Non-cosmogenic lithium-6 in iron meteorites

A neutron activation method is used to measure⁶Li via the reaction⁶Li(n, α)³H in iron meteorites. It is found that most⁶Li occurs in non-metallic inclusions which can be separated by dissolution of the metal in 4 M H₂SO₄. The non-magnetic portion of such a residue has as high as 0.9 ppm⁶Li, while in the bulk sample⁶Li ranges from 0.02 to 10 ppb. Average⁶Li contents (ppb) for various classes are IA, 1.8; IIAB, 1.6; and IIIA, 0.4. Cosmic-ray-produced⁶Li is generally much smaller than the native⁶Li.     

Total nitrogen in iron meteorites

Total nitrogen contents have been measured by RNA of 30 iron and 4 stony-iron meteorites. Wide variations in N concentrations are noted (0.5 ppm to about 200 ppm). As a group, the IA irons have the highest nitrogen. This element is positively correlated with C, Ga, and Ge. Samples of meteorites that have been exposed to shock do not show any abnormal N distribution.     

Nitrogen in tektites and natural glasses

Nitrogen concentrations in various tektites and natural glasses have been measured using RNAA and are found to be almost constant at about 15 ppm. A terrestrial origin for tektite formation is favoured.     

Dimethylsulfide and Phaeocystis poucheti in the southeastern Bering Sea

Dimethylsulfide (DMS), a volatile excretion product of marine phytoplankton, was determined in the water column during the spring phytoplankton bloom on the southeastern Bering Sea shelf. In the same samples, a broad range of variables which characterize the biological processes in this region were measured. DMS was correlated with phytoplankton chlorophyll in the outer shelf and oceanic domains, but not in the middle shelf domain. A very strong correlation between the cell density of the haptophyte Phaeocystis poucheti and the DMS concentration in seawater was found, which suggests that this species accounts for most of the DMS present in the study region. We propose that in P. poucheti and certain other phytoplankton species the excretion of DMS is incidental to the release of acrylic acid which serves to inhibit bacterial attack upon the algae.     

Monitoring trace elements in the mussel,Mytilus edulis using X-ray energy spectroscopy

X-ray energy spectroscopy has been successfully utilized to provide rapid, multi-elemental, quantitative analyses of the intertidal mussel, Mytilus edulis, found in southern coastal waters of British Columbia (Canada). Since no a priori decision needed to be made on which elements required monitoring, concentrations of the seven dominant elements (Mn, Fe, Cu, Zn, As, Se and Pb) were determined in the gills and viscera of these organisms. The potential usefulness of XES for providing relevant data on aquatic bioaccumulators for environmental monitoring studies is discussed.     

Chlorinated hydrocarbons in gulls from the Baltic south coast

Polychlorinated terphenyls among organochlorine pesticides and polychlorinated biphenyls were detected in some gulls from the Gdańsk Bay, Baltic Sea.     

Extreme value distribution and reliability of nonlinear stochastic structures

A new approach to evaluate the extreme value distribution （EVD） of the response and reliability of general multi-DOF nonlinear stochastic structures is proposed. The approach is based on the recently developed probability density evolution method, which enables the instantaneous probability density functions of the stochastic responses to be captured. In the proposed method, a virtual stochastic process is first constructed to satisfy the condition that the extreme value of the response equals the value of the constructed process at a certain instant of time. The probability density evolution method is then applied to evaluate the instantaneous probability density function of the response, yielding the EVD. The reliability is therefore available through a simple integration over the safe domain. A numerical algorithm is developed using the Number Theoretical Method to select the discretized representative points. Further, a hyper-ball is imposed to sieve the points from the preceding point set in the hypercube. In the numerical examples, the EVD of random variables is evaluated and compared with the analytical solution. A frame structure is analyzed to capture the EVD of the response and the dynamic reliability. The investigations indicate that the proposed approach provides reasonable accuracy and efficiency.     

Actinomycetes in New York Harbour sediments and dredging spoil

A large number and variety of species of actinomycetes were isolated from sediment samples collected in New York Harbour and from the New York Bight in the course of studies on the distribution of these bacteria in coastal regions. Isolates recovered from the New York Bight sediment were similar to those from other inshore areas, although the total counts were lower. Larger numbers of actinomycetes were recovered from harbour sediments, as well as dredging spoil samples collected from a capped dump site in the New York Bight. The capping operation was monitored and effects on the microbial populations were detected. Selected genera associated with the dredge spoil were determined to be allochthonous, providing useful microbial markers for the dredged material. Many of the microbial species survive in the dump area, but some appear to be metabolically active, perhaps altering the chemical nature of the dumped material.     

震级离散下的震级频度关系

运用最大熵原理,研究震级离散条件下震级频度关系,得到震级离散条件下震级概率分布函数,结果表明:(1)震级大于等于某一震级的地震次数应通过离散求和的方式得到,而不应通过积分的方式得到;(2) 震级上限取为∞的情况下,古登堡意义和里克特意义两种震级频度关系式的b值相等;震级上限有限的情况下,里克特意义震级频度关系式可能不是直线.     

Baseline levels of benzo(a)pyrene in southern California mussels

Marine mussels accumulate the carcinogen benzo(a)pyrene from contaminated environments. Baseline studies in California indicate that levels of the carcinogen in mussels are at or near zero, except in areas of human activity. This finding runs counter to previous suggestions that benzo(a)pyrene is widely distributed in marine organisms.     

Calculation of oil concentrations under chemically dispersed slicks

Equations are proposed which describe the diffusion of a plume of oil from chemically dispersed oil slicks into the oceanic water column and which yield estimates of oil concentration as a function of the volume of oil dispersed, time-varying plume area, depth, time, and as a function of a single adjustable parameter, vertical diffusivity. A ‘diffusion floor’ at any desired depth may be included. Experimental data were fitted to the equations to yield an estimate of this diffusivity. It is concluded that oil concentrations can be estimated with a mean error of a factor of three, this high value being attributable to the inherently variable nature of the oceanic diffusion processes. Implications for assessing the toxic effects of dispersed slicks are discussed. It may be possible to calculate acute median lethal water depths and volumes for given organisms subjected to given dispersed oil slicks.     

Effect of enstatite activity and oxygen partial pressure on the point-defect chemistry of olivine

The variation of the point-defect concentrations in olivine with changes in enstatite activity and oxygen partial pressure are derived from formal thermodynamic arguments. Two models for these variations are constructed; the models differ in the choice of the approximate charge-neutrality condition in the near-stoichiometric regime. Under favorable circumstances, the effect of the oxygen partial pressure on olivine's point-defect chemistry can provide a diagnostic technique. Activity differences within the upper mantle may have a significant effect on olivine's transport properties because of their effect on the point-defect concentrations. The activity of enstatite plays an important role in the point-defect chemistry of olivine.     

Application of the extreme value approaches to the apparent magnitude distribution of the earthquakes

The apparent magnitude of an earthquakey is defined as the observed magnitude value and differs from the true magnitudem because of the experimental noisen. Iff(m) is the density distribution of the magnitudem, and ifg(n) is the density distribution of the errorn, then the density distribution ofy is simply computed by convolvingf andg, i.e.h(y)=f*g.If the distinction betweeny andm is not realized, any statistical analysis based on the frequency-magnitude relation of the earthquake is bound to produce questionable results. In this paper we investigate the impact of the apparent magnitude idea on the statistical methods that study the earthquake distribution by taking into account only the largest (or extremal) earthquakes. We use two approaches: the Gumbel method based on Gumbel theory (Gumbel, 1958), and the Poisson method introduced byEpstein andLomnitz (1966). Both methods are concerned with the asymptotic properties of the magnitude distributions. Therefore, we study and compare the asymptotic behaviour of the distributionsh(y) andf(m) under suitable hypotheses on the nature of the experimental noise. We investigate in detail two dinstinct cases: first, the two-side limited symmetrical noise, i.e. the noise that is bound to assume values inside a limited region, and second, the normal noise, i.e. the noise that is distributed according to a normal symmetric distribution.We further show that disregarding the noise generally leads to biased results and that, in the framework of the apparent magnitude, the Poisson approach preserves its usefulness, while the Gumbel method gives rise to a curious paradox.     

Impact flows and crater scaling on the moon

The axisymmetric distribution of stress, internal energy and particle velocity resulting from the impact of an iron meteoroid with a gabbroic anorthosite lunar crust has been calculated for the regime in which shock-induced melting and vaporization takes place. Comparison of impact flow fields, with phase changes in silicates taken into account, with earlier results demonstrate that in the phase change case when the 15-km/s projectile has penetrated some two projectile radii into the moon, the peak stress in the flow is ～0.66 Mbar at a depth of 66 km, and the stress has decayed to ～66 kbar at a depth of 47 km. Rapid attenuation occurs because of the high rarefaction velocity of the high-pressure phases associated with a 35% (zero-pressure) density increase. This feature of the phase-change flow tends to strongly concentrate the maximum shock pressures along the meteoroid trajectory (axis) and makes the conical zone along which high internal energy deposition occurs, both shallow and narrow. Examination of the gravitational energies required to excavate larger craters on the moon indicates the importance of gravity forces acting during the excavation of craters having radii in the range greater than ～2 – ～140 km. It is observed that the “hydrodynamic” energy vs. crater radius relation approaches those for various “gravitational” energy vs. radius relations at the radii values corresponding to the larger mare basins. Cratering energy values in the range of (1.0 – 9.4) · 10³² erg are inferred on this basis for the Imbrium crater. Using these values and the criteria that all rocks exposed to ～100 kbar or greater shock pressures are included in the ejecta (some of which falls back) implies that the maximum depth of sampling expected to be represented within the Apollo collection lies in the range 148–328 km.