Sapphirine-bearing granulites and related high-temperature metamorphic rocks from the Higo metamorphic terrane, west-central Kyushu, Japan

The Higo metamorphic unit in west-central Kyushu island, southwest Japan is an imbricated crustal section in which a sequence of units with increasing metamorphic grade from high (northern part) to low (southern part) structural levels is exposed. The basal part of the metamorphic sequence representing an original depth of 23–24  km consists mainly of garnet–cordierite–biotite gneiss, garnet–orthopyroxene gneiss, orthopyroxene-bearing amphibolite and orthopyroxene-bearing S-type tonalite. These metamorphic rocks underwent high amphibolite-facies up to granulite facies metamorphism with peak P – T  conditions of 720  MPa, 870  °C. In addition sapphirine-bearing granulites and related high-temperature metamorphic rocks also occur as tectonic blocks in a metamorphosed peridotite intrusion. The sapphirine-bearing granulites and their related high-temperature metamorphic rocks can be subdivided into five types of mineral assemblages reflecting their bulk chemical compositions as follows: (1) sapphirine–corundum–spinel–cordierite (2) corundum–spinel–cordierite (3) garnet–corundum–spinel–cordierite (4) garnet–spinel–gedrite–corundum, and (5) orthopyroxene–spinel–gedrite. These metamorphic rocks are characterized by unusually high Al₂O₃ and low SiO₂ contents, which could represent a restitic nature remaining after partial melting of pelitic granulite under the ultra high-temperature contact metamorphism at the peak metamorphic event of the Higo metamorphic unit. The metamorphic conditions are estimated to be about 800  MPa and above 950  °C which took place at about 250  Ma as a result of the thermal effect of the regional gabbroic rock intrusions.     

Proterozoic granulite facies metamorphism in the southeastern Reynolds Range, central Australia: geological context, P–T path and overprinting relationships

In the southeastern Reynolds Range, central Australia, a low- P granulite facies metamorphism affected two sedimentary sequences: the Lander Rock Beds and the Reynolds Range Group. In the context of the whole of the Reynolds Range and the adjacent Anmatjira Range, this metamorphism is M3 in a sequence M1–4 that occurred over a period of 250 Ma. In particular, M1 affected the Lander Rock Beds prior to the deposition of the Reynolds Group. M3 has an areally restricted, high-grade area in the southeastern Reynolds Range, affecting both the Reynolds Range Group and the underlying Lander Rock Beds. The effects of M3 are characterized by spinel + quartz-bearing peak metamorphic assemblages in metapelites, which imply peak conditions of ≥750°C and 4.5 ± 1 kbar, and involved isobaric cooling or compression with cooling. It is concluded that one of a series of thermal perturbations caused by thinning of mantle lithosphere contemporaneous with crustal thickening was responsible for M3. In the southeastern Reynolds Range, evidence of both the unconformity between the two rock groups and previous metamorphism/deformation has been completely erased by recrystallization during M3–D3.     

Low-P–high-T metamorphism and the role of heat transport by melt migration in the Higo Metamorphic Complex, Kyushu, Japan

This paper characterizes the metamorphic thermal structure of the Higo Metamorphic Complex (HMC) and presents the results of a numerical simulation of a geotherm with melt migration and solidification. Reconstruction of the geological and metamorphic structure shows that the HMC initially had a simple thermal structure where metamorphic temperatures and pressures increased towards apparent lower structural levels. Subsequently, this initial thermal structure has been collapsed by E–W and NNE–SSW trending high‐angle faults. Pressure and temperature conditions using the analysis of mineral assemblages and thermobarometry define a metamorphic field P–T array that may be divided into two segments: the array at apparent higher structural levels has a low‐dP/dT slope, whereas that at apparent lower structural levels has a high‐dP/dT slope. This composite array cannot be explained by heat conduction in subsolidus rocks alone. Migmatite is exposed pervasively at apparent lower structural levels, but large syn‐metamorphic plutons are absent at the levels exposed in the HMC. Transport and solidification of melt within migmatite is a potential mechanism to generate the composite array. Thermal modelling of a geotherm with melt migration and solidification shows that the composite thermal structure may be formed by a change of the dominant heat transfer from an advective regime to a conduction regime with decreasing depth. The model also predicts that strata beneath the crossing point will consist of high‐grade solid metamorphic rocks and solidified melt products, such as migmatite. This prediction is consistent with the observation that migmatite was associated with the very high‐dP/dT slope. The melt migration model is able to generate the very high‐dP/dT segment due to the high rate of heat transfer by advection.     

The Higo metamorphic complex in Kyushu, Japan as the fragment of Permo–Triassic metamorphic complexes in East Asia

The Higo terrane in west-central Kyushu Island, southwest Japan consists from north to south of the Manotani, Higo and Ryuhozan metamorphic complexes, which are intruded by the Higo plutonic complex (Miyanohara tonalite and Shiraishino granodiorite).The Higo and Manotani metamorphic complexes indicate an imbricate crustal section in which a sequence of metamorphic rocks with increasing metamorphic grade from high (northern part) to low (southern part) structural levels is exposed. The metamorphic rocks in these complexes can be divided into five metamorphic zones (zone A to zone E) from top to base (i.e., from north to south) on the basis of mineral parageneses of pelitic rocks. Greenschist-facies mineral assemblages in zone A (the Manotani metamorphic complex) give way to amphibolite-facies assemblages in zones B, C and D, which in turn are replaced by granulite-facies assemblages in zone E of the Higo metamorphic complex. The highest-grade part of the complex (zone E) indicates peak P–T conditions of ca. 720 MPa and ca. 870 °C. In addition highly aluminous Spr-bearing granulites and related high-temperature metamorphic rocks occur as blocks in peridotite intrusions and show UHT-metamorphic conditions of ca. 900 MPa and ca. 950 °C. The prograde and retrograde P–T evolution paths of the Higo and Manotani metamorphic complexes are estimated using reaction textures, mineral inclusion analyses and mineral chemistries, especially in zones A and D, which show a clockwise P–T path from Lws-including Pmp–Act field to Act–Chl–Epi field in zone A and St–Ky field to And field through Sil field in zone D.The Higo metamorphic complex has been traditionally considered to be the western-end of the Ryoke metamorphic belt in the Japanese Islands or part of the Kurosegawa–Paleo Ryoke terrane in south-west Japan. However, recent detailed studies including Permo–Triassic age (ca. 250 Ma) determinations from this complex indicate a close relationship with the high-grade metamorphic terranes in eastern-most Asia (e.g., north Dabie terrane) with similar metamorphic and igneous characteristics, protolith assembly, and metamorphic and igneous ages. The north Dabie high-grade terrane as a collisional metamorphic zone between the North China and the South China cratons could be extended to the N-NE along the transcurrent fault (Tan-Lu Fault) as the Sulu belt in Shandong Peninsula and the Imjingang belt in Korean Peninsula. The Higo and Manotani metamorphic complexes as well as the Hida–Oki terrane in Japan would also have belonged to this type of collisional terrane and then experienced a top-to-the-south displacement with forming a regional nappe structure before the intrusion of younger Shiraishino granodiorite (ca. 120 Ma).     

Unpairing metamorphic belts: P–T paths and a tectonic model for the Ryoke Belt, southwest Japan

Southwest Japan is divided into Outer and Inner Zones by the Median Tectonic Line (MTL), a major transcurrent fault. The Outer Zone is composed of the Sambagawa (high-pressure intermediate or high P/T type metamorphism), Chichibu and Shimanto Belts. In the Inner Zone, the Ryoke Belt (andalusite– sillimanite or low P/T type metamorphism) was developed mainly within a Jurassic accretionary complex. This spatial relationship between high P/T type and low P/T type metamorphic belts led Miyashiro to the idea that metamorphic belts were developed as ‘paired’ systems. Textural relationships and petrogenetically significant mineral assemblages in pelites from the Ryoke Belt imply peak P–T conditions of ≈5 kbar and up to 850 °C in migmatitic garnet–cordierite rocks from the highest-grade metamorphic zone. It is likely that the thermal anomaly responsible for metamorphism of the Ryoke Belt was related to a segment of the Farallon–Izanagi Ridge as it subducted under the eastern margin of the Asian continent during the Cretaceous. The sequence of mineral assemblages developed in pelites implies a metamorphic field gradient with shallow dP/dT slope, inferred to have been generated by a nested set of hairpin-like ‘clockwise’P–T paths. These P–T paths are characterized by limited prograde thickening, minor decompression at peak-T , and near-isobaric cooling, features that may be typical of P–T paths in low P/T type metamorphic belts caused by ridge subduction. A ridge subduction model for the Ryoke Belt implies that juxtaposition of the high-P/T metamorphic rocks of the Sambagawa Belt against it was a result of terrane amalgamation. Belt-parallel ductile stretching, recorded as syn-metamorphic, predominantly constrictional strain in both Ryoke and Sambagawa Belt rocks, and substantial sinistral displacement on the MTL are consistent with left-lateral oblique convergence. Diachroneity in fast cooling of the Ryoke Belt is implied by extant thermochronological data, and is inferred to relate to progressive SW to NE docking of the Sambagawa Belt. Thus, an alternative interpretation of ‘paired’ metamorphic belts in Japan is that they represent laterally contemporaneous terranes, rather than outboard and inboard components of a trench/arc ‘paired’ system. Amalgamation of laterally contemporaneous terranes during large translations of forearcs along continental margins may explain other examples of ‘paired’ metamorphic belts in the geological record.     

Prograde pressure–temperature paths in the pelitic schists of the Sambagawa metamorphic belt, SW Japan

Prograde P–T paths recorded by the chemistry of minerals of subduction‐related metamorphic rocks allow inference of tectonic processes at convergent margins. This paper elucidates the changing P–T conditions during garnet growth in pelitic schists of the Sambagawa metamorphic belt, which is a subduction related metamorphic belt in the south‐western part of Japan. Three types of chemical zoning patterns were observed in garnet: Ca‐rich normal zoning, Ca‐poor normal zoning and intrasectoral zoning. Petrological studies indicate that normally‐zoned garnet grains grew keeping surface chemical equilibrium with the matrix, in the stable mineral assemblage of garnet + muscovite + chlorite + plagioclase + paragonite + epidote + quartz ± biotite. Pressure and temperature histories were inversely calculated from the normally‐zoned garnet in this assemblage, applying the differential thermodynamic method (Gibbs' method) with the latest available thermodynamic data set for minerals. The deduced P–T paths indicate slight increase of temperature with increasing pressure throughout garnet growth, having an average dP/dT of 0.4–0.5 GPa/100 °C. Garnet started growing at around 470 °C and 0.6 GPa to achieve the thermal and baric peak condition near the rim (520 °C, 0.9 GPa). The high‐temperature condition at relatively low pressure (for subduction related metamorphism) suggests that heating occurred before or simultaneously with subduction.     

Petrological constraints on the formation conditions and retrograde P–T path of the Kotsu eclogite unit, central Shikoku

A largely undocumented region of eclogite associated with a thick blueschist unit occurs in the Kotsu area of the Sanbagawa belt. The composition of coexisting garnet and omphacite suggests that the Kotsu eclogite formed at peak temperatures of around 600 °C synchronous with a penetrative deformation (D1). There are local significant differences in oxygen fugacity of the eclogite reflected in mineral chemistries. The peak pressure is constrained to lie between 14 and 25 kbar by microstructural evidence for the stability of paragonite throughout the history recorded by the eclogite, and the composition of omphacite in associated eclogite facies pelitic schist. Application of garnet‐phengite‐omphacite geobarometry gives metamorphic pressures around 20 kbar. Retrograde metamorphism associated with penetrative deformation (D2) is in the greenschist facies. The composition of syn‐D2 amphibole in hematite‐bearing basic schist and the nature of the calcium carbonate phase suggest that the retrograde P–T path was not associated with a significant increase or decrease in the ratio of P–T conditions following the peak of metamorphism. This P–T path contrasts with the open clockwise path derived from eclogite of the Besshi area. The development of distinct P–T paths in different parts of the Sanbagawa belt shows the shape of the P–T path is not primarily controlled by tectonic setting, but by internal factors such as geometry of metamorphic units and exhumation rates.     

Inference of a detailed P–T path from P–T pseudosections using metapelitic rocks of variable composition from a single outcrop, Shackleton Range, Antarctica

Generally, P–T pseudosections for reduced compositional systems, such as K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, Na₂O–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O and MnO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, are well suited for inferring detailed P–T paths, comparing mineral assemblages observed in natural rocks with those calculated. Examples are provided by P–T paths inferred for four metapelitic samples from a 1 m² wide outcrop of the Herbert Mountains in the Shackleton Range, Antarctica. The method works well if the bulk composition used is reconstituted from average mineral modes and mineral compositions (AMC) or when X‐ray fluorescence (XRF) data are corrected for Al₂O₃ and FeO. A plagioclase correction is suitable for Al₂O₃. Correction for FeO is dependent on additional microscopic observations, e.g. the kind and amount of opaque minerals. In some cases, all iron can be treated as FeO^tot, whereas in others a magnetite or hematite correction yields much better results. Comparison between calculated and observed mineral modes and mineral compositions shows that the AMC bulk composition is best suited to the interpretation of rock textures using P–T pseudosections, whereas corrected XRF data yield good results only when the investigated sample has few opaque minerals. The results indicate that metapelitic rocks from the Herbert Mountains of the Northern Shackleton Range underwent a prograde P–T evolution from about 600 °C/5.5 kbar to 660 °C/7 kbar, followed by nearly adiabatic cooling to about 600 °C at 4.5 kbar.     

P–T path of high-pressure/low-temperature rocks and tectonic implications in the western Tianshan Mountains, NW China

The Chinese western Tianshan high-pressure/low-temperature (HP–LT) metamorphic belt, which extends for about 200 km along the South Central Tianshan suture zone, is composed of mainly metabasic blueschists, eclogites and greenschist facies rocks. The metabasic blueschists occur as small discrete blocks, lenses, bands, laminae or thick beds in meta-sedimentary greenschist facies country rocks. Eclogites are intercalated within blueschist layers as lenses, laminae, thick beds or large massive blocks (up to 2 km² in plan view). Metabasic blueschists consist of mainly garnet, sodic amphibole, phengite, paragonite, clinozoisite, epidote, chlorite, albite, accessory titanite and ilmenite. Eclogites are predominantly composed of garnet, omphacite, sodic–calcic amphibole, clinozoisite, phengite, paragonite, quartz with accessory minerals such as rutile, titanite, ilmenite, calcite and apatite. Garnet in eclogite has a composition of 53–79 mol% almandine, 8.5–30 mol% grossular, 5–24 mol% pyrope and 0.6–13 mol% spessartine. Garnet in blueschists shows similar composition. Sodic amphiboles include glaucophane, ferro-glaucophane and crossite, whereas the sodic–calcic amphiboles mainly comprise barroisite and winchite. The jadeite content of omphacite varies from 35–54 mol%. Peak eclogite facies temperatures are estimated as 480–580 °C for a pressure range of 14–21 kbar. The conditions of pre-peak, epidote–blueschist facies metamorphism are estimated to be 350–450 °C and 8–12 kbar. All rock types have experienced a clockwise P–T path through pre-peak lawsonite/epidote-blueschist to eclogite facies conditions. The retrograde part of the P–T path is represented by the transition of epidote-blueschist to greenschist facies conditions. The P–T path indicates that the high-pressure rocks formed in a B-type subduction zone along the northern margin of the Palaeozoic South Tianshan ocean between the Tarim and Yili-central Tianshan plates.     

The metamorphic evolution of metapelitic granulites from Radok Lake, northern Prince Charles Mountains, east Antarctica; evidence for an anticlockwise P–T path

Mineral textures in metapelitic granulites from the northern Prince Charles Mountains, coupled with thermodynamic modelling in the K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (KFMASHTO) model system, point to pressure increasing with increasing temperature on the prograde metamorphic path, followed by retrograde cooling (i.e. an anticlockwise P–T path). Textural evidence for the increasing temperature part of the path is given by the breakdown of garnet and biotite to form orthopyroxene and cordierite in sillimanite‐absent rocks, and through the break‐down of biotite and sillimanite to form spinel, cordierite and garnet in more aluminous assemblages. This is equated to the advective addition of heat from the regional emplacement of granitic and charnockitic magmas dated at c. 980 Ma. A subsequent increase in pressure, inferred from the break‐down of spinel and quartz to sillimanite, cordierite and garnet in aluminous rocks, is attributed to crustal thickening related to upright folding dated at 940–910 Ma. The terrane attained peak metamorphic temperatures of c. 880 °C at pressures of c. 6.0–6.5 kbar during this event. Subsequent cooling is inferred from the localised breakdown of cordierite and garnet to form biotite and sillimanite that developed in the latter stages of the same event. The textural observations described are interpreted via the application of P–T and P–T–X pseudosections. The latter show that most rock compositions preserve only fragments of the overall P–T path; a result of different rock compositions undergoing mineral assemblage changes, or changes in mineral modal abundance, on different sections of the P–T path. The results also suggest that partial melting during granulite facies metamorphism, coupled with melt loss and dehydration, initiated a switch from pervasive ductile, to discrete ductile/brittle deformation, during retrograde cooling.     

Influence of deformation partitioning and metamorphic re-equilibration on P–T path reconstruction in the pre-Alpine basement of central Southern Alps (Northern Italy)

The dominant foliation (S2) in the metapelites of the Southalpine basement, near the western side of the Tertiary Adamello intrusive stock, is a Variscan greenschist facies planar fabric, slightly reworked during thick-skin Alpine tectonics. S2 is defined by muscovite and chlorite and was formed by decrenulation of pre-existing foliations, which are confined to metre-size, less-deformed domains and defined by biotite and white mica. The pre-S2 fabric is composite (D1a & D1b) and defined by contrasting amphibolite facies metamorphic assemblages in different residual sites. Cld+Bt_I+Grt+Ms_I+Pl+Qtz and St+Bt_II+Grt+Ms_II+Pl+Qtz assemblages mark D1a and D1b fabrics respectively; these developed during successive steps of a single, temperature-prograde polyphase event, rather than during separate tectonometamorphic imprints affecting different tectonic units, later coupled during a D2 greenschist facies stage. Thermobarometric estimates of assemblages formed during D1a, D1b and D2 show a transition from T  =480–540  °C (during D1a) to T  =570–660  °C (during D1b), corresponding to a slight pressure-increase from 0.75–0.95  GPa to 0.85–1.15  GPa. D2 greenschist retrogression corresponds to a pressure and temperature decrease ( T  <400–550  °C and P <0.3–0.4  GPa). This P–T– deformation–time path is inferred to be the result of uplift from a depth of c. 35  km, after Palaeozoic subduction and continental collision; it is consistent with models postulated for other metamorphic units of the Variscan Belt in Europe. This is the first documented example in the Southern Alps of temperature-prograde metamorphism before Palaeozoic collision.     

P–T paths in the Handöl area, central Scandinavia: record of Caledonian accretion of outboard rocks to the Baltoscandian margin

The Seve–Köli Nappe Complex is widespread in the Scandinavian Caledonides and is composed of units representing parts of the Baltoscandian margin (Seve Nappes) now overlain by magmatic–sedimentary rocks (Köli Nappes) derived from west of this margin. The metamorphic evolution of Köli and Seve units has been studied in the Handöl area, central Scandinavian Caledonides, where a fragmented ophiolite with cover sequence in the lower Köli units is thrust over the higher grade Seve units. Thermobarometry constrains metamorphic conditions to 490–570° C/950–600 MPa, with a slight downwards increase in grade, for the lower Köli (Bunnerviken lens), 520–620° C/1000–600 MPa for the upper Seve (Täljstensvalen Complex), 630–740° C/750–650 MPa for the middle Seve (Snasahögarna Nappe) and 480–600° C/1150–1000 MPa for the lower Seve (Blåhammarfjället Nappe).
P–T paths during garnet growth have been constructed for all units, except the highest grade middle Seve. These paths record heating at the base of the Köli and cooling in the underlying Seve units. Pressure increase during garnet growth is indicated for all units leading to anticlockwise P–T paths in the Seve. The results imply thermal convergence with time for all units and spatial convergence in metamorphic grade in the Köli. It is suggested that the contrasting metamorphic histories on either side of the Seve–Köli boundary resulted from the emplacement of relatively colder Köli rocks on top of relatively hotter Seve rocks and that emplacement of structurally higher units contributed to the increase in pressure.     

P–T–t path of the Hercynian low-pressure rocks from the Mandatoriccio complex (Sila Massif, Calabria, Italy): new insights for crustal evolution

The tectono‐metamorphic evolution of the Hercynian intermediate–upper crust outcropping in eastern Sila (Calabria, Italy) has been reconstructed, integrating microstructural analysis, P–T pseudosections, mineral isopleths and geochronological data. The studied rocks belong to a nearly complete crustal section that comprises granulite facies metamorphic rocks at the base and granitoids in the intermediate levels. Clockwise P–T paths have been constrained for metapelites of the basal level of the intermediate–upper crust (Umbriatico area). These rocks show noticeable porphyroblastic textures documenting the progressive change from medium‐P metamorphic assemblages (garnet‐ and staurolite‐bearing assemblages) towards low‐P/high‐T metamorphic assemblages (fibrolite‐ and cordierite‐bearing assemblages). Peak‐metamorphic conditions of ～590 °C and 0.35 GPa are estimated by integrating microstructural observations with P–T pseudosections calculated for bulk‐rock and reaction‐domain compositions. The top level of the intermediate–upper crust (Campana area) recorded only the major heating phase at low‐P (～550 °C and 0.25 GPa), as documented by the static growth of biotite spots and of cordierite and andalusite porphyroblasts in metapelites. In situ U–Th–Pb dating of monazite from schists containing low‐P/high‐T metamorphic assemblages gave a weighted mean U–Pb concordia age of 299 ± 3 Ma, which has been interpreted as the timing of peak metamorphism. In the framework of the whole Hercynian crustal section the peak of low‐P/high‐T metamorphism in the intermediate‐to‐upper crust took place concurrently with granulite facies metamorphism in the lower crust and with emplacement of the granitoids in the intermediate levels. In addition, decompression is a distinctive trait of the P–T evolution both in the lower and upper crust. It is proposed that post–collisional extension, together with exhumation, is the most suitable tectonic setting in which magmatic and metamorphic processes can be active simultaneously in different levels of the continental crust.