Geochemistry of the Uintjiesberg kimberlite, South Africa: petrogenesis of an off-craton, group I, kimberlite

The Uintjiesberg kimberlite diatreme occurs within the Proterozoic Namaqua–Natal Belt, South Africa, approximately 60 km to the southwest of the Kaapvaal craton boundary. It is a group I, calcite kimberlite that has an emplacement age of 100 Ma. Major and trace element data, in combination with petrography, are used to evaluate its petrogenesis and the nature of its source region. Macrocryst phases are predominantly olivine with lesser phlogopite, with very rare garnet and Cr-rich clinopyroxene. Geochemical variation amongst the macrocrystic samples (Mg# 0.85–0.87, SiO₂=27.0–29.3%, MgO=26.1–30.5%, CaO=10.9–13.5%) is shown to result from 10% to 40% entrainment and partial assimilation of peridotite xenoliths, whereas that shown by the aphanitic samples (Mg# 0.80–0.83, SiO₂=19.1–23.0%, MgO=17.9–23.9%, CaO=16.5–23.7%) is consistent with 7–25% crystal fractionation of olivine and minor phlogopite. Changing trajectories on chemical variation diagrams allow postulation of a primary magma composition with 25% SiO₂, 26% MgO, 2.3% Al₂O₃, 5%H₂O, 8.6% CO₂ and Mg#=0.85.

Forward melting models, assuming 0.5% melting, indicate derivation of the primary Uintjiesberg kimberlite magma from a source enriched in light rare earth elements (LREE) by 10× chondrite and heavy REE (HREE) by 0.8–2× chondrite, the latter being dependent on the proportion of residual garnet. Significant negative Rb, K, Sr, Hf and Ti anomalies present in the inferred primary magma composition are superimposed on otherwise generally smooth primitive mantle-normalized trace element patterns, and are inferred to be a characteristic of the primary magma composition. The further requirement for a source with chondritic or lower HREE abundances, residual olivine with high Fo content (Fo₉₄) suggests derivation from a mantle previously depleted in mafic melt but subsequently enriched in highly incompatible elements prior to kimberlite genesis. These requirements are interpreted in the context of melting of continental lithospheric mantle previously enriched by metasomatic fluids derived from a sublithospheric (plume?) source.     

Neoproterozoic ‘anomalous’ kimberlites of Guaniamo, Venezuela: Mica kimberlites of ‘isotopic transitional’ type

In Venezuela, kimberlites have so far only been found in the Guaniamo region, where they occur as high diamond grade sheets in massive to steeply foliated Paleoproterozoic granitoid rocks. The emplacement age of the Guaniamo kimberlites is 712±6 Ma, i.e., Neoproterozoic. The Guaniamo kimberlites contain a high abundance of mantle minerals, with greater than 30% olivine macrocrysts. The principal kimberlite indicator minerals found are pyrope garnet and chromian spinel, with the overwhelming majority of the garnets being of the peridotite association. Chrome-diopside is rare, and picroilmenite is uncommon. Chemically, the Guaniamo kimberlites are characterized by high MgO contents, with low Al₂O₃ and TiO₂ contents and higher than average FeO and K₂O contents. These rocks have above average Ni, Cr, Co, Th, Nb, Ta, Sr and LREE concentrations and very low P, Y and, particularly, Zr and Hf contents. The Nb/Zr ratio is very distinctive and is similar to that of the Aries, Australia kimberlite. The Guaniamo kimberlites are similar in petrography, mineralogy and mantle mineral content to ilmenite-free Group 2 mica kimberlites of South Africa. The Nd-Sr isotopic characteristics of Guaniamo kimberlites are distinct from both kimberlite Group 1 and Group 2, being more similar to transitional type kimberlites, and in particular to diamondiferous kimberlites of the Arkhangelsk Diamond Province, Russia. The Guaniamo kimberlites form part of a compositional spectrum between other standard kimberlite reference groups. They formed from metasomatised subcontinental lithospheric mantle and it is likely that subduction of oceanic crust was the source of this metasomatised material, and also of the eclogitic component, which is dominant in Guaniamo diamonds.     

PT conditions and trace element variations of picroilmenites and pyropes from placers and kimberlites in the Arkhangelsk region,NW Russia

Compositions of picroilmenite and pyrope concentrates from Carboniferous sandstones in the Arkhangelsk kimberlite province were analyzed by EPMA and LAM ICP MS in Analytic Center of V.S. Sobolev’s Institute of Geology and Mineralogy, SD RAS, Novosibirsk. The results from single grain thermobarometry (Ashchepkov et al., 2010, Ashchepkov et al., 2011, Ashchepkov et al., 2012) for garnet, spinel, ilmenite and clinopyroxene suggest heating of the base of the lithospheric mantle to 1400 °C (45 mw/m²) at 7.0–7.5 GPa and to 900 °C (35 mw/m²) at 3.5–5.5 GPa in an interval corresponding to a lens enriched in chromite and clinopyroxene. The pipes from the eastern fields reveal smoother mantle geotherms and lower temperature PT paths. Mantle columns beneath the kimberlites from northern (Verkhotinskoe field) and western pipes (Kepinskoe field) show heating from the lithosphere base to 5.0 GPa and stepped PT paths shown by chromites probably due to interaction with magmas which caused local Ti-enrichment near 3.0 and 5.5 GPa. The PT paths in the mantle columns beneath the alnöite pipes reveal higher temperature and relatively shallow PT conditions with two major clusters around 3.0 and 5.0 GPa. Trace element patterns for garnets vary from S-type typical of harzburgites to those with a hump in MREE (middle REE) typical for pyroxenites. Lherzolitic garnets with sinusoidal decrease of LREE show distinctive HFSE enrichment. Trace element ratios (Sm/Er)_n and (La/Yb)_n of garnets correlate positively with pressures estimates by single grain thermobarometry (Ashchepkov et al., 2010, Ashchepkov et al., 2011, Ashchepkov et al., 2012) but only poorly with Cr₂O₃ content. Enrichment in HFSE of all garnets is related to metasomatism that accompanied the picroilmenite-forming event.Ilmenites reveal two compositional trends. One corresponds to fractionation within conduits at the lower mantle (6.0–7.0 GPa) without contamination. A second trend at <6.0 GPa, formed due to assimilation fractional crystallization (AFC), is characterized by Fe and Cr increase with decreasing pressure. Similar trace element patterns of the various in HREE in ilmenites, possibly partly due to garnet assimilation from wall rock peridotites. The PT conditions and geochemistry for the minerals from the Carboniferous sediments are similar to those from the Lomonosovskoe deposit and Arkhangelskaya pipe (Lehtonen et al., 2009).     

Petrology and geochemistry of diamondiferous Mesoproterozoic kimberlites from Wajrakarur kimberlite field,Eastern Dharwar craton,southern India: genesis and constraints on mantle source regions

The petrology and geochemistry of some new occurrences of Mesoproterozoic diamondiferous hypabyssal-facies kimberlites from the Chigicherla, Wajrakarur-Lattavaram and Kalyandurg clusters of the Wajrakarur kimberlite field (WKF), Eastern Dharwar craton (EDC), southern India, are reported. The kimberlites contain two generations of olivine, and multiple groundmass phases including phlogopite, spinel, calcite, dolomite, apatite, perovskite, apatite and rare titanite, and xenocrysts of eclogitic garnet and picro-ilmenite. Since many of the silicate minerals in these kimberlites have been subjected to carbonisation and alteration, the compositions of the groundmass oxide minerals play a crucial role in their characterisation and in understanding melt compositions. While there is no evidence for significant crustal contamination in these kimberlites, some limited effects of ilmenite entrainment are evident in samples from the Kalyandurg cluster. Geochemical studies reveal that the WKF kimberlites are less differentiated and more primitive than those from the Narayanpet kimberlite field (NKF), Eastern Dharwar craton. Highly fractionated (La/Yb = 108–145) chondrite-normalised distribution patterns with La abundances of 500–1,000 × chondrite and low heavy rare earth elements (HREE) abundances of 5–10 × chondrite are characteristic of these rocks. Metasomatism by percolating melts from the convecting mantle, rather than by subduction-related processes, is inferred to have occurred in their source regions based on incompatible element signatures. While the majority of the Eastern Dharwar craton kimberlites are similar to the Group I kimberlites of southern Africa in terms of petrology, geochemistry and Sr–Nd isotope systematics, others show the geochemical traits of Group II kimberlites or an overlap between Group I and II kimberlites. Rare earth element (REE)-based semi-quantitative forward modelling of batch melting of southern African Group I and II kimberlite source compositions involving a metasomatised garnet lherzolite and very low degrees of partial melting demonstrate that (1) WKF and NKF kimberlites display a relatively far greater range in the degree of melting than those from the on-craton occurrences from southern Africa and are similar to that of world-wide melilitites, (2) different degrees of partial melting of a common source cannot account for the genesis of all the EDC kimberlites, (3) multiple and highly heterogeneous kimberlite sources involve in the sub-continental lithospheric mantle (SCLM) in the Eastern Dharwar craton and (4) WKF and NKF kimberlites generation is a resultant of complex interplay between the heterogeneous sources and their different degrees of partial melting. These observations are consistent with the recent results obtained from inversion modelling of REE concentrations from EDC kimberlites in that both the forward as wells as inverse melting models necessitate a dominantly lithospheric, and not asthenospheric, mantle source regions. The invading metasomatic (enriching) melts percolating from the convecting (asthenosphere) mantle impart an OIB-like isotopic signature to the final melt products.     

The temporal evolution of North American kimberlites

North American kimberlite magmatism spans a period of time in excess of 1 billion years from Mesoproterozoic kimberlites in the Lake Superior and James Bay Lowlands region of Ontario to Eocene kimberlites in the Lac de Gras field, N.W.T. Based on a compilation of more than 150 robust radiometric age determinations, several distinct kimberlite emplacement patterns are recognized. In general, the temporal pattern of kimberlite emplacement in North America can be broadly subdivided into five domains: (1) a Mesoproterozoic kimberlite province in central Ontario, (2) an Eocambrian/Cambrian Labrador Sea Province in northern Québec and Labrador, (3) an eastern Jurassic Province, (4) a central Cretaceous corridor and (5) a western mixed domain that includes two Type-3 kimberlite provinces (i.e. multiple periods of kimberlite emplacement preserved in the Slave and Wyoming cratons). For some provinces the origin of kimberlite magmatism can be linked to known mantle heat sources such as mantle plume hotspots and upwelling asthenosphere attendant with continental rifting. For example, the timing and location of Mesoproterozoic kimberlites in North America coincides with and slightly precedes the timing of 1.1 Ga intracontinental rifting that culminated in the Midcontinent Rift centered in the Lake Superior region. Many of the kimberlites in the Eocambrian/Cambrian Labrador Sea province were emplaced soon after the opening of the Iapetus Ocean at about 615 Ma and may also be linked to mantle upwelling associated with continental rifting. The eastern Jurassic kimberlites record an age progression where magmatism youngs in a southeast direction from the 200 Ma Rankin Inlet kimberlites to the 155–126 Ma Timiskaming kimberlites. The location of several kimberlite fields and clusters in Ontario and Québec lie along a continental extension of the Great Meteor hotspot track and represents one of the best examples in the world of kimberlite magmatism triggered by mantle plumes. The central Cretaceous (103–94 Ma) corridor extends for more than 4000 km from Somerset Island in northern Canada through the Fort à la Corne field in Saskatchewan to the kimberlites in central USA. This is the first recognized corridor of kimberlite magmatism of this magnitude. The possible westward younging of Cretaceous to Eocene corridors of kimberlite magmatism could reflect major changes in plate geometry during subduction of the Kula–Farallon plate.     

The Archean BIF-hosted Cuiabá Gold deposit, Quadrilátero Ferrífero, Minas Gerais, Brazil

The Cuiabá Gold Deposit is located in the northern part of the Quadrilátero Ferrífero, Minas Gerais State, Brazil. The region constitutes an Archean granite–greenstone terrane composed of a basement complex (ca. 3.2 Ga), the Rio das Velhas Supergroup greenstone sequence, and related granitoids (3.0–2.7 Ga), which are overlain by the Proterozoic supracrustal sequences of the Minas (< 2.6–2.1  Ga) and Espinhaço (1.7 Ga) supergroups.The stratigraphy of the Cuiabá area is part of the Nova Lima Group, which forms the lower part of the Rio das Velhas Supergroup. The lithological succession of the mine area comprises, from bottom to top, lower mafic metavolcanics intercalated with carbonaceous metasedimentary rocks, the gold-bearing Cuiabá-Banded Iron Formation (BIF), upper mafic metavolcanics and volcanoclastics and metasedimentary rocks. The metamorphism reached the greenschist facies. Tectonic structures of the deposit area are genetically related to deformation phases D₁, D₂, D₃, which took place under crustal compression representing one progressive deformational event (E_n).The bulk of the economic-grade gold mineralization is related to six main ore shoots, contained within the Cuiabá BIF horizon, which range in thickness between 1 and 6 m. The BIF-hosted gold orebodies (> 4 ppm Au) represent sulfide-rich segments of the Cuiabá BIF, which grade laterally into non-economic mineralized or barren iron formation. Transitions from sulfide-rich to sulfide-poor BIF are indicated by decreasing gold grades from over 60 ppm to values below the fire assay detection limit in sulfide-poor portions. The deposit is “gold-only”, and shows a characteristic association of Au with Ag, As, Sb and low base-metal contents. The gold is fine grained (up to 60 μm), and is generally associated with sulfide layers, occurring as inclusions, in fractures or along grain boundaries of pyrite, the predominant sulfide mineral (> 90 vol.%). Gold is characterized by an average fineness of 0.840 and a large range of fineness (0.759 to 0.941).The country rocks to the mineralized BIF show strong sericite, carbonate and chlorite alteration, typical of greenschist facies metamorphic conditions. Textures observed on microscopic to mine scales indicate that the mineralized Cuiabá BIF is the result of sulfidation involving pervasive replacement of Fe-carbonates (siderite–ankerite) by Fe-sulfides. Gold mineralization at Cuiabá shows various features reported for Archean gold–lode deposits including the: (1) association of gold mineralization with Fe-rich host rocks; (2) strong structural control of the gold orebodies, showing remarkable down-plunge continuity (> 3 km) relative to strike length and width (up to 20 m); (3) epigenetic nature of the mineralization, with sulfidation as the major wall–rock alteration and directly associated with gold deposition; (4) geochemical signature, with mineralization showing consistent metal associations (Au–Ag–As–Sb and low base metal), which is compatible with metamorphic fluids.     

Effective resource estimates for primary diamond deposits from the EKATI Diamond Mine™, Canada

Primary economic diamond deposit modelling has rarely been documented in the public domain. This paper presents information collected from significantly diamondiferous kimberlite pipes located near Lac de Gras in the Arctic region of Canada's Northwest Territories. The resource estimation process is widely accepted as a cyclical iteration of data collection and evaluation processes. A resource database is typically assembled from a large inventory of exploration data. These data must be methodically quality checked before accepting the information for interpretive analysis. The foundation of a mineral resource model is based on clear understanding of the geology model along with subsidiary grade, volume, and density models. Defining these models is an iterative process of statistical analyses and interpretation. As a deposit progresses along a path towards development, reducing risk to acceptable levels is critical for identifying and realizing its maximum value.     

Structural control of Au–Pd mineralization (Jacutinga): An example from the Cauê Mine, Quadrilátero Ferrífero, Brazil

Precambrian banded iron formations (BIFs) in the Quadrilátero Ferrífero host a special kind of Au–Pd mineralization known as Jacutinga. The main orebodies are hosted within the Cauê Syncline, a SW-verging fold that involves Paleoproterozoic metasedimentary rocks in the Itabira District, a regional synclinorium with BIFs in the core of synclinal folds in the northeastern part of Quadrilatéro Ferrífero, Minas Gerais. Structural analysis reveals two important features of the district: the polydeformed character of the rocks and the importance of brittle structures in the control of the orebodies. Two deformational events are recognized in this area. The first event developed the main foliation, S1, that is the enveloping surface of the Cauê Syncline. The second event is better defined in the northern boundary of the structure where it is represented by a right-lateral wrench fault zone that has developed a foliation, S2, that truncates S1. This wrench fault was also responsible for the development of a system of fractures (Frm) that host the Au–Pd mineralization. The auriferous bodies of Cauê Syncline (Y, X, Área Central, Aba Norte, Noroeste and Aba Leste/Aba Leste Inferior) were generated during this second event. Shear fractures (R, R′ and P) and tension fractures (T) developed in response to the wrench fault system under brittle conditions. The best-developed, and most commonly mineralized fractures are R and T in all auriferous bodies. Elsewhere, the best mineralization occurs in the contacts of hematite bodies (soft/hard) and intrusive rocks with fractured itabirites. Other mineralization (Aba Norte, Área Central and X) is hosted on the contacts of other units.A system of fractures, as well as their intersections, thus represents the structural control on Jacutinga bodies and is responsible for the geometry of the orebodies. Of importance, there is no control by mineral/stretching lineations, fold axes and other ductile structure on the geometry and plunge of the orebodies.     

Geochemistry of contaminated komatiites from the Umburanas greenstone belt,Bahia State,Brazil

The late Archaean Umburanas greenstone belt (UGB) is located in the São Francisco Craton, southwest of Bahia State, Brazil. The lower unit of UGB comprises basal komatiite lavas and tholeiitic basalts intercalated with felsic volcanic rocks. The regional crystalline basement rocks, the Gavião block, predominantly consist of granitic, granodioritic and migmatitic gneiss along with tonalite-trondhjemite-granodiorite (TTG) associations.Petrographic studies of UGB komatiites reveal characteristic spinifex igneous texture although primary mineralogy is rarely preserved. Based on textural relationships, komatiites are divided into cumulate, spinifex, and massive types. The MgO content varies in the range 31.5–40.4 wt%. The MgO–SiO₂ negative correlation in komatiites suggests olivine fractionation trend. The UGB komatiites are of Al-undepleted type, characterized by Al₂O₃/TiO₂ (21–48) ratio, enriched in highly incompatible LILE relative to moderately incompatible HFSE and distinct negative Nb, Sr and Eu anomalies. Also shows depletion of light rare earths, convex-downward rare earth patterns typically not observed in komatiites world-wide, and primitive mantle normalized Gd/Yb (1.03–1.23) and La/Sm (2.36–4.99) ratios. The negative Eu anomaly is attributed to the circulation of H₂O-rich fluid, whereas the negative Nb and Sr anomalies are attributed to contamination from granitic basement rocks of the Gavião block.The UGB komatiites are most likely derived from adiabatic decompressional melting of a mantle plume. The melting took place at liquidus temperatures in the range 1572–1711 °C, which is consistent with mantle-plume origin invoked for several other komatiites in Archaean greenstone belts elsewhere. The melts were more likely generated at a depth shallower than 100 km (pressure < 2.5 GPa) where garnet was absent in the source mineralogy. Geochemical characteristics suggest contamination of primary melts with granitic basement rocks either during ascent of melt or during emplacement of magma in a continental basin setting. Greenschist to low-T amphibolite facies metamorphism at ∼2Ga may also have played a role in modifying the original komatiite petrography and composition.     

Nature and origin of the BIF-hosted São Bento gold deposit, Quadrilátero Ferrífero, Brazil, with special emphasis on structural controls

The orogenic banded iron formation (BIF)-hosted Au mineralization at São Bento is a structurally-controlled, hydrothermal deposit hosted by Archean rocks of the Rio das Velhas greenstone belt, Quadrilátero Ferrífero region, Brazil. The deposit has reserves of 14.3 t Au and historical (underground) production of 44.6 t Au between 1987 and 2001. The oxide-facies São Bento BIF is mineralized at its lower portion, where in contact with carbonaceous, pelitic schists, particularly in the proximity of sulfide-bearing quartz veins. Shear-related Au deposition is associated with the pervasive, hydrothermal sulfidation (mainly arsenopyrite) of the Fe-rich bands of the São Bento BIF. Auriferous, sulfide- and quartz-rich zones represent proximal alteration zones. They are enveloped by ankerite-dominated haloes, which reflect progressive substitution of siderite and magnetite within the BIF by ankerite and pyrrhotite, respectively. The São Bento BIF was intensely and extensively deformed, first into open, upright folds that evolved into tight, asymmetric, isoclinal folds. The inverse limb of these folds attenuated and gave way to sheath folds and the establishment of ductile thrusts. Mineralized horizons at São Bento result from early structural modifications imposed by major transcurrent and thrusts faults, comprising the Conceição, Barão de Cocais and São Bento shear zones. Dextral movement on the SW–NE-directed Conceição shear zone may have generated splays at a compressional side-stepping zone, such as the São Bento shear zone, which is the structural locus for the São Bento gold mineralization. Relaxation of the Conceição shear zone under more brittle conditions resulted in the development of dilatational zones where gold–sulfide–quartz veins formed. These structures are considered to have been generated in the Archean. Geochronological data are scarce, with Pb–Pb analyses of refractory arsenopyrite and pyrite from bedded and remobilized ore plotting on a single-stage growth curve at 2.65 Ga. A later compressional, ductile deformation of unknown age overprinted, rotated and flattened the original, N60E-directed structure of the whole rock succession, with development of planar and linear fabrics that appear similar to Proterozoic-aged structures. Fluid inclusion studies indicate low salinity, aqueous fluids, with or without CO₂ and/or CH₄, with extremely variable CO₂/CH₄ ratios, of probable metamorphic origin. Fluid evolution shows a paragenetic decrease in the carbonic phase from 10–15% to 5%, and increase in the H₂O/(CO₂ + CH₄) and CO₂/CH₄ ratios, suggesting important interaction with carbonaceous sediment. Trapping conditions indicate a temperature of 300 °C at 3.2 kbar.     

The Araçuaí-West-Congo Orogen in Brazil: an overview of a confined orogen formed during Gondwanaland assembly

The Neoproterozoic Adamastor-Brazilide Ocean was generated during the breakup of the Rodinia supercontinent, and remnants of its oceanic lithosphere have been found in the Brasiliano-Pan African orogenic system that includes the Araçuaí, West-Congo, Brasília, Ribeira, Kaoko, Dom Feliciano, Damara and Gariep belts. The Araçuaí and the West-Congo belts are counterparts of the same Neoproterozoic orogen. The first belt comprises two thirds of the Araçuaí-West-Congo Orogen. This orogen is rather unique owing to its confined nature within the embayment outlined by the São Francisco and Congo cratons. In spite of this, the presence of ophiolitic remnants, and a calc-alkaline magmatic arc, indicate that the basin/orogen evolution comprise both oceanic spreading and consumption. It is assumed that coeval Paramirim and Sangha aulacogens played a key role by making room for the Araçuaí-West-Congo Basin. Sedimentary successions record all major stages of a basin that evolved from continental rift, when glaciation-related sedimentation was very significant, to passive margin. Rifting started around 1.0–0.9 Ga. The oceanic stage is constrained by an ophiolitic remnant dated at 0.8 Ga. If the cratonic bridge that once linked the São Francisco and Congo palaeocontinental regions did not hinder the opening of an ocean basin, it certainly limited its width. As a consequence, only a narrow oceanic lithosphere was generated, and it was subducted afterwards. This is also suggested by orogenic calc-alkaline granitoids occuping a small area of the orogen. Geochronological data for pre-, syn- and late-collisional granitoids indicate that the orogenic stage lasted from 625 Ma to 570 Ma. A period of magmatic quiescence was followed by intrusion of postcollisional plutons at 535–500 Ma. The features of the Araçuaí-West-Congo Orogen suggest the development of a complete Wilson Cycle in a branch of the Adamastor Ocean, which can be interpreted as a gulf with limited generation of oceanic lithosphere.     

Geology of the Mwadui kimberlite, Shinyanga district, Tanzania

The Mwadui pipe represents the largest diamondiferous kimberlite ever mined and is an almost perfectly preserved example of a kimberlitic crater in-fill, albeit without the tuff ring.

The geology of Mwadui can be subdivided into five geological units, viz. the primary pyroclastic kimberlite (PK), re-sedimented volcaniclastic kimberlite deposits (RVK), granite breccias (subdivided into two units), the turbidite deposits, and the yellow shales listed in approximate order of formation. The PK can be further subdivided into two units—lithic-rich ash and lapilli tuffs which dominate the succession, and lithic-poor juvenile-rich ash and lapilli tuffs. The lower crater is well bedded down to at least 684 m from present surface (extent of current drill data). The bedding is defined by the presence of juvenile-rich lapilli tuffs vs. lithic-rich lapilli tuffs, and the systematic variation in granite content and clast size within much of the lithic-rich lapilli tuffs. Four distinct types of bedding have been identified in the pyroclastic deposits. Diffuse zones characterised by increased granite abundance and size, and upward-fining units, represent the dominant types throughout the deposit.

Lateral heterogeneity was observed, in addition to the vertical changes, suggesting that the eruption was quite heterogeneous, or that more than one vent may have been present. The continuous nature of the bedding in the pyroclastic material and the lack of ash-partings suggest deposition from a high concentration (ejecta), sustained eruption column at times, e.g. the massive, very diffusely stratified deposits. The paucity of tractional bed forms suggest near vertical particle trajectories, i.e. a clear air-fall component, but the poorly sorted, matrix-supported nature of the deposits suggest that pyroclastic flow and/or surge processes may also have been active during the eruption.

Available diamond sampling data were examined and correlated with the geology. Data derive from the old 120 (37 m), 200 (61 m), 300 (92 m) and 1200 ft (366 m) levels, pits sunk during historical mining operations, drill logs, as well as more recent bench mapping. Correlating macro-diamond sample data and geology shows a clear relationship between diamond grade and lithology. Localised enrichment and dilution of the primary diamond grade has taken place in the upper reworked volcaniclastic deposits due to post-eruptive sedimentary in-fill processes. Clear distinction can be drawn between upper (re-sedimented) and lower (pyroclastic) crater deposits at Mwadui, both from a geological and diamond grade perspective.

Finally, an emplacement model for the Mwadui kimberlite is proposed. Geological evidence suggests that little or no sedimentary cover existed at the time of emplacement. The nature of the bedding within the pyroclastic deposits and the continuity of the bedding in the vertical dimension suggest that the eruption was continuous, but that the eruption column may have been heterogeneous, both petrologically as well as geometrically. Volcanic activity appears to have ceased thereafter and the crater was gradually filled with granite debris from the unstable crater walls and re-sedimented volcaniclastic material derived from the tuff ring.

The Mwadui kimberlite exhibits marked similarities compared to the Orapa kimberlite in Botswana.     

An epigenetic origin for the Passagem de Mariana gold deposit, Quadrilátero Ferrífero, Minas Gerais, Brazil

The gold–tourmaline quartz–vein deposit of Passagem de Mariana, in the southeastern part of the Quadrilátero Ferrífero, produced more than 60 tonne of gold, from the end of the 17th Century until 1954. The mine has not operated since 1985. Orebodies are veins composed of white quartz (> 60 vol.%), carbonate (ankerite), tourmaline, sericite and sulfides. Tourmaline (dravite), up to 10 vol.% of the vein, occurs as subhedral, coarse, commonly zoned crystals, and is concentrated along vein boundaries and on the edges of host rock inclusions in the veins. Tourmaline is present in all rock types in the mine, but the chemical composition of the host rocks determinates the intensity of tourmalinization, with the alteration being greater in sericitic phyllites, graphite–sericite phyllites, and calcareous rocks. The most abundant sulfide is arsenopyrite, which is normally associated with pyrite and pyrrhotite. Minor amounts of chalcopyrite, galena, löllingite, berthierite, and maldonite are present throughout the deposit. Sulfides are concentrated at veins boundary or are dispersed in the veins. Arsenopyrite is associated, most commonly, with calcareous rocks, and graphite–sericite phyllite. Pyrrhotite is usually found at the base of itabirites. Gold abundance is directly proportional to sulfide concentration. Hydrothermal alteration associated with the veins includes silicification, tourmalinization, and sulfidation. The mineralized zone is a shear zone associated with a bedding-parallel thrust fault that juxtaposes the itabirite (Lower Proterozoic Minas Supergroup) over other units. This shear zone/thrust fault extends for tens of km beyond the Passagem mine and hosts numerous gold deposits. The richest orebodies are along the itabirite footwall contact and within the graphite–sericite phyllite (Main orebody). Although many lithologic units were mineralized the graphite–sericite phyllite appears to have been most favorable for gold deposition.The area underwent three phases of deformation, D₁, D₂ and D₃. Mineral assemblages indicate upper-greenschist to lower-amphibolite conditions of regional metamorphism. Retrograde metamorphism, characterized by chloritization of biotite and chloritization and biotitization of garnet, developed locally. The gold-bearing veins crosscut the main foliation and lithologic contacts at low angle and occur within, or are in contact with, all lithotypes. Field and laboratory data indicate that gold mineralization at Passagem de Mariana is epigenetic. Gold deposition occurred after the peak of metamorphism, within the late- to post-D₂ period of deformation, which is correlated with second set of structures of Trasamazonian age of Alkmim and Marshak [Alkmim, F.F., Marshak, S., 1998. Transamazonian Orogeny in the Southern São Francisco Craton Region, Minas Gerais, Brazil: evidence for Paleoproterozoic collision and collapse in the Quadrilátero Ferrífero. Precambrian Research 90, 29-58.], indicating that the gold mineralization occurred between 2.124 and 2.04 Ga. We choose to regard Passagem de Marina as an orogenic gold deposit as defined by Groves et al. [Groves, D. I., Goldfarb, R.J., Gebre-Mariam, M., Hagemann, S.G., Robert, F., 1998. Orogenic gold deposits: A proposed classification in the context of their crustal distribution and relationship to other gold deposit types. Ore Geology Reviews 13, 7-27.], i.e., an epigenetic, structurally-hosted lode–gold vein system in a deformed metamorphic terrane.     

Structural control and hydrothermal alteration at the BIF-hosted Raposos lode-gold deposit, Quadrilátero Ferrífero, Brazil

In the Raposos orogenic gold deposit, hosted by banded iron-formation (BIF) of the Archean Rio das Velhas greenstone belt, the hanging wall rocks to BIF are hydrothermally-altered ultramafic schists, whereas metamafic rocks and their hydrothermal schistose products represent the footwall. Planar and linear structures at the Raposos deposit define three ductile to brittle deformational events (D₁, D₂ and D₃). A fourth group of structures involve spaced cleavages that are considered to be a brittle phase of D₃. The orebodies constitute sulfide-bearing D₁-related shear zones of BIF in association with quartz veins, and result from the sulfidation of magnetite and/or siderite. Pyrrhotite is the main sulfide mineral, followed by lesser arsenopyrite and pyrite. At level 28, the hydrothermal alteration of the mafic and ultramafic wall rocks enveloping BIF define a gross zonal pattern surrounding the ore zones. Metabasalt comprises albite, epidote, actinolite and lesser Mg/Fe–chlorite, calcite and quartz. The incipient stage includes the chlorite and chlorite-muscovite alteration zone. The least-altered ultramafic schist contains Cr-bearing Mg-chlorite, actinolite and talc, with subordinate calcite. The incipient alteration stage is subdivided into the talc–chlorite and chlorite–carbonate zone. For both mafic and ultramafic wall rocks, the carbonate–albite and carbonate–muscovite zones represent the advanced alteration stage.Rare earth and trace element analyses of metabasalt and its alteration products suggest a tholeiitic protolith for this wall rock. In the case of the ultramafic schists, the precursor may have been peridotitic komatiite. The Eu anomaly of the Raposos BIF suggests that it was formed proximal to an exhalative hydrothermal source on the ocean floor. The ore fluid composition is inferred by hydrothermal alteration reactions, indicating it to having been H₂O-rich containing CO₂ + Na⁺ and S. Since the distal alteration halos are dominated by hydrated silicate phases (mainly chlorite), with minor carbonates, fixation of H₂O is indicated. The CO₂ is consumed to form carbonates in the intermediate alteration stage, in halos around the chlorite-dominated zones. These characteristics suggest variations in the H₂O to CO₂-ratio of the sulfur-bearing, aqueous-carbonic ore fluid, which interacted at varying fluid to rock ratios with progression of the hydrothermal alteration.     

Petrology and geochemistry of a diamondiferous lherzolite from the Premier diamond mine, South Africa

This paper reports on the petrology and geochemistry of a diamondiferous peridotite xenolith from the Premier diamond mine in South Africa.

The xenolith is altered with pervasive serpentinisation of olivine and orthopyroxene. Garnets are in an advanced state of kelyphitisation but partly fresh. Electron microprobe analyses of the garnets are consistent with a lherzolitic paragenesis (8.5 wt.% Cr₂O₃ and 6.6 wt.% CaO). The garnets show limited variation in trace element composition, with generally low concentrations of most trace elements, e.g. Y (<11 ppm), Zr (<18 ppm) and Sr (<0.5 ppm). Garnet rare earth element concentrations, when normalised against the C1 chondrite of McDonough and Sun (Chem. Geol. 120 (1995) 223), are characterised by a rare earth element pattern similar to garnet from fertile lherzolite.

All diamonds recovered are colourless. Most crystals are sharp-edged octahedra, some with minor development of the dodecahedral form. A number of crystals are twinned octahedral macles, while aggregates of two or more octahedra are also common. Mineral inclusions are rare. Where present they are predominantly small black rosettes believed to consist of sulfide. In one instance a polymineralic (presumably lherzolitic) assemblage of reddish garnet, green clinopyroxene and a colourless mineral is recognised.

Infrared analysis of the xenolith diamonds show nitrogen contents generally lower than 500 ppm and variable nitrogen aggregation state, from 20% to 80% of the ‘B’ form. When plotted on a nitrogen aggregation diagram a well defined trend of increasing nitrogen aggregation state with increasing nitrogen content is observed. Carbon isotopic compositions range from −3.6 ‰ to −1.3 ‰. These are broadly correlated with diamond nitrogen content as determined by infrared spectroscopy, with the most negative C-isotopic compositions correlating with the lowest nitrogen contents.

Xenolith mantle equilibration temperatures, calculated from nitrogen aggregation systematics as well as the Ni in garnet thermometer are on the order of 1100 to 1200 °C.

It is concluded that the xenolith is a fertile lherzolite, and that the lherzolitic character may have resulted from the total metasomatic overprinting of pre-existing harzburgite. Metasomatism occurred prior to, or accompanied, diamond growth.     

The geology of the Morro Velho gold deposit in the Archean Rio das Velhas greenstone belt, Quadrilátero Ferrífero, Brazil

The Morro Velho gold deposit, Quadrilátero Ferrífero region, Minas Gerais, Brazil, is hosted by rocks at the base of the Archean Rio das Velhas greenstone belt. The deposit occurs within a thick carbonaceous phyllite package, containing intercalations of felsic and intermediate volcaniclastic rocks and dolomites. Considering the temporal and spatial association of the deposit with the Rio das Velhas orogeny, and location in close proximity to a major NNW-trending fault zone, it can be classified as an orogenic gold deposit. Hydrothermal activity was characterized by intense enrichment in alteration zones of carbonates, sulfides, chlorite, white mica±biotite, albite and quartz, as described in other Archean lode-type gold ores. Two types of ore occur in the deposit: dark gray quartz veins and sulfide-rich gold orebodies. The sulfide-rich orebodies range from disseminated concentrations of sulfide minerals to massive sulfide bodies. The sulfide assemblage comprises (by volume), on average, 74% pyrrhotite, 17% arsenopyrite, 8% pyrite and 1% chalcopyrite. The orebodies have a long axis parallel to the local stretching lineation, with continuity down the plunge of fold axis for at least 4.8 km. The group of rocks hosting the Morro Velho gold mineralization is locally referred to as lapa seca. These were isoclinally folded and metamorphosed prior to gold mineralization. The lapa seca and the orebodies it hosts are distributed in five main tight folds related to F1 (the best examples are the X, Main and South orebodies, in level 25), which are disrupted by NE- to E-striking shear zones. Textural features indicate that the sulfide mineralization postdated regional peak metamorphism, and that the massive sulfide ore has subsequently been neither metamorphosed nor deformed. Lead isotope ratios indicate a model age of 2.82 ± 0.05 Ga for both sulfide and gold mineralization. The lapa seca are interpreted as the results of a pre-gold alteration process and may be divided into carbonatic, micaceous and quartzose types. The carbonatic lapa seca is subdivided into gray and brown subtypes. Non-mineralized, gray carbonatic lapa seca forms the hanging wall to the orebodies, and is interpreted as the product of extreme CO₂ metasomatism during hydrothermal alteration. This dolomitic lapa seca ranges in composition from relatively pure limestone and dolomite to silty limestone and dolomite. The brown carbonatic and micaceous lapa secas are the host rocks to gold. These units are interpreted to correspond to the sheared and hydrothermal products of metamorphosed volcaniclastic and/or volcanic rocks of varying composition from dacitic to andesitic, forming various types of schists and phyllites. The high-grade, massive sulfide orebodies occur at the base of the gray carbonatic lapa seca. Both disseminated mineralization and quartz veins are hosted by micaceous lapa seca. The data are consistent with a model of epigenetic mineralization for the lapa seca, from a hydrothermal fluid derived in part from the Archean basement or older crust material.     

Layered mantle at the Karelian Craton margin: P–T of mantle xenocrysts and xenoliths from the Kaavi–Kuopio kimberlites, Finland

Peridotitic clinopyroxene (cpx) and pyrope garnet xenocrysts from four kimberlite pipes in the Kaavi–Kuopio area of Eastern Finland have been studied using major and trace element geochemistry to obtain information on the vertical compositional variability of the underlying mantle. The xenocryst data, when combined with the petrological constraints provided by peridotite xenoliths, yield a relatively complete section through the lithospheric mantle. Single-grain cpx thermobarometry fits with a 36-mW/m² geotherm calculated using heat flow constraints and xenolith modes and geophysical properties. Ni thermometry on pyrope xenocrysts gives 700–1350 °C and, based on the cpx xenocryst/xenolith geotherm, indicates a wide sampling interval, ca. 80–230 km. Plotting pyrope major and trace element compositions as a function of temperature shows there are three distinct layers in the local lithospheric mantle:

(1) A low-temperature (<850 °C) harzburgite layer distinguished by Ca-rich but Ti-, Y- and Zr-depleted pyropes. The xenoliths originating from this layer are all fine-grained garnet-spinel harzburgites with secondary cpx.

(2) A variably depleted lherzolitic, harzburgitic and wehrlitic horizon from 950 to 1150 °C or 130 to 180 km.

(3) A deep layer from 180 to 240 km composed largely of fertile material.

The peridotitic diamond window at Kaavi–Kuopio stretches from the top of the diamond stability field at 140 km to the base of the harzburgite-bearing mantle at about 180 km, implying a roughly 40-km-wide prospective zone.     

The evolution of refertilized lithospheric mantle beneath the northeastern Siberian craton: Links between mantle metasomatism,thermal state and diamond potential

Although the diamond potential of cratons is linked mainly to thick and depleted Archean lithospheric keels, there are examples of craton-edge locations and circum-cratonic Proterozoic terranes underlain by diamondiferous mantle. Here, we use the results of comprehensive major and trace-element studies of detrital garnets from diamond-rich Late Triassic (Carnian) sedimentary rocks in the northeastern Siberia to constrain the thermal and chemical state of the pre-Triassic mantle and its ability to sustain the diamond storage. The studied detrital mantle-derived garnets are dominated by low- to medium-Cr lherzolitic (～45%) and low-Cr megacrystic (～39%) chemistries, with a significant proportion of eclogitic garnets (～11%), and only subordinate contribution from harzburgitic garnets (～5%) with variable Cr₂O₃ contents (1.2–8.4 wt.%). Low-Cr megacrysts display uniform, “normal” rare-earth element (REE) patterns with no Eu/Eu* anomalies, systematic Zr and Ti enrichment (mainly within 2.5–5), which are evidence of their crystallization from deep metasomatic melts. Lherzolitic (G9) garnets exhibit normal or humped to MREE-depleted sinusoidal REE patterns and elevated Nd/Y (up to 0.33–0.41) and Zr/Y ratios (up to 7.62). Rare low- to high-Cr harzburgitic (G10) garnets have primarily “depleted”, sinusoidal REE-patterns, low Ti, Y and HREE, but vary significantly in Zr-Hf, Ti and MREE-HREE contents, Nd/Y (within 0.1–2.4) and Zr/Y (1.53–19.9) ratios. The observed trends of chemical enrichment from the most depleted, harzburgitic garnets towards lherzolitic (including high-Ti high-Cr G11-type) garnets and megacrysts result from either voluminous high-temperature metasomatism by plume-derived silicate melts or recurrent mobilization of less voluminous kimberlitic or related carbonated mantle melts, rather than the initially primitive, fertile nature of the Proterozoic SCLM. Calculated Ni-in-garnet temperatures (primarily within ～1150–1250 °C) indicate their derivation from at least ～220 km thick Cr-undersaturated lithosphere at the relevant Devonian to Triassic thermal flow of ～45 mW/m² or cooler. We suggest the existence of rare harzburgitic domains in the primarily lherzolitic diamond-facies SCLM beneath the northeastern Siberian craton at least by Triassic, whereas the abundance of eclogitic garnets, predominance of E-type inclusions in placer diamonds and specific morphologies argue for diamondiferous eclogites occurring within a ～50–65 kbar diamond window of the Olenek province by the same time.     

Petrology of the Renard igneous bodies: host rocks for diamond in the northern Otish Mountains region, Quebec

The Renard igneous bodies were discovered in late 2001 as part of a regional diamond exploration program launched by Ashton Mining of Canada and SOQUEM. Nine bodies have been discovered within a 2-km-diameter area, and are comprised of root zone to lower diatreme facies rocks including kimberlitic breccia, olivine macrocrystic hypabyssal material, and brecciated country rock with minor amounts of kimberlitic material. Many mineralogical and petrographic features are common to both kimberlite and melnoite, and strict assignment of the rocks as kimberlite is not possible with these criteria alone. Whole rock trace element compositions suggest a closer affinity to Group I kimberlite, with derivation from a garnet-bearing mantle. Exceptions to conventional classification of the rocks along petrographic or mineralogical lines may be due in part to assimilation of felsic country rock into the Renard magmas at the time of emplacement. The Renard magmas were emplaced into northeastern Laurentia at 630 Ma, when the supercontinent was undergoing a change from convergent margin magmatism to rifting, the latter being associated ultimately with the opening of the Iapetus ocean.