasses but remains equal as the polymerization degree of the glass varies. The variation of the C feature (position and intensity) is strongly related to the alkali type providing information on the medium range order.

Chemical analysis for optimal synthesis of ferrihydrite-modified diatomite using soft X-ray absorption near-edge structure spectroscopy

Effects of process parameters such as concentrations of FeCl₂, NaOH, and drying temperature on the formation mechanism and chemical characteristics of ferrihydrite-modified diatomite are studied by using X-ray absorption near-edge structure spectroscopy. The spectra were recorded in total electron yield mode and/or fluorescence yield mode to investigate the chemical nature of Fe and Si on the surface and/or in the bulk of ferrihydrite-modified diatomite, respectively. It was found that only the surface SiO₂ was partially dissolved in the NaOH solution with stirring and heating, whereas the bulk of diatomite seemed to be preserved. The dissolved Si was incorporated into the structure of ferrihydrite to form the 2-line Si-containing ferrihydrite on the surface of diatomite. The crystalline degree of ferrihydrite increased with the increasing FeCl₂ concentration and the Brunauer–Emmett–Teller specific surface area of ferrihydrite-modified diatomite decreased with the increasing FeCl₂ concentration. The crystalline degree of ferrihydrite decreased with the increase of NaOH concentration. The high temperature calcination caused an energy shift in the Si L-edge spectra to the high energy side and a transformation of Si-containing ferrihydrite to crystallized hematite might occur when ferrihydrite-modified diatomite is calcined at 900°C. In this study, the optimal synthesis conditions for the ferrihydrite-modified diatomite with the least crystalline Si-containing ferrihydrite and the highest surface area were found to be as the follows: 0.5 M FeCl₂ solution, 6 M NaOH solution and drying temperature of 50°C.     

High-pressure behaviour of germanate olivines studied by X-ray diffraction and X-ray absorption spectroscopy

Germanate olivines Mg₂GeO₄, Ca₂GeO₄ and CaMgGeO₄ have been studied by high-pressure X-ray Diffraction and high-pressure X-ray Absorption Spectroscopy. The three compounds were compressed, in the 0–30 GPa pressure range, at room temperature in a diamond-anvil cell, silicon oil being used as the pressure transmitting medium. Values of K₀ are 166 ± 15, 117 ± 15 and 152 ± 14 GPa for Mg₂GeO₄, Ca₂GeO₄ and CaMgGeO₄ respectively. These olivines all exhibit compression anisotropy, the a axis being the least compressible. Crystal to crystal phase transitions have been observed in Mg₂GeO₄ and Ca₂GeO₄ above 12 GPa and 6 Gpa respectively. The nature of these structural changes remains unclear yet. The onset of amorphization has been observed in Mg₂GeO₄ and Ca₂GeO₄ at pressures above about 22 and 11 GPa respectively. These phase transitions and amorphization processes do not involve any detectable increase in the coordination number of germanium atoms. At higher pressure (P >23 GPa), we report the onset of a transition from a phase with fourfold coordinated germanium to a phase with higher germanium coordination number in CaMgGeO₄.     

同步辐射软X射线吸收谱与发射谱测定天然针铁矿能带结构

天然半导体矿物由于成分、缺陷复杂,传统测试方法如紫外可见漫反射等难以准确测定其禁带宽度.本文以针铁矿为例,通过第一性原理计算得到纯针铁矿及掺Al针铁矿的电子结构.计算结果显示,纯针铁矿导带底与价带顶均由Fe3d与O2p轨道组成,而当含杂质Al时,Al2p与O2p发生杂化参与了价带组成.在此基础上,利用同步辐射X射线氧的K边吸收谱与发射谱对纯针铁矿及天然针铁矿的能带结构进行了测定.结果表明,天然含Al的针铁矿禁带宽度为2.30eV,小于纯针铁矿(2.57eV).本研究提供了一种测定天然氧化物矿物禁带宽度的新方法,为深入研究天然半导体可见光催化活性产生机制提供了理论依据.     

Flotation and depression control of arsenopyrite through pH and pulp redox potential using xanthate as the collector

The role of pH and pulp redox potential (E_H) to control the flotation and depression of arsenopyrite has been investigated through studies on microflotation of arsenopyrite crystals and batch flotation of an arsenopyritic ore using isopropyl xanthate as collector. The transition between flotation and depression of arsenopyrite is established by the reversible potential of the xanthate/dixanthogen couple. Adsorption of arsenate ions on ferric hydroxide has been studied through electrokinetics to delineate mechanisms involved in the depression of arsenopyrite using oxidants. Chemical binding between arsenate species and ferric hydroxide sites on arsenopyrite is suggested as the mechanism responsible for depression of arsenopyrite. E_H conditions are given for the flotation and depression of arsenopyite at various pH values for the arsenopyritic ore.     

Coordination chemistry and hydrolysis of Fe(III) in a peat humic acid studied by X-ray absorption spectroscopy

The speciation of iron (Fe) in soils, sediments and surface waters is highly dependent on chemical interactions with natural organic matter (NOM). However, the molecular structure and hydrolysis of the Fe species formed in association with NOM is still poorly described. In this study extended X-ray absorption fine structure (EXAFS) spectroscopy was used to determine the coordination chemistry and hydrolysis of Fe(III) in solution of a peat humic acid (5010-49,200 μg Fe g⁻¹ dry weight, pH 3.0-7.2). Data were analyzed by both conventional EXAFS data fitting and by wavelet transforms in order to facilitate the identification of the nature of backscattering atoms. Our results show that Fe occurs predominantly in the oxidized form as ferric ions and that the speciation varies with pH and Fe concentration. At low Fe concentrations (5010-9920 μg g⁻¹; pH 3.0-7.2) mononuclear Fe(III)-NOM complexes completely dominates the speciation. The determined bond distances for the Fe(III)-NOM complexes are similar to distances obtained for Fe(III) complexed by desferrioxamine B and oxalate indicating the formation of a five-membered chelate ring structure. At higher Fe concentrations (49,200 μg g⁻¹; pH 4.2-6.9) we detect a mixture of mononuclear Fe(III)-NOM complexes and polymeric Fe(III) (hydr)oxides with an increasing amount of Fe(III) (hydr)oxides at higher pH. However, even at pH 6.9 and a Fe concentration of 49,200 μg g⁻¹ our data indicates that a substantial amount of the total Fe (>50%) is in the form of organic complexes. Thus, in environments with significant amounts of organic matter organic Fe complexes will be of great importance for the geochemistry of Fe. Furthermore, the formation of five-membered chelate ring structures is in line with the strong complexation and limited hydrolytic polymerization of Fe(III) in our samples and also agrees with EXAFS derived structures of Fe(III) in organic soils.     

Coordination nature of aluminum (oxy)hydroxides formed under the influence of tannic acid studied by X-ray absorption spectroscopy

The effect of biomolecules on the mechanisms of the formation and nature of the transformation products of Al (oxy)hydroxides at the atomic and molecular levels and the impact on their nano-scale surface chemistry remain to be uncovered. In this article, the coordination structure of Al in Al (oxy)hydroxides formed under the influence of tannic acid was studied with X-ray absorption near edge structure (XANES) spectroscopy. Al K-edge and L-edge spectra show that as the tannate/Al molar ratio (MR) was increased from 0, 0.001, 0.01 to 0.1, the coordination number of Al changed from the sixfold coordination to mixed six-, five-, and/or fourfold coordination in the structural network of the Al (oxy)hydroxides formed under the increasing perturbation of tannic acid. In O K-edge spectra, the intensity of the peak assigned to the π^∗ at 532.1 eV increased as the tannate/Al MR increased, with the spectrum of the Al precipitate formed at a tannate/Al MR of 0.1 being almost identical to that of tannic acid. These results indicate that tannate ligands are incorporated into the structural network of short-range ordered Al (oxy)hydroxides to perturb their structural configuration during the formation of Al precipitates under the influence of tannic acid. With increasing tannate/Al MR, the Al (oxy)hydroxides decreased in amount and developed structural defects and the Al-tannate precipitates increased in amount. The decrease in the coordination number of Al in the Al (oxy)hydroxides is attributed to steric and electronic factors which cause the change in Al-O bonding, because Al is complexed with tannate which has different functional groups and is much larger in size compared with OH and H₂O ligands. The surface reactivity of a metal-O bond is related to its covalency and coordination geometry. The findings obtained in the present study are, thus, of fundamental significance in understanding the structural and surface chemistry of Al (oxy)hydroxides and their impact on the transformation, transport, and fate of nutrients and pollutions in the environment.     

An X-ray absorption spectroscopy study of the structure and reversibility of copper adsorbed to montmorillonite clay

X-ray absorption spectroscopy (XAS) and adsorption-desorption measurements have been performed to assess the relationship between the structure and reversibility of copper complexes on montmorillonite clay. By varying the solution pH and background electrolyte concentration, the adsorption of copper on either the edge sites or permanent charge sites of montmorillonite was controlled. This allowed the structure and reversibility of copper complexes on each of these site types to be assessed independently of each other. XAS analysis of copper adsorbed on the permanent charge sites indicated outer-sphere surface complexes, with these complexes showing sorption reversibility. For copper complexes formed on the edge sites of montmorillonite, XAS data confirmed the presence of monomer and dimer copper surface complexes. Sorption irreversibility at edge sites was noted at copper coverages less than 20 μmoles/g clay at pH=4.2 and at coverages greater than 50 μmoles/g clay at pH=6.8. At pH=6.8, higher Cu-Cu coordination numbers indicated the copper sorption irreversibility may be due, in part, to the formation of dimer surface complexes. The coordination numbers at pH=4.2 indicated the irreversibility could be due to the formation of dimers or due to formation of surface complexes on high energy edge sites.     

Selective detection of Fe and Mn species at mineral surfaces in weathered granite by conversion electron yield X-ray absorption fine structure

A new method for the speciation of Fe and Mn at mineral surfaces is proposed using X-ray absorption fine structure in conversion electron yield mode (CEY-XAFS). This method generally reflects information on the species at the sub-μm scale from the particle surface due to the limited escape depth of the inelastic Auger electron. The surface sensitivity of this method was assessed by experiments on two samples of granite showing different degrees of weathering. The XANES spectra of the Fe-K and Mn-K edge clearly gave different information for CEY and fluorescence (FL) modes. These XANES spectra of Fe and Mn show a good fit upon application of least-squares fitting using ferrihydrite/MnO₂ and biotite as the end members. The XANES spectra collected by CEY mode provided more selective information on the secondary phases which are probably present at the mineral surfaces. In particular, CEY-XANES spectra of Mn indicated the presence of Mn oxide in unweathered granite despite a very small contribution of Mn oxide being indicated by FL-XANES and selective chemical-extraction analyses. Manganese oxide could not be detected by micro-beam XANES (beam size: 5 × 5 μm²) in unweathered granite, suggesting that Mn oxide thinly and ubiquitously coats mineral surface at a sub-μm scale. This information is important, since Mn oxide can be the host for various trace elements. CEY-XAFS can prove to be a powerful tool as a highly sensitive surface speciation method. Combination of CEY and FL-XAFS will help identify minor phases that form at mineral surfaces, but identification of Fe and Mn oxides at mineral surfaces is critical to understand the migration of trace elements in water-rock interaction.     

X-ray absorption spectroscopy study on the effect of hydroxybenzoic acids on the formation and structure of ferrihydrite

Organic ligands are known to interfere with the polymerization of Fe(III), but the extent of interference has not been systematically studied as a function of structural ligand properties. This study examines how the number and position of phenol groups in hydroxybenzoic acids affect both ferrihydrite formation and its local (<5 Å) Fe coordination. To this end, acid Fe(III) nitrate solutions were neutralized up to pH 6.0 in the presence of 4-hydroxybenzoic acid (4HB), 2,4-dihydroxybenzoic acid (2,4DHB), and the hydroquinone 3,4-dihydroxybenzoic acid (3,4DHB). The initial molar ligand/Fe ratios ranged from 0 to 0.6. The precipitates were dialyzed, lyophilized, and subsequently studied by X-ray absorption spectroscopy and synchrotron X-ray diffraction. The solids contained up to 32 wt.% organic C (4HB ∼ 2,4DHB < 3,4DHB). Only precipitates formed in 3,4DHB solutions comprised considerable amounts of Fe(II) (Fe(II)/Fe_tot ≤ 6 mol%), implying the abiotic mineralization of the catechol-group bearing ligand during Fe(III) hydrolysis under oxic conditions. Hydroxybenzoic acids decreased ferrihydrite formation in the order 4HB ∼ 2,4DHB ? 3,4DHB, which documents that phenol group position rather than the number of phenol groups controls the ligand’s interaction with Fe(III). The coordination numbers of edge- and double corner-sharing Fe in the precipitates decreased by up to 100%. Linear combination fitting (LCF) of Fe K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra revealed that this decrease was due to increasing amounts of organic Fe(III) complexes in the precipitates. Although EXAFS derived coordination numbers of Fe in ferrihydrite remained constant within error, all organic ligands decreased the coherently scattering domain (CSD) size of ferrihydrite as indicated by synchrotron X-ray diffraction analysis (4HB < 2,4DHB ? 3,4DHB). With decreasing particle size of ferrihydrite its Fe(O,OH)₆ octahedra became progressively distorted as evidenced by an increasing loss of centrosymmetry of the Fe sites. Pre-edge peak analysis of the Fe K-edge XANES spectra in conjunction with LCF results implied that ferrihydrite contains on an average 13 ± 3% tetrahedral Fe(III), which is in very good agreement with the revised single-phase structural model of ferrihydrite (Michel, F. M., Barron, V., Torrent, J., Morales, M. P. et al. (2010) Ordered ferrimagnetic form of ferrihydrite reveals links among structure, composition, and magnetism. Proc. Natl. Acad. Sci. USA107, 2787-2792). The results suggest that hydroxybenzoic acid moieties of natural organic matter (NOM) effectively suppress ferrihydrite precipitation as they kinetically control the availability of inorganic Fe(III) species for nucleation and/or polymerization reactions. As a consequence, NOM can trigger the formation of small ferrihydrite nanoparticles with increased structural strain. These factors may eventually enhance the biogeochemical reactivity of ferrihydrite formed in NOM-rich environments. This study highlights the role of hydroquinone structures of NOM for Fe complexation, polymerization, and redox speciation.     

Structure and specification of iron complexes in aqueous solutions determined by X-ray absorption spectroscopy

X-ray absorption spectroscopy, including extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) techniques, have been used to determine the structure and speciation of complexes for Fe²⁺ and Fe³⁺ chloride solutions at a variety of pH's, ionic strengths, and chloride/iron ratios.Low intensity K-edge transition features and analysis of modified pair correlation functions, derived from Fourier transformation of EXAFS spectra, show a regular octahedral coordination of Fe(II) by water molecules with a first-shell Fe²⁺-O bond distance, closely matching octahedral Fe²⁺-O bonds obtained from solid oxide model compounds. Solution Fe²⁺-O bond distances decrease with chloride/iron ratio, pH, and total FeCl₂ concentration. A slight intensification of the $\text{1s → 3d}$ transition with increasing FeCl₂ concentration suggests that chloride may begin to mix with water as a nearest-neighbor octahedral ligand. Fe³⁺ solutions show a pronounced increase in the $\text{1s → 3d}$ transition intensities between 1.0 M FeCl₃/7.8 M Cl^? to 1.0 M FeCl₃/ 15 M Cl^?, indicating a coordination change from octahedral to tetrahedral complexes. EXAFS analyses of these solutions show an increase in first-shell Fe³⁺-ligand distances despite this apparent reduction in coordination number. This can be best explained by a change from regular octahedral complexes of ferric iron (either Fe(H₂O)₆³⁺ or trans-Fe(H₂O)₄Cl₂ or both; Fe³⁺-O bond distances of 2.10 Å) to tetra-chloro complexes [Fe³⁺-Cl bond distances of 2.25 Å].     

An X-ray absorption fine structure and nuclear magnetic resonance spectroscopy study of gallium-silica complexes in aqueous solution

The influence of aqueous silica on gallium(III) hydrolysis in dilute (2 × 10⁻⁴ ≤ m_Ga ≤ 5 × 10⁻³) and moderately concentrated (0.02 ≤ m_Ga ≤ 0.3) aqueous solutions was studied at ambient temperature, using high resolution X-ray absorption fine structure (XAFS) and nuclear magnetic resonance (NMR) spectroscopies, respectively. Results show that, in Si-free acidic solutions (pH < 3), Ga is hexa-coordinated with oxygens of H₂O molecules and/or OH groups in the first coordination sphere of the metal. With increasing pH, these hydroxyl groups are progressively replaced by bridging oxygens (-O-), and polymerized Ga-hydroxide complexes form via Ga-O-Ga chemical bonds. In the 2.5-3.5 pH range, both XAFS and NMR spectra are consistent with the dominant presence of the Ga₁₃ Keggin polycation, which has the same local structure as A1₁₃. Under basic pH (pH > 8), Ga exhibits a tetrahedral coordination, corresponding to Ga(OH)₄⁻ species, in agreement with previous NMR and potentiometric studies. Major changes in Ga hydrolysis have been detected in the presence of aqueous silica. Ga is tetra-coordinated, both in basic and acid (i.e., at pH > 2.7) Si-bearing solutions (0.01 ≤ m_Si ≤ 0.2), and forms stable gallium-silicate complexes. In these species, Ga binds via bridging oxygen to 2 ± 1 silicons, with an average Ga-Si distance of 3.16 ± 0.05 Å, and to 2 ± 1 silicons, with an average Ga-Si distance of 3.39 ± 0.03 Å. These two sets of Ga-Si distances imply the formation of two types of Ga-silicate aqueous complex, cyclic Ga-Si_2-3 species (formed by the substitution of Si in its tri-, tetra- or hexa-cyclic polymers by Ga atoms), and chainlike GaSi_2-4 species (similar to those found for A1), respectively. The increase in the number of Si neighbors (a measure of the complex concentration and stability), in alkaline media, with increasing SiO₂(aq) content and decreasing pH is similar to that for A1-Si complexes found in neutral to basic solutions. At very acid pH and moderate silica concentrations, the presence of another type of Ga-Si complex, in which Ga remains hexa-coordinated and binds to the silicon tetrahedra via the GaO₆ octahedron corners, has also been detected. These species are similar to those found for Al³⁺ in acid solutions. Thus, as for aluminum, silicic acid greatly hampers Ga hydrolysis and enhances Ga mobility in natural waters via the formation of gallium-silicate complexes.     

Graphitization of Korean anthracites as studied by transmission electron microscopy and X-ray diffraction

The different modes of high-resolution transmission electron microscopy (TEM) were applied to Korean anthracites, semi-graphites and graphites. Whereas X-ray diffraction data yield averaged values, TEM is the only technique able to bring out the heterogeneity of phases which are different in morphology and in microtexture. The thermal behavior of samples was studied using laboratory heat-treatments up to 2800°C. In heat-treated anthracites for example, an increasing degree of graphitization results in phase changes which can be quantified by TEM. The study of a larger sampling appears however necessary to relate crystallographic variations to geological data.     

The oxidation state of sulfur in synthetic and natural glasses determined by X-ray absorption spectroscopy

Sulfur K-edge X-ray absorption near edge structure (XANES) spectra were recorded for experimental glasses of various compositions prepared at different oxygen fugacities (fO₂) in one-atmosphere gas-mixing experiments at 1400 °C. This sample preparation method only results in measurable S concentrations under either relatively reduced (log fO₂ < −9) or oxidised (log fO₂ > −2) conditions. The XANES spectra of the reduced samples are characterised by an absorption edge crest at 2476.4 eV, typical of S²⁻. In addition, spectra of Fe-bearing compositions exhibit a pronounced absorption edge shoulder. Spectra for all the Fe-free samples are essentially identical, as are the spectra for the Fe-bearing compositions, despite significant compositional variability within each group. The presence of a sulfide phase, such as might exsolve on cooling, can be inferred from a pre-edge feature at 2470.5 eV.The XANES spectra of the oxidised samples are characterised by an intense transition at 2482.1 eV, typical of the sulfate anion SO₄²⁻. Sulfite (SO₃²⁻) has negligible solubility in silicate melts at low pressures. The previous identification of sulfite species in natural glass samples is attributed to an artefact of the analysis (photoreduction of S⁶⁺). S⁴⁺ does, however, occur unambiguously with S⁶⁺ in Fe-free and Fe-poor compositions prepared in equilibrium with CaSO₄ at 4-16 kbar, and when buffered with Re/ReO₂ at 10 kbar. Solubility of S⁴⁺ thus requires partial pressures of SO₂ considerably in excess of 1 bar. A number of experiments were undertaken in an attempt to access intermediate fO₂s more applicable to terrestrial volcanism. Although these were largely unsuccessful, S²⁻ and S⁶⁺ were found to coexist in some samples that were not in equilibrium with the imposed fO₂.The XANES spectra of natural olivine-hosted melt inclusions and submarine glasses representative of basalts at, or close to, sulfide saturation show mainly dissolved S²⁻, but with minor sulfate, and additionally a peak at 2469.5 eV, which, although presumably due to immiscible sulfide, is 1 eV lower than that typical of FeS. These sulfate and sulfide-related peaks disappear with homogenisation of the inclusions by heating to 1200 °C followed by rapid quenching, suggesting that both these features are a result of cooling under natural conditions. The presence of small amounts of sulfate in otherwise reduced basaltic magmas may be explained by the electron exchange reaction: S²⁻ + 8Fe³⁺ = S⁶⁺ + 8Fe²⁺, which is expected to proceed strongly to the right with decreasing temperature. This reaction would explain why S²⁻ and S⁶⁺ are frequently found together despite the very limited fO₂ range over which they are thermodynamically predicted to coexist. The S XANES spectra of water-rich, highly oxidised, basaltic inclusions hosted in olivine from Etna and Stromboli confirm that nearly all S is dissolved as sulfate, explaining their relatively high S contents.     

Neoformation of Ni phyllosilicate upon Ni uptake on montmorillonite: A kinetics study by powder and polarized extended X-ray absorption fine structure spectroscopy

Wet chemistry kinetics and powder and polarized extended X-ray absorption fine structure (EXAFS and P-EXAFS) spectroscopy were combined to investigate the mechanism of Ni uptake on montmorillonite, at pH 8, high ionic strength (0.2 M Ca(NO₃)₂), initial Ni concentration of 660 μM, and solid concentration of 5.3 g/L. Approximately 20% of Ni sorbed within the first 24 h; thereafter, the Ni uptake rate slowed, and 12% of the initial Ni concentration remained in solution after 206 d of reaction time. Powder EXAFS spectra collected on wet pastes at 1, 14, 90, and 206 d showed the presence of Ni-Ni pairs at ∼3.08 Å in an amount that gradually increased with time. Results were interpreted by the nucleation of a Ni phase having either an α-Ni-hydroxide- or a Ni-phyllosilicate-like local structure. The latter possibility was confirmed by recording P-EXAFS spectra of a highly textured, self-supporting montmorillonite film prepared in the same conditions as the wet samples and equilibrated for 14 d. The orientation distribution of the c*-axes of individual clay particles off the film plane, as measured by quantitative texture analysis, was 32.8° full width at half maximum, and this value was used to correct from texture effect the effective numbers of Ni and Si nearest neighbors determined by P-EXAFS. Ni atoms were found to be surrounded by 2.6 ± 0.5 Ni atoms at 3.08 Å in the in-plane direction and by 4.2 ± 0.5 Si atoms at 3.26 Å in the out-of-plane direction. These structural parameters, but also the orientation and angular dependence of the Ni and Si shells, strongly support the formation of a Ni phyllosilicate having its layers parallel to the montmorillonite layers. The neoformation of a phyllosilicate on metal uptake on montmorillonite, documented herein for the first time, has important geochemical implications because this dioctahedral smectite is overwhelmingly present in the environment. The resulting sequestration of sorbed trace metals in sparingly soluble phyllosilicate structure may durably decrease their migration and bioavailability at the Earth’s surface and near surface.     

Coordination nature of aluminum (oxy)hydroxides formed under the influence of low molecular weight organic acids and a soil humic acid studied by X-ray absorption spectroscopy

Organic ligands in the environment hinder the formation of crystalline Al precipitation products by perturbing the hydrolytic and polymeric reactions of Al resulting in the formation of short-range ordered (SRO) mineral colloids with varying degrees of crystallinity. However, the effect of these ligands on the mechanisms of their formation and nature of the transformation products of Al (oxy)hydroxides at the atomic and molecular levels is not well understood. In this study, the coordination structure of Al in Al (oxy)hydroxides formed under the influence of varying concentrations of low molecular weight (LMW) organic acids such as citric, malic, salicylic and acetic acids and a humic acid (HA) was investigated with X-ray absorption near edge structure (XANES) spectroscopy, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction analysis. The Al K- and L-edge XANES spectra showed that with increasing LMW organic acid concentration the coordination number of Al changed from 6-fold to a mixture of 4- and 6-fold, except for acetate as acetate was unable to perturb the formation of Al (oxy)hydroxides at the acetate/Al molar ratio (MR) = 0.1. The proportion of 4-fold to 6-fold coordinated Al in the Al precipitation products depended on the structure and functionality of the LMW organic acids. The incorporation of the LMW organic acid into the network structure of Al (oxy)hydroxides prevented the formation of sheets/inter-layer H-bonding that was required for the formation of crystalline Al (oxy)hydroxides. The HA used in this study only slightly perturbed the crystallization of the Al (oxy)hydroxides at the concentrations used. The Al K-edge data showed that Al coordination number had not been altered in the presence of HA. The findings obtained in the present study are of fundamental significance in understanding the physicochemical behavior of soils and sediments, and their relation to the accumulation and transport of nutrients and pollutants in the environment.     

Oxidation state and electronic configuration determination of copper in tetrahedrite group minerals by L-edge X-ray absorption spectroscopy

L-edge X-ray absorption spectroscopy employing a synchrotron radiation source has been used to study the electronic structure and valency of Cu in the chemically and structurally complex tetrahedrite group of minerals. Mechanical mixtures of Cu²⁺O and Cu⁺FeS₂ were used to estimate the relative cross sections of Cu²⁺ and Cu⁺; the absorption of Cu²⁺ at 931 eV is 25 times greater than that of Cu⁺ at 945 eV. Using this calibration, Cu²⁺/Cu ratios were found to vary from 0.00 to 0.054 in the tetrahedrite samples studied; the highest proportion of Cu²⁺ occurs in synthetic tetrahedrites with a composition close to Cu₁₂Sb₄S₁₃. This study reveals the utility of the technique for determining the valence state of copper in complex minerals, allowing the crystal chemistry to be more fully characterised.     

Structure of heavy metal sorbed birnessite. Part III: Results from powder and polarized extended X-ray absorption fine structure spectroscopy

The local structures of divalent Zn, Cu, and Pb sorbed on the phyllomanganate birnessite (Bi) have been studied by powder and polarized extended X-ray absorption fine structure (EXAFS) spectroscopy. Metal-sorbed birnessites (MeBi) were prepared at different surface coverages by equilibrating at pH 4 a Na-exchanged buserite (NaBu) suspension with the desired aqueous metal. Me/Mn atomic ratios were varied from 0.2% to 12.8% in ZnBi and 0.1 to 5.8% in PbBi. The ratio was equal to 15.6% in CuBi. All cations sorbed in interlayers on well-defined crystallographic sites, without evidence for sorption on layer edges or surface precipitation. Zn sorbed on the face of vacant layer octahedral sites (□), and shared three layer oxygens (O_layer) with three-layer Mn atoms (Mn_layer), thereby forming a tridentate corner-sharing (TC) interlayer complex (Zn-3O_layer-□-3Mn_layer). ^TCZn complexes replace interlayer Mn²⁺ (Mn_inter²⁺) and protons. ^TCZn and ^TCMn_inter³⁺ together balance the layer charge deficit originating from Mn_layer⁴⁺ vacancies, which amounts to 0.67 charge per total Mn according to the structural formula of hexagonal birnessite (HBi) at pH 4. At low surface coverage, zinc is tetrahedrally coordinated to three O_layer and one water molecule (^[IV]TC complex: (H₂O)-^[IV]Zn-3O_layer). At high loading, zinc is predominantly octahedrally coordinated to three O_layer and to three interlayer water molecules (^[VI]TC complex: 3(H₂O)-^[VI]Zn-3O_layer), as in chalcophanite (^[VI]ZnMn₃⁴⁺O₇·3H₂O). Sorbed Zn induces the translation of octahedral layers from −a/3 to +a/3, and this new stacking mode allows strong H bonds to form between the ^[IV]Zn complex on one side of the interlayer and oxygen atoms of the next Mn layer (O_next): O_next…(H₂O)-^[IV]Zn-3O_layer. Empirical bond valence calculations show that O_layer and O_next are strongly undersaturated, and that ^[IV]Zn provides better local charge compensation than ^[VI]Zn. The strong undersaturation of O_layer and O_next results not only from Mn_layer⁴⁺ vacancies, but also from Mn³⁺ for Mn⁴⁺ layer substitutions amounting to 0.11 charge per total Mn in HBi. As a consequence, ^[IV]Zn,Mn_layer³⁺, and Mn_next³⁺ form three-dimensional (3D) domains, which coexist with chalcophanite-like particles detected by electron diffraction. Cu²⁺ forms a Jahn-Teller distorted ^[VI]TC interlayer complex formed of two oxygen atoms and two water molecules in the equatorial plane, and one oxygen and one water molecule in the axial direction. Sorbed Pb²⁺ is not oxidized to Pb⁴⁺ and forms predominantly ^[VI]TC interlayer complexes. EXAFS spectroscopy is also consistent with the formation of tridentate edge-sharing (^[VI]TE) interlayer complexes (Pb-3O_layer-3Mn), as in quenselite (Pb²⁺Mn³⁺O₂OH). Although metal cations mainly sorb to vacant sites in birnessite, similar to Zn in chalcophanite, EXAFS spectra of MeBi systematically have a noticeably reduced amplitude. This higher short-range structural disorder of interlayer Me species primarily originates from the presence of Mn_layer³⁺, which is responsible for the formation of less abundant interlayer complexes, such as ^[IV]Zn TC in ZnBi and ^[VI]Pb TE in PbBi.     

Theoretical analysis of X-ray absorption near-edge structure in forsterite, Mg2SiO4-Pbnm, and fayalite, Fe2SiO4-Pbnm, at room temperature and extreme conditions

We calculated the forsterite Mg K-edge and the fayalite Fe K-edge X-ray absorption spectra both for the M 1 and M 2 sites and for the overall edge by using the one-electron multiple-scattering theory. The validity of the theoretical model is well illustrated by comparison of calculations with experimental data at the Mg K-edge of MgO (periclase) and at the Mg and Fe K-edges spectra of forsterite and fayalite. Starting from these results at room conditions, we calculated the Mg and Fe K-edges X-ray absorption spectra of forsterite and fayalite at low and high temperatures and at high pressures as well. Variations of fine structures occur mostly in the intermediate multiple scattering (IMS) regions and as a result of the applied pressure. In order to demonstrate the capability of XAS to lead to deeper knowledge of structure relevant to Earth's upper mantle we also attempted calcuating the high-P edge for Fe ²⁺ in low-spin using a different occupation of valence electrons. If a change in spin state really occurs in fayalite, our simple model shows that XAS would evidence it easily even with low resolution.