Probabilistic yielding and cyclic behavior of geomaterials

In this paper, the novel concept of probabilistic yielding is used for 1‐D cyclic simulation of the constitutive behavior of geomaterials. Fokker–Planck–Kolmogorov equation‐based probabilistic elastic–plastic constitutive framework is applied for obtaining the complete probabilistic (probability density function) material response. Both perfectly plastic and hardening‐type material models are considered. It is shown that when uncertainties in material parameters are taken into consideration, even the simple, elastic‐perfectly plastic model captures some of the important features of geomaterial behavior, for example, modulus reduction with cyclic strain, which, deterministically, is only possible with more advanced constitutive models. Furthermore, it is also shown that the use of isotropic and kinematic hardening rules does not significantly improve the probabilistic material response. Copyright © 2010 John Wiley & Sons, Ltd.     

4: Transpressional tectonics, lower crust decoupling and intrusion of deep mafic sills: A model for the unusual metallogenesis of SW Iberia

SW Iberia is interpreted as an accretionary magmatic belt resulting from the collision between the South Portuguese Zone and the autochthonous Iberian terrane in Variscan times (350 to 330 Ma). In the South Portuguese Zone, pull-apart basins were filled with a thick sequence of siliciclastic sediments and bimodal volcanic rocks that host the giant massive sulphides of the Iberian Pyrite Belt. Massive sulphides precipitated in highly efficient geochemical traps where metal-rich but sulphur-depleted fluids of dominant basinal derivation mixed with sulphide-rich modified seawater. Massive sulphides formed either in porous/reactive volcanic rocks by sub-seafloor replacement, or in dark shale by replacement of mud or by exhalation within confined basins with high biogenic activity. Crustal thinning and magma intrusion were responsible for thermal maturation and dehydration of sedimentary rocks, while magmatic fluids probably had a minor influence on the observed geochemical signatures.The Ossa Morena Zone was a coeval calc-alkaline magmatic arc. It was the site for unusual mineralization, particularly magmatic Ni–(Cu) and hydrothermal Fe-oxide–Cu–Au ores (IOCG). Most magmatism and mineralization took place at local extensional zones along first-order strike-slip faults and thrusts. The source of magmas and IOCG and Ni–(Cu) deposits probably lay in a large mafic–ultramafic layered complex intruded along a detachment at the boundary between the upper and lower crust. Here, juvenile melts extensively interacted with low-grade metamorphic rocks, inducing widespread anatexis, magma contamination and further exsolution of hydrothermal fluids. Hypersaline fluids (δ¹⁸O_fluid > 5.4‰ to 12‰) were focused upward into thrusts and faults, leading to early magnetite mineralization associated with a high-temperature (> 500 °C) albite–actinolite–salite alteration and subsequent copper–gold-bearing vein mineralization at somewhat lower temperatures. Assimilation of sediments by magmas led in turn to the formation of immiscible sulphide and silicate melts that accumulated in the footwall of the layered igneous complex. Further injection of both basic and sulphide-rich magmas into the upper crust led to the formation of Ni–(Cu)-rich breccia pipes.Younger (330 to 280 Ma?) peraluminous granitoids probably reflect the slow ascent of relatively dry and viscous magmas formed by contact anatexis. These granitoids have W–(Sn)- and Pb–Zn-related mineralization that also shows geochemical evidence of major mantle–crust interaction. Late epithermal Hg–(Cu–Sb) and Pb–Zn–(Ag) mineralization was driven by convective hydrothermal cells resulting from the high geothermal gradients that were set up in the zone by intrusion of the layered igneous complex. In all cases, most of the sulphur seems to have been derived from leaching of the host sedimentary rocks (δ³⁴S = 7‰ to 20‰) with only limited mixing with sulphur of magmatic derivation.The metallogenic characteristics of the two terranes are quite different. In the Ossa Morena Zone, juvenile magmatism played a major role as the source of metals, and controlled the styles of mineralization. In the South Portuguese Zone, magmas only acted as heat sources but seem to have had no major influence as sources of metals and fluids, which are dominated by crustal signatures. Most of the magmatic and tectonic features related to the Variscan subduction and collision seem to be masked by those resulting from transpressional deformation and deep mafic intrusion, which led to the development of a metallogenic belt with little resemblance to other accretionary magmatic arcs.     

Fe and Mn in calcites cementing red beds: A record of oxidation–reduction conditions: Examples from the Catalan Coastal Ranges (NE Spain)

Fe and Mn occur in calcite cements depending on the oxidizing–reducing conditions of cementing waters, which may change according to depositional and diagenetic environments. In red beds, Mn and Fe are available from the ferruginous matrix. Thus, it is possible to know the oxidizing–reducing conditions of fluids that precipitated calcite as a function of Mn and Fe content in calcite cement. A detailed petrological (with special attention to cathodoluminescence) and geochemical analysis of these cements is a useful tool to constrain the diagenetic evolution of red beds and the history of the basin where they deposited.     

Geochronology and fluid source constraints of the Songligou gold‐telluride deposit,western Henan Province,China: Analysis of genetic implications

The Songligou gold‐telluride deposit, located in Songxian County, western Henan Province, China, is one of many gold‐telluride deposits in the Xiaoqinling‐Xiong'ershan district. Gold orebodies occur within the Taihua Supergroup and are controlled by the WNW F101 Fault, and the fault was cut across by a granite porphyry dike. Common minerals in gold orebodies include quartz, chlorite, epidote, K‐feldspar, calcite, fluorite, sericite, phlogopite, bastnasite, pyrite, galena, chalcopyrite, sphalerite, tellurides, gold, bismuthinite, magnetite, and hematite, and pyrite is the dominant sulfide. Four mineralization stages are recognized, including pyrite‐quartz stage (I), quartz‐pyrite stage (II), gold‐telluride stage (III), and quartz‐calcite stage (IV). This work reports the Rb–Sr age of gold‐telluride‐bearing pyrite and zircon U–Pb age of granite porphyry, as well as S isotope data of pyrite and galena. The pyrite Rb–Sr isochron age is 126.6 ± 2.3 Ma (MSWD = 1.8), and the average zircon U–Pb age of granite porphyry is 166.8 ± 4.1 Ma (MSWD = 4.9). (⁸⁷Sr/⁸⁶Sr) _i values of pyrite and δ³⁴S values of sulfides vary from 0.7104 to 0.7105 and ?11.84 to 0.28‰, respectively. The obtained Rb–Sr isochron age represents the ore formation age of the Songligou gold‐telluride deposit, which is much younger than the zircon U–Pb age of the granite porphyry. Strontium and S isotopes, together with the presence of bastnaesite, suggest that the ore‐forming fluid was derived from felsic magmas with input of a mantle component and subsequently interacted with the Taihua Supergroup. Tellurium was derived from metasomatized mantle and was related to the subduction of the Shangdan oceanic crust and Izanagi plate beneath the North China Craton (NCC). This deposit is a part of the Early Cretaceous large‐scale gold mineralization in east NCC and formed in an extensional tectonic setting.     

Dominant grains network and behavior of sand–silt mixtures: stress–strain modeling

Stress–strain modeling of sand–silt mixtures is important in the analysis and design of earth structures. In this paper, we develop a stress–strain model that can predict the behavior of sand–silt mixtures with any amount of fines content. This model is based on a micromechanics approach, which involves mean‐field assumptions. For the mixtures with low amount of fines, the mechanical behavior is dominated by sand grains network. On the other hand, for the mixtures with high amount of fines, the mechanical behavior is dominated by silt grains network. Using this concept of dominant grains network, the behavior of mixtures with any amount of fines can be predicted from knowing the behavior of sand and silt, alone. We also modeled the critical state friction angle, critical state void ratio, and elastic stiffness for the mixtures as a function of fines content. The applicability of this developed stress–strain model is shown by comparing the simulated and measured results for two different types of sand–silt mixtures with full range of fines content. Copyright © 2012 John Wiley & Sons, Ltd.     

Climatic and tectonic controls on carbonate deposition in syn‐rift siliciclastic fluvial systems: A case of microbialites and associated facies in the Late Jurassic

This work provides new insights to assess the factors controlling carbonate deposition in the siliciclastic fluvial systems of rift basins. Sedimentological and stable‐isotope data of microbialites and associated carbonate facies, along with regional geological information, are shown to reveal the influence of climate and tectonics on the occurrence and attributes of carbonate deposits in these settings. The Vega Formation – a 150 m thick Lower Kimmeridgian siliciclastic fluvial sequence in Asturias Province (northern Spain) – constitutes a candidate for this approach. This unit includes varied facies (stromatolites; rudstones, packstones and wackestones containing oncoids, intraclasts, charophytes and shell bioclasts; marlstones and polygenic calcareous conglomerates) that formed in a low‐gradient fluvial–lacustrine system consisting of shallow, low‐sinuosity oncoid‐bearing channels and pools within marshy areas, with sporadic coarse alluvial deposition. The sedimentological attributes indicate common erosion by channel overflow and rapid lateral changes of subenvironments caused by water‐discharge variations. The carbonate fluvial–lacustrine system developed near uplifted marine Jurassic rocks. The occurrence of the system was conditioned by normal faults (active during the deposition of the unit) that favoured: (i) springs of HCO₃–Ca‐rich water from a Rhaetian–Sinemurian carbonate rock aquifer; and (ii) carbonate deposition in areas partially isolated from the adjacent siliciclastic fluvial system. The microbialite δ¹³C and δ¹⁸O values support deposition in a hydrologically open system, fed by ambient‐temperature meteoric water, with riparian vegetation. Three types of lamination in the stromatolites and oncoids reflect distinct morphological types of cyanobacterial communities. The textural pattern of lamination parallels δ¹³C and δ¹⁸O changes, suggesting short‐term cycles of precipitation and temperature. A moderately to strongly contrasted seasonal and/or pluriannual precipitation regime is inferred from the cyclic δ¹³C pattern of the lamination and from the discontinuous and asymmetrical growth of oncoids. Thus, the isotopic and sedimentological attributes of the carbonate deposits were linked to short‐term climate changes associated with semi‐arid conditions, consistent with the studied climatic zone.     

A constitutive model for the dynamic and high‐pressure behaviour of a propellant‐like material: Part II: Model development and applications

This paper presents the second part of a work that aims at developing a mechanical model for the behaviour of propellant‐like materials under high confining pressure and strain rate. The model is to be employed to determine the temperature rise due to mechanical dissipation during a dynamic penetration event. Using the kinematical and thermodynamic background derived in the first part, a viscoelastic–viscoplastic–compaction model is put forward and identified. Viscoelasticity and compaction refer to the elastomeric nature of the material, while viscoplasticity, including implicit damage through dilatancy, reflects its granular nature. Some numerical exercises are performed, in view of determining the major model forces and weaknesses, and of assessing the numerical algorithm robustness. A penetration event is preliminarily simulated, and a temperature rise field predicted. Necessary model improvements are finally discussed, together with several ways of research for a longer term approach. Copyright © 2001 John Wiley & Sons, Ltd.     

海岛型城市水资源利用及其承载力对比研究

以新加坡、香港、厦门、舟山为例,根据国民经济和社会发展指标、用水总量及用水量构成、产业用水量、人口经济规模与水资源承载力等相关数据和指标,对水资源利用管理进行分析和对比,对远期水资源利用及其对经济发展的承载力进行预测;分析了海岛型城市与内陆型城市水资源利用的差异,对舟山群岛新区的水资源利用及承栽力所面临的挑战提出了相应的对策和建议。     

Application of Greek lignite as an additive for controlling rheological and filtration properties of water–bentonite suspensions at high temperatures: A review

This review paper presents the results of an extensive study investigating whether addition of 3% w/w Greek lignite to 6.42% w/w water–bentonite suspensions, after being exposed to high temperatures, can prevent gelation and control filtration characteristics. Two different bentonites and eight lignites from different Greek basins have been used while a commercial lignite product has been used as standard. The lignite-free bentonite suspensions heated to 177 °C for 16 h (thermal aging) thicken considerably, increasing the yield stress and the yield point. Fluid consistency and flow behavior indices also change while no significant change is observed for plastic viscosity. Thermal aging of the suspensions results in unacceptably high fluid loss values.Addition of Greek lignite to water–bentonite suspensions, followed by thermal aging, provided the rheological stability of the suspensions by maintaining the low yield stress/point regardless of the type of bentonite. Some of the lignites performed as well as their commercial counterpart. No specific trends for rheological improvement have been identified with respect to various characteristics of lignites such as contents of humic, fulvic acids, humins and other parameters such as specific surface area and cation exchange capacity.Furthermore, addition of lignite in most cases provided very good filtration control of the water–bentonite suspensions after exposure to 177 °C, with some Greek lignites being superior to the commercial product. The same lignite parameters examined for rheological control, were also examined to determine their effect on fluid loss of these suspensions for both bentonites. The content of humic and fulvic acids of two groups of lignites showed weak inverse correlations with the fluid loss volumes for both bentonites, while all other parameters did not seem to directly correlate with the effectiveness of the lignites.     

Geologic, fluid inclusion and isotopic characteristics of the Jinding Zn–Pb deposit, western Yunnan, South China: A review

With a reserve of  200 Mt ore grading 6.08% Zn and 1.29% Pb (i.e., a metal reserve of  15 Mt) hosted in Cretaceous and Tertiary terrestrial rocks, the Jinding deposit is the largest Zn–Pb deposit in China, and also the youngest sediment-hosted super giant Zn–Pb deposit in the world. The deposit mainly occurs in the Jinding dome structure as tabular orebodies within breccia-bearing sandstones of the Palaeocene Yunlong Formation (autochthonous) and in the overlying sandstones of the Early Cretaceous Jingxing Formation (allochthonous). The deposit is not stratiform and no exhalative sedimentary rocks have been observed. The occurrence of the orebodies, presence of hangingwall alteration, and replacement and open-space filling textures all indicate an epigenetic origin. Formation of the Jinding Zn–Pb deposit is related to a period of major continental crust movement during the collision of the Indian and Eurasian Plates. The westward thrusts and dome structure were successively developed in the Palaeocene sedimentary rocks in the ore district, and Zn–Pb mineralisation appears to have taken place in the early stage of the doming processes.The study of fluid inclusions in sphalerite and associated gangue minerals (quartz, celestine, calcite and gypsum) shows that homogenisation temperatures ranged from 54 to 309 °C and cluster around 110 to 150 °C, with salinities of 1.6 to 18.0 wt.% NaCl equiv. Inert gas isotope studies from inclusions in ore- and gangue-minerals reveal 2.0 to 15.6% mantle He, 53% mantle Ne and a considerable amount of mantle Xe in the ore-forming fluids. The Pb-isotope composition of ores shows that the metal is mainly of mantle origin, mixed with a lesser amount of crustal lead. The widely variable and negative δ³⁴S values of Jinding sulphides suggest that thermo-chemical or bacterial sulphate reduction produced reduced sulphur for deposition of the Zn–Pb sulphides. The mixing of a mantle-sourced fluid enriched in metals and CO₂ with reduced sulphide-bearing saline formation water in a structural–lithologic trap may have been the key mechanism for the formation of the Jinding deposit.The Jinding deposit differs from known major types of sediment-hosted Zn–Pb deposits in the world, including sandstone-type (SST), Mississippi Valley type (MVT) and sedimentary-exhalative (SEDEX). Although the fine-grained ore texture and high Zn/Pb ratios are similar to those in SEDEX deposits, the Jinding deposit lacks any exhalative sedimentary rocks. Like MVT deposits, Jinding is characterised by simple mineralogy, epigenetic features and involvement of basinal brines in mineralisation, but its host rocks are mainly sandstones and breccia-bearing sandstones. The Jinding deposit is also different from SST deposits with its high Zn/Pb ratios, among other characteristics. Most importantly, the Jinding deposit was formed in an intracontinental terrestrial basin with an active tectonic history in relation to plate collision, and mantle-sourced fluids and metals played a major role in ore formation, which is not the case for SEDEX, MVT, and SST. We propose that Jinding represents a new type of sediment-hosted Zn–Pb deposit, named the ‘Jinding type’.     

Lithofacies associations and structural evolution of the Archean Rio das Velhas greenstone belt, Quadrilátero Ferrífero, Brazil: A review of the setting of gold deposits

The Rio das Velhas greenstone belt is located in the Quadrilátero Ferrífero region, in the southern extremity of the São Francisco Craton, central-southern part of the State of Minas Gerais, SE Brazil. The metavolcano–sedimentary rocks of the Rio das Velhas Supergroup in this region are subdivided into the Nova Lima and Maquiné Groups. The former occurs at the base of the sequence, and contains the major Au deposits of the region. New geochronological data, along with a review of geochemical data for volcanic and sedimentary rocks, suggest at least two generations of greenstone belts, dated at 2900 and 2780 Ma. Seven lithofacies associations are identified, from bottom to top, encompassing (1) mafic–ultramafic volcanic; (2) volcano–chemical–sedimentary; (3) clastic–chemical–sedimentary, (4) volcaniclastic association with four lithofacies: monomictic and polymictic breccias, conglomerate–graywacke, graywacke–sandstone, graywacke–argillite; (5) resedimented association, including three sequences of graywacke–argillite, in the north and eastern, at greenschist facies and in the south, at amphibolite metamorphic facies; (6) coastal association with four lithofacies: sandstone with medium- to large-scale cross-bedding, sandstone with ripple marks, sandstone with herringbone cross-bedding, sandstone–siltstone; (7) non-marine association with the lithofacies: conglomerate–sandstone, coarse-grained sandstone, fine- to medium-grained sandstone. Four generations of structures are recognized: the first and second are Archean and compressional, driven from NNE to SSW; the third is extensional and attributed to the Paleoproterozoic Transamazonian Orogenic Cycle; and the fourth is compressional, driven from E to W, is related to the Neoproterozoic Brasiliano Orogenic Cycle. Gold deposits in the Rio das Velhas greenstone belt are structurally controlled and occur associated with hydrothermal alterations along Archean thrust shear zones of the second generation of structures.Sedimentation occurred during four episodes. Cycle 1 is interpreted to have occurred between 2800 and 2780 Ma, based on the ages of the mafic and felsic volcanism, and comprises predominantly chemical sedimentary rocks intercalated with mafic–ultramafic volcanic flows. It includes the volcano–chemical–sedimentary lithofacies association and part of the mafic–ultramafic volcanic association. The cycle is related to the initial extensional stage of the greenstone belt formation, with the deposition of sediments contemporaneous with volcanic flows that formed the submarine mafic plains. Cycle 2 encompasses the clastic–chemical–sedimentary association and distal turbidites of the resedimented association, in the eastern sector of the Quadrilátero Ferrífero. It was deposited in the initial stages of the felsic volcanism. Cycle 2 includes the coastal and resedimented associations in the southern sector, in advanced stages of subduction. In this southern sedimentary cycle it is also possible to recognize a stable shelf environment. Following the felsic volcanism, Cycle 3 comprises sedimentary rocks of the volcaniclastic and resedimented lithofacies associations, largely in the northern sector of the area. The characteristics of both associations indicate a submarine fan environment transitional to non-marine successions related to felsic volcanic edifices and related to the formation of island arcs. Cycle 4 is made up of clastic sedimentary rocks belonging to the non-marine lithofacies association. They are interpreted as braided plain and alluvial fan deposits in a retroarc foreland basin with the supply of debris from the previous cycles.     

Human–wildlife conflict and gender in protected area borderlands: A case study of costs, perceptions, and vulnerabilities from Uttarakhand (Uttaranchal), India

Human–wildlife conflict (HWC) is a growing problem for communities located at the borders of protected areas. Such conflicts commonly take place as crop-raiding events and as attack by wild animals, among other forms. This paper uses a feminist political ecology approach to examine these two problems in an agricultural village located at the border of Rajaji National Park in Uttarakhand (formerly Uttaranchal), India. Specifically, it investigates the following three questions: What are the “visible” and “hidden” costs of such conflict with wildlife? To what extent are these costs differentially borne by men and women? How do villagers perceive any such differences? Survey and interview data were collected from over 100 individuals in the study site over a period of 9 months in 2003–2004. It was found that for participants in this study, costs of HWC included decreased food security, changes to workload, decreased physical and psychological wellbeing, economic hardship, and at times an increase in illegal or dangerous activities. The research also showed that although women in the study area bore a disproportionate burden of these effects, roughly half of survey respondents perceived that men and women were equally affected. A possible explanation for this gap considers the relationships between gendered uses of space, work, status, and identity. The findings illustrate the importance of addressing both visible and hidden costs of HWC for members of park communities and support a call for increased gender-sensitivity in HWC research.     

A study of inherited zircons in granitoid rocks from the South Portuguese and Ossa-Morena Zones, Iberian Massif: support for the exotic origin of the South Portuguese Zone

Trace element and U–Pb isotopic analyses of inherited zircon cores from a sample of Gil Márquez granodiorite (South Portuguese Zone, SPZ) and Almonaster nebulite (Ossa-Morena Zone, OMZ, in the Aracena Metamorphic Belt) have been obtained using laser ablation-inductively coupled plasma-mass spectrometry. These data reveal differences in the age of deep continental crust in these two zones. Inherited zircon cores from the Ossa-Morena Zone range at 600±100 Ma, 1.7–2 Ga and 2.65–2.95 Ga, while those from the South Portuguese Zone range at 400–500 and 700–800 Ma. These data support the “exotic” origin of the South Portuguese Zone basement relative to the rest of Iberian Massif. The young ages of inherited zircon cores and Nd model ages of magmatic rocks of the South Portuguese Zone are comparable to results from granulite facies xenoliths and granitic rocks from the Meguma Terrane and Avalonia and support a correlation between the basement of the southernmost part of the Iberian Massif and the northern Appalachians.     

Sediment hosted lead–zinc deposits of the Neoproterozoic Bambuí Group and correlative sequences, São Francisco Craton, Brazil: A review and a possible metallogenic evolution model

The Proterozoic sediment-hosted Zn–(Pb) sulfide and non-sulfide deposits of the São Francisco Craton, Brazil, are partially syn-diagenetic and epigenetic and were probably formed during extensional events. The majority of the deposits occur within shallow water dolomites. The Pb isotopic data of sulfides are relatively homogeneous for individual deposits and plot above the upper crust evolution curve of the Plumbotectonic model. Some of the deposits are characterized by highly radiogenic lead (²⁰⁶Pb/²⁰⁴Pb ≥ 21) originating from the highly radioactive crust of the São Francisco Craton. Pb and S isotopic data suggest the sources of metal and sulfur for the deposits to be the basement rocks and seawater sulfates in the sediments, respectively. The relatively high temperatures of formation (100 to 250 °C) and moderate salinity (3% to 20% NaCl equiv.) of the primary fluid inclusions in the sphalerite crystals suggest the participation of basinal mineralizing fluids in ore formation. The steep paleo-geothermal gradient generated by the radioactively enriched basement rocks probably assisted in heating up the circulating mineralizing fluids.     

A curious case of agreement between conventional thermobarometry and phase equilibria modelling in granulites: New constraints on P–T estimates in the Antarctica segment of the Musgrave–Albany–Fraser–Wilkes Orogen

The Windmill Islands region in Wilkes Land, east Antarctica, preserves granulite facies metamorphic mineral assemblages that yield seemingly comparable P–T estimates from conventional thermobarometry and mineral equilibria modelling. This is uncommon in granulite facies terranes, where conventional thermobarometry and phase equilibria modelling generally produce conflicting P–T estimates because peak mineral compositions tend to be modified by retrograde diffusion processes. In situ U–Pb monazite geochronology and calculated metamorphic phase diagrams show that the Windmill Islands experienced two phases of high thermal gradient metamorphism during the Mesoproterozoic. The first phase of metamorphism is recorded by monazite ages in two widely separated samples and occurred at c. 1,305 Ma. This event was regional in extent, involved crustally derived magmatism and reached conditions of ~3.2–5 kbar and 690–770°C corresponding to very high thermal gradients of >150°C/kbar. The elevated thermal regime is interpreted to reflect a period of extension or increased extension in a back‐arc setting that existed prior to c. 1,330 Ma. The first metamorphic event was overprinted by granulite facies metamorphism at c. 1,180 Ma that was coeval with the intrusion of charnockite. This event involved peak temperatures of ~840–850°C and pressures of ~4–5 kbar. A phase of granitic magmatism at c. 1,250–1,210 Ma, prior to the intrusion of the charnockite, is interpreted to reflect a phase of compression within an overall back‐arc setting. Existing conventional thermobarometry suggests conditions of ~4 kbar and 750°C for M₁ and 4–7 kbar and 750–900°C for M₂. The apparent similarities between the phase equilibria modelling and existing conventional thermobarometry may suggest either that the terrane cooled relatively quickly, or that the P–T ranges obtained from conventional thermobarometry are sufficiently imprecise that they cover the range of P–T conditions obtained in this study. However, without phase equilibria modelling, the veracity of existing conventional P–T estimates cannot be evaluated. The calculated phase diagrams from this study allow the direct comparison of P–T conditions in the Windmill Islands with phase equilibria models from other regions in the Musgrave–Albany–Fraser–Wilkes Orogen. This shows that the metamorphic evolution of the Wilkes Land region is very similar to that of the eastern Albany–Fraser Orogen and Musgrave Province in Australia, and further demonstrates the remarkable consistency in the timing of metamorphism and the thermal gradients along the ~5,000 km strike length of this system.